Граф коммитов

276 Коммитов

Автор SHA1 Сообщение Дата
Daniel Stenberg 492aed1450 mention some alternative method names in the docs for --request 2009-10-01 07:37:58 +00:00
Daniel Stenberg cd91a1eeca mention "quiet" for the --silent option to get easier to find 2009-10-01 07:35:15 +00:00
Daniel Stenberg 95c2b205a4 - Eric Wong introduced support for the new option -T. (dot) that makes curl
read stdin in a non-blocking fashion. This also brings back -T- (minus) to
  the previous blocking behavior since it could break stuff for people at
  times.
2009-08-24 10:57:17 +00:00
Daniel Stenberg 62960f8a42 I think it's worth clarifying that curl DOES NOT validate a given URL more
than what's absolutely necessary:

curl will do its best to use what you pass to it as a URL. It is not trying to
validate it as a syntactically correct URL by any means but is instead
VERY liberal with what it accepts.
2009-08-14 18:09:42 +00:00
Daniel Stenberg 37d509f04f RFC1867 was updated by RFC2388 2009-08-04 12:02:27 +00:00
Daniel Stenberg 3050f10676 silly typo, pointed out by Fabian Keil 2009-06-30 21:32:52 +00:00
Daniel Stenberg 4f551259dd - Markus Koetter made CURLOPT_FTPPORT (and curl's -P/--ftpport) support a port
range if given colon-separated after the host name/address part. Like
  "192.168.0.1:2000-10000"
2009-06-29 20:46:01 +00:00
Daniel Stenberg 70e2db51e1 - bug report #2779245 (http://curl.haxx.se/bug/view.cgi?id=2779245) by Rainer
Koenig pointed out that the man page didn't tell that the *_proxy
  environment variables can be specified lower case or UPPER CASE and the
  lower case takes precedence,
2009-04-23 22:01:33 +00:00
Daniel Stenberg de25ed3f37 mention the '-o -' trick 2009-02-27 13:52:05 +00:00
Daniel Stenberg 11f3690201 clarified the FTP passive/active mode options somewhat 2009-02-20 09:14:25 +00:00
Dan Fandrich 42d2353e74 Fixed a typo (spotted in the FreeBSD ports). 2009-02-04 23:40:57 +00:00
Daniel Stenberg bdd4294e79 - Craig A West brought us: libcurl now defaults to do CONNECT with HTTP
version 1.1 instead of 1.0 like before. This change also introduces the new
  proxy type for libcurl called 'CURLPROXY_HTTP_1_0' that then allows apps to
  switch (back) to CONNECT 1.0 requests. The curl tool also got a --proxy1.0
  option that works exactly like --proxy but sets CURLPROXY_HTTP_1_0.

