diff --git a/docs/guidance/EnterpriseScaleAnalytics-NetworkArchitecture.md b/docs/guidance/EnterpriseScaleAnalytics-NetworkArchitecture.md index cd01c61..73cffd8 100644 --- a/docs/guidance/EnterpriseScaleAnalytics-NetworkArchitecture.md +++ b/docs/guidance/EnterpriseScaleAnalytics-NetworkArchitecture.md @@ -1,6 +1,6 @@ # Network Architecture Considerations -Enterprise-Scale Analytics promises the possibility to easily share and access datasets across multiple data domains and Data Landing Zones without critical bandwidth limitations and without creating multiple copies of the same dataset. To deliver on that promise, different network designs had to be considered, evaluated and tested to make sure that these are compatible with the existing Hub and Spoke and vWAN deployments of corporations. Based on the current capabilities of Azure Networking Services it is recommended to rely on a meshed network architecture. What this means is that it is recommended to setup Vnet peering between +Enterprise-Scale Analytics promises the possibility to easily share and access datasets across multiple data domains and Data Landing Zones without critical bandwidth or latency limitations and without creating multiple copies of the same dataset. To deliver on that promise, different network designs had to be considered, evaluated and tested to make sure that these are compatible with the existing Hub and Spoke and vWAN deployments of corporations. Based on the current capabilities of Azure Networking Services it is recommended to rely on a meshed network architecture. What this means is that it is recommended to setup Vnet peering between 1. The Connectivity Hub and Data Management Zone, 2. The Connectivity Hub and each Data Landing Zone, @@ -9,7 +9,7 @@ Enterprise-Scale Analytics promises the possibility to easily share and access d ![Meshed Network Architecture](/docs/images/NetworkOptions-NetworkMesh.png) -To explain the rationale behind the recommended design, this article will illustrate the advantages and disadvantages that come with each of the different network architecture approaches that were considered when designing Enterprise-Scale Analytics. Every design pattern will be evaluated along the following criteria: Cost, User Access Management, Service Management and Bandwidth. Each scenario will be analyzed with the following cross-Data Landing Zone use-case in mind: +To explain the rationale behind the recommended design, this article will illustrate the advantages and disadvantages that come with each of the different network architecture approaches that were considered when designing Enterprise-Scale Analytics. Every design pattern will be evaluated along the following criteria: Cost, User Access Management, Service Management and Bandwidth & Latency. Each scenario will be analyzed with the following cross-Data Landing Zone use-case in mind: --- @@ -17,7 +17,47 @@ _Virtual machine B (VM B) hosted in Data Landing Zone B loads a dataset from Sto --- -## 1. Traditional Hub & Spoke Design (NOT Recommended) +## 1. Meshed Network Architecture (Recommended) + +The recommended design proposes the use of a network mesh, which means adding Vnet peerings between all Data Landing Zone Vnets and between the Data Management Zone and each Data Landing Zone in addition to the existing Hub and Spoke network design that most organizations have setup inside their tenant. For the scenario mentioned in the introduction, data loaded from Storage Account A would first transition a Vnet peering connection (2) that is setup between the two Data Landing Zone Vnets before it would be loaded and processed by VM B ((3) and (4)). Lastly, the data can be stored on Storage Account B by sending the data through the local Private Endpoint (5). With this option, the data does not pass the Connectivity Hub and stays within the Data Platform consisting of a Data Management Zones and one or multiple Data Landing Zones. + +![Meshed Network Architecture](/docs/images/NetworkOptions-MeshedNetworkArchitecture.png) + +### User Access Management + +With this solution approach Data Product teams will only require write access to their dedicated resource group in the Data Landing Zone as well as join access to their designated subnet to be able to create new services including the Private Endpoints in a self-service manner. Therefore, Data Product teams can deploy Private Endpoints themselves and don't require support to setup the necessary connectivity if they get the necessary access rights provided to connect Private Endpoints to a subnet in that Spoke. + +Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: + +### Service Management + +This network design has the benefit that there is no NVA acting as a single point of failure or throttling throughput. Not sending the datasets through the Connectivity Hub also reduces the management overhead for the central Azure platform team, as there