add the HPC Cache examples

src/terraform/README.md

@@ -8,12 +8,12 @@ The examples show how to deploy HPC Cache and Avere vFXT from minimal configurat
 
 1. [HPC Cache](examples/HPC%20Cache)
    1. [no-filer example](examples/HPC%20Cache/no-filers)
-   2. [Avere vFXT against 1 IaaS NAS filer example](examples/HPC%20Cache/1-filer)
+   2. [HPC Cache mounting 1 IaaS NAS filer example](examples/HPC%20Cache/1-filer)
-   3. [Avere vFXT against 3 IaaS NAS filers example](examples/HPC%20Cache/3-filers)
+   3. [HPC Cache mounting 3 IaaS NAS filers example](examples/HPC%20Cache/3-filers)
 2. [Avere vFXT](examples/vfxt)
    1. [no-filer example](examples/vfxt/no-filers)
-   2. [Avere vFXT against 1 IaaS NAS filer example](examples/vfxt/1-filer)
+   2. [Avere vFXT mounting 1 IaaS NAS filer example](examples/vfxt/1-filer)
-   3. [Avere vFXT against 3 IaaS NAS filers example](examples/vfxt/3-filers)
+   3. [Avere vFXT mounting 3 IaaS NAS filers example](examples/vfxt/3-filers)
    4. [Avere vFXT optimized for Houdini](examples/vfxt/HoudiniOptimized)
 3. [NFS Filers](examples/nfsfilers)
    1. [L32sv1](examples/nfsfilers/L32sv1)

src/terraform/examples/HPC Cache/1-filer/README.md

@@ -0,0 +1,42 @@
+# HPC Cache Deployment with 1 NFS Filer
+
+This example shows how to deploy an HPC Cache mounting 1 NFS Filer.
+
+This example currently uses `azurerm_template_deployment` to deploy a template, but will be replaced soon by a native azurerm module.
+
+This examples configures a render network, controller, and HPC Cache with 1 filer as shown in the diagram below:
+
+![The architecture](../../../../../docs/images/terraform/1filer-hpcc.png)
+
+## Deployment Instructions
+
+To run the example, execute the following instructions.  This assumes use of Azure Cloud Shell.  If you are installing into your own environment, you will need to follow the [instructions to setup terraform for the Azure environment](https://docs.microsoft.com/en-us/azure/terraform/terraform-install-configure).
+
+1. browse to https://shell.azure.com
+
+2. Specify your subscription by running this command with your subscription ID:  ```az account set --subscription YOUR_SUBSCRIPTION_ID```.  You will need to run this everytime after restarting your shell, otherwise it may default you to the wrong subscription, and you will see an error similar to `azurerm_public_ip.vm is empty tuple`.
+
+3. double check your [HPC Cache pre-requistes](https://docs.microsoft.com/en-us/azure/hpc-cache/hpc-cache-prereqs)
+
+4. get the terraform examples
+```bash
+mkdir tf
+cd tf
+git init
+git remote add origin -f https://github.com/Azure/Avere.git
+git config core.sparsecheckout true
+echo "src/terraform/*" >> .git/info/sparse-checkout
+git pull origin master
+```
+
+6. `cd src/terraform/examples/HPC\ Cache/1-filer`
+
+7. edit the local variables section at the top of the file `main.tf`, to customize to your preferences
+
+8. execute `terraform init` in the directory of `main.tf`.
+
+9. execute `terraform apply -auto-approve` to build the HPC Cache cluster
+
+Once installed you will be able to mount the HPC Cache cluster login according to the [documentation](https://docs.microsoft.com/en-us/azure/hpc-cache/hpc-cache-mount).
+
+When you are done using the cluster, you can destroy it by running `terraform destroy -auto-approve` or just delete the three resource groups created.

