github
/
putty
зеркало из https://github.com/github/putty.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
putty/config.c

2865 строки
95 KiB
C
Исходник Обычный вид История

The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* config.c - the platform-independent parts of the PuTTY
* configuration box.
*/
#include <assert.h>
#include <stdlib.h>
#include "putty.h"
#include "dialog.h"
#include "storage.h"
#define PRINTER_DISABLED_STRING "None (printing disabled)"
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
#define HOST_BOX_TITLE "Host Name (or IP address)"
#define PORT_BOX_TITLE "Port"
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
void conf_radiobutton_handler(union control *ctrl, dlgparam *dlg,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
void *data, int event)
{
int button;
Conf *conf = (Conf *)data;
/*
* For a standard radio button set, the context parameter gives
* the primary key (CONF_foo), and the extra data per button
* gives the value the target field should take if that button
* is the one selected.
*/
if (event == EVENT_REFRESH) {
int val = conf_get_int(conf, ctrl->radio.context.i);
for (button = 0; button < ctrl->radio.nbuttons; button++)
if (val == ctrl->radio.buttondata[button].i)
break;
/* We expected that `break' to happen, in all circumstances. */
assert(button < ctrl->radio.nbuttons);
dlg_radiobutton_set(ctrl, dlg, button);
} else if (event == EVENT_VALCHANGE) {
button = dlg_radiobutton_get(ctrl, dlg);
assert(button >= 0 && button < ctrl->radio.nbuttons);
conf_set_int(conf, ctrl->radio.context.i,
ctrl->radio.buttondata[button].i);
}
}
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
void conf_radiobutton_bool_handler(union control *ctrl, dlgparam *dlg,
void *data, int event)
{
int button;
Conf *conf = (Conf *)data;
/*
* Same as conf_radiobutton_handler, but using conf_set_bool in
* place of conf_set_int, because it's dealing with a bool-typed
* config option.
*/
if (event == EVENT_REFRESH) {
int val = conf_get_bool(conf, ctrl->radio.context.i);
for (button = 0; button < ctrl->radio.nbuttons; button++)
if (val == ctrl->radio.buttondata[button].i)
break;
/* We expected that `break' to happen, in all circumstances. */
assert(button < ctrl->radio.nbuttons);
dlg_radiobutton_set(ctrl, dlg, button);
} else if (event == EVENT_VALCHANGE) {
button = dlg_radiobutton_get(ctrl, dlg);
assert(button >= 0 && button < ctrl->radio.nbuttons);
conf_set_bool(conf, ctrl->radio.context.i,
ctrl->radio.buttondata[button].i);
}
}
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
#define CHECKBOX_INVERT (1<<30)
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
void conf_checkbox_handler(union control *ctrl, dlgparam *dlg,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
void *data, int event)
{
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
int key;
bool invert;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
/*
* For a standard checkbox, the context parameter gives the
* primary key (CONF_foo), optionally ORed with CHECKBOX_INVERT.
*/
key = ctrl->checkbox.context.i;
if (key & CHECKBOX_INVERT) {
key &= ~CHECKBOX_INVERT;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
invert = true;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
} else
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
invert = false;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
/*
* C lacks a logical XOR, so the following code uses the idiom
* (!a ^ !b) to obtain the logical XOR of a and b. (That is, 1
* iff exactly one of a and b is nonzero, otherwise 0.)
*/
if (event == EVENT_REFRESH) {
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
bool val = conf_get_bool(conf, key);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
dlg_checkbox_set(ctrl, dlg, (!val ^ !invert));
} else if (event == EVENT_VALCHANGE) {
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
conf_set_bool(conf, key, !dlg_checkbox_get(ctrl,dlg) ^ !invert);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
void conf_editbox_handler(union control *ctrl, dlgparam *dlg,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
void *data, int event)
{
/*
* The standard edit-box handler expects the main `context'
* field to contain the primary key. The secondary `context2'
* field indicates the type of this field:
*
* - if context2 > 0, the field is a string.
* - if context2 == -1, the field is an int and the edit box
* is numeric.
* - if context2 < -1, the field is an int and the edit box is
* _floating_, and (-context2) gives the scale. (E.g. if
* context2 == -1000, then typing 1.2 into the box will set
* the field to 1200.)
*/
int key = ctrl->editbox.context.i;
int length = ctrl->editbox.context2.i;
Conf *conf = (Conf *)data;
if (length > 0) {
if (event == EVENT_REFRESH) {
char *field = conf_get_str(conf, key);
dlg_editbox_set(ctrl, dlg, field);
} else if (event == EVENT_VALCHANGE) {
char *field = dlg_editbox_get(ctrl, dlg);
conf_set_str(conf, key, field);
sfree(field);
}
} else if (length < 0) {
if (event == EVENT_REFRESH) {
char str[80];
int value = conf_get_int(conf, key);
if (length == -1)
sprintf(str, "%d", value);
else
sprintf(str, "%g", (double)value / (double)(-length));
dlg_editbox_set(ctrl, dlg, str);
} else if (event == EVENT_VALCHANGE) {
char *str = dlg_editbox_get(ctrl, dlg);
if (length == -1)
conf_set_int(conf, key, atoi(str));
else
conf_set_int(conf, key, (int)((-length) * atof(str)));
sfree(str);
}
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
void conf_filesel_handler(union control *ctrl, dlgparam *dlg,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
void *data, int event)
{
int key = ctrl->fileselect.context.i;
Conf *conf = (Conf *)data;
if (event == EVENT_REFRESH) {
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
dlg_filesel_set(
ctrl, dlg, conf_get_filename(conf, key));
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
} else if (event == EVENT_VALCHANGE) {
Turn 'Filename' into a dynamically allocated type with no arbitrary length limit, just as I did to FontSpec yesterday. [originally from svn r9316]
2011-10-02 15:01:57 +04:00
Filename *filename = dlg_filesel_get(ctrl, dlg);
conf_set_filename(conf, key, filename);
filename_free(filename);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
void conf_fontsel_handler(union control *ctrl, dlgparam *dlg,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
void *data, int event)
{
int key = ctrl->fontselect.context.i;
Conf *conf = (Conf *)data;
if (event == EVENT_REFRESH) {
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
dlg_fontsel_set(
ctrl, dlg, conf_get_fontspec(conf, key));
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
} else if (event == EVENT_VALCHANGE) {
Change the semantics of 'FontSpec' so that it's a dynamically allocated type. The main reason for this is to stop it from taking up a fixed large amount of space in every 'struct value' subunion in conf.c, although that makes little difference so far because Filename is still doing the same thing (and is therefore next on my list). However, the removal of its arbitrary length limit is not to be sneezed at. [originally from svn r9314]
2011-10-01 21:38:59 +04:00
FontSpec *fontspec = dlg_fontsel_get(ctrl, dlg);
conf_set_fontspec(conf, key, fontspec);
fontspec_free(fontspec);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void config_host_handler(union control *ctrl, dlgparam *dlg,
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
/*
* This function works just like the standard edit box handler,
* only it has to choose the control's label and text from two
* different places depending on the protocol.
*/
if (event == EVENT_REFRESH) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
if (conf_get_int(conf, CONF_protocol) == PROT_SERIAL) {
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
/*
* This label text is carefully chosen to contain an n,
* since that's the shortcut for the host name control.
*/
dlg_label_change(ctrl, dlg, "Serial line");
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
dlg_editbox_set(ctrl, dlg, conf_get_str(conf, CONF_serline));
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
} else {
dlg_label_change(ctrl, dlg, HOST_BOX_TITLE);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
dlg_editbox_set(ctrl, dlg, conf_get_str(conf, CONF_host));
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
}
} else if (event == EVENT_VALCHANGE) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *s = dlg_editbox_get(ctrl, dlg);
if (conf_get_int(conf, CONF_protocol) == PROT_SERIAL)
conf_set_str(conf, CONF_serline, s);
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
else
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_str(conf, CONF_host, s);
sfree(s);
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void config_port_handler(union control *ctrl, dlgparam *dlg,
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
char buf[80];
/*
Tweak to r7635: when changing between protocols in the configuration dialog and avoiding trashing a non-default port, don't treat a port of 0 as special; this was causing defaults to "freeze in" for sequences of clicks like SSH, Raw, Telnet. Arrange that a port of 0 (which in a backend indicates no default) is displayed as a blank in the port box, to make this less jarring. [originally from svn r9077] [r7635 == db7cc1cba6dbd229db63d8ab1b2b86125c5d5933]
2011-01-14 22:57:00 +03:00
* This function works similarly to the standard edit box handler,
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
* only it has to choose the control's label and text from two
* different places depending on the protocol.
*/
if (event == EVENT_REFRESH) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
if (conf_get_int(conf, CONF_protocol) == PROT_SERIAL) {
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
/*
* This label text is carefully chosen to contain a p,
* since that's the shortcut for the port control.
*/
dlg_label_change(ctrl, dlg, "Speed");
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
sprintf(buf, "%d", conf_get_int(conf, CONF_serspeed));
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
} else {
dlg_label_change(ctrl, dlg, PORT_BOX_TITLE);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
if (conf_get_int(conf, CONF_port) != 0)
sprintf(buf, "%d", conf_get_int(conf, CONF_port));
Tweak to r7635: when changing between protocols in the configuration dialog and avoiding trashing a non-default port, don't treat a port of 0 as special; this was causing defaults to "freeze in" for sequences of clicks like SSH, Raw, Telnet. Arrange that a port of 0 (which in a backend indicates no default) is displayed as a blank in the port box, to make this less jarring. [originally from svn r9077] [r7635 == db7cc1cba6dbd229db63d8ab1b2b86125c5d5933]
2011-01-14 22:57:00 +03:00
else
/* Display an (invalid) port of 0 as blank */
buf[0] = '\0';
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
}
dlg_editbox_set(ctrl, dlg, buf);
} else if (event == EVENT_VALCHANGE) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *s = dlg_editbox_get(ctrl, dlg);
int i = atoi(s);
sfree(s);
if (conf_get_int(conf, CONF_protocol) == PROT_SERIAL)
conf_set_int(conf, CONF_serspeed, i);
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
else
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_int(conf, CONF_port, i);
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
}
}
struct hostport {
union control *host, *port;
};
/*
* We export this function so that platform-specific config
* routines can use it to conveniently identify the protocol radio
* buttons in order to add to them.
*/
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
void config_protocolbuttons_handler(union control *ctrl, dlgparam *dlg,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
void *data, int event)
{
Implement Marcin Bulandra's suggestion of only automatically updating the port number in the GUI when the connection type is changed if the current port number is the standard one for the current protocol. It's not perfect, but it should make the common case of tabbing through the Session panel easier when starting non-SSH connections on odd ports. [originally from svn r7635]
2007-07-01 19:47:31 +04:00
int button;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
struct hostport *hp = (struct hostport *)ctrl->radio.context.p;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* This function works just like the standard radio-button
* handler, except that it also has to change the setting of
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
* the port box, and refresh both host and port boxes when. We
* expect the context parameter to point at a hostport
* structure giving the `union control's for both.
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
*/
if (event == EVENT_REFRESH) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
int protocol = conf_get_int(conf, CONF_protocol);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
for (button = 0; button < ctrl->radio.nbuttons; button++)
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
if (protocol == ctrl->radio.buttondata[button].i)
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
break;
/* We expected that `break' to happen, in all circumstances. */
assert(button < ctrl->radio.nbuttons);
dlg_radiobutton_set(ctrl, dlg, button);
} else if (event == EVENT_VALCHANGE) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
int oldproto = conf_get_int(conf, CONF_protocol);
int newproto, port;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
button = dlg_radiobutton_get(ctrl, dlg);
assert(button >= 0 && button < ctrl->radio.nbuttons);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
newproto = ctrl->radio.buttondata[button].i;
conf_set_int(conf, CONF_protocol, newproto);
if (oldproto != newproto) {
Name vtable structure types more consistently. Now they're all called FooVtable, instead of a mixture of that and Foo_vtable.
2018-10-05 09:03:46 +03:00
const struct BackendVtable *ovt = backend_vt_from_proto(oldproto);
const struct BackendVtable *nvt = backend_vt_from_proto(newproto);
Turn Backend into a sensible classoid. Nearly every part of the code that ever handles a full backend structure has historically done it using a pair of pointer variables, one pointing at a constant struct full of function pointers, and the other pointing to a 'void *' state object that's passed to each of those. While I'm modernising the rest of the code, this seems like a good time to turn that into the same more or less type-safe and less cumbersome system as I'm using for other parts of the code, such as Socket, Plug, BinaryPacketProtocol and so forth: the Backend structure contains a vtable pointer, and a system of macro wrappers handles dispatching through that vtable.
2018-09-11 18:23:38 +03:00
assert(ovt);
assert(nvt);
Tweak to r7635: when changing between protocols in the configuration dialog and avoiding trashing a non-default port, don't treat a port of 0 as special; this was causing defaults to "freeze in" for sequences of clicks like SSH, Raw, Telnet. Arrange that a port of 0 (which in a backend indicates no default) is displayed as a blank in the port box, to make this less jarring. [originally from svn r9077] [r7635 == db7cc1cba6dbd229db63d8ab1b2b86125c5d5933]
2011-01-14 22:57:00 +03:00
/* Iff the user hasn't changed the port from the old protocol's
* default, update it with the new protocol's default.
* (This includes a "default" of 0, implying that there is no
* sensible default for that protocol; in this case it's
* displayed as a blank.)
* This helps with the common case of tabbing through the
* controls in order and setting a non-default port before
* getting to the protocol; we want that non-default port
* to be preserved. */
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
port = conf_get_int(conf, CONF_port);
Turn Backend into a sensible classoid. Nearly every part of the code that ever handles a full backend structure has historically done it using a pair of pointer variables, one pointing at a constant struct full of function pointers, and the other pointing to a 'void *' state object that's passed to each of those. While I'm modernising the rest of the code, this seems like a good time to turn that into the same more or less type-safe and less cumbersome system as I'm using for other parts of the code, such as Socket, Plug, BinaryPacketProtocol and so forth: the Backend structure contains a vtable pointer, and a system of macro wrappers handles dispatching through that vtable.
2018-09-11 18:23:38 +03:00
if (port == ovt->default_port)
conf_set_int(conf, CONF_port, nvt->default_port);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
dlg_refresh(hp->host, dlg);
dlg_refresh(hp->port, dlg);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void loggingbuttons_handler(union control *ctrl, dlgparam *dlg,
Fix pterm-logtype-crash [originally from svn r5505]
2005-03-15 13:43:29 +03:00
void *data, int event)
{
int button;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
Fix pterm-logtype-crash [originally from svn r5505]
2005-03-15 13:43:29 +03:00
/* This function works just like the standard radio-button handler,
* but it has to fall back to "no logging" in situations where the
* configured logging type isn't applicable.
*/
if (event == EVENT_REFRESH) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
int logtype = conf_get_int(conf, CONF_logtype);
Fix pterm-logtype-crash [originally from svn r5505]
2005-03-15 13:43:29 +03:00
for (button = 0; button < ctrl->radio.nbuttons; button++)
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
if (logtype == ctrl->radio.buttondata[button].i)
Fix pterm-logtype-crash [originally from svn r5505]
2005-03-15 13:43:29 +03:00
break;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
/* We fell off the end, so we lack the configured logging type */
if (button == ctrl->radio.nbuttons) {
button = 0;
conf_set_int(conf, CONF_logtype, LGTYP_NONE);
}
dlg_radiobutton_set(ctrl, dlg, button);
Fix pterm-logtype-crash [originally from svn r5505]
2005-03-15 13:43:29 +03:00
} else if (event == EVENT_VALCHANGE) {
button = dlg_radiobutton_get(ctrl, dlg);
assert(button >= 0 && button < ctrl->radio.nbuttons);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_int(conf, CONF_logtype, ctrl->radio.buttondata[button].i);
Fix pterm-logtype-crash [originally from svn r5505]
2005-03-15 13:43:29 +03:00
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void numeric_keypad_handler(union control *ctrl, dlgparam *dlg,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
void *data, int event)
{
int button;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* This function works much like the standard radio button
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
* handler, but it has to handle two fields in Conf.
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
*/
if (event == EVENT_REFRESH) {
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
if (conf_get_bool(conf, CONF_nethack_keypad))
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
button = 2;
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
else if (conf_get_bool(conf, CONF_app_keypad))
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
button = 1;
else
button = 0;
assert(button < ctrl->radio.nbuttons);
dlg_radiobutton_set(ctrl, dlg, button);
} else if (event == EVENT_VALCHANGE) {
button = dlg_radiobutton_get(ctrl, dlg);
assert(button >= 0 && button < ctrl->radio.nbuttons);
if (button == 2) {
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
conf_set_bool(conf, CONF_app_keypad, false);
conf_set_bool(conf, CONF_nethack_keypad, true);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
} else {
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
conf_set_bool(conf, CONF_app_keypad, (button != 0));
conf_set_bool(conf, CONF_nethack_keypad, false);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void cipherlist_handler(union control *ctrl, dlgparam *dlg,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
if (event == EVENT_REFRESH) {
int i;
Giant const-correctness patch of doom! Having found a lot of unfixed constness issues in recent development, I thought perhaps it was time to get proactive, so I compiled the whole codebase with -Wwrite-strings. That turned up a huge load of const problems, which I've fixed in this commit: the Unix build now goes cleanly through with -Wwrite-strings, and the Windows build is as close as I could get it (there are some lingering issues due to occasional Windows API functions like AcquireCredentialsHandle not having the right constness). Notable fallout beyond the purely mechanical changing of types: - the stuff saved by cmdline_save_param() is now explicitly dupstr()ed, and freed in cmdline_run_saved. - I couldn't make both string arguments to cmdline_process_param() const, because it intentionally writes to one of them in the case where it's the argument to -pw (in the vain hope of being at least slightly friendly to 'ps'), so elsewhere I had to temporarily dupstr() something for the sake of passing it to that function - I had to invent a silly parallel version of const_cmp() so I could pass const string literals in to lookup functions. - stripslashes() in pscp.c and psftp.c has the annoying strchr nature
2015-05-15 13:15:42 +03:00
static const struct { const char *s; int c; } ciphers[] = {
Add the ChaCha20-Poly1305 cipher+MAC, as implemented by OpenSSH.
