Daniel Stenberg 536f5f442e curl: use 2TLS by default ... Make this the default for the curl tool (if built with HTTP/2 powers enabled) unless a specific HTTP version is requested on the command line. This should allow more users to get HTTP/2 powers without having to change anything.		2015-12-13 09:26:43 +01:00
..
.gitattributes	Add .gitattributes files to turn off CRLF translation for some files	2010-03-24 23:48:35 -04:00
.gitignore	runtests: use a DISABLED.local file too	2015-04-26 19:59:13 +02:00
CMakeLists.txt	tests: move TESTCASES to Makefile.inc, add show for cmake	2014-10-13 11:50:21 +02:00
DISABLED	tests: Re-enabled tests 889 and 890 following POP3 fix	2015-11-20 07:04:19 +00:00
Makefile.am	tests: Distribute CMakeLists.txt files in subdirectories	2015-06-25 07:48:50 -07:00
Makefile.inc	Makefile.inc: Fixed test run error	2015-11-21 00:04:57 +00:00
test1	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test2	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test3	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test4	Curl_add_custom_headers: support headers with no data	2011-09-13 16:17:21 -07:00
test5	URL parser: cut off '#' fragments from URLs (better)	2012-11-06 23:17:57 +01:00
test6	Added some <keywords> sections and use some key words more consistently.	2007-10-12 01:44:22 +00:00
test7	Added some <keywords> sections and use some key words more consistently.	2007-10-12 01:44:22 +00:00
test8	cookies: only use full host matches for hosts used as IP address	2014-09-10 07:32:36 +02:00
test9	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test10	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test11	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test12	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test13	Do not mix CRLF and LF header endings in a couple of HTTP tests	2012-11-19 10:58:02 +01:00
test14	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test15	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test16	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test17	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test18	tests: added globbing keyword to URL globbing tests	2014-07-12 01:52:07 +02:00
test19	Updated the test harness to check for protocol support before running each	2007-03-09 21:01:39 +00:00
test20	Added "non-existing host" test keywords to make it easy to skip those	2009-05-20 19:30:06 +00:00
test21	Convert (most of) the test data files into genuine XML. A handful still	2007-01-23 02:25:56 +00:00
test22	test22: expand a backtick command	2014-11-13 23:06:44 +01:00
test23	Convert (most of) the test data files into genuine XML. A handful still	2007-01-23 02:25:56 +00:00
test24	tests: specify 'text' mode for some output files in verify section	2013-03-18 20:45:35 +01:00
test25	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test26	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test27	Use double quotes in command lines for consistency.	2007-09-18 20:41:20 +00:00
test28	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test29	Fixed some XML parsing problems.	2008-02-09 02:37:31 +00:00
test30	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test31	cookie: handle spaces after the name in Set-Cookie	2015-04-01 23:25:29 +02:00
test32	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test33	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test34	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test35	restored from my messy previous commit mistake	2008-11-21 07:47:31 +00:00
test36	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test37	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test38	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test39	formpost: support quotes, commas and semicolon in file names	2013-01-22 15:43:29 +01:00
test40	Do not mix CRLF and LF header endings in a couple of HTTP tests	2012-11-19 10:58:02 +01:00
test41	Convert (most of) the test data files into genuine XML. A handful still	2007-01-23 02:25:56 +00:00
test42	Do not mix CRLF and LF header endings in a couple of HTTP tests	2012-11-19 10:58:02 +01:00
test43	- I removed the default use of "Pragma: no-cache" from libcurl when a proxy is	2008-11-19 22:00:14 +00:00
test44	Use double quotes in command lines for consistency.	2007-09-18 20:41:20 +00:00
test45	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test46	test46: update cookie expire time	2015-08-10 00:12:12 +02:00
test47	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test48	test48: verify that HEAD doesn't close extra	2012-07-12 00:08:37 +02:00
test49	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test50	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test51	Added test cases 2000 and 2001 which test multiple protocols using the	2007-10-24 19:40:07 +00:00
test52	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test53	Do not mix CRLF and LF header endings in a couple of HTTP tests	2012-11-19 10:58:02 +01:00
test54	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test55	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test56	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test57	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test58	curl_easy_escape: don't escape "unreserved" characters	2010-09-28 23:49:32 +02:00
test59	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test60	Added test case 1068 to do a simple HTTP PUT from stdin	2008-08-28 02:03:54 +00:00
test61	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test62	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test63	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test64	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test65	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test66	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test67	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test68	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test69	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test70	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test71	Edited some test keywords for consistency	2008-06-21 17:56:48 +00:00
test72	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test73	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test74	tests: added globbing keyword to URL globbing tests	2014-07-12 01:52:07 +02:00
test75	tests: added globbing keyword to URL globbing tests	2014-07-12 01:52:07 +02:00
test76	Updated the test harness to check for protocol support before running each	2007-03-09 21:01:39 +00:00
test77	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test78	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test79	- I removed the default use of "Pragma: no-cache" from libcurl when a proxy is	2008-11-19 22:00:14 +00:00
test80	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test81	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test82	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test83	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test84	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test85	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test86	tests: added globbing keyword to URL globbing tests	2014-07-12 01:52:07 +02:00
test87	tests: added globbing keyword to URL globbing tests	2014-07-12 01:52:07 +02:00
test88	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test89	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test90	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test91	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test92	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test93	- I removed the default use of "Pragma: no-cache" from libcurl when a proxy is	2008-11-19 22:00:14 +00:00
test94	test1509: verify proxy header response headers count	2013-03-27 15:30:46 +01:00
test95	test1509: verify proxy header response headers count	2013-03-27 15:30:46 +01:00
test96	free: instead of Curl_safefree()	2015-03-16 15:01:15 +01:00
test97	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test98	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test99	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test100	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test101	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test102	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test103	Changed some FTP tests to validate the format of the PORT and EPRT commands	2007-09-17 21:44:57 +00:00
test104	Adjust test number mismatch	2009-12-24 12:04:33 +00:00
test105	Adjust test number mismatch	2009-12-24 12:04:33 +00:00
test106	FTP: access files in root dir correctly	2013-04-12 22:43:13 +02:00
test107	ftp@example.com is now the new anonymous FTP password. I opted for 'ftp' on	2007-02-13 22:50:16 +00:00
test108	Changed some FTP tests to validate the format of the PORT and EPRT commands	2007-09-17 21:44:57 +00:00
test109	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test110	ftp: close connection as soon as ABOR has been sent	2010-11-08 20:50:52 +01:00
test111	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test112	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test113	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test114	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test115	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test116	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test117	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test118	- Fred Machado posted about a weird FTP problem on the curl-users list and when	2008-12-08 20:20:51 +00:00
test119	Changed some FTP tests to validate the format of the PORT and EPRT commands	2007-09-17 21:44:57 +00:00
test120	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test121	ftp@example.com is now the new anonymous FTP password. I opted for 'ftp' on	2007-02-13 22:50:16 +00:00