src/terraform/examples/HPC Cache/1-filer/main.tf

@@ -0,0 +1,150 @@
+// customize the HPC Cache by adjusting the following local variables
+locals {
+    // the region of the deployment
+    location = "eastus"
+    
+    // network details
+    network_resource_group_name = "network_resource_group"
+    
+    // vfxt details
+    hpc_cache_resource_group_name = "hpc_cache_resource_group"
+
+    // HPC Cache Throughput SKU - 3 allowed values for throughput (GB/s) of the cache
+    //    Standard_2G
+    //    Standard_4G
+    //    Standard_8G
+    cache_throughput = "Standard_2G"
+
+    // HPC Cache Size - 5 allowed sizes (GBs) for the cache
+    //     3072
+    //     6144
+    //    12288
+    //    24576
+    //    49152
+    cache_size = 12288
+
+    // unique name for cache
+    cache_name = "uniquename"
+
+    // usage model
+    //    WRITE_AROUND
+    //    READ_HEAVY_INFREQ
+    //    WRITE_WORKLOAD_15
+    usage_model = "READ_HEAVY_INFREQ"
+
+    // filer related variables
+    vm_admin_username = "azureuser"
+    // use either SSH Key data or admin password, if ssh_key_data is specified
+    // then admin_password is ignored
+    vm_admin_password = "PASSWORD"
+    // if you use SSH key, ensure you have ~/.ssh/id_rsa with permission 600
+    // populated where you are running terraform
+    vm_ssh_key_data = null //"ssh-rsa AAAAB3...."
+    
+    // filer details
+    filer_resource_group_name = "filer_resource_group"
+}
+
+provider "azurerm" {
+    version = "~>2.0.0"
+    features {}
+}
+
+// the render network
+module "network" {
+    source              = "../../../modules/render_network"
+    resource_group_name = local.network_resource_group_name
+    location            = local.location
+}
+
+resource "azurerm_resource_group" "hpc_cache_rg" {
+  name     = local.hpc_cache_resource_group_name
+  location = local.location
+  // the depends on is necessary for destroy.  Due to the
+  // limitation of the template deployment, the only
+  // way to destroy template resources is to destroy
+  // the resource group
+  depends_on = [module.network]
+}
+
+data "azurerm_subnet" "vnet" {
+  name                 = module.network.cloud_cache_subnet_name
+  virtual_network_name = module.network.vnet_name
+  resource_group_name  = local.network_resource_group_name
+}
+
+// load the HPC Cache Template, with the necessary variables
+locals {
+    arm_template = templatefile("${path.module}/../hpc_cache.json",
+    {
+        uniquename   = local.cache_name,
+        location     = local.location,
+        hpccsku      = local.cache_throughput,
+        subnetid     = data.azurerm_subnet.vnet.id,
+        hpccachesize = local.cache_size
+    })
+}
+
+// HPC cache is currently deployed using azurerm_template_deployment as described in
+// https://www.terraform.io/docs/providers/azurerm/r/template_deployment.html. 
+// The only way to destroy a template deployment is to destroy the associated
+// RG, so keep each template unique to its RG. 
+resource "azurerm_template_deployment" "storage_cache" {
+  name                = "hpc_cache"
+  resource_group_name = azurerm_resource_group.hpc_cache_rg.name
+  deployment_mode     = "Incremental"
+  template_body       = local.arm_template
+}
+
+resource "azurerm_resource_group" "nfsfiler" {
+  name     = local.filer_resource_group_name
+  location = local.location
+}
+
+// the ephemeral filer
+module "nasfiler1" {
+    source = "../../../modules/nfs_filer"
+    resource_group_name = azurerm_resource_group.nfsfiler.name
+    location = azurerm_resource_group.nfsfiler.location
+    admin_username = local.vm_admin_username
+    admin_password = local.vm_admin_password
+    ssh_key_data = local.vm_ssh_key_data
+    vm_size = "Standard_D2s_v3"
+    unique_name = "nasfiler1"
+
+    // network details
+    virtual_network_resource_group = local.network_resource_group_name
+    virtual_network_name = module.network.vnet_name
+    virtual_network_subnet_name = module.network.cloud_filers_subnet_name
+}
+
+// load the Storage Target Template, with the necessary variables
+locals {
+    storage_target_1_template = templatefile("${path.module}/../storage_target.json",
+    {
+        uniquename              = local.cache_name,
+        uniquestoragetargetname = "storage_target_1"
+        location                = local.location,
+        nfsaddress              = module.nasfiler1.primary_ip,
+        usagemodel              = local.usage_model,
+        namespacepath_j1        = "/nfs1data",
+        nfsexport_j1            = module.nasfiler1.core_filer_export
+        targetPath_j1           = ""
+    })
+}
+
+resource "azurerm_template_deployment" "storage_target1" {
+  name                = "storage_target_1"
+  resource_group_name = azurerm_resource_group.hpc_cache_rg.name
+  deployment_mode     = "Incremental"
+  template_body       = local.storage_target_1_template
+
+  depends_on = [
+    azurerm_template_deployment.storage_cache, // add after cache created
+    module.nasfiler1
+  ]
+}
+
+output "mount_addresses" {
+  value = azurerm_template_deployment.storage_cache.outputs["mountAddresses"]
+}

