- Renames Curl_readwrite() to Curl_sendrecv() to reflect that it
is mainly about talking to the server, not reads or writes to the
client. Add a `nowp` parameter since the single caller already
has this.
- Curl_sendrecv() now runs all possible operations whenever it is
called and either it had been polling sockets or the 'select_bits'
are set.
POLL_IN/POLL_OUT are not always directly related to send/recv
operations. Filters like HTTP/2, QUIC or TLS may monitor reverse
directions. If a transfer does not want to send (KEEP_SEND), it
will not do so, as before. Same for receives.
- Curl_update_timer() now checks the absolute timestamp of an expiry
and the last/new timeout to determine if the application needs
to stop/start/restart its timer. This fixes edge cases where
updates did not happen as they should have.
- improved --test-event curl_easy_perform() simulation to handle
situations where no sockets are registered but a timeout is
in place.
- fixed bug in events_socket() that complained about removing
a socket that was unknown, when indeed it had removed the socket
just before, only it was the last in the list
- fixed conncache's internal handle to carry the multi instance
(where the cache has one) so that operations on the closure handle
trigger event callbacks correctly.
- fixed conncache to not POLL_REMOVE a socket twice when a conneciton
was closed.
Closes#14561
`data->id` is unique in *most* situations, but not in all. If a libcurl
application uses more than one connection cache, they will overlap. This
is a rare situations, but libcurl apps do crazy things. However, for
informative things, like tracing, `data->id` is superior, since it
assigns new ids in curl's serial curl_easy_perform() use.
Introduce `data->mid` which is a unique identifer inside one multi
instance, assigned on multi_add_handle() and cleared on
multi_remove_handle().
Use the `mid` in DoH operations and also in h2/h3 stream hashes.
Reported-by: 罗朝辉
Fixes#14414Closes#14499
- Turned them all into functions to also do asserts etc.
- The llist related structs got all their fields renamed in order to make
sure no existing code remains using direct access.
- Each list node struct now points back to the list it "lives in", so
Curl_node_remove() no longer needs the list pointer.
- Rename the node struct and some of the access functions.
- Added lots of ASSERTs to verify API being used correctly
- Fix some cases of API misuse
Add docs/LLIST.md documenting the internal linked list API.
Closes#14485
Instead of having an especially "unique" linked list handler for the
main list of easy handles within the multi handle, this now uses a
regular Curl_llist for this as well.
With this change, it is also clearer that every easy handle added to a
multi handle belongs to one and only one out of three different lists:
process - the general one for normal transfer processing
pending - queued up waiting to get a connection (MSTATE_PENDING)
msgsent - transfer completed (MSTATE_MSGSENT)
An easy handle must therefore be removed from the current list before it
gets added to another.
Closes#14474
Use these words and casing more consistently across text, comments and
one curl tool output:
AIX, ALPN, ANSI, BSD, Cygwin, Darwin, FreeBSD, GitHub, HP-UX, Linux,
macOS, MS-DOS, MSYS, MinGW, NTLM, POSIX, Solaris, UNIX, Unix, Unicode,
WINE, WebDAV, Win32, winbind, WinIDN, Windows, Windows CE, Winsock.
Mostly OS names and a few more.
Also a couple of other minor text fixups.
Closes#14360
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
When libcurl discards a connection there are two phases this may go
through: "shutdown" and "closing". If a connection is aborted, the
shutdown phase is skipped and it is closed right away.
The connection filters attached to the connection implement the phases
in their `do_shutdown()` and `do_close()` callbacks. Filters carry now a
`shutdown` flags next to `connected` to keep track of the shutdown
operation.
Filters are shut down from top to bottom. If a filter is not connected,
its shutdown is skipped. Notable filters that *do* something during
shutdown are HTTP/2 and TLS. HTTP/2 sends the GOAWAY frame. TLS sends
its close notify and expects to receive a close notify from the server.