test122	ftp: close connection as soon as ABOR has been sent	2010-11-08 20:50:52 +01:00
test123	ftp@example.com is now the new anonymous FTP password. I opted for 'ftp' on	2007-02-13 22:50:16 +00:00
test124	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test125	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test126	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test127	ftp@example.com is now the new anonymous FTP password. I opted for 'ftp' on	2007-02-13 22:50:16 +00:00
test128	ftp@example.com is now the new anonymous FTP password. I opted for 'ftp' on	2007-02-13 22:50:16 +00:00
test129	oops, I forgot to cvs add this before my previous commit (Dan Fandrich	2010-01-19 22:22:54 +00:00
test130	netrc: add unit tests for 'default' support	2015-04-24 23:57:55 +02:00
test131	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test132	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test133	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test134	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test135	ftp: prevent server from hanging on closed data connection	2010-10-29 12:01:19 +02:00
test136	Convert (most of) the test data files into genuine XML. A handful still	2007-01-23 02:25:56 +00:00
test137	add keywords	2007-12-08 22:56:17 +00:00
test138	add keywords	2007-12-08 22:56:17 +00:00
test139	add keywords	2007-12-08 22:56:17 +00:00
test140	add keywords	2007-12-08 22:56:17 +00:00
test141	Edited some test keywords for consistency	2008-06-21 17:56:48 +00:00
test142	add keywords	2007-12-08 22:56:17 +00:00
test143	add keywords	2007-12-08 22:56:17 +00:00
test144	add keywords	2007-12-08 22:56:17 +00:00
test145	add keywords	2007-12-08 22:56:17 +00:00
test146	FTP: WILDCARDMATCH/CHUNKING/FNMATCH added	2010-05-12 23:17:51 +02:00
test147	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test148	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test149	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test150	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test151	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test152	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test153	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test154	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test155	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test156	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test157	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test158	formpost: better random boundaries	2013-06-25 09:55:49 +02:00
test159	HTTP-NTLM: fail auth on connection close instead of looping	2015-05-31 23:21:15 +02:00
test160	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test161	FTP: CURLE_PARTIAL_FILE should not cause control connection to be closed	2012-01-09 22:50:20 +01:00
test162	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test163	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test164	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test165	- I removed the default use of "Pragma: no-cache" from libcurl when a proxy is	2008-11-19 22:00:14 +00:00
test166	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test167	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test168	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test169	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test170	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test171	cookies: change the URL in the cookie jar file header	2012-07-03 11:27:45 +02:00
test172	tests: Fixed test172 cookie expiry	2014-02-02 11:01:10 +00:00
test173	Fixed a NULL pointer dereference in form posting	2010-08-24 16:45:31 -07:00
test174	Add keywords for a couple of currently keyword-less HTTP tests	2012-11-19 10:58:14 +01:00
test175	Do not mix CRLF and LF header endings in a couple of HTTP tests	2012-11-19 10:58:02 +01:00
test176	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test177	Added some <keywords> sections and use some key words more consistently.	2007-10-12 01:44:22 +00:00
test178	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test179	- I removed the default use of "Pragma: no-cache" from libcurl when a proxy is	2008-11-19 22:00:14 +00:00
test180	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test181	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test182	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test183	- I removed the default use of "Pragma: no-cache" from libcurl when a proxy is	2008-11-19 22:00:14 +00:00
test184	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test185	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test186	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test187	Added keywords	2008-07-31 02:51:44 +00:00
test188	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test189	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test190	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test191	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test192	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test193	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test194	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test195	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test196	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test197	Add keywords for a couple of currently keyword-less HTTP tests	2012-11-19 10:58:14 +01:00
test198	Add keywords for a couple of currently keyword-less HTTP tests	2012-11-19 10:58:14 +01:00
test199	tests: added globbing keyword to URL globbing tests	2014-07-12 01:52:07 +02:00
test200	added keyword	2008-01-05 12:15:41 +00:00
test201	tests: add keywords for a couple of FILE tests	2013-08-11 19:56:14 +02:00
test202	tests: add keywords for a couple of FILE tests	2013-08-11 19:56:14 +02:00
test203	tests: add keywords for a couple of FILE tests	2013-08-11 19:56:14 +02:00
test204	tests: add keywords for a couple of FILE tests	2013-08-11 19:56:14 +02:00
test205	tests: add keywords for a couple of FILE tests	2013-08-11 19:56:14 +02:00
test206	tests: Don't run HTTP digest tests for SSPI based builds	2014-11-06 20:36:08 +00:00
test207	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test208	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test209	NTLM: set a fake entropy for debug builds with CURL_ENTROPY set	2014-06-11 23:15:48 +02:00
test210	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test211	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test212	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test213	NTLM: set a fake entropy for debug builds with CURL_ENTROPY set	2014-06-11 23:15:48 +02:00
test214	Add keywords for a couple of currently keyword-less HTTP tests	2012-11-19 10:58:14 +01:00
test215	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test216	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test217	test1509: verify proxy header response headers count	2013-03-27 15:30:46 +01:00
test218	Add keywords for a couple of currently keyword-less HTTP tests	2012-11-19 10:58:14 +01:00
test220	Tweaked a few tests to test proper Turkish locale handling	2008-10-23 01:53:27 +00:00
test221	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test222	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test223	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test224	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test225	Removed some erroneous "compressed" key words	2010-02-09 22:50:52 +00:00
test226	Added const to some pointer variables	2008-10-08 01:17:51 +00:00
test227	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test228	Removed some erroneous "compressed" key words	2010-02-09 22:50:52 +00:00
test229	Removed some erroneous "compressed" key words	2010-02-09 22:50:52 +00:00
test231	tests: add keywords for a couple of FILE tests	2013-08-11 19:56:14 +02:00
test233	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test234	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test235	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test236	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test237	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test238	FTP: reject illegal port numbers in EPSV 229 responses	2013-01-15 22:35:48 +01:00
test239	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test240	Convert (most of) the test data files into genuine XML. A handful still	2007-01-23 02:25:56 +00:00
test241	Convert (most of) the test data files into genuine XML. A handful still	2007-01-23 02:25:56 +00:00
test242	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test243	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test245	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test246	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test247	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test248	Add FTP keywords for a couple of currently keyword-less FTP tests	2012-11-19 10:58:14 +01:00
test249	Add keywords for a couple of currently keyword-less HTTP tests	2012-11-19 10:58:14 +01:00
test250	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test251	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test252	Added IPv6 keywords for some more tests that require IPv6 networking support	2008-06-12 23:50:57 +00:00
test253	Added IPv6 keywords for some more tests that require IPv6 networking support	2008-06-12 23:50:57 +00:00
test254	Added IPv6 keywords for some more tests that require IPv6 networking support	2008-06-12 23:50:57 +00:00
test255	Added IPv6 keywords for some more tests that require IPv6 networking support	2008-06-12 23:50:57 +00:00
