Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
/*
|
|
|
|
|
* Packet protocol layer for the SSH-1 'connection protocol', i.e.
|
|
|
|
|
* everything after authentication finishes.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <assert.h>
|
|
|
|
|
|
|
|
|
|
#include "putty.h"
|
|
|
|
|
#include "ssh.h"
|
|
|
|
|
#include "sshbpp.h"
|
|
|
|
|
#include "sshppl.h"
|
|
|
|
|
#include "sshchan.h"
|
|
|
|
|
#include "sshcr.h"
|
|
|
|
|
|
|
|
|
|
struct ssh1_channel;
|
|
|
|
|
|
|
|
|
|
struct outstanding_succfail;
|
|
|
|
|
|
|
|
|
|
struct ssh1_connection_state {
|
|
|
|
|
int crState;
|
|
|
|
|
|
Get rid of lots of implicit pointer types.
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
2018-10-04 21:10:23 +03:00
|
|
|
Ssh *ssh;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
Conf *conf;
|
|
|
|
|
int local_protoflags;
|
|
|
|
|
|
|
|
|
|
tree234 *channels; /* indexed by local id */
|
|
|
|
|
|
2018-09-30 13:22:01 +03:00
|
|
|
/* In SSH-1, the main session doesn't take the form of a 'channel'
|
|
|
|
|
* according to the wire protocol. But we want to use the same API
|
|
|
|
|
* for it, so we define an SshChannel here - but one that uses a
|
|
|
|
|
* separate vtable from the usual one, so it doesn't map to a
|
|
|
|
|
* struct ssh1_channel as all the others do. */
|
|
|
|
|
SshChannel mainchan_sc;
|
|
|
|
|
Channel *mainchan_chan; /* the other end of mainchan_sc */
|
|
|
|
|
mainchan *mainchan; /* and its subtype */
|
|
|
|
|
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
int got_pty;
|
2018-09-30 13:22:01 +03:00
|
|
|
int ldisc_opts[LD_N_OPTIONS];
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
int stdout_throttling;
|
2018-09-30 13:22:01 +03:00
|
|
|
int want_user_input;
|
|
|
|
|
int session_terminated;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
int term_width, term_height, term_width_orig, term_height_orig;
|
|
|
|
|
|
|
|
|
|
int X11_fwd_enabled;
|
|
|
|
|
struct X11Display *x11disp;
|
|
|
|
|
struct X11FakeAuth *x11auth;
|
|
|
|
|
tree234 *x11authtree;
|
|
|
|
|
|
|
|
|
|
int agent_fwd_enabled;
|
|
|
|
|
|
|
|
|
|
tree234 *rportfwds;
|
|
|
|
|
PortFwdManager *portfwdmgr;
|
|
|
|
|
int portfwdmgr_configured;
|
|
|
|
|
|
|
|
|
|
int finished_setup;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* These store the list of requests that we're waiting for
|
|
|
|
|
* SSH_SMSG_{SUCCESS,FAILURE} replies to. (Those messages don't
|
|
|
|
|
* come with any indication of what they're in response to, so we
|
|
|
|
|
* have to keep track of the queue ourselves.)
|
|
|
|
|
*/
|
|
|
|
|
struct outstanding_succfail *succfail_head, *succfail_tail;
|
|
|
|
|
|
|
|
|
|
ConnectionLayer cl;
|
|
|
|
|
PacketProtocolLayer ppl;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int ssh1_rportfwd_cmp(void *av, void *bv)
|
|
|
|
|
{
|
|
|
|
|
struct ssh_rportfwd *a = (struct ssh_rportfwd *) av;
|
|
|
|
|
struct ssh_rportfwd *b = (struct ssh_rportfwd *) bv;
|
|
|
|
|
int i;
|
|
|
|
|
if ( (i = strcmp(a->dhost, b->dhost)) != 0)
|
|
|
|
|
return i < 0 ? -1 : +1;
|
|
|
|
|
if (a->dport > b->dport)
|
|
|
|
|
return +1;
|
|
|
|
|
if (a->dport < b->dport)
|
|
|
|
|
return -1;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_connection_free(PacketProtocolLayer *);
|
|
|
|
|
static void ssh1_connection_process_queue(PacketProtocolLayer *);
|
|
|
|
|
static void ssh1_connection_special_cmd(PacketProtocolLayer *ppl,
|
|
|
|
|
SessionSpecialCode code, int arg);
|
|
|
|
|
static int ssh1_connection_want_user_input(PacketProtocolLayer *ppl);
|
|
|
|
|
static void ssh1_connection_got_user_input(PacketProtocolLayer *ppl);
|
|
|
|
|
static void ssh1_connection_reconfigure(PacketProtocolLayer *ppl, Conf *conf);
|
|
|
|
|
|
|
|
|
|
static const struct PacketProtocolLayerVtable ssh1_connection_vtable = {
|
|
|
|
|
ssh1_connection_free,
|
|
|
|
|
ssh1_connection_process_queue,
|
|
|
|
|
ssh1_common_get_specials,
|
|
|
|
|
ssh1_connection_special_cmd,
|
|
|
|
|
ssh1_connection_want_user_input,
|
|
|
|
|
ssh1_connection_got_user_input,
|
|
|
|
|
ssh1_connection_reconfigure,
|
|
|
|
|
NULL /* no layer names in SSH-1 */,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static struct ssh_rportfwd *ssh1_rportfwd_alloc(
|
|
|
|
|
ConnectionLayer *cl,
|
|
|
|
|
const char *shost, int sport, const char *dhost, int dport,
|
|
|
|
|
int addressfamily, const char *log_description, PortFwdRecord *pfr,
|
|
|
|
|
ssh_sharing_connstate *share_ctx);
|
|
|
|
|
static void ssh1_rportfwd_remove(
|
|
|
|
|
ConnectionLayer *cl, struct ssh_rportfwd *rpf);
|
|
|
|
|
static SshChannel *ssh1_lportfwd_open(
|
|
|
|
|
ConnectionLayer *cl, const char *hostname, int port,
|
|
|
|
|
const char *org, Channel *chan);
|
2018-09-30 13:22:01 +03:00
|
|
|
static SshChannel *ssh1_session_open(ConnectionLayer *cl, Channel *chan);
|
|
|
|
|
static struct X11FakeAuth *ssh1_add_x11_display(
|
|
|
|
|
ConnectionLayer *cl, int authtype, struct X11Display *disp);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
static int ssh1_agent_forwarding_permitted(ConnectionLayer *cl);
|
|
|
|
|
static void ssh1_terminal_size(ConnectionLayer *cl, int width, int height);
|
|
|
|
|
static void ssh1_stdout_unthrottle(ConnectionLayer *cl, int bufsize);
|
|
|
|
|
static int ssh1_stdin_backlog(ConnectionLayer *cl);
|
|
|
|
|
static void ssh1_throttle_all_channels(ConnectionLayer *cl, int throttled);
|
|
|
|
|
static int ssh1_ldisc_option(ConnectionLayer *cl, int option);
|
2018-09-30 13:22:01 +03:00
|
|
|
static void ssh1_set_ldisc_option(ConnectionLayer *cl, int option, int value);
|
|
|
|
|
static void ssh1_enable_x_fwd(ConnectionLayer *cl);
|
|
|
|
|
static void ssh1_enable_agent_fwd(ConnectionLayer *cl);
|
|
|
|
|
static void ssh1_set_wants_user_input(ConnectionLayer *cl, int wanted);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
static const struct ConnectionLayerVtable ssh1_connlayer_vtable = {
|
|
|
|
|
ssh1_rportfwd_alloc,
|
|
|
|
|
ssh1_rportfwd_remove,
|
|
|
|
|
ssh1_lportfwd_open,
|
2018-09-30 13:22:01 +03:00
|
|
|
ssh1_session_open,
|
|
|
|
|
ssh1_add_x11_display,
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
NULL /* add_sharing_x11_display */,
|
|
|
|
|
NULL /* remove_sharing_x11_display */,
|
|
|
|
|
NULL /* send_packet_from_downstream */,
|
|
|
|
|
NULL /* alloc_sharing_channel */,
|
|
|
|
|
NULL /* delete_sharing_channel */,
|
|
|
|
|
NULL /* sharing_queue_global_request */,
|
2018-09-28 22:52:36 +03:00
|
|
|
NULL /* sharing_no_more_downstreams */,
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
ssh1_agent_forwarding_permitted,
|
|
|
|
|
ssh1_terminal_size,
|
|
|
|
|
ssh1_stdout_unthrottle,
|
|
|
|
|
ssh1_stdin_backlog,
|
|
|
|
|
ssh1_throttle_all_channels,
|
|
|
|
|
ssh1_ldisc_option,
|
2018-09-30 13:22:01 +03:00
|
|
|
ssh1_set_ldisc_option,
|
|
|
|
|
ssh1_enable_x_fwd,
|
|
|
|
|
ssh1_enable_agent_fwd,
|
|
|
|
|
ssh1_set_wants_user_input,
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct ssh1_channel {
|
|
|
|
|
struct ssh1_connection_state *connlayer;
|
|
|
|
|
|
|
|
|
|
unsigned remoteid, localid;
|
|
|
|
|
int type;
|
|
|
|
|
/* True if we opened this channel but server hasn't confirmed. */
|
|
|
|
|
int halfopen;
|
|
|
|
|
|
|
|
|
|
/* Bitmap of whether we've sent/received CHANNEL_CLOSE and
|
|
|
|
|
* CHANNEL_CLOSE_CONFIRMATION. */
|
|
|
|
|
#define CLOSES_SENT_CLOSE 1
|
|
|
|
|
#define CLOSES_SENT_CLOSECONF 2
|
|
|
|
|
#define CLOSES_RCVD_CLOSE 4
|
|
|
|
|
#define CLOSES_RCVD_CLOSECONF 8
|
|
|
|
|
int closes;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* This flag indicates that an EOF is pending on the outgoing side
|
|
|
|
|
* of the channel: that is, wherever we're getting the data for
|
|
|
|
|
* this channel has sent us some data followed by EOF. We can't
|
|
|
|
|
* actually send the EOF until we've finished sending the data, so
|
|
|
|
|
* we set this flag instead to remind us to do so once our buffer
|
|
|
|
|
* is clear.
