Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
/*
|
|
|
|
|
* Packet protocol layer for the SSH-2 transport protocol (RFC 4253).
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <assert.h>
|
|
|
|
|
|
|
|
|
|
#include "putty.h"
|
|
|
|
|
#include "ssh.h"
|
|
|
|
|
#include "sshbpp.h"
|
|
|
|
|
#include "sshppl.h"
|
|
|
|
|
#include "sshcr.h"
|
|
|
|
|
#include "storage.h"
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
#include "ssh2transport.h"
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
const struct ssh_signkey_with_user_pref_id ssh2_hostkey_algs[] = {
|
|
|
|
|
#define ARRAYENT_HOSTKEY_ALGORITHM(type, alg) { &alg, type },
|
|
|
|
|
HOSTKEY_ALGORITHMS(ARRAYENT_HOSTKEY_ALGORITHM)
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
const static struct ssh2_macalg *const macs[] = {
|
|
|
|
|
&ssh_hmac_sha256, &ssh_hmac_sha1, &ssh_hmac_sha1_96, &ssh_hmac_md5
|
|
|
|
|
};
|
|
|
|
|
const static struct ssh2_macalg *const buggymacs[] = {
|
|
|
|
|
&ssh_hmac_sha1_buggy, &ssh_hmac_sha1_96_buggy, &ssh_hmac_md5
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static ssh_compressor *ssh_comp_none_init(void)
|
|
|
|
|
{
|
|
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
static void ssh_comp_none_cleanup(ssh_compressor *handle)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
static ssh_decompressor *ssh_decomp_none_init(void)
|
|
|
|
|
{
|
|
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
static void ssh_decomp_none_cleanup(ssh_decompressor *handle)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
static void ssh_comp_none_block(ssh_compressor *handle,
|
|
|
|
|
unsigned char *block, int len,
|
|
|
|
|
unsigned char **outblock, int *outlen,
|
|
|
|
|
int minlen)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
static int ssh_decomp_none_block(ssh_decompressor *handle,
|
|
|
|
|
unsigned char *block, int len,
|
|
|
|
|
unsigned char **outblock, int *outlen)
|
|
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
const static struct ssh_compression_alg ssh_comp_none = {
|
|
|
|
|
"none", NULL,
|
|
|
|
|
ssh_comp_none_init, ssh_comp_none_cleanup, ssh_comp_none_block,
|
|
|
|
|
ssh_decomp_none_init, ssh_decomp_none_cleanup, ssh_decomp_none_block,
|
|
|
|
|
NULL
|
|
|
|
|
};
|
|
|
|
|
const static struct ssh_compression_alg *const compressions[] = {
|
|
|
|
|
&ssh_zlib, &ssh_comp_none
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static void ssh2_transport_free(PacketProtocolLayer *);
|
|
|
|
|
static void ssh2_transport_process_queue(PacketProtocolLayer *);
|
|
|
|
|
static int ssh2_transport_get_specials(
|
|
|
|
|
PacketProtocolLayer *ppl, add_special_fn_t add_special, void *ctx);
|
|
|
|
|
static void ssh2_transport_special_cmd(PacketProtocolLayer *ppl,
|
|
|
|
|
SessionSpecialCode code, int arg);
|
|
|
|
|
static int ssh2_transport_want_user_input(PacketProtocolLayer *ppl);
|
|
|
|
|
static void ssh2_transport_got_user_input(PacketProtocolLayer *ppl);
|
|
|
|
|
static void ssh2_transport_reconfigure(PacketProtocolLayer *ppl, Conf *conf);
|
|
|
|
|
|
|
|
|
|
static void ssh2_transport_set_max_data_size(struct ssh2_transport_state *s);
|
|
|
|
|
static unsigned long sanitise_rekey_time(int rekey_time, unsigned long def);
|
|
|
|
|
static void ssh2_transport_higher_layer_packet_callback(void *context);
|
|
|
|
|
|
|
|
|
|
static const struct PacketProtocolLayerVtable ssh2_transport_vtable = {
|
|
|
|
|
ssh2_transport_free,
|
|
|
|
|
ssh2_transport_process_queue,
|
|
|
|
|
ssh2_transport_get_specials,
|
|
|
|
|
ssh2_transport_special_cmd,
|
|
|
|
|
ssh2_transport_want_user_input,
|
|
|
|
|
ssh2_transport_got_user_input,
|
|
|
|
|
ssh2_transport_reconfigure,
|
|
|
|
|
NULL, /* no protocol name for this layer */
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#ifndef NO_GSSAPI
|
|
|
|
|
static void ssh2_transport_gss_update(struct ssh2_transport_state *s,
|
|
|
|
|
int definitely_rekeying);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static int ssh2_transport_timer_update(struct ssh2_transport_state *s,
|
|
|
|
|
unsigned long rekey_time);
|
|
|
|
|
|
|
|
|
|
static const char *const kexlist_descr[NKEXLIST] = {
|
|
|
|
|
"key exchange algorithm",
|
|
|
|
|
"host key algorithm",
|
|
|
|
|
"client-to-server cipher",
|
|
|
|
|
"server-to-client cipher",
|
|
|
|
|
"client-to-server MAC",
|
|
|
|
|
"server-to-client MAC",
|
|
|
|
|
"client-to-server compression method",
|
|
|
|
|
"server-to-client compression method"
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
PacketProtocolLayer *ssh2_transport_new(
|
|
|
|
|
Conf *conf, const char *host, int port, const char *fullhostname,
|
|
|
|
|
const char *client_greeting, const char *server_greeting,
|
|
|
|
|
struct ssh_connection_shared_gss_state *shgss,
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
struct DataTransferStats *stats, PacketProtocolLayer *higher_layer,
|
|
|
|
|
int is_server)
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
{
|
|
|
|
|
struct ssh2_transport_state *s = snew(struct ssh2_transport_state);
|
|
|
|
|
memset(s, 0, sizeof(*s));
|
|
|
|
|
s->ppl.vt = &ssh2_transport_vtable;
|
|
|
|
|
|
|
|
|
|
s->conf = conf_copy(conf);
|
|
|
|
|
s->savedhost = dupstr(host);
|
|
|
|
|
s->savedport = port;
|
|
|
|
|
s->fullhostname = dupstr(fullhostname);
|
|
|
|
|
s->shgss = shgss;
|
|
|
|
|
s->client_greeting = dupstr(client_greeting);
|
|
|
|
|
s->server_greeting = dupstr(server_greeting);
|
|
|
|
|
s->stats = stats;
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
s->hostkeyblob = strbuf_new();
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
pq_in_init(&s->pq_in_higher);
|
|
|
|
|
pq_out_init(&s->pq_out_higher);
|
|
|
|
|
s->pq_out_higher.pqb.ic = &s->ic_pq_out_higher;
|
|
|
|
|
s->ic_pq_out_higher.fn = ssh2_transport_higher_layer_packet_callback;
|
|
|
|
|
s->ic_pq_out_higher.ctx = &s->ppl;
|
|
|
|
|
|
|
|
|
|
s->higher_layer = higher_layer;
|
|
|
|
|
s->higher_layer->selfptr = &s->higher_layer;
|
|
|
|
|
ssh_ppl_setup_queues(s->higher_layer, &s->pq_in_higher, &s->pq_out_higher);
|
|
|
|
|
|
|
|
|
|
#ifndef NO_GSSAPI
|
|
|
|
|
s->gss_cred_expiry = GSS_NO_EXPIRATION;
|
|
|
|
|
s->shgss->srv_name = GSS_C_NO_NAME;
|
|
|
|
|
s->shgss->ctx = NULL;
|
|
|
|
|
#endif
|
2018-10-06 15:32:17 +03:00
|
|
|
s->thc = ssh_transient_hostkey_cache_new();
|
2018-10-29 22:50:29 +03:00
|
|
|
s->gss_kex_used = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
s->outgoing_kexinit = strbuf_new();
|
|
|
|
|
s->incoming_kexinit = strbuf_new();
|
|
|
|
|
if (is_server) {
|
|
|
|
|
s->client_kexinit = s->incoming_kexinit;
|
|
|
|
|
s->server_kexinit = s->outgoing_kexinit;
|
|
|
|
|
s->out.mkkey_adjust = 1;
|
|
|
|
|
} else {
|
|
|
|
|
s->client_kexinit = s->outgoing_kexinit;
|
|
|
|
|
s->server_kexinit = s->incoming_kexinit;
|
|
|
|
|
s->in.mkkey_adjust = 1;
|
|
|
|
|
}
|
2018-10-06 15:46:13 +03:00
|
|
|
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
ssh2_transport_set_max_data_size(s);
|
|
|
|
|
|
|
|
|
|
return &s->ppl;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh2_transport_free(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh2_transport_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh2_transport_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* As our last act before being freed, move any outgoing packets
|
|
|
|
|
* off our higher layer's output queue on to our own output queue.
|
|
|
|
|
* We might be being freed while the SSH connection is still alive
|
|
|
|
|
* (because we're initiating shutdown from our end), in which case
|
|
|
|
|
* we don't want those last few packets to get lost.
|
|
|
|
|
*
|
|
|
|
|
* (If our owner were to have already destroyed our output pq
|
|
|
|
|
* before wanting to free us, then it would have to reset our
|
|
|
|
|
* publicly visible out_pq field to NULL to inhibit this attempt.
|
|
|
|
|
* But that's not how I expect the shutdown sequence to go in
|
|
|
|
|
* practice.)
|
|
|
|
|
*/
|
|
|
|
|
if (s->ppl.out_pq)
|
|
|
|
|
pq_concatenate(s->ppl.out_pq, s->ppl.out_pq, &s->pq_out_higher);
|
|
|
|
|
|
|
|
|
|
conf_free(s->conf);
|
|
|
|
|
|
|
|
|
|
ssh_ppl_free(s->higher_layer);
|
|
|
|
|
|
|
|
|
|
pq_in_clear(&s->pq_in_higher);
|
|
|
|
|
pq_out_clear(&s->pq_out_higher);
|
|
|
|
|
|
|
|
|
|
sfree(s->savedhost);
|
|
|
|
|
sfree(s->fullhostname);
|
|
|
|
|
sfree(s->client_greeting);
|
|
|
|
|
sfree(s->server_greeting);
|
|
|
|
|
sfree(s->keystr);
|
|
|
|
|
sfree(s->hostkey_str);
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
strbuf_free(s->hostkeyblob);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
sfree(s->fingerprint);
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
if (s->hkey && !s->hostkeys) {
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
ssh_key_free(s->hkey);
|
|
|
|
|
s->hkey = NULL;
|
|
|
|
|
}
|
|
|
|
|
if (s->f) freebn(s->f);
|
|
|
|
|
if (s->p) freebn(s->p);
|
|
|
|
|
if (s->g) freebn(s->g);
|
|
|
|
|
if (s->K) freebn(s->K);
|
|
|
|
|
if (s->dh_ctx)
|
|
|
|
|
dh_cleanup(s->dh_ctx);
|
|
|
|
|
if (s->rsa_kex_key)
|
|
|
|
|
ssh_rsakex_freekey(s->rsa_kex_key);
|
|
|
|
|
if (s->ecdh_key)
|
|
|
|
|
ssh_ecdhkex_freekey(s->ecdh_key);
|
|
|
|
|
if (s->exhash)
|
|
|
|
|
ssh_hash_free(s->exhash);
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
strbuf_free(s->outgoing_kexinit);
|
|
|
|
|
strbuf_free(s->incoming_kexinit);
|
2018-10-06 15:32:17 +03:00
|
|
|
ssh_transient_hostkey_cache_free(s->thc);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
sfree(s);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* SSH-2 key derivation (RFC 4253 section 7.2).
|
|
|
|
|
*/
|
|
|
|
|
static void ssh2_mkkey(
|
|
|
|
|
struct ssh2_transport_state *s, strbuf *out,
|
|
|
|
|
Bignum K, unsigned char *H, char chr, int keylen)
|
|
|
|
|
{
|
|
|
|
|
int hlen = s->kex_alg->hash->hlen;
|
|
|
|
|
int keylen_padded;
|
|
|
|
|
unsigned char *key;
|
|
|
|
|
ssh_hash *h;
|
|
|
|
|
|
|
|
|
|
if (keylen == 0)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Round the requested amount of key material up to a multiple of
|
|
|
|
|
* the length of the hash we're using to make it. This makes life
|
|
|
|
|
* simpler because then we can just write each hash output block
|
|
|
|
|
* straight into the output buffer without fiddling about
|
|
|
|
|
* truncating the last one. Since it's going into a strbuf, and
|
|
|
|
|
* strbufs are always smemclr()ed on free, there's no need to
|
|
|
|
|
* worry about leaving extra potentially-sensitive data in memory
|
|
|
|
|
* that the caller didn't ask for.
|
|
|
|
|
*/
|
|
|
|
|
keylen_padded = ((keylen + hlen - 1) / hlen) * hlen;
|
|
|
|
|
|
|
|
|
|
out->len = 0;
|
|
|
|
|
key = strbuf_append(out, keylen_padded);
|
|
|
|
|
|
|
|
|
|
/* First hlen bytes. */
|
|
|
|
|
h = ssh_hash_new(s->kex_alg->hash);
|
|
|
|
|
if (!(s->ppl.remote_bugs & BUG_SSH2_DERIVEKEY))
|
|
|
|
|
put_mp_ssh2(h, K);
|
|
|
|
|
put_data(h, H, hlen);
|
|
|
|
|
put_byte(h, chr);
|
|
|
|
|
put_data(h, s->session_id, s->session_id_len);
|
|
|
|
|
ssh_hash_final(h, key);
|
|
|
|
|
|
|
|
|
|
/* Subsequent blocks of hlen bytes. */
|
|
|
|
|
if (keylen_padded > hlen) {
|
|
|
|
|
int offset;
|
|
|
|
|
|
|
|
|
|
h = ssh_hash_new(s->kex_alg->hash);
|
|
|
|
|
if (!(s->ppl.remote_bugs & BUG_SSH2_DERIVEKEY))
|
|
|
|
|
put_mp_ssh2(h, K);
|
|
|
|
|
put_data(h, H, hlen);
|
|
|
|
|
|
|
|
|
|
for (offset = hlen; offset < keylen_padded; offset += hlen) {
|
|
|
|
|
put_data(h, key + offset - hlen, hlen);
|
|
|
|
|
ssh_hash *h2 = ssh_hash_copy(h);
|
|
|
|
|
ssh_hash_final(h2, key + offset);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ssh_hash_free(h);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Find a slot in a KEXINIT algorithm list to use for a new algorithm.
|
|
|
|
|
* If the algorithm is already in the list, return a pointer to its
|
|
|
|
|
* entry, otherwise return an entry from the end of the list.
|
|
|
|
|
* This assumes that every time a particular name is passed in, it
|
|
|
|
|
* comes from the same string constant. If this isn't true, this
|
|
|
|
|
* function may need to be rewritten to use strcmp() instead.
|
|
|
|
|
*/
|
|
|
|
|
static struct kexinit_algorithm *ssh2_kexinit_addalg(struct kexinit_algorithm
|
|
|
|
|
*list, const char *name)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < MAXKEXLIST; i++)
|
|
|
|
|
if (list[i].name == NULL || list[i].name == name) {
|
|
|
|
|
list[i].name = name;
|
|
|
|
|
return &list[i];
|
|
|
|
|
}
|
|
|
|
|
assert(!"No space in KEXINIT list");
|
|
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int ssh2_common_filter_queue(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
|
|
|
|
static const char *const ssh2_disconnect_reasons[] = {
|
|
|
|
|
NULL,
|
|
|
|
|
"host not allowed to connect",
|
|
|
|
|
"protocol error",
|
|
|
|
|
"key exchange failed",
|
|
|
|
|
"host authentication failed",
|
|
|
|
|
"MAC error",
|
|
|
|
|
"compression error",
|
|
|
|
|
"service not available",
|
|
|
|
|
"protocol version not supported",
|
|
|
|
|
"host key not verifiable",
|
|
|
|
|
"connection lost",
|
|
|
|
|
"by application",
|
|
|
|
|
"too many connections",
|
|
|
|
|
"auth cancelled by user",
|
|
|
|
|
"no more auth methods available",
|
|
|
|
|
"illegal user name",
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
PktIn *pktin;
|
|
|
|
|
ptrlen msg;
|
|
|
|
|
int reason;
|
|
|
|
|
|
|
|
|
|
while ((pktin = pq_peek(ppl->in_pq)) != NULL) {
|
|
|
|
|
switch (pktin->type) {
|
|
|
|
|
case SSH2_MSG_DISCONNECT:
|
|
|
|
|
reason = get_uint32(pktin);
|
|
|
|
|
msg = get_string(pktin);
|
|
|
|
|
|
|
|
|
|
ssh_remote_error(
|
2018-10-20 23:52:45 +03:00
|
|
|
ppl->ssh, "Remote side sent disconnect message\n"
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
"type %d (%s):\n\"%.*s\"", reason,
|
|
|
|
|
((reason > 0 && reason < lenof(ssh2_disconnect_reasons)) ?