test256	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test257	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test258	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test259	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test260	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test261	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test262	restored from my messy previous commit mistake	2008-11-21 07:47:31 +00:00
test263	- I removed the default use of "Pragma: no-cache" from libcurl when a proxy is	2008-11-19 22:00:14 +00:00
test264	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test265	NTLM: set a fake entropy for debug builds with CURL_ENTROPY set	2014-06-11 23:15:48 +02:00
test266	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test267	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test268	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test269	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test270	ftp@example.com is now the new anonymous FTP password. I opted for 'ftp' on	2007-02-13 22:50:16 +00:00
test271	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test272	ftp@example.com is now the new anonymous FTP password. I opted for 'ftp' on	2007-02-13 22:50:16 +00:00
test273	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test274	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test275	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test276	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test277	formpost: better random boundaries	2013-06-25 09:55:49 +02:00
test278	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test279	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test280	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test281	Convert (most of) the test data files into genuine XML. A handful still	2007-01-23 02:25:56 +00:00
test282	Adjusted how libcurl treats HTTP 1.1 responses without content-lenth or	2007-06-25 13:58:14 +00:00
test283	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test284	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test285	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test286	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test287	CURLOPT_HEADEROPT: default to separate	2015-04-28 21:02:37 +02:00
test288	tests: add keywords for a couple of FILE tests	2013-08-11 19:56:14 +02:00
test289	Fixed test description	2008-01-07 19:54:40 +00:00
test290	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test291	Don't tear down the ftp connection if the maximum filesize was exceeded	2007-03-30 01:13:47 +00:00
test292	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test293	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test294	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test295	Added test cases 294 and 295 to test --ftp-account handling	2007-04-13 20:59:15 +00:00
test296	Added test cases 296, 297 and 298 to test --ftp-method handling	2007-04-18 06:30:28 +00:00
test297	Added test cases 296, 297 and 298 to test --ftp-method handling	2007-04-18 06:30:28 +00:00
test298	Added test cases 296, 297 and 298 to test --ftp-method handling	2007-04-18 06:30:28 +00:00
test299	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test300	Added key words to all SSL-using tests so they can be skipped if necessary.	2008-02-09 02:08:34 +00:00
test301	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test302	test1509: verify proxy header response headers count	2013-03-27 15:30:46 +01:00
test303	added an additional second to allow test to pass on heavily loaded servers	2010-02-03 01:41:07 +00:00
test304	Added key words to all SSL-using tests so they can be skipped if necessary.	2008-02-09 02:08:34 +00:00
test305	Added key words to all SSL-using tests so they can be skipped if necessary.	2008-02-09 02:08:34 +00:00
test306	Added key words to all SSL-using tests so they can be skipped if necessary.	2008-02-09 02:08:34 +00:00
test307	Added key words to all SSL-using tests so they can be skipped if necessary.	2008-02-09 02:08:34 +00:00
test308	Added key words to all SSL-using tests so they can be skipped if necessary.	2008-02-09 02:08:34 +00:00
test309	Added test309 to test HTTP redirect to HTTPS URL	2008-02-19 21:57:41 +00:00
test310	Added PEM certificate keyword	2010-01-18 20:20:07 +00:00
test311	Added PEM certificate keyword	2010-01-18 20:20:07 +00:00
test312	Added PEM certificate keyword	2010-01-18 20:20:07 +00:00
test313	test313: a new test for CRL support	2010-05-27 23:45:18 +02:00
test320	test320: Expect the Host header to be the first header	2015-03-13 22:37:23 +01:00
test321	test320/1/2/4: fix the port number substitution variables	2014-07-11 23:47:33 +02:00
test322	test320/1/2/4: fix the port number substitution variables	2014-07-11 23:47:33 +02:00
test323	TLS-SRP: support added when using GnuTLS	2011-01-19 20:35:02 +01:00
test324	test320/1/2/4: fix the port number substitution variables	2014-07-11 23:47:33 +02:00
test325	test325: verify --proto-redir https=>http	2014-04-23 22:36:01 +02:00
test350	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test351	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test352	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test353	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test354	Added test case 354 that makes a simple FTP retrieval without password, which	2007-07-22 10:08:59 +00:00
test400	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test401	Added ftps upload test 401	2007-03-29 22:50:23 +00:00
test402	Various test file cleanups, including using <servercmd> instead of writing	2007-04-18 20:22:01 +00:00
test403	Added HTTP --max-filesize tests and FTPS CCC failure test.	2007-03-30 18:50:55 +00:00
test404	Resurrected old FTPS error tests 402 and 403 as 404 and 405.	2007-03-30 22:04:14 +00:00
test405	- Fixed test case 405 to not fail when libcurl is built with GnuTLS	2008-02-20 12:18:08 +00:00
test406	Changed some FTP tests to validate the format of the PORT and EPRT commands	2007-09-17 21:44:57 +00:00
test407	Added FTPS test cases 406 and 407	2007-05-08 22:14:30 +00:00
test408	Changed some FTP tests to validate the format of the PORT and EPRT commands	2007-09-17 21:44:57 +00:00
test409	Added FTPS upload tests 408 and 409.	2007-05-10 20:03:20 +00:00
test500	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test501	Added missing <keywords>	2008-11-11 21:58:41 +00:00
test502	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test503	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test504	multi tests: OOM handling fixes	2011-10-21 16:52:14 +02:00
test505	tests: add keywords for a couple of FTP tests	2013-08-11 19:56:01 +02:00
test506	CURLOPT_COOKIELIST: Added "RELOAD" command	2014-09-25 16:28:17 +02:00
test507	Added "non-existing host" test keywords to make it easy to skip those	2009-05-20 19:30:06 +00:00
test508	tests: add keywords to the last 7 tests lacking them	2014-04-03 11:06:24 +02:00
test509	tests: add keywords to the last 7 tests lacking them	2014-04-03 11:06:24 +02:00
test510	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test511	tests: add keywords for a couple of FTP tests	2013-08-11 19:56:01 +02:00
test512	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test513	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test514	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test515	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test516	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test517	tests: add keywords to the last 7 tests lacking them	2014-04-03 11:06:24 +02:00
test518	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test519	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test520	tests: add keywords for a couple of FTP tests	2013-08-11 19:56:01 +02:00
test521	FTP tests: enable text-mode for data and datacheck sections	2014-01-31 20:05:21 +01:00
test522	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test523	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test524	ftp@example.com is now the new anonymous FTP password. I opted for 'ftp' on	2007-02-13 22:50:16 +00:00
test525	Added multi keyword	2008-08-26 20:11:12 +00:00
test526	Added multi keyword	2008-08-26 20:11:12 +00:00
test527	Added multi keyword	2008-08-26 20:11:12 +00:00
test528	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test529	Added multi keyword	2008-08-26 20:11:12 +00:00
test530	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test531	Added multi keyword	2008-08-26 20:21:59 +00:00
test532	Added multi keyword	2008-08-26 20:11:12 +00:00
test533	- Fred Machado posted about a weird FTP problem on the curl-users list and when	2008-12-08 20:20:51 +00:00
test534	Added "non-existing host" test keywords to make it easy to skip those	2009-05-20 19:30:06 +00:00
test535	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test536	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test537	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test538	multi tests: OOM handling fixes	2011-10-21 16:52:14 +02:00
test539	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test540	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test541	tests: add keywords for a couple of FTP tests	2013-08-11 19:56:01 +02:00
test542	Max Katsev reported that when doing a libcurl FTP request with	2007-09-26 12:00:01 +00:00
test543	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test544	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test545	test545: make it not use a trailing zero	2014-10-16 23:40:49 +02:00
test546	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test547	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test548	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test549	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test550	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test551	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test552	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test553	tests: added missing HTTP NTLM auth keywords	2014-03-15 10:54:49 +01:00
