azure-data-lake-store-python/HISTORY.rst

.. :changelog:

Release History
===============

0.0.21 (2018-06-01)
+++++++++++++++++++
* Remove unused msrest dependency

0.0.20 (2018-05-29)
+++++++++++++++++++
* Compatibility of the sdist with wheel 0.31.0

0.0.19 (2018-03-14)
-------------------
* Fixed upload issue where destination filename was wrong while upload of directory with single file #208

0.0.18 (2018-02-05)
-------------------
* Fixed read issue where whole file was cached while doing positional reads #198
* Fixed readline as well for the same

0.0.17 (2017-09-21)
-------------------
* Fixed README.rst indentation error
* Changed management endpoint

0.0.16 (2017-09-11)
-------------------
* Fixed Multi chunk transfer hangs as merging chunks fails #187
* Added syncflag and leaseid in create, append calls. 
* Added filesessionid in create, append and open calls.

0.0.15 (2017-07-26)
-------------------
* Enable Data Lake Store progress controller callback #174
* Fix File state incorrectly marked as "errored" if contains chunks is "pending" state #182
* Fix Race condition due to `transfer` future `done_callback` #177

0.0.14 (2017-07-10)
-------------------
* Fix an issue where common prefixes in paths for upload and download were collapsed into only unique paths.

0.0.13 (2017-06-28)
-------------------
* Add support for automatic refreshing of service principal credentials

0.0.12 (2017-06-20)
-------------------
* Fix a regression with ls returning the top level folder if it has no contents. It now properly returns an empty array if a folder has no children.

0.0.11 (2017-06-02)
-------------------
* Update to name incomplete file downloads with a `.inprogress` suffix. This suffix is removed when the download completes successfully.

0.0.10 (2017-05-24)
-------------------
* Allow users to explicitly use or invalidate the internal, local cache of the filesystem that is built up from previous `ls` calls. It is now set to always call the service instead of the cache by default.
* Update to properly create the wheel package during build to ensure all pip packages are available.
* Update folder upload/download to properly throw early in the event that the destination files exist and overwrite was not specified. NOTE: target folder existence (or sub folder existence) does not automatically cause failure. Only leaf node existence will result in failure.
* Fix a bug that caused file not found errors when attempting to get information about the root folder.

0.0.9 (2017-05-09)
------------------
* Enforce basic SSL utilization to ensure performance due to `GitHub issue 625 <https://github.com/pyca/pyopenssl/issues/625>`

0.0.8 (2017-04-26)
------------------
* Fix server-side throttling retry support. This is not a guarantee that if the server is throttling the upload (or download) it will eventually succeed, but there is now a back-off retry in place to make it more likely.

0.0.7 (2017-04-19)
------------------
* Update the build process to more efficiently handle multi-part namespaces for pip.

0.0.6 (2017-03-15)
------------------
* Fix an issue with path caching that should drastically improve performance for download

0.0.5 (2017-03-01)
------------------
* Fix for downloader to ensure there is access to the source path before creating destination files
* Fix for credential objects to inherit from msrest.authentication for more universal authentication support
* Add support for the following:

  * set_expiry: allows for setting expiration on files
  * ACL management:
  
    * set_acl: allows for the full replacement of an ACL on a file or folder
    * set_acl_entries: allows for "patching" an existing ACL on a file or folder
    * get_acl_status: retrieves the ACL information for a file or folder
    * remove_acl_entries: removes the specified entries from an ACL on a file or folder
    * remove_acl: removes all non-default ACL entries from a file or folder
    * remove_default_acl: removes all default ACL entries from a folder
    
* Remove unsupported and unused "TRUNCATE" operation.
* Added API-Version support with a default of the latest api version (2016-11-01)

0.0.4 (2017-02-07)
------------------
* Fix for folder upload to properly delete folders with contents when overwrite specified.
* Fix to set verbose output to False/Off by default. This removes progress tracking output by default but drastically improves performance.

