Also updating a linter that was deprecated;
The linter 'exportloopref' is deprecated (since v1.60.2) due to: Since Go1.22 (loopvar) this linter is no longer relevant. Replaced by copyloopvar.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- https://github.com/golang/go/issues?q=milestone%3AGo1.22.7+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.22.6...go1.22.7
These minor releases include 3 security fixes following the security policy:
- go/parser: stack exhaustion in all Parse* functions
Calling any of the Parse functions on Go source code which contains deeply nested literals can cause a panic due to stack exhaustion.
This is CVE-2024-34155 and Go issue https://go.dev/issue/69138.
- encoding/gob: stack exhaustion in Decoder.Decode
Calling Decoder.Decode on a message which contains deeply nested structures can cause a panic due to stack exhaustion.
This is a follow-up to CVE-2022-30635.
Thanks to Md Sakib Anwar of The Ohio State University (anwar.40@osu.edu) for reporting this issue.
This is CVE-2024-34156 and Go issue https://go.dev/issue/69139.
- go/build/constraint: stack exhaustion in Parse
Calling Parse on a "// +build" build tag line with deeply nested expressions can cause a panic due to stack exhaustion.
This is CVE-2024-34158 and Go issue https://go.dev/issue/69141.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.23.1
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
It's not initialized, because there's no `docker` command installed
by default, but at least this makes sure that the basics are present
for testing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.12+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.11...go1.21.12
These minor releases include 1 security fixes following the security policy:
net/http: denial of service due to improper 100-continue handling
The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail.
An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail.
Thanks to Geoff Franks for reporting this issue.
This is CVE-2024-24791 and Go issue https://go.dev/issue/67555.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.21.12
**- Description for the changelog**
```markdown changelog
Update Go runtime to 1.21.12
```
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
full diff: https://github.com/golangci/golangci-lint/compare/v1.55.2...v1.59.0
Updated config to address warnings:
WARN [config_reader] The configuration option `run.skip-files` is deprecated, please use `issues.exclude-files`.
WARN [config_reader] The configuration option `linters.govet.check-shadowing` is deprecated. Please enable `shadow` instead, if you are not using `enable-all`.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.11 (released 2024-06-04) includes security fixes to the archive/zip
and net/netip packages, as well as bug fixes to the compiler, the go command,
the runtime, and the os package. See the Go 1.21.11 milestone on our issue
tracker for details;
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.11+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.10...go1.21.11
From the security announcement;
We have just released Go versions 1.22.4 and 1.21.11, minor point releases.
These minor releases include 2 security fixes following the security policy:
- archive/zip: mishandling of corrupt central directory record
The archive/zip package's handling of certain types of invalid zip files
differed from the behavior of most zip implementations. This misalignment
could be exploited to create an zip file with contents that vary depending
on the implementation reading the file. The archive/zip package now rejects
files containing these errors.
Thanks to Yufan You for reporting this issue.
This is CVE-2024-24789 and Go issue https://go.dev/issue/66869.
- net/netip: unexpected behavior from Is methods for IPv4-mapped IPv6 addresses
The various Is methods (IsPrivate, IsLoopback, etc) did not work as expected
for IPv4-mapped IPv6 addresses, returning false for addresses which would
return true in their traditional IPv4 forms.
Thanks to Enze Wang of Alioth and Jianjun Chen of Zhongguancun Lab
for reporting this issue.
This is CVE-2024-24790 and Go issue https://go.dev/issue/67680.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These minor releases include 2 security fixes following the security policy:
- cmd/go: arbitrary code execution during build on darwin
On Darwin, building a Go module which contains CGO can trigger arbitrary code execution when using the Apple version of ld, due to
usage of the -lto_library flag in a "#cgo LDFLAGS" directive.
Thanks to Juho Forsén of Mattermost for reporting this issue.
This is CVE-2024-24787 and Go issue https://go.dev/issue/67119.
- net: malformed DNS message can cause infinite loop
A malformed DNS message in response to a query can cause the Lookup functions to get stuck in an infinite loop.
Thanks to long-name-let-people-remember-you on GitHub for reporting this issue, and to Mateusz Poliwczak for bringing the issue to
our attention.