|
|
|
|
|
ssh2_disconnect_reasons[reason] : "unknown"),
|
|
|
|
|
PTRLEN_PRINTF(msg));
|
2018-10-13 19:16:07 +03:00
|
|
|
pq_pop(ppl->in_pq);
|
2018-10-29 22:50:29 +03:00
|
|
|
return true; /* indicate that we've been freed */
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
case SSH2_MSG_DEBUG:
|
|
|
|
|
/* XXX maybe we should actually take notice of the return value */
|
|
|
|
|
get_bool(pktin);
|
|
|
|
|
msg = get_string(pktin);
|
|
|
|
|
ppl_logevent(("Remote debug message: %.*s", PTRLEN_PRINTF(msg)));
|
|
|
|
|
pq_pop(ppl->in_pq);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SSH2_MSG_IGNORE:
|
|
|
|
|
/* Do nothing, because we're ignoring it! Duhh. */
|
|
|
|
|
pq_pop(ppl->in_pq);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
default:
|
2018-10-29 22:50:29 +03:00
|
|
|
return false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2018-10-29 22:50:29 +03:00
|
|
|
return false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh2_transport_filter_queue(struct ssh2_transport_state *s)
|
|
|
|
|
{
|
|
|
|
|
PktIn *pktin;
|
|
|
|
|
|
|
|
|
|
while (1) {
|
|
|
|
|
if (ssh2_common_filter_queue(&s->ppl))
|
2018-10-29 22:50:29 +03:00
|
|
|
return true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
if ((pktin = pq_peek(s->ppl.in_pq)) == NULL)
|
2018-10-29 22:50:29 +03:00
|
|
|
return false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
/* Pass on packets to the next layer if they're outside
|
|
|
|
|
* the range reserved for the transport protocol. */
|
|
|
|
|
if (pktin->type >= 50) {
|
|
|
|
|
/* ... except that we shouldn't tolerate higher-layer
|
|
|
|
|
* packets coming from the server before we've seen
|
|
|
|
|
* the first NEWKEYS. */
|
|
|
|
|
if (!s->higher_layer_ok) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Received premature higher-"
|
|
|
|
|
"layer packet, type %d (%s)", pktin->type,
|
|
|
|
|
ssh2_pkt_type(s->ppl.bpp->pls->kctx,
|
|
|
|
|
s->ppl.bpp->pls->actx,
|
|
|
|
|
pktin->type));
|
2018-10-29 22:50:29 +03:00
|
|
|
return true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pq_pop(s->ppl.in_pq);
|
|
|
|
|
pq_push(&s->pq_in_higher, pktin);
|
|
|
|
|
} else {
|
|
|
|
|
/* Anything else is a transport-layer packet that the main
|
|
|
|
|
* process_queue coroutine should handle. */
|
2018-10-29 22:50:29 +03:00
|
|
|
return false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
PktIn *ssh2_transport_pop(struct ssh2_transport_state *s)
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
{
|
|
|
|
|
ssh2_transport_filter_queue(s);
|
|
|
|
|
return pq_pop(s->ppl.in_pq);
|
|
|
|
|
}
|
|
|
|
|
|
2018-10-06 15:46:13 +03:00
|
|
|
static void ssh2_write_kexinit_lists(
|
|
|
|
|
BinarySink *pktout,
|
|
|
|
|
struct kexinit_algorithm kexlists[NKEXLIST][MAXKEXLIST],
|
|
|
|
|
Conf *conf, int remote_bugs,
|
|
|
|
|
const char *hk_host, int hk_port, const ssh_keyalg *hk_prev,
|
|
|
|
|
ssh_transient_hostkey_cache *thc,
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
ssh_key *const *our_hostkeys, int our_nhostkeys,
|
2018-10-06 15:46:13 +03:00
|
|
|
int first_time, int can_gssapi_keyex, int transient_hostkey_mode)
|
|
|
|
|
{
|
|
|
|
|
int i, j, k, warn;
|
|
|
|
|
|
|
|
|
|
int n_preferred_kex;
|
|
|
|
|
const struct ssh_kexes *preferred_kex[KEX_MAX + 1]; /* +1 for GSSAPI */
|
|
|
|
|
int n_preferred_hk;
|
|
|
|
|
int preferred_hk[HK_MAX];
|
|
|
|
|
int n_preferred_ciphers;
|
|
|
|
|
const struct ssh2_ciphers *preferred_ciphers[CIPHER_MAX];
|
|
|
|
|
const struct ssh_compression_alg *preferred_comp;
|
|
|
|
|
const struct ssh2_macalg *const *maclist;
|
|
|
|
|
int nmacs;
|
|
|
|
|
|
|
|
|
|
struct kexinit_algorithm *alg;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Set up the preferred key exchange. (NULL => warn below here)
|
|
|
|
|
*/
|
|
|
|
|
n_preferred_kex = 0;
|
|
|
|
|
if (can_gssapi_keyex)
|
|
|
|
|
preferred_kex[n_preferred_kex++] = &ssh_gssk5_sha1_kex;
|
|
|
|
|
for (i = 0; i < KEX_MAX; i++) {
|
|
|
|
|
switch (conf_get_int_int(conf, CONF_ssh_kexlist, i)) {
|
|
|
|
|
case KEX_DHGEX:
|
|
|
|
|
preferred_kex[n_preferred_kex++] =
|
|
|
|
|
&ssh_diffiehellman_gex;
|
|
|
|
|
break;
|
|
|
|
|
case KEX_DHGROUP14:
|
|
|
|
|
preferred_kex[n_preferred_kex++] =
|
|
|
|
|
&ssh_diffiehellman_group14;
|
|
|
|
|
break;
|
|
|
|
|
case KEX_DHGROUP1:
|
|
|
|
|
preferred_kex[n_preferred_kex++] =
|
|
|
|
|
&ssh_diffiehellman_group1;
|
|
|
|
|
break;
|
|
|
|
|
case KEX_RSA:
|
|
|
|
|
preferred_kex[n_preferred_kex++] =
|
|
|
|
|
&ssh_rsa_kex;
|
|
|
|
|
break;
|
|
|
|
|
case KEX_ECDH:
|
|
|
|
|
preferred_kex[n_preferred_kex++] =
|
|
|
|
|
&ssh_ecdh_kex;
|
|
|
|
|
break;
|
|
|
|
|
case KEX_WARN:
|
|
|
|
|
/* Flag for later. Don't bother if it's the last in
|
|
|
|
|
* the list. */
|
|
|
|
|
if (i < KEX_MAX - 1) {
|
|
|
|
|
preferred_kex[n_preferred_kex++] = NULL;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Set up the preferred host key types. These are just the ids
|
|
|
|
|
* in the enum in putty.h, so 'warn below here' is indicated
|
|
|
|
|
* by HK_WARN.
|
|
|
|
|
*/
|
|
|
|
|
n_preferred_hk = 0;
|
|
|
|
|
for (i = 0; i < HK_MAX; i++) {
|
|
|
|
|
int id = conf_get_int_int(conf, CONF_ssh_hklist, i);
|
|
|
|
|
/* As above, don't bother with HK_WARN if it's last in the
|
|
|
|
|
* list */
|
|
|
|
|
if (id != HK_WARN || i < HK_MAX - 1)
|
|
|
|
|
preferred_hk[n_preferred_hk++] = id;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Set up the preferred ciphers. (NULL => warn below here)
|
|
|
|
|
*/
|
|
|
|
|
n_preferred_ciphers = 0;
|
|
|
|
|
for (i = 0; i < CIPHER_MAX; i++) {
|
|
|
|
|
switch (conf_get_int_int(conf, CONF_ssh_cipherlist, i)) {
|
|
|
|
|
case CIPHER_BLOWFISH:
|
|
|
|
|
preferred_ciphers[n_preferred_ciphers++] = &ssh2_blowfish;
|
|
|
|
|
break;
|
|
|
|
|
case CIPHER_DES:
|
|
|
|
|
if (conf_get_int(conf, CONF_ssh2_des_cbc))
|
|
|
|
|
preferred_ciphers[n_preferred_ciphers++] = &ssh2_des;
|
|
|
|
|
break;
|
|
|
|
|
case CIPHER_3DES:
|
|
|
|
|
preferred_ciphers[n_preferred_ciphers++] = &ssh2_3des;
|
|
|
|
|
break;
|
|
|
|
|
case CIPHER_AES:
|
|
|
|
|
preferred_ciphers[n_preferred_ciphers++] = &ssh2_aes;
|
|
|
|
|
break;
|
|
|
|
|
case CIPHER_ARCFOUR:
|
|
|
|
|
preferred_ciphers[n_preferred_ciphers++] = &ssh2_arcfour;
|
|
|
|
|
break;
|
|
|
|
|
case CIPHER_CHACHA20:
|
|
|
|
|
preferred_ciphers[n_preferred_ciphers++] = &ssh2_ccp;
|
|
|
|
|
break;
|
|
|
|
|
case CIPHER_WARN:
|
|
|
|
|
/* Flag for later. Don't bother if it's the last in
|
|
|
|
|
* the list. */
|
|
|
|
|
if (i < CIPHER_MAX - 1) {
|
|
|
|
|
preferred_ciphers[n_preferred_ciphers++] = NULL;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Set up preferred compression.
|
|
|
|
|
*/
|
|
|
|
|
if (conf_get_int(conf, CONF_compression))
|
|
|
|
|
preferred_comp = &ssh_zlib;
|
|
|
|
|
else
|
|
|
|
|
preferred_comp = &ssh_comp_none;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < NKEXLIST; i++)
|
|
|
|
|
for (j = 0; j < MAXKEXLIST; j++)
|
|
|
|
|
kexlists[i][j].name = NULL;
|
|
|
|
|
/* List key exchange algorithms. */
|
2018-10-29 22:50:29 +03:00
|
|
|
warn = false;
|
2018-10-06 15:46:13 +03:00
|
|
|
for (i = 0; i < n_preferred_kex; i++) {
|
|
|
|
|
const struct ssh_kexes *k = preferred_kex[i];
|
2018-10-29 22:50:29 +03:00
|
|
|
if (!k) warn = true;
|
2018-10-06 15:46:13 +03:00
|
|
|
else for (j = 0; j < k->nkexes; j++) {
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[KEXLIST_KEX],
|
|
|
|
|
k->list[j]->name);
|
|
|
|
|
alg->u.kex.kex = k->list[j];
|
|
|
|
|
alg->u.kex.warn = warn;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
/* List server host key algorithms. */
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
if (our_hostkeys) {
|
|
|
|
|
/*
|
|
|
|
|
* In server mode, we just list the algorithms that match the
|
|
|
|
|
* host keys we actually have.
|
|
|
|
|
*/
|
|
|
|
|
for (i = 0; i < our_nhostkeys; i++) {
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[KEXLIST_HOSTKEY],
|
|
|
|
|
ssh_key_alg(our_hostkeys[i])->ssh_id);
|
|
|
|
|
alg->u.hk.hostkey = ssh_key_alg(our_hostkeys[i]);
|
2018-10-29 22:50:29 +03:00
|
|
|
alg->u.hk.warn = false;
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
}
|
|
|
|
|
} else if (first_time) {
|
2018-10-06 15:46:13 +03:00
|
|
|
/*
|
|
|
|
|
* In the first key exchange, we list all the algorithms
|
|
|
|
|
* we're prepared to cope with, but prefer those algorithms
|
|
|
|
|
* for which we have a host key for this host.
|
|
|
|
|
*
|
|
|
|
|
* If the host key algorithm is below the warning
|
|
|
|
|
* threshold, we warn even if we did already have a key
|
|
|
|
|
* for it, on the basis that if the user has just
|
|
|
|
|
* reconfigured that host key type to be warned about,
|
|
|
|
|
* they surely _do_ want to be alerted that a server
|
|
|
|
|
* they're actually connecting to is using it.
|
|
|
|
|
*/
|
2018-10-29 22:50:29 +03:00
|
|
|
warn = false;
|
2018-10-06 15:46:13 +03:00
|
|
|
for (i = 0; i < n_preferred_hk; i++) {
|
|
|
|
|
if (preferred_hk[i] == HK_WARN)
|
2018-10-29 22:50:29 +03:00
|
|
|
warn = true;
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
for (j = 0; j < lenof(ssh2_hostkey_algs); j++) {
|
|
|
|
|
if (ssh2_hostkey_algs[j].id != preferred_hk[i])
|
2018-10-06 15:46:13 +03:00
|
|
|
continue;
|
|
|
|
|
if (have_ssh_host_key(hk_host, hk_port,
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
ssh2_hostkey_algs[j].alg->cache_id)) {
|
2018-10-06 15:46:13 +03:00
|
|
|
alg = ssh2_kexinit_addalg(kexlists[KEXLIST_HOSTKEY],
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
ssh2_hostkey_algs[j].alg->ssh_id);
|
|
|
|
|
alg->u.hk.hostkey = ssh2_hostkey_algs[j].alg;
|
2018-10-06 15:46:13 +03:00
|
|
|
alg->u.hk.warn = warn;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
2018-10-29 22:50:29 +03:00
|
|
|
warn = false;
|
2018-10-06 15:46:13 +03:00
|
|
|
for (i = 0; i < n_preferred_hk; i++) {
|
|
|
|
|
if (preferred_hk[i] == HK_WARN)
|
2018-10-29 22:50:29 +03:00
|
|
|
warn = true;
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
for (j = 0; j < lenof(ssh2_hostkey_algs); j++) {
|
|
|
|
|
if (ssh2_hostkey_algs[j].id != preferred_hk[i])
|
2018-10-06 15:46:13 +03:00
|
|
|
continue;
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[KEXLIST_HOSTKEY],
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
ssh2_hostkey_algs[j].alg->ssh_id);
|
|
|
|
|
alg->u.hk.hostkey = ssh2_hostkey_algs[j].alg;
|
2018-10-06 15:46:13 +03:00
|
|
|
alg->u.hk.warn = warn;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
#ifndef NO_GSSAPI
|
|
|
|
|
} else if (transient_hostkey_mode) {
|
|
|
|
|
/*
|
|
|
|
|
* If we've previously done a GSSAPI KEX, then we list
|
|
|
|
|
* precisely the algorithms for which a previous GSS key
|
|
|
|
|
* exchange has delivered us a host key, because we expect
|
|
|
|
|
* one of exactly those keys to be used in any subsequent
|
|
|
|
|
* non-GSS-based rekey.
|
|
|
|
|
*
|
|
|
|
|
* An exception is if this is the key exchange we
|
|
|
|
|
* triggered for the purposes of populating that cache -
|
|
|
|
|
* in which case the cache will currently be empty, which
|
|
|
|
|
* isn't helpful!
|
|
|
|
|
*/
|
2018-10-29 22:50:29 +03:00
|
|
|
warn = false;
|
2018-10-06 15:46:13 +03:00
|
|
|
for (i = 0; i < n_preferred_hk; i++) {
|
|
|
|
|
if (preferred_hk[i] == HK_WARN)
|
2018-10-29 22:50:29 +03:00
|
|
|
warn = true;
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
for (j = 0; j < lenof(ssh2_hostkey_algs); j++) {
|
|
|
|
|
if (ssh2_hostkey_algs[j].id != preferred_hk[i])
|
2018-10-06 15:46:13 +03:00
|
|
|
continue;
|
|
|
|
|
if (ssh_transient_hostkey_cache_has(
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
thc, ssh2_hostkey_algs[j].alg)) {
|
2018-10-06 15:46:13 +03:00
|
|
|
alg = ssh2_kexinit_addalg(kexlists[KEXLIST_HOSTKEY],
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
ssh2_hostkey_algs[j].alg->ssh_id);
|
|
|
|
|
alg->u.hk.hostkey = ssh2_hostkey_algs[j].alg;
|
2018-10-06 15:46:13 +03:00
|
|
|
alg->u.hk.warn = warn;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
} else {
|
|
|
|
|
/*
|
|
|
|
|
* In subsequent key exchanges, we list only the host key
|
|
|
|
|
* algorithm that was selected in the first key exchange,
|
|
|
|
|
* so that we keep getting the same host key and hence
|
|
|
|
|
* don't have to interrupt the user's session to ask for
|
|
|
|
|
* reverification.