0.0.3 (2017-02-02)
------------------
* Fix to setup.py to include the HISTORY.rst file. No other changes

0.0.2 (2017-01-30)
------------------
* Addresses an issue with lib.auth() not properly defaulting to 2FA
* Fixes an issue with Overwrite for ADLUploader sometimes not being honored.
* Fixes an issue with empty files not properly being uploaded and resulting in a hang in progress tracking.
* Addition of a samples directory showcasing examples of how to use the client and upload and download logic.
* General cleanup of documentation and comments.
* This is still based on API version 2016-11-01

0.0.1 (2016-11-21)
------------------
* Initial preview release. Based on API version 2016-11-01.
* Includes initial ADLS filesystem functionality and extended upload and download support.
Merging back the changes from master into dev These were changes made to make the pypi package renderer happy. These should be persisted across both branches. 2017-02-02 01:21:27 +03:00			`.. :changelog:`

			`Release History`
			`===============`
update History and release version in init file 2017-09-11 21:00:42 +03:00
Version 0.0.21 2018-06-01 19:58:43 +03:00			`0.0.21 (2018-06-01)`
Remove msrest completely 2018-05-23 18:53:07 +03:00			`+++++++++++++++++++`
			`* Remove unused msrest dependency`
Version 0.0.21 2018-06-01 19:58:43 +03:00
			`0.0.20 (2018-05-29)`
			`+++++++++++++++++++`
Wheel ChangeLog 2018-05-26 02:34:16 +03:00			`* Compatibility of the sdist with wheel 0.31.0`
Remove msrest completely 2018-05-23 18:53:07 +03:00
fixed upload issue for directory with single file 2018-03-13 22:18:25 +03:00			`0.0.19 (2018-03-14)`
			`-------------------`
			`* Fixed upload issue where destination filename was wrong while upload of directory with single file #208`

updated History with version and description 2018-02-06 03:10:07 +03:00			`0.0.18 (2018-02-05)`
			`-------------------`
			`* Fixed read issue where whole file was cached while doing positional reads #198`
			`* Fixed readline as well for the same`

Update History.rst releasing version 0.0.17 2017-09-22 03:51:01 +03:00			`0.0.17 (2017-09-21)`
			`-------------------`
			`* Fixed README.rst indentation error`
Update History.rst update management endpoint in 0.0.17 release 2017-09-22 03:52:07 +03:00			`* Changed management endpoint`
Update History.rst releasing version 0.0.17 2017-09-22 03:51:01 +03:00
update History and release version in init file 2017-09-11 21:00:42 +03:00			`0.0.16 (2017-09-11)`
			`-------------------`
Fixed Multi chunk transfer hangs as merging chunks fails (#187) 2017-08-10 04:46:37 +03:00			`* Fixed Multi chunk transfer hangs as merging chunks fails #187`
update History and release version in init file 2017-09-11 21:00:42 +03:00			`* Added syncflag and leaseid in create, append calls.`
			`* Added filesessionid in create, append and open calls.`
Fixed Multi chunk transfer hangs as merging chunks fails (#187) 2017-08-10 04:46:37 +03:00
Publish package with progress controller callback Updating the package version to publish the progress controller callback. 2017-07-26 19:55:09 +03:00			`0.0.15 (2017-07-26)`
change typo that broke formatting in HISTORY.rst 2017-07-28 00:55:07 +03:00			`-------------------`
Enable Data Lake Store progress controller callback #174 2017-07-13 19:32:58 +03:00			`* Enable Data Lake Store progress controller callback #174`
File state incorrectly marked as "errored" if contains chunks is "pending" state #182 2017-07-27 01:58:16 +03:00			`* Fix File state incorrectly marked as "errored" if contains chunks is "pending" state #182`
Addendum #177: updated HISTORY.rst 2017-07-25 00:30:06 +03:00			* Fix Race condition due to `transfer` future `done_callback` #177
Enable Data Lake Store progress controller callback #174 2017-07-13 19:32:58 +03:00
Fix a bug with over collapsing paths This is issue: https://github.com/Azure/azure-data-lake-store-python/issues/169 2017-07-11 02:48:27 +03:00			`0.0.14 (2017-07-10)`
			`-------------------`
			`* Fix an issue where common prefixes in paths for upload and download were collapsed into only unique paths.`

