azurehpc/tutorials/cfd_workflow

Build a simple PBS compute cluster with a Windows visualization node for OpenFOAM and ParaView

Visualisation: config.json

This example will create an HPC cluster with a CentOS 7.6 headnode running PBS Pro 19.1 exporting a 4TB NFS space and several CentOS 7.6 HC44 compute nodes; and a Windows visualization node. This tutorial uses NFS and RDP for simplicity but you can also easily set it up with an alternate storage or visualization solution using the examples here.

NOTE: MAKE SURE YOU HAVE FOLLOWED THE STEPS IN prerequisite before proceeding here

First initialise a new project. AZHPC provides the azhpc-init command that will help here. Running with the -s parameter will show all the variables that need to be set, e.g.

$ azhpc-init -c $azhpc_dir/tutorials/cfd_workflow -d cfd_workflow

The variables can be set with the -v option where variables are comma separated. The -d option is required and will create a new directory name for you.

azhpc-init -c $azhpc_dir/tutorials/cfd_workflow -d cfd_workflow \
    -v location=southcentralus,resource_group=<RESOURCE-GROUP>,win_password=<WIN-PASSWORD>

Note: Replace <RESOURCE-GROUP> and <WIN-PASSWORD> (the password would ideally be in Key Vault)

Create the cluster

cd cfd_workflow

Note: Before running the next command make sure that you are running in a region that has Hc instances and you have quota there. Alternatively, you can change the instance type to Hb an run in a region where you have quota

azhpc-build

Allow ~10 minutes for deployment.

To check the status of the VMs run

azhpc-status

Connect to the headnode and check PBS and NFS

$ azhpc-connect -u hpcuser headnode
Fri Jun 28 09:18:04 UTC 2019 : logging in to headnode (via headnode6cfe86.westus2.cloudapp.azure.com)
[hpcuser@headnode ~]$ pbsnodes -avS
vnode           state           OS       hardware host            queue        mem     ncpus   nmics   ngpus  comment
--------------- --------------- -------- -------- --------------- ---------- -------- ------- ------- ------- ---------
compuc407000003 free            --       --       10.2.4.8        --            224gb      60       0       0 --
compuc407000002 free            --       --       10.2.4.7        --            224gb      60       0       0 --
[hpcuser@headnode ~]$ sudo exportfs -v
/share/apps     <world>(sync,wdelay,hide,no_subtree_check,sec=sys,rw,secure,root_squash,no_all_squash)
/share/data     <world>(sync,wdelay,hide,no_subtree_check,sec=sys,rw,secure,root_squash,no_all_squash)
/share/home     <world>(sync,wdelay,hide,no_subtree_check,sec=sys,rw,secure,root_squash,no_all_squash)
/mnt/resource/scratch
                <world>(sync,wdelay,hide,no_subtree_check,sec=sys,rw,secure,root_squash,no_all_squash)
[hpcuser@headnode ~]$

To check the state of the cluster you can run the following commands

• qstat -Q
• df -h

Return to the deployment node to install applations

exit

Install applications

First copy the apps directory to the cluster. The azhpc-scp can be used to do this:

azhpc-scp -r $azhpc_dir/apps hpcuser@headnode:.

Alternatively you can checkout the azurehpc repository but you will need to update the paths according to where you put it.

Install OpenFOAM from tarball

This install will download the binaries and install:

azhpc-run -u hpcuser apps/openfoam_org/install_openfoam.sh

Alternatively the install_openfoam_6_impi2018_gcc82.sh script will build from source.

Paraview Installation

This will install the Windows version of ParaView in the shared directory which will be mounted on the Windows VM.

azhpc-run -u hpcuser apps/paraview/install_paraview_v5.6.1.sh

Run OpenFOAM

OpenFOAM is run on the headnode. First, Log-in to headnode as hpcuser

azhpc-connect -u hpcuser headnode

Run motorbike_2m model

qsub -l select=2:ncpus=60:mpiprocs=60,place=scatter:excl \
    -N OF_motorbike_2m $HOME/apps/openfoam_org/motorbike_2m.sh

On 2 Hb nodes (120 cores) it takes ~3-4 min to run

qstat -aw

Remote Visualization

Connect to the viznode using RDP (get the RDP file for nvnode from the Azure Portal)

• Username: hpcadmin
• Password:

Check that Y: and Z: drives are mapped to the NFS server

Note : Y: and Z: drives appears as disconnected while they are not.

Launch Paraview from the Y: drive (Y:\paraview\ParaView-5.6.1-Windows-msvc2015-64bit\bin\paraview) and then, from paraview, open the openfoam result file located on the Z: drive (Z:\motorbike_scaled\motorBike.foam)