* ci: changes up to endpointInternal
* ci: remove defaultInterface from invoker
* ci: change up to CreateEndpoint
* ci: changes up to CreateEndpoint()
* ci: invoker cns and UT fixes
* ci: add fixes to UT(s), capture non populated defaultInterface failures
* ci: multitenancy changes
* ci: invoker azure changes & remove all defaultInterfaceInfo possible
* ci add NICType to baremetal flow
* chore: address comments
* merge nw info fields to ep info and draft new createEndpoint function
* restruct ipamAddResult struct
* reorder code to create epinfo first, and then create network and ep based on epinfo
* add getNwInfo and generate ipamAddResult
* fix network windows.go
* create nw info first and create nw and ep dns info
* fix testIpamAddFail ut referencing wrong redeclared err variable, fix error message
* UT fix part one
* fix the getNetworkID and getNetworkInfo
* move create endpoint to network package, remove ifIndex as needed
* use function to get network id
* unify creation of nw and endpoint info by removing switch
* change functions to consume ep info instead of nw info
* remove unused variable accidentally added earlier
* update old azure ipam invoker to use ep info and change ids to network ids when appropriate
previously we renamed the NetworkInfo symbol to EndpointInfo in lots of places, but the Id in Network Info is NOT the same as Endpoint Info, so while the code compiles, code that previously used the id field of the network info struct would now be using the id field of the endpoint info struct. It should use the NetworkId field of the endpoint info struct instead.
* rename endpoint info id field to EndpointID to remove ambiguity
* change nw info to ep info in windows
* adjust comments
* move all methods in create ep info dependent on nw info to use ep info instead (windows and linux)
addSubnetToNetworkInfo, setNetworkOptions, and getEndpointPolicies. getEndpointPolicies will now take just the subnets needed as a parameter rather than the whole nw or ep info.
* make cnm compile (not necessarily correct)
* make all tests compile except endpoint test secondary client (windows and linux) (not necessarily correct)
* comment out endpoint test secondary endpoint client case to make tests compile
* address todos and comments from meeting
* remove duplicated code for populating address in ep info generation
* update EndpointCreate to support multiple infra nic
* save all endpoints to state, regardless of type, use either stateless or cni statefile
undos some changes in "move create endpoint to network package, remove ifIndex as needed"
deletion flow needs to figure out how to tell if the nic type is delegated
1 interface info : 1 endpoint info : 1 endpoint struct mapping
* fix dual nic support conditional and finding master interface ip
the master interface ip must be in a particular form where the last few bits are zeroed out based on the mask or we won't find the ip
for example, while the host subnet perfix is 10.224.0.113/16, the ip that should be passed into find master interface (subnet) should be 10.224.0.0/16 which matches one of the interfaces' ipnet (10.224.0.0/16)
* fix empty network name
when we need to create a network, we collect the network information, but if we do not find the network, we return an empty nw info and an error
when we create the endpoint we need to use endpoint info's network id, not the (possibly) empty network info struct's network id
* make network_test.go compile (linux and windows compile)
unit tests are not necessarily correct at this point
* add NICType to endpoint struct and populate it
important: when getting the endpoint state, the NIC Type field is not populated, leading to deletes not having a NIC Type; this should be changed so that getting the state populates that field
including the nic type allows us to simplify the secondary endpoints delete flow (just check if the nic type is delegated instead of checking if the secondary interfaces map is populated)
smoke tested:
linux aks podsubnet (same vm, multi vm, internet, cni statefile consistent)
linux standalone transparent vlan multitenancy (same vm, multi vm, internet, multi vnet, no connection between coke pepsi, cni statefile consistent)
windows standalone bridge multitenancy single customer (same vm connections, internet, dns only, cni statefile consistent, 2 pods deleting and recreating)
* ci: InterfaceInfo Map
* fix multitenancy_test ut by changing key
* add endpoint id to secondary ep info test since we populate the id in the actual flow
* fix cni network_test linux and ensure secondary create ep info does not break
in network_test we pass in sample delegated (secondary) data to Add which we then create endpoint info from
even with most fields empty, in linux, the ep info is created without erroring
* make invoker_cns_test linux pass
running all linux package tests for network and cni package pass (or also fail on master, like createBridge)
windows unit tests mostly all fail for the same ones on master and this branch
summary:
- network_windows_test.go
○ TestFailToAddIPv6DefaultRoute already fails on master
- network_test.go
○ 9 tests fail on master, 9 tests fail on my branch
- manager_test.go
○ 9 tests fail on master, 9 tests fail on my branch
- endpoint_windows_test.go
○ TestNewAndDeleteEndpointImplHnsV2 already timeouts on master
- endpoint_test.go
○ 9 tests fail on master, 9 tests fail on my branch
- network_windows_test.go
○ FAIL: TestPluginSecondAddSamePodWindows/CNI_consecutive_add_already_hot_attached
○ FAIL: TestPluginSecondAddSamePodWindows/CNI_consecutive_add_not_hot_attached
○ We don't handle consecutive add anymore
- network_test.go
○ TestPluginMultitenancyAdd/Add_Happy_path fails on master and my branch (received multiple NC results [] from CNS while dualnic feature is not supported)-- we still get two items on our list/map though which is expected
- invoker_cns_test passes
- invoker_azure_test passes
- multitenancy_test passes
The consecutive add tests fail but that is expected since we no longer support it.