|
|
|
|
|
*/
|
|
|
|
|
assert(hk_prev);
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[KEXLIST_HOSTKEY], hk_prev->ssh_id);
|
|
|
|
|
alg->u.hk.hostkey = hk_prev;
|
2018-10-29 22:50:29 +03:00
|
|
|
alg->u.hk.warn = false;
|
2018-10-06 15:46:13 +03:00
|
|
|
}
|
|
|
|
|
if (can_gssapi_keyex) {
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[KEXLIST_HOSTKEY], "null");
|
|
|
|
|
alg->u.hk.hostkey = NULL;
|
|
|
|
|
}
|
|
|
|
|
/* List encryption algorithms (client->server then server->client). */
|
|
|
|
|
for (k = KEXLIST_CSCIPHER; k <= KEXLIST_SCCIPHER; k++) {
|
2018-10-29 22:50:29 +03:00
|
|
|
warn = false;
|
2018-10-06 15:46:13 +03:00
|
|
|
#ifdef FUZZING
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[k], "none");
|
|
|
|
|
alg->u.cipher.cipher = NULL;
|
|
|
|
|
alg->u.cipher.warn = warn;
|
|
|
|
|
#endif /* FUZZING */
|
|
|
|
|
for (i = 0; i < n_preferred_ciphers; i++) {
|
|
|
|
|
const struct ssh2_ciphers *c = preferred_ciphers[i];
|
2018-10-29 22:50:29 +03:00
|
|
|
if (!c) warn = true;
|
2018-10-06 15:46:13 +03:00
|
|
|
else for (j = 0; j < c->nciphers; j++) {
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[k],
|
|
|
|
|
c->list[j]->name);
|
|
|
|
|
alg->u.cipher.cipher = c->list[j];
|
|
|
|
|
alg->u.cipher.warn = warn;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Be prepared to work around the buggy MAC problem.
|
|
|
|
|
*/
|
|
|
|
|
if (remote_bugs & BUG_SSH2_HMAC) {
|
|
|
|
|
maclist = buggymacs;
|
|
|
|
|
nmacs = lenof(buggymacs);
|
|
|
|
|
} else {
|
|
|
|
|
maclist = macs;
|
|
|
|
|
nmacs = lenof(macs);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* List MAC algorithms (client->server then server->client). */
|
|
|
|
|
for (j = KEXLIST_CSMAC; j <= KEXLIST_SCMAC; j++) {
|
|
|
|
|
#ifdef FUZZING
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[j], "none");
|
|
|
|
|
alg->u.mac.mac = NULL;
|
2018-10-29 22:50:29 +03:00
|
|
|
alg->u.mac.etm = false;
|
2018-10-06 15:46:13 +03:00
|
|
|
#endif /* FUZZING */
|
|
|
|
|
for (i = 0; i < nmacs; i++) {
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[j], maclist[i]->name);
|
|
|
|
|
alg->u.mac.mac = maclist[i];
|
2018-10-29 22:50:29 +03:00
|
|
|
alg->u.mac.etm = false;
|
2018-10-06 15:46:13 +03:00
|
|
|
}
|
|
|
|
|
for (i = 0; i < nmacs; i++) {
|
|
|
|
|
/* For each MAC, there may also be an ETM version,
|
|
|
|
|
* which we list second. */
|
|
|
|
|
if (maclist[i]->etm_name) {
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[j], maclist[i]->etm_name);
|
|
|
|
|
alg->u.mac.mac = maclist[i];
|
2018-10-29 22:50:29 +03:00
|
|
|
alg->u.mac.etm = true;
|
2018-10-06 15:46:13 +03:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* List client->server compression algorithms,
|
|
|
|
|
* then server->client compression algorithms. (We use the
|
|
|
|
|
* same set twice.) */
|
|
|
|
|
for (j = KEXLIST_CSCOMP; j <= KEXLIST_SCCOMP; j++) {
|
|
|
|
|
assert(lenof(compressions) > 1);
|
|
|
|
|
/* Prefer non-delayed versions */
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[j], preferred_comp->name);
|
|
|
|
|
alg->u.comp.comp = preferred_comp;
|
2018-10-29 22:50:29 +03:00
|
|
|
alg->u.comp.delayed = false;
|
2018-10-06 15:46:13 +03:00
|
|
|
if (preferred_comp->delayed_name) {
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[j],
|
|
|
|
|
preferred_comp->delayed_name);
|
|
|
|
|
alg->u.comp.comp = preferred_comp;
|
2018-10-29 22:50:29 +03:00
|
|
|
alg->u.comp.delayed = true;
|
2018-10-06 15:46:13 +03:00
|
|
|
}
|
|
|
|
|
for (i = 0; i < lenof(compressions); i++) {
|
|
|
|
|
const struct ssh_compression_alg *c = compressions[i];
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[j], c->name);
|
|
|
|
|
alg->u.comp.comp = c;
|
2018-10-29 22:50:29 +03:00
|
|
|
alg->u.comp.delayed = false;
|
2018-10-06 15:46:13 +03:00
|
|
|
if (c->delayed_name) {
|
|
|
|
|
alg = ssh2_kexinit_addalg(kexlists[j], c->delayed_name);
|
|
|
|
|
alg->u.comp.comp = c;
|
2018-10-29 22:50:29 +03:00
|
|
|
alg->u.comp.delayed = true;
|
2018-10-06 15:46:13 +03:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Finally, format the lists into text and write them into the
|
|
|
|
|
* outgoing KEXINIT packet.
|
|
|
|
|
*/
|
|
|
|
|
for (i = 0; i < NKEXLIST; i++) {
|
|
|
|
|
strbuf *list = strbuf_new();
|
|
|
|
|
for (j = 0; j < MAXKEXLIST; j++) {
|
|
|
|
|
if (kexlists[i][j].name == NULL) break;
|
|
|
|
|
add_to_commasep(list, kexlists[i][j].name);
|
|
|
|
|
}
|
|
|
|
|
put_stringsb(pktout, list);
|
|
|
|
|
}
|
|
|
|
|
/* List client->server languages. Empty list. */
|
|
|
|
|
put_stringz(pktout, "");
|
|
|
|
|
/* List server->client languages. Empty list. */
|
|
|
|
|
put_stringz(pktout, "");
|
|
|
|
|
}
|
|
|
|
|
|
2018-10-07 15:51:04 +03:00
|
|
|
static int ssh2_scan_kexinits(
|
|
|
|
|
ptrlen client_kexinit, ptrlen server_kexinit,
|
|
|
|
|
struct kexinit_algorithm kexlists[NKEXLIST][MAXKEXLIST],
|
|
|
|
|
const struct ssh_kex **kex_alg, const ssh_keyalg **hostkey_alg,
|
|
|
|
|
transport_direction *cs, transport_direction *sc,
|
|
|
|
|
int *warn_kex, int *warn_hk, int *warn_cscipher, int *warn_sccipher,
|
|
|
|
|
Ssh *ssh, int *ignore_guess_cs_packet, int *ignore_guess_sc_packet,
|
|
|
|
|
int *n_server_hostkeys, int server_hostkeys[MAXKEXLIST])
|
|
|
|
|
{
|
|
|
|
|
BinarySource client[1], server[1];
|
|
|
|
|
int i;
|
|
|
|
|
int guess_correct;
|
|
|
|
|
ptrlen clists[NKEXLIST], slists[NKEXLIST];
|
|
|
|
|
const struct kexinit_algorithm *selected[NKEXLIST];
|
|
|
|
|
|
|
|
|
|
BinarySource_BARE_INIT(client, client_kexinit.ptr, client_kexinit.len);
|
|
|
|
|
BinarySource_BARE_INIT(server, server_kexinit.ptr, server_kexinit.len);
|
|
|
|
|
|
|
|
|
|
/* Skip packet type bytes and random cookies. */
|
|
|
|
|
get_data(client, 1 + 16);
|
|
|
|
|
get_data(server, 1 + 16);
|
|
|
|
|
|
2018-10-29 22:50:29 +03:00
|
|
|
guess_correct = true;
|
2018-10-07 15:51:04 +03:00
|
|
|
|
|
|
|
|
/* Find the matching string in each list, and map it to its
|
|
|
|
|
* kexinit_algorithm structure. */
|
|
|
|
|
for (i = 0; i < NKEXLIST; i++) {
|
|
|
|
|
ptrlen clist, slist, cword, sword, found;
|
|
|
|
|
int cfirst, sfirst, j;
|
|
|
|
|
|
|
|
|
|
clists[i] = get_string(client);
|
|
|
|
|
slists[i] = get_string(server);
|
|
|
|
|
if (get_err(client) || get_err(server)) {
|
|
|
|
|
/* Report a better error than the spurious "Couldn't
|
|
|
|
|
* agree" that we'd generate if we pressed on regardless
|
|
|
|
|
* and treated the empty get_string() result as genuine */
|
|
|
|
|
ssh_proto_error(ssh, "KEXINIT packet was incomplete");
|
2018-10-29 22:50:29 +03:00
|
|
|
return false;
|
2018-10-07 15:51:04 +03:00
|
|
|
}
|
|
|
|
|
|
2018-10-29 22:50:29 +03:00
|
|
|
for (cfirst = true, clist = clists[i];
|
|
|
|
|
get_commasep_word(&clist, &cword); cfirst = false)
|
|
|
|
|
for (sfirst = true, slist = slists[i];
|
|
|
|
|
get_commasep_word(&slist, &sword); sfirst = false)
|
2018-10-07 15:51:04 +03:00
|
|
|
if (ptrlen_eq_ptrlen(cword, sword)) {
|
|
|
|
|
found = cword;
|
|
|
|
|
goto found_match;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* No matching string found in the two lists. Delay reporting
|
|
|
|
|
* a fatal error until below, because sometimes it turns out
|
|
|
|
|
* not to be fatal. */
|
|
|
|
|
selected[i] = NULL;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* However, even if a failure to agree on any algorithm at all
|
|
|
|
|
* is not completely fatal (e.g. because it's the MAC
|
|
|
|
|
* negotiation for a cipher that comes with a built-in MAC),
|
|
|
|
|
* it still invalidates the guessed key exchange packet. (RFC
|
|
|
|
|
* 4253 section 7, not contradicted by OpenSSH's
|
|
|
|
|
* PROTOCOL.chacha20poly1305 or as far as I can see by their
|
|
|
|
|
* code.)
|
|
|
|
|
*/
|
2018-10-29 22:50:29 +03:00
|
|
|
guess_correct = false;
|
2018-10-07 15:51:04 +03:00
|
|
|
|
|
|
|
|
continue;
|
|
|
|
|
|
|
|
|
|
found_match:
|
|
|
|
|
|
|
|
|
|
selected[i] = NULL;
|
|
|
|
|
for (j = 0; j < MAXKEXLIST; j++) {
|
|
|
|
|
if (ptrlen_eq_string(found, kexlists[i][j].name)) {
|
|
|
|
|
selected[i] = &kexlists[i][j];
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
assert(selected[i]); /* kexlists[] must cover one of the inputs */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If the kex or host key algorithm is not the first one in
|
|
|
|
|
* both sides' lists, that means the guessed key exchange
|
|
|
|
|
* packet (if any) is officially wrong.
|
|
|
|
|
*/
|
|
|
|
|
if ((i == KEXLIST_KEX || i == KEXLIST_HOSTKEY) && !(cfirst || sfirst))
|
2018-10-29 22:50:29 +03:00
|
|
|
guess_correct = false;
|
2018-10-07 15:51:04 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Skip language strings in both KEXINITs, and read the flags
|
|
|
|
|
* saying whether a guessed KEX packet follows.
|
|
|
|
|
*/
|
|
|
|
|
get_string(client);
|
|
|
|
|
get_string(client);
|
|
|
|
|
get_string(server);
|
|
|
|
|
get_string(server);
|
|
|
|
|
if (ignore_guess_cs_packet)
|
|
|
|
|
*ignore_guess_cs_packet = get_bool(client) && !guess_correct;
|
|
|
|
|
if (ignore_guess_sc_packet)
|
|
|
|
|
*ignore_guess_sc_packet = get_bool(server) && !guess_correct;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Now transcribe the selected algorithm set into the output data.
|
|
|
|
|
*/
|
|
|
|
|
for (i = 0; i < NKEXLIST; i++) {
|
|
|
|
|
const struct kexinit_algorithm *alg;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If we've already selected a cipher which requires a
|
|
|
|
|
* particular MAC, then just select that. This is the case in
|
|
|
|
|
* which it's not a fatal error if the actual MAC string lists
|
|
|
|
|
* didn't include any matching error.
|
|
|
|
|
*/
|
|
|
|
|
if (i == KEXLIST_CSMAC && cs->cipher &&
|
|
|
|
|
cs->cipher->required_mac) {
|
|
|
|
|
cs->mac = cs->cipher->required_mac;
|
|
|
|
|
cs->etm_mode = !!(cs->mac->etm_name);
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
if (i == KEXLIST_SCMAC && sc->cipher &&
|
|
|
|
|
sc->cipher->required_mac) {
|
|
|
|
|
sc->mac = sc->cipher->required_mac;
|
|
|
|
|
sc->etm_mode = !!(sc->mac->etm_name);
|
|
|
|
|
continue;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
alg = selected[i];
|
|
|
|
|
if (!alg) {
|
|
|
|
|
/*
|
|
|
|
|
* Otherwise, any match failure _is_ a fatal error.
|
|
|
|
|
*/
|
|
|
|
|
ssh_sw_abort(ssh, "Couldn't agree a %s (available: %.*s)",
|
|
|
|
|
kexlist_descr[i], PTRLEN_PRINTF(slists[i]));
|
2018-10-29 22:50:29 +03:00
|
|
|
return false;
|
2018-10-07 15:51:04 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
switch (i) {
|
|
|
|
|
case KEXLIST_KEX:
|
|
|
|
|
*kex_alg = alg->u.kex.kex;
|
|
|
|
|
*warn_kex = alg->u.kex.warn;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case KEXLIST_HOSTKEY:
|
|
|
|
|
/*
|
|
|
|
|
* Ignore an unexpected/inappropriate offer of "null",
|
|
|
|
|
* we offer "null" when we're willing to use GSS KEX,
|
|
|
|
|
* but it is only acceptable when GSSKEX is actually
|
|
|
|
|
* selected.
|
|
|
|
|
*/
|
|
|
|
|
if (alg->u.hk.hostkey == NULL &&
|
|
|
|
|
(*kex_alg)->main_type != KEXTYPE_GSS)
|
|
|
|
|
continue;
|
|
|
|
|
|
|
|
|
|
*hostkey_alg = alg->u.hk.hostkey;
|
|
|
|
|
*warn_hk = alg->u.hk.warn;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case KEXLIST_CSCIPHER:
|
|
|
|
|
cs->cipher = alg->u.cipher.cipher;
|
|
|
|
|
*warn_cscipher = alg->u.cipher.warn;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case KEXLIST_SCCIPHER:
|
|
|
|
|
sc->cipher = alg->u.cipher.cipher;
|
|
|
|
|
*warn_sccipher = alg->u.cipher.warn;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case KEXLIST_CSMAC:
|
|
|
|
|
cs->mac = alg->u.mac.mac;
|
|
|
|
|
cs->etm_mode = alg->u.mac.etm;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case KEXLIST_SCMAC:
|
|
|
|
|
sc->mac = alg->u.mac.mac;
|
|
|
|
|
sc->etm_mode = alg->u.mac.etm;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case KEXLIST_CSCOMP:
|
|
|
|
|
cs->comp = alg->u.comp.comp;
|
|
|
|
|
cs->comp_delayed = alg->u.comp.delayed;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case KEXLIST_SCCOMP:
|
|
|
|
|
sc->comp = alg->u.comp.comp;
|
|
|
|
|
sc->comp_delayed = alg->u.comp.delayed;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
default:
|
2018-10-29 22:50:29 +03:00
|
|
|
assert(false && "Bad list index in scan_kexinits");
|
2018-10-07 15:51:04 +03:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (server_hostkeys) {
|
|
|
|
|
/*
|
|
|
|
|
* Finally, make an auxiliary pass over the server's host key
|
|
|
|
|
* list to find all the host key algorithms offered by the
|
|
|
|
|
* server which we know about at all, whether we selected each
|
|
|
|
|
* one or not. We return these as a list of indices into the
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
* constant ssh2_hostkey_algs[] array.