  I updated all test cases cases that use CONNECT and I tried to do some using
  --proxy1.0 and some updated to do CONNECT 1.1 to get both versions run.
2009-02-02 16:19:23 +00:00
Daniel Stenberg de4610a55f - Markus Moeller introduced two new options to libcurl:
CURLOPT_SOCKS5_GSSAPI_SERVICE and CURLOPT_SOCKS5_GSSAPI_NEC to allow libcurl
  to do GSS-style authentication with SOCKS5 proxies. The curl tool got the
  options called --socks5-gssapi-service and --socks5-gssapi-nec to enable
  these.
2009-01-28 21:33:58 +00:00
Daniel Stenberg 5aeef9c1c8 - Craig A West brought CURLOPT_NOPROXY and the corresponding --noproxy option.
They basically offer the same thing the NO_PROXY environment variable only
  offered previously: list a set of host names that shall not use the proxy
  even if one is specified.
2009-01-25 23:26:25 +00:00
Daniel Stenberg d5bfec70af - Anthony Bryan provided a set of patches that cleaned up manual language,
corrected spellings and more.
2008-12-22 13:07:13 +00:00
Daniel Stenberg bd64da3785 --ftp-method was added in 7.15.1. This mention ends up a bit oddly formatted
but I'm not in the mood to fight nroff right now...
2008-10-29 21:15:24 +00:00
Dan Fandrich bfeae0b5f5 Update docs now that SFTP supports file ranges. 2008-10-09 18:47:02 +00:00
Dan Fandrich 152cf6325d Checked in some grammatical and minor other fixes in the documentation and
examples that I found in the FreeBSD ports system.
2008-09-10 07:11:45 +00:00
Dan Fandrich f7cce15156 Mike Revi discovered some swapped speed switches documented in the curl man
page.
2008-09-09 18:45:52 +00:00
Daniel Stenberg 18110b519c - Martin Drasar provided the CURLOPT_POSTREDIR patch. It renames
CURLOPT_POST301 (but adds a define for backwards compatibility for you who
  don't define CURL_NO_OLDIES). This option allows you to now also change the
  libcurl behavior for a HTTP response 302 after a POST to not use GET in the
  subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the
  patch somewhat before commit. The curl tool got a matching --post302
  option. Test case 1076 was added to verify this.
2008-09-05 16:13:20 +00:00
Daniel Stenberg 473a050f0b the .netrc curl checks for is called _netrc on windows bug report #2061610 2008-08-20 21:06:56 +00:00
Dan Fandrich 6768e81d5d Added an edited version of Vincent Le Normand's documentation of SFTP quote
commands to the man pages.
2008-08-20 19:45:43 +00:00
Dan Fandrich 42cabc14d4 Added support for --append on SFTP uploads. Unfortunately, OpenSSH doesn't
support this so it goes untested.
2008-08-01 18:41:14 +00:00
Daniel Stenberg 03986f1b8b - Made the curl tool's -w option support the %{ssl_verify_result} variable 2008-07-30 21:24:19 +00:00
Daniel Stenberg e58a3fd0aa document the exit codes 82 and 83 that are new in 7.19.0 2008-07-11 10:50:30 +00:00
Daniel Stenberg 120f9d81b2 s/muse/must 2008-07-10 08:00:05 +00:00
Daniel Stenberg fa38839a80 document --remote-name-all 2008-07-10 07:53:10 +00:00
Daniel Stenberg 7c648782bc Introcuding a new timestamp for curl_easy_getinfo():
CURLINFO_APPCONNECT_TIME. This is set with the "application layer"
handshake/connection is completed (typically SSL, TLS or SSH). By using this
you can figure out the application layer's own connect time. You can extract
the time stamp using curl's -w option and the new variable named
'time_appconnect'. This feature was sponsored by Lenny Rachitsky at NeuStar.
2008-07-03 06:56:03 +00:00
Daniel Stenberg c6efb82526 the next release is now called 7.19.0 2008-06-08 21:04:46 +00:00
Daniel Stenberg 5abfdc0140 - curl the tool now deals with its command line options somewhat differently!
All boolean options (such as -O, -I, -v etc), both short and long versions,
  now always switch on/enable the option named. Using the same option multiple
  times thus make no difference. To switch off one of those options, you need
  to use the long version of the option and type --no-OPTION. Like to disable
  verbose mode you use --no-verbose!