src/terraform/examples/HPC Cache/3-filers/README.md

@@ -0,0 +1,42 @@
+# HPC Cache Deployment with 3 NFS Filers
+
+This example shows how to deploy an HPC Cache mounting 3 NFS Filers.
+
+This example currently uses `azurerm_template_deployment` to deploy a template, but will be replaced soon by a native azurerm module.
+
+This examples configures a render network, controller, and HPC Cache with 3 filers as shown in the diagram below:
+
+![The architecture](../../../../../docs/images/terraform/3filers-hpcc.png)
+
+## Deployment Instructions
+
+To run the example, execute the following instructions.  This assumes use of Azure Cloud Shell.  If you are installing into your own environment, you will need to follow the [instructions to setup terraform for the Azure environment](https://docs.microsoft.com/en-us/azure/terraform/terraform-install-configure).
+
+1. browse to https://shell.azure.com
+
+2. Specify your subscription by running this command with your subscription ID:  ```az account set --subscription YOUR_SUBSCRIPTION_ID```.  You will need to run this everytime after restarting your shell, otherwise it may default you to the wrong subscription, and you will see an error similar to `azurerm_public_ip.vm is empty tuple`.
+
+3. double check your [HPC Cache pre-requistes](https://docs.microsoft.com/en-us/azure/hpc-cache/hpc-cache-prereqs)
+
+4. get the terraform examples
+```bash
+mkdir tf
+cd tf
+git init
+git remote add origin -f https://github.com/Azure/Avere.git
+git config core.sparsecheckout true
+echo "src/terraform/*" >> .git/info/sparse-checkout
+git pull origin master
+```
+
+6. `cd src/terraform/examples/HPC\ Cache/3-filer`
+
+7. edit the local variables section at the top of the file `main.tf`, to customize to your preferences
+
+8. execute `terraform init` in the directory of `main.tf`.
+
+9. execute `terraform apply -auto-approve` to build the HPC Cache cluster
+
+Once installed you will be able to mount the HPC Cache cluster login according to the [documentation](https://docs.microsoft.com/en-us/azure/hpc-cache/hpc-cache-mount).
+
+When you are done using the cluster, you can destroy it by running `terraform destroy -auto-approve` or just delete the three resource groups created.