This is CVE-2024-24788 and Go issue https://go.dev/issue/66754.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.22.3
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.10+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.9...go1.21.10
**- Description for the changelog**
```markdown changelog
Update Go runtime to 1.21.10
```
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
go1.21.5 (released 2023-12-05) includes security fixes to the go command,
and the net/http and path/filepath packages, as well as bug fixes to the
compiler, the go command, the runtime, and the crypto/rand, net, os, and
syscall packages. See the Go 1.21.5 milestone on our issue tracker for
details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.5+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.5...go1.21.5
from the security mailing:
[security] Go 1.21.5 and Go 1.20.12 are released
Hello gophers,
We have just released Go versions 1.21.5 and 1.20.12, minor point releases.
These minor releases include 3 security fixes following the security policy:
- net/http: limit chunked data overhead
A malicious HTTP sender can use chunk extensions to cause a receiver
reading from a request or response body to read many more bytes from
the network than are in the body.
A malicious HTTP client can further exploit this to cause a server to
automatically read a large amount of data (up to about 1GiB) when a
handler fails to read the entire body of a request.
Chunk extensions are a little-used HTTP feature which permit including
additional metadata in a request or response body sent using the chunked
encoding. The net/http chunked encoding reader discards this metadata.
A sender can exploit this by inserting a large metadata segment with
each byte transferred. The chunk reader now produces an error if the
ratio of real body to encoded bytes grows too small.
Thanks to Bartek Nowotarski for reporting this issue.
This is CVE-2023-39326 and Go issue https://go.dev/issue/64433.
- cmd/go: go get may unexpectedly fallback to insecure git
Using go get to fetch a module with the ".git" suffix may unexpectedly
fallback to the insecure "git://" protocol if the module is unavailable
via the secure "https://" and "git+ssh://" protocols, even if GOINSECURE
is not set for said module. This only affects users who are not using
the module proxy and are fetching modules directly (i.e. GOPROXY=off).
Thanks to David Leadbeater for reporting this issue.
This is CVE-2023-45285 and Go issue https://go.dev/issue/63845.
- path/filepath: retain trailing \ when cleaning paths like \\?\c:\
Go 1.20.11 and Go 1.21.4 inadvertently changed the definition of the
volume name in Windows paths starting with \\?\, resulting in
filepath.Clean(\\?\c:\) returning \\?\c: rather than \\?\c:\ (among
other effects). The previous behavior has been restored.
This is an update to CVE-2023-45283 and Go issue https://go.dev/issue/64028.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Reverts "update to go1.21.4" due to regressions / breaking changes."
This reverts commit 4cf1c50ad1.
This re-applies commit 6472dabe4c.
----
update to go1.21.4
go1.21.4 (released 2023-11-07) includes security fixes to the path/filepath package, as well as bug fixes to the linker, the runtime, the compiler, and the go/types, net/http, and runtime/cgo packages. See the Go 1.21.4 milestone on our issue tracker for details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.4+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.3...go1.21.4
from the security mailing:
[security] Go 1.21.4 and Go 1.20.11 are released
Hello gophers,
We have just released Go versions 1.21.4 and 1.20.11, minor point releases.
These minor releases include 2 security fixes following the security policy:
- path/filepath: recognize `\??\` as a Root Local Device path prefix.
On Windows, a path beginning with `\??\` is a Root Local Device path equivalent
to a path beginning with `\\?\`. Paths with a `\??\` prefix may be used to
access arbitrary locations on the system. For example, the path `\??\c:\x`
is equivalent to the more common path c:\x.
The filepath package did not recognize paths with a `\??\` prefix as special.
Clean could convert a rooted path such as `\a\..\??\b` into
the root local device path `\??\b`. It will now convert this
path into `.\??\b`.
`IsAbs` did not report paths beginning with `\??\` as absolute.
It now does so.
VolumeName now reports the `\??\` prefix as a volume name.
`Join(`\`, `??`, `b`)` could convert a seemingly innocent
sequence of path elements into the root local device path
`\??\b`. It will now convert this to `\.\??\b`.
This is CVE-2023-45283 and https://go.dev/issue/63713.
- path/filepath: recognize device names with trailing spaces and superscripts
The `IsLocal` function did not correctly detect reserved names in some cases:
- reserved names followed by spaces, such as "COM1 ".