|
2018-10-07 15:51:04 +03:00
|
|
|
*/
|
|
|
|
|
*n_server_hostkeys = 0;
|
|
|
|
|
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
for (i = 0; i < lenof(ssh2_hostkey_algs); i++)
|
|
|
|
|
if (in_commasep_string(ssh2_hostkey_algs[i].alg->ssh_id,
|
2018-10-07 15:51:04 +03:00
|
|
|
slists[KEXLIST_HOSTKEY].ptr,
|
|
|
|
|
slists[KEXLIST_HOSTKEY].len))
|
|
|
|
|
server_hostkeys[(*n_server_hostkeys)++] = i;
|
|
|
|
|
}
|
|
|
|
|
|
2018-10-29 22:50:29 +03:00
|
|
|
return true;
|
2018-10-07 15:51:04 +03:00
|
|
|
}
|
|
|
|
|
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
void ssh2transport_finalise_exhash(struct ssh2_transport_state *s)
|
|
|
|
|
{
|
|
|
|
|
put_mp_ssh2(s->exhash, s->K);
|
|
|
|
|
assert(ssh_hash_alg(s->exhash)->hlen <= sizeof(s->exchange_hash));
|
|
|
|
|
ssh_hash_final(s->exhash, s->exchange_hash);
|
|
|
|
|
s->exhash = NULL;
|
|
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
|
debug(("Exchange hash is:\n"));
|
|
|
|
|
dmemdump(s->exchange_hash, s->kex_alg->hash->hlen);
|
|
|
|
|
#endif
|
|
|
|
|
}
|
|
|
|
|
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
static void ssh2_transport_process_queue(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh2_transport_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh2_transport_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
PktIn *pktin;
|
|
|
|
|
PktOut *pktout;
|
|
|
|
|
|
|
|
|
|
/* Filter centrally handled messages off the front of the queue on
|
|
|
|
|
* every entry to this coroutine, no matter where we're resuming
|
|
|
|
|
* from, even if we're _not_ looping on pq_pop. That way we can
|
|
|
|
|
* still proactively handle those messages even if we're waiting
|
|
|
|
|
* for a user response. */
|
|
|
|
|
ssh2_transport_filter_queue(s);
|
|
|
|
|
|
|
|
|
|
crBegin(s->crState);
|
|
|
|
|
|
|
|
|
|
s->in.cipher = s->out.cipher = NULL;
|
|
|
|
|
s->in.mac = s->out.mac = NULL;
|
|
|
|
|
s->in.comp = s->out.comp = NULL;
|
|
|
|
|
|
2018-10-29 22:50:29 +03:00
|
|
|
s->got_session_id = false;
|
|
|
|
|
s->need_gss_transient_hostkey = false;
|
|
|
|
|
s->warned_about_no_gss_transient_hostkey = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
begin_key_exchange:
|
|
|
|
|
|
|
|
|
|
#ifndef NO_GSSAPI
|
|
|
|
|
if (s->need_gss_transient_hostkey) {
|
|
|
|
|
/*
|
|
|
|
|
* This flag indicates a special case in which we must not do
|
|
|
|
|
* GSS key exchange even if we could. (See comments below,
|
|
|
|
|
* where the flag was set on the previous key exchange.)
|
|
|
|
|
*/
|
2018-10-29 22:50:29 +03:00
|
|
|
s->can_gssapi_keyex = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
} else if (conf_get_int(s->conf, CONF_try_gssapi_kex)) {
|
|
|
|
|
/*
|
|
|
|
|
* We always check if we have GSS creds before we come up with
|
|
|
|
|
* the kex algorithm list, otherwise future rekeys will fail
|
|
|
|
|
* when creds expire. To make this so, this code section must
|
|
|
|
|
* follow the begin_key_exchange label above, otherwise this
|
|
|
|
|
* section would execute just once per-connection.
|
|
|
|
|
*
|
|
|
|
|
* Update GSS state unless the reason we're here is that a
|
|
|
|
|
* timer just checked the GSS state and decided that we should
|
|
|
|
|
* rekey to update delegated credentials. In that case, the
|
|
|
|
|
* state is "fresh".
|
|
|
|
|
*/
|
|
|
|
|
if (s->rekey_class != RK_GSS_UPDATE)
|
2018-10-29 22:50:29 +03:00
|
|
|
ssh2_transport_gss_update(s, true);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
/* Do GSSAPI KEX when capable */
|
|
|
|
|
s->can_gssapi_keyex = s->gss_status & GSS_KEX_CAPABLE;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* But not when failure is likely. [ GSS implementations may
|
|
|
|
|
* attempt (and fail) to use a ticket that is almost expired
|
|
|
|
|
* when retrieved from the ccache that actually expires by the
|
|
|
|
|
* time the server receives it. ]
|
|
|
|
|
*
|
|
|
|
|
* Note: The first time always try KEXGSS if we can, failures
|
|
|
|
|
* will be very rare, and disabling the initial GSS KEX is
|
|
|
|
|
* worse. Some day GSS libraries will ignore cached tickets
|
|
|
|
|
* whose lifetime is critically short, and will instead use
|
|
|
|
|
* fresh ones.
|
|
|
|
|
*/
|
|
|
|
|
if (!s->got_session_id && (s->gss_status & GSS_CTXT_MAYFAIL) != 0)
|
|
|
|
|
s->can_gssapi_keyex = 0;
|
|
|
|
|
s->gss_delegate = conf_get_int(s->conf, CONF_gssapifwd);
|
|
|
|
|
} else {
|
2018-10-29 22:50:29 +03:00
|
|
|
s->can_gssapi_keyex = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
s->ppl.bpp->pls->kctx = SSH2_PKTCTX_NOKEX;
|
|
|
|
|
|
2018-10-06 15:46:13 +03:00
|
|
|
/*
|
|
|
|
|
* Construct our KEXINIT packet, in a strbuf so we can refer to it
|
|
|
|
|
* later.
|
|
|
|
|
*/
|
|
|
|
|
s->client_kexinit->len = 0;
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
put_byte(s->outgoing_kexinit, SSH2_MSG_KEXINIT);
|
2018-10-06 15:46:13 +03:00
|
|
|
{
|
|
|
|
|
int i;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
for (i = 0; i < 16; i++)
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
put_byte(s->outgoing_kexinit, (unsigned char) random_byte());
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
2018-10-06 15:46:13 +03:00
|
|
|
ssh2_write_kexinit_lists(
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
BinarySink_UPCAST(s->outgoing_kexinit), s->kexlists,
|
2018-10-06 15:46:13 +03:00
|
|
|
s->conf, s->ppl.remote_bugs,
|
|
|
|
|
s->savedhost, s->savedport, s->hostkey_alg, s->thc,
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
s->hostkeys, s->nhostkeys,
|
2018-10-06 15:46:13 +03:00
|
|
|
!s->got_session_id, s->can_gssapi_keyex,
|
|
|
|
|
s->gss_kex_used && !s->need_gss_transient_hostkey);
|
|
|
|
|
/* First KEX packet does _not_ follow, because we're not that brave. */
|
2018-10-29 22:50:29 +03:00
|
|
|
put_bool(s->outgoing_kexinit, false);
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
put_uint32(s->outgoing_kexinit, 0); /* reserved */
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
2018-10-06 15:46:13 +03:00
|
|
|
/*
|
|
|
|
|
* Send our KEXINIT.
|
|
|
|
|
*/
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH2_MSG_KEXINIT);
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
put_data(pktout, s->outgoing_kexinit->u + 1,
|
|
|
|
|
s->outgoing_kexinit->len - 1); /* omit initial packet type byte */
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
|
2018-10-06 15:46:13 +03:00
|
|
|
/*
|
|
|
|
|
* Flag that KEX is in progress.
|
|
|
|
|
*/
|
2018-10-29 22:50:29 +03:00
|
|
|
s->kex_in_progress = true;
|
2018-10-06 15:46:13 +03:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Wait for the other side's KEXINIT, and save it.
|
|
|
|
|
*/
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
crMaybeWaitUntilV((pktin = ssh2_transport_pop(s)) != NULL);
|
2018-10-06 15:46:13 +03:00
|
|
|
if (pktin->type != SSH2_MSG_KEXINIT) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Received unexpected packet when "
|
|
|
|
|
"expecting KEXINIT, type %d (%s)", pktin->type,
|
|
|
|
|
ssh2_pkt_type(s->ppl.bpp->pls->kctx,
|
|
|
|
|
s->ppl.bpp->pls->actx, pktin->type));
|
|
|
|
|
return;
|
|
|
|
|
}
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
s->incoming_kexinit->len = 0;
|
|
|
|
|
put_byte(s->incoming_kexinit, SSH2_MSG_KEXINIT);
|
|
|
|
|
put_data(s->incoming_kexinit, get_ptr(pktin), get_avail(pktin));
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
/*
|
2018-10-07 15:51:04 +03:00
|
|
|
* Work through the two KEXINIT packets in parallel to find the
|
|
|
|
|
* selected algorithm identifiers.
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
*/
|
|
|
|
|
{
|
2018-10-07 15:51:04 +03:00
|
|
|
int nhk, hks[MAXKEXLIST], i, j;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
2018-10-07 15:51:04 +03:00
|
|
|
if (!ssh2_scan_kexinits(
|
|
|
|
|
ptrlen_from_strbuf(s->client_kexinit),
|
|
|
|
|
ptrlen_from_strbuf(s->server_kexinit),
|
|
|
|
|
s->kexlists, &s->kex_alg, &s->hostkey_alg, &s->out, &s->in,
|
|
|
|
|
&s->warn_kex, &s->warn_hk, &s->warn_cscipher,
|
|
|
|
|
&s->warn_sccipher, s->ppl.ssh, NULL, &s->ignorepkt, &nhk, hks))
|
2018-10-29 22:50:29 +03:00
|
|
|
return; /* false means a fatal error function was called */
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
2018-10-07 15:51:04 +03:00
|
|
|
/*
|
|
|
|
|
* In addition to deciding which host key we're actually going
|
|
|
|
|
* to use, we should make a list of the host keys offered by
|
|
|
|
|
* the server which we _don't_ have cached. These will be
|
|
|
|
|
* offered as cross-certification options by ssh_get_specials.
|
|
|
|
|
*
|
|
|
|
|
* We also count the key we're currently using for KEX as one
|
|
|
|
|
* we've already got, because by the time this menu becomes
|
|
|
|
|
* visible, it will be.
|
|
|
|
|
*/
|
|
|
|
|
s->n_uncert_hostkeys = 0;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < nhk; i++) {
|
|
|
|
|
j = hks[i];
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
if (ssh2_hostkey_algs[j].alg != s->hostkey_alg &&
|
2018-10-07 15:51:04 +03:00
|
|
|
!have_ssh_host_key(s->savedhost, s->savedport,
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
ssh2_hostkey_algs[j].alg->cache_id)) {
|
2018-10-07 15:51:04 +03:00
|
|
|
s->uncert_hostkeys[s->n_uncert_hostkeys++] = j;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
}
|
2018-10-07 15:51:04 +03:00
|
|
|
}
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
2018-10-07 15:51:04 +03:00
|
|
|
if (s->warn_kex) {
|
|
|
|
|
s->dlgret = seat_confirm_weak_crypto_primitive(
|
|
|
|
|
s->ppl.seat, "key-exchange algorithm", s->kex_alg->name,
|
|
|
|
|
ssh2_transport_dialog_callback, s);
|
|
|
|
|
crMaybeWaitUntilV(s->dlgret >= 0);
|
|
|
|
|
if (s->dlgret == 0) {
|
|
|
|
|
ssh_user_close(s->ppl.ssh, "User aborted at kex warning");
|
|
|
|
|
return;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
2018-10-07 15:51:04 +03:00
|
|
|
}
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
2018-10-07 15:51:04 +03:00
|
|
|
if (s->warn_hk) {
|
|
|
|
|
int j, k;
|
|
|
|
|
char *betteralgs;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
2018-10-07 15:51:04 +03:00
|
|
|
/*
|
|
|
|
|
* Change warning box wording depending on why we chose a
|
|
|
|
|
* warning-level host key algorithm. If it's because
|
|
|
|
|
* that's all we have *cached*, list the host keys we
|
|
|
|
|
* could usefully cross-certify. Otherwise, use the same
|
|
|
|
|
* standard wording as any other weak crypto primitive.
|
|
|
|
|
*/
|
|
|
|
|
betteralgs = NULL;
|
|
|
|
|
for (j = 0; j < s->n_uncert_hostkeys; j++) {
|
|
|
|
|
const struct ssh_signkey_with_user_pref_id *hktype =
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
&ssh2_hostkey_algs[s->uncert_hostkeys[j]];
|
2018-10-29 22:50:29 +03:00
|
|
|
int better = false;
|
2018-10-07 15:51:04 +03:00
|
|
|
for (k = 0; k < HK_MAX; k++) {
|
|
|
|
|
int id = conf_get_int_int(s->conf, CONF_ssh_hklist, k);
|
|
|
|
|
if (id == HK_WARN) {
|
|
|
|
|
break;
|
|
|
|
|
} else if (id == hktype->id) {
|
2018-10-29 22:50:29 +03:00
|
|
|
better = true;
|
2018-10-07 15:51:04 +03:00
|
|
|
break;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
2018-10-07 15:51:04 +03:00
|
|
|
}
|
|
|
|
|
if (better) {
|
|
|
|
|
if (betteralgs) {
|
|
|
|
|
char *old_ba = betteralgs;
|
|
|
|
|
betteralgs = dupcat(betteralgs, ",",
|
|
|
|
|
hktype->alg->ssh_id,
|
|
|
|
|
(const char *)NULL);
|
|
|
|
|
sfree(old_ba);
|
|
|
|
|
} else {
|
|
|
|
|
betteralgs = dupstr(hktype->alg->ssh_id);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
}
|
2018-10-07 15:51:04 +03:00
|
|
|
}
|
|
|
|
|
if (betteralgs) {
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 21:58:42 +03:00
|
|
|
/* Use the special warning prompt that lets us provide
|
|
|
|
|
* a list of better algorithms */
|
|
|
|
|
s->dlgret = seat_confirm_weak_cached_hostkey(
|
|
|
|
|
s->ppl.seat, s->hostkey_alg->ssh_id, betteralgs,
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
ssh2_transport_dialog_callback, s);
|
2018-10-07 15:51:04 +03:00
|
|
|
sfree(betteralgs);
|
|
|
|
|
} else {
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 21:58:42 +03:00
|
|
|
/* If none exist, use the more general 'weak crypto'
|
|
|
|
|
* warning prompt */
|
|
|
|
|
s->dlgret = seat_confirm_weak_crypto_primitive(
|
|
|
|
|
s->ppl.seat, "host key type", s->hostkey_alg->ssh_id,
|
|
|
|
|
ssh2_transport_dialog_callback, s);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
2018-10-07 15:51:04 +03:00
|
|
|
crMaybeWaitUntilV(s->dlgret >= 0);
|
|
|
|
|
if (s->dlgret == 0) {
|
|
|
|
|
ssh_user_close(s->ppl.ssh, "User aborted at host key warning");
|
|
|
|
|
return;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
2018-10-07 15:51:04 +03:00
|
|
|
}
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
2018-10-07 15:51:04 +03:00
|
|
|
if (s->warn_cscipher) {
|
|
|
|
|
s->dlgret = seat_confirm_weak_crypto_primitive(
|
|
|
|
|
s->ppl.seat, "client-to-server cipher", s->out.cipher->name,
|
|
|
|
|
ssh2_transport_dialog_callback, s);
|
|
|
|
|
crMaybeWaitUntilV(s->dlgret >= 0);
|
|
|
|
|
if (s->dlgret == 0) {
|
|
|
|
|
ssh_user_close(s->ppl.ssh, "User aborted at cipher warning");
|
|
|
|
|
return;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
2018-10-07 15:51:04 +03:00
|
|
|
}
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
2018-10-07 15:51:04 +03:00
|
|
|
if (s->warn_sccipher) {
|
|
|
|
|
s->dlgret = seat_confirm_weak_crypto_primitive(
|
|
|
|
|
s->ppl.seat, "server-to-client cipher", s->in.cipher->name,
|
|
|
|
|
ssh2_transport_dialog_callback, s);
|
|
|
|
|
crMaybeWaitUntilV(s->dlgret >= 0);
|
|
|
|
|
if (s->dlgret == 0) {
|
|
|
|
|
ssh_user_close(s->ppl.ssh, "User aborted at cipher warning");
|
|
|
|
|
return;
|
|
|
|
|
}
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
2018-10-07 15:51:04 +03:00
|
|
|
/*
|
|
|
|
|
* If the other side has sent an initial key exchange packet that
|
|
|
|
|
* we must treat as a wrong guess, wait for it, and discard it.