* modify delete flow to handle multiple epinfos to delete
delete ALL endpoints related to the endpoint infos list in the event cni fails half-way through an add (one failed endpoint create and we delete all would-be-create endpoints and the state)
replace looping over deletion code "n" number of times with getting a slice of endpoint infos to delete
modify stateless cni code to retrieve a slice of network endpoint infos from a single response based on the container id (container id can be used in stateless cni for retrieval)
incorporate stateless cni changes from other branch (cns client/ipam/restserver changes)
modify get endpoint state to return slice of endpoint infos, and getting an endpoint will return an endpoint from that slice with nic type infra
move edge case where endpoint is not created in the state but ips are already allocated to immediately after retrieving all ep infos
fix mock behavior for getting all endpoints by container id
move getting network id and network info out of the loop because their values do not seem to change between iterations
move deletion of endpoint logic into a dedicated loop, and then create a dedicate loop for calling ipam delete to prevent inconsistent state
all expected unit tests on linux pass
* address feedback
* Make change to UpdateEndpointState API to support SwiftV2 for Stateless CNI
* change save state to only call update endpoint state once with a slice of endpoints, uts pass
* fix using nonexistent key by passing in current interface info directly
* fix azure ipam invoker not getting a populated network info for legacy cni
* add L1VH windows support
* add nic type to windows endpoints
* move adding an external interface code to run only when creating a new network
this change reflects prior behavior, where we would only add an external interface to the statefile if the network (after searching through all external interfaces) was not found
currently, if there are multiple interfaces that could be selected as the master, we would add each external interface to the statefile, even if the *network* is associated with one of the existing interfaces
while we would still always find the same network (thanks to having a constant NetworkId, regardless of the external interface), you could get an extra empty external interface in your statefile
this commit should remove that possibility (the extra external interface shouldn't really matter in the first place though because we always select the external interface that has a matching network created on it)
this should be os agnostic
* update comments, first todo check pass
* address some linter issues
* rename networkId to networkID in endpoint info
ran package tests in windows and linux for cni and network packages
ran package tests in linux for cns restserver
all have expected outputs (either pass, or also fails on master branch)
* address linter issues
* preserve more logs and reduce timeout for restart for debugging
* clean comments and rename for clarity
if we use the endpoint info for the network info fields, we name it nwInfo as a hint
* address more linter issues
linux network, restserver, and cni package tests pass
* Revert "preserve more logs and reduce timeout for restart for debugging"
This reverts commit 0f004925cf.