- "COM" or "LPT" followed by a superscript 1, 2, or 3.
`IsLocal` now correctly reports these names as non-local.
This is CVE-2023-45284 and https://go.dev/issue/63713.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This also moves `musl-dev` to the alpine-base stage, due to changes in
Alpine 3.18 causing gotestsum build to fail because stdlib.h was missing;
#17 5.065 # runtime/cgo
#17 5.065 In file included from _cgo_export.c:3:
#17 5.065 /usr/include/fortify/stdlib.h:23:15: fatal error: stdlib.h: No such file or directory
#17 5.065 23 | #include_next <stdlib.h>
#17 5.065 | ^~~~~~~~~~
alpine 3.17:
/ # find / | grep stdlib.h
/usr/include/c++/12.2.1/tr1/stdlib.h
/usr/include/c++/12.2.1/stdlib.h
alpine 3.18
/ # find / | grep stdlib.h
/usr/lib/llvm16/lib/clang/16/include/__clang_hip_stdlib.h
/usr/include/fortify/stdlib.h
/usr/include/c++/12.2.1/tr1/stdlib.h
/usr/include/c++/12.2.1/stdlib.h
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Unfortunately, the go1.21.4 security update exposed some regressions / breaking
changes in moby (docker engine) and containerd. These issues are looked into,
but in the meantime we should revert this patch.
This temporarily reintroduces CVE-2023-45284 and CVE-2023-45283.
This reverts commit 6472dabe4c.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.4 (released 2023-11-07) includes security fixes to the path/filepath
package, as well as bug fixes to the linker, the runtime, the compiler, and
the go/types, net/http, and runtime/cgo packages. See the Go 1.21.4 milestone
on our issue tracker for details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.4+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.3...go1.21.4
from the security mailing:
[security] Go 1.21.4 and Go 1.20.11 are released
Hello gophers,
We have just released Go versions 1.21.4 and 1.20.11, minor point releases.
These minor releases include 2 security fixes following the security policy:
- path/filepath: recognize `\??\` as a Root Local Device path prefix.
On Windows, a path beginning with `\??\` is a Root Local Device path equivalent
to a path beginning with `\\?\`. Paths with a `\??\` prefix may be used to
access arbitrary locations on the system. For example, the path `\??\c:\x`
is equivalent to the more common path c:\x.
The filepath package did not recognize paths with a `\??\` prefix as special.
Clean could convert a rooted path such as `\a\..\??\b` into
the root local device path `\??\b`. It will now convert this
path into `.\??\b`.
`IsAbs` did not report paths beginning with `\??\` as absolute.
It now does so.
VolumeName now reports the `\??\` prefix as a volume name.
`Join(`\`, `??`, `b`)` could convert a seemingly innocent
sequence of path elements into the root local device path
`\??\b`. It will now convert this to `\.\??\b`.
This is CVE-2023-45283 and https://go.dev/issue/63713.
- path/filepath: recognize device names with trailing spaces and superscripts
The `IsLocal` function did not correctly detect reserved names in some cases:
- reserved names followed by spaces, such as "COM1 ".
- "COM" or "LPT" followed by a superscript 1, 2, or 3.
`IsLocal` now correctly reports these names as non-local.
This is CVE-2023-45284 and https://go.dev/issue/63713.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.3 (released 2023-10-10) includes a security fix to the net/http package.
See the Go 1.21.3 milestone on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.21.3+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.21.2...go1.21.3
From the security mailing:
[security] Go 1.21.3 and Go 1.20.10 are released
Hello gophers,
We have just released Go versions 1.21.3 and 1.20.10, minor point releases.
These minor releases include 1 security fixes following the security policy:
- net/http: rapid stream resets can cause excessive work
A malicious HTTP/2 client which rapidly creates requests and
immediately resets them can cause excessive server resource consumption.
While the total number of requests is bounded to the
http2.Server.MaxConcurrentStreams setting, resetting an in-progress
request allows the attacker to create a new request while the existing
one is still executing.
HTTP/2 servers now bound the number of simultaneously executing
handler goroutines to the stream concurrency limit. New requests
arriving when at the limit (which can only happen after the client
has reset an existing, in-flight request) will be queued until a
handler exits. If the request queue grows too large, the server
will terminate the connection.