As sends and receives may EAGAIN on the network, a shutdown is often not
successful right away and needs to poll the connection's socket(s). To
facilitate this, such connections are placed on a new shutdown list
inside the connection cache.
Since managing this list requires the cooperation of a multi handle,
only the connection cache belonging to a multi handle is used. If a
connection was in another cache when being discarded, it is removed
there and added to the multi's cache. If no multi handle is available at
that time, the connection is shutdown and closed in a one-time,
best-effort attempt.
When a multi handle is destroyed, all connection still on the shutdown
list are discarded with a final shutdown attempt and close. In curl
debug builds, the environment variable `CURL_GRACEFUL_SHUTDOWN` can be
set to make this graceful with a timeout in milliseconds given by the
variable.
The shutdown list is limited to the max number of connections configured
for a multi cache. Set via CURLMOPT_MAX_TOTAL_CONNECTIONS. When the
limit is reached, the oldest connection on the shutdown list is
discarded.
- In multi_wait() and multi_waitfds(), collect all connection caches
involved (each transfer might carry its own) into a temporary list.
Let each connection cache on the list contribute sockets and
POLLIN/OUT events it's connections are waiting for.
- in multi_perform() collect the connection caches the same way and let
them peform their maintenance. This will make another non-blocking
attempt to shutdown all connections on its shutdown list.
- for event based multis (multi->socket_cb set), add the sockets and
their poll events via the callback. When `multi_socket()` is invoked
for a socket not known by an active transfer, forward this to the
multi's cache for processing. On closing a connection, remove its
socket(s) via the callback.
TLS connection filters MUST NOT send close nofity messages in their
`do_close()` implementation. The reason is that a TLS close notify
signals a success. When a connection is aborted and skips its shutdown
phase, the server needs to see a missing close notify to detect
something has gone wrong.
A graceful shutdown of FTP's data connection is performed implicitly
before regarding the upload/download as complete and continuing on the
control connection. For FTP without TLS, there is just the socket close
happening. But with TLS, the sent/received close notify signals that the
transfer is complete and healthy. Servers like `vsftpd` verify that and
reject uploads without a TLS close notify.
- added test_19_* for shutdown related tests
- test_19_01 and test_19_02 test for TCP RST packets
which happen without a graceful shutdown and should
no longer appear otherwise.
- add test_19_03 for handling shutdowns by the server
- add test_19_04 for handling shutdowns by curl
- add test_19_05 for event based shutdowny by server
- add test_30_06/07 and test_31_06/07 for shutdown checks
on FTP up- and downloads.
Closes#13976
Currently, we use `pipe` for `wakeup_create`, which requires ***two***
file descriptors. Furthermore, given its complexity inside, `pipe` is a
bit heavyweight for just a simple event wait/notify mechanism.
`eventfd` would be a more suitable solution for this kind of scenario,
kernel also advocates for developers to use `eventfd` instead of `pipe`
in some simple use cases:
Applications can use an eventfd file descriptor instead of a pipe
(see pipe(2) in all cases where a pipe is used simply to signal
events. The kernel overhead of an eventfd file descriptor is much
lower than that of a pipe, and only one file descriptor is required
(versus the two required for a pipe).
This change adds the new backend of `eventfd` for `wakeup_create` and
uses it where available, eliminating the overhead of `pipe`. Also, it
optimizes the `wakeup_create` to eliminate the system calls that make
file descriptors non-blocking by moving the logic of setting
non-blocking flags on file descriptors to `socketpair.c` and using
`SOCK_NONBLOCK` for `socketpair(2)`, `EFD_NONBLOCK` for `eventfd(2)`.
Ref:
https://man7.org/linux/man-pages/man7/pipe.7.htmlhttps://man7.org/linux/man-pages/man2/eventfd.2.htmlhttps://man7.org/linux/man-pages/man2/socketpair.2.htmlhttps://www.gnu.org/software/gnulib/manual/html_node/eventfd.htmlCloses#13874
- add `Curl_hash_add2()` that passes a destructor function for
the element added. Call element destructor instead of hash
destructor if present.