* ignore error on delete flow network query
if we are in stateful cni and do not find the network, we will not error, but when we search for the endpoint it will not be found, leading to us calling ipam invoker delete which is assumed idempotent before returning
previously we would error in stateful cni and return before calling ipam invoker delete
* delete network on endpoint delete if stateless and delegated vmnic (win + linux)
* add nic name, set nicname in linux to master interface name
stateless will key into interface map with the nicname field
in windows, the nicname field is based on the args ifname (usually eth0)
in linux, the nicname field is based on the master interface found (usually eth0)
note:
hostifname/hostvethname = linux veth pair peer in the host ns
ifname/contifname = linux veth pair peer in the container ns, in windows it's just the args ifname
nicname is something else
ifname isn't used during deletion in linux, hns id is used for deletion in windows
* return secondary interface as cni result if no infra nic found, include mac address in cni result
* address linter issue
* fix critical error where failing to add in windows stateless would lead to hns components not being deleted and add netns for hnsv2
tested by triggering a failure to save the stateless state and seeing that the hns endpoint and network are cleaned up
we use the endpoint info to clean up on "add" error, but previously, we didn't populate it with the hns ids to do so
adds netns to stateless as the presence of a valid guid in netns determines if hnsv2 is used
* set nicname used in stateless cni according to feedback
* add dummy guid to stateless delete since we assume stateless is always hnsv2
we assume that the netns value isn't used in stateless deletion
* clean up createEpInfo, declare endpoint info once
* address feedback from vipul
* change comments only
* revert change to cns package
* fix stateless cni migration flow not having nictype on migrate
* keep nwInfo variables named the same as before pr (noop)
* separate endpoint and network policies in endpoint info
behavior should not change except in hnsv1, where network policies passed into network create call will NOT include endpoint policies
endpoint policies always include network policies
* address feedback from reviewers
* address feedback and account for case where cns provides info without nic type
if nic type is empty from cns in invoker cns, we assume it is infra nic type and populate it with infra nic type
* address feedback to declare endpoint info once and populate all fields at once
moved add subnets to after endpoint info created
moved retrieval of all endpoint policies (from getEndpointPolicies and getPoliciesFromRuntimeCfg)until after endpoint info created
network policies are just passed in from the args unaltered
* use ifname instead of nicname field in endpoint struct as key in stateless
* convert macaddress only nictype is delegatedvmnic
* address feedback by removing network dns settings
* address linter issues (noop)
* address feedback and linter (noop)
* remove unused consecutive add funcs (noop)
* fix release ips when create a container without nictype using older cni and then upgrade cni and delete
if we create a pod with an older cni version, it won't have a nictype
if we upgrade cni and then delete, we should treat an empty nictype as an infra nictype and
call the invoker delete
* prevent eps with delegated nic type present on ep from also calling transparent endpoint client on delete
tested on swift v2 linux single pod add, change cni to this version, delete (ok)
then add using this cni version and delete, no extraneous transparent endpoint client calls logged
* mock get interface method for ut
searched for "NetPlugin" in all files and determined all prod use of NetPlugin goes through NewNetPlugin where we set the get interface method to the real interface get method
adds ut where the master interface (by mac) is not found
* address feedback (noop)
* add ut for handling empty nictype on cns add (noop)
* add multitenancy delete net not found ut (noop)
* add uts for multi interface infos single add call, verify endpoint id, cns to cni data conversion and vice versa, get endpoint info from container id (noop)
verifies partial success will delete all endpoints, even successfully created ones in the same cni add call
* add ut for all pods associated with container id delete in one del call, new secondary delete flow (noop)
* add two UTs
* fix a linter issue
* add ut to check endpoint ifname on new endpoint creation based on nictype (noop)
* add ut for fail to find interface by subnet (noop)
* Adding support for Stateless CNI Delete Edge case when there in no HNS ID
* fix uts
* fix linter issues
* fix ut
---------
Co-authored-by: jpayne3506 <payne.3506@gmail.com>
Co-authored-by: paulyufan2 <paulyu01@outlook.com>
Co-authored-by: AzureAhai <behzadm@microsoft.com>
* Add ETW support in zap logger for CNI
Added a zap WriteSyncer to enable direct ETW logging through zap core, maintaining existing logging structure while to ETW from CNI.
* Transform 'zapetw' package into a standalone module for external use
* Revert "Transform 'zapetw' package into a standalone module for external use"
This reverts commit 63050ed68d353e43ae1b1fedd11b8e99259b7a28.
* Relocate EtwWriteSyncer.go to zapetw module for improved organization
- Renamed and moved cni/log/ETWZapCore/EtwWriteSyncer.go to zapetw/write_syncer.go.
* Applied gofumpt formatting to adhere to style guidelines.
* 1. Implemented platform-specific ETW logging enhancements.