src/terraform/examples/HPC Cache/3-filers/main.tf

@@ -0,0 +1,238 @@
+// customize the HPC Cache by adjusting the following local variables
+locals {
+    // the region of the deployment
+    location = "eastus"
+    
+    // network details
+    network_resource_group_name = "network_resource_group"
+    
+    // vfxt details
+    hpc_cache_resource_group_name = "hpc_cache_resource_group"
+
+    // HPC Cache Throughput SKU - 3 allowed values for throughput (GB/s) of the cache
+    //    Standard_2G
+    //    Standard_4G
+    //    Standard_8G
+    cache_throughput = "Standard_2G"
+
+    // HPC Cache Size - 5 allowed sizes (GBs) for the cache
+    //     3072
+    //     6144
+    //    12288
+    //    24576
+    //    49152
+    cache_size = 12288
+
+    // unique name for cache
+    cache_name = "uniquename"
+
+    // usage model
+    //    WRITE_AROUND
+    //    READ_HEAVY_INFREQ
+    //    WRITE_WORKLOAD_15
+    usage_model = "READ_HEAVY_INFREQ"
+
+    // filer related variables
+    vm_admin_username = "azureuser"
+    // use either SSH Key data or admin password, if ssh_key_data is specified
+    // then admin_password is ignored
+    vm_admin_password = "PASSWORD"
+    // if you use SSH key, ensure you have ~/.ssh/id_rsa with permission 600
+    // populated where you are running terraform
+    vm_ssh_key_data = null //"ssh-rsa AAAAB3...."
+    
+    // filer details
+    filer_resource_group_name = "filer_resource_group"
+}
+
+provider "azurerm" {
+    version = "~>2.0.0"
+    features {}
+}
+
+// the render network
+module "network" {
+    source              = "../../../modules/render_network"
+    resource_group_name = local.network_resource_group_name
+    location            = local.location
+}
+
+resource "azurerm_resource_group" "hpc_cache_rg" {
+  name     = local.hpc_cache_resource_group_name
+  location = local.location
+  // the depends on is necessary for destroy.  Due to the
+  // limitation of the template deployment, the only
+  // way to destroy template resources is to destroy
+  // the resource group
+  depends_on = [module.network]
+}
+
+data "azurerm_subnet" "vnet" {
+  name                 = module.network.cloud_cache_subnet_name
+  virtual_network_name = module.network.vnet_name
+  resource_group_name  = local.network_resource_group_name
+}
+
+// load the HPC Cache Template, with the necessary variables
+locals {
+    arm_template = templatefile("${path.module}/../hpc_cache.json",
+    {
+        uniquename   = local.cache_name,
+        location     = local.location,
+        hpccsku      = local.cache_throughput,
+        subnetid     = data.azurerm_subnet.vnet.id,
+        hpccachesize = local.cache_size
+    })
+}
+
+// HPC cache is currently deployed using azurerm_template_deployment as described in
+// https://www.terraform.io/docs/providers/azurerm/r/template_deployment.html. 
+// The only way to destroy a template deployment is to destroy the associated
+// RG, so keep each template unique to its RG. 
+resource "azurerm_template_deployment" "storage_cache" {
+  name                = "hpc_cache"
+  resource_group_name = azurerm_resource_group.hpc_cache_rg.name
+  deployment_mode     = "Incremental"
+  template_body       = local.arm_template
+}
+
+resource "azurerm_resource_group" "nfsfiler" {
+  name     = local.filer_resource_group_name
+  location = local.location
+}
+
+// the ephemeral filer
+module "nasfiler1" {
+    source = "../../../modules/nfs_filer"
+    resource_group_name = azurerm_resource_group.nfsfiler.name
+    location = azurerm_resource_group.nfsfiler.location
+    admin_username = local.vm_admin_username
+    admin_password = local.vm_admin_password
+    ssh_key_data = local.vm_ssh_key_data
+    vm_size = "Standard_D2s_v3"
+    unique_name = "nasfiler1"
+
+    // network details
+    virtual_network_resource_group = local.network_resource_group_name
+    virtual_network_name = module.network.vnet_name
+    virtual_network_subnet_name = module.network.cloud_filers_subnet_name
+}
+
+// load the Storage Target Template, with the necessary variables
+locals {
+    storage_target_1_template = templatefile("${path.module}/../storage_target.json",
+    {
+        uniquename              = local.cache_name,