Updates to support refresh of service principal. 2017-06-29 03:57:44 +03:00			`0.0.13 (2017-06-28)`
			`-------------------`
			`* Add support for automatic refreshing of service principal credentials`

version 0.0.12 * Fix regression in `ls()` that caused an incorrect value to be returned for folders with no children. 2017-06-21 01:14:27 +03:00			`0.0.12 (2017-06-20)`
			`-------------------`
			`* Fix a regression with ls returning the top level folder if it has no contents. It now properly returns an empty array if a folder has no children.`

version 0.0.11 of azure-datalake-store package * Address a request to indicate that files being downloaded are in progress when being downloaded. * All files will have a suffix `.inprogress` until they are fully downloaded, at which point the suffix will be removed. 2017-06-07 21:12:33 +03:00			`0.0.11 (2017-06-02)`
			`-------------------`
			* Update to name incomplete file downloads with a `.inprogress` suffix. This suffix is removed when the download completes successfully.

Merge from dev. 2017-05-31 05:17:21 +03:00			`0.0.10 (2017-05-24)`
missed one dash that broke the history formatting. 2017-05-31 05:49:17 +03:00			`-------------------`
Merge from dev. 2017-05-31 05:17:21 +03:00			* Allow users to explicitly use or invalidate the internal, local cache of the filesystem that is built up from previous `ls` calls. It is now set to always call the service instead of the cache by default.
			`* Update to properly create the wheel package during build to ensure all pip packages are available.`
			`* Update folder upload/download to properly throw early in the event that the destination files exist and overwrite was not specified. NOTE: target folder existence (or sub folder existence) does not automatically cause failure. Only leaf node existence will result in failure.`
			`* Fix a bug that caused file not found errors when attempting to get information about the root folder.`

Version 0.0.9 updates for ADLS This update addresses a performance issue and works around github issue: https://github.com/pyca/pyopenssl/issues/625 2017-05-11 21:24:36 +03:00			`0.0.9 (2017-05-09)`
			`------------------`
			* Enforce basic SSL utilization to ensure performance due to `GitHub issue 625 <https://github.com/pyca/pyopenssl/issues/625>`

Update Retry logic to handle throttling scenarios This change enables upload and download to more reliably complete successfully in the face of intermittent server-side throttling by enacting a back-off retry strategy. Note that this strategy is not guaranteed to work every time. For example, if the server is under extremely heavy load and continues to reject requests, the retry strategy will eventually "give up" and return an error back to the user. 2017-05-01 19:44:11 +03:00			`0.0.8 (2017-04-26)`
			`------------------`
			`* Fix server-side throttling retry support. This is not a guarantee that if the server is throttling the upload (or download) it will eventually succeed, but there is now a back-off retry in place to make it more likely.`

Rev the version to publish with the new packaging. 2017-04-20 02:18:51 +03:00			`0.0.7 (2017-04-19)`
			`------------------`
			`* Update the build process to more efficiently handle multi-part namespaces for pip.`

Update to version 0.0.6 This includes: Performance fixes for upload and download of large folders Authentication fixes for token rerfesh using lib.auth() 2017-03-23 00:07:59 +03:00			`0.0.6 (2017-03-15)`
			`------------------`
			`* Fix an issue with path caching that should drastically improve performance for download`

