cf9259dd92
verifyserver() actually returns the pid of the unsecure http and ftp servers
...
when verifying the https and ftps servers
2008-02-13 06:06:57 +00:00
6634e3c3a3
On heavily loaded systems any test server start up can take longer than the
...
timeout passed to startnew, when this happens startnew completes without being
able to read the pidfile and consequently returns a zero pid2.
To fix the above posibility the server pid is recovered from the verification
stage which will actually return the server pid when verification is valid.
2008-02-12 13:47:56 +00:00
75c369dcca
Disable test due to keyword before disabling due to bad server.
2008-02-11 20:10:36 +00:00
6942d313ff
Verify only once test harness sftp server connectivity and functionality.
...
Make sure that the sftp client tool uses the ssh client binary that we have
used to generate the configuration files, otherwise sftp might be using one
located in the preferred path compiled into sftp.
2008-02-10 02:52:17 +00:00
1a340de0e5
To verify that the sftp server is actually running, responsive and that
...
all curl's tests generated configuration and key files are fine, a real
connection is established to the test harness sftp server authenticating
and running a simple sftp remote pwd command.
The verification is done using OpenSSH's or SunSSH's sftp client tool with
a configuration file with the same options as the test harness socks server
with the exception that dynamic forwarding is not used for sftp.
2008-02-08 13:54:02 +00:00
01d95b56a0
fix failure to properly detect SSH and SOCKS servers start up on loaded systems
2008-01-18 09:18:59 +00:00
6893fcaa9b
remove trailing comma too, even though I don't think it does any harm
2008-01-16 22:09:51 +00:00
301ae1ae1b
Nathan Coulter's patch that makes runtests.pl respect the PATH when figuring
...
out what valgrind to run.
2008-01-16 22:08:37 +00:00
69f685056d
startnew() shouldn't return a positive pid as reported in the pidfile
...
by the spawned server itself unless it is actually alive
2008-01-14 19:28:54 +00:00
2b63eb8511
Ooops
2008-01-12 00:12:16 +00:00
f09fe4b49f
Ooops
2008-01-11 21:59:05 +00:00
35be09cf58
When verifying that test harness's SSH and SOCKS servers have been
...
started check also that the process is actually alive, since they
could have died once the pidfile was written out
2008-01-11 20:17:33 +00:00
14ff7e75e0
Temporary change to help debugging SSH server verification failures
2008-01-10 16:19:14 +00:00
32cc75d6cb
Partially cleanup debugging messages in test harness, introduced for
...
new minimum SSH version support for SCP, SFTP and SOCKS tests.
Some verbosity which still remains, will go out before next release.
2008-01-08 20:12:43 +00:00
2408b236ca
Display ssh server log and configuration upon socks server failure
2008-01-08 00:39:31 +00:00
fe0d7aee49
Daniel Egger provided 'nonewline=yes' support for the <stdout> section
2008-01-04 23:31:04 +00:00
a4945fe687
Missing newline at end of message
2008-01-04 19:56:56 +00:00
7a2177dc42
- Display curl_ssh_config when socks server fails to start.
...
- Capability of running socks5 tests must be based on ssh daemon version
and not on ssh client version.
2008-01-04 13:00:40 +00:00
bf6e2f28ba
Make sure @INC is modified before 'using' the sshhelp module.
2008-01-04 03:05:33 +00:00
fd8d862c37
Modify test harness so that the minimum SSH version required to run
...
SCP, SFTP and SOCKS4 tests is now OpenSSH 2.9.9 or SunSSH 1.0
For SOCKS5 tests minimum versions are OpenSSH 3.7 or SunSSH 1.0
2008-01-03 20:48:22 +00:00
9cd30c2012
Use getcwd() to get the directory, which works even if one of the directory
...
components doesn't have read permission set.
2007-12-22 18:25:43 +00:00
08cb30801c
Stop ssh and socks servers when verification fails
2007-11-26 14:26:40 +00:00
788de4f7ba
Providing an explicit bind address besides the port for dynamic application-level
...
port forwarding, our socks port, prevents ssh from running on some systems.
By default, ssh binds local port forwardings to the loopback address, since this
was the address being given as the explicit bind address, now it isn't given.
2007-11-26 14:07:09 +00:00
d59841618d
Temporary change to better debug startup failures
...
of test suite ssh and socks servers.