- multi: add `proto_hash` for protocol related information,
remove `struct multi_ssl_backend_data`.
- openssl: use multi->proto_hash to keep x509 shared store
- schannel: use multi->proto_hash to keep x509 shared store
- vtls: remove Curl_free_multi_ssl_backend_data() and its
equivalents in the TLS backends
Closes#13345
Since we can go to the CONNECT state from PENDING, potentially multiple
times for a single transfer, this change introdues a SETUP state that
happens before CONNECT when doing a new transfer.
Now, doing a redirect on a handle goes back to SETUP (not CONNECT like
before) and we initilize the connect timeout etc in SETUP. Previously,
we would do it in CONNECT but that would make it unreliable in cases
where a transfer goes in and out between CONNECT and PENDING multiple
times.
SETUP is transient, so the handle never actually stays in that state.
Additionally: take care of timeouts of PENDING transfers in
curl_multi_perform()
Ref: #13227Closes#13371
- Move all the "upload_done" handling to request.c
- add possibility to abort sending of a request
- add `Curl_req_done_sending()` for checks
- transfer.c: readwrite_upload() now clean
- removing data->state.ulbuf and data->req.upload_fromhere
- as well as data->req.upload_present
- set data->req.upload_done on having read all from
the client and completely flushed the send buffer
- tftp, remove setting of data->req.upload_fromhere
- serves no purpose as `upload_present` is not set
and the data itself is directly `sendto()` anyway
- smtp, make upload EOB conversion a client reader
- xfer_ulbuf addition
- add xfer_ulbuf for borrowing, similar to xfer_buf
- use in file upload
- use in c-hyper body sending
- h1-proxy, remove init of data->state.uilbuf that is never used
- smb, add own send_buf instead of using data->state.ulbuf
Closes#13010
- can be borrowed by transfer during recv-write operation
- needs to be released before borrowing again
- adjustis size to `data->set.buffer_size`
- used in transfer.c readwrite_data()
Closes#12805
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
'data->multi' is kept a pointer to the multi handle as long as the easy
handle is actually part of it even when the handle is moved to the
pending/msgsent lists. It needs to know which multi handle it belongs
to, if for example curl_easy_cleanup() is called before the handle is
removed from the multi handle.
Alll 'data->multi' pointers of handles still part of the multi handle
gets cleared by curl_multi_cleanup() which "orphans" all previously
attached easy handles.
This is take 2. The first version was reverted for the 8.0.1 release.
Assisted-by: Stefan Eissing
Closes#10801
As they are not driving transfers or any socket activity, the main loop
does not need to iterate over these handles. A performance improvement.
They are instead only held in their own separate lists.
Assisted-by: Stefan Eissing
Ref: #10743Closes#10762
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
The check may take many milliseconds, so now it is performed once the
value is first needed. Also, this change makes sure that the value is
not used if the resolve is set to be IPv4-only.
Closes#9553
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
The callbacks were partially documented to support this. Now the
behavior is documented and returning error from either of these
callbacks will effectively kill all currently ongoing transfers.
Added test 530 to verify
Reported-by: Marcelo Juchem
Fixes#8083Closes#8089
Avoid the race condition risk by instead storing the "seeded" flag in
the multi handle. Modern OpenSSL versions handle the seeding itself so
doing the seeding once per multi-handle instead of once per process is
less of an issue.
Reported-by: Gerrit Renker
Fixes#7296Closes#7306
This reverts commit 2260e0ebe6,
also restoring previous follow up changes which were reverted.
Authored-by: rcombs on github
Authored-by: Marc Hörsken
Reviewed-by: Jay Satiro
Reviewed-by: Marcel Raad
Restores #5634
Reverts #6281
Part of #6245
While working on documenting the states it dawned on me that step one is
to use more descriptive names on the states. This also changes prefix on
the states to make them shorter in the source.