is no need for scaling out the virtual appliance. This has the implication that the central Azure platform team can no longer inspect and log all traffic that is sent between Data Landing Zones. Nonetheless, this is not seen as disadvantage since Enterprise-Scale Analytics can be considered as coherent platform that spans across multiple subscriptions to allow for scale and overcome platform level limitations. If all resources would be hosted inside a single subscription, traffic would also not be inspected in the central Connectivity Hub. In addition, network logs can still be captured through the use of Network Security Group Flow Logs and additional application and service level logs can be consolidated and stored through the use of service specific Diagnostic Settings. All of these logs can be captured at scale through the use of [Azure Policies](/infra/Policies/PolicyDefinitions/DiagnosticSettings/). Also, this pattern allows for an Azure native DNS solution based on Private DNS Zones and allows for the automation of the DNS A-record lifecycle through [Azure Policies](/infra/Policies/PolicyDefinitions/PrivateDnsZoneGroups/). + +Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: + +### Cost + +--- + +_When accessing a Private Endpoint across a peered network customers will only ever be charged for the private Endpoint itself and not for the Vnet peering. The official statement can be found [here (FAQ: How will billing work when accessing a Private Endpoint from a peered network?)](https://azure.microsoft.com/en-us/pricing/details/private-link/)._ + +--- + +With this network design, customers only pay for the Private Endpoints (charged per hour) as well as the ingress and egress traffic that is sent through the Private Endpoints to load the raw (1) and store the processed dataset (6). Due to the statement above, the Vnet peering will not be charged (2), which is why we end up with minimal cost with this option. + +Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: + +### Bandwidth and Latency + +Due to the fact that there are no NVAs limiting throughput for cross-Data Landing Zone data exchange, there are no known limitations from a bandwidth and latency perspective. Physical limits in our datacenters are the only limiting factor (speed of fiber cables/light). + +Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: + +### Summary + +The meshed network design offers maximum bandwidth and low latency at minimal cost without any compromises from a user access management perspective or on the DNS layer. Hence, this network architecture design is the recommended for customers wanting to adopt Enterprise-Scale Analytics. If additional network policies need to be enforced within the Data Platform, it is advised to use Network Security Groups instead of central NVAs. + +## 2. Traditional Hub & Spoke Design (NOT Recommended) The most obvious option is to leverage the traditional Hub & Spoke network architecture that many enterprises have adopted. Network transitivity would have to be setup in the Connectivity Hub in order to be able to access data in Storage Account A from VM B. Data would traverse two Vnet peerings ((2) and (5)) as well as a Network Virtual Appliance (NVA) hosted inside the Connectivity Hub ((3) and (4)) before it gets loaded by the virtual machine (6) and then stored back into the Storage Account B (8). @@ -33,7 +73,7 @@ Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: The most relevant benefit of this network architecture design is that it is well-known and consistent with the existing network setup of most organizations. Therefore, it is easy to explain and implement. In addition, a centralized and Azure native DNS solution with Private DNS Zones can be used to provide FQDN resolution inside the Azure tenant. The use of Private DNS Zones also allows for the automation of the DNS A-record lifecycle through [Azure Policies](/infra/Policies/PolicyDefinitions/PrivateDnsZoneGroups/). Since traffic is routed through a central NVA, network traffic that is sent from one Spoke to another one can also be logged and inspected, which can be another benefit of this design. -A downside of this solution from a service management perspective is that the central Azure Platform team must manage Route Tables manually. This is required to ensure the necessary transitivity between Spokes to enable the process of sharing data assets across multiple Data Landing Zones. The management of routes can become complex and error prone over time and is something that should be considered upfront. The more critical disadvantage of this network setup is the central NVA. Firstly, the NVA acts as a single point of failure and can cause serious downtime inside the data platform in case of a failure. Secondly, as the dataset sizes grow inside the data platform and as the number of cross-Data Landing Zone use cases increases more and more traffic