6e61939382
GnuTLS support added. There's now a "generic" SSL layer that we use all over
...
internally, with code provided by sslgen.c. All SSL-layer-specific code is
then written in ssluse.c (for OpenSSL) and gtls.c (for GnuTLS).
As far as possible, internals should not need to know what SSL layer that is
in use. Building with GnuTLS currently makes two test cases fail.
TODO.gnutls contains a few known outstanding issues for the GnuTLS support.
GnuTLS support is enabled with configure --with-gnutls
2005-04-07 15:27:13 +00:00
74816fed6c
Hardeep Singh reported a problem doing HTTP POST with Digest. (It was actually
...
also affecting NTLM and Negotiate.) It turned out that if the server responded
with 100 Continue before the initial 401 response, libcurl didn't take care of
the response properly. Test case 245 and 246 added to verify this.
2005-04-03 22:46:25 +00:00
158588640a
Don't close the connection if we're in a known negotiation mode and we won't
...
send any data anyway. Probably the bug Tom Moers noticed.
2005-03-29 12:28:25 +00:00
8a076d1dba
Based on Augustus Saunders' comments and findings, the HTTP output auth
...
function was fixed to use the proper proxy authentication when multiple ones
were added as accepted. test 239 and test 243 were added to repeat the
problems and verify the fixes.
2005-03-28 22:19:31 +00:00
d1d35ba85f
Christopher R. Palmer made it possible to build libcurl with the
...
USE_WINDOWS_SSPI on Windows, and then libcurl will be built to use the native
way to do NTLM. SSPI also allows libcurl to pass on the current user and its
password in the request.
2005-03-10 23:15:29 +00:00
5ba188ab2d
Ralph Mitchell reported a flaw when you used a proxy with auth, and you
...
requested data from a host and then followed a redirect to another
host. libcurl then didn't use the proxy-auth properly in the second request,
due to the host-only check for original host name wrongly being extended to
the proxy auth as well. Added test case 233 to verify the flaw and that the
fix removed the problem.
2005-02-18 23:53:07 +00:00
ac022b2e30
Christopher R. Palmer reported a problem with HTTP-POSTing using "anyauth"
...
that picks NTLM. Thanks to David Byron letting me test NTLM against his
servers, I could quickly repeat and fix the problem. It turned out to be:
When libcurl POSTs without knowing/using an authentication and it gets back a
list of types from which it picks NTLM, it needs to either continue sending
its data if it keeps the connection alive, or not send the data but close the
connection. Then do the first step in the NTLM auth. libcurl didn't send the
data nor close the connection but simply read the response-body and then sent
the first negotiation step. Which then failed miserably of course. The fixed
version forces a connection if there is more than 2000 bytes left to send.
2005-02-16 14:31:23 +00:00
e7cefd684b
Removed all uses of strftime() since it uses the localised version of the
...
week day names and month names and servers don't like that.
2005-02-11 00:03:49 +00:00
6a2e21ec8c
FTP code turned into state machine. Not completely yet, but a good start.
...
The tag 'before_ftp_statemachine' was set just before this commit in case
of future need.
2005-02-09 13:06:40 +00:00
7b23eff9cf
Preserve previous status in Curl_http_done().
2005-02-06 12:43:40 +00:00
7e42cb61f7
FTP third transfer support overhaul. See CHANGES for details.
2005-01-21 09:32:32 +00:00
494c40fd98
NULL the fp pointer after it has been fclosed()
2004-12-16 13:55:19 +00:00
d3b414724b
Dinar in bug report #1086121 , found a file handle leak when a multipart
...
formpost (including a file upload part) was aborted before the whole file was
sent.
2004-12-16 09:52:36 +00:00
c0c885a1f3
don't try the rewind if no http struct is allocated yet
2004-12-10 14:45:35 +00:00
ac269a8f68
Dan Fandrich added the --disable-cookies option to configure to build
...
libcurl without cookie support. This is mainly useful if you want to build a
minimalistic libcurl with no cookies support at all. Like for embedded
systems or similar.
2004-12-05 23:59:32 +00:00
6ac9e67bd7
made the intended one hour default timeout in the CONNECT loop actually work
2004-12-02 23:30:13 +00:00
8726a6b6ed
comment cleanup
2004-12-02 22:52:14 +00:00
15360e5e51
prevent an initial "(nil)" to get sent in the initial request when doing
...
CONNECT to a proxy with digest
2004-12-02 17:08:37 +00:00
3e1caa6185
HTTP "auth done right". See lib/README.httpauth
2004-11-24 16:11:35 +00:00
1a05a90f1c
David Phillips' FD_SETSIZE fix
2004-11-19 08:52:33 +00:00
94043b1150
Dan Fandrich added the --disable-crypto-auth option to configure to allow
...
libcurl to build without Digest support. (I figure it should also explicitly
disable Negotiate and NTLM.)
2004-11-12 09:18:14 +00:00
59c063dfd3
Fix behaviour when passing NULL to CURLOPT_POSTFIELDS and CURLOPT_HTTPPOST.