State names NOT ending with *ing are transitional ones.
Closes#6612
By making the `magic` identifier the same size and at the same place
within the structs (easy, multi, share), libcurl will be able to more
reliably detect and safely error out if an application passes in the
wrong handle to APIs. Easier to detect and less likely to cause crashes
if done.
Such mixups can't be detected at compile-time due to them being
typedefed void pointers - unless `CURL_STRICTER` is defined.
Closes#6484
This reverts commit d2a7d7c185.
This commit also reverts the subsequent follow-ups to that commit, which
were all done within windows #ifdefs that are removed in this
change. Marc helped me verify this.
Fixes#6146Closes#6281
This avoids using a pair of TCP ports to provide wakeup functionality
for every multi instance on Windows, where socketpair() is emulated
using a TCP socket on loopback which could in turn lead to socket
resource exhaustion.
A previous version of this patch failed to account for how in WinSock,
FD_WRITE is set only once when writing becomes possible and not again
until after a send has failed due to the buffer filling. This contrasts
to how FD_READ and FD_OOB continue to be set until the conditions they
refer to no longer apply. This meant that if a user wrote some data to
a socket, but not enough data to completely fill its send buffer, then
waited on that socket to become writable, we'd erroneously stall until
their configured timeout rather than returning immediately.
This version of the patch addresses that issue by checking each socket
we're waiting on to become writable with select() before the wait, and
zeroing the timeout if it's already writable.
Assisted-by: Marc Hörsken
Reviewed-by: Marcel Raad
Reviewed-by: Daniel Stenberg
Tested-by: Gergely Nagy
Tested-by: Rasmus Melchior Jacobsen
Tested-by: Tomas Berger
Replaces #5397
Reverts #5632Closes#5634
Since 09b9fc900 (multi: remove 'Curl_one_easy' struct, phase 1,
2013-08-02), the easy handle list is not circular but ends with
->next pointing to NULL.
Reported-by: Masaya Suzuki <masayasuzuki@google.com>
Closes#5737
This avoids using a pair of TCP ports to provide wakeup functionality
for every multi instance on Windows, where socketpair() is emulated
using a TCP socket on loopback which could in turn lead to socket
resource exhaustion.
Reviewed-by: Gergely Nagy
Reviewed-by: Marc Hörsken
Closes#5397
Previously it was stored in a global state which contributed to
curl_global_init's thread unsafety. This boolean is now instead figured
out in curl_multi_init() and stored in the multi handle. Less effective,
but thread safe.
Closes#4851
A regression made the code use 'multiplexed' as a boolean instead of the
counter it is intended to be. This made curl try to "over-populate"
connections with new streams.
This regression came with 41fcdf71a1, shipped in curl 7.65.0.
Also, respect the CURLMOPT_MAX_CONCURRENT_STREAMS value in the same
check.
Reported-by: Kunal Ekawde
Fixes#4779Closes#4784
This commit adds curl_multi_wakeup() which was previously in the TODO
list under the curl_multi_unblock name.
On some platforms and with some configurations this feature might not be
available or can fail, in these cases a new error code
(CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup().
Fixes#4418Closes#4608
The latest psl is cached in the multi or share handle. It is refreshed
before use after 72 hours.
New share lock CURL_LOCK_DATA_PSL controls the psl cache sharing.
If the latest psl is not available, the builtin psl is used.
Reported-by: Yaakov Selkowitz
Fixes#2553Closes#2601
Stefan Eissing
Daniel Stenberg
Viktor Szakats
Andy Pan
Andrew
Michael Drake
max.mehl
Marc Hoersken
Jay Satiro
rcombs
Jonathan Nieder
Gergely Nagy
Kunal Ekawde
Patrick Monnerat
Björn Stenberg