2. Refactor ETW initialization into dedicated method and zapetw package.
* Changed InitETWLogger method signature for Linux.
* Wrapped error messages at each level of the call hierarchy.
* Removed punctuation marks from error messages.
* Wrapped error messages with errors.wrap method.
* Added comments for clarity.
* implemented zap.core for ETW.
* Fixed lint issues.
* Catch errors from etw.writeEvent method.
* Renamed provider.
* Abstracted etw core creation in logger_windows.
Removed unsupported error from logger_linux to keep the behaviour uniform.
* renamed unused parameter.
* Renamed variable to lower camel case as it is private. Removed additional local reference.
* fixed variable name.
* Added comment.
* Renamed ETW provider, removed application names from the provider name.
---------
Co-authored-by: Sivakami Subramaniam <t-sivakamis@microsoft.com>
* Move network utils functions with iptables to new file
* Add receiver to iptables and create interface
* Resolve conflicts from rebasing
* Add changes for building on windows
* Address linter issues
* Address windows linter issues
* Invert if condition for linter nesting
* Scope iptables interfaces to package
* Rename iptables client to avoid stuttering
* Move EnableIPForwarding to snat linux
* Rename ipTablesClientInterface to ipTablesClient
* Address linter issues from moving enable ip forwarding function
* Rename after rebase
* feat: 🌈 StatelessCNI: Adding getEndpoint and UpdateEndpoint API to CNS (#2102)
* Adding getEndpoint and UpdateEndpoint API to CNS with the respective clients in support of stateless CNI.
* Updating the unit tests and address the comments.
* Addressing the comments.
* Addressing the coments regarding CNS support for Stateless CNI
* Adddressing the PR comments
* 🌈 feat: adding flags for stateless cni (#2103)
feat: stateless cni
* 🌈 feat: StatelessCNI: Applying stateless CNI mode changes in network package. (#2197)
* Apllying stateless CNI mode in network package.
* Addresing the commetns.
* feat: create stateless cni binary for swift (#2275)
* enabling CNS telemetry
* Master rebase changes
* CNI Telemetry enabled on CNS
* Stateless CNI changes.
* making change to CNSendpointStorePath
* Updating makefile to avoid creating statless CNI release.
---------
Co-authored-by: Vipul Singh <vipul21sept@gmail.com>
* fix overlay IPAM not reporting version
* revert file and var naming, add correct path to makefile
* proposal design for multitenant IPAM flow
* change podipinfo + linter issue
* pointer issues for printf
* update IPAM branching
* remove comments
* pod client placeholder
* address lint issue for httpservicefake
* getting pod info in validator
* linter issue
* update network container contract
* renaming
* mtpnc changes
* rebase
* revert file and var naming, add correct path to makefile
* add default route
* add unit tests
* update unit tests for ipam
* go get to fix linter
* go mod tidy
* update routes
* update routes
* remove stale comments + remove redundant method
* add contexts + change address type
* addressed review
* embedded client to mock + enum for address type
* fix error
* change addressType to NICType
* change isDefaultRoute to SkipDefaultRoutes
* address comments
* refractor: make changes according to cni/cns contract
* refractor: make adding route its own func + move swift v2 ipam branching to after normal ipam flow
* refractor: change vars naming
* refractor: more var naming
* test: add test for podv6cidr
* refractor: make the returning podIpInfo init cleaner in swiftv2.go
* refractor + tests: add contexts to ipconfigs req validators + set route tests
* refractor: change labels for swift v2 pods
* fix: fix swift v2 UT
* refractor: add v4/v6 distinction for service cidr
* rebase
* revert file and var naming, add correct path to makefile
* rebase
* revert file and var naming, add correct path to makefile
* change podipinfo + linter issue
* update IPAM branching
* pod client placeholder
* getting pod info in validator
* linter issue
* rebase
* revert file and var naming, add correct path to makefile
* refractor: fix conflicts
* refractor: revert podwatcher code changes
* docs: change comment
* refractor: change CIDR to CDIRs
* refractor: parse CIDRs as semicolons separated string from env in SetRoutes