2015-06-07 14:51:51 +03:00
{ "ChaCha20 (SSH-2 only)", CIPHER_CHACHA20 },
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
{ "3DES", CIPHER_3DES },
{ "Blowfish", CIPHER_BLOWFISH },
{ "DES", CIPHER_DES },
Consistently use a single notation to refer to SSH protocol versions, as discussed. Use Barrett and Silverman's convention of "SSH-1" for SSH protocol version 1 and "SSH-2" for protocol 2 ("SSH1"/"SSH2" refer to ssh.com implementations in this scheme). <http://www.snailbook.com/terms.html> [originally from svn r5480]
2005-03-10 19:36:05 +03:00
{ "AES (SSH-2 only)", CIPHER_AES },
Implement my experimental arcfour modes. The 256-bit version is disabled until I can test it against someone else's implementation. [originally from svn r5633]
2005-04-15 02:58:29 +04:00
{ "Arcfour (SSH-2 only)", CIPHER_ARCFOUR },
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
{ "-- warn below here --", CIPHER_WARN }
};
/* Set up the "selected ciphers" box. */
/* (cipherlist assumed to contain all ciphers) */
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
for (i = 0; i < CIPHER_MAX; i++) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
int c = conf_get_int_int(conf, CONF_ssh_cipherlist, i);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
int j;
Giant const-correctness patch of doom! Having found a lot of unfixed constness issues in recent development, I thought perhaps it was time to get proactive, so I compiled the whole codebase with -Wwrite-strings. That turned up a huge load of const problems, which I've fixed in this commit: the Unix build now goes cleanly through with -Wwrite-strings, and the Windows build is as close as I could get it (there are some lingering issues due to occasional Windows API functions like AcquireCredentialsHandle not having the right constness). Notable fallout beyond the purely mechanical changing of types: - the stuff saved by cmdline_save_param() is now explicitly dupstr()ed, and freed in cmdline_run_saved. - I couldn't make both string arguments to cmdline_process_param() const, because it intentionally writes to one of them in the case where it's the argument to -pw (in the vain hope of being at least slightly friendly to 'ps'), so elsewhere I had to temporarily dupstr() something for the sake of passing it to that function - I had to invent a silly parallel version of const_cmp() so I could pass const string literals in to lookup functions. - stripslashes() in pscp.c and psftp.c has the annoying strchr nature
2015-05-15 13:15:42 +03:00
const char *cstr = NULL;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
for (j = 0; j < (sizeof ciphers) / (sizeof ciphers[0]); j++) {
if (ciphers[j].c == c) {
cstr = ciphers[j].s;
break;
}
}
Rename dlg_listbox_addwithindex() to dlg_listbox_addwithid(), since the old name was, not to put too fine a point on it, wrong. [originally from svn r2997]
2003-03-26 02:45:56 +03:00
dlg_listbox_addwithid(ctrl, dlg, cstr, c);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
dlg_update_done(ctrl, dlg);
} else if (event == EVENT_VALCHANGE) {
int i;
/* Update array to match the list box. */
for (i=0; i < CIPHER_MAX; i++)
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_int_int(conf, CONF_ssh_cipherlist, i,
dlg_listbox_getid(ctrl, dlg, i));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}
Patch from Alejandro Sedeno, somewhat modified by me, which reorganises the GSSAPI support so that it handles alternative implementations of the GSS-API. In particular, this means PuTTY can now talk to MIT Kerberos for Windows instead of being limited to SSPI. I don't know for sure whether further tweaking will be needed (to the UI, most likely, or to automatic selection of credentials), but testing reports suggest it's now at least worth committing to trunk to get it more widely tested. [originally from svn r8952]
2010-05-19 22:22:17 +04:00
#ifndef NO_GSSAPI
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void gsslist_handler(union control *ctrl, dlgparam *dlg,
Patch from Alejandro Sedeno, somewhat modified by me, which reorganises the GSSAPI support so that it handles alternative implementations of the GSS-API. In particular, this means PuTTY can now talk to MIT Kerberos for Windows instead of being limited to SSPI. I don't know for sure whether further tweaking will be needed (to the UI, most likely, or to automatic selection of credentials), but testing reports suggest it's now at least worth committing to trunk to get it more widely tested. [originally from svn r8952]
2010-05-19 22:22:17 +04:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
Patch from Alejandro Sedeno, somewhat modified by me, which reorganises the GSSAPI support so that it handles alternative implementations of the GSS-API. In particular, this means PuTTY can now talk to MIT Kerberos for Windows instead of being limited to SSPI. I don't know for sure whether further tweaking will be needed (to the UI, most likely, or to automatic selection of credentials), but testing reports suggest it's now at least worth committing to trunk to get it more widely tested. [originally from svn r8952]
2010-05-19 22:22:17 +04:00
if (event == EVENT_REFRESH) {
int i;
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
for (i = 0; i < ngsslibs; i++) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
int id = conf_get_int_int(conf, CONF_ssh_gsslist, i);
Patch from Alejandro Sedeno, somewhat modified by me, which reorganises the GSSAPI support so that it handles alternative implementations of the GSS-API. In particular, this means PuTTY can now talk to MIT Kerberos for Windows instead of being limited to SSPI. I don't know for sure whether further tweaking will be needed (to the UI, most likely, or to automatic selection of credentials), but testing reports suggest it's now at least worth committing to trunk to get it more widely tested. [originally from svn r8952]
2010-05-19 22:22:17 +04:00
assert(id >= 0 && id < ngsslibs);
dlg_listbox_addwithid(ctrl, dlg, gsslibnames[id], id);
}
dlg_update_done(ctrl, dlg);
} else if (event == EVENT_VALCHANGE) {
int i;
/* Update array to match the list box. */
for (i=0; i < ngsslibs; i++)
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_int_int(conf, CONF_ssh_gsslist, i,
dlg_listbox_getid(ctrl, dlg, i));
Patch from Alejandro Sedeno, somewhat modified by me, which reorganises the GSSAPI support so that it handles alternative implementations of the GSS-API. In particular, this means PuTTY can now talk to MIT Kerberos for Windows instead of being limited to SSPI. I don't know for sure whether further tweaking will be needed (to the UI, most likely, or to automatic selection of credentials), but testing reports suggest it's now at least worth committing to trunk to get it more widely tested. [originally from svn r8952]
2010-05-19 22:22:17 +04:00
}
}
#endif
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void kexlist_handler(union control *ctrl, dlgparam *dlg,
Add a preference list for SSH-2 key exchange algorithms, on a new "Kex" panel (which will gain more content anon). Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never did find a way of automatically detecting this alleged server bug, and in any case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW). Also generalise askcipher() to a new askalg() (thus touching all the front-ends). I've made some attempt to document what SSH key exchange is and why you care, but it could use some review for clarity (and outright lies). [originally from svn r5022]
2004-12-23 05:24:07 +03:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
Add a preference list for SSH-2 key exchange algorithms, on a new "Kex" panel (which will gain more content anon). Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never did find a way of automatically detecting this alleged server bug, and in any case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW). Also generalise askcipher() to a new askalg() (thus touching all the front-ends). I've made some attempt to document what SSH key exchange is and why you care, but it could use some review for clarity (and outright lies). [originally from svn r5022]
2004-12-23 05:24:07 +03:00
if (event == EVENT_REFRESH) {
int i;
Giant const-correctness patch of doom! Having found a lot of unfixed constness issues in recent development, I thought perhaps it was time to get proactive, so I compiled the whole codebase with -Wwrite-strings. That turned up a huge load of const problems, which I've fixed in this commit: the Unix build now goes cleanly through with -Wwrite-strings, and the Windows build is as close as I could get it (there are some lingering issues due to occasional Windows API functions like AcquireCredentialsHandle not having the right constness). Notable fallout beyond the purely mechanical changing of types: - the stuff saved by cmdline_save_param() is now explicitly dupstr()ed, and freed in cmdline_run_saved. - I couldn't make both string arguments to cmdline_process_param() const, because it intentionally writes to one of them in the case where it's the argument to -pw (in the vain hope of being at least slightly friendly to 'ps'), so elsewhere I had to temporarily dupstr() something for the sake of passing it to that function - I had to invent a silly parallel version of const_cmp() so I could pass const string literals in to lookup functions. - stripslashes() in pscp.c and psftp.c has the annoying strchr nature
2015-05-15 13:15:42 +03:00
static const struct { const char *s; int k; } kexes[] = {
Add a preference list for SSH-2 key exchange algorithms, on a new "Kex" panel (which will gain more content anon). Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never did find a way of automatically detecting this alleged server bug, and in any case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW). Also generalise askcipher() to a new askalg() (thus touching all the front-ends). I've made some attempt to document what SSH key exchange is and why you care, but it could use some review for clarity (and outright lies). [originally from svn r5022]
2004-12-23 05:24:07 +03:00
{ "Diffie-Hellman group 1", KEX_DHGROUP1 },
{ "Diffie-Hellman group 14", KEX_DHGROUP14 },
{ "Diffie-Hellman group exchange", KEX_DHGEX },
Add support for RFC 4432 RSA key exchange, the patch for which has been lying around in my home directory for _years_. [originally from svn r7496]
2007-05-01 02:09:26 +04:00
{ "RSA-based key exchange", KEX_RSA },
Elliptic-curve cryptography support. This provides support for ECDSA public keys, for both hosts and users, and also ECDH key exchange. Supported curves are currently just the three NIST curves required by RFC 5656.
2014-11-01 12:45:20 +03:00
{ "ECDH key exchange", KEX_ECDH },
Add a preference list for SSH-2 key exchange algorithms, on a new "Kex" panel (which will gain more content anon). Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never did find a way of automatically detecting this alleged server bug, and in any case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW). Also generalise askcipher() to a new askalg() (thus touching all the front-ends). I've made some attempt to document what SSH key exchange is and why you care, but it could use some review for clarity (and outright lies). [originally from svn r5022]
2004-12-23 05:24:07 +03:00
{ "-- warn below here --", KEX_WARN }
};
/* Set up the "kex preference" box. */
/* (kexlist assumed to contain all algorithms) */
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
Revert KEX_MAX_CONF system from the GSS kex patch. Commit d515e4f1a went through a lot of very different shapes before it was finally pushed. In some of them, GSS kex had its own value in the kex enumeration, but it was used in ssh.c but not in config.c (because, as in the final version, it wasn't configured by the same drag-list system as the rest of them). So we had to distinguish the set of key exchange ids known to the program as a whole from the set controllable in the configuration. In the final version, GSS kex ended up even more separated from the kex enumeration than that: the enum value KEX_GSS_SHA1_K5 isn't used at all. Instead, GSS key exchange appears in the list at the point of translation from the list of enum values into the list of pointers to data structures full of kex methods. But after all the changes, everyone involved forgot to revert the part of the patch which split KEX_MAX in two and introduced the pointless value KEX_GSS_SHA1_K5! Better late than never: I'm reverting it now, to avoid confusion, and because I don't have any reason to think the distinction will be useful for any other purpose.
2018-05-01 09:41:01 +03:00
for (i = 0; i < KEX_MAX; i++) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
int k = conf_get_int_int(conf, CONF_ssh_kexlist, i);
Add a preference list for SSH-2 key exchange algorithms, on a new "Kex" panel (which will gain more content anon). Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never did find a way of automatically detecting this alleged server bug, and in any case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW). Also generalise askcipher() to a new askalg() (thus touching all the front-ends). I've made some attempt to document what SSH key exchange is and why you care, but it could use some review for clarity (and outright lies). [originally from svn r5022]
2004-12-23 05:24:07 +03:00
int j;
Giant const-correctness patch of doom! Having found a lot of unfixed constness issues in recent development, I thought perhaps it was time to get proactive, so I compiled the whole codebase with -Wwrite-strings. That turned up a huge load of const problems, which I've fixed in this commit: the Unix build now goes cleanly through with -Wwrite-strings, and the Windows build is as close as I could get it (there are some lingering issues due to occasional Windows API functions like AcquireCredentialsHandle not having the right constness). Notable fallout beyond the purely mechanical changing of types: - the stuff saved by cmdline_save_param() is now explicitly dupstr()ed, and freed in cmdline_run_saved. - I couldn't make both string arguments to cmdline_process_param() const, because it intentionally writes to one of them in the case where it's the argument to -pw (in the vain hope of being at least slightly friendly to 'ps'), so elsewhere I had to temporarily dupstr() something for the sake of passing it to that function - I had to invent a silly parallel version of const_cmp() so I could pass const string literals in to lookup functions. - stripslashes() in pscp.c and psftp.c has the annoying strchr nature
2015-05-15 13:15:42 +03:00
const char *kstr = NULL;
Add a preference list for SSH-2 key exchange algorithms, on a new "Kex" panel (which will gain more content anon). Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never did find a way of automatically detecting this alleged server bug, and in any case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW). Also generalise askcipher() to a new askalg() (thus touching all the front-ends). I've made some attempt to document what SSH key exchange is and why you care, but it could use some review for clarity (and outright lies). [originally from svn r5022]
2004-12-23 05:24:07 +03:00
for (j = 0; j < (sizeof kexes) / (sizeof kexes[0]); j++) {
if (kexes[j].k == k) {
kstr = kexes[j].s;
break;
}
}
dlg_listbox_addwithid(ctrl, dlg, kstr, k);
}
dlg_update_done(ctrl, dlg);
} else if (event == EVENT_VALCHANGE) {
int i;
/* Update array to match the list box. */
Revert KEX_MAX_CONF system from the GSS kex patch. Commit d515e4f1a went through a lot of very different shapes before it was finally pushed. In some of them, GSS kex had its own value in the kex enumeration, but it was used in ssh.c but not in config.c (because, as in the final version, it wasn't configured by the same drag-list system as the rest of them). So we had to distinguish the set of key exchange ids known to the program as a whole from the set controllable in the configuration. In the final version, GSS kex ended up even more separated from the kex enumeration than that: the enum value KEX_GSS_SHA1_K5 isn't used at all. Instead, GSS key exchange appears in the list at the point of translation from the list of enum values into the list of pointers to data structures full of kex methods. But after all the changes, everyone involved forgot to revert the part of the patch which split KEX_MAX in two and introduced the pointless value KEX_GSS_SHA1_K5! Better late than never: I'm reverting it now, to avoid confusion, and because I don't have any reason to think the distinction will be useful for any other purpose.
2018-05-01 09:41:01 +03:00
for (i=0; i < KEX_MAX; i++)
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_int_int(conf, CONF_ssh_kexlist, i,
dlg_listbox_getid(ctrl, dlg, i));
Add a preference list for SSH-2 key exchange algorithms, on a new "Kex" panel (which will gain more content anon). Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never did find a way of automatically detecting this alleged server bug, and in any case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW). Also generalise askcipher() to a new askalg() (thus touching all the front-ends). I've made some attempt to document what SSH key exchange is and why you care, but it could use some review for clarity (and outright lies). [originally from svn r5022]
2004-12-23 05:24:07 +03:00
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void hklist_handler(union control *ctrl, dlgparam *dlg,
Configurable preference list for SSH host key types. Now we actually have enough of them to worry about, and especially since some of the types we support are approved by organisations that people might make their own decisions about whether to trust, it seems worth having a config list for host keys the same way we have one for kex types and ciphers. To make room for this, I've created an SSH > Host Keys config panel, and moved the existing host-key related configuration (manually specified fingerprints) into there from the Kex panel.
2016-03-25 18:56:31 +03:00
void *data, int event)
{
Conf *conf = (Conf *)data;
if (event == EVENT_REFRESH) {
int i;
static const struct { const char *s; int k; } hks[] = {
{ "Ed25519", HK_ED25519 },
{ "ECDSA", HK_ECDSA },
{ "DSA", HK_DSA },
{ "RSA", HK_RSA },
{ "-- warn below here --", HK_WARN }
};
/* Set up the "host key preference" box. */
/* (hklist assumed to contain all algorithms) */
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
for (i = 0; i < HK_MAX; i++) {
int k = conf_get_int_int(conf, CONF_ssh_hklist, i);
int j;
const char *kstr = NULL;
for (j = 0; j < lenof(hks); j++) {
if (hks[j].k == k) {
kstr = hks[j].s;
break;
}
}
dlg_listbox_addwithid(ctrl, dlg, kstr, k);
}
dlg_update_done(ctrl, dlg);
} else if (event == EVENT_VALCHANGE) {
int i;
/* Update array to match the list box. */
for (i=0; i < HK_MAX; i++)
conf_set_int_int(conf, CONF_ssh_hklist, i,
dlg_listbox_getid(ctrl, dlg, i));
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void printerbox_handler(union control *ctrl, dlgparam *dlg,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
if (event == EVENT_REFRESH) {
int nprinters, i;
printer_enum *pe;
Giant const-correctness patch of doom! Having found a lot of unfixed constness issues in recent development, I thought perhaps it was time to get proactive, so I compiled the whole codebase with -Wwrite-strings. That turned up a huge load of const problems, which I've fixed in this commit: the Unix build now goes cleanly through with -Wwrite-strings, and the Windows build is as close as I could get it (there are some lingering issues due to occasional Windows API functions like AcquireCredentialsHandle not having the right constness). Notable fallout beyond the purely mechanical changing of types: - the stuff saved by cmdline_save_param() is now explicitly dupstr()ed, and freed in cmdline_run_saved. - I couldn't make both string arguments to cmdline_process_param() const, because it intentionally writes to one of them in the case where it's the argument to -pw (in the vain hope of being at least slightly friendly to 'ps'), so elsewhere I had to temporarily dupstr() something for the sake of passing it to that function - I had to invent a silly parallel version of const_cmp() so I could pass const string literals in to lookup functions. - stripslashes() in pscp.c and psftp.c has the annoying strchr nature
2015-05-15 13:15:42 +03:00
const char *printer;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_update_start(ctrl, dlg);
Unix can't sensibly enumerate printers (since they're defined as being lpr commands), so the Unix config box now replaces the printer combo box with an ordinary edit box. [originally from svn r3063]
2003-04-05 20:12:52 +04:00
/*
* Some backends may wish to disable the drop-down list on
* this edit box. Be prepared for this.
*/
if (ctrl->editbox.has_list) {
dlg_listbox_clear(ctrl, dlg);
dlg_listbox_add(ctrl, dlg, PRINTER_DISABLED_STRING);
pe = printer_start_enum(&nprinters);
for (i = 0; i < nprinters; i++)
dlg_listbox_add(ctrl, dlg, printer_get_name(pe, i));
printer_finish_enum(pe);
}
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
printer = conf_get_str(conf, CONF_printer);
if (!printer)
printer = PRINTER_DISABLED_STRING;
dlg_editbox_set(ctrl, dlg, printer);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_update_done(ctrl, dlg);
} else if (event == EVENT_VALCHANGE) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *printer = dlg_editbox_get(ctrl, dlg);
if (!strcmp(printer, PRINTER_DISABLED_STRING))
printer[0] = '\0';
conf_set_str(conf, CONF_printer, printer);
sfree(printer);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void codepage_handler(union control *ctrl, dlgparam *dlg,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
if (event == EVENT_REFRESH) {
int i;
Clearing and refilling the code-pages list box can cause a re-entrant call to its handler in config.c, which destroys the previous value in cfg->line_codepage. Therefore, preserve the right value in an automatic variable until all the re-entrant calls have finished. [originally from svn r8592]
2009-06-10 21:42:15 +04:00
const char *cp, *thiscp;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_update_start(ctrl, dlg);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
thiscp = cp_name(decode_codepage(conf_get_str(conf,
CONF_line_codepage)));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_listbox_clear(ctrl, dlg);
for (i = 0; (cp = cp_enumerate(i)) != NULL; i++)
dlg_listbox_add(ctrl, dlg, cp);
Clearing and refilling the code-pages list box can cause a re-entrant call to its handler in config.c, which destroys the previous value in cfg->line_codepage. Therefore, preserve the right value in an automatic variable until all the re-entrant calls have finished. [originally from svn r8592]
2009-06-10 21:42:15 +04:00
dlg_editbox_set(ctrl, dlg, thiscp);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_str(conf, CONF_line_codepage, thiscp);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_update_done(ctrl, dlg);
} else if (event == EVENT_VALCHANGE) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *codepage = dlg_editbox_get(ctrl, dlg);
conf_set_str(conf, CONF_line_codepage,
cp_name(decode_codepage(codepage)));
sfree(codepage);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void sshbug_handler(union control *ctrl, dlgparam *dlg,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
if (event == EVENT_REFRESH) {
Fix an embarrassing mistake in config box handling which was causing changes to any SSH bug config option to be lost when the config box switched to a different panel, at least on GTK. [originally from svn r9591]
2012-07-28 20:53:09 +04:00
/*
* We must fetch the previously configured value from the Conf
* before we start modifying the drop-down list, otherwise the
* spurious SELCHANGE we trigger in the process will overwrite
* the value we wanted to keep.
*/
int oldconf = conf_get_int(conf, ctrl->listbox.context.i);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
Rename dlg_listbox_addwithindex() to dlg_listbox_addwithid(), since the old name was, not to put too fine a point on it, wrong. [originally from svn r2997]
2003-03-26 02:45:56 +03:00
dlg_listbox_addwithid(ctrl, dlg, "Auto", AUTO);
dlg_listbox_addwithid(ctrl, dlg, "Off", FORCE_OFF);
dlg_listbox_addwithid(ctrl, dlg, "On", FORCE_ON);
Fix an embarrassing mistake in config box handling which was causing changes to any SSH bug config option to be lost when the config box switched to a different panel, at least on GTK. [originally from svn r9591]
2012-07-28 20:53:09 +04:00
switch (oldconf) {
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
case AUTO: dlg_listbox_select(ctrl, dlg, 0); break;
case FORCE_OFF: dlg_listbox_select(ctrl, dlg, 1); break;
case FORCE_ON: dlg_listbox_select(ctrl, dlg, 2); break;
}
dlg_update_done(ctrl, dlg);
} else if (event == EVENT_SELCHANGE) {
int i = dlg_listbox_index(ctrl, dlg);
if (i < 0)
i = AUTO;
else
i = dlg_listbox_getid(ctrl, dlg, i);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_int(conf, ctrl->listbox.context.i, i);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}
struct sessionsaver_data {
union control *editbox, *listbox, *loadbutton, *savebutton, *delbutton;
union control *okbutton, *cancelbutton;
If a new session was saved from Change Settings, a side-effect on Windows was that the global `sesslist' got out of sync with the saved-sessions submenu, causing the latter to launch the wrong sessions. Also, Change Settings wasn't getting a fresh session list, so if the set of sessions had changed since session startup it wouldn't reflect that (at least until a session was saved). Fixed (on all platforms). Therefore, since the global sesslist didn't seem to be useful, I've got rid of it; config.c creates one as needed, as do the frontends. (Not tried compiling Mac changes.) Also, we now build the saved-sessions submenu on demand on Windows and Unix. (This should probably also be done on the Mac.) [originally from svn r5609]
2005-04-07 05:36:28 +04:00
struct sesslist sesslist;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
bool midsession;
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
char *savedsession; /* the current contents of ssd->editbox */
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
};
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
static void sessionsaver_data_free(void *ssdv)
{
struct sessionsaver_data *ssd = (struct sessionsaver_data *)ssdv;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
get_sesslist(&ssd->sesslist, false);
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
sfree(ssd->savedsession);
sfree(ssd);
}
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* Helper function to load the session selected in the list box, if
* any, as this is done in more than one place below. Returns 0 for
* failure.