2007-11-26 02:45:24 +00:00
8d3964782a
Allow different start timeout specification for each server
2007-11-25 03:55:53 +00:00
5b809a3104
make 'checkdied' in runtests.pl more robust
2007-11-23 12:18:45 +00:00
3daa54d636
Revert last change since it breaks running the test suite
...
when builddir is different from srcdir.
2007-11-23 09:50:44 +00:00
8f1829d1d2
Improve chance of running runtests.pl from outside the
...
source tree 'tests' directory
2007-11-23 04:03:46 +00:00
6efb6addf2
Debugging messages to trace startnew failures
2007-11-22 19:56:38 +00:00
61e2e86aef
Temporary change adding additional debugging messages to better pinpoint
...
startup failures of test suite ssh and socks servers.
2007-11-21 19:33:09 +00:00
5376d1047c
This is a temporary change to test if OpenSSH 3.6 and SunSSH 1.1
...
are good/compatible enough to run the test suite ssh server and
socks tests
2007-11-19 17:20:32 +00:00
59dcc7e191
Michal Marek made the test suite remember what test servers that fail to
...
start so that subsequent tries are simply skipped.
2007-11-16 23:06:53 +00:00
44d408204a
Michal Marek fixed the test suite to better deal with the case when the HTTP
...
ipv6 server can't run.
2007-11-15 22:41:31 +00:00
8be493296d
Make postcheck failure message more like the others
2007-11-01 17:42:39 +00:00
3f55ed0ef7
Check that all servers in the <server> section are supported, not just
...
the first.
2007-10-26 19:26:04 +00:00
b7dd186d36
When valgrind is disabled in the test file, don't run it at all (as opposed
...
to running it and ignoring its output).
2007-10-25 19:39:52 +00:00
26c1c8b2ad
Don't show valgrind log files of other tests
2007-10-25 18:07:13 +00:00
824aa5f918
Michal Marek fixed the test script to be able to use valgrind even when the
...
lib is built shared with libtool.
2007-10-25 14:30:51 +00:00
2fce1f3e97
Fixed the -l option of runtests.pl
...
Added support for skipping tests based on key words.
2007-10-11 21:15:09 +00:00
4686adb433
Added variable substitution to the <verify><file> section.
...
Made a few more tests work remotely.
2007-09-20 20:39:17 +00:00
048c74f2fa
Added %CLIENTIP and %CLIENT6IP data file substitution variables.
...
Added hooks to the test suite to make it possible to test a curl running
on a remote host.
2007-09-17 21:42:01 +00:00
c7e0d8c30b
add some better logging when HTTP server start fails, and make the failure
...
really hard if the test server can't be resolved (like for ::1 ipv6)
2007-07-14 22:33:46 +00:00
c45d44fee9
Wait longer for servers to start up since the ssh server needs to generate
...
keys the first time (which can take a while on a slow or loaded host).
Enforce a longer startup wait time for the ssh client SOCKS server, too.
Check for an error code from startnew() when starting any server.
2007-06-11 17:53:10 +00:00
477e27f99d
Fixed the test harness so that it actually kills the ssh being used as
...
the SOCKS server.
2007-06-08 18:56:05 +00:00
873d95a34c
Incorporated Daniel Black's test706 and test707 SOCKS test cases.
2007-06-08 17:21:40 +00:00
1500e95839
Improved compatibility with perl 5.0 on the 'open' calls.
2007-06-08 17:03:50 +00:00
ad80490711
Changed the opens to work on older versions of perl.
...
Redirect ssh output to ssh.log
2007-06-07 22:42:26 +00:00
f0ffb35d55
Fixed some problems in starting SSH for use in SOCKS.
2007-06-07 19:49:09 +00:00
a466b31574
Daniel Black's test suite fixes and initial test cases for SOCKS4/5 using
...
openssh
2007-06-05 13:50:59 +00:00
9583b51d80
In case of test failure, try not to show log files of other tests
2007-05-30 17:15:05 +00:00
5187faeeb9
Improved the test harness to allow running test servers on other than
...
the default port numbers, allowing more than one test suite to run
simultaneously on the same host.
2007-04-30 20:15:33 +00:00
f213d0db98
Added support in runtests.pl for "!n" test numbers to disable individual tests.
2007-04-25 23:18:52 +00:00
9bdb05b4d6
When displaying log files, truncate the really longs ones such as you
...
would get from a torture test.
2007-04-25 20:09:32 +00:00
61d7e720a5
Treat log files and -k the same when running torture tests as when not.
2007-04-24 23:28:57 +00:00
28dde78dde
Added <postcheck> support to the test harness.