|
|
|
|
|
*/
|
|
|
|
|
if (s->ignorepkt)
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh2_transport_pop(s)) != NULL);
|
|
|
|
|
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
/*
|
|
|
|
|
* Actually perform the key exchange.
|
|
|
|
|
*/
|
|
|
|
|
s->exhash = ssh_hash_new(s->kex_alg->hash);
|
|
|
|
|
put_stringz(s->exhash, s->client_greeting);
|
|
|
|
|
put_stringz(s->exhash, s->server_greeting);
|
|
|
|
|
put_string(s->exhash, s->client_kexinit->u, s->client_kexinit->len);
|
|
|
|
|
put_string(s->exhash, s->server_kexinit->u, s->server_kexinit->len);
|
|
|
|
|
s->crStateKex = 0;
|
|
|
|
|
while (1) {
|
|
|
|
|
ssh2kex_coroutine(s);
|
|
|
|
|
if (!s->crStateKex)
|
|
|
|
|
break;
|
|
|
|
|
crReturnV;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The exchange hash from the very first key exchange is also
|
|
|
|
|
* the session id, used in session key construction and
|
|
|
|
|
* authentication.
|
|
|
|
|
*/
|
|
|
|
|
if (!s->got_session_id) {
|
|
|
|
|
assert(sizeof(s->exchange_hash) <= sizeof(s->session_id));
|
|
|
|
|
memcpy(s->session_id, s->exchange_hash, sizeof(s->exchange_hash));
|
|
|
|
|
s->session_id_len = s->kex_alg->hash->hlen;
|
|
|
|
|
assert(s->session_id_len <= sizeof(s->session_id));
|
2018-10-29 22:50:29 +03:00
|
|
|
s->got_session_id = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Send SSH2_MSG_NEWKEYS.
|
|
|
|
|
*/
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH2_MSG_NEWKEYS);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
/* Start counting down the outgoing-data limit for these cipher keys. */
|
2018-10-29 22:50:29 +03:00
|
|
|
s->stats->out.running = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
s->stats->out.remaining = s->max_data_size;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Force the BPP to synchronously marshal all packets up to and
|
|
|
|
|
* including that NEWKEYS into wire format, before we switch over
|
|
|
|
|
* to new crypto.
|
|
|
|
|
*/
|
|
|
|
|
ssh_bpp_handle_output(s->ppl.bpp);
|
|
|
|
|
|
|
|
|
|
/*
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
* We've sent outgoing NEWKEYS, so create and initialise outgoing
|
|
|
|
|
* session keys.
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
*/
|
|
|
|
|
{
|
|
|
|
|
strbuf *cipher_key = strbuf_new();
|
|
|
|
|
strbuf *cipher_iv = strbuf_new();
|
|
|
|
|
strbuf *mac_key = strbuf_new();
|
|
|
|
|
|
|
|
|
|
if (s->out.cipher) {
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
ssh2_mkkey(s, cipher_iv, s->K, s->exchange_hash,
|
|
|
|
|
'A' + s->out.mkkey_adjust, s->out.cipher->blksize);
|
|
|
|
|
ssh2_mkkey(s, cipher_key, s->K, s->exchange_hash,
|
|
|
|
|
'C' + s->out.mkkey_adjust,
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
s->out.cipher->padded_keybytes);
|
|
|
|
|
}
|
|
|
|
|
if (s->out.mac) {
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
ssh2_mkkey(s, mac_key, s->K, s->exchange_hash,
|
|
|
|
|
'E' + s->out.mkkey_adjust, s->out.mac->keylen);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ssh2_bpp_new_outgoing_crypto(
|
|
|
|
|
s->ppl.bpp,
|
|
|
|
|
s->out.cipher, cipher_key->u, cipher_iv->u,
|
|
|
|
|
s->out.mac, s->out.etm_mode, mac_key->u,
|
Support OpenSSH delayed compression without a rekey.
The problem with OpenSSH delayed compression is that the spec has a
race condition. Compression is enabled when the server sends
USERAUTH_SUCCESS. In the server->client direction, that's fine: the
USERAUTH_SUCCESS packet is not itself compressed, and the next packet
in the same direction is. But in the client->server direction, this
specification relies on there being a moment of half-duplex in the
connection: the client can't send any outgoing packet _after_ whatever
userauth packet the USERAUTH_SUCCESS was a response to, and _before_
finding out whether the response is USERAUTH_SUCCESS or something
else. If it emitted, say, an SSH_MSG_IGNORE or initiated a rekey
(perhaps due to a timeout), then that might cross in the network with
USERAUTH_SUCCESS and the server wouldn't be able to know whether to
treat it as compressed.
My previous solution was to note the presence of delayed compression
options in the server KEXINIT, but not to negotiate them in the
initial key exchange. Instead, we conduct the userauth exchange with
compression="none", and then once userauth has concluded, we trigger
an immediate rekey in which we do accept delayed compression methods -
because of course by that time they're no different from the non-
delayed versions. And that means compression is enabled by the
bidirectional NEWKEYS exchange, which lacks that race condition.
I think OpenSSH itself gets away with this because its layer structure
is structure so as to never send any such asynchronous transport-layer
message in the middle of userauth. Ours is not. But my cunning plan is
that now that my BPP abstraction includes a queue of packets to be
sent and a callback that processes that queue on to the output raw
data bufchain, it's possible to make that callback terminate early, to
leave any dangerous transport-layer messages unsent while we wait for
a userauth response.
Specifically: if we've negotiated a delayed compression method and not
yet seen USERAUTH_SUCCESS, then ssh2_bpp_handle_output will emit all
packets from its queue up to and including the last one in the
userauth type-code range, and keep back any further ones. The idea is
that _if_ that last userauth message was one that might provoke
USERAUTH_SUCCESS, we don't want to send any difficult things after it;
if it's not (e.g. it's in the middle of some ongoing userauth process
like k-i or GSS) then the userauth layer will know that, and will emit
some further userauth packet on its own initiative which will clue us
in that it's OK to release everything up to and including that one.
(So in particular it wasn't even necessary to forbid _all_ transport-
layer packets during userauth. I could have done that by reordering
the output queue - packets in that queue haven't been assigned their
sequence numbers yet, so that would have been safe - but it's more
elegant not to have to.)
One particular case we do have to be careful about is not trying to
initiate a _rekey_ during userauth, if delayed compression is in the
offing. That's because when we start rekeying, ssh2transport stops
sending any higher-layer packets at all, to discourage servers from
trying to ignore the KEXINIT and press on regardless - you don't get
your higher-layer replies until you actually respond to the
lower-layer interrupt. But in this case, if ssh2transport sent a
KEXINIT, which ssh2bpp kept back in the queue to avoid a delayed
compression race and would only send if another userauth packet
followed it, which ssh2transport would never pass on to ssh2bpp's
output queue, there'd be a complete protocol deadlock. So instead I
defer any attempt to start a rekey until after userauth finishes
(using the existing system for starting a deferred rekey at that
moment, which was previously used for the _old_ delayed-compression
strategy, and still has to be here anyway for GSSAPI purposes).
2018-10-07 11:10:14 +03:00
|
|
|
s->out.comp, s->out.comp_delayed);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
strbuf_free(cipher_key);
|
|
|
|
|
strbuf_free(cipher_iv);
|
|
|
|
|
strbuf_free(mac_key);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Now our end of the key exchange is complete, we can send all
|
|
|
|
|
* our queued higher-layer packets. Transfer the whole of the next
|
|
|
|
|
* layer's outgoing queue on to our own.
|
|
|
|
|
*/
|
|
|
|
|
pq_concatenate(s->ppl.out_pq, s->ppl.out_pq, &s->pq_out_higher);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Expect SSH2_MSG_NEWKEYS from server.
|
|
|
|
|
*/
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh2_transport_pop(s)) != NULL);
|
|
|
|
|
if (pktin->type != SSH2_MSG_NEWKEYS) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Received unexpected packet when "
|
|
|
|
|
"expecting SSH_MSG_NEWKEYS, type %d (%s)",
|
|
|
|
|
pktin->type,
|
|
|
|
|
ssh2_pkt_type(s->ppl.bpp->pls->kctx,
|
|
|
|
|
s->ppl.bpp->pls->actx,
|
|
|
|
|
pktin->type));
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
/* Start counting down the incoming-data limit for these cipher keys. */
|
2018-10-29 22:50:29 +03:00
|
|
|
s->stats->in.running = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
s->stats->in.remaining = s->max_data_size;
|
|
|
|
|
|
|
|
|
|
/*
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
* We've seen incoming NEWKEYS, so create and initialise
|
|
|
|
|
* incoming session keys.
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
*/
|
|
|
|
|
{
|
|
|
|
|
strbuf *cipher_key = strbuf_new();
|
|
|
|
|
strbuf *cipher_iv = strbuf_new();
|
|
|
|
|
strbuf *mac_key = strbuf_new();
|
|
|
|
|
|
|
|
|
|
if (s->in.cipher) {
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
ssh2_mkkey(s, cipher_iv, s->K, s->exchange_hash,
|
|
|
|
|
'A' + s->in.mkkey_adjust, s->in.cipher->blksize);
|
|
|
|
|
ssh2_mkkey(s, cipher_key, s->K, s->exchange_hash,
|
|
|
|
|
'C' + s->in.mkkey_adjust,
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
s->in.cipher->padded_keybytes);
|
|
|
|
|
}
|
|
|
|
|
if (s->in.mac) {
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
ssh2_mkkey(s, mac_key, s->K, s->exchange_hash,
|
|
|
|
|
'E' + s->in.mkkey_adjust, s->in.mac->keylen);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ssh2_bpp_new_incoming_crypto(
|
|
|
|
|
s->ppl.bpp,
|
|
|
|
|
s->in.cipher, cipher_key->u, cipher_iv->u,
|
|
|
|
|
s->in.mac, s->in.etm_mode, mac_key->u,
|
Support OpenSSH delayed compression without a rekey.
The problem with OpenSSH delayed compression is that the spec has a
race condition. Compression is enabled when the server sends
USERAUTH_SUCCESS. In the server->client direction, that's fine: the
USERAUTH_SUCCESS packet is not itself compressed, and the next packet
in the same direction is. But in the client->server direction, this
specification relies on there being a moment of half-duplex in the
connection: the client can't send any outgoing packet _after_ whatever
userauth packet the USERAUTH_SUCCESS was a response to, and _before_
finding out whether the response is USERAUTH_SUCCESS or something
else. If it emitted, say, an SSH_MSG_IGNORE or initiated a rekey
(perhaps due to a timeout), then that might cross in the network with
USERAUTH_SUCCESS and the server wouldn't be able to know whether to
treat it as compressed.
My previous solution was to note the presence of delayed compression
options in the server KEXINIT, but not to negotiate them in the
initial key exchange. Instead, we conduct the userauth exchange with
compression="none", and then once userauth has concluded, we trigger
an immediate rekey in which we do accept delayed compression methods -
because of course by that time they're no different from the non-
delayed versions. And that means compression is enabled by the
bidirectional NEWKEYS exchange, which lacks that race condition.
I think OpenSSH itself gets away with this because its layer structure
is structure so as to never send any such asynchronous transport-layer
message in the middle of userauth. Ours is not. But my cunning plan is
that now that my BPP abstraction includes a queue of packets to be
sent and a callback that processes that queue on to the output raw
data bufchain, it's possible to make that callback terminate early, to
leave any dangerous transport-layer messages unsent while we wait for
a userauth response.
Specifically: if we've negotiated a delayed compression method and not
yet seen USERAUTH_SUCCESS, then ssh2_bpp_handle_output will emit all
packets from its queue up to and including the last one in the
userauth type-code range, and keep back any further ones. The idea is
that _if_ that last userauth message was one that might provoke
USERAUTH_SUCCESS, we don't want to send any difficult things after it;
if it's not (e.g. it's in the middle of some ongoing userauth process
like k-i or GSS) then the userauth layer will know that, and will emit
some further userauth packet on its own initiative which will clue us
in that it's OK to release everything up to and including that one.
(So in particular it wasn't even necessary to forbid _all_ transport-
layer packets during userauth. I could have done that by reordering
the output queue - packets in that queue haven't been assigned their
sequence numbers yet, so that would have been safe - but it's more
elegant not to have to.)
One particular case we do have to be careful about is not trying to
initiate a _rekey_ during userauth, if delayed compression is in the
offing. That's because when we start rekeying, ssh2transport stops
sending any higher-layer packets at all, to discourage servers from
trying to ignore the KEXINIT and press on regardless - you don't get
your higher-layer replies until you actually respond to the
lower-layer interrupt. But in this case, if ssh2transport sent a
KEXINIT, which ssh2bpp kept back in the queue to avoid a delayed
compression race and would only send if another userauth packet
followed it, which ssh2transport would never pass on to ssh2bpp's
output queue, there'd be a complete protocol deadlock. So instead I
defer any attempt to start a rekey until after userauth finishes
(using the existing system for starting a deferred rekey at that
moment, which was previously used for the _old_ delayed-compression
strategy, and still has to be here anyway for GSSAPI purposes).
2018-10-07 11:10:14 +03:00
|
|
|
s->in.comp, s->in.comp_delayed);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
strbuf_free(cipher_key);
|
|
|
|
|
strbuf_free(cipher_iv);
|
|
|
|
|
strbuf_free(mac_key);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Free shared secret.
|
|
|
|
|
*/
|
|
|
|
|
freebn(s->K); s->K = NULL;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Update the specials menu to list the remaining uncertified host
|
|
|
|
|
* keys.
|
|
|
|
|
*/
|
New abstraction 'Seat', to pass to backends.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
2018-10-11 21:58:42 +03:00
|
|
|
seat_update_specials_menu(s->ppl.seat);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Key exchange is over. Loop straight back round if we have a
|
|
|
|
|
* deferred rekey reason.
|
|
|
|
|
*/
|
|
|
|
|
if (s->deferred_rekey_reason) {
|
|
|
|
|
ppl_logevent(("%s", s->deferred_rekey_reason));
|
|
|
|
|
pktin = NULL;
|
|
|
|
|
s->deferred_rekey_reason = NULL;
|
|
|
|
|
goto begin_key_exchange;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Otherwise, schedule a timer for our next rekey.
|
|
|
|
|
*/
|
2018-10-29 22:50:29 +03:00
|
|
|
s->kex_in_progress = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
s->last_rekey = GETTICKCOUNT();
|
|
|
|
|
(void) ssh2_transport_timer_update(s, 0);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Now we're encrypting. Get the next-layer protocol started if it
|
|
|
|
|
* hasn't already, and then sit here waiting for reasons to go
|
|
|
|
|
* back to the start and do a repeat key exchange. One of those
|
|
|
|
|
* reasons is that we receive KEXINIT from the other end; the
|
|
|
|
|
* other is if we find rekey_reason is non-NULL, i.e. we've
|
|
|
|
|
* decided to initiate a rekey ourselves for some reason.
|
|
|
|
|
*/
|
|
|
|
|
if (!s->higher_layer_ok) {
|
Add an actual SSH server program.
This server is NOT SECURE! If anyone is reading this commit message,
DO NOT DEPLOY IT IN A HOSTILE-FACING ENVIRONMENT! Its purpose is to
speak the server end of everything PuTTY speaks on the client side, so
that I can test that I haven't broken PuTTY when I reorganise its
code, even things like RSA key exchange or chained auth methods which
it's hard to find a server that speaks at all.
(For this reason, it's declared with [UT] in the Recipe file, so that
it falls into the same category as programs like testbn, which won't
be installed by 'make install'.)
Working title is 'Uppity', partly for 'Universal PuTTY Protocol
Interaction Test Yoke', but mostly because it looks quite like the
word 'PuTTY' with part of it reversed. (Apparently 'test yoke' is a
very rarely used term meaning something not altogether unlike 'test
harness', which is a bit of a stretch, but it'll do.)
It doesn't actually _support_ everything I want yet. At the moment,
it's a proof of concept only. But it has most of the machinery
present, and the parts it's missing - such as chained auth methods -
should be easy enough to add because I've built in the required
flexibility, in the form of an AuthPolicy object which can request
them if it wants to. However, the current AuthPolicy object is
entirely trivial, and will let in any user with the password "weasel".
(Another way in which this is not a production-ready server is that it
also has no interaction with the OS's authentication system. In
particular, it will not only let in any user with the same password,
but it won't even change uid - it will open shells and forwardings
under whatever user id you started it up as.)