*/
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
static bool load_selected_session(
struct sessionsaver_data *ssd,
dlgparam *dlg, Conf *conf, bool *maybe_launch)
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
{
int i = dlg_listbox_index(ssd->listbox, dlg);
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
bool isdef;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
if (i < 0) {
dlg_beep(dlg);
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
return false;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
If a new session was saved from Change Settings, a side-effect on Windows was that the global `sesslist' got out of sync with the saved-sessions submenu, causing the latter to launch the wrong sessions. Also, Change Settings wasn't getting a fresh session list, so if the set of sessions had changed since session startup it wouldn't reflect that (at least until a session was saved). Fixed (on all platforms). Therefore, since the global sesslist didn't seem to be useful, I've got rid of it; config.c creates one as needed, as do the frontends. (Not tried compiling Mac changes.) Also, we now build the saved-sessions submenu on demand on Windows and Unix. (This should probably also be done on the Mac.) [originally from svn r5609]
2005-04-07 05:36:28 +04:00
isdef = !strcmp(ssd->sesslist.sessions[i], "Default Settings");
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
load_settings(ssd->sesslist.sessions[i], conf);
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
sfree(ssd->savedsession);
ssd->savedsession = dupstr(isdef ? "" : ssd->sesslist.sessions[i]);
if (maybe_launch)
*maybe_launch = !isdef;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_refresh(NULL, dlg);
/* Restore the selection, which might have been clobbered by
* changing the value of the edit box. */
dlg_listbox_select(ssd->listbox, dlg, i);
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
return true;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void sessionsaver_handler(union control *ctrl, dlgparam *dlg,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
struct sessionsaver_data *ssd =
(struct sessionsaver_data *)ctrl->generic.context.p;
if (event == EVENT_REFRESH) {
if (ctrl == ssd->editbox) {
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
dlg_editbox_set(ctrl, dlg, ssd->savedsession);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
} else if (ctrl == ssd->listbox) {
int i;
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
If a new session was saved from Change Settings, a side-effect on Windows was that the global `sesslist' got out of sync with the saved-sessions submenu, causing the latter to launch the wrong sessions. Also, Change Settings wasn't getting a fresh session list, so if the set of sessions had changed since session startup it wouldn't reflect that (at least until a session was saved). Fixed (on all platforms). Therefore, since the global sesslist didn't seem to be useful, I've got rid of it; config.c creates one as needed, as do the frontends. (Not tried compiling Mac changes.) Also, we now build the saved-sessions submenu on demand on Windows and Unix. (This should probably also be done on the Mac.) [originally from svn r5609]
2005-04-07 05:36:28 +04:00
for (i = 0; i < ssd->sesslist.nsessions; i++)
dlg_listbox_add(ctrl, dlg, ssd->sesslist.sessions[i]);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_update_done(ctrl, dlg);
}
} else if (event == EVENT_VALCHANGE) {
Platform-independent support for zooming around session list by typing in the session name box. Thwarted on Unix by GTK not automatically scrolling the listbox to the selected item, but we can fix that in the platform-specific side later. [originally from svn r6337]
2005-09-21 18:53:32 +04:00
int top, bottom, halfway, i;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
if (ctrl == ssd->editbox) {
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
sfree(ssd->savedsession);
ssd->savedsession = dlg_editbox_get(ctrl, dlg);
Platform-independent support for zooming around session list by typing in the session name box. Thwarted on Unix by GTK not automatically scrolling the listbox to the selected item, but we can fix that in the platform-specific side later. [originally from svn r6337]
2005-09-21 18:53:32 +04:00
top = ssd->sesslist.nsessions;
bottom = -1;
while (top-bottom > 1) {
halfway = (top+bottom)/2;
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
i = strcmp(ssd->savedsession, ssd->sesslist.sessions[halfway]);
Platform-independent support for zooming around session list by typing in the session name box. Thwarted on Unix by GTK not automatically scrolling the listbox to the selected item, but we can fix that in the platform-specific side later. [originally from svn r6337]
2005-09-21 18:53:32 +04:00
if (i <= 0 ) {
top = halfway;
} else {
bottom = halfway;
}
}
if (top == ssd->sesslist.nsessions) {
top -= 1;
}
dlg_listbox_select(ssd->listbox, dlg, top);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
} else if (event == EVENT_ACTION) {
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
bool mbl = false;
Remove "Load" button in mid-session configuration dialog, as it allows the user to manipulate settings they can't see so could lead to confusion. (Also remove "Delete" button for some sort of UI consistency even though it's harmless.) Also conditionalise other aspects of sessionsaver_handler() that don't make sense mid-session. [originally from svn r5043]
2004-12-30 13:58:28 +03:00
if (!ssd->midsession &&
(ctrl == ssd->listbox ||
(ssd->loadbutton && ctrl == ssd->loadbutton))) {
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* The user has double-clicked a session, or hit Load.
* We must load the selected session, and then
* terminate the configuration dialog _if_ there was a
* double-click on the list box _and_ that session
* contains a hostname.
*/
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
if (load_selected_session(ssd, dlg, conf, &mbl) &&
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
(mbl && ctrl == ssd->listbox && conf_launchable(conf))) {
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_end(dlg, 1); /* it's all over, and succeeded */
}
} else if (ctrl == ssd->savebutton) {
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
bool isdef = !strcmp(ssd->savedsession, "Default Settings");
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
if (!ssd->savedsession[0]) {
Fix a couple of stupid typos in the session-saving code. [originally from svn r2916]
2003-03-06 21:49:05 +03:00
int i = dlg_listbox_index(ssd->listbox, dlg);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
if (i < 0) {
dlg_beep(dlg);
return;
}
If a new session was saved from Change Settings, a side-effect on Windows was that the global `sesslist' got out of sync with the saved-sessions submenu, causing the latter to launch the wrong sessions. Also, Change Settings wasn't getting a fresh session list, so if the set of sessions had changed since session startup it wouldn't reflect that (at least until a session was saved). Fixed (on all platforms). Therefore, since the global sesslist didn't seem to be useful, I've got rid of it; config.c creates one as needed, as do the frontends. (Not tried compiling Mac changes.) Also, we now build the saved-sessions submenu on demand on Windows and Unix. (This should probably also be done on the Mac.) [originally from svn r5609]
2005-04-07 05:36:28 +04:00
isdef = !strcmp(ssd->sesslist.sessions[i], "Default Settings");
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
sfree(ssd->savedsession);
ssd->savedsession = dupstr(isdef ? "" :
ssd->sesslist.sessions[i]);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
Various error-handling fixes, mostly in Unix PuTTY but one (failure to save a session) crosses over into the platform-independent side. [originally from svn r3041]
2003-04-01 22:10:25 +04:00
{
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
char *errmsg = save_settings(ssd->savedsession, conf);
Various error-handling fixes, mostly in Unix PuTTY but one (failure to save a session) crosses over into the platform-independent side. [originally from svn r3041]
2003-04-01 22:10:25 +04:00
if (errmsg) {
dlg_error_msg(dlg, errmsg);
sfree(errmsg);
}
}
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
get_sesslist(&ssd->sesslist, false);
get_sesslist(&ssd->sesslist, true);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_refresh(ssd->editbox, dlg);
dlg_refresh(ssd->listbox, dlg);
Remove "Load" button in mid-session configuration dialog, as it allows the user to manipulate settings they can't see so could lead to confusion. (Also remove "Delete" button for some sort of UI consistency even though it's harmless.) Also conditionalise other aspects of sessionsaver_handler() that don't make sense mid-session. [originally from svn r5043]
2004-12-30 13:58:28 +03:00
} else if (!ssd->midsession &&
ssd->delbutton && ctrl == ssd->delbutton) {
Repair the delete-saved-session button (trivial braino). [originally from svn r2911]
2003-03-06 15:52:36 +03:00
int i = dlg_listbox_index(ssd->listbox, dlg);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
if (i <= 0) {
dlg_beep(dlg);
} else {
If a new session was saved from Change Settings, a side-effect on Windows was that the global `sesslist' got out of sync with the saved-sessions submenu, causing the latter to launch the wrong sessions. Also, Change Settings wasn't getting a fresh session list, so if the set of sessions had changed since session startup it wouldn't reflect that (at least until a session was saved). Fixed (on all platforms). Therefore, since the global sesslist didn't seem to be useful, I've got rid of it; config.c creates one as needed, as do the frontends. (Not tried compiling Mac changes.) Also, we now build the saved-sessions submenu on demand on Windows and Unix. (This should probably also be done on the Mac.) [originally from svn r5609]
2005-04-07 05:36:28 +04:00
del_settings(ssd->sesslist.sessions[i]);
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
get_sesslist(&ssd->sesslist, false);
get_sesslist(&ssd->sesslist, true);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_refresh(ssd->listbox, dlg);
}
} else if (ctrl == ssd->okbutton) {
Remove "Load" button in mid-session configuration dialog, as it allows the user to manipulate settings they can't see so could lead to confusion. (Also remove "Delete" button for some sort of UI consistency even though it's harmless.) Also conditionalise other aspects of sessionsaver_handler() that don't make sense mid-session. [originally from svn r5043]
2004-12-30 13:58:28 +03:00
if (ssd->midsession) {
Implemented Change Settings under Unix. We are gradually getting there. [originally from svn r3092]
2003-04-10 22:00:50 +04:00
/* In a mid-session Change Settings, Apply is always OK. */
dlg_end(dlg, 1);
return;
}
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* Annoying special case. If the `Open' button is
* pressed while no host name is currently set, _and_
* the session list previously had the focus, _and_
* there was a session selected in that which had a
* valid host name in it, then load it and go.
*/
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
if (dlg_last_focused(ctrl, dlg) == ssd->listbox &&
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
!conf_launchable(conf)) {
Conf *conf2 = conf_new();
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
bool mbl = false;
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
if (!load_selected_session(ssd, dlg, conf2, &mbl)) {
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_beep(dlg);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_free(conf2);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
return;
}
/* If at this point we have a valid session, go! */
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
if (mbl && conf_launchable(conf2)) {
conf_copy_into(conf, conf2);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_end(dlg, 1);
} else
dlg_beep(dlg);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_free(conf2);
Miloslav Cempirek Ing points out that we should return from sessionsaver_handler after processing a one-click saved session launch, to protect against accidentally calling dlg_end twice on the same dialog. [originally from svn r4779]
2004-11-15 14:10:36 +03:00
return;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
/*
* Otherwise, do the normal thing: if we have a valid
* session, get going.
*/
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
if (conf_launchable(conf)) {
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_end(dlg, 1);
} else
dlg_beep(dlg);
} else if (ctrl == ssd->cancelbutton) {
dlg_end(dlg, 0);
}
}
}
struct charclass_data {
union control *listbox, *editbox, *button;
};
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void charclass_handler(union control *ctrl, dlgparam *dlg,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
struct charclass_data *ccd =
(struct charclass_data *)ctrl->generic.context.p;
if (event == EVENT_REFRESH) {
if (ctrl == ccd->listbox) {
int i;
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
for (i = 0; i < 128; i++) {
char str[100];
sprintf(str, "%d\t(0x%02X)\t%c\t%d", i, i,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
(i >= 0x21 && i != 0x7F) ? i : ' ',
conf_get_int_int(conf, CONF_wordness, i));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_listbox_add(ctrl, dlg, str);
}
dlg_update_done(ctrl, dlg);
}
} else if (event == EVENT_ACTION) {
if (ctrl == ccd->button) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *str;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
int i, n;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
str = dlg_editbox_get(ccd->editbox, dlg);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
n = atoi(str);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
sfree(str);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
for (i = 0; i < 128; i++) {
if (dlg_listbox_issel(ccd->listbox, dlg, i))
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_int_int(conf, CONF_wordness, i, n);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
dlg_refresh(ccd->listbox, dlg);
}
}
}
struct colour_data {
The GTK colour selector does not provide full 8-bit resolution in the RGB values (it deals in floats with 2 d.p. instead). Hence I've replaced the static RGB text item in the Colours panel with three little edit boxes, so that a user can type in exact 0-255 RGB values if necessary. This should have the additional advantage of being quicker than faffing with the colour selector if you already know exactly what you want and are in a hurry! [originally from svn r2978]
2003-03-22 14:07:59 +03:00
union control *listbox, *redit, *gedit, *bedit, *button;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
};
static const char *const colours[] = {
"Default Foreground", "Default Bold Foreground",
"Default Background", "Default Bold Background",
"Cursor Text", "Cursor Colour",
"ANSI Black", "ANSI Black Bold",
"ANSI Red", "ANSI Red Bold",
"ANSI Green", "ANSI Green Bold",
"ANSI Yellow", "ANSI Yellow Bold",
"ANSI Blue", "ANSI Blue Bold",
"ANSI Magenta", "ANSI Magenta Bold",
"ANSI Cyan", "ANSI Cyan Bold",
"ANSI White", "ANSI White Bold"
};
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void colour_handler(union control *ctrl, dlgparam *dlg,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
struct colour_data *cd =
(struct colour_data *)ctrl->generic.context.p;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
bool update = false, clear = false;
int r, g, b;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
if (event == EVENT_REFRESH) {
if (ctrl == cd->listbox) {
int i;
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
for (i = 0; i < lenof(colours); i++)
dlg_listbox_add(ctrl, dlg, colours[i]);
dlg_update_done(ctrl, dlg);
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
clear = true;
update = true;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
} else if (event == EVENT_SELCHANGE) {
if (ctrl == cd->listbox) {
/* The user has selected a colour. Update the RGB text. */
int i = dlg_listbox_index(ctrl, dlg);
if (i < 0) {
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
clear = true;
Exorcise beeps from the Colours pane in Gtk. The colour list box beeped at the user whenever it found that something other than exactly one colour was selected. This seems to happen implicitly in Gtk when the pane is changed. In Gtk1, this gave you a beep whenever you left the Colours dialog after having selected a colour from the list; in Gtk2, you additionally got a beep _every_ time you subsequently re-entered the Colours dialog (for reasons I haven't investigated). Windows was unaffected. Also, in Gtk (unlike Windows), it's possible for the user to go back to the state where no items in the list box are selected at all. For these reasons, stop beeping at the user, and instead blank the RGB edit boxes as a hint that edits to them would be futile. (Really we should be disabling them entirely, but the cross-platform edit controls aren't up to that yet.) [originally from svn r8074]
2008-06-15 16:39:09 +04:00
} else {
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
clear = false;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
r = conf_get_int_int(conf, CONF_colours, i*3+0);
Fallout from the big revamp in r9214: colour handling was going a bit wonky because I'd used the subkey for the red component in four places where I should have used the green/blue subkeys instead. Thanks to Martin Kletzander for spotting it. [originally from svn r9449] [r9214 == a1f3b7a358adaa7c2a98359cd0373aa823eeb14b]
2012-04-08 13:42:58 +04:00
g = conf_get_int_int(conf, CONF_colours, i*3+1);
b = conf_get_int_int(conf, CONF_colours, i*3+2);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
update = true;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
The GTK colour selector does not provide full 8-bit resolution in the RGB values (it deals in floats with 2 d.p. instead). Hence I've replaced the static RGB text item in the Colours panel with three little edit boxes, so that a user can type in exact 0-255 RGB values if necessary. This should have the additional advantage of being quicker than faffing with the colour selector if you already know exactly what you want and are in a hurry! [originally from svn r2978]
2003-03-22 14:07:59 +03:00
} else if (event == EVENT_VALCHANGE) {
if (ctrl == cd->redit || ctrl == cd->gedit || ctrl == cd->bedit) {
/* The user has changed the colour using the edit boxes. */
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *str;
The GTK colour selector does not provide full 8-bit resolution in the RGB values (it deals in floats with 2 d.p. instead). Hence I've replaced the static RGB text item in the Colours panel with three little edit boxes, so that a user can type in exact 0-255 RGB values if necessary. This should have the additional advantage of being quicker than faffing with the colour selector if you already know exactly what you want and are in a hurry! [originally from svn r2978]
2003-03-22 14:07:59 +03:00
int i, cval;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
str = dlg_editbox_get(ctrl, dlg);
cval = atoi(str);
sfree(str);
In the config dialog, clip RGB values to [0..255] rather than reducing them mod 256. Document that the RGB values can be edited, and their range. [originally from svn r6734]
2006-06-21 01:10:33 +04:00
if (cval > 255) cval = 255;
if (cval < 0) cval = 0;
The GTK colour selector does not provide full 8-bit resolution in the RGB values (it deals in floats with 2 d.p. instead). Hence I've replaced the static RGB text item in the Colours panel with three little edit boxes, so that a user can type in exact 0-255 RGB values if necessary. This should have the additional advantage of being quicker than faffing with the colour selector if you already know exactly what you want and are in a hurry! [originally from svn r2978]
2003-03-22 14:07:59 +03:00
i = dlg_listbox_index(cd->listbox, dlg);
if (i >= 0) {
if (ctrl == cd->redit)
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_int_int(conf, CONF_colours, i*3+0, cval);
The GTK colour selector does not provide full 8-bit resolution in the RGB values (it deals in floats with 2 d.p. instead). Hence I've replaced the static RGB text item in the Colours panel with three little edit boxes, so that a user can type in exact 0-255 RGB values if necessary. This should have the additional advantage of being quicker than faffing with the colour selector if you already know exactly what you want and are in a hurry! [originally from svn r2978]
2003-03-22 14:07:59 +03:00
else if (ctrl == cd->gedit)
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_int_int(conf, CONF_colours, i*3+1, cval);
The GTK colour selector does not provide full 8-bit resolution in the RGB values (it deals in floats with 2 d.p. instead). Hence I've replaced the static RGB text item in the Colours panel with three little edit boxes, so that a user can type in exact 0-255 RGB values if necessary. This should have the additional advantage of being quicker than faffing with the colour selector if you already know exactly what you want and are in a hurry! [originally from svn r2978]
2003-03-22 14:07:59 +03:00
else if (ctrl == cd->bedit)
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_int_int(conf, CONF_colours, i*3+2, cval);
The GTK colour selector does not provide full 8-bit resolution in the RGB values (it deals in floats with 2 d.p. instead). Hence I've replaced the static RGB text item in the Colours panel with three little edit boxes, so that a user can type in exact 0-255 RGB values if necessary. This should have the additional advantage of being quicker than faffing with the colour selector if you already know exactly what you want and are in a hurry! [originally from svn r2978]
2003-03-22 14:07:59 +03:00
}
}
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
} else if (event == EVENT_ACTION) {
if (ctrl == cd->button) {
int i = dlg_listbox_index(cd->listbox, dlg);
if (i < 0) {
dlg_beep(dlg);
return;
}
/*
* Start a colour selector, which will send us an
* EVENT_CALLBACK when it's finished and allow us to
* pick up the results.
*/
dlg_coloursel_start(ctrl, dlg,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_get_int_int(conf, CONF_colours, i*3+0),
conf_get_int_int(conf, CONF_colours, i*3+1),
conf_get_int_int(conf, CONF_colours, i*3+2));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
} else if (event == EVENT_CALLBACK) {
if (ctrl == cd->button) {
int i = dlg_listbox_index(cd->listbox, dlg);
/*
* Collect the results of the colour selector. Will
* return nonzero on success, or zero if the colour
* selector did nothing (user hit Cancel, for example).