2004-11-11 23:11:04 +00:00
6b49fd7483
Tim Sneddon's VMS fix for huge HTTP POSTs
2004-11-05 14:43:35 +00:00
24d47a6e07
Paul Nolan fix to make libcurl build nicely on Windows CE
2004-11-02 10:12:22 +00:00
a00e7f0f5e
Tomas Pospisek filed bug report #1053287 that proved -C - and --fail on a
...
file that was already completely downloaded caused an error, while it
doesn't if you don't use --fail! I added test case 194 to verify the fix.
Grrr. CURLOPT_FAILONERROR is now added to the list stuff to remove in
libcurl v8 due to all the kludges needed to support it.
2004-10-25 11:28:40 +00:00
39af394a1c
removed tabs and trailing whitespace from source
2004-10-06 07:50:18 +00:00
b8b56248bd
- Bug report #1025986 . When following a Location: with a custom Host: header
...
replacement, curl only replaced the Host: header on the initial request
and didn't replace it on the following ones. This resulted in requests with
two Host: headers.
Now, curl checks if the location is on the same host as the initial request
and then continues to replace the Host: header. And when it moves to another
host, it doesn't replace the Host: header but it also doesn't make the
second Host: header get used in the request.
This change is verified by the two new test cases 184 and 185.
2004-09-10 20:58:51 +00:00
723bfe42e7
Roman Koifman pointed out that libcurl send Expect: 100-continue on POSTs and
...
PUTs even when told to use HTTP 1.0, which is not correct.
2004-08-23 12:34:55 +00:00
2646af106b
allow a custom "Accept-Encoding:" header override the internally set one
...
that gets set with CURLOPT_ENCODING
2004-08-16 13:25:30 +00:00
45197b188e
Roland Krikava's cookies over proxy fix.
2004-08-16 07:24:25 +00:00
a7bed4fc7c
Fixes Brian Akins' reported problems with duplicate Host: headers on re-used
...
connections.
2004-07-28 21:13:29 +00:00
fcfd4bef2d
typecast to prevent picky compiler warning
2004-07-01 07:30:19 +00:00
e35187741b
spellfixed comments
2004-07-01 06:08:06 +00:00
0031d76f2a
use snprintf() to be on the safe side
2004-06-24 10:43:22 +00:00
cd7a0f829f
When doing auth negotiations or authprobing, we only consider HTTP code
...
<300 to be good.
2004-06-19 10:10:24 +00:00
d4b577114b
With David Byron's test server I could repeat his problem and make sure that
...
POSTing over HTTPS:// with NTLM works fine now. There was a general problem
with multi-pass authentication with non-GET operations with CONNECT.
2004-06-18 06:15:26 +00:00
80a1e972fc
Fix the auth code to enable us to i.e set DIGEST and then find out that the
...
server doesn't require any auth at all and then we just continue nicely. We
now have an extra bit in the connection struct named 'authprobe' that is TRUE
when doing pure "HTTP authentication probing".
2004-06-15 08:45:22 +00:00
4cd96483f6
moved default: in a switch case to prevent compiler warning that 'request'
...
might be used uninitialized
2004-06-13 09:08:38 +00:00
fce9d51122
updated a comment
2004-06-03 14:42:08 +00:00
ea81dd9e2e
Alexander Krasnostavsky's FTP third party transfer (proxy) support
2004-06-03 11:41:05 +00:00
2c43d64302
Added a new 'bit' in the connect struct named 'tunnel_proxy' that is set
...
if a connection is tunneled through a proxy. A tunnel is done with CONNECT,
either when using HTTPS or FTPS, or if explicitly enabled by the app.
2004-05-26 08:54:36 +00:00
59f904d8de
Robert D. Young reported that CURLOPT_COOKIEFILE and CURLOPT_COOKIE could
...
not be used both in one request. Fixed it and added test case 172 to verify.
2004-05-24 07:13:48 +00:00
d60c22572b
Curl_done() and the protocol-specific conn->curl_done() functions now all
...
take a CURLcode as a second argument, that is non-zero when Curl_done()
is called after an error was returned from Curl_do() (or similar).
2004-05-12 12:06:39 +00:00
bbafb2eb27
curl_global_init_mem() allows the memory functions to be replaced.
...
memory.h is included everywhere for this.
2004-05-11 11:30:23 +00:00
63f97b38eb
Moved the fetching of the list of matching cookies to make it easier to free
...
that list in case something goes wrong in the function and we must bail out.
Courtesy of the torture testing.
2004-05-10 14:22:20 +00:00
1f798affb9
typo
2004-05-10 10:52:29 +00:00
71fdc063bd
better detection for when add_buffer() returns failure, and return when that
...
happens
2004-05-10 10:49:35 +00:00
afc1ed60f7
initiate variables properly to default to no auth for server and proxy
2004-05-05 13:00:03 +00:00
76ff92b811
bail out when an add_buffer() function returns failure
2004-05-04 14:27:07 +00:00
08d1da106e
check malloc() return code
2004-05-04 13:39:24 +00:00
fc6eff13b5
General HTTP authentication cleanup and fixes
2004-05-04 07:52:53 +00:00
59907ebc0e
fixed the host/proxy name issue when re-using a connection and made IDN names
...
work when using proxy by converting the IDN-name to the ACE-encoded version
before the request-URL is passed to the proxy.