Currently, the program can only speak the SSH protocol on its standard
I/O channels (using the new FdSocket facility), so if you want it to
listen on a network port, you'll have to run it from some kind of
separate listening program similar to inetd. For my own tests, I'm not
even doing that: I'm just having PuTTY spawn it as a local proxy
process, which also conveniently eliminates the risk of anyone hostile
connecting to it.
The bulk of the actual code reorganisation is already done by previous
commits, so this change is _mostly_ just dropping in a new set of
server-specific source files alongside the client-specific ones I
created recently. The remaining changes in the shared SSH code are
numerous, but all minor:
- a few extra parameters to BPP and PPL constructors (e.g. 'are you
in server mode?'), and pass both sets of SSH-1 protocol flags from
the login to the connection layer
- in server mode, unconditionally send our version string _before_
waiting for the remote one
- a new hook in the SSH-1 BPP to handle enabling compression in
server mode, where the message exchange works the other way round
- new code in the SSH-2 BPP to do _deferred_ compression the other
way round (the non-deferred version is still nicely symmetric)
- in the SSH-2 transport layer, some adjustments to do key derivation
either way round (swapping round the identifying letters in the
various hash preimages, and making sure to list the KEXINITs in the
right order)
- also in the SSH-2 transport layer, an if statement that controls
whether we send SERVICE_REQUEST and wait for SERVICE_ACCEPT, or
vice versa
- new ConnectionLayer methods for opening outgoing channels for X and
agent forwardings
- new functions in portfwd.c to establish listening sockets suitable
for remote-to-local port forwarding (i.e. not under the direction
of a Conf the way it's done on the client side).
2018-10-21 00:09:54 +03:00
|
|
|
if (!s->hostkeys) {
|
|
|
|
|
/* We're the client, so send SERVICE_REQUEST. */
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH2_MSG_SERVICE_REQUEST);
|
|
|
|
|
put_stringz(pktout, s->higher_layer->vt->name);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh2_transport_pop(s)) != NULL);
|
|
|
|
|
if (pktin->type != SSH2_MSG_SERVICE_ACCEPT) {
|
|
|
|
|
ssh_sw_abort(s->ppl.ssh, "Server refused request to start "
|
|
|
|
|
"'%s' protocol", s->higher_layer->vt->name);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
ptrlen service_name;
|
|
|
|
|
|
|
|
|
|
/* We're the server, so expect SERVICE_REQUEST. */
|
|
|
|
|
crMaybeWaitUntilV((pktin = ssh2_transport_pop(s)) != NULL);
|
|
|
|
|
if (pktin->type != SSH2_MSG_SERVICE_REQUEST) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Received unexpected packet when "
|
|
|
|
|
"expecting SERVICE_REQUEST, type %d (%s)",
|
|
|
|
|
pktin->type,
|
|
|
|
|
ssh2_pkt_type(s->ppl.bpp->pls->kctx,
|
|
|
|
|
s->ppl.bpp->pls->actx,
|
|
|
|
|
pktin->type));
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
service_name = get_string(pktin);
|
|
|
|
|
if (!ptrlen_eq_string(service_name, s->higher_layer->vt->name)) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Client requested service "
|
|
|
|
|
"'%.*s' when we only support '%s'",
|
|
|
|
|
PTRLEN_PRINTF(service_name),
|
|
|
|
|
s->higher_layer->vt->name);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
pktout = ssh_bpp_new_pktout(s->ppl.bpp, SSH2_MSG_SERVICE_ACCEPT);
|
|
|
|
|
put_stringz(pktout, s->higher_layer->vt->name);
|
|
|
|
|
pq_push(s->ppl.out_pq, pktout);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
2018-10-29 22:50:29 +03:00
|
|
|
s->higher_layer_ok = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
queue_idempotent_callback(&s->higher_layer->ic_process_queue);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
s->rekey_class = RK_NONE;
|
|
|
|
|
do {
|
|
|
|
|
crReturnV;
|
|
|
|
|
|
|
|
|
|
/* Pass through outgoing packets from the higher layer. */
|
|
|
|
|
pq_concatenate(s->ppl.out_pq, s->ppl.out_pq, &s->pq_out_higher);
|
|
|
|
|
|
|
|
|
|
/* Wait for either a KEXINIT, or something setting
|
|
|
|
|
* s->rekey_class. This call to ssh2_transport_pop also has
|
|
|
|
|
* the side effect of transferring incoming packets _to_ the
|
|
|
|
|
* higher layer (via filter_queue). */
|
|
|
|
|
if ((pktin = ssh2_transport_pop(s)) != NULL) {
|
|
|
|
|
if (pktin->type != SSH2_MSG_KEXINIT) {
|
|
|
|
|
ssh_proto_error(s->ppl.ssh, "Received unexpected transport-"
|
|
|
|
|
"layer packet outside a key exchange, "
|
|
|
|
|
"type %d (%s)", pktin->type,
|
|
|
|
|
ssh2_pkt_type(s->ppl.bpp->pls->kctx,
|
|
|
|
|
s->ppl.bpp->pls->actx,
|
|
|
|
|
pktin->type));
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
pq_push_front(s->ppl.in_pq, pktin);
|
2018-10-20 23:52:45 +03:00
|
|
|
ppl_logevent(("Remote side initiated key re-exchange"));
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
s->rekey_class = RK_SERVER;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (s->rekey_class == RK_POST_USERAUTH) {
|
|
|
|
|
/*
|
Support OpenSSH delayed compression without a rekey.
The problem with OpenSSH delayed compression is that the spec has a
race condition. Compression is enabled when the server sends
USERAUTH_SUCCESS. In the server->client direction, that's fine: the
USERAUTH_SUCCESS packet is not itself compressed, and the next packet
in the same direction is. But in the client->server direction, this
specification relies on there being a moment of half-duplex in the
connection: the client can't send any outgoing packet _after_ whatever
userauth packet the USERAUTH_SUCCESS was a response to, and _before_
finding out whether the response is USERAUTH_SUCCESS or something
else. If it emitted, say, an SSH_MSG_IGNORE or initiated a rekey
(perhaps due to a timeout), then that might cross in the network with
USERAUTH_SUCCESS and the server wouldn't be able to know whether to
treat it as compressed.
My previous solution was to note the presence of delayed compression
options in the server KEXINIT, but not to negotiate them in the
initial key exchange. Instead, we conduct the userauth exchange with
compression="none", and then once userauth has concluded, we trigger
an immediate rekey in which we do accept delayed compression methods -
because of course by that time they're no different from the non-
delayed versions. And that means compression is enabled by the
bidirectional NEWKEYS exchange, which lacks that race condition.
I think OpenSSH itself gets away with this because its layer structure
is structure so as to never send any such asynchronous transport-layer
message in the middle of userauth. Ours is not. But my cunning plan is
that now that my BPP abstraction includes a queue of packets to be
sent and a callback that processes that queue on to the output raw
data bufchain, it's possible to make that callback terminate early, to
leave any dangerous transport-layer messages unsent while we wait for
a userauth response.
Specifically: if we've negotiated a delayed compression method and not
yet seen USERAUTH_SUCCESS, then ssh2_bpp_handle_output will emit all
packets from its queue up to and including the last one in the
userauth type-code range, and keep back any further ones. The idea is
that _if_ that last userauth message was one that might provoke
USERAUTH_SUCCESS, we don't want to send any difficult things after it;
if it's not (e.g. it's in the middle of some ongoing userauth process
like k-i or GSS) then the userauth layer will know that, and will emit
some further userauth packet on its own initiative which will clue us
in that it's OK to release everything up to and including that one.
(So in particular it wasn't even necessary to forbid _all_ transport-
layer packets during userauth. I could have done that by reordering
the output queue - packets in that queue haven't been assigned their
sequence numbers yet, so that would have been safe - but it's more
elegant not to have to.)
One particular case we do have to be careful about is not trying to
initiate a _rekey_ during userauth, if delayed compression is in the
offing. That's because when we start rekeying, ssh2transport stops
sending any higher-layer packets at all, to discourage servers from
trying to ignore the KEXINIT and press on regardless - you don't get
your higher-layer replies until you actually respond to the
lower-layer interrupt. But in this case, if ssh2transport sent a
KEXINIT, which ssh2bpp kept back in the queue to avoid a delayed
compression race and would only send if another userauth packet
followed it, which ssh2transport would never pass on to ssh2bpp's
output queue, there'd be a complete protocol deadlock. So instead I
defer any attempt to start a rekey until after userauth finishes
(using the existing system for starting a deferred rekey at that
moment, which was previously used for the _old_ delayed-compression
strategy, and still has to be here anyway for GSSAPI purposes).
2018-10-07 11:10:14 +03:00
|
|
|
* userauth has seen a USERAUTH_SUCCESS. This may be the
|
|
|
|
|
* moment to do an immediate rekey with different
|
|
|
|
|
* parameters. But it may not; so here we turn that rekey
|
|
|
|
|
* class into either RK_NONE or RK_NORMAL.
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
*
|
Support OpenSSH delayed compression without a rekey.
The problem with OpenSSH delayed compression is that the spec has a
race condition. Compression is enabled when the server sends
USERAUTH_SUCCESS. In the server->client direction, that's fine: the
USERAUTH_SUCCESS packet is not itself compressed, and the next packet
in the same direction is. But in the client->server direction, this
specification relies on there being a moment of half-duplex in the
connection: the client can't send any outgoing packet _after_ whatever
userauth packet the USERAUTH_SUCCESS was a response to, and _before_
finding out whether the response is USERAUTH_SUCCESS or something
else. If it emitted, say, an SSH_MSG_IGNORE or initiated a rekey
(perhaps due to a timeout), then that might cross in the network with
USERAUTH_SUCCESS and the server wouldn't be able to know whether to
treat it as compressed.
My previous solution was to note the presence of delayed compression
options in the server KEXINIT, but not to negotiate them in the
initial key exchange. Instead, we conduct the userauth exchange with
compression="none", and then once userauth has concluded, we trigger
an immediate rekey in which we do accept delayed compression methods -
because of course by that time they're no different from the non-
delayed versions. And that means compression is enabled by the
bidirectional NEWKEYS exchange, which lacks that race condition.
I think OpenSSH itself gets away with this because its layer structure
is structure so as to never send any such asynchronous transport-layer
message in the middle of userauth. Ours is not. But my cunning plan is
that now that my BPP abstraction includes a queue of packets to be
sent and a callback that processes that queue on to the output raw
data bufchain, it's possible to make that callback terminate early, to
leave any dangerous transport-layer messages unsent while we wait for
a userauth response.
Specifically: if we've negotiated a delayed compression method and not
yet seen USERAUTH_SUCCESS, then ssh2_bpp_handle_output will emit all
packets from its queue up to and including the last one in the
userauth type-code range, and keep back any further ones. The idea is
that _if_ that last userauth message was one that might provoke
USERAUTH_SUCCESS, we don't want to send any difficult things after it;
if it's not (e.g. it's in the middle of some ongoing userauth process
like k-i or GSS) then the userauth layer will know that, and will emit
some further userauth packet on its own initiative which will clue us
in that it's OK to release everything up to and including that one.
(So in particular it wasn't even necessary to forbid _all_ transport-
layer packets during userauth. I could have done that by reordering
the output queue - packets in that queue haven't been assigned their
sequence numbers yet, so that would have been safe - but it's more
elegant not to have to.)
One particular case we do have to be careful about is not trying to
initiate a _rekey_ during userauth, if delayed compression is in the
offing. That's because when we start rekeying, ssh2transport stops
sending any higher-layer packets at all, to discourage servers from
trying to ignore the KEXINIT and press on regardless - you don't get
your higher-layer replies until you actually respond to the
lower-layer interrupt. But in this case, if ssh2transport sent a
KEXINIT, which ssh2bpp kept back in the queue to avoid a delayed
compression race and would only send if another userauth packet
followed it, which ssh2transport would never pass on to ssh2bpp's
output queue, there'd be a complete protocol deadlock. So instead I
defer any attempt to start a rekey until after userauth finishes
(using the existing system for starting a deferred rekey at that
moment, which was previously used for the _old_ delayed-compression
strategy, and still has to be here anyway for GSSAPI purposes).
2018-10-07 11:10:14 +03:00
|
|
|
* Currently the only reason for this is if we've done a
|
|
|
|
|
* GSS key exchange and don't have anything in our
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
* transient hostkey cache, in which case we should make
|
|
|
|
|
* an attempt to populate the cache now.
|
|
|
|
|
*/
|
Support OpenSSH delayed compression without a rekey.
The problem with OpenSSH delayed compression is that the spec has a
race condition. Compression is enabled when the server sends
USERAUTH_SUCCESS. In the server->client direction, that's fine: the
USERAUTH_SUCCESS packet is not itself compressed, and the next packet
in the same direction is. But in the client->server direction, this
specification relies on there being a moment of half-duplex in the
connection: the client can't send any outgoing packet _after_ whatever
userauth packet the USERAUTH_SUCCESS was a response to, and _before_
finding out whether the response is USERAUTH_SUCCESS or something
else. If it emitted, say, an SSH_MSG_IGNORE or initiated a rekey
(perhaps due to a timeout), then that might cross in the network with
USERAUTH_SUCCESS and the server wouldn't be able to know whether to
treat it as compressed.
My previous solution was to note the presence of delayed compression
options in the server KEXINIT, but not to negotiate them in the
initial key exchange. Instead, we conduct the userauth exchange with
compression="none", and then once userauth has concluded, we trigger
an immediate rekey in which we do accept delayed compression methods -
because of course by that time they're no different from the non-
delayed versions. And that means compression is enabled by the
bidirectional NEWKEYS exchange, which lacks that race condition.
I think OpenSSH itself gets away with this because its layer structure
is structure so as to never send any such asynchronous transport-layer
message in the middle of userauth. Ours is not. But my cunning plan is
that now that my BPP abstraction includes a queue of packets to be
sent and a callback that processes that queue on to the output raw
data bufchain, it's possible to make that callback terminate early, to
leave any dangerous transport-layer messages unsent while we wait for
a userauth response.
Specifically: if we've negotiated a delayed compression method and not
yet seen USERAUTH_SUCCESS, then ssh2_bpp_handle_output will emit all
packets from its queue up to and including the last one in the
userauth type-code range, and keep back any further ones. The idea is
that _if_ that last userauth message was one that might provoke
USERAUTH_SUCCESS, we don't want to send any difficult things after it;
if it's not (e.g. it's in the middle of some ongoing userauth process
like k-i or GSS) then the userauth layer will know that, and will emit
some further userauth packet on its own initiative which will clue us
in that it's OK to release everything up to and including that one.
(So in particular it wasn't even necessary to forbid _all_ transport-
layer packets during userauth. I could have done that by reordering
the output queue - packets in that queue haven't been assigned their
sequence numbers yet, so that would have been safe - but it's more
elegant not to have to.)
One particular case we do have to be careful about is not trying to
initiate a _rekey_ during userauth, if delayed compression is in the
offing. That's because when we start rekeying, ssh2transport stops
sending any higher-layer packets at all, to discourage servers from
trying to ignore the KEXINIT and press on regardless - you don't get
your higher-layer replies until you actually respond to the
lower-layer interrupt. But in this case, if ssh2transport sent a
KEXINIT, which ssh2bpp kept back in the queue to avoid a delayed
compression race and would only send if another userauth packet
followed it, which ssh2transport would never pass on to ssh2bpp's
output queue, there'd be a complete protocol deadlock. So instead I
defer any attempt to start a rekey until after userauth finishes
(using the existing system for starting a deferred rekey at that
moment, which was previously used for the _old_ delayed-compression
strategy, and still has to be here anyway for GSSAPI purposes).