+        uniquestoragetargetname = "storage_target_1"
+        location                = local.location,
+        nfsaddress              = module.nasfiler1.primary_ip,
+        usagemodel              = local.usage_model,
+        namespacepath_j1        = "/nfs1data",
+        nfsexport_j1            = module.nasfiler1.core_filer_export
+        targetPath_j1           = ""
+    })
+}
+
+resource "azurerm_template_deployment" "storage_target1" {
+  name                = "storage_target_1"
+  resource_group_name = azurerm_resource_group.hpc_cache_rg.name
+  deployment_mode     = "Incremental"
+  template_body       = local.storage_target_1_template
+
+  depends_on = [
+    azurerm_template_deployment.storage_cache, // add after cache created
+    module.nasfiler1
+  ]
+}
+
+// the ephemeral filer
+module "nasfiler2" {
+    source = "../../../modules/nfs_filer"
+    resource_group_name = azurerm_resource_group.nfsfiler.name
+    location = azurerm_resource_group.nfsfiler.location
+    admin_username = local.vm_admin_username
+    admin_password = local.vm_admin_password
+    ssh_key_data = local.vm_ssh_key_data
+    vm_size = "Standard_D2s_v3"
+    unique_name = "nasfiler2"
+
+    // network details
+    virtual_network_resource_group = local.network_resource_group_name
+    virtual_network_name = module.network.vnet_name
+    virtual_network_subnet_name = module.network.cloud_filers_subnet_name
+}
+
+// load the Storage Target Template, with the necessary variables
+locals {
+    storage_target_2_template = templatefile("${path.module}/../storage_target.json",
+    {
+        uniquename              = local.cache_name,
+        uniquestoragetargetname = "storage_target_2"
+        location                = local.location,
+        nfsaddress              = module.nasfiler2.primary_ip,
+        usagemodel              = local.usage_model,
+        namespacepath_j1        = "/nfs2data",
+        nfsexport_j1            = module.nasfiler2.core_filer_export
+        targetPath_j1           = ""
+    })
+}
+
+resource "azurerm_template_deployment" "storage_target2" {
+  name                = "storage_target_2"
+  resource_group_name = azurerm_resource_group.hpc_cache_rg.name
+  deployment_mode     = "Incremental"
+  template_body       = local.storage_target_2_template
+
+  depends_on = [
+    azurerm_template_deployment.storage_target1, // add after storage target1
+    module.nasfiler2
+  ]
+}
+
+// the ephemeral filer
+module "nasfiler3" {
+    source = "../../../modules/nfs_filer"
+    resource_group_name = azurerm_resource_group.nfsfiler.name
+    location = azurerm_resource_group.nfsfiler.location
+    admin_username = local.vm_admin_username
+    admin_password = local.vm_admin_password
+    ssh_key_data = local.vm_ssh_key_data
+    vm_size = "Standard_D2s_v3"
+    unique_name = "nasfiler3"
+
+    // network details
+    virtual_network_resource_group = local.network_resource_group_name
+    virtual_network_name = module.network.vnet_name
+    virtual_network_subnet_name = module.network.cloud_filers_subnet_name
+}
+
+// load the Storage Target Template, with the necessary variables
+locals {
+    storage_target_3_template = templatefile("${path.module}/../storage_target.json",
+    {
+        uniquename              = local.cache_name,
+        uniquestoragetargetname = "storage_target_3"
+        location                = local.location,
+        nfsaddress              = module.nasfiler3.primary_ip,
+        usagemodel              = local.usage_model,
+        namespacepath_j1        = "/nfs3data",
+        nfsexport_j1            = module.nasfiler3.core_filer_export
+        targetPath_j1           = ""
+    })
+}
+
+resource "azurerm_template_deployment" "storage_target3" {
+  name                = "storage_target_3"
+  resource_group_name = azurerm_resource_group.hpc_cache_rg.name
+  deployment_mode     = "Incremental"
+  template_body       = local.storage_target_3_template
+
+  depends_on = [
+    azurerm_template_deployment.storage_target2, // add after storage target2
+    module.nasfiler3
+  ]
+}
+
+output "mount_addresses" {
+  value = azurerm_template_deployment.storage_cache.outputs["mountAddresses"]
+}