test554	formadd: support >2GB files on windows	2015-11-02 08:41:46 +01:00
test555	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test556	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test557	tests: add keywords to the last 7 tests lacking them	2014-04-03 11:06:24 +02:00
test558	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test560	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test561	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test562	- I was going to fix issue #59 in KNOWN_BUGS	2009-04-30 09:02:39 +00:00
test563	parse_remote_port: fix ;type= URL suffix over HTTP proxy	2010-08-10 00:56:45 +02:00
test564	multi-socks: fix connect to proxy	2011-04-28 10:06:49 +02:00
test565	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test566	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test567	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test568	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test569	Added some missing test case XML tags and keywords	2011-10-21 13:33:40 -07:00
test570	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test571	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test572	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test573	Added the "flaky" keyword to a number of tests	2014-10-26 13:50:38 +01:00
test574	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test575	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test576	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test578	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test579	Ensure progress.size_dl/progress.size_ul are always >= 0	2014-09-07 23:23:12 +02:00
test580	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test581	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test582	tests: disable valgrind on the remaining scp/sftp tests	2014-03-15 10:41:40 +01:00
test583	tests: disable valgrind on the remaining scp/sftp tests	2014-03-15 10:41:40 +01:00
test584	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test585	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test586	tests: verify OPEN/CLOSESOCKETFUNCTION	2011-05-18 22:56:46 +02:00
test587	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test588	tests: Moved some comments so the test data files parse as XML	2014-02-03 00:23:34 +01:00
test590	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test591	tests: Moved some comments so the test data files parse as XML	2014-02-03 00:23:34 +01:00
test592	tests: Moved some comments so the test data files parse as XML	2014-02-03 00:23:34 +01:00
test593	tests: Moved some comments so the test data files parse as XML	2014-02-03 00:23:34 +01:00
test594	tests: Moved some comments so the test data files parse as XML	2014-02-03 00:23:34 +01:00
test595	tests: Moved some comments so the test data files parse as XML	2014-02-03 00:23:34 +01:00
test596	tests: Moved some comments so the test data files parse as XML	2014-02-03 00:23:34 +01:00
test597	multi interface: fix block when CONNECT_ONLY option is used	2011-12-07 15:37:05 +01:00
test598	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test599	Ensure progress.size_dl/progress.size_ul are always >= 0	2014-09-07 23:23:12 +02:00
test600	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test601	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test602	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test603	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test604	tests: disable valgrind on the remaining scp/sftp tests	2014-03-15 10:41:40 +01:00
test605	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test606	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test607	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test608	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test609	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test610	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test611	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test612	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test613	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test614	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test615	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test616	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test617	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test618	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test619	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test620	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test621	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test622	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test623	tests: disable valgrind on the remaining scp/sftp tests	2014-03-15 10:41:40 +01:00
test624	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test625	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test626	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test627	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test628	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test629	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test630	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test631	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test632	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test633	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test634	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test635	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test636	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test637	use --insecure for the SFTP and SCP tests	2009-07-28 17:55:00 +00:00
test638	test: SFTP quote commands with * prefix	2011-11-18 20:30:46 +01:00
test639	test: SFTP quote commands with * prefix	2011-11-18 20:30:46 +01:00
test640	test640/1: add tests for --head with sftp and scp	2014-03-14 23:38:00 +01:00
test641	test640/1: add tests for --head with sftp and scp	2014-03-14 23:38:00 +01:00
test700	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test701	Replaced 127.0.0.1 with %HOSTIP where possible	2007-09-14 19:32:31 +00:00
test702	Cleaned up SOCKS tests. Use a magic port number instead of killserver	2007-06-07 20:14:00 +00:00
test703	Cleaned up SOCKS tests. Use a magic port number instead of killserver	2007-06-07 20:14:00 +00:00
test704	Cleaned up SOCKS tests. Use a magic port number instead of killserver	2007-06-07 20:14:00 +00:00
test705	Cleaned up SOCKS tests. Use a magic port number instead of killserver	2007-06-07 20:14:00 +00:00
test706	Incorporated Daniel Black's test706 and test707 SOCKS test cases.	2007-06-08 17:21:40 +00:00
test707	Incorporated Daniel Black's test706 and test707 SOCKS test cases.	2007-06-08 17:21:40 +00:00
test708	proxy: allow socks:// prefix in proxy string	2011-04-28 15:08:09 +02:00
test709	test709: clarify the test in the name	2013-04-25 23:42:38 +02:00
test710	test710: verify that --proxy socks5://hostname works	2011-08-05 00:46:59 +02:00
test711	ftp_state_pasv_resp: connect through proxy also when set by env	2013-04-26 16:49:25 +02:00
test712	ftp_state_pasv_resp: connect through proxy also when set by env	2013-04-26 16:49:25 +02:00
test800	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test801	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test802	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test803	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test804	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test805	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test806	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test807	tests: remove trailing CRs from keywords	2014-03-30 17:05:22 +02:00
test808	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test809	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test810	test810: Updated to use new IMAP URL query string functionality	2014-04-18 16:51:50 +01:00
test811	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test812	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test813	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test814	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test815	tests: remove trailing CRs from keywords	2014-03-30 17:05:22 +02:00
test816	tests: remove trailing CRs from keywords	2014-03-30 17:05:22 +02:00
test817	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test818	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test819	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test820	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test821	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test822	NTLM: set a fake entropy for debug builds with CURL_ENTROPY set	2014-06-11 23:15:48 +02:00
test823	sasl: Added back qop argument mistakenly removed in e95ca7ce	2014-06-15 14:11:35 +02:00
test824	tests: Renamed existing OAuth 2.0 (XOAUTH) tests	2015-11-14 11:19:57 +00:00
test825	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test826	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test827	NTLM: set a fake entropy for debug builds with CURL_ENTROPY set	2014-06-11 23:15:48 +02:00
test828	tests: Renamed existing OAuth 2.0 (XOAUTH) tests	2015-11-14 11:19:57 +00:00
test829	tests: Moved CR LF in URL tests to their respective protocol groups	2013-11-23 14:49:50 +00:00
test830	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test831	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test832	tests: Disabled DIGEST-MD5 tests when running with SSPI enabled	2014-04-06 16:32:59 +01:00