2004-04-29 13:41:48 +00:00
4b9f8e766d
Made host name and proxy name get stored in a 'struct hostname' and set
...
all things up to work with encoded host names internally, as well as keeping
'display names' to show in debug messages. IDN resolves work for me now using
ipv6, ipv4 and ares resolving. Even cookies on IDN sites seem to do right.
2004-04-27 13:56:23 +00:00
f5042cce34
IDN adjustments and host cleanups by Gisle
2004-04-26 14:03:25 +00:00
70e2aadc18
Replaced Curl_FormReadOneLine with Curl_formpostheader as that is the only use
...
for it. It saves one extra copy of the header.
I also added comments for several functions in formdata.c
2004-04-23 10:37:52 +00:00
550862f41a
missing brace
2004-04-22 21:27:32 +00:00
2ff30d067c
- David Byron found and fixed a small bug with the --fail and authentication
...
stuff added a few weeks ago. Turns out that if you specify --proxy-ntlm and
communicate with a proxy that requires basic authentication, the proxy
properly returns a 407, but the failure detection code doesn't realize it
should give up, so curl returns with exit code 0. Test case 162 verifies
this.
2004-04-22 20:07:41 +00:00
33cb93ad0b
Added comments
2004-04-22 12:35:45 +00:00
b7a7600465
Cleaned up hostname/name/gname and path/ppath confusion. Removed the fixed-
...
length limit of the hostname part of the URL.
2004-04-20 07:53:24 +00:00
ee7d1d0701
remove an long time #defined struct member and use the actual "real" name
...
instead to make it easier to find/read
2004-04-13 07:37:28 +00:00
72b1144b8c
getting only a 100 Continue response and nothing else, when talking HTTP,
...
is now treated as an error by libcurl
2004-04-07 14:27:54 +00:00
8ed44e8dfb
New authentication code added, particularly noticable when doing POST or PUT
...
with Digest or NTLM. libcurl will now use HEAD to negotiate the authentication
and when done perform the requested POST.
2004-04-06 15:14:10 +00:00
7ea837a18c
adjusted to the new dns cache function to hide more hostip internals
2004-03-30 13:02:31 +00:00
76f23acfa1
if 0'ed out a code section that uses __FUNCTION__ etc, used for debugging
...
the new "fail with auth" code
2004-03-30 08:21:09 +00:00
8e92600ddd
David Byron made CURLOPT_FAILONERROR work with authentications such as NTLM
...
or Digest.
2004-03-30 06:40:01 +00:00
f788f988ea
fix signed and unsigned warnings
2004-03-14 18:15:04 +00:00
d04ffd258b
postsize is off_t now, so we typecase it to int before doing normal printf
...
with it (knowing it won't be larger than what fits in an int)
2004-03-13 17:11:42 +00:00
24cfa7f1bb
the postsize is an off_t so use the proper printf format to output the
...
content-length when doing multipart posts
2004-03-13 17:03:17 +00:00
94a1d09ac7
more variable type fixing for the huge posts
2004-03-12 14:22:16 +00:00
4ad68ec305
more variable type fixes for the large POST support
2004-03-12 13:06:01 +00:00
ef776ab893
Made the 'postsize' variable an off_t type to be able to hold large file
...
sizes if desired
2004-03-12 12:07:01 +00:00
0d1fc73f21
Use more curl_off_t variables when doing the progress meter calculations and
...
argument passing and try to convert to double only when providing data to the
external world.
2004-03-10 16:20:33 +00:00
7225b14002
curl_socket_t mistakes cleanup
2004-03-10 16:01:47 +00:00
cf004cbc7e
keep the number of bytes read in a size_t variable
2004-03-10 09:44:42 +00:00
ce5805a955
Use curl_socket_t instead of int for holding sockets. The typedefs and
...
defines are in setup.h.
2004-03-09 22:52:50 +00:00
7b2869338d
explicit typecast to visualize that we really want the result of the
...
operation as a size_t
2004-03-09 21:39:50 +00:00
498666bdc3
issue 12 fix
2004-03-05 12:54:18 +00:00
353f764119
Yet another curl_off_t printf format attempt, we now exclude the %-letter from
...
FORMAT_OFF_T to allow additional options to get specified, like with '"%5"
FORMAT_OFF_T'.
2004-03-02 09:31:18 +00:00
7ab3b5b3bb
use FORMAT_OFF_T instead of CURL_FORMAT_OFF_T to reduce the complexity of
...
having to redef that name
2004-03-02 07:25:39 +00:00
cb72a80fe0
Use CURL_FORMAT_OFF_T for printf()inf curl_off_t variables.
2004-03-01 16:28:00 +00:00
d571064b65
Clear up int/long/size_t/ssize_t usage a bit
2004-02-26 13:40:43 +00:00
e1b5e15431
More size_t cleanups in the base64 functions.