Creds and validation fixes Fix creds to use the generic msrest.authentication class. Fix ADLDownloader to do validation of the source path before creating local files. Update history Add new methods and tests Adds set_expiry and ACL management functions and tests. Also adds support for API versions and fixes up the tests to use the new credential logic. in tests, explicitly use our version of PermissionError Try to explicitly import PermissionError Not sure why 2.7 tests are failing due to an inability to find PermissionError. 2017-02-23 04:04:20 +03:00			`0.0.5 (2017-03-01)`
			`------------------`
			`* Fix for downloader to ensure there is access to the source path before creating destination files`
			`* Fix for credential objects to inherit from msrest.authentication for more universal authentication support`
			`* Add support for the following:`
Fix nested bullets in the history. 2017-03-04 02:06:03 +03:00
Creds and validation fixes Fix creds to use the generic msrest.authentication class. Fix ADLDownloader to do validation of the source path before creating local files. Update history Add new methods and tests Adds set_expiry and ACL management functions and tests. Also adds support for API versions and fixes up the tests to use the new credential logic. in tests, explicitly use our version of PermissionError Try to explicitly import PermissionError Not sure why 2.7 tests are failing due to an inability to find PermissionError. 2017-02-23 04:04:20 +03:00			`* set_expiry: allows for setting expiration on files`
			`* ACL management:`
Fix nested bullets in the history. 2017-03-04 02:06:03 +03:00
			`* set_acl: allows for the full replacement of an ACL on a file or folder`
			`* set_acl_entries: allows for "patching" an existing ACL on a file or folder`
			`* get_acl_status: retrieves the ACL information for a file or folder`
			`* remove_acl_entries: removes the specified entries from an ACL on a file or folder`
			`* remove_acl: removes all non-default ACL entries from a file or folder`
			`* remove_default_acl: removes all default ACL entries from a folder`

Creds and validation fixes Fix creds to use the generic msrest.authentication class. Fix ADLDownloader to do validation of the source path before creating local files. Update history Add new methods and tests Adds set_expiry and ACL management functions and tests. Also adds support for API versions and fixes up the tests to use the new credential logic. in tests, explicitly use our version of PermissionError Try to explicitly import PermissionError Not sure why 2.7 tests are failing due to an inability to find PermissionError. 2017-02-23 04:04:20 +03:00			`* Remove unsupported and unused "TRUNCATE" operation.`
			`* Added API-Version support with a default of the latest api version (2016-11-01)`

Merge from master. 2017-02-23 04:07:56 +03:00			`0.0.4 (2017-02-07)`
			`------------------`
			`* Fix for folder upload to properly delete folders with contents when overwrite specified.`
			`* Fix to set verbose output to False/Off by default. This removes progress tracking output by default but drastically improves performance.`
Merging back the changes from master into dev These were changes made to make the pypi package renderer happy. These should be persisted across both branches. 2017-02-02 01:21:27 +03:00
Merge from master. 2017-02-23 04:07:56 +03:00			`0.0.3 (2017-02-02)`
Merging back the changes from master into dev These were changes made to make the pypi package renderer happy. These should be persisted across both branches. 2017-02-02 01:21:27 +03:00			`------------------`
Merge from master. 2017-02-23 04:07:56 +03:00			`* Fix to setup.py to include the HISTORY.rst file. No other changes`
Merging back the changes from master into dev These were changes made to make the pypi package renderer happy. These should be persisted across both branches. 2017-02-02 01:21:27 +03:00
Merge from master. 2017-02-23 04:07:56 +03:00			`0.0.2 (2017-01-30)`
			`------------------`
Merging back the changes from master into dev These were changes made to make the pypi package renderer happy. These should be persisted across both branches. 2017-02-02 01:21:27 +03:00			`* Addresses an issue with lib.auth() not properly defaulting to 2FA`
			`* Fixes an issue with Overwrite for ADLUploader sometimes not being honored.`
			`* Fixes an issue with empty files not properly being uploaded and resulting in a hang in progress tracking.`
			`* Addition of a samples directory showcasing examples of how to use the client and upload and download logic.`
			`* General cleanup of documentation and comments.`
			`* This is still based on API version 2016-11-01`

			`0.0.1 (2016-11-21)`
			`------------------`
			`* Initial preview release. Based on API version 2016-11-01.`
Fixed Multi chunk transfer hangs as merging chunks fails (#187) 2017-08-10 04:46:37 +03:00			`* Includes initial ADLS filesystem functionality and extended upload and download support.`