*/
if (dlg_coloursel_results(ctrl, dlg, &r, &g, &b)) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_int_int(conf, CONF_colours, i*3+0, r);
Fallout from the big revamp in r9214: colour handling was going a bit wonky because I'd used the subkey for the red component in four places where I should have used the green/blue subkeys instead. Thanks to Martin Kletzander for spotting it. [originally from svn r9449] [r9214 == a1f3b7a358adaa7c2a98359cd0373aa823eeb14b]
2012-04-08 13:42:58 +04:00
conf_set_int_int(conf, CONF_colours, i*3+1, g);
conf_set_int_int(conf, CONF_colours, i*3+2, b);
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
clear = false;
update = true;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}
}
if (update) {
Exorcise beeps from the Colours pane in Gtk. The colour list box beeped at the user whenever it found that something other than exactly one colour was selected. This seems to happen implicitly in Gtk when the pane is changed. In Gtk1, this gave you a beep whenever you left the Colours dialog after having selected a colour from the list; in Gtk2, you additionally got a beep _every_ time you subsequently re-entered the Colours dialog (for reasons I haven't investigated). Windows was unaffected. Also, in Gtk (unlike Windows), it's possible for the user to go back to the state where no items in the list box are selected at all. For these reasons, stop beeping at the user, and instead blank the RGB edit boxes as a hint that edits to them would be futile. (Really we should be disabling them entirely, but the cross-platform edit controls aren't up to that yet.) [originally from svn r8074]
2008-06-15 16:39:09 +04:00
if (clear) {
dlg_editbox_set(cd->redit, dlg, "");
dlg_editbox_set(cd->gedit, dlg, "");
dlg_editbox_set(cd->bedit, dlg, "");
} else {
char buf[40];
sprintf(buf, "%d", r); dlg_editbox_set(cd->redit, dlg, buf);
sprintf(buf, "%d", g); dlg_editbox_set(cd->gedit, dlg, buf);
sprintf(buf, "%d", b); dlg_editbox_set(cd->bedit, dlg, buf);
}
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
struct ttymodes_data {
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
union control *valradio, *valbox, *setbutton, *listbox;
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
};
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void ttymodes_handler(union control *ctrl, dlgparam *dlg,
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
struct ttymodes_data *td =
(struct ttymodes_data *)ctrl->generic.context.p;
if (event == EVENT_REFRESH) {
if (ctrl == td->listbox) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *key, *val;
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
for (val = conf_get_str_strs(conf, CONF_ttymodes, NULL, &key);
val != NULL;
val = conf_get_str_strs(conf, CONF_ttymodes, key, &key)) {
char *disp = dupprintf("%s\t%s", key,
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
(val[0] == 'A') ? "(auto)" :
((val[0] == 'N') ? "(don't send)"
: val+1));
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
dlg_listbox_add(ctrl, dlg, disp);
sfree(disp);
}
dlg_update_done(ctrl, dlg);
} else if (ctrl == td->valradio) {
dlg_radiobutton_set(ctrl, dlg, 0);
}
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
} else if (event == EVENT_SELCHANGE) {
if (ctrl == td->listbox) {
int ind = dlg_listbox_index(td->listbox, dlg);
char *val;
if (ind < 0) {
return; /* no item selected */
}
val = conf_get_str_str(conf, CONF_ttymodes,
conf_get_str_nthstrkey(conf, CONF_ttymodes,
ind));
assert(val != NULL);
/* Do this first to defuse side-effects on radio buttons: */
dlg_editbox_set(td->valbox, dlg, val+1);
dlg_radiobutton_set(td->valradio, dlg,
val[0] == 'A' ? 0 : (val[0] == 'N' ? 1 : 2));
}
} else if (event == EVENT_VALCHANGE) {
if (ctrl == td->valbox) {
/* If they're editing the text box, we assume they want its
* value to be used. */
dlg_radiobutton_set(td->valradio, dlg, 2);
}
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
} else if (event == EVENT_ACTION) {
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
if (ctrl == td->setbutton) {
int ind = dlg_listbox_index(td->listbox, dlg);
const char *key;
char *str, *val;
char type;
{
Fixes spotted by Coverity. A lenof() being applied to a non-array, a couple of missing frees on an error path, and a case in pfd_receive() where we could have gone round a loop again after freeing the port forwarding structure it was working on.
2017-06-20 23:17:43 +03:00
const char types[] = {'A', 'N', 'V'};
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
int button = dlg_radiobutton_get(td->valradio, dlg);
assert(button >= 0 && button < lenof(types));
type = types[button];
}
/* Construct new entry */
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
if (ind >= 0) {
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
key = conf_get_str_nthstrkey(conf, CONF_ttymodes, ind);
str = (type == 'V' ? dlg_editbox_get(td->valbox, dlg)
: dupstr(""));
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
val = dupprintf("%c%s", type, str);
sfree(str);
conf_set_str_str(conf, CONF_ttymodes, key, val);
sfree(val);
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
dlg_refresh(td->listbox, dlg);
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
dlg_listbox_select(td->listbox, dlg, ind);
} else {
/* Not a multisel listbox, so this means nothing selected */
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
dlg_beep(dlg);
}
}
}
}
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
struct environ_data {
union control *varbox, *valbox, *addbutton, *rembutton, *listbox;
};
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void environ_handler(union control *ctrl, dlgparam *dlg,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
struct environ_data *ed =
(struct environ_data *)ctrl->generic.context.p;
if (event == EVENT_REFRESH) {
if (ctrl == ed->listbox) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *key, *val;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
for (val = conf_get_str_strs(conf, CONF_environmt, NULL, &key);
val != NULL;
val = conf_get_str_strs(conf, CONF_environmt, key, &key)) {
char *p = dupprintf("%s\t%s", key, val);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_listbox_add(ctrl, dlg, p);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
sfree(p);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
dlg_update_done(ctrl, dlg);
}
} else if (event == EVENT_ACTION) {
if (ctrl == ed->addbutton) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *key, *val, *str;
key = dlg_editbox_get(ed->varbox, dlg);
if (!*key) {
sfree(key);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_beep(dlg);
return;
}
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
val = dlg_editbox_get(ed->valbox, dlg);
if (!*val) {
sfree(key);
sfree(val);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_beep(dlg);
return;
}
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_set_str_str(conf, CONF_environmt, key, val);
str = dupcat(key, "\t", val, NULL);
dlg_editbox_set(ed->varbox, dlg, "");
dlg_editbox_set(ed->valbox, dlg, "");
sfree(str);
sfree(key);
sfree(val);
dlg_refresh(ed->listbox, dlg);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
} else if (ctrl == ed->rembutton) {
int i = dlg_listbox_index(ed->listbox, dlg);
if (i < 0) {
dlg_beep(dlg);
} else {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *key, *val;
key = conf_get_str_nthstrkey(conf, CONF_environmt, i);
if (key) {
/* Populate controls with the entry we're about to delete
* for ease of editing */
val = conf_get_str_str(conf, CONF_environmt, key);
dlg_editbox_set(ed->varbox, dlg, key);
dlg_editbox_set(ed->valbox, dlg, val);
/* And delete it */
conf_del_str_str(conf, CONF_environmt, key);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
dlg_refresh(ed->listbox, dlg);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}
}
struct portfwd_data {
union control *addbutton, *rembutton, *listbox;
union control *sourcebox, *destbox, *direction;
Platform-independent fixes for NO_IPV6 compilation (prevent segfaults on trying to access pfd->addressfamily which doesn't exist). [originally from svn r5444]
2005-03-05 18:05:18 +03:00
#ifndef NO_IPV6
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
union control *addressfamily;
Platform-independent fixes for NO_IPV6 compilation (prevent segfaults on trying to access pfd->addressfamily which doesn't exist). [originally from svn r5444]
2005-03-05 18:05:18 +03:00
#endif
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
};
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void portfwd_handler(union control *ctrl, dlgparam *dlg,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
void *data, int event)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf = (Conf *)data;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
struct portfwd_data *pfd =
(struct portfwd_data *)ctrl->generic.context.p;
if (event == EVENT_REFRESH) {
if (ctrl == pfd->listbox) {
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *key, *val;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
for (val = conf_get_str_strs(conf, CONF_portfwd, NULL, &key);
val != NULL;
val = conf_get_str_strs(conf, CONF_portfwd, key, &key)) {
char *p;
Fix handling of IPv6 dynamic forwardings. During the Conf revamp, I changed the internal representation of dynamic forwardings so that they were stored as the conceptually sensible L12345=D rather than the old D12345, and added compensation code to translate to the latter form for backwards-compatible data storage and for OpenSSH-harmonised GUI display. Unfortunately I forgot that keys in the forwarding data can also prefix the L/R with a character indicating IPv4/IPv6, and my translations didn't take account of that possibility. Fix them. [originally from svn r10031]
2013-08-22 21:45:26 +04:00
if (!strcmp(val, "D")) {
char *L;
/*
* A dynamic forwarding is stored as L12345=D or
* 6L12345=D (since it's mutually exclusive with
* L12345=anything else), but displayed as D12345
* to match the fiction that 'Local', 'Remote' and
* 'Dynamic' are three distinct modes and also to
* align with OpenSSH's command line option syntax
* that people will already be used to. So, for
* display purposes, find the L in the key string
* and turn it into a D.
*/
p = dupprintf("%s\t", key);
L = strchr(p, 'L');
if (L) *L = 'D';
} else
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
p = dupprintf("%s\t%s", key, val);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_listbox_add(ctrl, dlg, p);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
sfree(p);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
dlg_update_done(ctrl, dlg);
Make sure one of the Local/Remote port forwarding radio buttons actually starts off selected! [originally from svn r2973]
2003-03-22 12:32:49 +03:00
} else if (ctrl == pfd->direction) {
/*
* Default is Local.
*/
dlg_radiobutton_set(ctrl, dlg, 0);
Platform-independent fixes for NO_IPV6 compilation (prevent segfaults on trying to access pfd->addressfamily which doesn't exist). [originally from svn r5444]
2005-03-05 18:05:18 +03:00
#ifndef NO_IPV6
} else if (ctrl == pfd->addressfamily) {
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
dlg_radiobutton_set(ctrl, dlg, 0);
Platform-independent fixes for NO_IPV6 compilation (prevent segfaults on trying to access pfd->addressfamily which doesn't exist). [originally from svn r5444]
2005-03-05 18:05:18 +03:00
#endif
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
} else if (event == EVENT_ACTION) {
if (ctrl == pfd->addbutton) {
Giant const-correctness patch of doom! Having found a lot of unfixed constness issues in recent development, I thought perhaps it was time to get proactive, so I compiled the whole codebase with -Wwrite-strings. That turned up a huge load of const problems, which I've fixed in this commit: the Unix build now goes cleanly through with -Wwrite-strings, and the Windows build is as close as I could get it (there are some lingering issues due to occasional Windows API functions like AcquireCredentialsHandle not having the right constness). Notable fallout beyond the purely mechanical changing of types: - the stuff saved by cmdline_save_param() is now explicitly dupstr()ed, and freed in cmdline_run_saved. - I couldn't make both string arguments to cmdline_process_param() const, because it intentionally writes to one of them in the case where it's the argument to -pw (in the vain hope of being at least slightly friendly to 'ps'), so elsewhere I had to temporarily dupstr() something for the sake of passing it to that function - I had to invent a silly parallel version of const_cmp() so I could pass const string literals in to lookup functions. - stripslashes() in pscp.c and psftp.c has the annoying strchr nature
2015-05-15 13:15:42 +03:00
const char *family, *type;
char *src, *key, *val;
Remove an unused variable. [originally from svn r9589]
2012-07-28 20:33:17 +04:00
int whichbutton;
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
Platform-independent fixes for NO_IPV6 compilation (prevent segfaults on trying to access pfd->addressfamily which doesn't exist). [originally from svn r5444]
2005-03-05 18:05:18 +03:00
#ifndef NO_IPV6
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
whichbutton = dlg_radiobutton_get(pfd->addressfamily, dlg);
if (whichbutton == 1)
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
family = "4";
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
else if (whichbutton == 2)
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
family = "6";
else
Platform-independent fixes for NO_IPV6 compilation (prevent segfaults on trying to access pfd->addressfamily which doesn't exist). [originally from svn r5444]
2005-03-05 18:05:18 +03:00
#endif
Fix warnings when compiling with -DNO_IPV6. A user pointed out that 'family' was uninitialised in config.c, and when I tried test-building with -DNO_IPV6 (and the usual -Werror, of course) some unused variables showed up in uxnet.c too. [originally from svn r10135]
2014-02-05 02:37:53 +04:00
family = "";
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
whichbutton = dlg_radiobutton_get(pfd->direction, dlg);
Dynamic port forwarding by means of a local SOCKS server. Fully supports SOCKS 4, SOCKS 4A and SOCKS 5 (well, actually IPv6 in SOCKS 5 isn't supported, but it'll be no difficulty once I actually get round to it). Thanks to Chas Honton for his `stone soup' patch: I didn't end up actually using any of his code, but it galvanised me into doing it properly myself :-) [originally from svn r3055]
2003-04-05 15:45:21 +04:00
if (whichbutton == 0)
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
type = "L";
Dynamic port forwarding by means of a local SOCKS server. Fully supports SOCKS 4, SOCKS 4A and SOCKS 5 (well, actually IPv6 in SOCKS 5 isn't supported, but it'll be no difficulty once I actually get round to it). Thanks to Chas Honton for his `stone soup' patch: I didn't end up actually using any of his code, but it galvanised me into doing it properly myself :-) [originally from svn r3055]
2003-04-05 15:45:21 +04:00
else if (whichbutton == 1)
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
type = "R";
Dynamic port forwarding by means of a local SOCKS server. Fully supports SOCKS 4, SOCKS 4A and SOCKS 5 (well, actually IPv6 in SOCKS 5 isn't supported, but it'll be no difficulty once I actually get round to it). Thanks to Chas Honton for his `stone soup' patch: I didn't end up actually using any of his code, but it galvanised me into doing it properly myself :-) [originally from svn r3055]
2003-04-05 15:45:21 +04:00
else
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
type = "D";
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
src = dlg_editbox_get(pfd->sourcebox, dlg);
if (!*src) {
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_error_msg(dlg, "You need to specify a source port number");
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
sfree(src);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
return;
}
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
if (*type != 'D') {
val = dlg_editbox_get(pfd->destbox, dlg);
Use the new host_str* functions to improve IPv6 literal support. I've gone through everywhere we handle host names / addresses (on command lines, in PuTTY config, in port forwarding, in X display names, in host key storage...) and tried to make them handle IPv6 literals sensibly, by using the host_str* functions I introduced in my previous commit. Generally it's now OK to use a bracketed IPv6 literal anywhere a hostname might have been valid; in a few cases where no ambiguity exists (e.g. no :port suffix is permitted anyway) unbracketed IPv6 literals are also acceptable. [originally from svn r10120]
2014-01-25 19:58:54 +04:00
if (!*val || !host_strchr(val, ':')) {
Dynamic port forwarding by means of a local SOCKS server. Fully supports SOCKS 4, SOCKS 4A and SOCKS 5 (well, actually IPv6 in SOCKS 5 isn't supported, but it'll be no difficulty once I actually get round to it). Thanks to Chas Honton for his `stone soup' patch: I didn't end up actually using any of his code, but it galvanised me into doing it properly myself :-) [originally from svn r3055]
2003-04-05 15:45:21 +04:00
dlg_error_msg(dlg,
"You need to specify a destination address\n"
"in the form \"host.name:port\"");
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
sfree(src);
sfree(val);
Dynamic port forwarding by means of a local SOCKS server. Fully supports SOCKS 4, SOCKS 4A and SOCKS 5 (well, actually IPv6 in SOCKS 5 isn't supported, but it'll be no difficulty once I actually get round to it). Thanks to Chas Honton for his `stone soup' patch: I didn't end up actually using any of his code, but it galvanised me into doing it properly myself :-) [originally from svn r3055]
2003-04-05 15:45:21 +04:00
return;
}
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
} else {
type = "L";
val = dupstr("D"); /* special case */
}
key = dupcat(family, type, src, NULL);
sfree(src);
if (conf_get_str_str_opt(conf, CONF_portfwd, key)) {
dlg_error_msg(dlg, "Specified forwarding already exists");
} else {
conf_set_str_str(conf, CONF_portfwd, key, val);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
sfree(key);
sfree(val);
dlg_refresh(pfd->listbox, dlg);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
} else if (ctrl == pfd->rembutton) {
int i = dlg_listbox_index(pfd->listbox, dlg);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
if (i < 0) {
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
dlg_beep(dlg);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
} else {
Giant const-correctness patch of doom! Having found a lot of unfixed constness issues in recent development, I thought perhaps it was time to get proactive, so I compiled the whole codebase with -Wwrite-strings. That turned up a huge load of const problems, which I've fixed in this commit: the Unix build now goes cleanly through with -Wwrite-strings, and the Windows build is as close as I could get it (there are some lingering issues due to occasional Windows API functions like AcquireCredentialsHandle not having the right constness). Notable fallout beyond the purely mechanical changing of types: - the stuff saved by cmdline_save_param() is now explicitly dupstr()ed, and freed in cmdline_run_saved. - I couldn't make both string arguments to cmdline_process_param() const, because it intentionally writes to one of them in the case where it's the argument to -pw (in the vain hope of being at least slightly friendly to 'ps'), so elsewhere I had to temporarily dupstr() something for the sake of passing it to that function - I had to invent a silly parallel version of const_cmp() so I could pass const string literals in to lookup functions. - stripslashes() in pscp.c and psftp.c has the annoying strchr nature
2015-05-15 13:15:42 +03:00
char *key, *p;
const char *val;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
key = conf_get_str_nthstrkey(conf, CONF_portfwd, i);
if (key) {
In controls where a list of entries is manipulated by Add/Remove buttons (SSH tunnels, TTY modes, and environment variables), when the Remove button is pressed, populate the edit controls from the entry that has just been deleted. Several users have requested this, as it makes editing an entry easier (read- modify-write) in the cases where order is unimportant, and also provides a degree of undo-ability. [originally from svn r7298]
2007-02-18 22:56:16 +03:00
static const char *const afs = "A46";
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
static const char *const dirs = "LRD";
Add a missing const. The variable in question holds the return value of strchr when its input string was const, so it ought logically to be const itself even though the official prototype of strchr permits it not to be.