test833	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test834	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test835	tests: Disabled DIGEST-MD5 tests when running with SSPI enabled	2014-04-06 16:32:59 +01:00
test836	tests: added some missing closing tags	2014-04-03 11:49:48 +02:00
test837	tests: Grouped IMAP SASL EXTERNAL tests with other IMAP tests	2015-01-28 19:50:34 +00:00
test838	tests: Grouped IMAP SASL EXTERNAL tests with other IMAP tests	2015-01-28 19:50:34 +00:00
test839	tests: Grouped IMAP SASL EXTERNAL tests with other IMAP tests	2015-01-28 19:50:34 +00:00
test840	tests: Grouped IMAP SASL EXTERNAL tests with other IMAP tests	2015-01-28 19:50:34 +00:00
test841	imap: Don't check for continuation when executing a CUSTOMREQUEST	2015-11-08 12:12:33 +00:00
test842	tests: Corrected copy and pasted comments from commit e643c5c908	2015-12-03 23:31:24 +00:00
test843	tests: Corrected copy and pasted comments from commit e643c5c908	2015-12-03 23:31:24 +00:00
test844	tests: Corrected copy and pasted comments from commit e643c5c908	2015-12-03 23:31:24 +00:00
test845	tests: Corrected copy and pasted comments from commit e643c5c908	2015-12-03 23:31:24 +00:00
test850	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test851	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test852	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test853	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test854	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test855	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test856	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test857	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test858	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test859	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test860	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test861	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test862	tests: Added "Clear Text" authentication keyword	2014-03-30 11:34:23 +01:00
test863	tests: remove trailing CRs from keywords	2014-03-30 17:05:22 +02:00
test864	tests: Corrected "APOP" authentication keyword	2014-03-30 12:00:33 +01:00
test865	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test866	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test867	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test868	NTLM: set a fake entropy for debug builds with CURL_ENTROPY set	2014-06-11 23:15:48 +02:00
test869	sasl: Added back qop argument mistakenly removed in e95ca7ce	2014-06-15 14:11:35 +02:00
test870	tests: Renamed existing OAuth 2.0 (XOAUTH) tests	2015-11-14 11:19:57 +00:00
test871	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test872	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test873	NTLM: set a fake entropy for debug builds with CURL_ENTROPY set	2014-06-11 23:15:48 +02:00
test874	tests: Renamed existing OAuth 2.0 (XOAUTH) tests	2015-11-14 11:19:57 +00:00
test875	tests: Moved CR LF in URL tests to their respective protocol groups	2013-11-23 14:49:50 +00:00
test876	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test877	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test878	tests: Disabled DIGEST-MD5 tests when running with SSPI enabled	2014-04-06 16:32:59 +01:00
test879	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test880	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test881	tests: Disabled DIGEST-MD5 tests when running with SSPI enabled	2014-04-06 16:32:59 +01:00
test882	tests: added some missing closing tags	2014-04-03 11:49:48 +02:00
test883	tests: Grouped POP3 SASL EXTERNAL tests with other POP3 tests	2015-01-28 19:51:15 +00:00
test884	tests: Grouped POP3 SASL EXTERNAL tests with other POP3 tests	2015-01-28 19:51:15 +00:00
test885	tests: Grouped POP3 SASL EXTERNAL tests with other POP3 tests	2015-01-28 19:51:15 +00:00
test886	tests: Grouped POP3 SASL EXTERNAL tests with other POP3 tests	2015-01-28 19:51:15 +00:00
test887	tests: Corrected copy and pasted comments from commit e643c5c908	2015-12-03 23:31:24 +00:00
test888	tests: Corrected copy and pasted comments from commit e643c5c908	2015-12-03 23:31:24 +00:00
test889	tests: Corrected copy and pasted comments from commit e643c5c908	2015-12-03 23:31:24 +00:00
test890	tests: Corrected copy and pasted comments from commit e643c5c908	2015-12-03 23:31:24 +00:00
test900	tests: Updated email addresses in SMTP tests following recent changes	2013-09-29 16:48:02 +01:00
test901	tests: Updated email addresses in SMTP tests following recent changes	2013-09-29 16:48:02 +01:00
test902	tests: Updated email addresses in SMTP tests following recent changes	2013-09-29 16:48:02 +01:00
test903	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test904	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test905	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test906	NTLM: set a fake entropy for debug builds with CURL_ENTROPY set	2014-06-11 23:15:48 +02:00
test907	sasl: Added back qop argument mistakenly removed in e95ca7ce	2014-06-15 14:11:35 +02:00
test908	tests: Renamed existing OAuth 2.0 (XOAUTH) tests	2015-11-14 11:19:57 +00:00
test909	tests: Updated email addresses in SMTP tests following recent changes	2013-09-29 16:48:02 +01:00
test910	tests: Updated email addresses in SMTP tests following recent changes	2013-09-29 16:48:02 +01:00
test911	tests: Updated email addresses in SMTP tests following recent changes	2013-09-29 16:48:02 +01:00
test912	tests: remove trailing CRs from keywords	2014-03-30 17:05:22 +02:00
test913	tests: remove trailing CRs from keywords	2014-03-30 17:05:22 +02:00
test914	tests: Added error code explanation comments	2013-11-24 12:35:45 +00:00
test915	tests: Updated email addresses in SMTP tests following recent changes	2013-09-29 16:48:02 +01:00
test916	tests: Added error code explanation comments	2013-11-24 12:35:45 +00:00
test917	tests: Updated email addresses in SMTP tests following recent changes	2013-09-29 16:48:02 +01:00
test918	tests: Added error code explanation comments	2013-11-24 12:35:45 +00:00
test919	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test920	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test921	NTLM: set a fake entropy for debug builds with CURL_ENTROPY set	2014-06-11 23:15:48 +02:00
test922	tests: Renamed existing OAuth 2.0 (XOAUTH) tests	2015-11-14 11:19:57 +00:00
test923	tests: Corrected missing data reply sections from 3d50e91aee	2013-11-16 17:19:26 +00:00
test924	tests: Corrected missing data reply sections from 3d50e91aee	2013-11-16 17:19:26 +00:00
test925	tests: Corrected missing data reply sections from 3d50e91aee	2013-11-16 17:19:26 +00:00
test926	test926: Corrected unknown user reply from commit 0d735c29f9	2013-11-16 20:33:08 +00:00
test927	tests: Added SMTP EXPN command test	2013-11-17 00:20:58 +00:00
test928	tests: added some missing closing tags	2014-04-03 11:49:48 +02:00
test929	tests: added some missing closing tags	2014-04-03 11:49:48 +02:00
test930	tests: Added SMTP NOOP and RSET tests	2013-11-17 12:52:42 +00:00
test931	tests: Moved CR LF in URL tests to their respective protocol groups	2013-11-23 14:49:50 +00:00
test932	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test933	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test934	tests: Disabled DIGEST-MD5 tests when running with SSPI enabled	2014-04-06 16:32:59 +01:00
test935	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test936	tests: Replaced email authentication keywords with SASL based keywords	2014-03-30 11:56:42 +01:00
test937	tests: Disabled DIGEST-MD5 tests when running with SSPI enabled	2014-04-06 16:32:59 +01:00
test938	test938: added missing closing tags	2015-03-21 01:27:44 +01:00
test939	tests: Added SMTP with credentials test for RFC-821 based server	2014-03-31 20:55:58 +01:00
test940	tests: Added SMTP with credientials test when not supported by server	2014-04-01 07:19:29 +01:00
test941	tests: Added SMTP with --crlf test case	2014-11-26 23:58:42 +00:00
test942	tests: Grouped SMTP SASL EXTERNAL tests with other SMTP tests	2015-01-28 19:55:06 +00:00
test943	tests: Grouped SMTP SASL EXTERNAL tests with other SMTP tests	2015-01-28 19:55:06 +00:00
test944	tests: Grouped SMTP SASL EXTERNAL tests with other SMTP tests	2015-01-28 19:55:06 +00:00
test945	tests: Grouped SMTP SASL EXTERNAL tests with other SMTP tests	2015-01-28 19:55:06 +00:00
test946	tests: Corrected copy and pasted comments from commit e643c5c908	2015-12-03 23:31:24 +00:00
test947	tests: Corrected copy and pasted comments from commit e643c5c908	2015-12-03 23:31:24 +00:00
test948	tests: Corrected copy and pasted comments from commit e643c5c908	2015-12-03 23:31:24 +00:00
test949	tests: Corrected copy and pasted comments from commit e643c5c908	2015-12-03 23:31:24 +00:00
test1000	remove stupid comment since there's no content in this test case	2007-08-17 22:24:51 +00:00
test1001	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1002	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1003	Bug report #1779054 (http://curl.haxx.se/bug/view.cgi?id=1779054) pointed	2007-08-22 14:18:06 +00:00
test1004	Added test case 2004.	2007-10-25 21:04:51 +00:00
test1005	Added test case 1005 to test excessively-long replies spread out over	2007-08-23 23:25:47 +00:00
test1006	Bug report #1779054 (http://curl.haxx.se/bug/view.cgi?id=1779054) pointed	2007-08-24 14:00:42 +00:00
test1007	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test1008	NTLM: set a fake entropy for debug builds with CURL_ENTROPY set	2014-06-11 23:15:48 +02:00
test1009	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test1010	FTP tests: enable text-mode for more datacheck sections	2014-02-01 13:43:19 +01:00
test1011	Do not mix CRLF and LF header endings in a couple of HTTP tests	2012-11-19 10:58:02 +01:00