will be sent through the central NVA. Over time, this can result in gigabytes or terabytes of data that is sent through the central instance. However, the bandwidth of existing NVAs is often limited to a one- or two-digit gigabyte bandwidth. Therefore, the appliance can act as a critical bottleneck limiting the traffic flowing between Data Landing Zones and therefore limiting the shareability of data assets. The only way to overcome this issue would be to scale out the central NVA across multiple instances, which will have huge implications on cost of this solution. +A downside of this solution from a service management perspective is that the central Azure Platform team must manage Route Tables manually. This is required to ensure the necessary transitivity between Spokes to enable the process of sharing data assets across multiple Data Landing Zones. The management of routes can become complex and error-prone over time and is something that should be considered upfront. The more critical disadvantage of this network setup is the central NVA. Firstly, the NVA acts as a single point of failure and can cause serious downtime inside the data platform in case of a failure. Secondly, as the dataset sizes grow inside the data platform and as the number of cross-Data Landing Zone use cases increases more and more traffic will be sent through the central NVA. Over time, this can result in gigabytes or terabytes of data that is sent through the central instance. However, the bandwidth of existing NVAs is often limited to a one- or two-digit gigabyte throughput. Therefore, the appliance can act as a critical bottleneck limiting the traffic flowing between Data Landing Zones and therefore limiting the shareability of data assets. The only way to overcome this issue would be to scale out the central NVA across multiple instances, which will have huge implications on cost of this solution. Summary: :heavy_minus_sign: @@ -49,17 +89,17 @@ From a network perspective, customers have to pay for the two Private Endpoints Summary: :heavy_minus_sign::heavy_minus_sign::heavy_minus_sign: -### Bandwidth +### Bandwidth & Latency -This network design has serious limitations from a bandwidth perspective. The central NVA will become a critical bottleneck as the platform grows, which will limit cross-Data Landing Zone use cases and sharing of datasets and most likely lead to a situation where multiple copies of datasets will be created over time. +This network design has serious limitations from a bandwidth perspective. The central NVA will become a critical bottleneck as the platform grows, which will limit cross-Data Landing Zone use cases and sharing of datasets and most likely lead to a situation where multiple copies of datasets will be created over time. In addition to bandwidth, latency will be heavily impacted by that network design, which is especially critical for real-time analytics scenarios. Summary: :heavy_minus_sign::heavy_minus_sign::heavy_minus_sign: ### Summary -From an access management and partially from a service management perspective, this setup has benefits. But due to the critical limitations pointed out in the service management, cost and bandwidth section, this network design cannot be recommended for cross-Data Landing Zone use cases. +From an access management and partially from a service management perspective, this setup has benefits. But due to the critical limitations pointed out in the service management, cost and bandwidth & latency section, this network design cannot be recommended for cross-Data Landing Zone use cases. -## 2. Private Endpoint Projection (NOT Recommended) +## 3. Private Endpoint Projection (NOT Recommended) Another design alternative that was evaluated was the projection of Private Endpoints across each and every Landing Zone. With this approach, a Private Endpoint for Storage Account A would be created each Data Landing Zone. Therefore, this option leads to a first Private Endpoint in Data Landing Zone A that is connected to the Vnet in Data Landing Zone A, a second Private Endpoint in Data Landing Zone B that is connected to the Vnet in Data Landing Zone B, etc. The same applies to Storage Account B and potentially other services inside the Data Landing Zones. If the number of Data Landing Zones is defined as _n_, one would end up with _n_ Private Endpoints for at least all of the storage accounts and potentially other services within the Data Landing Zones leading to an exponential growth of the number of Private Endpoints. @@ -71,13 +111,13 @@ With this setup, VM B can load the raw dataset in Storage Account A by accessing ### User Access Management -From a user access management perspective, this scenario is very similar to the first option except for the fact that access rights may also be required for other Data Landing Zones to not just create Private Endpoints within the designated Data Landing Zone and Vnet