2018-04-07 16:23:43 +03:00
const char *afp;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
int dir;
Avoid "unused variable" warning when NO_IPV6 defined. [originally from svn r7710]
2007-09-04 00:52:56 +04:00
#ifndef NO_IPV6
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
int idx;
#endif
/* Populate controls with the entry we're about to delete
* for ease of editing */
p = key;
afp = strchr(afs, *p);
#ifndef NO_IPV6
idx = afp ? afp-afs : 0;
Avoid "unused variable" warning when NO_IPV6 defined. [originally from svn r7710]
2007-09-04 00:52:56 +04:00
#endif
In controls where a list of entries is manipulated by Add/Remove buttons (SSH tunnels, TTY modes, and environment variables), when the Remove button is pressed, populate the edit controls from the entry that has just been deleted. Several users have requested this, as it makes editing an entry easier (read- modify-write) in the cases where order is unimportant, and also provides a degree of undo-ability. [originally from svn r7298]
2007-02-18 22:56:16 +03:00
if (afp)
p++;
#ifndef NO_IPV6
dlg_radiobutton_set(pfd->addressfamily, dlg, idx);
#endif
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
In controls where a list of entries is manipulated by Add/Remove buttons (SSH tunnels, TTY modes, and environment variables), when the Remove button is pressed, populate the edit controls from the entry that has just been deleted. Several users have requested this, as it makes editing an entry easier (read- modify-write) in the cases where order is unimportant, and also provides a degree of undo-ability. [originally from svn r7298]
2007-02-18 22:56:16 +03:00
dir = *p;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
val = conf_get_str_str(conf, CONF_portfwd, key);
if (!strcmp(val, "D")) {
dir = 'D';
val = "";
}
In controls where a list of entries is manipulated by Add/Remove buttons (SSH tunnels, TTY modes, and environment variables), when the Remove button is pressed, populate the edit controls from the entry that has just been deleted. Several users have requested this, as it makes editing an entry easier (read- modify-write) in the cases where order is unimportant, and also provides a degree of undo-ability. [originally from svn r7298]
2007-02-18 22:56:16 +03:00
dlg_radiobutton_set(pfd->direction, dlg,
strchr(dirs, dir) - dirs);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
p++;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
dlg_editbox_set(pfd->sourcebox, dlg, p);
dlg_editbox_set(pfd->destbox, dlg, val);
/* And delete it */
conf_del_str_str(conf, CONF_portfwd, key);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
dlg_refresh(pfd->listbox, dlg);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}
}
New option to manually configure the expected host key(s). This option is available from the command line as '-hostkey', and is also configurable through the GUI. When enabled, it completely replaces all of the automated host key management: the server's host key will be checked against the manually configured list, and the connection will be allowed or disconnected on that basis, and the host key store in the registry will not be either consulted or updated. The main aim is to provide a means of automatically running Plink, PSCP or PSFTP deep inside Windows services where HKEY_CURRENT_USER isn't available to have stored the right host key in. But it also permits you to specify a list of multiple host keys, which means a second use case for the same mechanism will probably be round-robin DNS names that select one of several servers with different host keys. Host keys can be specified as the standard MD5 fingerprint or as an SSH-2 base64 blob, and are canonicalised on input. (The base64 blob is more unwieldy, especially with Windows command-line length limits, but provides a means of specifying the _whole_ public key in case you don't trust MD5. I haven't bothered to provide an analogous mechanism for SSH-1, on the basis that anyone worrying about MD5 should have stopped using SSH-1 already!) [originally from svn r10220]
2014-09-09 15:46:24 +04:00
struct manual_hostkey_data {
union control *addbutton, *rembutton, *listbox, *keybox;
};
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void manual_hostkey_handler(union control *ctrl, dlgparam *dlg,
New option to manually configure the expected host key(s). This option is available from the command line as '-hostkey', and is also configurable through the GUI. When enabled, it completely replaces all of the automated host key management: the server's host key will be checked against the manually configured list, and the connection will be allowed or disconnected on that basis, and the host key store in the registry will not be either consulted or updated. The main aim is to provide a means of automatically running Plink, PSCP or PSFTP deep inside Windows services where HKEY_CURRENT_USER isn't available to have stored the right host key in. But it also permits you to specify a list of multiple host keys, which means a second use case for the same mechanism will probably be round-robin DNS names that select one of several servers with different host keys. Host keys can be specified as the standard MD5 fingerprint or as an SSH-2 base64 blob, and are canonicalised on input. (The base64 blob is more unwieldy, especially with Windows command-line length limits, but provides a means of specifying the _whole_ public key in case you don't trust MD5. I haven't bothered to provide an analogous mechanism for SSH-1, on the basis that anyone worrying about MD5 should have stopped using SSH-1 already!) [originally from svn r10220]
2014-09-09 15:46:24 +04:00
void *data, int event)
{
Conf *conf = (Conf *)data;
struct manual_hostkey_data *mh =
(struct manual_hostkey_data *)ctrl->generic.context.p;
if (event == EVENT_REFRESH) {
if (ctrl == mh->listbox) {
char *key, *val;
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
for (val = conf_get_str_strs(conf, CONF_ssh_manual_hostkeys,
NULL, &key);
val != NULL;
val = conf_get_str_strs(conf, CONF_ssh_manual_hostkeys,
key, &key)) {
dlg_listbox_add(ctrl, dlg, key);
}
dlg_update_done(ctrl, dlg);
}
} else if (event == EVENT_ACTION) {
if (ctrl == mh->addbutton) {
char *key;
key = dlg_editbox_get(mh->keybox, dlg);
if (!*key) {
dlg_error_msg(dlg, "You need to specify a host key or "
"fingerprint");
sfree(key);
return;
}
if (!validate_manual_hostkey(key)) {
dlg_error_msg(dlg, "Host key is not in a valid format");
} else if (conf_get_str_str_opt(conf, CONF_ssh_manual_hostkeys,
key)) {
dlg_error_msg(dlg, "Specified host key is already listed");
} else {
conf_set_str_str(conf, CONF_ssh_manual_hostkeys, key, "");
}
sfree(key);
dlg_refresh(mh->listbox, dlg);
} else if (ctrl == mh->rembutton) {
int i = dlg_listbox_index(mh->listbox, dlg);
if (i < 0) {
dlg_beep(dlg);
} else {
char *key;
key = conf_get_str_nthstrkey(conf, CONF_ssh_manual_hostkeys, i);
if (key) {
dlg_editbox_set(mh->keybox, dlg, key);
/* And delete it */
conf_del_str_str(conf, CONF_ssh_manual_hostkeys, key);
}
}
dlg_refresh(mh->listbox, dlg);
}
}
}
Expose the structure tag 'dlgparam'. This continues my ongoing crusade against dangerous 'void *' parameters.
2018-09-13 14:58:44 +03:00
static void clipboard_selector_handler(union control *ctrl, dlgparam *dlg,
Add GUI configuration for choice of clipboards. On all platforms, you can now configure which clipboard the mouse pastes from, which clipboard Ctrl-Ins and Shift-Ins access, and which Ctrl-Shift-C and Ctrl-Shift-V access. In each case, the options are: - nothing at all - a clipboard which is implicitly written by the act of mouse selection (the PRIMARY selection on X, CLIP_LOCAL everywhere else) - the standard clipboard written by explicit copy/paste UI actions (CLIPBOARD on X, the unique system clipboard elsewhere). Also, you can control whether selecting text with the mouse _also_ writes to the explicitly accessed clipboard. The wording of the various messages changes between platforms, but the basic UI shape is the same everywhere.
2017-12-10 20:16:50 +03:00
void *data, int event)
{
Conf *conf = (Conf *)data;
int setting = ctrl->generic.context.i;
Support custom clipboard names under X. This required me to turn the drop-lists into combo boxes and add an extra string-typed Conf setting alongside each enumerated value.
2017-12-17 21:44:27 +03:00
#ifdef NAMED_CLIPBOARDS
int strsetting = ctrl->editbox.context2.i;
#endif
static const struct {
const char *name;
int id;
} options[] = {
{"No action", CLIPUI_NONE},
{CLIPNAME_IMPLICIT, CLIPUI_IMPLICIT},
{CLIPNAME_EXPLICIT, CLIPUI_EXPLICIT},
};
Add GUI configuration for choice of clipboards. On all platforms, you can now configure which clipboard the mouse pastes from, which clipboard Ctrl-Ins and Shift-Ins access, and which Ctrl-Shift-C and Ctrl-Shift-V access. In each case, the options are: - nothing at all - a clipboard which is implicitly written by the act of mouse selection (the PRIMARY selection on X, CLIP_LOCAL everywhere else) - the standard clipboard written by explicit copy/paste UI actions (CLIPBOARD on X, the unique system clipboard elsewhere). Also, you can control whether selecting text with the mouse _also_ writes to the explicitly accessed clipboard. The wording of the various messages changes between platforms, but the basic UI shape is the same everywhere.
2017-12-10 20:16:50 +03:00
if (event == EVENT_REFRESH) {
int i, val = conf_get_int(conf, setting);
dlg_update_start(ctrl, dlg);
dlg_listbox_clear(ctrl, dlg);
Support custom clipboard names under X. This required me to turn the drop-lists into combo boxes and add an extra string-typed Conf setting alongside each enumerated value.
2017-12-17 21:44:27 +03:00
#ifdef NAMED_CLIPBOARDS
for (i = 0; i < lenof(options); i++)
dlg_listbox_add(ctrl, dlg, options[i].name);
if (val == CLIPUI_CUSTOM) {
const char *sval = conf_get_str(conf, strsetting);
for (i = 0; i < lenof(options); i++)
if (!strcmp(sval, options[i].name))
break; /* needs escaping */
if (i < lenof(options) || sval[0] == '=') {
char *escaped = dupcat("=", sval, (const char *)NULL);
dlg_editbox_set(ctrl, dlg, escaped);
sfree(escaped);
} else {
dlg_editbox_set(ctrl, dlg, sval);
}
} else {
dlg_editbox_set(ctrl, dlg, options[0].name); /* fallback */
for (i = 0; i < lenof(options); i++)
if (val == options[i].id)
dlg_editbox_set(ctrl, dlg, options[i].name);
}
#else
for (i = 0; i < lenof(options); i++)
dlg_listbox_addwithid(ctrl, dlg, options[i].name, options[i].id);
Add GUI configuration for choice of clipboards. On all platforms, you can now configure which clipboard the mouse pastes from, which clipboard Ctrl-Ins and Shift-Ins access, and which Ctrl-Shift-C and Ctrl-Shift-V access. In each case, the options are: - nothing at all - a clipboard which is implicitly written by the act of mouse selection (the PRIMARY selection on X, CLIP_LOCAL everywhere else) - the standard clipboard written by explicit copy/paste UI actions (CLIPBOARD on X, the unique system clipboard elsewhere). Also, you can control whether selecting text with the mouse _also_ writes to the explicitly accessed clipboard. The wording of the various messages changes between platforms, but the basic UI shape is the same everywhere.
2017-12-10 20:16:50 +03:00
dlg_listbox_select(ctrl, dlg, 0); /* fallback */
Support custom clipboard names under X. This required me to turn the drop-lists into combo boxes and add an extra string-typed Conf setting alongside each enumerated value.
2017-12-17 21:44:27 +03:00
for (i = 0; i < lenof(options); i++)
if (val == options[i].id)
Add GUI configuration for choice of clipboards. On all platforms, you can now configure which clipboard the mouse pastes from, which clipboard Ctrl-Ins and Shift-Ins access, and which Ctrl-Shift-C and Ctrl-Shift-V access. In each case, the options are: - nothing at all - a clipboard which is implicitly written by the act of mouse selection (the PRIMARY selection on X, CLIP_LOCAL everywhere else) - the standard clipboard written by explicit copy/paste UI actions (CLIPBOARD on X, the unique system clipboard elsewhere). Also, you can control whether selecting text with the mouse _also_ writes to the explicitly accessed clipboard. The wording of the various messages changes between platforms, but the basic UI shape is the same everywhere.
2017-12-10 20:16:50 +03:00
dlg_listbox_select(ctrl, dlg, i);
Support custom clipboard names under X. This required me to turn the drop-lists into combo boxes and add an extra string-typed Conf setting alongside each enumerated value.
2017-12-17 21:44:27 +03:00
#endif
Add GUI configuration for choice of clipboards. On all platforms, you can now configure which clipboard the mouse pastes from, which clipboard Ctrl-Ins and Shift-Ins access, and which Ctrl-Shift-C and Ctrl-Shift-V access. In each case, the options are: - nothing at all - a clipboard which is implicitly written by the act of mouse selection (the PRIMARY selection on X, CLIP_LOCAL everywhere else) - the standard clipboard written by explicit copy/paste UI actions (CLIPBOARD on X, the unique system clipboard elsewhere). Also, you can control whether selecting text with the mouse _also_ writes to the explicitly accessed clipboard. The wording of the various messages changes between platforms, but the basic UI shape is the same everywhere.
2017-12-10 20:16:50 +03:00
dlg_update_done(ctrl, dlg);
Support custom clipboard names under X. This required me to turn the drop-lists into combo boxes and add an extra string-typed Conf setting alongside each enumerated value.
2017-12-17 21:44:27 +03:00
} else if (event == EVENT_SELCHANGE
#ifdef NAMED_CLIPBOARDS
|| event == EVENT_VALCHANGE
#endif
) {
#ifdef NAMED_CLIPBOARDS
const char *sval = dlg_editbox_get(ctrl, dlg);
int i;
for (i = 0; i < lenof(options); i++)
if (!strcmp(sval, options[i].name)) {
conf_set_int(conf, setting, options[i].id);
conf_set_str(conf, strsetting, "");
break;
}
if (i == lenof(options)) {
conf_set_int(conf, setting, CLIPUI_CUSTOM);
if (sval[0] == '=')
sval++;
conf_set_str(conf, strsetting, sval);
}
#else
Add GUI configuration for choice of clipboards. On all platforms, you can now configure which clipboard the mouse pastes from, which clipboard Ctrl-Ins and Shift-Ins access, and which Ctrl-Shift-C and Ctrl-Shift-V access. In each case, the options are: - nothing at all - a clipboard which is implicitly written by the act of mouse selection (the PRIMARY selection on X, CLIP_LOCAL everywhere else) - the standard clipboard written by explicit copy/paste UI actions (CLIPBOARD on X, the unique system clipboard elsewhere). Also, you can control whether selecting text with the mouse _also_ writes to the explicitly accessed clipboard. The wording of the various messages changes between platforms, but the basic UI shape is the same everywhere.
2017-12-10 20:16:50 +03:00
int index = dlg_listbox_index(ctrl, dlg);
if (index >= 0) {
int val = dlg_listbox_getid(ctrl, dlg, index);
conf_set_int(conf, setting, val);
}
Support custom clipboard names under X. This required me to turn the drop-lists into combo boxes and add an extra string-typed Conf setting alongside each enumerated value.
2017-12-17 21:44:27 +03:00
#endif
Add GUI configuration for choice of clipboards. On all platforms, you can now configure which clipboard the mouse pastes from, which clipboard Ctrl-Ins and Shift-Ins access, and which Ctrl-Shift-C and Ctrl-Shift-V access. In each case, the options are: - nothing at all - a clipboard which is implicitly written by the act of mouse selection (the PRIMARY selection on X, CLIP_LOCAL everywhere else) - the standard clipboard written by explicit copy/paste UI actions (CLIPBOARD on X, the unique system clipboard elsewhere). Also, you can control whether selecting text with the mouse _also_ writes to the explicitly accessed clipboard. The wording of the various messages changes between platforms, but the basic UI shape is the same everywhere.
2017-12-10 20:16:50 +03:00
}
}
Support custom clipboard names under X. This required me to turn the drop-lists into combo boxes and add an extra string-typed Conf setting alongside each enumerated value.
2017-12-17 21:44:27 +03:00
static void clipboard_control(struct controlset *s, const char *label,
char shortcut, int percentage, intorptr helpctx,
int setting, int strsetting)
{
#ifdef NAMED_CLIPBOARDS
ctrl_combobox(s, label, shortcut, percentage, helpctx,
clipboard_selector_handler, I(setting), I(strsetting));
#else
/* strsetting isn't needed in this case */
ctrl_droplist(s, label, shortcut, percentage, helpctx,
clipboard_selector_handler, I(setting));
#endif
}
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
void setup_config_box(struct controlbox *b, bool midsession,
If a new session was saved from Change Settings, a side-effect on Windows was that the global `sesslist' got out of sync with the saved-sessions submenu, causing the latter to launch the wrong sessions. Also, Change Settings wasn't getting a fresh session list, so if the set of sessions had changed since session startup it wouldn't reflect that (at least until a session was saved). Fixed (on all platforms). Therefore, since the global sesslist didn't seem to be useful, I've got rid of it; config.c creates one as needed, as do the frontends. (Not tried compiling Mac changes.) Also, we now build the saved-sessions submenu on demand on Windows and Unix. (This should probably also be done on the Mac.) [originally from svn r5609]
2005-04-07 05:36:28 +04:00
int protocol, int protcfginfo)
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
{
struct controlset *s;
struct sessionsaver_data *ssd;
struct charclass_data *ccd;
struct colour_data *cd;
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
struct ttymodes_data *td;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
struct environ_data *ed;
struct portfwd_data *pfd;
New option to manually configure the expected host key(s). This option is available from the command line as '-hostkey', and is also configurable through the GUI. When enabled, it completely replaces all of the automated host key management: the server's host key will be checked against the manually configured list, and the connection will be allowed or disconnected on that basis, and the host key store in the registry will not be either consulted or updated. The main aim is to provide a means of automatically running Plink, PSCP or PSFTP deep inside Windows services where HKEY_CURRENT_USER isn't available to have stored the right host key in. But it also permits you to specify a list of multiple host keys, which means a second use case for the same mechanism will probably be round-robin DNS names that select one of several servers with different host keys. Host keys can be specified as the standard MD5 fingerprint or as an SSH-2 base64 blob, and are canonicalised on input. (The base64 blob is more unwieldy, especially with Windows command-line length limits, but provides a means of specifying the _whole_ public key in case you don't trust MD5. I haven't bothered to provide an analogous mechanism for SSH-1, on the basis that anyone worrying about MD5 should have stopped using SSH-1 already!) [originally from svn r10220]
2014-09-09 15:46:24 +04:00
struct manual_hostkey_data *mh;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
union control *c;
Now that we have `appname', make much wider use of it. In particular, the config box uses it in place of the word `PuTTY', which means mid-session reconfig in pterm will look less strange once I implement it. Also, while I'm at it, I've personalised all the dialog boxes and menu items and suchlike so that PuTTYtel actually claims to be PuTTYtel rather than PuTTY. [originally from svn r3074]
2003-04-06 18:11:33 +04:00
char *str;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ssd = (struct sessionsaver_data *)
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
ctrl_alloc_with_free(b, sizeof(struct sessionsaver_data),
sessionsaver_data_free);
Implemented Change Settings under Unix. We are gradually getting there. [originally from svn r3092]
2003-04-10 22:00:50 +04:00
memset(ssd, 0, sizeof(*ssd));
Use the new ctrl_alloc_with_free to clean up a long-standing FIXME in the session saving code, in which the contents of the edit box giving the current saved session name was stored in a horrid place with a fixed length. Now it's dangling off sessionsaver_data as it always ought to have been, and it's dynamically reallocated to the appropriate length, and there's a free function that cleans it up at the end of the dialog's lifetime. [originally from svn r9923]
2013-07-14 14:46:34 +04:00
ssd->savedsession = dupstr("");
Remove "Load" button in mid-session configuration dialog, as it allows the user to manipulate settings they can't see so could lead to confusion. (Also remove "Delete" button for some sort of UI consistency even though it's harmless.) Also conditionalise other aspects of sessionsaver_handler() that don't make sense mid-session. [originally from svn r5043]
2004-12-30 13:58:28 +03:00
ssd->midsession = midsession;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* The standard panel that appears at the bottom of all panels:
* Open, Cancel, Apply etc.
*/
s = ctrl_getset(b, "", "", "");
ctrl_columns(s, 5, 20, 20, 20, 20, 20);
ssd->okbutton = ctrl_pushbutton(s,
(midsession ? "Apply" : "Open"),
(char)(midsession ? 'a' : 'o'),
HELPCTX(no_help),
sessionsaver_handler, P(ssd));
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
ssd->okbutton->button.isdefault = true;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ssd->okbutton->generic.column = 3;
ssd->cancelbutton = ctrl_pushbutton(s, "Cancel", 'c', HELPCTX(no_help),
sessionsaver_handler, P(ssd));
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
ssd->cancelbutton->button.iscancel = true;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ssd->cancelbutton->generic.column = 4;
/* We carefully don't close the 5-column part, so that platform-
* specific add-ons can put extra buttons alongside Open and Cancel. */
/*
* The Session panel.
*/
Now that we have `appname', make much wider use of it. In particular, the config box uses it in place of the word `PuTTY', which means mid-session reconfig in pterm will look less strange once I implement it. Also, while I'm at it, I've personalised all the dialog boxes and menu items and suchlike so that PuTTYtel actually claims to be PuTTYtel rather than PuTTY. [originally from svn r3074]
2003-04-06 18:11:33 +04:00
str = dupprintf("Basic options for your %s session", appname);
ctrl_settitle(b, "Session", str);
sfree(str);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
if (!midsession) {
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
struct hostport *hp = (struct hostport *)
ctrl_alloc(b, sizeof(struct hostport));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
s = ctrl_getset(b, "Session", "hostport",
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
"Specify the destination you want to connect to");
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_columns(s, 2, 75, 25);
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
c = ctrl_editbox(s, HOST_BOX_TITLE, 'n', 100,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
HELPCTX(session_hostname),
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
config_host_handler, I(0), I(0));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
c->generic.column = 0;
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
hp->host = c;
c = ctrl_editbox(s, PORT_BOX_TITLE, 'p', 100,
HELPCTX(session_hostname),
config_port_handler, I(0), I(0));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
c->generic.column = 1;
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
hp->port = c;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_columns(s, 1, 100);
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
Turn Backend into a sensible classoid. Nearly every part of the code that ever handles a full backend structure has historically done it using a pair of pointer variables, one pointing at a constant struct full of function pointers, and the other pointing to a 'void *' state object that's passed to each of those. While I'm modernising the rest of the code, this seems like a good time to turn that into the same more or less type-safe and less cumbersome system as I'm using for other parts of the code, such as Socket, Plug, BinaryPacketProtocol and so forth: the Backend structure contains a vtable pointer, and a system of macro wrappers handles dispatching through that vtable.