|
|
|
|
|
*/
|
|
|
|
|
int pending_eof;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* True if this channel is causing the underlying connection to be
|
|
|
|
|
* throttled.
|
|
|
|
|
*/
|
|
|
|
|
int throttling_conn;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* True if we currently have backed-up data on the direction of
|
|
|
|
|
* this channel pointing out of the SSH connection, and therefore
|
|
|
|
|
* would prefer the 'Channel' implementation not to read further
|
|
|
|
|
* local input if possible.
|
|
|
|
|
*/
|
|
|
|
|
int throttled_by_backlog;
|
|
|
|
|
|
|
|
|
|
Channel *chan; /* handle the client side of this channel, if not */
|
|
|
|
|
SshChannel sc; /* entry point for chan to talk back to */
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int ssh1channel_write(SshChannel *c, const void *buf, int len);
|
|
|
|
|
static void ssh1channel_write_eof(SshChannel *c);
|
2018-10-13 12:30:03 +03:00
|
|
|
static void ssh1channel_initiate_close(SshChannel *c, const char *err);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
static void ssh1channel_unthrottle(SshChannel *c, int bufsize);
|
|
|
|
|
static Conf *ssh1channel_get_conf(SshChannel *c);
|
2018-10-13 18:30:59 +03:00
|
|
|
static void ssh1channel_window_override_removed(SshChannel *c) { /* ignore */ }
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
static const struct SshChannelVtable ssh1channel_vtable = {
|
|
|
|
|
ssh1channel_write,
|
|
|
|
|
ssh1channel_write_eof,
|
2018-10-13 12:30:03 +03:00
|
|
|
ssh1channel_initiate_close,
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
ssh1channel_unthrottle,
|
|
|
|
|
ssh1channel_get_conf,
|
2018-10-13 18:30:59 +03:00
|
|
|
ssh1channel_window_override_removed,
|
2018-09-26 20:02:33 +03:00
|
|
|
NULL /* x11_sharing_handover is only used by SSH-2 connection sharing */,
|
|
|
|
|
NULL /* request_x11_forwarding */,
|
|
|
|
|
NULL /* request_agent_forwarding */,
|
|
|
|
|
NULL /* request_pty */,
|
|
|
|
|
NULL /* send_env_var */,
|
|
|
|
|
NULL /* start_shell */,
|
|
|
|
|
NULL /* start_command */,
|
|
|
|
|
NULL /* start_subsystem */,
|
|
|
|
|
NULL /* send_serial_break */,
|
|
|
|
|
NULL /* send_signal */,
|
|
|
|
|
NULL /* send_terminal_size_change */,
|
|
|
|
|
NULL /* hint_channel_is_simple */,
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
};
|
|
|
|
|
|
2018-09-30 13:22:01 +03:00
|
|
|
static void ssh1mainchan_request_x11_forwarding(
|
|
|
|
|
SshChannel *c, int want_reply, const char *authproto,
|
|
|
|
|
const char *authdata, int screen_number, int oneshot);
|
|
|
|
|
static void ssh1mainchan_request_agent_forwarding(
|
|
|
|
|
SshChannel *c, int want_reply);
|
|
|
|
|
static void ssh1mainchan_request_pty(
|
|
|
|
|
SshChannel *c, int want_reply, Conf *conf, int w, int h);
|
|
|
|
|
static int ssh1mainchan_send_env_var(
|
|
|
|
|
SshChannel *c, int want_reply, const char *var, const char *value);
|
|
|
|
|
static void ssh1mainchan_start_shell(
|
|
|
|
|
SshChannel *c, int want_reply);
|
|
|
|
|
static void ssh1mainchan_start_command(
|
|
|
|
|
SshChannel *c, int want_reply, const char *command);
|
|
|
|
|
static int ssh1mainchan_start_subsystem(
|
|
|
|
|
SshChannel *c, int want_reply, const char *subsystem);
|
|
|
|
|
static int ssh1mainchan_send_env_var(
|
|
|
|
|
SshChannel *c, int want_reply, const char *var, const char *value);
|
|
|
|
|
static int ssh1mainchan_send_serial_break(
|
|
|
|
|
SshChannel *c, int want_reply, int length);
|
|
|
|
|
static int ssh1mainchan_send_signal(
|
|
|
|
|
SshChannel *c, int want_reply, const char *signame);
|
|
|
|
|
static void ssh1mainchan_send_terminal_size_change(
|
|
|
|
|
SshChannel *c, int w, int h);
|
|
|
|
|
static void ssh1mainchan_hint_channel_is_simple(SshChannel *c);
|
|
|
|
|
static int ssh1mainchan_write(SshChannel *sc, const void *data, int len);
|
|
|
|
|
static void ssh1mainchan_write_eof(SshChannel *sc);
|
|
|
|
|
|
|
|
|
|
static const struct SshChannelVtable ssh1mainchan_vtable = {
|
|
|
|
|
ssh1mainchan_write,
|
|
|
|
|
ssh1mainchan_write_eof,
|
|
|
|
|
NULL /* unclean_close */,
|
|
|
|
|
NULL /* unthrottle */,
|
|
|
|
|
NULL /* get_conf */,
|
|
|
|
|
NULL /* window_override_removed is only used by SSH-2 sharing */,
|
|
|
|
|
NULL /* x11_sharing_handover, likewise */,
|
|
|
|
|
ssh1mainchan_request_x11_forwarding,
|
|
|
|
|
ssh1mainchan_request_agent_forwarding,
|
|
|
|
|
ssh1mainchan_request_pty,
|
|
|
|
|
ssh1mainchan_send_env_var,
|
|
|
|
|
ssh1mainchan_start_shell,
|
|
|
|
|
ssh1mainchan_start_command,
|
|
|
|
|
ssh1mainchan_start_subsystem,
|
|
|
|
|
ssh1mainchan_send_serial_break,
|
|
|
|
|
ssh1mainchan_send_signal,
|
|
|
|
|
ssh1mainchan_send_terminal_size_change,
|
|
|
|
|
ssh1mainchan_hint_channel_is_simple,
|
|
|
|
|
};
|
|
|
|
|
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
static void ssh1_channel_init(struct ssh1_channel *c);
|
|
|
|
|
static void ssh1_channel_try_eof(struct ssh1_channel *c);
|
|
|
|
|
static void ssh1_channel_close_local(struct ssh1_channel *c,
|
|
|
|
|
const char *reason);
|
|
|
|
|
static void ssh1_channel_destroy(struct ssh1_channel *c);
|
|
|
|
|
static void ssh1_channel_check_close(struct ssh1_channel *c);
|
|
|
|
|
|
|
|
|
|
static int ssh1_check_termination(struct ssh1_connection_state *s);
|
|
|
|
|
|
|
|
|
|
typedef void (*sf_handler_fn_t)(struct ssh1_connection_state *s,
|
2018-09-30 13:22:01 +03:00
|
|
|
int success, void *ctx);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
struct outstanding_succfail {
|
|
|
|
|
sf_handler_fn_t handler;
|
|
|
|
|
void *ctx;
|
|
|
|
|
struct outstanding_succfail *next;
|
2018-09-30 13:22:01 +03:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The 'trivial' flag is set if this handler is in response to a
|
|
|
|
|
* request for which the SSH-1 protocol doesn't actually specify a
|
|
|
|
|
* response packet. The client of this system (mainchan.c) will
|
|
|
|
|
* expect to get an acknowledgment regardless, so we arrange to
|
|
|
|
|
* send that ack immediately after the rest of the queue empties.