This issue is also fixed in golang.org/x/net/http2 v0.17.0,
for users manually configuring HTTP/2.
The default stream concurrency limit is 250 streams (requests)
per HTTP/2 connection. This value may be adjusted using the
golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams
setting and the ConfigureServer function.
This is CVE-2023-39325 and Go issue https://go.dev/issue/63417.
This is also tracked by CVE-2023-44487.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.2 (released 2023-10-05) includes one security fixes to the cmd/go package,
as well as bug fixes to the compiler, the go command, the linker, the runtime,
and the runtime/metrics package. See the Go 1.21.2 milestone on our issue
tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.21.2+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.21.1...go1.21.2
From the security mailing:
[security] Go 1.21.2 and Go 1.20.9 are released
Hello gophers,
We have just released Go versions 1.21.2 and 1.20.9, minor point releases.
These minor releases include 1 security fixes following the security policy:
- cmd/go: line directives allows arbitrary execution during build
"//line" directives can be used to bypass the restrictions on "//go:cgo_"
directives, allowing blocked linker and compiler flags to be passed during
compliation. This can result in unexpected execution of arbitrary code when
running "go build". The line directive requires the absolute path of the file in
which the directive lives, which makes exploting this issue significantly more
complex.
This is CVE-2023-39323 and Go issue https://go.dev/issue/63211.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This may find its way into the official images, but until it does, let's
make sure we don't get unexpected updates of go.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.8 (released 2023-09-06) includes two security fixes to the html/template
package, as well as bug fixes to the compiler, the go command, the runtime,
and the crypto/tls, go/types, net/http, and path/filepath packages. See the
Go 1.20.8 milestone on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.20.8+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.20.7...go1.20.8
From the security mailing:
[security] Go 1.21.1 and Go 1.20.8 are released
Hello gophers,
We have just released Go versions 1.21.1 and 1.20.8, minor point releases.
These minor releases include 4 security fixes following the security policy:
- cmd/go: go.mod toolchain directive allows arbitrary execution
The go.mod toolchain directive, introduced in Go 1.21, could be leveraged to
execute scripts and binaries relative to the root of the module when the "go"
command was executed within the module. This applies to modules downloaded using
the "go" command from the module proxy, as well as modules downloaded directly
using VCS software.
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-39320 and Go issue https://go.dev/issue/62198.
- html/template: improper handling of HTML-like comments within script contexts
The html/template package did not properly handle HMTL-like "<!--" and "-->"
comment tokens, nor hashbang "#!" comment tokens, in <script> contexts. This may
cause the template parser to improperly interpret the contents of <script>
contexts, causing actions to be improperly escaped. This could be leveraged to
perform an XSS attack.
Thanks to Takeshi Kaneko (GMO Cybersecurity by Ierae, Inc.) for reporting this
issue.
This is CVE-2023-39318 and Go issue https://go.dev/issue/62196.
- html/template: improper handling of special tags within script contexts
The html/template package did not apply the proper rules for handling occurrences
of "<script", "<!--", and "</script" within JS literals in <script> contexts.
This may cause the template parser to improperly consider script contexts to be
terminated early, causing actions to be improperly escaped. This could be
leveraged to perform an XSS attack.
Thanks to Takeshi Kaneko (GMO Cybersecurity by Ierae, Inc.) for reporting this
issue.
This is CVE-2023-39319 and Go issue https://go.dev/issue/62197.
- crypto/tls: panic when processing post-handshake message on QUIC connections
Processing an incomplete post-handshake message for a QUIC connection caused a panic.
Thanks to Marten Seemann for reporting this issue.
This is CVE-2023-39321 and CVE-2023-39322 and Go issue https://go.dev/issue/62266.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Includes a fix for CVE-2023-29409
go1.20.7 (released 2023-08-01) includes a security fix to the crypto/tls
package, as well as bug fixes to the assembler and the compiler. See the
Go 1.20.7 milestone on our issue tracker for details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.20.7+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.20.6...go1.20.7
From the mailing list announcement:
[security] Go 1.20.7 and Go 1.19.12 are released
Hello gophers,
We have just released Go versions 1.20.7 and 1.19.12, minor point releases.