but also in the other Data Landing Zones and their respective Vnets. Hence, Data Product teams may not only require write access to a resource group in the designated Data Landing Zone as well as join access to their designated subnet to be able to create new services including the Private Endpoints in a self-service manner, but they may also require access to a resource group and subnet inside the other Data Landing Zones to create the respective local Private Endpoints. In summary, this setup increases the complexity on the access management layer since Data Product teams may require few permissions not just in a single but in each and every Data Landing Zone. In addition, it may lead to confusion and inconsistent RBAC over time. If required access rights are not provided to Data Landing Zone teams or Data Product teams, problems described in [Option 1: Traditional Hub & Spoke Design](#option-1-traditional-hub--spoke-design) will be applicable. +From a user access management perspective, this scenario is very similar to the first option except for the fact that access rights may also be required for other Data Landing Zones to not just create Private Endpoints within the designated Data Landing Zone and Vnet but also in the other Data Landing Zones and their respective Vnets. Hence, Data Product teams may not only require write access to a resource group in the designated Data Landing Zone as well as join access to their designated subnet to be able to create new services including the Private Endpoints in a self-service manner, but they may also require access to a resource group and subnet inside the other Data Landing Zones to create the respective local Private Endpoints. In summary, this setup increases the complexity on the access management layer since Data Product teams may require few permissions not just in a single but in each and every Data Landing Zone. In addition, it may lead to confusion and inconsistent RBAC over time. If required access rights are not provided to Data Landing Zone teams or Data Product teams, problems described in [Option 2: Traditional Hub & Spoke Design](#2-traditional-hub--spoke-design-not-recommended) will be applicable. Summary: :heavy_minus_sign: ### Service Management -Option 2 has the benefit that there is no NVA acting as a single point of failure or throttling throughput. Not sending the datasets through the Connectivity Hub also reduces the management overhead for the central Azure platform team, as there is no need for scaling out the virtual appliance. This has the implication that the central Azure platform team can no longer inspect and log all traffic that is sent between Data Landing Zones. Nonetheless, this is not seen as disadvantage since Enterprise-Scale Analytics can be considered as coherent platform that spans across multiple subscriptions to allow for scale and overcome platform level limitations. If all resources would be hosted inside a single subscription, traffic would also not be inspected in the central Connectivity Hub. In addition, network logs can still be captured through the use of Network Security Group Flow Logs and additional application and service level logs can be consolidated and stored through the use of service specific Diagnostic Settings. All of these logs can be captured at scale through the use of [Azure Policies](/infra/Policies/PolicyDefinitions/DiagnosticSettings/). +Similar to [Option 1](#1-meshed-network-architecture-recommended),this network design has the benefit that there is no NVA acting as a single point of failure or throttling throughput. Not sending the datasets through the Connectivity Hub also reduces the management overhead for the central Azure platform team, as there is no need for scaling out the virtual appliance. This has the implication that the central Azure platform team can no longer inspect and log all traffic that is sent between Data Landing Zones. Nonetheless, this is not seen as disadvantage since Enterprise-Scale Analytics can be considered as coherent platform that spans across multiple subscriptions to allow for scale and overcome platform level limitations. If all resources would be hosted inside a single subscription, traffic would also not be inspected in the central Connectivity Hub. In addition, network logs can still be captured through the use of Network Security Group Flow Logs and additional application and service level logs can be consolidated and stored through the use of service specific Diagnostic Settings. All of these logs can be captured at scale through the use of [Azure Policies](/infra/Policies/PolicyDefinitions/DiagnosticSettings/). On the other hand, the exponential growth of the number of required Private Endpoints also increases the network address space required by the data platform, which is not optimal. Lastly, the above-mentioned DNS challenges are the biggest concern of this network architecture. An