src/terraform/examples/HPC Cache/README.md

@@ -1 +1,7 @@
-Please refer to the Artist Anywhere tutorials for how to use the HPC Cache filer: https://github.com/Azure/Avere/blob/master/src/tutorials/ArtistAnywhere/StorageCache/04-Cache.tf
+# HPC Cache
+
+The examples in this folder build various configurations of the Avere vFXT with IaaS based filers:
+
+1. [no-filer example](examples/HPC%20Cache/no-filers)
+2. [HPC Cache mounting 1 IaaS NAS filer example](examples/HPC%20Cache/1-filer)
+3. [HPC Cache mounting 3 IaaS NAS filers example](examples/HPC%20Cache/3-filers)

src/terraform/examples/HPC Cache/hpc_cache.json

@@ -0,0 +1,25 @@
+{
+    "$schema": "https://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#",
+    "contentVersion": "1.0.0.0",
+    "resources": [
+      {
+        "name": "${uniquename}",
+        "type": "Microsoft.StorageCache/caches",
+        "apiVersion": "2019-11-01",
+        "location": "${location}",
+        "sku": {
+          "name": "${hpccsku}"
+        },
+        "properties": {
+          "subnet": "${subnetid}",
+          "cacheSizeGB": "${hpccachesize}"
+        }
+      }
+    ],
+    "outputs": {
+      "mountAddresses": {
+        "type": "string",
+        "value": "[string(reference(resourceId('Microsoft.StorageCache/caches', '${uniquename}'), '2019-11-01').mountAddresses)]"
+      }
+    }
+}

src/terraform/examples/HPC Cache/no-filers/README.md

@@ -0,0 +1,42 @@
+# HPC Cache Deployment with no Filers
+
+This example shows how to deploy an HPC Cache by itself.
+
+This example currently uses `azurerm_template_deployment` to deploy a template, but will be replaced soon by a native azurerm module.
+
+This examples configures a render network, controller, and HPC Cache without any filers as shown in the diagram below:
+
+![The architecture](../../../../../docs/images/terraform/nofiler.png)
+
+## Deployment Instructions
+
+To run the example, execute the following instructions.  This assumes use of Azure Cloud Shell.  If you are installing into your own environment, you will need to follow the [instructions to setup terraform for the Azure environment](https://docs.microsoft.com/en-us/azure/terraform/terraform-install-configure).
+
+1. browse to https://shell.azure.com
+
+2. Specify your subscription by running this command with your subscription ID:  ```az account set --subscription YOUR_SUBSCRIPTION_ID```.  You will need to run this everytime after restarting your shell, otherwise it may default you to the wrong subscription, and you will see an error similar to `azurerm_public_ip.vm is empty tuple`.
+
+3. double check your [HPC Cache pre-requistes](https://docs.microsoft.com/en-us/azure/hpc-cache/hpc-cache-prereqs)
+
+4. get the terraform examples
+```bash
+mkdir tf
+cd tf
+git init
+git remote add origin -f https://github.com/Azure/Avere.git
+git config core.sparsecheckout true
+echo "src/terraform/*" >> .git/info/sparse-checkout
+git pull origin master
+```
+
+6. `cd src/terraform/examples/HPC\ Cache/1-filer`
+
+7. edit the local variables section at the top of the file `main.tf`, to customize to your preferences
+
+8. execute `terraform init` in the directory of `main.tf`.
+
+9. execute `terraform apply -auto-approve` to build the HPC Cache cluster
+
+Once installed you will be able to mount the HPC Cache cluster login according to the [documentation](https://docs.microsoft.com/en-us/azure/hpc-cache/hpc-cache-mount).
+
+When you are done using the cluster, you can destroy it by running `terraform destroy -auto-approve` or just delete the three resource groups created.