|
|
|
|
|
*/
|
|
|
|
|
int trivial;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
};
|
2018-09-30 13:22:01 +03:00
|
|
|
|
|
|
|
|
static void ssh1_connection_process_trivial_succfails(void *vs);
|
|
|
|
|
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
static void ssh1_queue_succfail_handler(
|
2018-09-30 13:22:01 +03:00
|
|
|
struct ssh1_connection_state *s, sf_handler_fn_t handler, void *ctx,
|
|
|
|
|
int trivial)
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
{
|
|
|
|
|
struct outstanding_succfail *osf =
|
|
|
|
|
snew(struct outstanding_succfail);
|
|
|
|
|
osf->handler = handler;
|
|
|
|
|
osf->ctx = ctx;
|
2018-09-30 13:22:01 +03:00
|
|
|
osf->trivial = trivial;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
if (s->succfail_tail)
|
|
|
|
|
s->succfail_tail->next = osf;
|
|
|
|
|
else
|
|
|
|
|
s->succfail_head = osf;
|
|
|
|
|
s->succfail_tail = osf;
|
2018-09-30 13:22:01 +03:00
|
|
|
|
|
|
|
|
/* In case this one was trivial and the queue was already empty,
|
|
|
|
|
* we should make sure we run the handler promptly, and the
|
|
|
|
|
* easiest way is to queue it anyway and then run a trivials pass
|
|
|
|
|
* by callback. */
|
|
|
|
|
queue_toplevel_callback(ssh1_connection_process_trivial_succfails, s);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_connection_process_succfail(
|
|
|
|
|
struct ssh1_connection_state *s, int success)
|
|
|
|
|
{
|
|
|
|
|
struct outstanding_succfail *prevhead = s->succfail_head;
|
|
|
|
|
s->succfail_head = s->succfail_head->next;
|
|
|
|
|
prevhead->handler(s, success, prevhead->ctx);
|
|
|
|
|
sfree(prevhead);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_connection_process_trivial_succfails(void *vs)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s = (struct ssh1_connection_state *)vs;
|
|
|
|
|
while (s->succfail_head && s->succfail_head->trivial)
|
|
|
|
|
ssh1_connection_process_succfail(s, TRUE);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1_channelcmp(void *av, void *bv)
|
|
|
|
|
{
|
|
|
|
|
const struct ssh1_channel *a = (const struct ssh1_channel *) av;
|
|
|
|
|
const struct ssh1_channel *b = (const struct ssh1_channel *) bv;
|
|
|
|
|
if (a->localid < b->localid)
|
|
|
|
|
return -1;
|
|
|
|
|
if (a->localid > b->localid)
|
|
|
|
|
return +1;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1_channelfind(void *av, void *bv)
|
|
|
|
|
{
|
|
|
|
|
const unsigned *a = (const unsigned *) av;
|
|
|
|
|
const struct ssh1_channel *b = (const struct ssh1_channel *) bv;
|
|
|
|
|
if (*a < b->localid)
|
|
|
|
|
return -1;
|
|
|
|
|
if (*a > b->localid)
|
|
|
|
|
return +1;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_channel_free(struct ssh1_channel *c)
|
|
|
|
|
{
|
|
|
|
|
if (c->chan)
|
|
|
|
|
chan_free(c->chan);
|
|
|
|
|
sfree(c);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
PacketProtocolLayer *ssh1_connection_new(
|
Get rid of lots of implicit pointer types.
All the main backend structures - Ssh, Telnet, Pty, Serial etc - now
describe structure types themselves rather than pointers to them. The
same goes for the codebase-wide trait types Socket and Plug, and the
supporting types SockAddr and Pinger.
All those things that were typedefed as pointers are older types; the
newer ones have the explicit * at the point of use, because that's
what I now seem to be preferring. But whichever one of those is
better, inconsistently using a mixture of the two styles is worse, so
let's make everything consistent.
A few types are still implicitly pointers, such as Bignum and some of
the GSSAPI types; generally this is either because they have to be
void *, or because they're typedefed differently on different
platforms and aren't always pointers at all. Can't be helped. But I've
got rid of the main ones, at least.
2018-10-04 21:10:23 +03:00
|
|
|
Ssh *ssh, Conf *conf, ConnectionLayer **cl_out)
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s = snew(struct ssh1_connection_state);
|
|
|
|
|
memset(s, 0, sizeof(*s));
|
|
|
|
|
s->ppl.vt = &ssh1_connection_vtable;
|
|
|
|
|
|
|
|
|
|
s->conf = conf_copy(conf);
|
|
|
|
|
|
|
|
|
|
s->channels = newtree234(ssh1_channelcmp);
|
|
|
|
|
|
|
|
|
|
s->x11authtree = newtree234(x11_authcmp);
|
|
|
|
|
|
Refactor the LogContext type.
LogContext is now the owner of the logevent() function that back ends
and so forth are constantly calling. Previously, logevent was owned by
the Frontend, which would store the message into its list for the GUI
Event Log dialog (or print it to standard error, or whatever) and then
pass it _back_ to LogContext to write to the currently open log file.
Now it's the other way round: LogContext gets the message from the
back end first, writes it to its log file if it feels so inclined, and
communicates it back to the front end.
This means that lots of parts of the back end system no longer need to
have a pointer to a full-on Frontend; the only thing they needed it
for was logging, so now they just have a LogContext (which many of
them had to have anyway, e.g. for logging SSH packets or session
traffic).
LogContext itself also doesn't get a full Frontend pointer any more:
it now talks back to the front end via a little vtable of its own
called LogPolicy, which contains the method that passes Event Log
entries through, the old askappend() function that decides whether to
truncate a pre-existing log file, and an emergency function for
printing an especially prominent message if the log file can't be
created. One minor nice effect of this is that console and GUI apps
can implement that last function subtly differently, so that Unix
console apps can write it with a plain \n instead of the \r\n
(harmless but inelegant) that the old centralised implementation
generated.
One other consequence of this is that the LogContext has to be
provided to backend_init() so that it's available to backends from the
instant of creation, rather than being provided via a separate API
call a couple of function calls later, because backends have typically
started doing things that need logging (like making network
connections) before the call to backend_provide_logctx. Fortunately,
there's no case in the whole code base where we don't already have
logctx by the time we make a backend (so I don't actually remember why
I ever delayed providing one). So that shortens the backend API by one
function, which is always nice.
While I'm tidying up, I've also moved the printf-style logeventf() and
the handy logevent_and_free() into logging.c, instead of having copies
of them scattered around other places. This has also let me remove
some stub functions from a couple of outlying applications like
Pageant. Finally, I've removed the pointless "_tag" at the end of
LogContext's official struct name.
2018-10-10 21:26:18 +03:00
|
|
|
/* Need to get the log context for s->cl now, because we won't be
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
* helpfully notified when a copy is written into s->ppl by our
|
|
|
|
|
* owner. */
|
|
|
|
|
s->cl.vt = &ssh1_connlayer_vtable;
|
Refactor the LogContext type.
LogContext is now the owner of the logevent() function that back ends
and so forth are constantly calling. Previously, logevent was owned by
the Frontend, which would store the message into its list for the GUI
Event Log dialog (or print it to standard error, or whatever) and then
pass it _back_ to LogContext to write to the currently open log file.
Now it's the other way round: LogContext gets the message from the
back end first, writes it to its log file if it feels so inclined, and
communicates it back to the front end.
This means that lots of parts of the back end system no longer need to
have a pointer to a full-on Frontend; the only thing they needed it
for was logging, so now they just have a LogContext (which many of
them had to have anyway, e.g. for logging SSH packets or session
traffic).