2004-02-23 08:22:43 +00:00
93e32e6f62
Modified the default HTTP Accept: header to only be Accept: */*
2004-02-09 12:46:41 +00:00
f56d753507
A custom Host: header is only considered if the request is not made by
...
following a location. After discussions with Tim Baker.
2004-02-06 08:11:58 +00:00
cc90a235f4
if an empty 'transfer-encoding:' header is provided, we switch off the
...
chunky coding of uploads
2004-02-05 15:50:16 +00:00
b84eaff1d5
set the 'retry' bit to TRUE when the connection is about to be retried,
...
this allows the HTTP code to *not* return a failure just because no data
has been received from the server
2004-02-02 14:49:54 +00:00
4d17d6876e
Dan Fandrich's cleanup patch to make pedantic compiler options cause less
...
warnings. Minor edits by me.
2004-01-29 13:56:45 +00:00
958987c214
Chunked-transfers should have an additional CRLF after the final 0 CRLF
...
sequence.
2004-01-28 17:07:22 +00:00
dc932f739a
CONNECT response headers are now passed back as "regular" headers
2004-01-27 12:54:22 +00:00
b791e158f0
use curl_off_t instead of off_t!
2004-01-22 12:45:50 +00:00
44031f32a1
added one assert and a few comments describing how the auth stuff works
2004-01-09 14:03:06 +00:00
053f6c85ef
updated year in the copyright string
2004-01-07 09:19:33 +00:00
b60e0fa97e
David J Meyer's large file support.
2004-01-05 22:29:29 +00:00
1d977b7848
When basic is the only auth wanted (which it is by default), the auth phase
...
is always considered done immediately as Basic needs to extra passes.
This fix corrects bug report #848371 .
2003-11-25 09:05:15 +00:00
45614d54c6
allow the end-of-headers from a proxy response to CONNECT end with a CRCR
...
as well as a CRLF
2003-11-24 16:17:55 +00:00
1e98727c55
FTPS support added as RFC2228 and the murray-ftp-auth-ssl draft describe it
2003-11-24 07:15:37 +00:00
f481b3e1dc
bail out properly on a 407 when we can't authenticate basic, bug report
...
#845247
2003-11-20 09:53:42 +00:00
a717afc3a7
gmtime() really can't even return NULL, can it?
2003-10-31 21:43:22 +00:00
7247041e21
Improved checks for bad memory situations and proper behaviour when we
...
run out of memory.
2003-10-24 12:58:29 +00:00
d1c08e1d85
conn->user and conn->passwd will now always be set to point to something.
...
If not user or password is set, they will point to a "" string.
2003-10-21 06:34:15 +00:00
b83c7ade10
allow no user and password for proxy too, Basic
2003-10-20 20:32:08 +00:00
7d6584e140
allow no user and no passwd when doing basic auth
2003-10-20 20:30:40 +00:00
9df8f9a63d
builds warning-free with -Wshadow now
2003-10-18 20:35:03 +00:00
f0089b6291
compiler warning fix
2003-10-18 20:14:21 +00:00
9935d33b8e
make empty names look fine in verbose output
2003-10-17 09:29:30 +00:00
260c353577
show info text (verbose) about auth type and user name in use
2003-10-17 07:05:26 +00:00
749f5387c1
Gisle Vanem's IPv6-on-Windows patch applied!
2003-10-14 12:00:45 +00:00
b61c25af45
make sure that a regular POST using the read callback works
2003-10-07 14:39:32 +00:00
780652e5b6
Vincent Bronner pointed out that if you set CURLOPT_COOKIE to NULL, it still
...
sends off the previously set cookie. This also concerns CURLOPT_REFERER.
This fix should stop this.
2003-10-04 15:48:15 +00:00
09ccfcdcd4
Markus Moeller's SPNEGO patch applied, with my edits, additions and minor
...
cleanups.
2003-09-19 12:56:22 +00:00
58b1437cae
When we issue a HTTP request, first make sure if the authentication phase
...
is over or not, as if it isn't we shall not begin any PUT or POST operation.
This cures bug report #805853 , and test case 88 verifies it!
2003-09-15 21:11:22 +00:00
fd42247cac
Tim Bartley's patch that makes the GSSNEGOTIATE option work for Microsoft's
...
"Negotiate" authentication as well.
2003-09-11 22:21:11 +00:00
f2057eb744
ah, this change broke multiple test cases
2003-09-04 13:07:09 +00:00
2956fe97a0
Jrg pointed out that I did this fix wrongly, now authwant is cleared
...
properly if no auth is available
2003-09-04 11:34:09 +00:00
1f9b0e70ab
Based on Joerg Mueller-Tolk's patch, this introduces support for
...
CURLINFO_HTTPAUTH_AVAIL and CURLINFO_PROXYAUTH_AVAIL
2003-09-04 10:55:20 +00:00
8fae12b2f1
1. store the httpproxycode in the loop after it is parsed
...
