previously had a number of flaws, perhaps most notably when an application
fired up N transfers at once as then they wouldn't pipeline at all that
nicely as anyone would think... Test case 530 was also updated to take the
improved functionality into account.
The signalling of that a global DNS cache is wanted is done by setting the
option but the setting of the internal variable that it is in use must not be
done until it finally actually gets used!
NOTE and WARNING: I noticed that you can't actually switch off the global dns
cache with CURLOPT_DNS_USE_GLOBAL_CACHE but you couldn't do that previously
either and the option is very clearly and loudly documented as DO NOTE USE so
I won't bother to fix this bug now.
silly code left from when we switched to let the multi handle "hold" the dns
cache when using the multi interface... Of course this only triggered when a
certain function call returned error at the correct moment.
libcurl to seek in a given input stream. This is particularly important when
doing upload resumes when there's already a huge part of the file present
remotely. Before, and still if this callback isn't used, libcurl will read
and through away the entire file up to the point to where the resuming
begins (which of course can be a slow opereration depending on file size,
I/O bandwidth and more). This new function will also be preferred to get
used instead of the CURLOPT_IOCTLFUNCTION for seeking back in a stream when
doing multi-stage HTTP auth with POST/PUT.
code to instead introduce support for a new proxy type called
CURLPROXY_SOCKS5_HOSTNAME that is used to send the host name to the proxy
instead of IP address and there's thus no longer any need for a new
curl_easy_setopt() option.
The default SOCKS5 proxy is again back to sending the IP address to the
proxy. The new curl command line option for enabling sending host name to a
SOCKS5 proxy is now --socks5-hostname.
proxy do the host name resolving and only if --socks5ip (or
CURLOPT_SOCKS5_RESOLVE_LOCAL) is used we resolve the host name locally and
pass on the IP address only to the proxy.
the appending of the "type=" thing on FTP URLs when they are passed to a
HTTP proxy. Some proxies just don't like that appending (which is done
unconditionally in 7.17.1), and some proxies treat binary/ascii transfers
better with the appending done!
is inited at the start of the DO action. I removed the Curl_transfer_keeper
struct completely, and I had to move out a few struct members (that had to
be set before DO or used after DONE) to the UrlState struct. The SingleRequest
struct is accessed with SessionHandle->req.
One of the biggest reasons for doing this was the bunch of duplicate struct
members in HandleData and Curl_transfer_keeper since it was really messy to
keep track of two variables with the same name and basically the same purpose!
the same state struct as the host auth, so both could never be used at the
same time! I fixed it (without being able to check) to use two separate
structs to allow authentication using Negotiate on host and proxy
simultanouesly.
do_init() and do_complete() which now are called first and last in the DO
function. It simplified the flow in multi.c and the functions got more
sensible names!
out that SFTP requests didn't use persistent connections. Neither did SCP
ones. I gave the SSH code a good beating and now both SCP and SFTP should
use persistent connections fine. I also did a bunch for indent changes as
well as a bug fix for the "keyboard interactive" auth.
connectdata struct. This will in theory enable us to do persistent connections
with SCP+SFTP, but currently the state machine always (and wrongly) cleanup
everything in the 'done' action instead of in 'disconnect'. Also did a bunch
of indent fixes, if () => if() and a few other source cleanups like added
comments etc.
https://bugzilla.novell.com/show_bug.cgi?id=332917 about a HTTP redirect to
FTP that caused memory havoc. His work together with my efforts created two
fixes:
#1 - FTP::file was moved to struct ftp_conn, because is has to be dealt with
at connection cleanup, at which time the struct HandleData could be
used by another connection.
Also, the unused char *urlpath member is removed from struct FTP.
#2 - provide a Curl_reset_reqproto() function that frees
data->reqdata.proto.* on connection setup if needed (that is if the
SessionHandle was used by a different connection).
This happened because the tftp code always uncondionally did a bind()
without caring if one already had been done and then it failed. I wrote a
test case (1009) to verify this, but it is a bit error-prone since it will
have to pick a fixed local port number and since the tests are run on so
many different hosts in different situations I add it in disabled state.
CURLOPT_OPENSOCKETDATA to set a callback that allows an application to replace
the socket() call used by libcurl. It basically allows the app to change
address, protocol or whatever of the socket. (I also did some whitespace
indent/cleanups in lib/url.c which kind of hides some of these changes, sorry
for mixing those in.)