LogContext itself also doesn't get a full Frontend pointer any more:
it now talks back to the front end via a little vtable of its own
called LogPolicy, which contains the method that passes Event Log
entries through, the old askappend() function that decides whether to
truncate a pre-existing log file, and an emergency function for
printing an especially prominent message if the log file can't be
created. One minor nice effect of this is that console and GUI apps
can implement that last function subtly differently, so that Unix
console apps can write it with a plain \n instead of the \r\n
(harmless but inelegant) that the old centralised implementation
generated.
One other consequence of this is that the LogContext has to be
provided to backend_init() so that it's available to backends from the
instant of creation, rather than being provided via a separate API
call a couple of function calls later, because backends have typically
started doing things that need logging (like making network
connections) before the call to backend_provide_logctx. Fortunately,
there's no case in the whole code base where we don't already have
logctx by the time we make a backend (so I don't actually remember why
I ever delayed providing one). So that shortens the backend API by one
function, which is always nice.
While I'm tidying up, I've also moved the printf-style logeventf() and
the handy logevent_and_free() into logging.c, instead of having copies
of them scattered around other places. This has also let me remove
some stub functions from a couple of outlying applications like
Pageant. Finally, I've removed the pointless "_tag" at the end of
LogContext's official struct name.
2018-10-10 21:26:18 +03:00
|
|
|
s->cl.logctx = ssh_get_logctx(ssh);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
s->portfwdmgr = portfwdmgr_new(&s->cl);
|
|
|
|
|
s->rportfwds = newtree234(ssh1_rportfwd_cmp);
|
|
|
|
|
|
|
|
|
|
*cl_out = &s->cl;
|
|
|
|
|
return &s->ppl;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_connection_free(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh1_connection_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
struct X11FakeAuth *auth;
|
|
|
|
|
struct ssh1_channel *c;
|
|
|
|
|
struct ssh_rportfwd *rpf;
|
|
|
|
|
|
|
|
|
|
conf_free(s->conf);
|
|
|
|
|
|
|
|
|
|
while ((c = delpos234(s->channels, 0)) != NULL)
|
|
|
|
|
ssh1_channel_free(c);
|
|
|
|
|
freetree234(s->channels);
|
|
|
|
|
|
|
|
|
|
if (s->x11disp)
|
|
|
|
|
x11_free_display(s->x11disp);
|
|
|
|
|
while ((auth = delpos234(s->x11authtree, 0)) != NULL)
|
|
|
|
|
x11_free_fake_auth(auth);
|
|
|
|
|
freetree234(s->x11authtree);
|
|
|
|
|
|
|
|
|
|
while ((rpf = delpos234(s->rportfwds, 0)) != NULL)
|
|
|
|
|
free_rportfwd(rpf);
|
|
|
|
|
freetree234(s->rportfwds);
|
|
|
|
|
portfwdmgr_free(s->portfwdmgr);
|
|
|
|
|
|
2018-09-30 13:22:01 +03:00
|
|
|
delete_callbacks_for_context(s);
|
|
|
|
|
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
sfree(s);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void ssh1_connection_set_local_protoflags(PacketProtocolLayer *ppl, int flags)
|
|
|
|
|
{
|
|
|
|
|
assert(ppl->vt == &ssh1_connection_vtable);
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh1_connection_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
s->local_protoflags = flags;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1_connection_filter_queue(struct ssh1_connection_state *s)
|
|
|
|
|
{
|
|
|
|
|
PktIn *pktin;
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
ptrlen data, host;
|
|
|
|
|
struct ssh1_channel *c;
|
|
|
|
|
unsigned localid, remid;
|
|
|
|
|
int port, expect_halfopen;
|
|
|
|
|
struct ssh_rportfwd pf, *pfp;
|
|
|
|
|
PacketProtocolLayer *ppl = &s->ppl; /* for ppl_logevent */
|
|
|
|
|
|
|
|
|
|
/* Cross-reference to ssh1login.c to handle the common packets
|
|
|
|
|
* between login and connection: DISCONNECT, DEBUG and IGNORE. */
|
|
|
|
|
extern int ssh1_common_filter_queue(PacketProtocolLayer *ppl);
|
|
|
|
|
|
|
|
|
|
while (1) {
|
|
|
|
|
if (ssh1_common_filter_queue(&s->ppl))
|
|
|
|
|
return TRUE;
|
|
|
|
|
if ((pktin = pq_peek(s->ppl.in_pq)) == NULL)
|
|
|
|
|
return FALSE;
|
|
|
|
|
|
|
|
|
|
switch (pktin->type) {
|
|
|
|
|
case SSH1_SMSG_SUCCESS:
|
|
|
|
|
case SSH1_SMSG_FAILURE:
|
|
|
|
|
if (!s->finished_setup) {
|
|
|
|
|
/* During initial setup, these messages are not
|
|
|
|
|
* filtered out, but go back to the main coroutine. */
|
|
|
|
|
return FALSE;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (!s->succfail_head) {
|
|
|
|
|
ssh_remote_error(s->ppl.ssh,
|
|
|
|
|
"Received %s with no outstanding request",
|
|
|
|
|
ssh1_pkt_type(pktin->type));
|
|
|
|
|
return TRUE;
|
|
|
|
|
}
|
|
|
|
|
|
2018-09-30 13:22:01 +03:00
|
|
|
ssh1_connection_process_succfail(
|
|
|
|
|
s, pktin->type == SSH1_SMSG_SUCCESS);
|
|
|
|
|
queue_toplevel_callback(
|
|
|
|
|
ssh1_connection_process_trivial_succfails, s);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
pq_pop(s->ppl.in_pq);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SSH1_SMSG_X11_OPEN:
|
|
|
|
|
remid = get_uint32(pktin);
|
|
|
|
|
|
|
|
|
|
/* Refuse if X11 forwarding is disabled. */
|
|
|
|
|
if (!s->X11_fwd_enabled) {
|
|
|
|
|
pktout = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_MSG_CHANNEL_OPEN_FAILURE);
|
|
|
|
|
put_uint32(pktout, remid);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
ppl_logevent(("Rejected X11 connect request"));
|
|
|
|
|
} else {
|
|
|
|
|
c = snew(struct ssh1_channel);
|
|
|
|
|
c->connlayer = s;
|
|
|
|
|
ssh1_channel_init(c);
|
|
|
|
|
c->remoteid = remid;
|
|
|
|
|
c->chan = x11_new_channel(s->x11authtree, &c->sc,
|
|
|
|
|
NULL, -1, FALSE);
|
|
|
|
|
c->remoteid = remid;
|
|
|
|
|
c->halfopen = FALSE;
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION);
|
|
|
|
|
put_uint32(pktout, c->remoteid);
|
|
|
|
|
put_uint32(pktout, c->localid);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
ppl_logevent(("Opened X11 forward channel"));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pq_pop(s->ppl.in_pq);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SSH1_SMSG_AGENT_OPEN:
|
|
|
|
|
remid = get_uint32(pktin);
|
|
|
|
|
|
|
|
|
|
/* Refuse if agent forwarding is disabled. */
|
|
|
|
|
if (!s->agent_fwd_enabled) {
|
|
|
|
|
pktout = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_MSG_CHANNEL_OPEN_FAILURE);
|
|
|
|
|
put_uint32(pktout, remid);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
} else {
|
|
|
|
|
c = snew(struct ssh1_channel);
|
|
|
|
|
c->connlayer = s;
|
|
|
|
|
ssh1_channel_init(c);
|
|
|
|
|
c->remoteid = remid;
|
|
|
|
|
c->chan = agentf_new(&c->sc);
|
|
|
|
|
c->halfopen = FALSE;
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION);
|
|
|
|
|
put_uint32(pktout, c->remoteid);
|
|
|
|
|
put_uint32(pktout, c->localid);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pq_pop(s->ppl.in_pq);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SSH1_MSG_PORT_OPEN:
|
|
|
|
|
remid = get_uint32(pktin);
|
|
|
|
|
host = get_string(pktin);
|
|
|
|
|
port = toint(get_uint32(pktin));
|
|
|
|
|
|
|
|
|
|
pf.dhost = mkstr(host);
|
|
|
|
|
pf.dport = port;
|
|
|
|
|
pfp = find234(s->rportfwds, &pf, NULL);
|
|
|
|
|
|
|
|
|
|
if (!pfp) {
|
|
|
|
|
ppl_logevent(("Rejected remote port open request for %s:%d",
|
|
|
|
|
pf.dhost, port));
|
|
|
|
|
pktout = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_MSG_CHANNEL_OPEN_FAILURE);
|
|
|
|
|
put_uint32(pktout, remid);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
} else {
|
|
|
|
|
char *err;
|
|
|
|
|
|
|
|
|
|
c = snew(struct ssh1_channel);
|
|
|
|
|
c->connlayer = s;
|
|
|
|
|
ppl_logevent(("Received remote port open request for %s:%d",
|
|
|
|
|
pf.dhost, port));
|
|
|
|
|
err = portfwdmgr_connect(
|
|
|
|
|
s->portfwdmgr, &c->chan, pf.dhost, port,
|
|
|
|
|
&c->sc, pfp->addressfamily);
|
|
|
|
|
|
|
|
|
|
if (err) {
|
|
|
|
|
ppl_logevent(("Port open failed: %s", err));
|
|
|
|
|
sfree(err);
|
|
|
|
|
ssh1_channel_free(c);
|
|
|
|
|
pktout = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_MSG_CHANNEL_OPEN_FAILURE);
|
|
|
|
|
put_uint32(pktout, remid);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
} else {
|
|
|
|
|
ssh1_channel_init(c);
|
|
|
|
|
c->remoteid = remid;
|
|
|
|
|
c->halfopen = FALSE;
|
|
|
|
|
pktout = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION);
|
|
|
|
|
put_uint32(pktout, c->remoteid);
|
|
|
|
|
put_uint32(pktout, c->localid);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
ppl_logevent(("Forwarded port opened successfully"));
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
sfree(pf.dhost);
|
|
|
|
|
|
|
|
|
|
pq_pop(s->ppl.in_pq);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SSH1_MSG_CHANNEL_DATA:
|
|
|
|
|
case SSH1_MSG_CHANNEL_OPEN_CONFIRMATION:
|
|
|
|
|
case SSH1_MSG_CHANNEL_OPEN_FAILURE:
|
|
|
|
|
case SSH1_MSG_CHANNEL_CLOSE:
|
|
|
|
|
case SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION:
|
|
|
|
|
/*
|
|
|
|
|
* Common preliminary code for all the messages from the
|
|
|
|
|
* server that cite one of our channel ids: look up that
|
|
|
|
|
* channel id, check it exists, and if it's for a sharing
|
|
|
|
|
* downstream, pass it on.