2. made Curl_http_auth_act() reset 'authavail' unconditionally
2003-09-04 10:18:12 +00:00
7410210f19
avoid proxy (and other) auth if no user+password is given
2003-09-04 10:08:53 +00:00
52ceab5e41
Re-arranged code to make the proxy-CONNECT loop able to do some of the
...
authentication negotiations needed for NTLM, Digest etc.
2003-09-03 21:51:28 +00:00
a3c1248214
Bugfix from Serge Semashko that fixes a bug introduced when we applied his
...
NTLM patch. Test case 84 and 85 verify this.
2003-08-12 08:20:16 +00:00
27619fc450
Added support for CURLINFO_HTTP_CONNECTCODE
2003-08-11 23:15:41 +00:00
7a19923afa
Serge Semashko added CURLOPT_PROXYAUTH support, and now NTLM for proxies
...
work.
2003-08-11 11:47:45 +00:00
2dd1518d63
support sending off cookies without contents
2003-08-11 09:55:48 +00:00
c704d1545c
include "share.h" for the cookie sharing
2003-08-06 15:26:24 +00:00
41ae97e710
Dirk Manske's patch that introduces cookie support to the share interface.
2003-08-04 15:02:42 +00:00
db9f87f697
When proxy authentication is used in a CONNECT request (as used for all SSL
...
connects and otherwise enforced tunnel-thru-proxy requests), the same
authentication header is also wrongly sent to the remote host.
The name and password can then be captured by an evil host and possibly get
used for malicious purposes.
2003-08-02 23:36:35 +00:00
48a580e609
clear http->send_buffer when we have freed the memory it pointed to
2003-07-28 10:21:57 +00:00
f0278ca114
Removed #include <sys/resource.h>, as pointed out by Henry Bland we don't
...
need it.
2003-07-25 08:30:58 +00:00
071c95128e
moved the proxyuser and proxypasswd fields from the sessionhandle to the
...
connectdata to work as expected
2003-07-21 13:16:30 +00:00
52b631fade
Access the user and passwd fields from the connectdata struct now instead
...
of the sessionhandle struct, as that was not good.
2003-07-19 23:56:33 +00:00
45fc760985
Peter Sylvester's patch was applied that introduces the following:
...
CURLOPT_SSL_CTX_FUNCTION to set a callback that gets called with the
OpenSSL's ssl_ctx pointer passed in and allow a callback to act on it. If
anything but CURLE_OK is returned, that will also be returned by libcurl
all the way back. If this function changes the CURLOPT_URL, libcurl will
detect this and instead go use the new URL.
CURLOPT_SSL_CTX_DATA is a pointer you set to get passed to the callback set
with CURLOPT_SSL_CTX_FUNCTION.
2003-07-04 16:29:23 +00:00
12859e345f
major adjustments to the new authentication support
2003-06-26 11:24:55 +00:00
ecf32c964a
CURLHTTP* renamed to CURLAUTH* and NEGOTIATE is now GSSNEGOTIATE as there's
...
a "plain" Negotiate as well.
2003-06-12 17:34:27 +00:00
73c5f24fa4
Initial take at NTLM authentication. It doesn't really work at this point
...
but the infrastructure is there.
2003-06-11 13:38:55 +00:00
e56ae1426c
Daniel Kouril's patch that adds HTTP negotiation support to libcurl was
...
added.
2003-06-10 12:22:19 +00:00
8d30d34e0c
When doing very big GET requests over HTTPS, we need to add some extra
...
funky logic in order to make re-tries work fine with OpenSSL. This corrects
the problem David Orrell noticed.
2003-06-06 14:58:26 +00:00
4e410111db
Posting static data using POST and chunked encoded now also appends the
...
data to the initial request buffer, if the total post data is less than
100K.
2003-05-28 07:54:33 +00:00
5bd8d60e41
Rudy Koento experienced problems with curl's recent habit of POSTing data in
...
two separate send() calls, first the headers and then the data. I've now made
a fix that for static and known content that isn't to be chunked-encoded,
everything is now sent in one single system call again. This is also better
for network performance reasons.
2003-05-27 08:33:08 +00:00
90b0f38316
Another socks5-fix. Make sure that when we use a socks-proxy, it is not the
...
same as using a httpproxy so we must make sure to better check for http
proxies before we do HTTP proxy stuff. This included authorization and
URI usage in the request etc.
2003-05-27 06:28:25 +00:00
01108e3a63
warning-free is better
2003-05-22 22:45:38 +00:00
a39d77227f
Better Digest stuff
2003-05-22 22:39:38 +00:00
334d78cd18
Initial Digest support. At least partly working.
2003-05-22 16:09:54 +00:00
940707ad66
incoming proxy headers shall be sent to the debug function has HEADERs not
...
DATA
2003-05-12 12:29:00 +00:00
1752d80915
If there is a custom Host: header specified, we use that host name to
...
extract the correct set of cookies to send. This functionality is verified
by test case 62.