2007-04-23 22:58:45 +00:00
35935d71d2
Honour the -a option when -t is enabled.
2007-04-10 00:37:56 +00:00
248a5381d4
In case of test failure, try not to show log files of other tests
2007-04-06 04:24:13 +00:00
70f9a13ecb
Further improve displaying of individual logfiles
2007-04-05 00:14:27 +00:00
3344142b87
fix enumeration of disabled tests when they have the highest number
2007-04-03 15:59:52 +00:00
70550a0572
Improve displaying of logfiles making sure all lines end with \n
...
and avoid using ! as last char of line.
2007-04-03 12:27:03 +00:00
b7131009fb
Changed the test harness to attempt to gracefully shut down servers
...
before resorting to the kill -9 hammer.
Added test harness infrastructure to support scp/sftp tests, using
OpenSSH as the server.
2007-03-24 01:01:28 +00:00
ff314d7600
detect and show if built with yassl, but also set the "openssl" flag internally
...
since that is the API yassl attempts to provide
2007-03-18 22:37:23 +00:00
ae07fd2ba8
libcurl supplies its own crypto hash functions when SSL is disabled, so
...
'crypto' tests aren't dependent on SSL. Compiling with
--disable-crypto-auth will cause test failures, however.
2007-03-12 20:50:16 +00:00
e12d46ac50
Updated the test harness to add a new "crypto" feature check and updated the
...
appropriate test case to use it. For now, this is treated the same as the
"SSL" feature because curl doesn't list it separately.
2007-03-09 23:39:42 +00:00
1962ebf8e7
Updated the test harness to check for protocol support before running each
...
test, fixing KNOWN_BUGS #11 . Fixed some tests to more accurately specify
their required servers and features.
2007-03-09 21:01:39 +00:00
1bfa7dfe39
Added test infrastructure to support basic FTPS tests. This currently
...
supports only ftps:// URLs with --ftp-ssl-control specified, which
implicitly encrypts the control channel but not the data channels. That
allows stunnel to be used with an unmodified ftp server in exactly the
same way that the test https server is set up.
Added test case 400 as a basic FTPS test.
2007-03-08 02:38:49 +00:00
fe0afb211e
5 seconds isn't always enough time to start a server on a loaded system.
2007-02-22 18:35:57 +00:00
7f70dbcad5
Rob Crittenden added support for NSS (Network Security Service) for the
...
SSL/TLS layer. http://www.mozilla.org/projects/security/pki/nss/
2007-02-12 22:32:37 +00:00
b6f889085d
update copyright year notice
2007-01-27 03:43:05 +00:00
44ac2776ae
Fixed a dangling pointer problem that prevented the http_proxy environment
...
variable from being properly used in many cases (and caused test case 63
to fail).
2007-01-25 01:35:43 +00:00
3bae748256
Added precheck that curl supports the 'openssl' engine in test 307.
2007-01-18 18:04:20 +00:00
7a557e984a
Revert runtests.pl back to revision 1.212
...
This is done to back out changes done from revisions 1.213 to 1.217
2006-11-20 16:58:04 +00:00
1e35d95df8
Add some message logging
2006-11-20 10:35:25 +00:00
d8387b418d
stop slaves before stopping servers
2006-11-20 06:22:51 +00:00
8db353e1d7
Avoid passing child pid and test server pid, using the running
...
servers hash, and adjust message arguments accordingly.
2006-11-19 03:47:56 +00:00
0b5e1a9b2f
Avoid keeping dupe pids When forked pid and test server pid is the same one.
2006-11-18 04:07:01 +00:00
74ddbd8a3b
The hash of running servers is now a hash of hashes which for each running
...
server holds not only its two main pids, but also the pidfile of the test
server and the 'slavepidfiles' for ftp* servers. This allows a better control
when stopping servers.
Now from runtests.pl when test servers are stopped they are signalled in
sequence TERM, INT and KILL allowing time in between for them to die. This
will give us a chance of gracefully stopping test servers, which we didn't
have when we were killing them in first instance.
2006-11-17 16:44:22 +00:00
17d4f9513e
Remove showing stderr log files unconditionally for tests 518 and 537.
...
Add failure checking for servers when fork()ed.
Use same code path in 'stopserver' when called with a single or multiple pids.
2006-11-09 13:20:42 +00:00
905ca77c9e
test 518 is all about testing libcurl functionality
...
when more than FD_SETSIZE file descriptors are open.