test1012	Do not mix CRLF and LF header endings in a couple of HTTP tests	2012-11-19 10:58:02 +01:00
test1013	now returns 0	2008-06-01 22:04:09 +00:00
test1014	now returns 0	2008-06-01 22:04:09 +00:00
test1015	tests: add keywords for a couple of HTTP tests	2013-08-11 19:56:05 +02:00
test1016	Added Range keyword	2008-08-14 19:18:18 +00:00
test1017	Added Range keyword	2008-08-14 19:18:18 +00:00
test1018	Added Range keyword	2008-08-14 19:18:18 +00:00
test1019	Added Range keyword	2008-08-14 19:18:18 +00:00
test1020	Added Range keyword	2008-08-14 19:18:18 +00:00
test1021	NTLM: set a fake entropy for debug builds with CURL_ENTROPY set	2014-06-11 23:15:48 +02:00
test1022	now returns 0	2008-06-01 22:04:09 +00:00
test1023	now returns 0	2008-06-01 22:04:09 +00:00
test1024	Added test case 1024 to test a scenario similar to the one reported	2008-04-10 04:21:08 +00:00
test1025	Added test case 1025 to test a command-line cookie with Location: following	2008-04-10 18:18:55 +00:00
test1026	Fixed the XML syntax of a few test files.	2008-07-17 22:39:23 +00:00
test1027	Fixed the XML syntax of a few test files.	2008-07-17 22:39:23 +00:00
test1028	Added test cases 1052 through 1055 to test uploading data from files	2008-07-30 21:04:44 +00:00
test1029	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-01 13:47:00 +01:00
test1030	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1031	- Bug report #1973352 (http://curl.haxx.se/bug/view.cgi?id=1973352) identified	2008-05-26 20:39:41 +00:00
test1032	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1033	Fixed the XML syntax of a few test files.	2008-07-17 22:39:23 +00:00
test1034	- I removed the default use of "Pragma: no-cache" from libcurl when a proxy is	2008-11-19 22:00:14 +00:00
test1035	- I removed the default use of "Pragma: no-cache" from libcurl when a proxy is	2008-11-19 22:00:14 +00:00
test1036	ftp: close connection as soon as ABOR has been sent	2010-11-08 20:50:52 +01:00
test1037	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test1038	Added test cases 1038 and 1039 to test Adrian Kreher's report that ftp	2008-07-11 05:08:06 +00:00
test1039	Added test cases 1038 and 1039 to test Adrian Kreher's report that ftp	2008-07-11 05:08:06 +00:00
test1040	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1041	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1042	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1043	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1044	Added test 1044 to test large file support in ftp with -I.	2008-07-26 20:09:36 +00:00
test1045	Added tests 1082 through 1085 to test symbolic --interface parameters	2008-10-08 21:46:55 +00:00
test1046	Added tests 1082 through 1085 to test symbolic --interface parameters	2008-10-08 21:46:55 +00:00
test1047	FTP tests: enable text-mode for more datacheck sections	2014-02-01 13:43:19 +01:00
test1048	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test1049	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test1050	Added test case 1050 to test --ftp-port with an IPv6 address.	2008-07-29 01:05:28 +00:00
test1051	- Test cases 1051, 1052 and 1055 were added by Daniel Fandrich on July 30 and	2008-08-04 22:00:22 +00:00
test1052	- Test cases 1051, 1052 and 1055 were added by Daniel Fandrich on July 30 and	2008-08-04 22:00:22 +00:00
test1053	Improved the logic the decides whether to use HTTP 1.1 features or not in a	2008-09-05 17:58:53 +00:00
test1054	Added keywords	2008-07-31 02:51:44 +00:00
test1055	- Test cases 1051, 1052 and 1055 were added by Daniel Fandrich on July 30 and	2008-08-04 22:00:22 +00:00
test1056	Added test of IPv6 scope handling	2008-07-31 02:38:51 +00:00
test1057	ftp: prevent server from hanging on closed data connection	2010-10-29 12:01:19 +02:00
test1058	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1059	test1509: verify proxy header response headers count	2013-03-27 15:30:46 +01:00
test1060	tests: Don't run HTTP digest tests for SSPI based builds	2014-11-06 20:36:08 +00:00
test1061	tests: Don't run HTTP digest tests for SSPI based builds	2014-11-06 20:36:08 +00:00
test1062	Fixed a boundary condition error in ftp_readresp() whereby a non-terminal	2008-08-11 23:16:08 +00:00
test1063	Added test 1063 to test an invalid large range on a file:	2008-08-14 19:18:01 +00:00
test1064	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test1065	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test1066	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test1067	added test case 1067 to verify --referer "firstone.html;auto"	2008-08-23 21:27:58 +00:00
test1068	Added test case 1068 to do a simple HTTP PUT from stdin	2008-08-28 02:03:54 +00:00
test1069	Improved the logic the decides whether to use HTTP 1.1 features or not in a	2008-09-05 17:58:53 +00:00
test1070	better description	2008-09-22 21:33:18 +00:00
test1071	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1072	Improved the logic the decides whether to use HTTP 1.1 features or not in a	2008-09-05 17:58:53 +00:00
test1073	Fixed misleading test message	2010-03-31 22:22:37 -07:00
test1074	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test1075	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1076	- Martin Drasar provided the CURLOPT_POSTREDIR patch. It renames	2008-09-05 16:13:20 +00:00
test1077	- I removed the default use of "Pragma: no-cache" from libcurl when a proxy is	2008-11-19 22:00:14 +00:00
test1078	test1509: verify proxy header response headers count	2013-03-27 15:30:46 +01:00
test1079	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1080	test suite: stop conversion of valid output to CRLF on Windows	2014-02-01 13:49:58 +01:00
test1081	test suite: stop conversion of valid output to CRLF on Windows	2014-02-01 13:49:58 +01:00
test1082	Added tests 1082 through 1085 to test symbolic --interface parameters	2008-10-08 21:46:55 +00:00
test1083	Don't rely on shell support to run multiple precheck tests	2008-10-13 20:41:02 +00:00
test1084	callbacks: acknowledge progress callback error returns	2010-08-10 23:16:08 +02:00
test1085	callbacks: acknowledge progress callback error returns	2010-08-10 23:16:08 +02:00
test1086	Added the "flaky" keyword to a number of tests	2014-10-26 13:50:38 +01:00
test1087	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1088	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1089	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test1090	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test1091	Fixed a couple more locale-dependent toupper conversions, mainly for	2009-01-21 04:42:47 +00:00
test1092	Improved the title and keywords	2009-01-21 04:46:13 +00:00
test1093	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test1094	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test1095	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1096	verify that a 550-response for a RETR returns 78 but also that the control	2009-02-19 13:47:06 +00:00
test1097	tests: Disabled NTLM tests when running with SSPI enabled	2013-12-28 20:37:00 +00:00
test1098	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-01 13:47:00 +01:00
test1099	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test1100	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1101	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1102	- Introduced a SYST-based test to properly set-up name format when dealing with the OS/400 FTP server.	2009-08-24 12:57:25 +00:00
test1103	- Introduced a SYST-based test to properly set-up name format when dealing with the OS/400 FTP server.	2009-08-24 12:57:25 +00:00
test1104	Added HTTP proxy keyword	2009-09-14 18:43:53 +00:00
test1105	cookies: only use full host matches for hosts used as IP address	2014-09-10 07:32:36 +02:00
test1106	Test #1106 needs an ftp enabled client	2009-12-16 15:24:12 +00:00
test1107	- Ingmar Runge enhanced libcurl's FTP engine to support the PRET command. This	2010-01-01 14:44:44 +00:00
test1108	- Ingmar Runge enhanced libcurl's FTP engine to support the PRET command. This	2010-01-01 14:44:44 +00:00
test1109	Julien Chaffraix adjusted "<name> section" line length	2010-01-22 07:32:09 +00:00
test1110	Julien Chaffraix adjusted "<name> section" line length	2010-01-22 07:32:09 +00:00
test1111	Julien Chaffraix adjusted "<name> section" line length	2010-01-22 07:32:09 +00:00
test1112	test1112: Increase the timeout from 7s to 16s	2013-09-22 18:23:09 +02:00
test1113	Added the "flaky" keyword to a number of tests	2014-10-26 13:50:38 +01:00
test1114	test1114: fix line-endings checks on Windows after 75f00de	2014-02-15 09:14:36 +01:00
test1115	tests: Made the crypto test feature usable	2014-02-17 09:50:46 +01:00
test1116	http: handle trailer headers in all chunked responses	2010-08-25 13:42:14 +02:00
test1117	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1118	URL-parsing: consider ? a divider	2010-10-19 20:20:06 +02:00
test1119	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test1120	Fixed closing test tag	2011-04-20 16:51:44 -07:00
test1121	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1122	transfer-encoding: added new option and cmdline	2011-04-18 19:46:21 +02:00
test1123	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test1124	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test1125	transfer-encoding: added new option and cmdline	2011-04-18 19:46:21 +02:00
test1126	tests: added HTTP If-Modified-Since tests	2011-05-13 08:55:15 +02:00
test1127	tests: added HTTP If-Modified-Since tests	2011-05-13 08:55:15 +02:00
test1128	HTTP time condition: force closure for 200 OK	2011-06-07 13:40:11 +02:00
test1129	http error response: stop sending when error is received	2011-07-20 00:08:41 +02:00
test1130	http error response: stop sending when error is received	2011-07-20 00:08:41 +02:00