2003-05-02 09:13:19 +00:00
bea02ddebe
stop parsing Host: host names at colons too
2003-04-30 17:12:29 +00:00
7c96c5a39b
extract host name from custom Host: headers to use for cookies
2003-04-30 17:04:53 +00:00
25f611ca42
Guillaume Cottenceau's patch that adds CURLOPT_UNRESTRICTED_AUTH that
...
disables the host name check in the FOLLOWLOCATION code. With that option
set, libcurl will send user+password to all hosts.
2003-03-31 04:41:05 +00:00
d349eb3d43
Juan F. Codagnone pointed out a missing thing from the march 2 fix
2003-03-16 16:15:24 +00:00
17962b3d2e
Added typecast to please the MSVC compiler.
2003-03-03 06:45:27 +00:00
3242ea5f66
Init postdata properly before issuing a request, so that there isn't any
...
lingering POST-stuff that confuses GET requests. Juan F. Codagnone reported
this problem in bug report #653859 .
2003-03-02 17:43:42 +00:00
a6206a3aef
Fixes to bring back the the "Expect: 100-continue" functionality. If the
...
header is used, we must wait for a 100-code (or timeout), before we send the
data. The timeout is merely 1000 ms at this point. We may have reason to set
a longer timeout in the future.
2003-02-24 16:53:53 +00:00
a7c72b7abf
removed the local variables for emacs and vim, use the new sample.emacs
...
way for emacs, and vim users should provide a similar non-polluting style
2003-01-29 10:14:20 +00:00
f26a338a54
copyright year update in the source header
2003-01-16 21:08:12 +00:00
db6ff224f8
The initial HTTP request can now be sent in multiple parts, as part of the
...
regular transfer process. This required some new tweaks, like for example
we need to be able to tell the tranfer loop to not chunky-encode uploads
while we're transferring the rest of the request...
2002-12-10 13:10:00 +00:00
49f75ee8ce
A normal POST now provides data to the main transfer loop via the usual
...
read callback, and thus won't put a lot of stress on the request sending
code (which currently does an ugly loop).
2002-12-09 16:05:57 +00:00
4bcc866c52
The fread() callback pointer and associated pointer is now stored in the
...
connectdata struct instead, and is no longer modified within the 'set' struct
as previously (which was a really BAAAD thing).
2002-12-09 15:37:54 +00:00
bf678a1ca9
only use Content-Length: header if not transfering data chunked
2002-12-01 11:20:41 +00:00
eef6c83503
Moved the compareheader function into this file and added Curl_ prefix
...
We now check if the chunked transfer-encoding header has been added "by force"
and if so, we enabled the chunky upload!
2002-11-28 15:45:06 +00:00
e5e2fb8274
Dan Becker fixed a minor memory leak on persistent connnections using
...
FOLLOWLOCATION and CURLOPT_USERPWD.
2002-11-26 17:32:15 +00:00
42acb00c81
moved the bools in the connectdata struct into the substruct named
...
ConnectBits where the other bools already are
2002-11-11 23:03:03 +00:00
03c22b4576
Now supports "Transfer-Encoding: chunked" for HTTP PUT operations where the
...
size of the uploaded file is unknown.
2002-11-11 08:40:37 +00:00
701509d322
Jeff Lawson fixed a few problems with connection re-use that remained when
...
you set CURLOPT_PROXY to "".
2002-10-10 08:00:49 +00:00
969217c9d9
make sure we free rangeline before we re-assign it to a new allocated
...
memory as otherwise we (might) leak memory
2002-09-25 12:47:38 +00:00
b466924717
removed use of extra unneeded variable
2002-09-23 12:47:18 +00:00
c19844a0a3
better deal with HTTP(S) servers that respond with no headers at all, test
...
case 306 added to verify that we do right
2002-09-13 12:40:36 +00:00
cac5251a98
Lukasz Czekierda correctly pointed out that curl used a bad Host: header
...
when talking to a IPv6-server using IPv6 IP address only.
2002-09-11 10:32:37 +00:00
ba4e69bebc
updated source code boilerplate/header
2002-09-03 11:52:59 +00:00
64bbe9dfaf
James Gallagher's Content-Encoding work
2002-09-02 22:31:18 +00:00
8aa3f14303
SOCKS5 support added (contributed by a still unnamed person). Not properly
...
working for "IPv6 enabled" libcurls yet, but should be pretty easy for
someone to adjust.
2002-08-30 09:20:11 +00:00
982c5460f0
Andrew Francis removed the need for/use of MSVC pragmas
2002-08-26 17:20:29 +00:00
08ef208fb7
added disable-[protocol] support, largely provided by Miklos Nemeth
2002-06-11 11:13:01 +00:00
fc37ef9e4b
make sure data->set.postfields is non-NULL before doing strlen() on the
...
pointer. Bugs item #566835 .
2002-06-11 07:20:21 +00:00
c0257c6721
T. Bharath made the request size add up as it is documented to do.
2002-06-03 12:47:08 +00:00
ef436bdbe8
renamed the TIMECOND defines to be CURL_ prefixed
2002-04-22 23:53:15 +00:00
95f78080ab
This makes formposting with a specified file missing fail. curl_easy_perform
...
will then return CURLE_READ_ERROR.
