`conn->connect_state` is NULL when doing a regular non-CONNECT request
over the proxy and should therefor be considered complete at once.
Fixes#1853Closes#1862
Reported-by: Lawrence Wagerfield
... the previous code would reset the header length wrongly (since
5113ad0424). This makes test 1060 reliable again.
Also: make sws send even smaller chunks of data to increase the
likeliness of this happening.
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
A client MUST ignore any Content-Length or Transfer-Encoding header
fields received in a successful response to CONNECT.
"Successful" described as: 2xx (Successful). RFC 7231 4.3.6
Prior to this change such a case would cause an error.
In some ways this bug appears to be a regression since c50b878. Prior to
that libcurl may have appeared to function correctly in such cases by
acting on those headers instead of causing an error. But that behavior
was also incorrect.
Bug: https://github.com/curl/curl/issues/1317
Reported-by: mkzero@users.noreply.github.com
Properly resolve, convert and log the proxy host names.
Support the "--connect-to" feature for SOCKS proxies and for passive FTP
data transfers.
Follow-up to cb4e2be
Reported-by: Jay Satiro
Fixes https://github.com/curl/curl/issues/1248
Since it now reads responses one byte a time, a loop could be removed
and it is no longer limited to get the whole response within 16K, it is
now instead only limited to 16K maximum header line lengths.
... so that it doesn't read data that is actually coming from the
remote. 2xx responses have no body from the proxy, that data is from the
peer.
Fixes#1132
A server MUST NOT send any Transfer-Encoding or Content-Length header
fields in a 2xx (Successful) response to CONNECT. (RFC 7231 section
4.3.6)
Also fixes the three test cases that did this.
* HTTPS proxies:
An HTTPS proxy receives all transactions over an SSL/TLS connection.
Once a secure connection with the proxy is established, the user agent
uses the proxy as usual, including sending CONNECT requests to instruct
the proxy to establish a [usually secure] TCP tunnel with an origin
server. HTTPS proxies protect nearly all aspects of user-proxy
communications as opposed to HTTP proxies that receive all requests
(including CONNECT requests) in vulnerable clear text.
With HTTPS proxies, it is possible to have two concurrent _nested_
SSL/TLS sessions: the "outer" one between the user agent and the proxy
and the "inner" one between the user agent and the origin server
(through the proxy). This change adds supports for such nested sessions
as well.
A secure connection with a proxy requires its own set of the usual SSL
options (their actual descriptions differ and need polishing, see TODO):
--proxy-cacert FILE CA certificate to verify peer against
--proxy-capath DIR CA directory to verify peer against
--proxy-cert CERT[:PASSWD] Client certificate file and password
--proxy-cert-type TYPE Certificate file type (DER/PEM/ENG)
--proxy-ciphers LIST SSL ciphers to use
--proxy-crlfile FILE Get a CRL list in PEM format from the file
--proxy-insecure Allow connections to proxies with bad certs
--proxy-key KEY Private key file name
--proxy-key-type TYPE Private key file type (DER/PEM/ENG)
--proxy-pass PASS Pass phrase for the private key
--proxy-ssl-allow-beast Allow security flaw to improve interop
--proxy-sslv2 Use SSLv2
--proxy-sslv3 Use SSLv3
--proxy-tlsv1 Use TLSv1
--proxy-tlsuser USER TLS username
--proxy-tlspassword STRING TLS password
--proxy-tlsauthtype STRING TLS authentication type (default SRP)
All --proxy-foo options are independent from their --foo counterparts,
except --proxy-crlfile which defaults to --crlfile and --proxy-capath
which defaults to --capath.
Curl now also supports %{proxy_ssl_verify_result} --write-out variable,
similar to the existing %{ssl_verify_result} variable.
Supported backends: OpenSSL, GnuTLS, and NSS.
* A SOCKS proxy + HTTP/HTTPS proxy combination:
If both --socks* and --proxy options are given, Curl first connects to
the SOCKS proxy and then connects (through SOCKS) to the HTTP or HTTPS
proxy.
TODO: Update documentation for the new APIs and --proxy-* options.
Look for "Added in 7.XXX" marks.