2018-10-07 11:10:14 +03:00
|
|
|
if (s->need_gss_transient_hostkey) {
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
s->rekey_reason = "populating transient host key cache";
|
|
|
|
|
s->rekey_class = RK_NORMAL;
|
|
|
|
|
} else {
|
|
|
|
|
/* No need to rekey at this time. */
|
|
|
|
|
s->rekey_class = RK_NONE;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (!s->rekey_class) {
|
|
|
|
|
/* If we don't yet have any other reason to rekey, check
|
|
|
|
|
* if we've hit our data limit in either direction. */
|
|
|
|
|
if (!s->stats->in.running) {
|
|
|
|
|
s->rekey_reason = "too much data received";
|
|
|
|
|
s->rekey_class = RK_NORMAL;
|
|
|
|
|
} else if (!s->stats->out.running) {
|
|
|
|
|
s->rekey_reason = "too much data sent";
|
|
|
|
|
s->rekey_class = RK_NORMAL;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (s->rekey_class != RK_NONE && s->rekey_class != RK_SERVER) {
|
|
|
|
|
/*
|
|
|
|
|
* Special case: if the server bug is set that doesn't
|
|
|
|
|
* allow rekeying, we give a different log message and
|
|
|
|
|
* continue waiting. (If such a server _initiates_ a
|
|
|
|
|
* rekey, we process it anyway!)
|
|
|
|
|
*/
|
|
|
|
|
if ((s->ppl.remote_bugs & BUG_SSH2_REKEY)) {
|
2018-10-20 23:52:45 +03:00
|
|
|
ppl_logevent(("Remote bug prevents key re-exchange (%s)",
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
s->rekey_reason));
|
|
|
|
|
/* Reset the counters, so that at least this message doesn't
|
|
|
|
|
* hit the event log _too_ often. */
|
2018-10-29 22:50:29 +03:00
|
|
|
s->stats->in.running = s->stats->out.running = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
s->stats->in.remaining = s->stats->out.remaining =
|
|
|
|
|
s->max_data_size;
|
|
|
|
|
(void) ssh2_transport_timer_update(s, 0);
|
|
|
|
|
s->rekey_class = RK_NONE;
|
|
|
|
|
} else {
|
|
|
|
|
ppl_logevent(("Initiating key re-exchange (%s)",
|
|
|
|
|
s->rekey_reason));
|
|
|
|
|
}
|
|
|
|
|
}
|
2018-09-25 19:12:22 +03:00
|
|
|
} while (s->rekey_class == RK_NONE);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
/* Once we exit the above loop, we really are rekeying. */
|
|
|
|
|
goto begin_key_exchange;
|
|
|
|
|
|
|
|
|
|
crFinishV;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh2_transport_higher_layer_packet_callback(void *context)
|
|
|
|
|
{
|
|
|
|
|
PacketProtocolLayer *ppl = (PacketProtocolLayer *)context;
|
|
|
|
|
ssh_ppl_process_queue(ppl);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh2_transport_timer(void *ctx, unsigned long now)
|
|
|
|
|
{
|
|
|
|
|
struct ssh2_transport_state *s = (struct ssh2_transport_state *)ctx;
|
|
|
|
|
unsigned long mins;
|
|
|
|
|
unsigned long ticks;
|
|
|
|
|
|
|
|
|
|
if (s->kex_in_progress || now != s->next_rekey)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
mins = sanitise_rekey_time(conf_get_int(s->conf, CONF_ssh_rekey_time), 60);
|
|
|
|
|
if (mins == 0)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
/* Rekey if enough time has elapsed */
|
|
|
|
|
ticks = mins * 60 * TICKSPERSEC;
|
|
|
|
|
if (now - s->last_rekey > ticks - 30*TICKSPERSEC) {
|
|
|
|
|
s->rekey_reason = "timeout";
|
|
|
|
|
s->rekey_class = RK_NORMAL;
|
|
|
|
|
queue_idempotent_callback(&s->ppl.ic_process_queue);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#ifndef NO_GSSAPI
|
|
|
|
|
/*
|
|
|
|
|
* Rekey now if we have a new cred or context expires this cycle,
|
|
|
|
|
* but not if this is unsafe.
|
|
|
|
|
*/
|
|
|
|
|
if (conf_get_int(s->conf, CONF_gssapirekey)) {
|
2018-10-29 22:50:29 +03:00
|
|
|
ssh2_transport_gss_update(s, false);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
if ((s->gss_status & GSS_KEX_CAPABLE) != 0 &&
|
|
|
|
|
(s->gss_status & GSS_CTXT_MAYFAIL) == 0 &&
|
|
|
|
|
(s->gss_status & (GSS_CRED_UPDATED|GSS_CTXT_EXPIRES)) != 0) {
|
|
|
|
|
s->rekey_reason = "GSS credentials updated";
|
|
|
|
|
s->rekey_class = RK_GSS_UPDATE;
|
|
|
|
|
queue_idempotent_callback(&s->ppl.ic_process_queue);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* Try again later. */
|
|
|
|
|
(void) ssh2_transport_timer_update(s, 0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The rekey_time is zero except when re-configuring.
|
|
|
|
|
*
|
|
|
|
|
* We either schedule the next timer and return 0, or return 1 to run the
|
|
|
|
|
* callback now, which will call us again to re-schedule on completion.
|
|
|
|
|
*/
|
|
|
|
|
static int ssh2_transport_timer_update(struct ssh2_transport_state *s,
|
|
|
|
|
unsigned long rekey_time)
|
|
|
|
|
{
|
|
|
|
|
unsigned long mins;
|
|
|
|
|
unsigned long ticks;
|
|
|
|
|
|
|
|
|
|
mins = sanitise_rekey_time(conf_get_int(s->conf, CONF_ssh_rekey_time), 60);
|
|
|
|
|
ticks = mins * 60 * TICKSPERSEC;
|
|
|
|
|
|
|
|
|
|
/* Handle change from previous setting */
|
|
|
|
|
if (rekey_time != 0 && rekey_time != mins) {
|
|
|
|
|
unsigned long next;
|
|
|
|
|
unsigned long now = GETTICKCOUNT();
|
|
|
|
|
|
|
|
|
|
mins = rekey_time;
|
|
|
|
|
ticks = mins * 60 * TICKSPERSEC;
|
|
|
|
|
next = s->last_rekey + ticks;
|
|
|
|
|
|
|
|
|
|
/* If overdue, caller will rekey synchronously now */
|
|
|
|
|
if (now - s->last_rekey > ticks)
|
|
|
|
|
return 1;
|
|
|
|
|
ticks = next - now;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#ifndef NO_GSSAPI
|
|
|
|
|
if (s->gss_kex_used) {
|
|
|
|
|
/*
|
|
|
|
|
* If we've used GSSAPI key exchange, then we should
|
|
|
|
|
* periodically check whether we need to do another one to
|
|
|
|
|
* pass new credentials to the server.
|
|
|
|
|
*/
|
|
|
|
|
unsigned long gssmins;
|
|
|
|
|
|
|
|
|
|
/* Check cascade conditions more frequently if configured */
|
|
|
|
|
gssmins = sanitise_rekey_time(
|
|
|
|
|
conf_get_int(s->conf, CONF_gssapirekey), GSS_DEF_REKEY_MINS);
|
|
|
|
|
if (gssmins > 0) {
|
|
|
|
|
if (gssmins < mins)
|
|
|
|
|
ticks = (mins = gssmins) * 60 * TICKSPERSEC;
|
|
|
|
|
|
|
|
|
|
if ((s->gss_status & GSS_KEX_CAPABLE) != 0) {
|
|
|
|
|
/*
|
|
|
|
|
* Run next timer even sooner if it would otherwise be
|
|
|
|
|
* too close to the context expiration time
|
|
|
|
|
*/
|
|
|
|
|
if ((s->gss_status & GSS_CTXT_EXPIRES) == 0 &&
|
|
|
|
|
s->gss_ctxt_lifetime - mins * 60 < 2 * MIN_CTXT_LIFETIME)
|
|
|
|
|
ticks -= 2 * MIN_CTXT_LIFETIME * TICKSPERSEC;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/* Schedule the next timer */
|
|
|
|
|
s->next_rekey = schedule_timer(ticks, ssh2_transport_timer, s);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
void ssh2_transport_dialog_callback(void *loginv, int ret)
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
{
|
|
|
|
|
struct ssh2_transport_state *s = (struct ssh2_transport_state *)loginv;
|
|
|
|
|
s->dlgret = ret;
|
|
|
|
|
ssh_ppl_process_queue(&s->ppl);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#ifndef NO_GSSAPI
|
|
|
|
|
/*
|
|
|
|
|
* This is called at the beginning of each SSH rekey to determine
|
|
|
|
|
* whether we are GSS capable, and if we did GSS key exchange, and are
|
|
|
|
|
* delegating credentials, it is also called periodically to determine
|
|
|
|
|
* whether we should rekey in order to delegate (more) fresh
|
|
|
|
|
* credentials. This is called "credential cascading".
|
|
|
|
|
*
|
|
|
|
|
* On Windows, with SSPI, we may not get the credential expiration, as
|
|
|
|
|
* Windows automatically renews from cached passwords, so the
|
|
|
|
|
* credential effectively never expires. Since we still want to
|
|
|
|
|
* cascade when the local TGT is updated, we use the expiration of a
|
|
|
|
|
* newly obtained context as a proxy for the expiration of the TGT.
|
|
|
|
|
*/
|
|
|
|
|
static void ssh2_transport_gss_update(struct ssh2_transport_state *s,
|
|
|
|
|
int definitely_rekeying)
|
|
|
|
|
{
|
|
|
|
|
PacketProtocolLayer *ppl = &s->ppl; /* for ppl_logevent */
|
|
|
|
|
int gss_stat;
|
|
|
|
|
time_t gss_cred_expiry;
|
|
|
|
|
unsigned long mins;
|
|
|
|
|
Ssh_gss_buf gss_sndtok;
|
|
|
|
|
Ssh_gss_buf gss_rcvtok;
|
|
|
|
|
Ssh_gss_ctx gss_ctx;
|
|
|
|
|
|
|
|
|
|
s->gss_status = 0;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Nothing to do if no GSSAPI libraries are configured or GSSAPI
|
|
|
|
|
* auth is not enabled.
|
|
|
|
|
*/
|
|
|
|
|
if (s->shgss->libs->nlibraries == 0)
|
|
|
|
|
return;
|
|
|
|
|
if (!conf_get_int(s->conf, CONF_try_gssapi_auth) &&
|
|
|
|
|
!conf_get_int(s->conf, CONF_try_gssapi_kex))
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
/* Import server name and cache it */
|
|
|
|
|
if (s->shgss->srv_name == GSS_C_NO_NAME) {
|
|
|
|
|
gss_stat = s->shgss->lib->import_name(
|
|
|
|
|
s->shgss->lib, s->fullhostname, &s->shgss->srv_name);
|
|
|
|
|
if (gss_stat != SSH_GSS_OK) {
|
|
|
|
|
if (gss_stat == SSH_GSS_BAD_HOST_NAME)
|
|
|
|
|
ppl_logevent(("GSSAPI import name failed - Bad service name;"
|
|
|
|
|
" won't use GSS key exchange"));
|
|
|
|
|
else
|
|
|
|
|
ppl_logevent(("GSSAPI import name failed;"
|
|
|
|
|
" won't use GSS key exchange"));
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Do we (still) have credentials? Capture the credential
|
|
|
|
|
* expiration when available
|
|
|
|
|
*/
|
|
|
|
|
gss_stat = s->shgss->lib->acquire_cred(
|
|
|
|
|
s->shgss->lib, &gss_ctx, &gss_cred_expiry);
|
|
|
|
|
if (gss_stat != SSH_GSS_OK)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
SSH_GSS_CLEAR_BUF(&gss_sndtok);
|
|
|
|
|
SSH_GSS_CLEAR_BUF(&gss_rcvtok);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* When acquire_cred yields no useful expiration, get a proxy for
|
|
|
|
|
* the cred expiration from the context expiration.
|
|
|
|
|
*/
|
|
|
|
|
gss_stat = s->shgss->lib->init_sec_context(
|
|
|
|
|
s->shgss->lib, &gss_ctx, s->shgss->srv_name,
|
|
|
|
|
0 /* don't delegate */, &gss_rcvtok, &gss_sndtok,
|
|
|
|
|
(gss_cred_expiry == GSS_NO_EXPIRATION ? &gss_cred_expiry : NULL),
|
|
|
|
|
&s->gss_ctxt_lifetime);
|
|
|
|
|
|
|
|
|
|
/* This context was for testing only. */
|
|
|
|
|
if (gss_ctx)
|
|
|
|
|
s->shgss->lib->release_cred(s->shgss->lib, &gss_ctx);
|
|
|
|
|
|
|
|
|
|
if (gss_stat != SSH_GSS_OK &&
|
|
|
|
|
gss_stat != SSH_GSS_S_CONTINUE_NEEDED) {
|
|
|
|
|
/*
|
|
|
|
|
* No point in verbosely interrupting the user to tell them we
|
|
|
|
|
* couldn't get GSS credentials, if this was only a check
|
|
|
|
|
* between key exchanges to see if fresh ones were available.
|
|
|
|
|
* When we do do a rekey, this message (if displayed) will
|
|
|
|
|
* appear among the standard rekey blurb, but when we're not,
|
|
|
|
|
* it shouldn't pop up all the time regardless.
|
|
|
|
|
*/
|
|
|
|
|
if (definitely_rekeying)
|
|
|
|
|
ppl_logevent(("No GSSAPI security context available"));
|
|
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (gss_sndtok.length)
|
|
|
|
|
s->shgss->lib->free_tok(s->shgss->lib, &gss_sndtok);
|
|
|
|
|
|
|
|
|
|
s->gss_status |= GSS_KEX_CAPABLE;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* When rekeying to cascade, avoding doing this too close to the
|
|
|
|
|
* context expiration time, since the key exchange might fail.
|
|
|
|
|
*/
|
|
|
|
|
if (s->gss_ctxt_lifetime < MIN_CTXT_LIFETIME)
|
|
|
|
|
s->gss_status |= GSS_CTXT_MAYFAIL;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If we're not delegating credentials, rekeying is not used to
|
|
|
|
|
* refresh them. We must avoid setting GSS_CRED_UPDATED or
|
|
|
|
|
* GSS_CTXT_EXPIRES when credential delegation is disabled.
|
|
|
|
|
*/
|
|
|
|
|
if (conf_get_int(s->conf, CONF_gssapifwd) == 0)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
if (s->gss_cred_expiry != GSS_NO_EXPIRATION &&
|
|
|
|
|
difftime(gss_cred_expiry, s->gss_cred_expiry) > 0)
|
|
|
|
|
s->gss_status |= GSS_CRED_UPDATED;
|
|
|
|
|
|
|
|
|
|
mins = sanitise_rekey_time(
|
|
|
|
|
conf_get_int(s->conf, CONF_gssapirekey), GSS_DEF_REKEY_MINS);
|
|
|
|
|
if (mins > 0 && s->gss_ctxt_lifetime <= mins * 60)
|
|
|
|
|
s->gss_status |= GSS_CTXT_EXPIRES;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ptrlen ssh2_transport_get_session_id(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh2_transport_state *s;
|
|
|
|
|
|
|
|
|
|
assert(ppl->vt == &ssh2_transport_vtable);
|
2018-10-06 01:49:08 +03:00
|
|
|
s = container_of(ppl, struct ssh2_transport_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
assert(s->got_session_id);
|
|
|
|
|
return make_ptrlen(s->session_id, s->session_id_len);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void ssh2_transport_notify_auth_done(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh2_transport_state *s;
|
|
|
|
|
|
|
|
|
|
assert(ppl->vt == &ssh2_transport_vtable);
|
2018-10-06 01:49:08 +03:00
|
|
|
s = container_of(ppl, struct ssh2_transport_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
s->rekey_reason = NULL; /* will be filled in later */
|
|
|
|
|
s->rekey_class = RK_POST_USERAUTH;
|
|
|
|
|
queue_idempotent_callback(&s->ppl.ic_process_queue);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#endif /* NO_GSSAPI */
|
|
|
|
|
|
|
|
|
|
static int ssh2_transport_get_specials(
|
|
|
|
|
PacketProtocolLayer *ppl, add_special_fn_t add_special, void *ctx)
|
|
|
|
|
{
|
|
|
|
|
struct ssh2_transport_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh2_transport_state, ppl);
|
2018-10-29 22:50:29 +03:00
|
|
|
int need_separator = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
int toret;
|
|
|
|
|
|
|
|
|
|
if (ssh_ppl_get_specials(s->higher_layer, add_special, ctx)) {
|
2018-10-29 22:50:29 +03:00
|
|
|
need_separator = true;
|
|
|
|
|
toret = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Don't bother offering rekey-based specials if we've decided the
|
|
|
|
|
* remote won't cope with it, since we wouldn't bother sending it
|
|
|
|
|
* if asked anyway.
|
|
|
|
|
*/
|
|
|
|
|
if (!(s->ppl.remote_bugs & BUG_SSH2_REKEY)) {
|
|
|
|
|
if (need_separator) {
|
|
|
|
|
add_special(ctx, NULL, SS_SEP, 0);
|
2018-10-29 22:50:29 +03:00
|
|
|
need_separator = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
add_special(ctx, "Repeat key exchange", SS_REKEY, 0);
|
2018-10-29 22:50:29 +03:00
|
|
|
toret = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
if (s->n_uncert_hostkeys) {
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
add_special(ctx, NULL, SS_SEP, 0);
|
|
|
|
|
add_special(ctx, "Cache new host key type", SS_SUBMENU, 0);
|
|
|
|
|
for (i = 0; i < s->n_uncert_hostkeys; i++) {
|
|
|
|
|
const ssh_keyalg *alg =
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
ssh2_hostkey_algs[s->uncert_hostkeys[i]].alg;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
add_special(ctx, alg->ssh_id, SS_XCERT, s->uncert_hostkeys[i]);
|
|
|
|
|
}
|
|
|
|
|
add_special(ctx, NULL, SS_EXITMENU, 0);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return toret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh2_transport_special_cmd(PacketProtocolLayer *ppl,
|
|
|
|
|
SessionSpecialCode code, int arg)
|
|
|
|
|
{
|
|
|
|
|
struct ssh2_transport_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh2_transport_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
if (code == SS_REKEY) {
|
|
|
|
|
if (!s->kex_in_progress) {
|
|
|
|
|
s->rekey_reason = "at user request";
|
|
|
|
|
s->rekey_class = RK_NORMAL;
|
|
|
|
|
queue_idempotent_callback(&s->ppl.ic_process_queue);
|
|
|
|
|
}
|
|
|
|
|
} else if (code == SS_XCERT) {
|
|
|
|
|
if (!s->kex_in_progress) {
|
Move client-specific SSH code into new files.