Azure native solution in the form of Private DNS Zones cannot be used. Hence, a third-party solution will be required that is capable of resolving FQDNS based on the origin/IP-address of the requestor. In addition, tools and workflows must be developed and maintained to automate the lifecycle of Private DNS A-records which drastically increases the management overhead compared to the proposed [Azure Policy driven solution](/infra/Policies/PolicyDefinitions/PrivateDnsZoneGroups/). It would also be possible to create a distributed DNS infrastructure using Private DNS Zones, but with this solution DNS islands would be created which ultimately lead to issues when trying to access private link services hosted other Landing Zones within the tenant. Therefore, this is not a viable alternative. @@ -95,9 +135,9 @@ With this network design, customers only pay for the Private Endpoints (charged Summary: :heavy_plus_sign: -### Bandwidth +### Bandwidth and Latency -Due to the fact that there are no NVAs limiting throughput for cross-Data Landing Zone data exchange, there are no known limitations from a bandwidth perspective. Physical limits in our datacenters are the only limiting factor (speed of fiber cables/light). +Due to the fact that there are no NVAs limiting throughput for cross-Data Landing Zone data exchange, there are no known limitations from a bandwidth and latency perspective. Physical limits in our datacenters are the only limiting factor (speed of fiber cables/light). Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: @@ -105,9 +145,9 @@ Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: This network architecture suffers from the potential exponential growth of Private Endpoints which may even cause losing track of which Private Endpoints are used where and for which purpose. Another limiting factor are the access management issues described above as well as the complexities created on the DNS layer. Therefore, this network design cannot be recommended. -## 3. Private Endpoints in Connectivity Hub (NOT Recommended) +## 4. Private Endpoints in Connectivity Hub (NOT Recommended) -The third option proposes to host the Private Endpoints in the Connectivity Hub and connect them to the Hub Vnet. With this solution, a single Private Endpoint for each service would be hosted on the corporate Vnet. Transitivity would also not be required due to the existing Hub and Spoke network architecture at most corporations and the fact that the Private Endpoints would be hosted in the Connectivity Hub with this solution. The Vnet peering between the Connectivity Hub and Data Landing Zones allow for a direct access. +The fourth option proposes to host the Private Endpoints in the Connectivity Hub and connect them to the Hub Vnet. With this solution, a single Private Endpoint for each service would be hosted on the corporate Vnet. Transitivity would also not be required due to the existing Hub and Spoke network architecture at most corporations and the fact that the Private Endpoints would be hosted in the Connectivity Hub with this solution. The Vnet peering between the Connectivity Hub and Data Landing Zones allow for a direct access. In order to load a dataset stored in Storage Account A in VM B, data would have to traverse a single Vnet peering between the Connectivity Hub and the Data Landing Zone (5). Once the dataset has been loaded and processed ((3) and (4)) the dataset must traverse the Vnet peering a second time (5) before it can be stored on Storage Account B by accessing the Private Endpoint connected to the Hub Vnet (6). @@ -121,7 +161,7 @@ Summary: :heavy_minus_sign::heavy_minus_sign::heavy_minus_sign: ### Service Management -Similar to Option 2, this network design has the benefit that there is no NVA acting as a single point of failure or throttling throughput. Not sending the datasets through the Connectivity Hub also reduces the management overhead for the central Azure platform team, as there is no need for scaling out the virtual appliance. This has the implication that the central Azure platform team can no longer inspect and log all traffic that is sent between Data Landing Zones. Nonetheless, this is not seen as disadvantage since Enterprise-Scale Analytics can be considered as coherent platform that spans across multiple subscriptions to allow for scale and overcome platform level limitations. If all resources would be hosted inside a single subscription, traffic would also not be inspected in the central Connectivity Hub. In addition, network logs can still be captured through the use of Network Security Group Flow Logs and additional application and service level logs can be consolidated and stored through the use of service specific Diagnostic Settings. All of these logs can be captured at scale through the use of [Azure Policies](/infra/Policies/PolicyDefinitions/DiagnosticSettings/). Also, this pattern allows for an Azure