test1131	http error response: stop sending when error is received	2011-07-20 00:08:41 +02:00
test1132	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test1133	formpost: use semicolon in multipart/mixed	2014-02-07 09:43:36 +01:00
test1134	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1135	multi: Move http2 push function declarations to header end	2015-06-30 17:19:21 -04:00
test1136	teste1136: only run when PSL is enabled	2015-10-18 23:20:08 +02:00
test1137	test1137: verify --ignore-content-length for FTP	2015-10-23 15:24:56 +02:00
test1138	http redirects: %-encode bytes outside of ascii range	2015-11-02 12:48:03 +01:00
test1200	Tweaked some test data files	2010-08-25 16:43:26 -07:00
test1201	Tweaked some test data files	2010-08-25 16:43:26 -07:00
test1202	Tweaked some test data files	2010-08-25 16:43:26 -07:00
test1203	Fixed the IPv6 host address in test1203	2010-10-14 12:45:01 -07:00
test1204	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1205	large headers: have curl accept >16K headers	2011-10-24 17:28:41 +02:00
test1206	FTP: perform active connections non-blocking	2011-12-20 20:30:02 +01:00
test1207	FTP: perform active connections non-blocking	2011-12-20 20:30:02 +01:00
test1208	always-multi: always use non-blocking internals	2013-01-17 19:40:35 +01:00
test1209	FTP tests 1206 - 1209: don't expect QUIT	2011-11-25 22:49:49 +01:00
test1210	-J -O: use -O name if no Content-Disposition header comes!	2011-11-20 23:35:49 +01:00
test1211	test 1211: FTP test to repeat bug #3429299	2011-11-25 23:15:58 +01:00
test1212	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1213	HTTP proxy: insert slash in URL if missing	2013-03-15 14:18:16 +01:00
test1214	HTTP proxy: insert slash in URL if missing	2013-03-15 14:18:16 +01:00
test1215	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1216	test1218: another cookie tailmatch test	2013-04-11 23:52:12 +02:00
test1217	test1217: verify parsing 257 responses with "rubbish" before path	2013-04-09 22:21:49 +02:00
test1218	test1218: another cookie tailmatch test	2013-04-11 23:52:12 +02:00
test1219	FTP: handle a 230 welcome response	2013-04-12 23:59:37 +02:00
test1220	tests: add keywords to the last 7 tests lacking them	2014-04-03 11:06:24 +02:00
test1221	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test1222	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test1223	writeout: -w now supports remote_ip/port and local_ip/port	2013-01-03 23:16:38 +01:00
test1224	FTP: access files in root dir correctly	2013-04-12 22:43:13 +02:00
test1225	FTP: access files in root dir correctly	2013-04-12 22:43:13 +02:00
test1226	FTP: access files in root dir correctly	2013-04-12 22:43:13 +02:00
test1227	FTP: access files in root dir correctly	2013-04-12 22:43:13 +02:00
test1228	tests: Added a keyword for tests depending on internal info logs	2014-01-24 23:39:05 +01:00
test1229	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1230	curl: stop interpreting IPv6 literals as glob patterns.	2014-03-30 23:45:29 +02:00
test1231	dotdot: introducing dot file path cleanup	2013-06-22 14:15:07 +02:00
test1232	tests: test1232 verifies dotdot removal from path with proxy	2013-07-23 20:51:15 +02:00
test1233	FTP: when EPSV gets a 229 but fails to connect, retry with PASV	2013-08-06 09:57:59 +02:00
test1234	tests: added globbing keyword to URL globbing tests	2014-07-12 01:52:07 +02:00
test1235	tests: added globbing keyword to URL globbing tests	2014-07-12 01:52:07 +02:00
test1236	glob: error out on range overflow	2013-08-16 11:55:04 +02:00
test1237	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1238	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test1239	test1239: verify 4cd444e01a and the simulated 304 response	2013-10-07 14:42:21 +02:00
test1240	test1240: verify 867b52a7ac (glob ranges with text to the right)	2013-10-22 00:10:16 +02:00
test1241	CURLOPT_PATH_AS_IS: added	2015-03-24 10:31:58 +01:00
test1300	unittests: a dedicated feature in tests	2011-01-03 22:42:46 +01:00
test1301	tests: <info> tag corrections	2011-01-04 23:13:10 +01:00
test1302	tests: <info> tag corrections	2011-01-04 23:13:10 +01:00
test1303	unittest: 1303 tests Curl_timeleft	2011-01-04 23:13:10 +01:00
test1304	test suite: use test case specific netrc file names	2011-09-05 12:39:50 +02:00
test1305	Added unit test 1306 so tests 558 & 559 are now fully replaced	2011-03-04 15:13:12 -08:00
test1306	Added unit test 1306 so tests 558 & 559 are now fully replaced	2011-03-04 15:13:12 -08:00
test1307	Moved test 577 into the unit test framework as test 1307	2011-03-04 15:56:40 -08:00
test1308	curl_formget: fix FILE * leak	2011-06-13 22:32:00 +02:00
test1309	testsuite: more Windows line-endings fixes	2014-02-15 09:19:27 +01:00
test1310	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1311	-J: support ';' in quoted file names	2011-08-04 17:48:45 +02:00
test1312	-J: support ';' in quoted file names	2011-08-04 17:48:45 +02:00
test1313	test1313: test content-disposition with uneven quotes	2011-08-04 23:25:55 +02:00
test1314	Added some missing test case XML tags and keywords	2011-10-21 13:33:40 -07:00
test1315	New test for multiple file upload	2011-12-16 11:39:53 +01:00
test1316	FTP tests: enable text-mode for more datacheck sections	2014-02-01 13:43:19 +01:00
test1317	new test: verify --resolve	2011-12-23 14:46:20 +01:00
test1318	Add --resolve to the keywords and name of test 1318	2012-11-19 10:58:14 +01:00
test1319	tests: added missing <features> http to a number of tests	2014-01-25 12:47:04 +01:00
test1320	tests: added missing <features> http to a number of tests	2014-01-25 12:47:04 +01:00
test1321	tests: added missing <features> http to a number of tests	2014-01-25 12:47:04 +01:00
test1325	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1326	Add two tests for telnet: URLs	2012-01-18 22:20:33 +01:00
test1327	Add two tests for telnet: URLs	2012-01-18 22:20:33 +01:00
test1328	tests: added globbing keyword to URL globbing tests	2014-07-12 01:52:07 +02:00
test1329	parse_proxy: bail out on zero-length proxy names!	2012-02-10 16:26:20 +01:00
test1330	test suite: stop conversion of valid output to CRLF on Windows	2014-02-01 13:49:58 +01:00
test1331	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1332	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1333	Remove stray CRLF in chunk-encoded content-free request bodies	2012-11-26 15:28:53 +01:00
test1334	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1335	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1336	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1337	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1338	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1339	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1340	testsuite: more Windows line-endings fixes	2014-02-15 09:19:27 +01:00
test1341	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1342	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1343	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1344	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1345	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1346	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1347	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1348	test suite: stop conversion of valid output to CRLF on Windows	2014-02-01 13:49:58 +01:00
test1349	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1350	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1351	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1352	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1353	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1354	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1355	tests: fix test definitions # 1355, 1363, 1385 and 1393	2012-06-11 13:56:40 +02:00
test1356	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1357	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1358	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1359	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1360	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1361	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1362	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1363	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1364	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1365	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1366	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1367	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1368	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1369	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1370	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1371	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1372	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1373	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1374	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1375	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1376	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1377	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1378	test suite: stop conversion of valid output to CRLF on Windows	2014-02-01 13:49:58 +01:00
test1379	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1380	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1381	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1382	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1383	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1384	Fixed some XML syntax issues in the test data	2014-01-17 00:32:02 +01:00
test1385	test suite: stop conversion of valid output to CRLF on Windows	2014-02-01 13:49:58 +01:00