These minor releases include 1 security fixes following the security policy:
- crypto/tls: restrict RSA keys in certificates to <= 8192 bits
Extremely large RSA keys in certificate chains can cause a client/server
to expend significant CPU time verifying signatures. Limit this by
restricting the size of RSA keys transmitted during handshakes to <=
8192 bits.
Based on a survey of publicly trusted RSA keys, there are currently only
three certificates in circulation with keys larger than this, and all
three appear to be test certificates that are not actively deployed. It
is possible there are larger keys in use in private PKIs, but we target
the web PKI, so causing breakage here in the interests of increasing the
default safety of users of crypto/tls seems reasonable.
Thanks to Mateusz Poliwczak for reporting this issue.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.20.7
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
update the version we use in the dev-container;
- Fix a regression for bake where services in profiles would not be loaded.
- Fix a regression where --cgroup-parent option had no effect during build.
- Fix a regression where valid docker contexts could fail buildx builder name validation.
- Fix an issue where the host-gateway special address could not be used as an argument to --add-host.
- Fix a possible panic when terminal is resized during the build.
release notes: https://github.com/docker/buildx/releases/tag/v0.11.1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.6 (released 2023-07-11) includes a security fix to the net/http package,
as well as bug fixes to the compiler, cgo, the cover tool, the go command,
the runtime, and the crypto/ecdsa, go/build, go/printer, net/mail, and text/template
packages. See the Go 1.20.6 milestone on our issue tracker for details.
https://github.com/golang/go/issues?q=milestone%3AGo1.20.6+label%3ACherryPickApproved
Full diff: https://github.com/golang/go/compare/go1.20.5...go1.20.6
These minor releases include 1 security fixes following the security policy:
net/http: insufficient sanitization of Host header
The HTTP/1 client did not fully validate the contents of the Host header.
A maliciously crafted Host header could inject additional headers or entire
requests. The HTTP/1 client now refuses to send requests containing an
invalid Request.Host or Request.URL.Host value.
Thanks to Bartek Nowotarski for reporting this issue.
Includes security fixes for [CVE-2023-29406 ][1] and Go issue https://go.dev/issue/60374
[1]: https://github.com/advisories/GHSA-f8f7-69v5-w4vx
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.20.5 (released 2023-06-06) includes four security fixes to the cmd/go and
runtime packages, as well as bug fixes to the compiler, the go command, the
runtime, and the crypto/rsa, net, and os packages. See the Go 1.20.5 milestone
on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.20.5+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.20.4...go1.20.5
These minor releases include 3 security fixes following the security policy:
- cmd/go: cgo code injection
The go command may generate unexpected code at build time when using cgo. This
may result in unexpected behavior when running a go program which uses cgo.
This may occur when running an untrusted module which contains directories with
newline characters in their names. Modules which are retrieved using the go command,
i.e. via "go get", are not affected (modules retrieved using GOPATH-mode, i.e.
GO111MODULE=off, may be affected).
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-29402 and Go issue https://go.dev/issue/60167.
- runtime: unexpected behavior of setuid/setgid binaries
The Go runtime didn't act any differently when a binary had the setuid/setgid
bit set. On Unix platforms, if a setuid/setgid binary was executed with standard
I/O file descriptors closed, opening any files could result in unexpected
content being read/written with elevated prilieges. Similarly if a setuid/setgid
program was terminated, either via panic or signal, it could leak the contents
of its registers.
Thanks to Vincent Dehors from Synacktiv for reporting this issue.
This is CVE-2023-29403 and Go issue https://go.dev/issue/60272.
- cmd/go: improper sanitization of LDFLAGS
The go command may execute arbitrary code at build time when using cgo. This may
occur when running "go get" on a malicious module, or when running any other
command which builds untrusted code. This is can by triggered by linker flags,
specified via a "#cgo LDFLAGS" directive.
Thanks to Juho Nurminen of Mattermost for reporting this issue.
This is CVE-2023-29404 and CVE-2023-29405 and Go issues https://go.dev/issue/60305 and https://go.dev/issue/60306.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Official Golang images are now only available for 3.18 and 3.17;
3.18 doesn't look to play well with gotestsum, so sticking to
an older version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Paweł Gronowski
Sebastiaan van Stijn
Austin Vazquez
Grace Choi
Sebastiaan van Stijn
Bjorn Neergaard