Visual C++ now complains about implicitly casting time_t (64-bit) to
long (32-bit). Fix this by changing some variables from long to time_t,
or explicitly casting to long where the public interface would be
affected.
Closes#1131
Curl_select_ready() was the former API that was replaced with
Curl_select_check() a while back and the former arg setup was provided
with a define (in order to leave existing code unmodified).
Now we instead offer SOCKET_READABLE and SOCKET_WRITABLE for the most
common shortcuts where only one socket is checked. They're also more
visibly macros.
With HTTP/2 each transfer is made in an indivial logical stream over the
connection, making most previous errors that caused the connection to get
forced-closed now instead just kill the stream and not the connection.
Fixes#941
curl_printf.h defines printf to curl_mprintf, etc. This can cause
problems with external headers which may use
__attribute__((format(printf, ...))) markers etc.
To avoid that they cause problems with system includes, we include
curl_printf.h after any system headers. That makes the three last
headers to always be, and we keep them in this order:
curl_printf.h
curl_memory.h
memdebug.h
None of them include system headers, they all do funny #defines.
Reported-by: David Benjamin
Fixes#743
** WORK-AROUND **
The introduced non-blocking general behaviour for Curl_proxyCONNECT()
didn't work for the data connection establishment unless it was very
fast. The newly introduced function argument makes it operate in a more
blocking manner, more like it used to work in the past. This blocking
approach is only used when the FTP data connecting through HTTP proxy.
Blocking like this is bad. A better fix would make it work more
asynchronously.
Bug: https://github.com/bagder/curl/issues/278
Since we just started make use of free(NULL) in order to simplify code,
this change takes it a step further and:
- converts lots of Curl_safefree() calls to good old free()
- makes Curl_safefree() not check the pointer before free()
The (new) rule of thumb is: if you really want a function call that
frees a pointer and then assigns it to NULL, then use Curl_safefree().
But we will prefer just using free() from now on.
The function "free" is documented in the way that no action shall occur for
a passed null pointer. It is therefore not needed that a function caller
repeats a corresponding check.
http://stackoverflow.com/questions/18775608/free-a-null-pointer-anyway-or-check-first
This issue was fixed by using the software Coccinelle 1.0.0-rc24.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
The code used some happy eyeballs logic even _after_ CONNECT has been
sent to a proxy, while the happy eyeball phase is already (should be)
over by then.
This is solved by splitting the multi state into two separate states
introducing the new SENDPROTOCONNECT state.
Bug: http://curl.haxx.se/mail/lib-2015-01/0170.html
Reported-by: Peter Laser
... for the local variable name in functions holding the return
code. Using the same name universally makes code easier to read and
follow.
Also, unify code for checking for CURLcode errors with:
if(result) or if(!result)
instead of
if(result == CURLE_OK), if(CURLE_OK == result) or if(result != CURLE_OK)
This is usually due to failed auth. There's no point in us keeping such
a connection alive since it shouldn't be re-used anyway.
Bug: http://curl.haxx.se/bug/view.cgi?id=1381
Reported-by: Marcel Raad
This reverts commit cb3e6dfa35 and instead fixes the problem
differently.
The reverted commit addressed a test failure in test 1021 by simplifying
and generalizing the code flow in a way that damaged the
performance. Now we modify the flow so that Curl_proxyCONNECT() again
does as much as possible in one go, yet still do test 1021 with and
without valgrind. It failed due to mistakes in the multi state machine.
Bug: http://curl.haxx.se/bug/view.cgi?id=1397
Reported-by: Paul Saab
Make all code use connclose() and connkeep() when changing the "close
state" for a connection. These two macros take a string argument with an
explanation, and debug builds of curl will include that in the debug
output. Helps tracking connection re-use/close issues.
Port number zero is perfectly allowed to connect to. I moved to storing
the remote port number in an int so that -1 means undefined and 0-65535
can be used for legitimate port numbers.
Daniel Stenberg
Maksim Stsepanenka
Marcel Raad
Marcel Raad
Sylvestre Ledru
Desmond O. Chang
Jay Satiro
Michael Kaufmann
Cameron MacMinn
Okhin Vasilij
Alex Rousskov
Markus Elfring