|
|
|
|
|
*/
|
|
|
|
|
localid = get_uint32(pktin);
|
|
|
|
|
c = find234(s->channels, &localid, ssh1_channelfind);
|
|
|
|
|
|
|
|
|
|
expect_halfopen = (
|
|
|
|
|
pktin->type == SSH1_MSG_CHANNEL_OPEN_CONFIRMATION ||
|
|
|
|
|
pktin->type == SSH1_MSG_CHANNEL_OPEN_FAILURE);
|
|
|
|
|
|
|
|
|
|
if (!c || c->halfopen != expect_halfopen) {
|
|
|
|
|
ssh_remote_error(
|
|
|
|
|
s->ppl.ssh, "Received %s for %s channel %u",
|
|
|
|
|
ssh1_pkt_type(pktin->type),
|
|
|
|
|
!c ? "nonexistent" : c->halfopen ? "half-open" : "open",
|
|
|
|
|
localid);
|
|
|
|
|
return TRUE;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
switch (pktin->type) {
|
|
|
|
|
case SSH1_MSG_CHANNEL_OPEN_CONFIRMATION:
|
|
|
|
|
assert(c->halfopen);
|
|
|
|
|
c->remoteid = get_uint32(pktin);
|
|
|
|
|
c->halfopen = FALSE;
|
|
|
|
|
c->throttling_conn = FALSE;
|
|
|
|
|
|
|
|
|
|
chan_open_confirmation(c->chan);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Now that the channel is fully open, it's possible
|
|
|
|
|
* in principle to immediately close it. Check whether
|
|
|
|
|
* it wants us to!
|
|
|
|
|
*
|
|
|
|
|
* This can occur if a local socket error occurred
|
|
|
|
|
* between us sending out CHANNEL_OPEN and receiving
|
|
|
|
|
* OPEN_CONFIRMATION. If that happens, all we can do
|
|
|
|
|
* is immediately initiate close proceedings now that
|
|
|
|
|
* we know the server's id to put in the close
|
|
|
|
|
* message. We'll have handled that in this code by
|
|
|
|
|
* having already turned c->chan into a zombie, so its
|
|
|
|
|
* want_close method (which ssh1_channel_check_close
|
|
|
|
|
* will consult) will already be returning TRUE.
|
|
|
|
|
*/
|
|
|
|
|
ssh1_channel_check_close(c);
|
|
|
|
|
|
|
|
|
|
if (c->pending_eof)
|
|
|
|
|
ssh1_channel_try_eof(c); /* in case we had a pending EOF */
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SSH1_MSG_CHANNEL_OPEN_FAILURE:
|
|
|
|
|
assert(c->halfopen);
|
|
|
|
|
|
|
|
|
|
chan_open_failed(c->chan, NULL);
|
|
|
|
|
chan_free(c->chan);
|
|
|
|
|
|
|
|
|
|
del234(s->channels, c);
|
|
|
|
|
ssh1_channel_free(c);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SSH1_MSG_CHANNEL_DATA:
|
|
|
|
|
data = get_string(pktin);
|
|
|
|
|
if (!get_err(pktin)) {
|
|
|
|
|
int bufsize = chan_send(
|
|
|
|
|
c->chan, FALSE, data.ptr, data.len);
|
|
|
|
|
|
|
|
|
|
if (!c->throttling_conn && bufsize > SSH1_BUFFER_LIMIT) {
|
|
|
|
|
c->throttling_conn = TRUE;
|
|
|
|
|
ssh_throttle_conn(s->ppl.ssh, +1);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SSH1_MSG_CHANNEL_CLOSE:
|
|
|
|
|
if (!(c->closes & CLOSES_RCVD_CLOSE)) {
|
|
|
|
|
c->closes |= CLOSES_RCVD_CLOSE;
|
|
|
|
|
chan_send_eof(c->chan);
|
|
|
|
|
ssh1_channel_check_close(c);
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION:
|
|
|
|
|
if (!(c->closes & CLOSES_RCVD_CLOSECONF)) {
|
|
|
|
|
if (!(c->closes & CLOSES_SENT_CLOSE)) {
|
|
|
|
|
ssh_remote_error(
|
|
|
|
|
s->ppl.ssh,
|
|
|
|
|
"Received CHANNEL_CLOSE_CONFIRMATION for channel"
|
|
|
|
|
" %u for which we never sent CHANNEL_CLOSE\n",
|
|
|
|
|
c->localid);
|
|
|
|
|
return TRUE;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
c->closes |= CLOSES_RCVD_CLOSECONF;
|
|
|
|
|
ssh1_channel_check_close(c);
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pq_pop(s->ppl.in_pq);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SSH1_SMSG_STDOUT_DATA:
|
|
|
|
|
case SSH1_SMSG_STDERR_DATA:
|
|
|
|
|
data = get_string(pktin);
|
|
|
|
|
if (!get_err(pktin)) {
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 21:58:42 +03:00
|
|
|
int bufsize = seat_output(
|
|
|
|
|
s->ppl.seat, pktin->type == SSH1_SMSG_STDERR_DATA,
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
data.ptr, data.len);
|
|
|
|
|
if (!s->stdout_throttling && bufsize > SSH1_BUFFER_LIMIT) {
|
|
|
|
|
s->stdout_throttling = 1;
|
|
|
|
|
ssh_throttle_conn(s->ppl.ssh, +1);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pq_pop(s->ppl.in_pq);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SSH1_SMSG_EXIT_STATUS:
|
|
|
|
|
{
|
|
|
|
|
int exitcode = get_uint32(pktin);
|
|
|
|
|
ppl_logevent(("Server sent command exit status %d", exitcode));
|
|
|
|
|
ssh_got_exitcode(s->ppl.ssh, exitcode);
|
|
|
|
|
|
|
|
|
|
s->session_terminated = TRUE;
|
|
|
|
|
if (ssh1_check_termination(s))
|
|
|
|
|
return TRUE;
|
|
|
|
|
}
|
|
|
|
|
pq_pop(s->ppl.in_pq);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
default:
|
|
|
|
|
return FALSE;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static PktIn *ssh1_connection_pop(struct ssh1_connection_state *s)
|
|
|
|
|
{
|
|
|
|
|
ssh1_connection_filter_queue(s);
|
|
|
|
|
return pq_pop(s->ppl.in_pq);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_connection_process_queue(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh1_connection_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
PktIn *pktin;
|
|
|
|
|
|
|
|
|
|
if (ssh1_connection_filter_queue(s)) /* no matter why we were called */
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
crBegin(s->crState);
|
|
|
|
|
|
|
|
|
|
portfwdmgr_config(s->portfwdmgr, s->conf);
|
|
|
|
|
s->portfwdmgr_configured = TRUE;
|
|
|
|
|
|
|
|
|
|
/*
|
2018-09-30 13:22:01 +03:00
|
|
|
* Start up the main session, by telling mainchan.c to do it all
|
|
|
|
|
* just as it would in SSH-2, and translating those concepts to
|
|
|
|
|
* SSH-1's non-channel-shaped idea of the main session.