src/terraform/examples/HPC Cache/no-filers/main.tf

@@ -0,0 +1,83 @@
+// customize the HPC Cache by adjusting the following local variables
+locals {
+    // the region of the deployment
+    location = "eastus"
+    
+    // network details
+    network_resource_group_name = "network_resource_group"
+    
+    // vfxt details
+    hpc_cache_resource_group_name = "hpc_cache_resource_group"
+
+    // HPC Cache Throughput SKU - 3 allowed values for throughput (GB/s) of the cache
+    //    Standard_2G
+    //    Standard_4G
+    //    Standard_8G
+    cache_throughput = "Standard_2G"
+
+    // HPC Cache Size - 5 allowed sizes (GBs) for the cache
+    //     3072
+    //     6144
+    //    12288
+    //    24576
+    //    49152
+    cache_size = 12288
+
+    // unique name for cache
+    cache_name = "uniquename"
+}
+
+provider "azurerm" {
+    version = "~>2.0.0"
+    features {}
+}
+
+// the render network
+module "network" {
+    source              = "../../../modules/render_network"
+    resource_group_name = local.network_resource_group_name
+    location            = local.location
+}
+
+resource "azurerm_resource_group" "hpc_cache_rg" {
+  name     = local.hpc_cache_resource_group_name
+  location = local.location
+  // the depends on is necessary for destroy.  Due to the
+  // limitation of the template deployment, the only
+  // way to destroy template resources is to destroy
+  // the resource group
+  depends_on = [module.network]
+}
+
+data "azurerm_subnet" "vnet" {
+  name                 = module.network.cloud_cache_subnet_name
+  virtual_network_name = module.network.vnet_name
+  resource_group_name  = local.network_resource_group_name
+}
+
+// load the HPC Cache Template, with the necessary variables
+locals {
+    arm_template = templatefile("${path.module}/../hpc_cache.json",
+    {
+        uniquename   = local.cache_name,
+        location     = local.location,
+        hpccsku      = local.cache_throughput,
+        subnetid     = data.azurerm_subnet.vnet.id,
+        hpccachesize = local.cache_size
+    })
+}
+
+// HPC cache is currently deployed using azurerm_template_deployment as described in
+// https://www.terraform.io/docs/providers/azurerm/r/template_deployment.html. 
+// The only way to destroy a template deployment is to destroy the associated
+// RG, so keep each template unique to its RG. 
+resource "azurerm_template_deployment" "storage_cache" {
+  name                = "hpc_cache"
+  resource_group_name = azurerm_resource_group.hpc_cache_rg.name
+  deployment_mode     = "Incremental"
+  template_body       = local.arm_template
+}
+
+output "mount_addresses" {
+  value = azurerm_template_deployment.storage_cache.outputs["mountAddresses"]
+}

src/terraform/examples/HPC Cache/storage_target.json

@@ -0,0 +1,26 @@
+{
+    "$schema": "https://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#",
+    "contentVersion": "1.0.0.0",
+    "resources": [
+      {
+        "name": "${uniquename}/${uniquestoragetargetname}",
+        "type": "Microsoft.StorageCache/caches/storageTargets",
+        "apiVersion": "2019-11-01",
+        "location": "${location}",
+        "properties": {
+          "targetType": "nfs3",
+          "nfs3": {
+            "target": "${nfsaddress}",
+            "usageModel": "${usagemodel}"
+          },
+          "junctions": [
+            {
+              "namespacePath": "${namespacepath_j1}",
+              "nfsExport": "${nfsexport_j1}",
+              "targetPath": "${targetpath_j1}"
+            }
+          ]
+        }
+      }
+    ]
+}

src/terraform/examples/vfxt/README.md

@@ -3,6 +3,6 @@
 The examples in this folder build various configurations of the Avere vFXT with IaaS based filers:
 