- Added --remote-name-all to curl, which if used changes the default for all
  given URLs to be dealt with as if -O is used. So if you want to disable that
  for a specific URL after --remote-name-all has been used, you muse use -o -
  or --no-remote-name.
2008-06-08 20:53:49 +00:00
Daniel Stenberg 852989856d - To make it easier for applications that want lots of magic stuff done on
redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now
  introduce the new CURLINFO_REDIRECT_URL option that lets applications
  extract the URL libcurl would've redirected to if it had been told to. This
  then enables the application to continue to that URL as it thinks is
  suitable, without having to re-implement the magic of creating the new URL
  from the Location: header etc. Test 1029 verifies it.
2008-04-30 21:20:08 +00:00
Dan Fandrich b74cdee6ab --ftp-create-dirs works on SFTP as well 2008-03-13 20:49:06 +00:00
Daniel Stenberg ec54fbd9ed just mention in --cacert that curl normally has a default ca cert path built-in 2008-02-18 11:40:52 +00:00
Daniel Stenberg e67b2524d1 using anyauth isn't unconditionally an extra roundtrip 2008-01-25 22:35:06 +00:00
Daniel Stenberg 19ae96f4d0 Michal Marek's improved .curlrc syntax description 2008-01-15 08:45:22 +00:00
Daniel Stenberg f866af912d Eric Landes provided the patch (edited by me) that introduces the
--keepalive-time to curl to set the keepalive probe interval. I also took
the opportunity to rename the recently added no-keep-alive option to
no-keepalive to keep a consistent naming and to avoid getting two dashes in
these option names. Eric also provided an update to the man page for the new
option.
2008-01-12 22:10:53 +00:00
Daniel Stenberg 08adf67969 Daniel Egger made CURLOPT_RANGE work on file:// URLs the very same way it
already worked for FTP:// URLs
2008-01-11 14:20:41 +00:00
Daniel Stenberg de23b98522 Introducing curl_easy_pause() and new magic return codes for both the read
and the write callbacks that now can make a connection's reading and/or
writing get paused.
2008-01-08 14:52:05 +00:00
Daniel Stenberg b430576436 Based on further discussion on curl-library, I reverted yesterday's SOCKS5
code to instead introduce support for a new proxy type called
CURLPROXY_SOCKS5_HOSTNAME that is used to send the host name to the proxy
instead of IP address and there's thus no longer any need for a new
curl_easy_setopt() option.

The default SOCKS5 proxy is again back to sending the IP address to the
proxy.  The new curl command line option for enabling sending host name to a
SOCKS5 proxy is now --socks5-hostname.
2008-01-05 22:04:18 +00:00
Daniel Stenberg 2e42b0a252 Based on Maxim Perenesenko's patch, we now do SOCKS5 operations and let the
proxy do the host name resolving and only if --socks5ip (or
CURLOPT_SOCKS5_RESOLVE_LOCAL) is used we resolve the host name locally and
pass on the IP address only to the proxy.
2008-01-04 23:01:00 +00:00
Daniel Stenberg a46b40b7fd Richard Atterer brought a patch that added support for SOCKS4a proxies, which
is an inofficial PROXY4 variant that sends the hostname to the proxy instead
of the resolved address (which is already supported by SOCKS5).  --socks4a is
the curl command line option for it and CURLOPT_PROXYTYPE can now be set to
CURLPROXY_SOCKS4A as well.
2008-01-02 21:40:11 +00:00
Daniel Stenberg 31674559d3 --libcurl was added in 7.16.1, a useful information 2007-12-27 21:44:21 +00:00
Daniel Stenberg ee52ae001c -u addition: If you just give the user name (without entering a colon) curl
will prompt for a password. Denis Bredelet pointed out!
2007-12-14 11:19:56 +00:00
Daniel Stenberg dc24540ed1 Gilles Blanc made the curl tool enable SO_KEEPALIVE for the connections and
added the --no-keep-alive option that can disable that on demand.
2007-12-12 11:22:15 +00:00
Daniel Stenberg ecfede9b3c Alessandro Vesely helped me improve the --data-urlencode's syntax, parser
and documentation.
2007-11-22 09:36:28 +00:00
Daniel Stenberg 1d7e42ee9f rephrased 2007-11-20 22:01:05 +00:00
Daniel Stenberg 600d0b1303 Introuced --data-urlencode to the curl tool for easier url encoding of the
data sent in a post.
2007-11-20 10:08:42 +00:00
Daniel Stenberg 887e8f9265 Chris Leighton:
My understanding is that we use "number" for discrete variables and
"amount" for continuous variables.

So you can say "The amount of flour required depends on..." or, "Last
night I consumed a large amount of beer!".

And, "That tank contains a large number of fish" or, "Over the week I
consumed a number of cases of beer."

I think that features are discrete, so the man page would read "...the
number of features will make your head spin!".
2007-10-13 20:49:51 +00:00
Dan Fandrich 257e38d5c5 Documented error codes 77-80, and fixed the one for 60. 2007-10-09 16:49:41 +00:00
Daniel Stenberg 33a8e6c30c Michal Marek removed the no longer existing return codes from the curl.1
man page.
2007-10-09 08:42:50 +00:00