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
*/
|
2018-09-30 13:22:01 +03:00
|
|
|
s->mainchan = mainchan_new(
|
|
|
|
|
&s->ppl, &s->cl, s->conf, s->term_width, s->term_height,
|
|
|
|
|
FALSE /* is_simple */, NULL);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
while (1) {
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* By this point, most incoming packets are already being
|
|
|
|
|
* handled by filter_queue, and we need only pay attention to
|
|
|
|
|
* the unusual ones.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
if ((pktin = ssh1_connection_pop(s)) != NULL) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Unexpected packet received, "
|
|
|
|
|
"type %d (%s)", pktin->type,
|
|
|
|
|
ssh1_pkt_type(pktin->type));
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
crReturnV;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
crFinishV;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_channel_check_close(struct ssh1_channel *c)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s = c->connlayer;
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
if (c->halfopen) {
|
|
|
|
|
/*
|
|
|
|
|
* If we've sent out our own CHANNEL_OPEN but not yet seen
|
|
|
|
|
* either OPEN_CONFIRMATION or OPEN_FAILURE in response, then
|
|
|
|
|
* it's too early to be sending close messages of any kind.
|
|
|
|
|
*/
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if ((!((CLOSES_SENT_CLOSE | CLOSES_RCVD_CLOSE) & ~c->closes) ||
|
|
|
|
|
chan_want_close(c->chan, (c->closes & CLOSES_SENT_CLOSE),
|
|
|
|
|
(c->closes & CLOSES_RCVD_CLOSE))) &&
|
|
|
|
|
!(c->closes & CLOSES_SENT_CLOSECONF)) {
|
|
|
|
|
/*
|
|
|
|
|
* We have both sent and received CLOSE (or the channel type
|
|
|
|
|
* doesn't need us to), which means the channel is in final
|
|
|
|
|
* wind-up. Send CLOSE and/or CLOSE_CONFIRMATION, whichever we
|
|
|
|
|
* haven't sent yet.
|
|
|
|
|
*/
|
|
|
|
|
if (!(c->closes & CLOSES_SENT_CLOSE)) {
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_MSG_CHANNEL_CLOSE);
|
|
|
|
|
put_uint32(pktout, c->remoteid);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
c->closes |= CLOSES_SENT_CLOSE;
|
|
|
|
|
}
|
|
|
|
|
if (c->closes & CLOSES_RCVD_CLOSE) {
|
|
|
|
|
pktout = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION);
|
|
|
|
|
put_uint32(pktout, c->remoteid);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
c->closes |= CLOSES_SENT_CLOSECONF;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (!((CLOSES_SENT_CLOSECONF | CLOSES_RCVD_CLOSECONF) & ~c->closes)) {
|
|
|
|
|
/*
|
|
|
|
|
* We have both sent and received CLOSE_CONFIRMATION, which
|
|
|
|
|
* means we're completely done with the channel.
|
|
|
|
|
*/
|
|
|
|
|
ssh1_channel_destroy(c);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_channel_try_eof(struct ssh1_channel *c)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s = c->connlayer;
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
assert(c->pending_eof); /* precondition for calling us */
|
|
|
|
|
if (c->halfopen)
|
|
|
|
|
return; /* can't close: not even opened yet */
|
|
|
|
|
|
|
|
|
|
c->pending_eof = FALSE; /* we're about to send it */
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_MSG_CHANNEL_CLOSE);
|
|
|
|
|
put_uint32(pktout, c->remoteid);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
c->closes |= CLOSES_SENT_CLOSE;
|
|
|
|
|
|
|
|
|
|
ssh1_channel_check_close(c);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Close any local socket and free any local resources associated with
|
|
|
|
|
* a channel. This converts the channel into a zombie.
|
|
|
|
|
*/
|
|
|
|
|
static void ssh1_channel_close_local(struct ssh1_channel *c,
|
|
|
|
|
const char *reason)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s = c->connlayer;
|
|
|
|
|
PacketProtocolLayer *ppl = &s->ppl; /* for ppl_logevent */
|
|
|
|
|
const char *msg = chan_log_close_msg(c->chan);
|
|
|
|
|
|
|
|
|
|
if (msg != NULL)
|
|
|
|
|
ppl_logevent(("%s%s%s", msg, reason ? " " : "", reason ? reason : ""));
|
|
|
|
|
|
|
|
|
|
chan_free(c->chan);
|
|
|
|
|
c->chan = zombiechan_new();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_check_termination_callback(void *vctx)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s = (struct ssh1_connection_state *)vctx;
|
|
|
|
|
ssh1_check_termination(s);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_channel_destroy(struct ssh1_channel *c)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s = c->connlayer;
|
|
|
|
|
|
|
|
|
|
ssh1_channel_close_local(c, NULL);
|
|
|
|
|
del234(s->channels, c);
|
|
|
|
|
ssh1_channel_free(c);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If that was the last channel left open, we might need to
|
|
|
|
|
* terminate. But we'll be a bit cautious, by doing that in a
|
|
|
|
|
* toplevel callback, just in case anything on the current call
|
|
|
|
|
* stack objects to this entire PPL being freed.
|
|
|
|
|
*/
|
|
|
|
|
queue_toplevel_callback(ssh1_check_termination_callback, s);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1_check_termination(struct ssh1_connection_state *s)
|
|
|
|
|
{
|
|
|
|
|
/*
|
|
|
|
|
* Decide whether we should terminate the SSH connection now.
|
|
|
|
|
* Called after a channel goes away, or when the main session
|
|
|
|
|
* returns SSH1_SMSG_EXIT_STATUS; we terminate when none of either
|
|
|
|
|
* is left.
|
|
|
|
|
*/
|
|
|
|
|
if (s->session_terminated && count234(s->channels) == 0) {
|
|
|
|
|
PktOut *pktout = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_CMSG_EXIT_CONFIRMATION);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
|
|
|
|
|
ssh_user_close(s->ppl.ssh, "Session finished");
|
|
|
|
|
return TRUE;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return FALSE;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Set up most of a new ssh1_channel. Leaves chan untouched (since it
|
|
|
|
|
* will sometimes have been filled in before calling this).