test1386	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1387	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1388	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1389	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1390	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1391	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:28 +01:00
test1392	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1393	HTTP tests: use CRLF as header seperator according to RFC 2616	2014-02-14 20:12:27 +01:00
test1394	unit1394.c: plug the curl tool unit test in	2013-05-06 15:03:13 +02:00
test1395	dotdot: introducing dot file path cleanup	2013-06-22 14:15:07 +02:00
test1396	test1396: invoke the correct test tool!	2013-06-22 22:20:31 +02:00
test1397	test1397: unit test for certificate name wildcard handling	2014-03-25 23:01:37 +01:00
test1398	mprintf: allow %.s with data not being zero terminated	2014-05-04 23:39:52 +02:00
test1400	curl: use 2TLS by default	2015-12-13 09:26:43 +01:00
test1401	curl: use 2TLS by default	2015-12-13 09:26:43 +01:00
test1402	curl: use 2TLS by default	2015-12-13 09:26:43 +01:00
test1403	curl: use 2TLS by default	2015-12-13 09:26:43 +01:00
test1404	curl: use 2TLS by default	2015-12-13 09:26:43 +01:00
test1405	curl: use 2TLS by default	2015-12-13 09:26:43 +01:00
test1406	curl: use 2TLS by default	2015-12-13 09:26:43 +01:00
test1407	curl: use 2TLS by default	2015-12-13 09:26:43 +01:00
test1408	tests: unified use of some keywords	2014-04-03 11:49:49 +02:00
test1409	tests: add 'FAILURE' keywords to tests 1409 and 1410	2013-08-11 19:56:11 +02:00
test1410	tests: add 'FAILURE' keywords to tests 1409 and 1410	2013-08-11 19:56:11 +02:00
test1411	HTTP: don't send Content-Length: 0 _and_ Expect: 100-continue	2014-04-04 15:46:35 +02:00
test1412	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1413	Do not mix CRLF and LF header endings in a couple of HTTP tests	2012-11-19 10:58:02 +01:00
test1414	test1414: FTP PORT download without SIZE support	2013-07-16 22:54:31 +02:00
test1415	tests: Added missing HTTP proxy keywords	2014-01-25 16:55:05 +01:00
test1416	test1416: verify the chunked size overflow detection	2014-01-17 08:37:44 +01:00
test1417	test1417: verify chunked-encoding transfer without CR	2014-01-17 08:37:44 +01:00
test1418	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1419	ConnectionExists: re-use connections better	2014-02-16 14:30:02 +01:00
test1420	curl: use 2TLS by default	2015-12-13 09:26:43 +01:00
test1421	proxy: re-use proxy connections (regression)	2015-03-11 11:54:22 +01:00
test1422	test142[23]: verify that an empty file is stored on success	2015-04-08 09:43:13 +02:00
test1423	test1423: added missing "file" to server section	2015-04-18 21:12:36 +02:00
test1424	curl -z: do not write empty file on unmet condition	2015-04-23 14:42:07 +02:00
test1428	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1429	HTTP: return larger than 3 digit response codes too	2014-10-27 16:28:10 +01:00
test1430	HTTP: return larger than 3 digit response codes too	2014-10-27 16:28:10 +01:00
test1431	HTTP: return larger than 3 digit response codes too	2014-10-27 16:28:10 +01:00
test1432	HTTP: return larger than 3 digit response codes too	2014-10-27 16:28:10 +01:00
test1433	HTTP: return larger than 3 digit response codes too	2014-10-27 16:28:10 +01:00
test1434	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test1435	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test1436	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test1500	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test1501	FTP: prevent the multi interface from blocking	2012-11-04 19:05:39 +01:00
test1502	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test1503	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test1504	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test1505	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test1506	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test1507	ftpserver.pl: Moved specifying the test number from the RCPT address	2013-09-29 10:02:00 +01:00
test1508	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test1509	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test1510	test1510: another flaky test	2015-05-23 16:28:09 +02:00
test1511	tests: Fix a couple of incomplete response lines	2014-07-26 23:12:53 +02:00
test1512	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test1513	test1513: make sure the callback is only called once	2015-11-24 23:33:37 +01:00
test1514	testsuite: changed HTTP and RTSP header line-endings to CRLF	2014-02-14 20:12:26 +01:00
test1515	tests: add test for bug #1303 (dns cache timeout)	2014-02-06 23:03:34 +01:00
test1516	tests: add test for bug #1327 (dns cache timeout)	2014-02-06 23:03:34 +01:00
test1520	test1520: Fixed initial teething problems	2014-12-28 13:04:15 +00:00
test1525	CURLOPT_HEADEROPT: added	2014-04-04 17:03:43 +02:00
test1526	CURLOPT_PROXYHEADER: set headers for proxy-only	2014-04-04 17:03:43 +02:00
test1527	CURLOPT_HEADEROPT: default to separate	2015-04-28 21:02:37 +02:00
test1528	PROXYHEADER: send these headers in "normal" proxy requests too	2014-04-04 17:03:43 +02:00
test1529	tests: make sure CRLFs can't be used in URLs passed to proxy	2015-01-07 22:55:56 +01:00
test1530	test1530: added http to required features	2015-06-14 22:38:39 +02:00
test1531	test1531: verify POSTFIELDSIZE set after add_handle	2015-06-23 17:51:03 -07:00
test1600	unit1600: NTLM unit test	2015-02-03 20:37:44 +01:00
test1601	unit1601: MD5 unit tests	2015-02-03 23:05:55 +01:00
test1602	hostip: fix unintended destruction of hash table	2015-05-18 11:15:43 +02:00
test1603	unit1603: Added unit tests for hash functions	2015-11-12 22:49:32 +01:00
test1800	test1800: first plain-text http2 test case	2014-11-20 23:33:34 +01:00
test1801	http2: Fix missing nghttp2_session_send call in Curl_http2_switched	2015-04-02 15:19:29 +02:00
test1900	testsuite: use binary output mode for custom curl test tools	2014-02-14 20:12:27 +01:00
test1901	Added the "flaky" keyword to a number of tests	2014-10-26 13:50:38 +01:00
test1902	test1902: attempt to make the test more reliable	2015-07-26 22:20:26 +02:00
test1903	Added the "flaky" keyword to a number of tests	2014-10-26 13:50:38 +01:00
test2000	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test2001	Always use nocheck="yes" for consistency	2009-01-07 21:57:26 +00:00
test2002	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test2003	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test2004	tftp tests: verify sent options too	2015-11-06 10:55:30 +01:00
test2005	metalink tests: Updated expected output to include hash name	2012-09-17 07:35:11 +02:00
test2006	test2006: Updated expected output to include hash name	2012-09-18 00:14:34 +02:00
test2007	metalink tests: Updated expected output to include hash name	2012-09-17 07:35:11 +02:00
test2008	metalink tests: Updated expected output to include hash name	2012-09-17 07:35:11 +02:00
test2009	metalink tests: Updated expected output to include hash name	2012-09-17 07:35:11 +02:00
test2010	metalink tests: Updated expected output to include hash name	2012-09-17 07:35:11 +02:00
test2011	metalink tests: Updated expected output to include hash name	2012-09-17 07:35:11 +02:00
test2012	test2005 to test2016: improve failure detection	2012-06-29 15:44:50 +02:00
test2013	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test2014	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test2015	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test2016	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test2017	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test2018	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test2019	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test2020	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test2021	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test2022	code/docs: Use Unix rather than UNIX to avoid use of the trademark	2014-12-26 21:42:44 +00:00
test2023	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test2024	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test2025	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test2026	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test2027	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test2028	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test2029	http: always send Host: header as first header	2015-03-12 12:15:24 +01:00
test2030	test203[0-3]: Expect the Host header to be the first header	2015-03-12 16:06:11 +01:00
test2031	test203[0-3]: Expect the Host header to be the first header	2015-03-12 16:06:11 +01:00
test2032	test203[0-3]: Expect the Host header to be the first header	2015-03-12 16:06:11 +01:00
test2033	test203[0-3]: Expect the Host header to be the first header	2015-03-12 16:06:11 +01:00
test2034	SSL: Add PEM format support for public key pinning	2014-11-24 19:30:09 +01:00
test2035	SSL: Add PEM format support for public key pinning	2014-11-24 19:30:09 +01:00
test2036	test2036: verify -O with no slash at all in the URL	2014-10-09 16:50:26 +02:00
test2037	SSL: Add PEM format support for public key pinning	2014-11-24 19:30:09 +01:00
test2038	SSL: Add PEM format support for public key pinning	2014-11-24 19:30:09 +01:00
test2039	test2039: fixed line endings that caused a test failure	2015-04-25 10:17:46 +02:00
test2040	test2040: verify basic auth on re-used connections	2015-06-17 07:43:13 +02:00
test2041	test2041: fixed line endings in protocol part	2015-07-02 08:32:18 +02:00
test2042	SSL: Pinned public key hash support	2015-07-01 19:43:47 +02:00
test2043	SSL: Add an option to disable certificate revocation checks	2015-07-17 02:40:16 -04:00
test2044	CURLOPT_DEFAULT_PROTOCOL: added	2015-08-22 21:57:14 -04:00
test2045	CURLOPT_DEFAULT_PROTOCOL: added	2015-08-22 21:57:14 -04:00