CURLOPT_SSH_HOST_PUBLIC_KEY_MD5 and the curl tool --hostpubmd5. They both make
the SCP or SFTP connection verify the remote host's md5 checksum of the public
key before doing a connect, to reduce the risk of a man-in-the-middle attack.
curl_easy_setopt() that alters how libcurl functions when following
redirects. It makes libcurl obey the RFC2616 when a 301 response is received
after a non-GET request is made. Default libcurl behaviour is to change
method to GET in the subsequent request (like it does for response code 302
- because that's what many/most browsers do), but with this CURLOPT_POST301
option enabled it will do what the spec says and do the next request using
the same method again. I.e keep POST after 301.
The curl tool got this option as --post301
Test case 1011 and 1012 were added to verify.
CURLOPT_NOBODY enabled but not CURLOPT_HEADER, libcurl wouldn't do TYPE
before it does SIZE which makes it less useful. I walked over the code and
made it do this properly, and added test case 542 to verify it.
o It looks for the NSS database first in the environment variable SSL_DIR,
then in /etc/pki/nssdb, then it initializes with no database if neither of
those exist.
o If the NSS PKCS#11 libnspsem.so driver is available then PEM files may be
loaded, including the ca-bundle. If it is not available then only
certificates already in the NSS database are used.
o Tries to detect whether a file or nickname is being passed in so the right
thing is done
o Added a bit of code to make the output more like the OpenSSL module,
including displaying the certificate information when connecting in
verbose mode
o Improved handling of certificate errors (expired, untrusted, etc)
The libnsspem.so PKCS#11 module is currently only available in Fedora
8/rawhide. Work will be done soon to upstream it. The NSS module will work
with or without it, all that changes is the source of the certificates and
keys.
passed to it with curl_easy_setopt()! Previously it has always just refered
to the data, forcing the user to keep the data around until libcurl is done
with it. That is now history and libcurl will instead clone the given
strings and keep private copies.
and CURLOPT_NEW_DIRECTORY_PERMS. These control the premissions for files
and directories created on the remote server. CURLOPT_NEW_FILE_PERMS
defaults to 0644 and CURLOPT_NEW_DIRECTORY_PERMS defaults to 0755
libssh2_sftp_shutdown() and libssh2_session_free() can now return
LIBSSH2_ERROR_EAGAIN.
* Fix the _send() and _recv() return values so non-blocking works
function that deprecates the curl_multi_socket() function. Using the new
function the application tell libcurl what action that was found in the
socket that it passes in. This gives a significant performance boost as it
allows libcurl to avoid a call to poll()/select() for every call to
curl_multi_socket*().
"case label value exceeds maximum value for type" and
"comparison is always false due to limited range of data type"
Both triggered when using a bool variable as the switch variable
in a switch statement and using enums for the case targets.
to the debug callback.
- Shmulik Regev added CURLOPT_HTTP_CONTENT_DECODING and
CURLOPT_HTTP_TRANSFER_DECODING that if set to zero will disable libcurl's
internal decoding of content or transfer encoded content. This may be
preferable in cases where you use libcurl for proxy purposes or similar. The
command line tool got a --raw option to disable both at once.
and CURLOPT_CONNECTTIMEOUT_MS that, as their names should hint, do the
timeouts with millisecond resolution instead. The only restriction to that
is the alarm() (sometimes) used to abort name resolves as that uses full
seconds. I fixed the FTP response timeout part of the patch.
Internally we now count and keep the timeouts in milliseconds but it also
means we multiply set timeouts with 1000. The effect of this is that no
timeout can be set to more than 2^31 milliseconds (on 32 bit systems), which
equals 24.86 days. We probably couldn't before either since the code did
*1000 on the timeout values on several places already.
doing an FTP transfer is removed from a multi handle before completion. The
fix also fixed the "alive counter" to be correct on "premature removal" for
all protocols.
curl that uses the new CURLOPT_FTP_SSL_CCC option in libcurl. If enabled, it
will make libcurl shutdown SSL/TLS after the authentication is done on a
FTP-SSL operation.
get confused and not acknowledge the 'no_proxy' variable properly once it
had used the proxy and you re-used the same easy handle. I made sure the
proxy name is properly stored in the connect struct rather than the
sessionhandle/easy struct.
(http://curl.haxx.se/bug/view.cgi?id=1618359) and subsequently provided a
patch for it: when downloading 2 zero byte files in a row, curl 7.16.0
enters an infinite loop, while curl 7.16.1-20061218 does one additional
unnecessary request.
Fix: During the "Major overhaul introducing http pipelining support and
shared connection cache within the multi handle." change, headerbytecount
was moved to live in the Curl_transfer_keeper structure. But that structure
is reset in the Transfer method, losing the information that we had about
the header size. This patch moves it back to the connectdata struct.