 1. [Avere vFXT for Azure](no-filers/)
-2. [Avere vFXT for Azure and wire up against 1 IaaS NAS filer](1-filer/)
+2. [Avere vFXT for Azure mounting 1 IaaS NAS filer](1-filer/)
-3. [Avere vFXT for Azure and wire up against 3 IaaS NAS filers](3-filers/)
+3. [Avere vFXT for Azure mounting 3 IaaS NAS filers](3-filers/)
 4. [Avere vFXT optimized for Houdini](HoudiniOptimized/)

src/terraform/modules/controller/README.md

@@ -3,5 +3,5 @@
 This module deploys a controller for the Avere vFXT for Azure.  Examples of module usage can be found in any of the following examples:
 
 1. [Install Avere vFXT for Azure](../../examples/vfxt/no-filers)
-2. [Install Avere vFXT for Azure and wire up against 1 IaaS NAS filer](../../examples/vfxt/1-filer)
+2. [Install Avere vFXT for Azure mounting 1 IaaS NAS filer](../../examples/vfxt/1-filer)
-3. [Install Avere vFXT for Azure and wire up against 3 IaaS NAS filers](../../examples/vfxt/3-filers)
+3. [Install Avere vFXT for Azure mounting 3 IaaS NAS filers](../../examples/vfxt/3-filers)

src/terraform/modules/jumpbox/install.sh

@@ -38,13 +38,16 @@ function install_golang() {
     mkdir -p $AZURE_HOME_DIR/gopath
     echo "export GOPATH=$AZURE_HOME_DIR/gopath" >> $AZURE_HOME_DIR/.bashrc
     echo "export PATH=$PATH:/usr/local/go/bin:$GOPATH/bin" >> $AZURE_HOME_DIR/.bashrc
-    source $AZURE_HOME_DIR/.bashrc
     rm $GO_DL_FILE
 }
 
 function pull_avere_github() {
     # best effort to build the github content
     set +e
+    # setup the environment
+    source $AZURE_HOME_DIR/.bashrc
+    OLD_HOME=$HOME
+    export HOME=$AZURE_HOME_DIR
     # checkout Checkpoint simulator code, all dependencies and build the binaries
     cd $GOPATH
     go get -v github.com/Azure/Avere/src/terraform/providers/terraform-provider-avere
@@ -52,8 +55,10 @@ function pull_avere_github() {
     go build
     mkdir -p $AZURE_HOME_DIR/.terraform.d/plugins
     cp terraform-provider-avere $AZURE_HOME_DIR/.terraform.d/plugins
+    export HOME=$OLD_HOME
     # re-enable exit on error
     set -e
+
 }
 
 function install_az_cli() {

src/terraform/providers/terraform-provider-avere/README.md

@@ -13,8 +13,8 @@ The provider has the following features:
 
 This provider requires a controller to be installed that is used to create and manage the Avere vFXT.  The following examples provide details on how to use terraform to deploy the controller:
 1. [Install Avere vFXT for Azure](../../examples/vfxt/no-filers)
-2. [Install Avere vFXT for Azure and wire up against 1 IaaS NAS filer](../../examples/vfxt/1-filer)
+2. [Install Avere vFXT for Azure mounting 1 IaaS NAS filer](../../examples/vfxt/1-filer)
-3. [Install Avere vFXT for Azure and wire up against 3 IaaS NAS filers](../../examples/vfxt/3-filers)
+3. [Install Avere vFXT for Azure mounting 3 IaaS NAS filers](../../examples/vfxt/3-filers)
 
 ## Build the Terraform Provider binary