2018-09-11 18:23:38 +03:00
if (!backend_vt_from_proto(PROT_SSH)) {
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
ctrl_radiobuttons(s, "Connection type:", NO_SHORTCUT, 3,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
HELPCTX(session_hostname),
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
config_protocolbuttons_handler, P(hp),
Add a keyboard shortcut for the "serial" protocol to the GUI. Will cause non-zero, but hopefully acceptable, disruption to people's finger macros. [originally from svn r8749]
2009-11-13 16:24:32 +03:00
"Raw", 'w', I(PROT_RAW),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
"Telnet", 't', I(PROT_TELNET),
"Rlogin", 'i', I(PROT_RLOGIN),
NULL);
} else {
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
ctrl_radiobuttons(s, "Connection type:", NO_SHORTCUT, 4,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
HELPCTX(session_hostname),
Support for Windows PuTTY connecting straight to a local serial port in place of making a network connection. This has involved a couple of minor infrastructure changes: - New dlg_label_change() function in the dialog.h interface, which alters the label on a control. Only used, at present, to switch the Host Name and Port boxes into Serial Line and Speed, which means that any platform not implementing serial connections (i.e. currently all but Windows) does not need to actually do anything in this function. Yet. - New small piece of infrastructure: cfg_launchable() determines whether a Config structure describes a session ready to be launched. This was previously determined by seeing if it had a non-empty host name, but it has to check the serial line as well so there's a centralised function for it. I haven't gone through all front ends and arranged for this function to be used everywhere it needs to be; so far I've only checked Windows. - Similarly, cfg_dest() returns the destination of a connection (host name or serial line) in a text format suitable for putting into messages such as `Unable to connect to %s'. [originally from svn r6815]
2006-08-28 14:35:12 +04:00
config_protocolbuttons_handler, P(hp),
Add a keyboard shortcut for the "serial" protocol to the GUI. Will cause non-zero, but hopefully acceptable, disruption to people's finger macros. [originally from svn r8749]
2009-11-13 16:24:32 +03:00
"Raw", 'w', I(PROT_RAW),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
"Telnet", 't', I(PROT_TELNET),
"Rlogin", 'i', I(PROT_RLOGIN),
"SSH", 's', I(PROT_SSH),
NULL);
}
}
Ability to save in mid-session! Simplest possible resolution to all the difficult questions about when it's sensible to offer the option of saving to the slot we loaded from: _we never do_. The user must always explicitly specify a slot to save to. [originally from svn r5035] [this svn revision also touched putty-wishlist]
2004-12-28 19:46:30 +03:00
/*
* The Load/Save panel is available even in mid-session.
*/
s = ctrl_getset(b, "Session", "savedsessions",
In r5043 Jacob removed the `Load' and `Delete' buttons in the saved- sessions panel in the reconfig box. I think, given that, the title of that box also wants work :-) [originally from svn r5052] [r5043 == f494d60e06f19600f6354160e18b248f7bbcb0b5]
2004-12-31 14:46:28 +03:00
midsession ? "Save the current session settings" :
Ability to save in mid-session! Simplest possible resolution to all the difficult questions about when it's sensible to offer the option of saving to the slot we loaded from: _we never do_. The user must always explicitly specify a slot to save to. [originally from svn r5035] [this svn revision also touched putty-wishlist]
2004-12-28 19:46:30 +03:00
"Load, save or delete a stored session");
ctrl_columns(s, 2, 75, 25);
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
get_sesslist(&ssd->sesslist, true);
Ability to save in mid-session! Simplest possible resolution to all the difficult questions about when it's sensible to offer the option of saving to the slot we loaded from: _we never do_. The user must always explicitly specify a slot to save to. [originally from svn r5035] [this svn revision also touched putty-wishlist]
2004-12-28 19:46:30 +03:00
ssd->editbox = ctrl_editbox(s, "Saved Sessions", 'e', 100,
HELPCTX(session_saved),
sessionsaver_handler, P(ssd), P(NULL));
ssd->editbox->generic.column = 0;
/* Reset columns so that the buttons are alongside the list, rather
* than alongside that edit box. */
ctrl_columns(s, 1, 100);
ctrl_columns(s, 2, 75, 25);
ssd->listbox = ctrl_listbox(s, NULL, NO_SHORTCUT,
HELPCTX(session_saved),
sessionsaver_handler, P(ssd));
ssd->listbox->generic.column = 0;
ssd->listbox->listbox.height = 7;
Remove "Load" button in mid-session configuration dialog, as it allows the user to manipulate settings they can't see so could lead to confusion. (Also remove "Delete" button for some sort of UI consistency even though it's harmless.) Also conditionalise other aspects of sessionsaver_handler() that don't make sense mid-session. [originally from svn r5043]
2004-12-30 13:58:28 +03:00
if (!midsession) {
ssd->loadbutton = ctrl_pushbutton(s, "Load", 'l',
HELPCTX(session_saved),
sessionsaver_handler, P(ssd));
ssd->loadbutton->generic.column = 1;
} else {
/* We can't offer the Load button mid-session, as it would allow the
* user to load and subsequently save settings they can't see. (And
* also change otherwise immutable settings underfoot; that probably
* shouldn't be a problem, but.) */
ssd->loadbutton = NULL;
}
/* "Save" button is permitted mid-session. */
Ability to save in mid-session! Simplest possible resolution to all the difficult questions about when it's sensible to offer the option of saving to the slot we loaded from: _we never do_. The user must always explicitly specify a slot to save to. [originally from svn r5035] [this svn revision also touched putty-wishlist]
2004-12-28 19:46:30 +03:00
ssd->savebutton = ctrl_pushbutton(s, "Save", 'v',
HELPCTX(session_saved),
sessionsaver_handler, P(ssd));
ssd->savebutton->generic.column = 1;
Remove "Load" button in mid-session configuration dialog, as it allows the user to manipulate settings they can't see so could lead to confusion. (Also remove "Delete" button for some sort of UI consistency even though it's harmless.) Also conditionalise other aspects of sessionsaver_handler() that don't make sense mid-session. [originally from svn r5043]
2004-12-30 13:58:28 +03:00
if (!midsession) {
ssd->delbutton = ctrl_pushbutton(s, "Delete", 'd',
HELPCTX(session_saved),
sessionsaver_handler, P(ssd));
ssd->delbutton->generic.column = 1;
} else {
/* Disable the Delete button mid-session too, for UI consistency. */
ssd->delbutton = NULL;
}
Ability to save in mid-session! Simplest possible resolution to all the difficult questions about when it's sensible to offer the option of saving to the slot we loaded from: _we never do_. The user must always explicitly specify a slot to save to. [originally from svn r5035] [this svn revision also touched putty-wishlist]
2004-12-28 19:46:30 +03:00
ctrl_columns(s, 1, 100);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
s = ctrl_getset(b, "Session", "otheropts", NULL);
Remove a pointless assignment in setup_config_box. [originally from svn r9925]
2013-07-14 14:46:42 +04:00
ctrl_radiobuttons(s, "Close window on exit:", 'x', 4,
HELPCTX(session_coe),
conf_radiobutton_handler,
I(CONF_close_on_exit),
"Always", I(FORCE_ON),
"Never", I(FORCE_OFF),
"Only on clean exit", I(AUTO), NULL);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* The Session/Logging panel.
*/
ctrl_settitle(b, "Session/Logging", "Options controlling session logging");
s = ctrl_getset(b, "Session/Logging", "main", NULL);
Finer granularity of config box handling. SSH packet logging should now not show up when it's meaningless (in PuTTYtel, in pterm, and in the middle of any non-SSH session), and the Connection panel is inhibited completely in pterm. [originally from svn r3146]
2003-04-26 18:35:34 +04:00
/*
* The logging buttons change depending on whether SSH packet
* logging can sensibly be available.
*/
{
Giant const-correctness patch of doom! Having found a lot of unfixed constness issues in recent development, I thought perhaps it was time to get proactive, so I compiled the whole codebase with -Wwrite-strings. That turned up a huge load of const problems, which I've fixed in this commit: the Unix build now goes cleanly through with -Wwrite-strings, and the Windows build is as close as I could get it (there are some lingering issues due to occasional Windows API functions like AcquireCredentialsHandle not having the right constness). Notable fallout beyond the purely mechanical changing of types: - the stuff saved by cmdline_save_param() is now explicitly dupstr()ed, and freed in cmdline_run_saved. - I couldn't make both string arguments to cmdline_process_param() const, because it intentionally writes to one of them in the case where it's the argument to -pw (in the vain hope of being at least slightly friendly to 'ps'), so elsewhere I had to temporarily dupstr() something for the sake of passing it to that function - I had to invent a silly parallel version of const_cmp() so I could pass const string literals in to lookup functions. - stripslashes() in pscp.c and psftp.c has the annoying strchr nature
2015-05-15 13:15:42 +03:00
const char *sshlogname, *sshrawlogname;
Finer granularity of config box handling. SSH packet logging should now not show up when it's meaningless (in PuTTYtel, in pterm, and in the middle of any non-SSH session), and the Connection panel is inhibited completely in pterm. [originally from svn r3146]
2003-04-26 18:35:34 +04:00
if ((midsession && protocol == PROT_SSH) ||
Turn Backend into a sensible classoid. Nearly every part of the code that ever handles a full backend structure has historically done it using a pair of pointer variables, one pointing at a constant struct full of function pointers, and the other pointing to a 'void *' state object that's passed to each of those. While I'm modernising the rest of the code, this seems like a good time to turn that into the same more or less type-safe and less cumbersome system as I'm using for other parts of the code, such as Socket, Plug, BinaryPacketProtocol and so forth: the Backend structure contains a vtable pointer, and a system of macro wrappers handles dispatching through that vtable.
2018-09-11 18:23:38 +03:00
(!midsession && backend_vt_from_proto(PROT_SSH))) {
New logging mode, which records the exact bytes sent over the wire in an SSH connection _in addition_ to the decrypted packets. This will hopefully come in useful for debugging wire data corruption issues: you can strace the server, enable this mode in the client, and compare the sent and received data. I'd _like_ to have this mode also log Diffie-Hellman private exponents, session IDs, encryption and MAC keys, so that the resulting log file could be used to independently verify the correctness of all cryptographic operations performed by PuTTY. However, I haven't been able to convince myself that the security implications are acceptable. (It doesn't matter that this information would permit an attacker to decrypt the session, because the _already_ decrypted session is stored alongside it in the log file. And I'm not planning, under any circumstances, to log users' private keys. But gaining access to the log file while the session was still running would permit an attacker to _hijack_ the session, and that's the iffy bit.) [originally from svn r6835]
2006-08-29 23:07:11 +04:00
sshlogname = "SSH packets";
sshrawlogname = "SSH packets and raw data";
} else {
sshlogname = NULL; /* this will disable both buttons */
sshrawlogname = NULL; /* this will just placate optimisers */
}
ctrl_radiobuttons(s, "Session logging:", NO_SHORTCUT, 2,
Finer granularity of config box handling. SSH packet logging should now not show up when it's meaningless (in PuTTYtel, in pterm, and in the middle of any non-SSH session), and the Connection panel is inhibited completely in pterm. [originally from svn r3146]
2003-04-26 18:35:34 +04:00
HELPCTX(logging_main),
Fix pterm-logtype-crash [originally from svn r5505]
2005-03-15 13:43:29 +03:00
loggingbuttons_handler,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
I(CONF_logtype),
New logging mode, which records the exact bytes sent over the wire in an SSH connection _in addition_ to the decrypted packets. This will hopefully come in useful for debugging wire data corruption issues: you can strace the server, enable this mode in the client, and compare the sent and received data. I'd _like_ to have this mode also log Diffie-Hellman private exponents, session IDs, encryption and MAC keys, so that the resulting log file could be used to independently verify the correctness of all cryptographic operations performed by PuTTY. However, I haven't been able to convince myself that the security implications are acceptable. (It doesn't matter that this information would permit an attacker to decrypt the session, because the _already_ decrypted session is stored alongside it in the log file. And I'm not planning, under any circumstances, to log users' private keys. But gaining access to the log file while the session was still running would permit an attacker to _hijack_ the session, and that's the iffy bit.) [originally from svn r6835]
2006-08-29 23:07:11 +04:00
"None", 't', I(LGTYP_NONE),
"Printable output", 'p', I(LGTYP_ASCII),
"All session output", 'l', I(LGTYP_DEBUG),
Finer granularity of config box handling. SSH packet logging should now not show up when it's meaningless (in PuTTYtel, in pterm, and in the middle of any non-SSH session), and the Connection panel is inhibited completely in pterm. [originally from svn r3146]
2003-04-26 18:35:34 +04:00
sshlogname, 's', I(LGTYP_PACKETS),
New logging mode, which records the exact bytes sent over the wire in an SSH connection _in addition_ to the decrypted packets. This will hopefully come in useful for debugging wire data corruption issues: you can strace the server, enable this mode in the client, and compare the sent and received data. I'd _like_ to have this mode also log Diffie-Hellman private exponents, session IDs, encryption and MAC keys, so that the resulting log file could be used to independently verify the correctness of all cryptographic operations performed by PuTTY. However, I haven't been able to convince myself that the security implications are acceptable. (It doesn't matter that this information would permit an attacker to decrypt the session, because the _already_ decrypted session is stored alongside it in the log file. And I'm not planning, under any circumstances, to log users' private keys. But gaining access to the log file while the session was still running would permit an attacker to _hijack_ the session, and that's the iffy bit.) [originally from svn r6835]
2006-08-29 23:07:11 +04:00
sshrawlogname, 'r', I(LGTYP_SSHRAW),
Finer granularity of config box handling. SSH packet logging should now not show up when it's meaningless (in PuTTYtel, in pterm, and in the middle of any non-SSH session), and the Connection panel is inhibited completely in pterm. [originally from svn r3146]
2003-04-26 18:35:34 +04:00
NULL);
}
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_filesel(s, "Log file name:", 'f',
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
NULL, true, "Select session log file name",
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
HELPCTX(logging_filename),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_filesel_handler, I(CONF_logfilename));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_text(s, "(Log file name can contain &Y, &M, &D for date,"
New formatting directive in logfile naming: &P for port number. Users have requested this from time to time, for distinguishing log file names when there's more than one SSH server running on different ports of the same host. Since we do take account of that possibility in other areas (e.g. we cache host keys indexed by (host,port) rather than just host), it doesn't seem unreasonable to do so here too.
2015-08-08 15:35:44 +03:00
" &T for time, &H for host name, and &P for port number)",
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
HELPCTX(logging_filename));
ctrl_radiobuttons(s, "What to do if the log file already exists:", 'e', 1,
HELPCTX(logging_exists),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler, I(CONF_logxfovr),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
"Always overwrite it", I(LGXF_OVR),
"Always append to the end of it", I(LGXF_APN),
"Ask the user every time", I(LGXF_ASK), NULL);
Abe Crabtree complains that flushing the log file as often as we do in 0.56 results in unacceptable performance for him on Win2000. Add a checkbox to revert to the old behaviour. [originally from svn r4988] [this svn revision also touched putty-wishlist]
2004-12-16 18:22:36 +03:00
ctrl_checkbox(s, "Flush log file frequently", 'u',
HELPCTX(logging_flush),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_logflush));
Fix shortcut clash in Windows builds. The 'Include header' option added in 822d2fd4c3 used the shortcut 'h', which clashed with the 'Help' button, causing an assertion failure.
2018-09-27 01:38:56 +03:00
ctrl_checkbox(s, "Include header", 'i',
Add option whether to include header when logging. It is useful to be able to exclude the header so that the log file can be used for realtime input to other programs such as Kst for plotting live data from sensors.
2018-09-26 13:48:11 +03:00
HELPCTX(logging_header),
conf_checkbox_handler, I(CONF_logheader));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
`ssh-log-pw-blank': known password fields are now omitted from SSH packet logs by default (although they can be included). There's also an option to remove session data, which is good both for privacy and for reducing the size of logfiles. [originally from svn r4593]
2004-10-02 04:33:27 +04:00
if ((midsession && protocol == PROT_SSH) ||
Turn Backend into a sensible classoid. Nearly every part of the code that ever handles a full backend structure has historically done it using a pair of pointer variables, one pointing at a constant struct full of function pointers, and the other pointing to a 'void *' state object that's passed to each of those. While I'm modernising the rest of the code, this seems like a good time to turn that into the same more or less type-safe and less cumbersome system as I'm using for other parts of the code, such as Socket, Plug, BinaryPacketProtocol and so forth: the Backend structure contains a vtable pointer, and a system of macro wrappers handles dispatching through that vtable.
2018-09-11 18:23:38 +03:00
(!midsession && backend_vt_from_proto(PROT_SSH))) {
`ssh-log-pw-blank': known password fields are now omitted from SSH packet logs by default (although they can be included). There's also an option to remove session data, which is good both for privacy and for reducing the size of logfiles. [originally from svn r4593]
2004-10-02 04:33:27 +04:00
s = ctrl_getset(b, "Session/Logging", "ssh",
"Options specific to SSH packet logging");
ctrl_checkbox(s, "Omit known password fields", 'k',
HELPCTX(logging_ssh_omit_password),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_logomitpass));
`ssh-log-pw-blank': known password fields are now omitted from SSH packet logs by default (although they can be included). There's also an option to remove session data, which is good both for privacy and for reducing the size of logfiles. [originally from svn r4593]
2004-10-02 04:33:27 +04:00
ctrl_checkbox(s, "Omit session data", 'd',
HELPCTX(logging_ssh_omit_data),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_logomitdata));
`ssh-log-pw-blank': known password fields are now omitted from SSH packet logs by default (although they can be included). There's also an option to remove session data, which is good both for privacy and for reducing the size of logfiles. [originally from svn r4593]
2004-10-02 04:33:27 +04:00
}
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* The Terminal panel.
*/
ctrl_settitle(b, "Terminal", "Options controlling the terminal emulation");
s = ctrl_getset(b, "Terminal", "general", "Set various terminal options");
ctrl_checkbox(s, "Auto wrap mode initially on", 'w',
HELPCTX(terminal_autowrap),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_wrap_mode));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "DEC Origin Mode initially on", 'd',
HELPCTX(terminal_decom),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_dec_om));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Implicit CR in every LF", 'r',
HELPCTX(terminal_lfhascr),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_lfhascr));
"CR implies LF" patch, based on one from Paul Coldrey. [originally from svn r7669]
2007-08-04 23:16:46 +04:00
ctrl_checkbox(s, "Implicit LF in every CR", 'f',
HELPCTX(terminal_crhaslf),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_crhaslf));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Use background colour to erase screen", 'e',
HELPCTX(terminal_bce),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_bce));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Enable blinking text", 'n',
HELPCTX(terminal_blink),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_blinktext));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_editbox(s, "Answerback to ^E:", 's', 100,
HELPCTX(terminal_answerback),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_answerback), I(1));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
s = ctrl_getset(b, "Terminal", "ldisc", "Line discipline options");
ctrl_radiobuttons(s, "Local echo:", 'l', 3,
HELPCTX(terminal_localecho),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler,I(CONF_localecho),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
"Auto", I(AUTO),
"Force on", I(FORCE_ON),
"Force off", I(FORCE_OFF), NULL);
ctrl_radiobuttons(s, "Local line editing:", 't', 3,
HELPCTX(terminal_localedit),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler,I(CONF_localedit),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
"Auto", I(AUTO),
"Force on", I(FORCE_ON),
"Force off", I(FORCE_OFF), NULL);
s = ctrl_getset(b, "Terminal", "printing", "Remote-controlled printing");
ctrl_combobox(s, "Printer to send ANSI printer output to:", 'p', 100,
HELPCTX(terminal_printing),
printerbox_handler, P(NULL), P(NULL));
/*
* The Terminal/Keyboard panel.
*/
ctrl_settitle(b, "Terminal/Keyboard",
"Options controlling the effects of keys");
s = ctrl_getset(b, "Terminal/Keyboard", "mappings",
"Change the sequences sent by:");
ctrl_radiobuttons(s, "The Backspace key", 'b', 2,
HELPCTX(keyboard_backspace),
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
conf_radiobutton_bool_handler,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
I(CONF_bksp_is_delete),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
"Control-H", I(0), "Control-? (127)", I(1), NULL);
ctrl_radiobuttons(s, "The Home and End keys", 'e', 2,
HELPCTX(keyboard_homeend),
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
conf_radiobutton_bool_handler,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
I(CONF_rxvt_homeend),
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
"Standard", I(false), "rxvt", I(true), NULL);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_radiobuttons(s, "The Function keys and keypad", 'f', 3,
HELPCTX(keyboard_funkeys),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler,
I(CONF_funky_type),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
"ESC[n~", I(0), "Linux", I(1), "Xterm R6", I(2),
"VT400", I(3), "VT100+", I(4), "SCO", I(5), NULL);
s = ctrl_getset(b, "Terminal/Keyboard", "appkeypad",
"Application keypad settings:");
ctrl_radiobuttons(s, "Initial state of cursor keys:", 'r', 3,
HELPCTX(keyboard_appcursor),
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
conf_radiobutton_bool_handler,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
I(CONF_app_cursor),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
"Normal", I(0), "Application", I(1), NULL);
ctrl_radiobuttons(s, "Initial state of numeric keypad:", 'n', 3,
HELPCTX(keyboard_appkeypad),
numeric_keypad_handler, P(NULL),
"Normal", I(0), "Application", I(1), "NetHack", I(2),
NULL);
/*
* The Terminal/Bell panel.