2002-04-15 11:19:03 +00:00
93516effe4
the HTTP request is a CURLINFO_HEADER_OUT
2002-04-12 07:53:12 +00:00
3f6133be27
Jean-Philippe Barrette-LaPierre provided his patch that introduces
...
CURLOPT_DEBUGFUNCTION and CURLOPT_DEBUGDATA.
2002-04-12 07:21:11 +00:00
e8109b09b1
error code cleanup, use the new SEND/RECV errors
2002-04-10 13:44:42 +00:00
974f314f57
copyright string (year) update
2002-03-19 07:54:55 +00:00
468b787272
if CURLOPT_POSTFIELDS isn't set, but CURLOPT_POST is, we will assume that
...
we should read the POST-data from the read callback
2002-03-14 14:39:23 +00:00
535258ffe4
Philip Gladstone's size problem in add_buffer_send()
2002-02-18 22:41:52 +00:00
dfda7ba456
corrected the Expect: ignore, made Content-Type: possible to skip
2002-02-17 14:42:44 +00:00
c40b4f6c39
don't add 2 to the post size, that was a previous mistake because there
...
was an extra CRLF added to the post data
2002-02-07 09:32:40 +00:00
85dbf82d93
append a CRLF pair after the content-type line
2002-01-29 20:32:10 +00:00
e3f10eb825
no longer add CRLF _after_ POST data, it should not be needed. Pedro Neves
...
pointed out this ugliness.
2002-01-27 11:51:11 +00:00
cba9838e8f
Somewhat ugly fix to deal with non-blocking sockets. We just loop and try
...
again. THIS IS NOT A NICE FIX.
2002-01-16 14:47:00 +00:00
4931fbce49
Curl_read() now returns a negative return code if EWOULDBLOCK or similar
2002-01-14 23:14:59 +00:00
e192261788
failf() calls should not have newlines in the message string!
2001-12-11 13:13:01 +00:00
47e67eab26
corrected the comment above gmtime_r
2001-12-07 15:56:57 +00:00
650b95045d
added gmtime_r check
2001-12-07 15:51:59 +00:00
e6dd4a6456
Klevtsov Vadim's time condition fix
2001-11-16 11:21:50 +00:00
c2479ccb7a
my proxytunnel fix accidentally ruined the normal https connects
2001-11-13 08:34:24 +00:00
05f3ca880f
made CURLOPT_HTTPPROXYTUNNEL work for plain HTTP as well
2001-11-12 14:08:41 +00:00
1affbff8f9
new Curl_ConnectHTTPProxyTunnel() function, needs a **lot** of testing!!!
2001-11-12 09:47:09 +00:00
69d5d88259
Added better checking of return codes when we send data to sockets/connections
2001-10-31 14:57:00 +00:00
4e37187e44
now counts header size return from server and if nothing is returned from a
...
HTTP server we return error
2001-10-19 11:58:32 +00:00
8e91d5de8e
looks nicer and is better compatible with older vim versions
2001-10-11 09:32:19 +00:00
a9181f8f00
added the option CURLOPT_HTTP_VERSION that can specify which HTTP version
...
libcurl should use in its request
2001-10-09 06:52:37 +00:00
437fd064c9
modified GetLine(), removed Curl_http_close()
2001-09-18 15:29:57 +00:00
6147879837
Added formatting sections for emacs and vim
2001-09-07 04:01:32 +00:00
0ece1b5c34
Major rename and redesign of the internal "backbone" structs. Details will
...
be posted in a minute to the libcurl list.
2001-08-30 22:48:34 +00:00
08655d8d5d
Georg Huettenegger's patch curl-7.8.1-pre5-patch-20010819
2001-08-21 13:18:07 +00:00
1b00298b52
modified to use the renamed kerberos functions with Curl_ prefix
2001-08-17 10:14:06 +00:00
70ad8a0b2b
Using CURLOPT_POST without using CURLOPT_POSTFIELDS caused us to strlen()
...
a NULL pointer. Now, we treat a missing CURLOPT_POSTFIELDS as if there is
no data to send.
2001-08-15 13:38:36 +00:00
c11a1bf72a
made some char * into const char * and I removed the check for size > 0
...
in the add_buffer function.
2001-08-14 08:28:15 +00:00
2cf45f68b0
Curl_FormFree renamed to Curl_formclean, as it turns out VMS for example
...
requires all global symbols to be *case insentively* unique! curl_formfree
is a global function we shouldn't touch.
2001-08-06 12:36:18 +00:00
8987244758
httpreq cleanup fix
2001-08-03 11:52:53 +00:00
77f34915ce
removed _REENTRANT define
2001-05-31 07:03:04 +00:00
c7dbde9f3f
Uses the Curl_SSLConnect() according to the new return type
2001-05-12 09:30:42 +00:00
89ba66e071
corrected the read-callback typecase since FILE * was replaced with void *
2001-05-07 12:38:28 +00:00
3fd65fb7d8
Remade resume stuff to keep data in the connectdata struct instead of the
...
main handle struct to work with persistant connections
2001-04-18 07:25:11 +00:00
fd8ea204c0
use GMT for the conditional timed gets (reported by Phil Karn)
2001-04-17 07:28:49 +00:00
f8e1fc32de
Edin Kadribaic's bug report #408488 forced a rearrange of two struct fields
...
from urldata to connectdata, quite correctly.