|
|
|
|
|
*/
|
|
|
|
|
static void ssh1_channel_init(struct ssh1_channel *c)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s = c->connlayer;
|
|
|
|
|
c->closes = 0;
|
|
|
|
|
c->pending_eof = FALSE;
|
|
|
|
|
c->throttling_conn = FALSE;
|
|
|
|
|
c->sc.vt = &ssh1channel_vtable;
|
2018-10-14 19:17:48 +03:00
|
|
|
c->sc.cl = &s->cl;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
c->localid = alloc_channel_id(s->channels, struct ssh1_channel);
|
|
|
|
|
add234(s->channels, c);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static Conf *ssh1channel_get_conf(SshChannel *sc)
|
|
|
|
|
{
|
2018-10-06 01:49:08 +03:00
|
|
|
struct ssh1_channel *c = container_of(sc, struct ssh1_channel, sc);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
struct ssh1_connection_state *s = c->connlayer;
|
|
|
|
|
return s->conf;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1channel_write_eof(SshChannel *sc)
|
|
|
|
|
{
|
2018-10-06 01:49:08 +03:00
|
|
|
struct ssh1_channel *c = container_of(sc, struct ssh1_channel, sc);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
if (c->closes & CLOSES_SENT_CLOSE)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
c->pending_eof = TRUE;
|
|
|
|
|
ssh1_channel_try_eof(c);
|
|
|
|
|
}
|
|
|
|
|
|
2018-10-13 12:30:03 +03:00
|
|
|
static void ssh1channel_initiate_close(SshChannel *sc, const char *err)
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
{
|
2018-10-06 01:49:08 +03:00
|
|
|
struct ssh1_channel *c = container_of(sc, struct ssh1_channel, sc);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
char *reason;
|
|
|
|
|
|
2018-10-13 12:30:03 +03:00
|
|
|
reason = err ? dupprintf("due to local error: %s", err) : NULL;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
ssh1_channel_close_local(c, reason);
|
|
|
|
|
sfree(reason);
|
|
|
|
|
c->pending_eof = FALSE; /* this will confuse a zombie channel */
|
|
|
|
|
|
|
|
|
|
ssh1_channel_check_close(c);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1channel_unthrottle(SshChannel *sc, int bufsize)
|
|
|
|
|
{
|
2018-10-06 01:49:08 +03:00
|
|
|
struct ssh1_channel *c = container_of(sc, struct ssh1_channel, sc);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
struct ssh1_connection_state *s = c->connlayer;
|
|
|
|
|
|
|
|
|
|
if (c->throttling_conn && bufsize <= SSH1_BUFFER_LIMIT) {
|
|
|
|
|
c->throttling_conn = 0;
|
|
|
|
|
ssh_throttle_conn(s->ppl.ssh, -1);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1channel_write(SshChannel *sc, const void *buf, int len)
|
|
|
|
|
{
|
2018-10-06 01:49:08 +03:00
|
|
|
struct ssh1_channel *c = container_of(sc, struct ssh1_channel, sc);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
struct ssh1_connection_state *s = c->connlayer;
|
|
|
|
|
|
|
|
|
|
assert(!(c->closes & CLOSES_SENT_CLOSE));
|
|
|
|
|
|
|
|
|
|
PktOut *pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_MSG_CHANNEL_DATA);
|
|
|
|
|
put_uint32(pktout, c->remoteid);
|
|
|
|
|
put_string(pktout, buf, len);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* In SSH-1 we can return 0 here - implying that channels are
|
|
|
|
|
* never individually throttled - because the only circumstance
|
|
|
|
|
* that can cause throttling will be the whole SSH connection
|
|
|
|
|
* backing up, in which case _everything_ will be throttled as a
|
|
|
|
|
* whole.
|
|
|
|
|
*/
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2018-09-30 13:22:01 +03:00
|
|
|
static struct X11FakeAuth *ssh1_add_x11_display(
|
|
|
|
|
ConnectionLayer *cl, int authtype, struct X11Display *disp)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
|
|
|
|
struct X11FakeAuth *auth = x11_invent_fake_auth(s->x11authtree, authtype);
|
|
|
|
|
auth->disp = disp;
|
|
|
|
|
return auth;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1mainchan_succfail_wantreply(struct ssh1_connection_state *s,
|
|
|
|
|
int success, void *ctx)
|
|
|
|
|
{
|
|
|
|
|
chan_request_response(s->mainchan_chan, success);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1mainchan_succfail_nowantreply(struct ssh1_connection_state *s,
|
|
|
|
|
int success, void *ctx)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1mainchan_queue_response(struct ssh1_connection_state *s,
|
|
|
|
|
int want_reply, int trivial)
|
|
|
|
|
{
|
|
|
|
|
sf_handler_fn_t handler = (want_reply ? ssh1mainchan_succfail_wantreply :
|
|
|
|
|
ssh1mainchan_succfail_nowantreply);
|
|
|
|
|
ssh1_queue_succfail_handler(s, handler, NULL, trivial);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1mainchan_request_x11_forwarding(
|
|
|
|
|
SshChannel *sc, int want_reply, const char *authproto,
|
|
|
|
|
const char *authdata, int screen_number, int oneshot)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(sc, struct ssh1_connection_state, mainchan_sc);
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_X11_REQUEST_FORWARDING);
|
|
|
|
|
put_stringz(pktout, authproto);
|
|
|
|
|
put_stringz(pktout, authdata);
|
|
|
|
|
if (s->local_protoflags & SSH1_PROTOFLAG_SCREEN_NUMBER)
|
|
|
|
|
put_uint32(pktout, screen_number);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
|
|
|
|
|
ssh1mainchan_queue_response(s, want_reply, FALSE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1mainchan_request_agent_forwarding(
|
|
|
|
|
SshChannel *sc, int want_reply)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(sc, struct ssh1_connection_state, mainchan_sc);
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_CMSG_AGENT_REQUEST_FORWARDING);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
|
|
|
|
|
ssh1mainchan_queue_response(s, want_reply, FALSE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1mainchan_request_pty(
|
|
|
|
|
SshChannel *sc, int want_reply, Conf *conf, int w, int h)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(sc, struct ssh1_connection_state, mainchan_sc);
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_REQUEST_PTY);
|
|
|
|
|
put_stringz(pktout, conf_get_str(s->conf, CONF_termtype));
|
|
|
|
|
put_uint32(pktout, h);
|
|
|
|
|
put_uint32(pktout, w);
|
|
|
|
|
put_uint32(pktout, 0); /* width in pixels */
|
|
|
|
|
put_uint32(pktout, 0); /* height in pixels */
|
|
|
|
|
write_ttymodes_to_packet(
|
|
|
|
|
BinarySink_UPCAST(pktout), 1,
|
|
|
|
|
get_ttymodes_from_conf(s->ppl.seat, conf));
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
|
|
|
|
|
ssh1mainchan_queue_response(s, want_reply, FALSE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1mainchan_send_env_var(
|
|
|
|
|
SshChannel *sc, int want_reply, const char *var, const char *value)
|
|
|
|
|
{
|
|
|
|
|
return FALSE; /* SSH-1 doesn't support this at all */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1mainchan_start_shell(
|
|
|
|
|
SshChannel *sc, int want_reply)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(sc, struct ssh1_connection_state, mainchan_sc);
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_EXEC_SHELL);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
|
|
|
|
|
ssh1mainchan_queue_response(s, want_reply, TRUE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1mainchan_start_command(
|
|
|
|
|
SshChannel *sc, int want_reply, const char *command)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(sc, struct ssh1_connection_state, mainchan_sc);
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_EXEC_CMD);
|
|
|
|
|
put_stringz(pktout, command);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
|
|
|
|
|
ssh1mainchan_queue_response(s, want_reply, TRUE);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1mainchan_start_subsystem(
|
|
|
|
|
SshChannel *sc, int want_reply, const char *subsystem)
|
|
|
|
|
{
|
|
|
|
|
return FALSE; /* SSH-1 doesn't support this at all */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1mainchan_send_serial_break(
|
|
|
|
|
SshChannel *sc, int want_reply, int length)
|
|
|
|
|
{
|
|
|
|
|
return FALSE; /* SSH-1 doesn't support this at all */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1mainchan_send_signal(
|
|
|
|
|
SshChannel *sc, int want_reply, const char *signame)
|
|
|
|
|
{
|
|
|
|
|
return FALSE; /* SSH-1 doesn't support this at all */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1mainchan_send_terminal_size_change(SshChannel *sc, int w, int h)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(sc, struct ssh1_connection_state, mainchan_sc);
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_WINDOW_SIZE);
|
|
|
|
|
put_uint32(pktout, h);
|
|
|
|
|
put_uint32(pktout, w);
|
|
|
|
|
put_uint32(pktout, 0); /* width in pixels */
|
|
|
|
|
put_uint32(pktout, 0); /* height in pixels */
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1mainchan_hint_channel_is_simple(SshChannel *c)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1mainchan_write(SshChannel *sc, const void *data, int len)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(sc, struct ssh1_connection_state, mainchan_sc);