native DNS solution based on Private DNS Zones and allows for the automation of the DNS A-record lifecycle through [Azure Policies](/infra/Policies/PolicyDefinitions/PrivateDnsZoneGroups/). +Similar to [Option 1](#1-meshed-network-architecture-recommended), this network design has the benefit that there is no NVA acting as a single point of failure or throttling throughput. Not sending the datasets through the Connectivity Hub also reduces the management overhead for the central Azure platform team, as there is no need for scaling out the virtual appliance. This has the implication that the central Azure platform team can no longer inspect and log all traffic that is sent between Data Landing Zones. Nonetheless, this is not seen as disadvantage since Enterprise-Scale Analytics can be considered as coherent platform that spans across multiple subscriptions to allow for scale and overcome platform level limitations. If all resources would be hosted inside a single subscription, traffic would also not be inspected in the central Connectivity Hub. In addition, network logs can still be captured through the use of Network Security Group Flow Logs and additional application and service level logs can be consolidated and stored through the use of service specific Diagnostic Settings. All of these logs can be captured at scale through the use of [Azure Policies](/infra/Policies/PolicyDefinitions/DiagnosticSettings/). Also, this pattern allows for an Azure native DNS solution based on Private DNS Zones and allows for the automation of the DNS A-record lifecycle through [Azure Policies](/infra/Policies/PolicyDefinitions/PrivateDnsZoneGroups/). Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: @@ -137,9 +177,9 @@ With this network design, customers only pay for the Private Endpoints (charged Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: -### Bandwidth +### Bandwidth and Latency -Due to the fact that there are no NVAs limiting throughput for cross-Data Landing Zone data exchange, there are no known limitations from a bandwidth perspective. Physical limits in our datacenters are the only limiting factor (speed of fiber cables/light). +Due to the fact that there are no NVAs limiting throughput for cross-Data Landing Zone data exchange, there are no known limitations from a bandwidth and latency perspective. Physical limits in our datacenters are the only limiting factor (speed of fiber cables/light). Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: @@ -147,46 +187,6 @@ Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: There are many benefits that come with this network architecture design. However, the above-mentioned inconsistencies from an access management perspectives make the design subpar and consequently the approach does not qualify as a recommended design. -## 4. Meshed Network Architecture (Recommended) - -The recommended design proposes the use of a network mesh, which means adding Vnet peerings between all Data Landing Zone Vnets and between the Data Management Zone and each Data Landing Zone in addition to the existing Hub and Spoke network design that most organizations have setup inside their tenant. For the scenario mentioned in the introduction, data loaded from Storage Account A would first transition a Vnet peering connection (2) that is setup between the two Data Landing Zone Vnets before it would be loaded and processed by VM B ((3) and (4)). Lastly, the data can be stored on Storage Account B by sending the data through the local Private Endpoint (5). With this option, the data does not pass the Connectivity Hub and stays within the Data Platform consisting of a Data Management Zones and one or multiple Data Landing Zones. - -![Meshed Network Architecture](/docs/images/NetworkOptions-MeshedNetworkArchitecture.png) - -### User Access Management - -With this solution approach Data Product teams will only require write access to their dedicated resource group in the Data Landing Zone as well as join access to their designated subnet to be able to create new services including the Private Endpoints in a self-service manner. Therefore, Data Product teams can deploy Private Endpoints themselves and don't require support to setup the necessary connectivity if they get the necessary access rights provided to connect Private Endpoints to a subnet in that Spoke. - -Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: - -### Service Management - -Similar to Option 2, this network design has the benefit that there is no NVA acting as a single point of failure or throttling throughput. Not sending the datasets through the Connectivity Hub also reduces the management overhead for the central Azure platform team, as there is no need for scaling out the virtual appliance. This has the implication that the central Azure platform team can no longer inspect and log all traffic that is sent between Data Landing Zones. Nonetheless, this