(http://curl.haxx.se/bug/view.cgi?id=1603712) which is about connections
getting cut off prematurely when --limit-rate is used. While I found no such
problems in my tests nor in my reading of the code, I found that the
--limit-rate code was severly flawed (since it was moved into the lib, since
7.15.5) when used with the easy interface and it didn't work as documented so
I reworked it somewhat and now it works for my tests.
KNOWN_BUGS #25, which happens when a proxy closes the connection when
libcurl has sent CONNECT, as part of an authentication negotiation. Starting
now, libcurl will re-connect accordingly and continue the authentication as
it should.
would crash if a bad function sequence was used when shutting down after
using the multi interface (i.e using easy_cleanup after multi_cleanup) so
precautions have been added to make sure it doesn't any more - test case 529
was added to verify.
handle that is part of a multi handle first removes the handle from the
stack.
- Added CURLOPT_SSL_SESSIONID_CACHE and --no-sessionid to disable SSL
session-ID re-use on demand since there obviously are broken servers out
there that misbehave with session-IDs used.
problem with it (SIGSEGV-style). It clearly showed that the existing
socket-state and state-difference function wasn't good enough so I rewrote
it and could then re-run Jeff's program without any crash. The previous
version clearly could miss to tell the application when a handle changed
from using one socket to using another.
While I was at it (as I could use this as a means to track this problem
down), I've now added a 'magic' number to the easy handle struct that is
inited at curl_easy_init() time and cleared at curl_easy_cleanup() time that
we can use internally to detect that an easy handle seems to be fine, or at
least not closed or freed (freeing in debug builds fill the area with 0x13
bytes but in normal builds we can of course not assume any particular data
in the freed areas).
the crash was that libcurl internally was a bit confused about who owned the
DNS cache at all times so if you created an easy handle that uses a shared
DNS cache and added that to a multi handle it would crash. Now we keep more
careful internal track of exactly what kind of DNS cache each easy handle
uses: None, Private (allocated for and used only by this single handle),
Shared (points to a cache held by a shared object), Global (points to the
global cache) or Multi (points to the cache within the multi handle that is
automatically shared between all easy handles that are added with private
caches).
CURLOPT_MAX_RECV_SPEED_LARGE that limit tha maximum rate libcurl is allowed
to send or receive data. This kind of adds the the command line tool's
option --limit-rate to the library.
The rate limiting logic in the curl app is now removed and is instead
provided by libcurl itself. Transfer rate limiting will now also work for -d
and -F, which it didn't before.
(http://curl.haxx.se/mail/lib-2006-02/0154.html) by adding the NTLM hash
function in addition to the LM one and making some other adjustments in the
order the different parts of the data block are sent in the Type-2 reply.
Inspiration for this work was taken from the Firefox NTLM implementation.
I edited the existing 21(!) NTLM test cases to run fine with these news. Due
to the fact that we now properly include the host name in the Type-2 message
the test cases now only compare parts of that chunk.
with the multi interface and multi-part formposts. The fix from February
22nd could make the Curl_done() function get called twice on the same
connection and it was not designed for that and thus tried to call free() on
an already freed memory area!
an app can use to let libcurl only connect to a remote host and then extract
the socket from libcurl. libcurl will then not attempt to do any transfer at
all after the connect is done.
curl tool with --local-port. Plain and simply set the range of ports to bind
the local end of connections to. Implemented on to popular demand.
Not extensively tested. Please let me know how it works.
(CURLOPT_FTPPORT) didn't work for ipv6-enabed curls if the IP wasn't a
"native" IP while it works fine for ipv6-disabled builds!
In the process of fixing this, I removed the support for LPRT since I can't
think of many reasons to keep doing it and asking on the mailing list didn't
reveal anyone else that could either. The code that sends EPRT and PORT is
now also a lot simpler than before (IMHO).
given subdirs, libcurl would still "remember" the full path as if it is the
current directory libcurl is in so that the next curl_easy_perform() would
get really confused if it tried the same path again - as it would not issue
any CWD commands at all, assuming it is already in the "proper" dir.
Starting now, a failed CWD command sets a flag that prevents the path to be
"remembered" after returning.
(http://curl.haxx.se/bug/view.cgi?id=1338648) which really is more of a
feature request, but anyway. It pointed out that --max-redirs did not allow
it to be set to 0, which then would return an error code on the first
Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS
set to 0, or -1 for infinity. Added test case 274 to verify.
Daniel Stenberg
Gisle Vanem
Patrick Monnerat
Dan Fandrich
Gunter Knauf
James Housley
Yang Tse
Linus Nielsen Feltzing