This is a major code reorganisation in preparation for making this
code base into one that can build an SSH server as well as a client.
(Mostly for purposes of using the server as a regression test suite
for the client, though I have some other possible uses in mind too.
However, it's currently no part of my plan to harden the server to the
point where it can sensibly be deployed in a hostile environment.)
In this preparatory commit, I've broken up the SSH-2 transport and
connection layers, and the SSH-1 connection layer, into multiple
source files, with each layer having its own header file containing
the shared type definitions. In each case, the new source file
contains code that's specific to the client side of the protocol, so
that a new file can be swapped in in its place when building the
server.
Mostly this is just a straightforward moving of code without changing
it very much, but there are a couple of actual changes in the process:
The parsing of SSH-2 global-request and channel open-messages is now
done by a new pair of functions in the client module. For channel
opens, I've invented a new union data type to be the return value from
that function, representing either failure (plus error message),
success (plus Channel instance to manage the new channel), or an
instruction to hand the channel over to a sharing downstream (plus a
pointer to the downstream in question).
Also, the tree234 of remote port forwardings in ssh2connection is now
initialised on first use by the client-specific code, so that's where
its compare function lives. The shared ssh2connection_free() still
takes responsibility for freeing it, but now has to check if it's
non-null first.
The outer shell of the ssh2_lportfwd_open method, for making a
local-to-remote port forwarding, is still centralised in
ssh2connection.c, but the part of it that actually constructs the
outgoing channel-open message has moved into the client code, because
that will have to change depending on whether the channel-open has to
have type direct-tcpip or forwarded-tcpip.
In the SSH-1 connection layer, half the filter_queue method has moved
out into the new client-specific code, but not all of it -
bidirectional channel maintenance messages are still handled
centrally. One exception is SSH_MSG_PORT_OPEN, which can be sent in
both directions, but with subtly different semantics - from server to
client, it's referring to a previously established remote forwarding
(and must be rejected if there isn't one that matches it), but from
client to server it's just a "direct-tcpip" request with no prior
context. So that one is in the client-specific module, and when I add
the server code it will have its own different handler.
2018-10-20 19:57:37 +03:00
|
|
|
s->hostkey_alg = ssh2_hostkey_algs[arg].alg;
|
2018-10-29 22:50:29 +03:00
|
|
|
s->cross_certifying = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
s->rekey_reason = "cross-certifying new host key";
|
|
|
|
|
s->rekey_class = RK_NORMAL;
|
|
|
|
|
queue_idempotent_callback(&s->ppl.ic_process_queue);
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
/* Send everything else to the next layer up. This includes
|
|
|
|
|
* SS_PING/SS_NOP, which we _could_ handle here - but it's
|
|
|
|
|
* better to put them in the connection layer, so they'll
|
|
|
|
|
* still work in bare connection mode. */
|
|
|
|
|
ssh_ppl_special_cmd(s->higher_layer, code, arg);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Safely convert rekey_time to unsigned long minutes */
|
|
|
|
|
static unsigned long sanitise_rekey_time(int rekey_time, unsigned long def)
|
|
|
|
|
{
|
|
|
|
|
if (rekey_time < 0 || rekey_time > MAX_TICK_MINS)
|
|
|
|
|
rekey_time = def;
|
|
|
|
|
return (unsigned long)rekey_time;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh2_transport_set_max_data_size(struct ssh2_transport_state *s)
|
|
|
|
|
{
|
|
|
|
|
s->max_data_size = parse_blocksize(
|
|
|
|
|
conf_get_str(s->conf, CONF_ssh_rekey_data));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh2_transport_reconfigure(PacketProtocolLayer *ppl, Conf *conf)
|
|
|
|
|
{
|
|
|
|
|
struct ssh2_transport_state *s;
|
|
|
|
|
const char *rekey_reason = NULL;
|
2018-10-29 22:50:29 +03:00
|
|
|
int rekey_mandatory = false;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
unsigned long old_max_data_size, rekey_time;
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
assert(ppl->vt == &ssh2_transport_vtable);
|
2018-10-06 01:49:08 +03:00
|
|
|
s = container_of(ppl, struct ssh2_transport_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
rekey_time = sanitise_rekey_time(
|
|
|
|
|
conf_get_int(conf, CONF_ssh_rekey_time), 60);
|
|
|
|
|
if (ssh2_transport_timer_update(s, rekey_time))
|
|
|
|
|
rekey_reason = "timeout shortened";
|
|
|
|
|
|
|
|
|
|
old_max_data_size = s->max_data_size;
|
|
|
|
|
ssh2_transport_set_max_data_size(s);
|
|
|
|
|
if (old_max_data_size != s->max_data_size &&
|
|
|
|
|
s->max_data_size != 0) {
|
|
|
|
|
if (s->max_data_size < old_max_data_size) {
|
|
|
|
|
unsigned long diff = old_max_data_size - s->max_data_size;
|
|
|
|
|
|
2018-10-30 21:09:12 +03:00
|
|
|
/* We must decrement both counters, so avoid short-circuit
|
|
|
|
|
* evaluation skipping one */
|
|
|
|
|
int out_expired = DTS_CONSUME(s->stats, out, diff) != 0;
|
|
|
|
|
int in_expired = DTS_CONSUME(s->stats, in, diff) != 0;
|
|
|
|
|
if (out_expired || in_expired)
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
rekey_reason = "data limit lowered";
|
|
|
|
|
} else {
|
|
|
|
|
unsigned long diff = s->max_data_size - old_max_data_size;
|
|
|
|
|
if (s->stats->out.running)
|
|
|
|
|
s->stats->out.remaining += diff;
|
|
|
|
|
if (s->stats->in.running)
|
|
|
|
|
s->stats->in.remaining += diff;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (conf_get_int(s->conf, CONF_compression) !=
|
|
|
|
|
conf_get_int(conf, CONF_compression)) {
|
|
|
|
|
rekey_reason = "compression setting changed";
|
2018-10-29 22:50:29 +03:00
|
|
|
rekey_mandatory = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < CIPHER_MAX; i++)
|
|
|
|
|
if (conf_get_int_int(s->conf, CONF_ssh_cipherlist, i) !=
|
|
|
|
|
conf_get_int_int(conf, CONF_ssh_cipherlist, i)) {
|
|
|
|
|
rekey_reason = "cipher settings changed";
|
2018-10-29 22:50:29 +03:00
|
|
|
rekey_mandatory = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
if (conf_get_int(s->conf, CONF_ssh2_des_cbc) !=
|
|
|
|
|
conf_get_int(conf, CONF_ssh2_des_cbc)) {
|
|
|
|
|
rekey_reason = "cipher settings changed";
|
2018-10-29 22:50:29 +03:00
|
|
|
rekey_mandatory = true;
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
conf_free(s->conf);
|
|
|
|
|
s->conf = conf_copy(conf);
|
|
|
|
|
|
|
|
|
|
if (rekey_reason) {
|
Support OpenSSH delayed compression without a rekey.
The problem with OpenSSH delayed compression is that the spec has a
race condition. Compression is enabled when the server sends
USERAUTH_SUCCESS. In the server->client direction, that's fine: the
USERAUTH_SUCCESS packet is not itself compressed, and the next packet
in the same direction is. But in the client->server direction, this
specification relies on there being a moment of half-duplex in the
connection: the client can't send any outgoing packet _after_ whatever
userauth packet the USERAUTH_SUCCESS was a response to, and _before_
finding out whether the response is USERAUTH_SUCCESS or something
else. If it emitted, say, an SSH_MSG_IGNORE or initiated a rekey
(perhaps due to a timeout), then that might cross in the network with
USERAUTH_SUCCESS and the server wouldn't be able to know whether to
treat it as compressed.
My previous solution was to note the presence of delayed compression
options in the server KEXINIT, but not to negotiate them in the
initial key exchange. Instead, we conduct the userauth exchange with
compression="none", and then once userauth has concluded, we trigger
an immediate rekey in which we do accept delayed compression methods -
because of course by that time they're no different from the non-
delayed versions. And that means compression is enabled by the
bidirectional NEWKEYS exchange, which lacks that race condition.
I think OpenSSH itself gets away with this because its layer structure
is structure so as to never send any such asynchronous transport-layer
message in the middle of userauth. Ours is not. But my cunning plan is
that now that my BPP abstraction includes a queue of packets to be
sent and a callback that processes that queue on to the output raw
data bufchain, it's possible to make that callback terminate early, to
leave any dangerous transport-layer messages unsent while we wait for
a userauth response.
Specifically: if we've negotiated a delayed compression method and not
yet seen USERAUTH_SUCCESS, then ssh2_bpp_handle_output will emit all
packets from its queue up to and including the last one in the
userauth type-code range, and keep back any further ones. The idea is
that _if_ that last userauth message was one that might provoke
USERAUTH_SUCCESS, we don't want to send any difficult things after it;
if it's not (e.g. it's in the middle of some ongoing userauth process
like k-i or GSS) then the userauth layer will know that, and will emit
some further userauth packet on its own initiative which will clue us
in that it's OK to release everything up to and including that one.
(So in particular it wasn't even necessary to forbid _all_ transport-
layer packets during userauth. I could have done that by reordering
the output queue - packets in that queue haven't been assigned their
sequence numbers yet, so that would have been safe - but it's more
elegant not to have to.)
One particular case we do have to be careful about is not trying to
initiate a _rekey_ during userauth, if delayed compression is in the
offing. That's because when we start rekeying, ssh2transport stops
sending any higher-layer packets at all, to discourage servers from
trying to ignore the KEXINIT and press on regardless - you don't get
your higher-layer replies until you actually respond to the
lower-layer interrupt. But in this case, if ssh2transport sent a
KEXINIT, which ssh2bpp kept back in the queue to avoid a delayed
compression race and would only send if another userauth packet
followed it, which ssh2transport would never pass on to ssh2bpp's
output queue, there'd be a complete protocol deadlock. So instead I
defer any attempt to start a rekey until after userauth finishes
(using the existing system for starting a deferred rekey at that
moment, which was previously used for the _old_ delayed-compression
strategy, and still has to be here anyway for GSSAPI purposes).
2018-10-07 11:10:14 +03:00
|
|
|
if (!s->kex_in_progress && !ssh2_bpp_rekey_inadvisable(s->ppl.bpp)) {
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
s->rekey_reason = rekey_reason;
|
|
|
|
|
s->rekey_class = RK_NORMAL;
|
|
|
|
|
queue_idempotent_callback(&s->ppl.ic_process_queue);
|
|
|
|
|
} else if (rekey_mandatory) {
|
|
|
|
|
s->deferred_rekey_reason = rekey_reason;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Also pass the configuration along to our higher layer */
|
|
|
|
|
ssh_ppl_reconfigure(s->higher_layer, conf);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ssh2_transport_want_user_input(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh2_transport_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh2_transport_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
/* Just delegate this to the higher layer */
|
|
|
|
|
return ssh_ppl_want_user_input(s->higher_layer);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ssh2_transport_got_user_input(PacketProtocolLayer *ppl)
|
|
|
|
|
{
|
|
|
|
|
struct ssh2_transport_state *s =
|
2018-10-06 01:49:08 +03:00
|
|
|
container_of(ppl, struct ssh2_transport_state, ppl);
|
Move most of ssh.c out into separate source files.
I've tried to separate out as many individually coherent changes from
this work as I could into their own commits, but here's where I run
out and have to commit the rest of this major refactoring as a
big-bang change.
Most of ssh.c is now no longer in ssh.c: all five of the main
coroutines that handle layers of the SSH-1 and SSH-2 protocols now
each have their own source file to live in, and a lot of the
supporting functions have moved into the appropriate one of those too.
The new abstraction is a vtable called 'PacketProtocolLayer', which
has an input and output packet queue. Each layer's main coroutine is
invoked from the method ssh_ppl_process_queue(), which is usually
(though not exclusively) triggered automatically when things are
pushed on the input queue. In SSH-2, the base layer is the transport
protocol, and it contains a pair of subsidiary queues by which it
passes some of its packets to the higher SSH-2 layers - first userauth
and then connection, which are peers at the same level, with the
former abdicating in favour of the latter at the appropriate moment.
SSH-1 is simpler: the whole login phase of the protocol (crypto setup
and authentication) is all in one module, and since SSH-1 has no
repeat key exchange, that setup layer abdicates in favour of the
connection phase when it's done.
ssh.c itself is now about a tenth of its old size (which all by itself
is cause for celebration!). Its main job is to set up all the layers,
hook them up to each other and to the BPP, and to funnel data back and
forth between that collection of modules and external things such as
the network and the terminal. Once it's set up a collection of packet
protocol layers, it communicates with them partly by calling methods
of the base layer (and if that's ssh2transport then it will delegate
some functionality to the corresponding methods of its higher layer),
and partly by talking directly to the connection layer no matter where
it is in the stack by means of the separate ConnectionLayer vtable
which I introduced in commit 8001dd4cb, and to which I've now added
quite a few extra methods replacing services that used to be internal
function calls within ssh.c.
(One effect of this is that the SSH-1 and SSH-2 channel storage is now
no longer shared - there are distinct struct types ssh1_channel and
ssh2_channel. That means a bit more code duplication, but on the plus
side, a lot fewer confusing conditionals in the middle of half-shared
functions, and less risk of a piece of SSH-1 escaping into SSH-2 or
vice versa, which I remember has happened at least once in the past.)
The bulk of this commit introduces the five new source files, their
common header sshppl.h and some shared supporting routines in
sshcommon.c, and rewrites nearly all of ssh.c itself. But it also
includes a couple of other changes that I couldn't separate easily
enough:
Firstly, there's a new handling for socket EOF, in which ssh.c sets an
'input_eof' flag in the BPP, and that responds by checking a flag that
tells it whether to report the EOF as an error or not. (This is the
main reason for those new BPP_READ / BPP_WAITFOR macros - they can
check the EOF flag every time the coroutine is resumed.)
Secondly, the error reporting itself is changed around again. I'd
expected to put some data fields in the public PacketProtocolLayer
structure that it could set to report errors in the same way as the
BPPs have been doing, but in the end, I decided propagating all those
data fields around was a pain and that even the BPPs shouldn't have
been doing it that way. So I've reverted to a system where everything
calls back to functions in ssh.c itself to report any connection-
ending condition. But there's a new family of those functions,
categorising the possible such conditions by semantics, and each one
has a different set of detailed effects (e.g. how rudely to close the
network connection, what exit status should be passed back to the
whole application, whether to send a disconnect message and/or display
a GUI error box).
I don't expect this to be immediately perfect: of course, the code has
been through a big upheaval, new bugs are expected, and I haven't been
able to do a full job of testing (e.g. I haven't tested every auth or
kex method). But I've checked that it _basically_ works - both SSH
protocols, all the different kinds of forwarding channel, more than
one auth method, Windows and Linux, connection sharing - and I think
it's now at the point where the easiest way to find further bugs is to
let it out into the wild and see what users can spot.
2018-09-24 20:28:16 +03:00
|
|
|
|
|
|
|
|
/* Just delegate this to the higher layer */
|
|
|
|
|
ssh_ppl_got_user_input(s->higher_layer);
|
|
|
|
|
}
|