is not seen as disadvantage since Enterprise-Scale Analytics can be considered as coherent platform that spans across multiple subscriptions to allow for scale and overcome platform level limitations. If all resources would be hosted inside a single subscription, traffic would also not be inspected in the central Connectivity Hub. In addition, network logs can still be captured through the use of Network Security Group Flow Logs and additional application and service level logs can be consolidated and stored through the use of service specific Diagnostic Settings. All of these logs can be captured at scale through the use of [Azure Policies](/infra/Policies/PolicyDefinitions/DiagnosticSettings/). Also, this pattern allows for an Azure native DNS solution based on Private DNS Zones and allows for the automation of the DNS A-record lifecycle through [Azure Policies](/infra/Policies/PolicyDefinitions/PrivateDnsZoneGroups/). - -Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: - -### Cost - ---- - -_When accessing a Private Endpoint across a peered network customers will only ever be charged for the private Endpoint itself and not for the Vnet peering. The official statement can be found [here (FAQ: How will billing work when accessing a Private Endpoint from a peered network?)](https://azure.microsoft.com/en-us/pricing/details/private-link/)._ - ---- - -With this network design, customers only pay for the Private Endpoints (charged per hour) as well as the ingress and egress traffic that is sent through the Private Endpoints to load the raw (1) and store the processed dataset (6). Due to the statement above, the Vnet peering will not be charged (2), which is why we end up with minimal cost with this option. - -Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: - -### Bandwidth - -Due to the fact that there are no NVAs limiting throughput for cross-Data Landing Zone data exchange, there are no known limitations from a bandwidth perspective. Physical limits in our datacenters are the only limiting factor (speed of fiber cables/light). - -Summary: :heavy_plus_sign::heavy_plus_sign::heavy_plus_sign: - -### Summary - -The meshed network design offers maximum bandwidth at minimal cost without any compromises from a user access management perspective or on the DNS layer. Hence, this network architecture design is the recommended for customers wanting to adopt Enterprise-Scale Analytics. If additional network policies need to be enforced within the Data Platform, it is advised to use Network Security Groups instead of central NVAs. - ## Conclusion -After reviewing all network architecture options from various angles and identifying pros and cons of each proposed pattern, [Option 4](#option-4-meshed-network-architecture-recommended) is the clear winner. Not only from a throughput perspective, but also from a cost and management perspective the solution has tremendous benefits and therefore should be used when deploying Enterprise-Scale Analytics. Peering spoke Virtual Networks has not been common in the past, but not doing so has also led to various issues when starting to share datasets across domains and business units. In addition, one can also argue that Enterprise-Scale Analytics can be seen as coherent solution that just spans across multiple subscriptions. In a single subscription setup, the network traffic flow would be equal to the flow in the meshed network architecture, with the difference that within a single subsciption users will most likely hit [subscription level limits and quotas](https://docs.microsoft.com/en-us/azure/azure-resource-manager/management/azure-subscription-service-limits) of the platform, which is something that Enterprise-Scale Analytics wants to protect against. +After reviewing all network architecture options from various angles and identifying pros and cons of each proposed pattern, [Option 1](#1-meshed-network-architecture-recommended) is the clear winner. Not only from a throughput perspective, but also from a cost and management perspective the solution has tremendous benefits and therefore should be used when deploying Enterprise-Scale Analytics. Peering spoke Virtual Networks has not been common in the past, but not doing so has also led to various issues when starting to share datasets across domains and business units. In addition, one can also argue that Enterprise-Scale Analytics can be seen as coherent solution that just spans across multiple subscriptions. In a single subscription setup, the network traffic flow would be equal to the flow in the meshed network architecture, with the difference that within a single subsciption users will most likely hit [subscription level limits and quotas](https://docs.microsoft.com/en-us/azure/azure-resource-manager/management/azure-subscription-service-limits) of the platform, which is something that Enterprise-Scale Analytics wants to protect against.