2001-03-14 14:11:11 +00:00
ac0bad2433
remake Host: for each connection and it'll work with proxies too
2001-03-09 16:48:18 +00:00
a23db7b7c7
"Transfer-Encoding: chunked" support added
2001-03-07 23:51:41 +00:00
c21f848c1c
enable persistant connections by default
2001-03-05 13:40:08 +00:00
90ac37a683
Curl_http() could crash on connection re-use
2001-03-04 15:25:54 +00:00
d1cfbd51b5
remade the port number stuff so that following locations work and doing
...
intermixed HTTP and FTP persistant connections also work!
2001-03-02 15:34:15 +00:00
9c63fcf210
we only allocate the HTTP struct if we need to
2001-02-22 23:41:15 +00:00
584dbffe60
moved the dynamicly set pointers to the connectdata struct
2001-02-22 23:32:02 +00:00
46e0937263
corrected memory leaks when re-using connections
2001-02-20 17:46:35 +00:00
a1d6ad2610
multiple connection support initial commit
2001-02-20 17:35:51 +00:00
a140e5311d
moved the protocol-specific free to allow easier multiple transfers
2001-02-13 13:34:16 +00:00
abb14de7e0
GetLine() didn't properly act on -1 lengths returned from Curl_read()
2001-02-07 09:31:03 +00:00
c41c5a0ef2
curl_read() and Curl_read() now have ssize_t in the last argument
2001-01-31 13:54:12 +00:00
513bc44421
HTTP PUT resume now sends Content-Range: headers as I believe the RFC2616
...
describes, Bob Schader's research seems to agree.
2001-01-29 07:24:20 +00:00
3a8210c975
Resume is now done with a Content-Range header instead of a Range header if
...
the request isn't GET. Presumably, this is how it should be made.
2001-01-27 18:57:07 +00:00
3a3f632bf0
Made it possible to do "upload resume" over HTTP
2001-01-26 15:49:39 +00:00
f0b9aefd2e
Curl_read() and Curl_write() are now used for reading/writing sockets.
...
Some functions changed prototype due to this change as well.
2001-01-25 12:19:02 +00:00
ae0a6835bd
Transfer is now Curl_Tranfer() and transfer.h is used instead of highlevel.h
...
and download.h
2001-01-17 13:23:01 +00:00
6403257886
renamed Curl_ to curl_ for the printf() prefixes
2001-01-05 12:19:42 +00:00
4031104404
Internal symbols that aren't static are now prefixed with 'Curl_'
2001-01-05 10:11:41 +00:00
24dee483e9
dual-license fix
2001-01-03 09:29:33 +00:00
9a9013ac25
typecasted the argument to isspace() to int, to remove a pedantic compiler
...
warning
2000-11-21 09:31:03 +00:00
42280e95bf
removed URL size restrictions
2000-11-20 08:53:21 +00:00
868488b518
memory leak cleanup campaign
2000-11-17 14:03:58 +00:00
bfb118e42a
Added space after the Cookie: header keyword
2000-11-13 11:29:32 +00:00
c44b10de41
remote_port used in Host: headers only when non-default
2000-10-20 13:48:38 +00:00
85174ed358
memory leak adjusts
2000-10-11 10:29:25 +00:00
0f8facb49b
added memory debugging include file
2000-10-09 11:12:34 +00:00
5865860ad6
counts header and request size
2000-10-04 13:07:43 +00:00
d3f9b2a490
introduced the new add_buffer() concept that makes the HTTP request to get
...
sent in only one shot
2000-10-03 11:01:32 +00:00
13962adcb5
7.3 commit
2000-09-28 10:26:44 +00:00
6f6dfa97a8
Uses the new interface to ssend() and the base64 encoder
2000-09-21 08:48:48 +00:00
00eaf20298
bugfixed the proxytunnel
2000-09-15 12:55:38 +00:00
0da7057591
more "anything through http proxy tunnel" fixes
2000-09-15 06:10:52 +00:00
86ff2c46b7
introduced 'tunnel through http proxy' for ftp
2000-09-14 14:05:01 +00:00
b6e18f2f66
#include "setup.h" moved first of all includes
2000-08-24 14:26:33 +00:00
1b1f143cd6
hostname and large file support added
2000-08-24 12:33:16 +00:00
d4731b7050
Albert Chin-A-Young's fixes
2000-08-23 07:23:42 +00:00
349a3aaf5b
Made it possible to replace the Content-Type: and Content-Length: headers
...
curl issues when doing a regular HTTP post. This should not be taken light-
heartedly though. Replacing them might get you into trouble!
2000-08-11 06:39:53 +00:00
Daniel Stenberg
Gisle Vanem
Sterling Hughes