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_STDIN_DATA);
|
|
|
|
|
put_string(pktout, data, len);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1mainchan_write_eof(SshChannel *sc)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(sc, struct ssh1_connection_state, mainchan_sc);
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_CMSG_EOF);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_session_confirm_callback(void *vctx)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s = (struct ssh1_connection_state *)vctx;
|
|
|
|
|
chan_open_confirmation(s->mainchan_chan);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static SshChannel *ssh1_session_open(ConnectionLayer *cl, Channel *chan)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
|
|
|
|
s->mainchan_sc.cl = &s->cl;
|
|
|
|
|
s->mainchan_sc.vt = &ssh1mainchan_vtable;
|
|
|
|
|
s->mainchan_chan = chan;
|
|
|
|
|
queue_toplevel_callback(ssh1_session_confirm_callback, s);
|
|
|
|
|
return &s->mainchan_sc;
|
|
|
|
|
}
|
|
|
|
|
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
static SshChannel *ssh1_lportfwd_open(
|
|
|
|
|
ConnectionLayer *cl, const char *hostname, int port,
|
|
|
|
|
const char *org, Channel *chan)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
PacketProtocolLayer *ppl = &s->ppl; /* for ppl_logevent */
|
|
|
|
|
struct ssh1_channel *c = snew(struct ssh1_channel);
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
c->connlayer = s;
|
|
|
|
|
ssh1_channel_init(c);
|
|
|
|
|
c->halfopen = TRUE;
|
|
|
|
|
c->chan = chan;
|
|
|
|
|
|
|
|
|
|
ppl_logevent(("Opening connection to %s:%d for %s", hostname, port, org));
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_MSG_PORT_OPEN);
|
|
|
|
|
put_uint32(pktout, c->localid);
|
|
|
|
|
put_stringz(pktout, hostname);
|
|
|
|
|
put_uint32(pktout, port);
|
|
|
|
|
/* originator string would go here, but we didn't specify
|
|
|
|
|
* SSH_PROTOFLAG_HOST_IN_FWD_OPEN */
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
|
|
|
|
|
return &c->sc;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_rportfwd_response(struct ssh1_connection_state *s,
|
2018-09-30 13:22:01 +03:00
|
|
|
int success, void *ctx)
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
{
|
|
|
|
|
PacketProtocolLayer *ppl = &s->ppl; /* for ppl_logevent */
|
|
|
|
|
struct ssh_rportfwd *rpf = (struct ssh_rportfwd *)ctx;
|
|
|
|
|
|
2018-09-30 13:22:01 +03:00
|
|
|
if (success) {
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
ppl_logevent(("Remote port forwarding from %s enabled",
|
|
|
|
|
rpf->log_description));
|
|
|
|
|
} else {
|
|
|
|
|
ppl_logevent(("Remote port forwarding from %s refused",
|
|
|
|
|
rpf->log_description));
|
|
|
|
|
|
|
|
|
|
struct ssh_rportfwd *realpf = del234(s->rportfwds, rpf);
|
|
|
|
|
assert(realpf == rpf);
|
|
|
|
|
portfwdmgr_close(s->portfwdmgr, rpf->pfr);
|
|
|
|
|
free_rportfwd(rpf);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct ssh_rportfwd *ssh1_rportfwd_alloc(
|
|
|
|
|
ConnectionLayer *cl,
|
|
|
|
|
const char *shost, int sport, const char *dhost, int dport,
|
|
|
|
|
int addressfamily, const char *log_description, PortFwdRecord *pfr,
|
|
|
|
|
ssh_sharing_connstate *share_ctx)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
struct ssh_rportfwd *rpf = snew(struct ssh_rportfwd);
|
|
|
|
|
|
|
|
|
|
rpf->shost = dupstr(shost);
|
|
|
|
|
rpf->sport = sport;
|
|
|
|
|
rpf->dhost = dupstr(dhost);
|
|
|
|
|
rpf->dport = dport;
|
|
|
|
|
rpf->addressfamily = addressfamily;
|
|
|
|
|
rpf->log_description = dupstr(log_description);
|
|
|
|
|
rpf->pfr = pfr;
|
|
|
|
|
|
|
|
|
|
if (add234(s->rportfwds, rpf) != rpf) {
|
|
|
|
|
free_rportfwd(rpf);
|
|
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
PktOut *pktout = ssh_bpp_new_pktout(
|
|
|
|
|
s->ppl.bpp, SSH1_CMSG_PORT_FORWARD_REQUEST);
|
|
|
|
|
put_uint32(pktout, rpf->sport);
|
|
|
|
|
put_stringz(pktout, rpf->dhost);
|
|
|
|
|
put_uint32(pktout, rpf->dport);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
|
2018-09-30 13:22:01 +03:00
|
|
|
ssh1_queue_succfail_handler(s, ssh1_rportfwd_response, rpf, FALSE);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
return rpf;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_rportfwd_remove(ConnectionLayer *cl, struct ssh_rportfwd *rpf)
|
|
|
|
|
{
|
|
|
|
|
/*
|
|
|
|
|
* We cannot cancel listening ports on the server side in SSH-1!
|
|
|
|
|
* There's no message to support it.
|
|
|
|
|
*/
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1_agent_forwarding_permitted(ConnectionLayer *cl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
return conf_get_int(s->conf, CONF_agentfwd) && agent_exists();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_connection_special_cmd(PacketProtocolLayer *ppl,
|
|
|
|
|
SessionSpecialCode code, int arg)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh1_connection_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
if (code == SS_PING || code == SS_NOP) {
|
|
|
|
|
if (!(s->ppl.remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE)) {
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH1_MSG_IGNORE);
|
|
|
|
|
put_stringz(pktout, "");
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
}
|
2018-09-30 13:22:01 +03:00
|
|
|
} else if (s->mainchan) {
|
|
|
|
|
mainchan_special_cmd(s->mainchan, code, arg);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_terminal_size(ConnectionLayer *cl, int width, int height)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
s->term_width = width;
|
|
|
|
|
s->term_height = height;
|
2018-09-30 13:22:01 +03:00
|
|
|
if (s->mainchan)
|
|
|
|
|
mainchan_terminal_size(s->mainchan, width, height);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_stdout_unthrottle(ConnectionLayer *cl, int bufsize)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
if (s->stdout_throttling && bufsize < SSH1_BUFFER_LIMIT) {
|
|
|
|
|
s->stdout_throttling = 0;
|
|
|
|
|
ssh_throttle_conn(s->ppl.ssh, -1);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1_stdin_backlog(ConnectionLayer *cl)
|
|
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_throttle_all_channels(ConnectionLayer *cl, int throttled)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
struct ssh1_channel *c;
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; NULL != (c = index234(s->channels, i)); i++)
|
|
|
|
|
chan_set_input_wanted(c->chan, !throttled);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1_ldisc_option(ConnectionLayer *cl, int option)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
2018-09-30 13:22:01 +03:00
|
|
|
return s->ldisc_opts[option];
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_set_ldisc_option(ConnectionLayer *cl, int option, int value)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
|
|
|
|
|
|
|
|
|
s->ldisc_opts[option] = value;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_enable_x_fwd(ConnectionLayer *cl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
|
|
|
|
|
|
|
|
|
s->X11_fwd_enabled = TRUE;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_enable_agent_fwd(ConnectionLayer *cl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
|
|
|
|
|
|
|
|
|
s->agent_fwd_enabled = TRUE;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_set_wants_user_input(ConnectionLayer *cl, int wanted)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
|
|
|
|
container_of(cl, struct ssh1_connection_state, cl);
|
|
|
|
|
|
|
|
|
|
s->want_user_input = wanted;
|
|
|
|
|
s->finished_setup = TRUE;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh1_connection_want_user_input(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh1_connection_state, ppl);
|
2018-09-30 13:22:01 +03:00
|
|
|
|
|
|
|
|
return s->want_user_input;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_connection_got_user_input(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh1_connection_state, ppl);
|
2018-09-30 13:22:01 +03:00
|
|
|
|
|
|
|
|
while (s->mainchan && bufchain_size(s->ppl.user_input) > 0) {
|
|
|
|
|
/*
|
|
|
|
|
* Add user input to the main channel's buffer.
|
|
|
|
|
*/
|
|
|
|
|
void *data;
|
|
|
|
|
int len;
|
|
|
|
|
bufchain_prefix(s->ppl.user_input, &data, &len);
|
|
|
|
|
if (len > 512)
|
|
|
|
|
len = 512;
|
|
|
|
|
sshfwd_write(&s->mainchan_sc, data, len);
|
|
|
|
|
bufchain_consume(s->ppl.user_input, len);
|
|
|
|
|
}
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh1_connection_reconfigure(PacketProtocolLayer *ppl, Conf *conf)
|
|
|
|
|
{
|
|
|
|
|
struct ssh1_connection_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh1_connection_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
conf_free(s->conf);
|
|
|
|
|
s->conf = conf_copy(conf);
|
|
|
|
|
|
|
|
|
|
if (s->portfwdmgr_configured)
|
|
|
|
|
portfwdmgr_config(s->portfwdmgr, s->conf);
|
|
|
|
|
}
|