*/
ctrl_settitle(b, "Terminal/Bell",
"Options controlling the terminal bell");
s = ctrl_getset(b, "Terminal/Bell", "style", "Set the style of bell");
ctrl_radiobuttons(s, "Action to happen when a bell occurs:", 'b', 1,
HELPCTX(bell_style),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler, I(CONF_beep),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
"None (bell disabled)", I(BELL_DISABLED),
"Make default system alert sound", I(BELL_DEFAULT),
"Visual bell (flash window)", I(BELL_VISUAL), NULL);
s = ctrl_getset(b, "Terminal/Bell", "overload",
"Control the bell overload behaviour");
ctrl_checkbox(s, "Bell is temporarily disabled when over-used", 'd',
HELPCTX(bell_overload),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_bellovl));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_editbox(s, "Over-use means this many bells...", 'm', 20,
HELPCTX(bell_overload),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_bellovl_n), I(-1));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_editbox(s, "... in this many seconds", 't', 20,
HELPCTX(bell_overload),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_bellovl_t),
The divisor in the bell timing boxes should be TICKSPERSEC, not 1000. [originally from svn r2934]
2003-03-15 00:18:13 +03:00
I(-TICKSPERSEC));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_text(s, "The bell is re-enabled after a few seconds of silence.",
HELPCTX(bell_overload));
ctrl_editbox(s, "Seconds of silence required", 's', 20,
HELPCTX(bell_overload),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_bellovl_s),
The divisor in the bell timing boxes should be TICKSPERSEC, not 1000. [originally from svn r2934]
2003-03-15 00:18:13 +03:00
I(-TICKSPERSEC));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* The Terminal/Features panel.
*/
ctrl_settitle(b, "Terminal/Features",
"Enabling and disabling advanced terminal features");
s = ctrl_getset(b, "Terminal/Features", "main", NULL);
ctrl_checkbox(s, "Disable application cursor keys mode", 'u',
HELPCTX(features_application),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_no_applic_c));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Disable application keypad mode", 'k',
HELPCTX(features_application),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_no_applic_k));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Disable xterm-style mouse reporting", 'x',
HELPCTX(features_mouse),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_no_mouse_rep));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Disable remote-controlled terminal resizing", 's',
HELPCTX(features_resize),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_no_remote_resize));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Disable switching to alternate terminal screen", 'w',
HELPCTX(features_altscreen),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_no_alt_screen));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Disable remote-controlled window title changing", 't',
HELPCTX(features_retitle),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_no_remote_wintitle));
Patch inspired by one from Daniel Silverstone in Debian bug #229232: We now have an option where a remote window title query returns a well-formed response containing the empty string. This should keep stop any server-side application that was expecting a response from hanging, while not permitting the response to be influenced by an attacker. We also retain the ability to stay schtum. The existing checkbox has thus grown into a set of radio buttons. I've changed the default to the "empty string" response, even in the backward- compatibility mode of loading old settings, which is a change in behaviour; any users who want the old behaviour back will have to explicitly select it. I think this is probably the Right Thing. (The only drawback I can think of is that an attacker could still potentially use the relevant fixed strings for mischief, but we already have other, similar reports.) [originally from svn r7043]
2006-12-31 18:33:33 +03:00
ctrl_radiobuttons(s, "Response to remote title query (SECURITY):", 'q', 3,
HELPCTX(features_qtitle),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler,
I(CONF_remote_qtitle_action),
Patch inspired by one from Daniel Silverstone in Debian bug #229232: We now have an option where a remote window title query returns a well-formed response containing the empty string. This should keep stop any server-side application that was expecting a response from hanging, while not permitting the response to be influenced by an attacker. We also retain the ability to stay schtum. The existing checkbox has thus grown into a set of radio buttons. I've changed the default to the "empty string" response, even in the backward- compatibility mode of loading old settings, which is a change in behaviour; any users who want the old behaviour back will have to explicitly select it. I think this is probably the Right Thing. (The only drawback I can think of is that an attacker could still potentially use the relevant fixed strings for mischief, but we already have other, similar reports.) [originally from svn r7043]
2006-12-31 18:33:33 +03:00
"None", I(TITLE_NONE),
"Empty string", I(TITLE_EMPTY),
"Window title", I(TITLE_REAL), NULL);
Cosmetic rearrangement of Terminal/Features panel. Move "Response to remote title query" next to "Disable remote-controlled window title changing"; that seems more logical, and matches the documentation.
2019-04-19 17:30:35 +03:00
ctrl_checkbox(s, "Disable remote-controlled clearing of scrollback", 'e',
HELPCTX(features_clearscroll),
conf_checkbox_handler,
I(CONF_no_remote_clearscroll));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Disable destructive backspace on server sending ^?",'b',
HELPCTX(features_dbackspace),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_no_dbackspace));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Disable remote-controlled character set configuration",
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
'r', HELPCTX(features_charset), conf_checkbox_handler,
I(CONF_no_remote_charset));
At last! After much delay, much faffing back and forth, and much enhancement and fiddling, I have now massaged Arabeyes' first patch into a form I'm happy to check in. Phew. [originally from svn r4236]
2004-05-22 14:36:50 +04:00
ctrl_checkbox(s, "Disable Arabic text shaping",
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
'l', HELPCTX(features_arabicshaping), conf_checkbox_handler,
Rename term->bidi and term->arabicshaping. Those two flags had the opposite sense to what you might expect: each one is the value of the Conf entry corresponding to the checkbox that _disables_ the corresponding terminal feature. So term->bidi is true if and only if bidi is _off_. I think that confusion of naming probably contributed to the control- flow error fixed in the previous commit, just by increasing cognitive load until I couldn't remember which flags were set where any more! So now I've renamed the two fields of Terminal, and the corresponding Conf keywords, to be called "no_bidi" and "no_arabicshaping", in line with other 'disable this feature' flags, so that it's clear what the sense should be.
2019-03-27 00:13:19 +03:00
I(CONF_no_arabicshaping));
At last! After much delay, much faffing back and forth, and much enhancement and fiddling, I have now massaged Arabeyes' first patch into a form I'm happy to check in. Phew. [originally from svn r4236]
2004-05-22 14:36:50 +04:00
ctrl_checkbox(s, "Disable bidirectional text display",
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
'd', HELPCTX(features_bidi), conf_checkbox_handler,
Rename term->bidi and term->arabicshaping. Those two flags had the opposite sense to what you might expect: each one is the value of the Conf entry corresponding to the checkbox that _disables_ the corresponding terminal feature. So term->bidi is true if and only if bidi is _off_. I think that confusion of naming probably contributed to the control- flow error fixed in the previous commit, just by increasing cognitive load until I couldn't remember which flags were set where any more! So now I've renamed the two fields of Terminal, and the corresponding Conf keywords, to be called "no_bidi" and "no_arabicshaping", in line with other 'disable this feature' flags, so that it's clear what the sense should be.
2019-03-27 00:13:19 +03:00
I(CONF_no_bidi));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* The Window panel.
*/
Now that we have `appname', make much wider use of it. In particular, the config box uses it in place of the word `PuTTY', which means mid-session reconfig in pterm will look less strange once I implement it. Also, while I'm at it, I've personalised all the dialog boxes and menu items and suchlike so that PuTTYtel actually claims to be PuTTYtel rather than PuTTY. [originally from svn r3074]
2003-04-06 18:11:33 +04:00
str = dupprintf("Options controlling %s's window", appname);
ctrl_settitle(b, "Window", str);
sfree(str);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
s = ctrl_getset(b, "Window", "size", "Set the size of the window");
ctrl_columns(s, 2, 50, 50);
c = ctrl_editbox(s, "Columns", 'm', 100,
HELPCTX(window_size),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_width), I(-1));
Swap order of `Columns' and `Rows' in the config dialog, to make it consistent with sizetip.c (and more nebulous conventions). [originally from svn r7196]
2007-02-02 02:24:30 +03:00
c->generic.column = 0;
c = ctrl_editbox(s, "Rows", 'r', 100,
HELPCTX(window_size),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_height),I(-1));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
c->generic.column = 1;
ctrl_columns(s, 1, 100);
s = ctrl_getset(b, "Window", "scrollback",
"Control the scrollback in the window");
ctrl_editbox(s, "Lines of scrollback", 's', 50,
HELPCTX(window_scrollback),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_savelines), I(-1));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Display scrollbar", 'd',
HELPCTX(window_scrollback),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_scrollbar));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Reset scrollback on keypress", 'k',
HELPCTX(window_scrollback),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_scroll_on_key));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Reset scrollback on display activity", 'p',
HELPCTX(window_scrollback),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_scroll_on_disp));
Richard B's patch to push erased text into the scrollback on ESC[2J clears, and also to temporarily push the primary screen contents into the scrollback while the alternate screen is active and bring it back afterwards. [originally from svn r2910]
2003-03-06 15:51:12 +03:00
ctrl_checkbox(s, "Push erased text into scrollback", 'e',
HELPCTX(window_erased),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_erase_to_scrollback));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* The Window/Appearance panel.
*/
Now that we have `appname', make much wider use of it. In particular, the config box uses it in place of the word `PuTTY', which means mid-session reconfig in pterm will look less strange once I implement it. Also, while I'm at it, I've personalised all the dialog boxes and menu items and suchlike so that PuTTYtel actually claims to be PuTTYtel rather than PuTTY. [originally from svn r3074]
2003-04-06 18:11:33 +04:00
str = dupprintf("Configure the appearance of %s's window", appname);
ctrl_settitle(b, "Window/Appearance", str);
sfree(str);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
s = ctrl_getset(b, "Window/Appearance", "cursor",
"Adjust the use of the cursor");
ctrl_radiobuttons(s, "Cursor appearance:", NO_SHORTCUT, 3,
HELPCTX(appearance_cursor),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler,
I(CONF_cursor_type),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
"Block", 'l', I(0),
"Underline", 'u', I(1),
"Vertical line", 'v', I(2), NULL);
ctrl_checkbox(s, "Cursor blinks", 'b',
HELPCTX(appearance_cursor),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_blink_cur));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
s = ctrl_getset(b, "Window/Appearance", "font",
"Font settings");
ctrl_fontsel(s, "Font used in the terminal window", 'n',
HELPCTX(appearance_font),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_fontsel_handler, I(CONF_font));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
s = ctrl_getset(b, "Window/Appearance", "mouse",
"Adjust the use of the mouse pointer");
ctrl_checkbox(s, "Hide mouse pointer when typing in window", 'p',
HELPCTX(appearance_hidemouse),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_hide_mouseptr));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
s = ctrl_getset(b, "Window/Appearance", "border",
"Adjust the window border");
Add keyboard accelerators for IPv4/IPv6 selections options. (Also for `window_border'.) [originally from svn r5610]
2005-04-07 05:42:36 +04:00
ctrl_editbox(s, "Gap between text and window edge:", 'e', 20,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
HELPCTX(appearance_border),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler,
I(CONF_window_border), I(-1));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* The Window/Behaviour panel.
*/
Now that we have `appname', make much wider use of it. In particular, the config box uses it in place of the word `PuTTY', which means mid-session reconfig in pterm will look less strange once I implement it. Also, while I'm at it, I've personalised all the dialog boxes and menu items and suchlike so that PuTTYtel actually claims to be PuTTYtel rather than PuTTY. [originally from svn r3074]
2003-04-06 18:11:33 +04:00
str = dupprintf("Configure the behaviour of %s's window", appname);
ctrl_settitle(b, "Window/Behaviour", str);
sfree(str);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
s = ctrl_getset(b, "Window/Behaviour", "title",
"Adjust the behaviour of the window title");
ctrl_editbox(s, "Window title:", 't', 100,
HELPCTX(appearance_title),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_wintitle), I(1));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Separate window and icon titles", 'i',
HELPCTX(appearance_title),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CHECKBOX_INVERT | CONF_win_name_always));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
s = ctrl_getset(b, "Window/Behaviour", "main", NULL);
ctrl_checkbox(s, "Warn before closing window", 'w',
HELPCTX(behaviour_closewarn),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_warn_on_close));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* The Window/Translation panel.
*/
ctrl_settitle(b, "Window/Translation",
"Options controlling character set translation");
s = ctrl_getset(b, "Window/Translation", "trans",
Rejig the Translation panel controls and documentation to remove the emphasis on received data. Experiment and suggestion suggest that the character set configuration applies equally to keystrokes sent to the server, or at least that that's close enough to being true that we should document it as a first approximation. [originally from svn r8209]
2008-10-14 02:34:57 +04:00
"Character set translation");
ctrl_combobox(s, "Remote character set:",
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
'r', 100, HELPCTX(translation_codepage),
codepage_handler, P(NULL), P(NULL));
Add an option to use wcwidth_cjk() instead of wcwidth(), as several people have asked for it. [originally from svn r5542]
2005-03-23 02:20:23 +03:00
s = ctrl_getset(b, "Window/Translation", "tweaks", NULL);
ctrl_checkbox(s, "Treat CJK ambiguous characters as wide", 'w',
HELPCTX(translation_cjk_ambig_wide),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_cjk_ambig_wide));
Add an option to use wcwidth_cjk() instead of wcwidth(), as several people have asked for it. [originally from svn r5542]
2005-03-23 02:20:23 +03:00
Move the `translation of line drawing characters when pasting' option from the Selection panel to the Translation panel (where it fits at least as well). This frees a line in the Selection panel which I'm about to use for an additional mouse handling option. [originally from svn r3564]
2003-11-20 21:33:22 +03:00
str = dupprintf("Adjust how %s handles line drawing characters", appname);
Now that we have `appname', make much wider use of it. In particular, the config box uses it in place of the word `PuTTY', which means mid-session reconfig in pterm will look less strange once I implement it. Also, while I'm at it, I've personalised all the dialog boxes and menu items and suchlike so that PuTTYtel actually claims to be PuTTYtel rather than PuTTY. [originally from svn r3074]
2003-04-06 18:11:33 +04:00
s = ctrl_getset(b, "Window/Translation", "linedraw", str);
sfree(str);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_radiobuttons(s, "Handling of line drawing characters:", NO_SHORTCUT,1,
HELPCTX(translation_linedraw),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler,
I(CONF_vtmode),
Make the `vtmode' config option work under X. In the process I've had to move another of its values out into wincfg.c - paradoxically, this was the `font has X encoding' option! (Because the Unix font handling code expects to be able to tell for _itself_ whether it has a font with X-encoded line drawing glyphs.) [originally from svn r3145]
2003-04-26 18:22:42 +04:00
"Use Unicode line drawing code points",'u',I(VT_UNICODE),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
"Poor man's line drawing (+, - and |)",'p',I(VT_POORMAN),
Make the `vtmode' config option work under X. In the process I've had to move another of its values out into wincfg.c - paradoxically, this was the `font has X encoding' option! (Because the Unix font handling code expects to be able to tell for _itself_ whether it has a font with X-encoded line drawing glyphs.) [originally from svn r3145]
2003-04-26 18:22:42 +04:00
NULL);
Move the `translation of line drawing characters when pasting' option from the Selection panel to the Translation panel (where it fits at least as well). This frees a line in the Selection panel which I'm about to use for an additional mouse handling option. [originally from svn r3564]
2003-11-20 21:33:22 +03:00
ctrl_checkbox(s, "Copy and paste line drawing characters as lqqqk",'d',
HELPCTX(selection_linedraw),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_rawcnp));
Option to support VT100 line drawing in UTF-8 mode. Thanks to Jiri Kaspar for sending this patch (apart from the new docs section, which is in my own words), which implements a feature we've had as a wishlist item ('utf8-plus-vt100') for a long time. I was actually surprised it was possible to implement it in so few lines of code! I'd forgotten, or possibly never noticed in the first place, that even in UTF-8 mode PuTTY not only accepts but still _processes_ all the ISO 2022 control sequences and shift characters, and keeps running track of all the same state in term->cset and term->cset_attrs that it tracks in IS0-2022-enabled modes. It's just that in UTF-8 mode, at the very last minute when a character+attribute pair is about to be written into the terminal's character buffer, it deliberately ignores the contents of those variables. So all that was needed was a new flag checked at that last moment which causes it not quite to ignore them after all, and bingo, utf8-plus-vt100 is supported. And it works no matter which ISO 2022 sequences you're using; whether you're using ESC ( 0 to select the line drawing set directly into GL and ESC ( B to get back when you're done, or whether you send a preliminary ESC ( B ESC ) 0 to get GL/GR to be ASCII and line drawing respectively so you can use SI and SO as one-byte mode switches thereafter, both work just as well. This implementation strategy has a couple of consequences, which I don't think matter very much one way or the other but I document them just in case they turn out to be important later: - if an application expecting this mode has already filled your terminal window with lqqqqqqqqk, then enabling this mode in Change Settings won't retroactively turn them into the line drawing characters you wanted, because no memory is preserved in the screen buffer of what the ISO 2022 state was when they were printed. So the application still has to do a screen refresh. - on the other hand, if you already sent the ESC ( 0 or whatever to put the terminal _into_ line drawing mode, and then you turn on this mode in Change Settings, you _will_ still be in line drawing mode, because the system _does_ remember your current ISO 2022 state at all times, whether it's currently applying it to output printing characters or not.
2018-05-12 10:43:52 +03:00
ctrl_checkbox(s, "Enable VT100 line drawing even in UTF-8 mode",'8',
HELPCTX(translation_utf8linedraw),
conf_checkbox_handler, I(CONF_utf8linedraw));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* The Window/Selection panel.
*/
ctrl_settitle(b, "Window/Selection", "Options controlling copy and paste");
s = ctrl_getset(b, "Window/Selection", "mouse",
"Control use of mouse");
ctrl_checkbox(s, "Shift overrides application's use of mouse", 'p',
HELPCTX(selection_shiftdrag),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_mouse_override));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_radiobuttons(s,
"Default selection mode (Alt+drag does the other one):",
NO_SHORTCUT, 2,
HELPCTX(selection_rect),
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
conf_radiobutton_bool_handler,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
I(CONF_rect_select),
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
"Normal", 'n', I(false),
"Rectangular block", 'r', I(true), NULL);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
Add GUI configuration for choice of clipboards. On all platforms, you can now configure which clipboard the mouse pastes from, which clipboard Ctrl-Ins and Shift-Ins access, and which Ctrl-Shift-C and Ctrl-Shift-V access. In each case, the options are: - nothing at all - a clipboard which is implicitly written by the act of mouse selection (the PRIMARY selection on X, CLIP_LOCAL everywhere else) - the standard clipboard written by explicit copy/paste UI actions (CLIPBOARD on X, the unique system clipboard elsewhere). Also, you can control whether selecting text with the mouse _also_ writes to the explicitly accessed clipboard. The wording of the various messages changes between platforms, but the basic UI shape is the same everywhere.
2017-12-10 20:16:50 +03:00
s = ctrl_getset(b, "Window/Selection", "clipboards",
"Assign copy/paste actions to clipboards");
ctrl_checkbox(s, "Auto-copy selected text to "
CLIPNAME_EXPLICIT_OBJECT,
NO_SHORTCUT, HELPCTX(selection_autocopy),
conf_checkbox_handler, I(CONF_mouseautocopy));
Support custom clipboard names under X. This required me to turn the drop-lists into combo boxes and add an extra string-typed Conf setting alongside each enumerated value.