* docs: add minor comment
* refractor: change separator for parsing CIDRs
* feat: add rbac roles
* fix: gofumpt
* fix: update clusterrole
* fix: add namespace to clusterrolebinding
* fix: UT
* fix: add labels toswift v2 clusterrole
* fix: release default ipconfig early if getting swiftv2 ipconfig failed
* test: add more UT
* fix: parsing MTPNC as CIDR instead
* fix: toggle skipDefaultRoutes for infraNic to true
* fix: add route for node cidr in ipv4 podipconfig
* feat: add node cidrs route
* fix: linter
* address comments
* fix: minor logs formatting
* feat: move cns yaml for swiftv2 scenario to a diff file + more logging for swiftv2middleware
* fix: log debugf to printf
* fix: add testmain to avoid nil pointer error for loggers
* Update azure-cns.yaml
Signed-off-by: Quang Nguyen <nguyenquang@microsoft.com>
* fix: move parseCIDRs to a common package, use net/netip instead of net
* fix: exhaustive all switch case for nic type
* fix: exhaustive all switch case for nic type
* refractor: change fmt.Errorf to errors.Wrapf
* fix: add mtpnc status check in validator + use netip package
* fix: minor
* revert: azure-cns.yaml
---------
Signed-off-by: Quang Nguyen <nddangquang@gmail.com>
Signed-off-by: Quang Nguyen <nguyenquang@microsoft.com>
* initial changes for cni/cns delete deadlock
* add logs and set watcher path
* working fswatcher, removing extra debug lines
* watcher changes for azure-ipam
* remove additional logger from fsnotify and address comments
* /deleteIDs directory as part of cnsconfig
* add feature flag for async delete
* adds some unit test + remove changes for azure-ipam(split pr, dependency conflicts)
* update ut
* update uts
* swift configmap update
* fix configmap for test
* addressing comments
* fix lint
* adding cause to connection error struct
* connectionerr lint
* addressing comments, change watchfs to watcher method
* add ctx to releaseIP func
* log containerID in failure to add watcher, exit select if context is cancelled
* fix logs in network.go after rebase
* catch release ip error in invoker_cns.go
* retry on failure to release ip
* lint fix
* rework asyncdelete watcher
Signed-off-by: Evan Baker <rbtr@users.noreply.github.com>
* include podinterfaceID in file for releaseIP
* close file before delete
---------
Signed-off-by: Evan Baker <rbtr@users.noreply.github.com>
Co-authored-by: Evan Baker <rbtr@users.noreply.github.com>
* feat: added logger package and replaced old log initialization for the new one
* feat: changed all log lines to new zap logger
* fix: typo
* Update azure-ipam/logger/logger.go
Co-authored-by: Timothy J. Raymond <timraymond@users.noreply.github.com>
* fix: adding constants to describe logger rotations constraints
* Renamed logger New method
* Replaced logAndSend method by log 1st and send then so we can use zap fields
* minor fixes
* added logger init for tests
* replaced Any by Error
* gci ipam_test
* fixed govet errors
* moved component to a zap field
* fixed linit issues
* added log mock
* fix: gci
* fix: added context for logger teardown
* Update cni/log/logger.go
Co-authored-by: Evan Baker <rbtr@users.noreply.github.com>
* moved logger init mock function
* fix: lint findings
---------
Co-authored-by: Esteban Capillo <estebancams@microsoft.com>
Co-authored-by: Timothy J. Raymond <timraymond@users.noreply.github.com>
Co-authored-by: Evan Baker <rbtr@users.noreply.github.com>
* set constant mac for host veth interface
* fixed a race issue in transparent-vlan where delete can happen after add and removes route add by ADD call
* moved log to place where its executed
* enable proxy arp on bridge to allow public connectivity from apipa interface
* validate newly created namespace is not same as host namespace
* addressed comments and added UTs
* fixed cni delete call for linux multitenancy
* lint fixes
* windows lint fixes
* lint fixes
* fix issues with network namespace creation and vlan interface creation
* Removed deletehostveth flag and delete host veth on delete endpoint trigger
* lint fix
* address comment
Evan Baker
bohuini
QxBytes
Behzad Mirkhanzadeh
sivakami-projects
Paul Johnston
Jaeryn
ZetaoZhuang
Paul Yu
Quang Nguyen
jshr-w
Camryn Lee
Vipul Singh
Matthew Long
tamilmani1989
ronak-31
estebancams
John Payne