This means that if for any reason we are not able to
open more than FD_SETSIZE file descriptors then test
518 should not be run.
test 537 is all about testing libcurl functionality
when the system has nearly exhausted the number of
free file descriptors. Test 537 will try to run with
very few free file descriptors.
2006-11-01 18:33:50 +00:00
f51c567de3
Show stderr log file for test 518 unconditionally.
...
In this way we'll be able to sort out problems that might
arise in the prechek phase of the 518 test.
Once that 518 has been verified this change will be undone.
2006-10-31 01:30:42 +00:00
5aa0db8681
a small unification of the error text on failed server startups
2006-10-27 21:07:08 +00:00
ca5846cde9
catch silly mistakes better
2006-10-06 21:19:40 +00:00
e55d4fd5c1
nicer reporting of disabled tests
2006-09-13 10:48:03 +00:00
c866771cd2
Added a generic way to disable test cases when "all" is run, and added the
...
FTP 3rd party transfers to that file for now until I have them sorted out.
2006-09-13 10:16:36 +00:00
a932803eac
Invoke memanalyze from the source path and hush up about killing the FTP
...
server as part of test cases
2006-09-06 10:03:34 +00:00
973ed24dc8
1 - allow much longer time for the test FTP server to startup and get verified
...
2 - store the time it took to verify it and allow that time to be used as
%FTPTIME[23] in command lines to allow us to adjust better to slow hosts
since test 190 failed on my slow solaris machine just because it hadn't
gotten time to run all the way the test assumed all machines would reach
before the time-out elapsed.
2006-05-11 06:34:30 +00:00
975534370f
My Solaris test server was simply too slow to be able to respond within 4
...
seconds even when everything is fine! Now we allow a test server 8 seconds
to respond to still be considered ok.
2006-05-10 21:38:46 +00:00
e174d374f2
Scan for 'stunnel4' before 'stunnel' since debian have them setup this way
...
and it should break most other systems. The "funny" part is that debian
actually have a 'stunnel' setup to simulate stunnel v3 but it breaks our own
stunnel-version-detect-and-adjust-to-it system.
Added initial support for optionally running servers with fork support.
2006-04-10 13:03:20 +00:00
33df856925
If run on a curl built shared, detect this and invoke libtool for gdb
...
accordingly.
2006-03-03 14:37:44 +00:00
67a83c1b34
David Shaw finally removed all traces of Gopher and we are now officially
...
not supporting it. It hasn't been functioning for years anyway, so this is
just finally stating what already was true. And a cleanup at the same time.
2006-01-16 22:14:37 +00:00
bebf70667d
Andrew Benham fixed a race condition in the test suite that could cause the
...
test script to kill all processes in the current process group!
2006-01-13 12:16:16 +00:00
93d59520e4
If unable to get curl's version, log all failure details.
2005-12-08 11:29:47 +00:00
e06afaeb7a
Yang Tse: With last change logging directory needs to be created sooner.
2005-12-06 07:44:18 +00:00
1d8212e53a
Yang Tse: make runtests.pl more talkative when unable to find out curl's
...
version.
2005-12-05 19:23:56 +00:00
4ec55a964d
fixed the proper path to the tftpd server
2005-09-30 14:25:50 +00:00
bd5afc26bd
added TFTP and TFTP-ipv6 support
2005-09-15 20:25:02 +00:00
1e038c4bc6
valgrind version 3 renames the --logfile command line option to --log-file...
2005-08-24 10:49:57 +00:00
20005a83d2
Andrew Bushnell provided enough info for me to tell that we badly needed to
...
fix the CONNECT authentication code with multi-pass auth methods (such as
NTLM) as it didn't previously properly ignore response-bodies - in fact it
stopped reading after all response headers had been received. This could
lead to libcurl sending the next request and reading the body from the first
request as response to the second request. (I also renamed the function,
which wasn't strictly necessary but...)
The best fix would to once and for all make the CONNECT code use the
ordinary request sending/receiving code, treating it as any ordinary request
instead of the special-purpose function we have now. It should make it
better for multi-interface too. And possibly lead to less code...
Added test case 265 for this. It doesn't work as a _really_ good test case
since the test proxy is too stupid, but the test case helps when running the
debugger to verify.
2005-07-03 22:25:15 +00:00
29aafb9cea
Andres Garcia's text mode fix for the 'data' part
2005-06-03 14:06:03 +00:00
640d67c119
modified output logging, fixed the ftpslave killing
2005-05-25 12:26:20 +00:00
Yang Tse
Dan Fandrich
Daniel Stenberg