2017-12-17 21:44:27 +03:00
clipboard_control(s, "Mouse paste action:", NO_SHORTCUT, 60,
HELPCTX(selection_clipactions),
CONF_mousepaste, CONF_mousepaste_custom);
clipboard_control(s, "{Ctrl,Shift} + Ins:", NO_SHORTCUT, 60,
HELPCTX(selection_clipactions),
CONF_ctrlshiftins, CONF_ctrlshiftins_custom);
clipboard_control(s, "Ctrl + Shift + {C,V}:", NO_SHORTCUT, 60,
HELPCTX(selection_clipactions),
CONF_ctrlshiftcv, CONF_ctrlshiftcv_custom);
Add GUI configuration for choice of clipboards. On all platforms, you can now configure which clipboard the mouse pastes from, which clipboard Ctrl-Ins and Shift-Ins access, and which Ctrl-Shift-C and Ctrl-Shift-V access. In each case, the options are: - nothing at all - a clipboard which is implicitly written by the act of mouse selection (the PRIMARY selection on X, CLIP_LOCAL everywhere else) - the standard clipboard written by explicit copy/paste UI actions (CLIPBOARD on X, the unique system clipboard elsewhere). Also, you can control whether selecting text with the mouse _also_ writes to the explicitly accessed clipboard. The wording of the various messages changes between platforms, but the basic UI shape is the same everywhere.
2017-12-10 20:16:50 +03:00
Sanitise control characters from paste data by default. This is a mild security measure against malicious clipboard-writing. It's only mild, because of course there are situations in which even a sanitised paste could be successfully malicious (imagine someone managing to write the traditional 'rm -rf' command into your clipboard when you were going to paste to a shell prompt); but it at least allows pasting into typical text editors without also allowing the control sequence that exits the editor UI and returns to the shell prompt. This is a configurable option, because there's no well defined line to be drawn between acceptable and unacceptable pastes, and it's very plausible that users will have sensible use cases for pasting things outside the list of permitted characters, or cases in which they know they trust the clipboard-writer. I for one certainly find it useful on occasion to deliberately construct a paste containing control sequences that automate a terminal-based UI. While I'm at it, when bracketed paste mode is enabled, we also prevent pasting of data that includes the 'end bracketed paste' sequence somewhere in the middle. I really _hope_ nobody was treating bracketed paste mode as a key part of their security boundary, but then again, I also can't imagine that anyone had an actually sensible use case for deliberately making a bracketed paste be only partly bracketed, and it's an easy change while I'm messing about in this area anyway.
2018-03-11 20:40:42 +03:00
s = ctrl_getset(b, "Window/Selection", "paste",
Rename the 'Words' config panel to 'Copy'. Now its remit is widened to include not just the character-classes list box, but also anything else related specifically to _copying_ rather than _pasting_, i.e. the terminal -> clipboard direction. This allows me to move the Windows-specific 'write RTF to clipboard' option into the newly named Copy panel, which gets it _out_ of the main Selection panel which had just overflowed due to the new option added by the previous commit. (It looks a little asymmetric that there's no corresponding Paste panel now! But since it would currently contain a single checkbox, I'll wait until there's more to put in it...)
2018-03-11 21:57:13 +03:00
"Control pasting of text from clipboard to terminal");
Sanitise control characters from paste data by default. This is a mild security measure against malicious clipboard-writing. It's only mild, because of course there are situations in which even a sanitised paste could be successfully malicious (imagine someone managing to write the traditional 'rm -rf' command into your clipboard when you were going to paste to a shell prompt); but it at least allows pasting into typical text editors without also allowing the control sequence that exits the editor UI and returns to the shell prompt. This is a configurable option, because there's no well defined line to be drawn between acceptable and unacceptable pastes, and it's very plausible that users will have sensible use cases for pasting things outside the list of permitted characters, or cases in which they know they trust the clipboard-writer. I for one certainly find it useful on occasion to deliberately construct a paste containing control sequences that automate a terminal-based UI. While I'm at it, when bracketed paste mode is enabled, we also prevent pasting of data that includes the 'end bracketed paste' sequence somewhere in the middle. I really _hope_ nobody was treating bracketed paste mode as a key part of their security boundary, but then again, I also can't imagine that anyone had an actually sensible use case for deliberately making a bracketed paste be only partly bracketed, and it's an easy change while I'm messing about in this area anyway.
2018-03-11 20:40:42 +03:00
ctrl_checkbox(s, "Permit control characters in pasted text",
Hook up Windows help context for 'Permit control characters in pasted text'
2018-03-28 01:10:39 +03:00
NO_SHORTCUT, HELPCTX(selection_pastectrl),
Sanitise control characters from paste data by default. This is a mild security measure against malicious clipboard-writing. It's only mild, because of course there are situations in which even a sanitised paste could be successfully malicious (imagine someone managing to write the traditional 'rm -rf' command into your clipboard when you were going to paste to a shell prompt); but it at least allows pasting into typical text editors without also allowing the control sequence that exits the editor UI and returns to the shell prompt. This is a configurable option, because there's no well defined line to be drawn between acceptable and unacceptable pastes, and it's very plausible that users will have sensible use cases for pasting things outside the list of permitted characters, or cases in which they know they trust the clipboard-writer. I for one certainly find it useful on occasion to deliberately construct a paste containing control sequences that automate a terminal-based UI. While I'm at it, when bracketed paste mode is enabled, we also prevent pasting of data that includes the 'end bracketed paste' sequence somewhere in the middle. I really _hope_ nobody was treating bracketed paste mode as a key part of their security boundary, but then again, I also can't imagine that anyone had an actually sensible use case for deliberately making a bracketed paste be only partly bracketed, and it's an easy change while I'm messing about in this area anyway.
2018-03-11 20:40:42 +03:00
conf_checkbox_handler, I(CONF_paste_controls));
Move char-class list box out into a new config panel. This makes space in the Selection panel (at least on Windows; it wasn't overfull on Unix) to add a new set of config options controlling the mapping of UI actions to clipboards. (A possible future advantage of having spare space in this new Words panel is that there's room to add controls for context-sensitive special-casing, e.g. I'd quite like ':' to be treated differently when it appears as part of "http://".)
2017-12-16 14:13:31 +03:00
/*
Rename the 'Words' config panel to 'Copy'. Now its remit is widened to include not just the character-classes list box, but also anything else related specifically to _copying_ rather than _pasting_, i.e. the terminal -> clipboard direction. This allows me to move the Windows-specific 'write RTF to clipboard' option into the newly named Copy panel, which gets it _out_ of the main Selection panel which had just overflowed due to the new option added by the previous commit. (It looks a little asymmetric that there's no corresponding Paste panel now! But since it would currently contain a single checkbox, I'll wait until there's more to put in it...)
2018-03-11 21:57:13 +03:00
* The Window/Selection/Copy panel.
Move char-class list box out into a new config panel. This makes space in the Selection panel (at least on Windows; it wasn't overfull on Unix) to add a new set of config options controlling the mapping of UI actions to clipboards. (A possible future advantage of having spare space in this new Words panel is that there's room to add controls for context-sensitive special-casing, e.g. I'd quite like ':' to be treated differently when it appears as part of "http://".)
2017-12-16 14:13:31 +03:00
*/
Rename the 'Words' config panel to 'Copy'. Now its remit is widened to include not just the character-classes list box, but also anything else related specifically to _copying_ rather than _pasting_, i.e. the terminal -> clipboard direction. This allows me to move the Windows-specific 'write RTF to clipboard' option into the newly named Copy panel, which gets it _out_ of the main Selection panel which had just overflowed due to the new option added by the previous commit. (It looks a little asymmetric that there's no corresponding Paste panel now! But since it would currently contain a single checkbox, I'll wait until there's more to put in it...)
2018-03-11 21:57:13 +03:00
ctrl_settitle(b, "Window/Selection/Copy",
"Options controlling copying from terminal to clipboard");
Move char-class list box out into a new config panel. This makes space in the Selection panel (at least on Windows; it wasn't overfull on Unix) to add a new set of config options controlling the mapping of UI actions to clipboards. (A possible future advantage of having spare space in this new Words panel is that there's room to add controls for context-sensitive special-casing, e.g. I'd quite like ':' to be treated differently when it appears as part of "http://".)
2017-12-16 14:13:31 +03:00
Rename the 'Words' config panel to 'Copy'. Now its remit is widened to include not just the character-classes list box, but also anything else related specifically to _copying_ rather than _pasting_, i.e. the terminal -> clipboard direction. This allows me to move the Windows-specific 'write RTF to clipboard' option into the newly named Copy panel, which gets it _out_ of the main Selection panel which had just overflowed due to the new option added by the previous commit. (It looks a little asymmetric that there's no corresponding Paste panel now! But since it would currently contain a single checkbox, I'll wait until there's more to put in it...)
2018-03-11 21:57:13 +03:00
s = ctrl_getset(b, "Window/Selection/Copy", "charclass",
Move char-class list box out into a new config panel. This makes space in the Selection panel (at least on Windows; it wasn't overfull on Unix) to add a new set of config options controlling the mapping of UI actions to clipboards. (A possible future advantage of having spare space in this new Words panel is that there's room to add controls for context-sensitive special-casing, e.g. I'd quite like ':' to be treated differently when it appears as part of "http://".)
2017-12-16 14:13:31 +03:00
"Classes of character that group together");
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ccd = (struct charclass_data *)
ctrl_alloc(b, sizeof(struct charclass_data));
ccd->listbox = ctrl_listbox(s, "Character classes:", 'e',
Document 'Permit control characters in pasted text' And the consequent GUI rearrangements.
2018-03-24 18:35:46 +03:00
HELPCTX(copy_charclasses),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
charclass_handler, P(ccd));
ccd->listbox->listbox.multisel = 1;
ccd->listbox->listbox.ncols = 4;
Introduced wrapper macros snew(), snewn() and sresize() for the malloc functions, which automatically cast to the same type they're allocating the size of. Should prevent any future errors involving mallocing the size of the wrong structure type, and will also make life easier if we ever need to turn the PuTTY core code from real C into C++-friendly C. I haven't touched the Mac frontend in this checkin because I couldn't compile or test it. [originally from svn r3014]
2003-03-29 19:14:26 +03:00
ccd->listbox->listbox.percentages = snewn(4, int);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ccd->listbox->listbox.percentages[0] = 15;
ccd->listbox->listbox.percentages[1] = 25;
ccd->listbox->listbox.percentages[2] = 20;
ccd->listbox->listbox.percentages[3] = 40;
ctrl_columns(s, 2, 67, 33);
ccd->editbox = ctrl_editbox(s, "Set to class", 't', 50,
Document 'Permit control characters in pasted text' And the consequent GUI rearrangements.
2018-03-24 18:35:46 +03:00
HELPCTX(copy_charclasses),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
charclass_handler, P(ccd), P(NULL));
ccd->editbox->generic.column = 0;
ccd->button = ctrl_pushbutton(s, "Set", 's',
Document 'Permit control characters in pasted text' And the consequent GUI rearrangements.
2018-03-24 18:35:46 +03:00
HELPCTX(copy_charclasses),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
charclass_handler, P(ccd));
ccd->button->generic.column = 1;
ctrl_columns(s, 1, 100);
/*
* The Window/Colours panel.
*/
ctrl_settitle(b, "Window/Colours", "Options controlling use of colours");
s = ctrl_getset(b, "Window/Colours", "general",
"General options for colour usage");
DJSD requests a force-monochrome option for users who dislike angry- fruit-salad applications :-) [originally from svn r4762]
2004-11-09 20:57:32 +03:00
ctrl_checkbox(s, "Allow terminal to specify ANSI colours", 'i',
HELPCTX(colours_ansi),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_ansi_colour));
Implement xterm 256-colour mode. [originally from svn r4917] [this svn revision also touched putty-wishlist]
2004-11-28 18:13:34 +03:00
ctrl_checkbox(s, "Allow terminal to use xterm 256-colour mode", '2',
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
HELPCTX(colours_xterm256), conf_checkbox_handler,
I(CONF_xterm_256_colour));
Make terminal true-colour mode configurable. I know some users don't like any colour _at all_, and we have a separate option to turn off xterm-style 256-colour sequences, so it seems remiss not to have an option to disable true colour as well.
2017-10-05 22:27:27 +03:00
ctrl_checkbox(s, "Allow terminal to use 24-bit colours", '4',
HELPCTX(colours_truecolour), conf_checkbox_handler,
I(CONF_true_colour));
Introduce a third setting for the 'bold as colour' mode, which lets you both brighten the colour _and_ bold the font at the same time. (Fixes 'bold-font-colour' and Debian #193352.) [originally from svn r9559]
2012-06-09 19:09:22 +04:00
ctrl_radiobuttons(s, "Indicate bolded text by changing:", 'b', 3,
HELPCTX(colours_bold),
conf_radiobutton_handler, I(CONF_bold_style),
"The font", I(1),
"The colour", I(2),
"Both", I(3),
NULL);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
Now that we have `appname', make much wider use of it. In particular, the config box uses it in place of the word `PuTTY', which means mid-session reconfig in pterm will look less strange once I implement it. Also, while I'm at it, I've personalised all the dialog boxes and menu items and suchlike so that PuTTYtel actually claims to be PuTTYtel rather than PuTTY. [originally from svn r3074]
2003-04-06 18:11:33 +04:00
str = dupprintf("Adjust the precise colours %s displays", appname);
s = ctrl_getset(b, "Window/Colours", "adjust", str);
sfree(str);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_text(s, "Select a colour from the list, and then click the"
" Modify button to change its appearance.",
HELPCTX(colours_config));
ctrl_columns(s, 2, 67, 33);
cd = (struct colour_data *)ctrl_alloc(b, sizeof(struct colour_data));
cd->listbox = ctrl_listbox(s, "Select a colour to adjust:", 'u',
HELPCTX(colours_config), colour_handler, P(cd));
cd->listbox->generic.column = 0;
The GTK colour selector does not provide full 8-bit resolution in the RGB values (it deals in floats with 2 d.p. instead). Hence I've replaced the static RGB text item in the Colours panel with three little edit boxes, so that a user can type in exact 0-255 RGB values if necessary. This should have the additional advantage of being quicker than faffing with the colour selector if you already know exactly what you want and are in a hurry! [originally from svn r2978]
2003-03-22 14:07:59 +03:00
cd->listbox->listbox.height = 7;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
c = ctrl_text(s, "RGB value:", HELPCTX(colours_config));
c->generic.column = 1;
The GTK colour selector does not provide full 8-bit resolution in the RGB values (it deals in floats with 2 d.p. instead). Hence I've replaced the static RGB text item in the Colours panel with three little edit boxes, so that a user can type in exact 0-255 RGB values if necessary. This should have the additional advantage of being quicker than faffing with the colour selector if you already know exactly what you want and are in a hurry! [originally from svn r2978]
2003-03-22 14:07:59 +03:00
cd->redit = ctrl_editbox(s, "Red", 'r', 50, HELPCTX(colours_config),
colour_handler, P(cd), P(NULL));
cd->redit->generic.column = 1;
cd->gedit = ctrl_editbox(s, "Green", 'n', 50, HELPCTX(colours_config),
colour_handler, P(cd), P(NULL));
cd->gedit->generic.column = 1;
cd->bedit = ctrl_editbox(s, "Blue", 'e', 50, HELPCTX(colours_config),
colour_handler, P(cd), P(NULL));
cd->bedit->generic.column = 1;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
cd->button = ctrl_pushbutton(s, "Modify", 'm', HELPCTX(colours_config),
colour_handler, P(cd));
cd->button->generic.column = 1;
ctrl_columns(s, 1, 100);
/*
Finer granularity of config box handling. SSH packet logging should now not show up when it's meaningless (in PuTTYtel, in pterm, and in the middle of any non-SSH session), and the Connection panel is inhibited completely in pterm. [originally from svn r3146]
2003-04-26 18:35:34 +04:00
* The Connection panel. This doesn't show up if we're in a
* non-network utility such as pterm. We tell this by being
* passed a protocol < 0.
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
*/
Finer granularity of config box handling. SSH packet logging should now not show up when it's meaningless (in PuTTYtel, in pterm, and in the middle of any non-SSH session), and the Connection panel is inhibited completely in pterm. [originally from svn r3146]
2003-04-26 18:35:34 +04:00
if (protocol >= 0) {
ctrl_settitle(b, "Connection", "Options controlling the connection");
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
s = ctrl_getset(b, "Connection", "keepalive",
"Sending of null packets to keep session active");
ctrl_editbox(s, "Seconds between keepalives (0 to turn off)", 'k', 20,
HELPCTX(connection_keepalive),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_ping_interval),
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
I(-1));
Finer granularity of config box handling. SSH packet logging should now not show up when it's meaningless (in PuTTYtel, in pterm, and in the middle of any non-SSH session), and the Connection panel is inhibited completely in pterm. [originally from svn r3146]
2003-04-26 18:35:34 +04:00
if (!midsession) {
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
s = ctrl_getset(b, "Connection", "tcp",
"Low-level TCP connection options");
ctrl_checkbox(s, "Disable Nagle's algorithm (TCP_NODELAY option)",
'n', HELPCTX(connection_nodelay),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_tcp_nodelay));
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
ctrl_checkbox(s, "Enable TCP keepalives (SO_KEEPALIVE option)",
'p', HELPCTX(connection_tcpkeepalive),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_tcp_keepalives));
I've changed my mind about what the IP version selection options in the config should do when IPv6 is configured out. They shouldn't sit there looking silly with only `Auto' and `IPv4' settings: they should instead be completely absent. I had thought the former was acceptable since IPv4-only was a configuration that people should only be using if their compilers didn't support IPv6, but now it occurs to me that ports to fundamentally non-IPv6-supporting platforms are not implausible, and on such ports the presence of a vestigial config option under the _standard_ build conditions would be a low-quality solution. [originally from svn r5084]
2005-01-09 14:44:21 +03:00
#ifndef NO_IPV6
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
s = ctrl_getset(b, "Connection", "ipversion",
"Internet protocol version");
I've changed my mind about what the IP version selection options in the config should do when IPv6 is configured out. They shouldn't sit there looking silly with only `Auto' and `IPv4' settings: they should instead be completely absent. I had thought the former was acceptable since IPv4-only was a configuration that people should only be using if their compilers didn't support IPv6, but now it occurs to me that ports to fundamentally non-IPv6-supporting platforms are not implausible, and on such ports the presence of a vestigial config option under the _standard_ build conditions would be a low-quality solution. [originally from svn r5084]
2005-01-09 14:44:21 +03:00
ctrl_radiobuttons(s, NULL, NO_SHORTCUT, 3,
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
HELPCTX(connection_ipversion),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler,
I(CONF_addressfamily),
Add keyboard accelerators for IPv4/IPv6 selections options. (Also for `window_border'.) [originally from svn r5610]
2005-04-07 05:42:36 +04:00
"Auto", 'u', I(ADDRTYPE_UNSPEC),
"IPv4", '4', I(ADDRTYPE_IPV4),
"IPv6", '6', I(ADDRTYPE_IPV6),
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
NULL);
I've changed my mind about what the IP version selection options in the config should do when IPv6 is configured out. They shouldn't sit there looking silly with only `Auto' and `IPv4' settings: they should instead be completely absent. I had thought the former was acceptable since IPv4-only was a configuration that people should only be using if their compilers didn't support IPv6, but now it occurs to me that ports to fundamentally non-IPv6-supporting platforms are not implausible, and on such ports the presence of a vestigial config option under the _standard_ build conditions would be a low-quality solution. [originally from svn r5084]
2005-01-09 14:44:21 +03:00
#endif
Been meaning to do this for years: introduce a configuration option to manually tweak the host name and port number under which the SSH host key is read and written. I've put it in the cross-platform Connection panel. Partly under the flimsy pretext that other backends _can_ use it if they so wish (and in fact it overrides the host name for title-bar purposes in all network backends, though it has no other effect in anything but SSH); but mostly because the SSH panel was too full already :-) [originally from svn r8033]
2008-06-01 15:16:32 +04:00
Fixed a PuTTYtel startup assertion failure introduced in r8305. While I'm here, a cosmetic PuTTYtel change: remove a reference to SSH from the "logical host name" label in PuTTYtel only. [originally from svn r8331] [r8305 == ca6fc3a4daf51166a15693feffc967bee9e3f59a]
2008-11-25 21:43:52 +03:00
{
Turn Backend into a sensible classoid. Nearly every part of the code that ever handles a full backend structure has historically done it using a pair of pointer variables, one pointing at a constant struct full of function pointers, and the other pointing to a 'void *' state object that's passed to each of those. While I'm modernising the rest of the code, this seems like a good time to turn that into the same more or less type-safe and less cumbersome system as I'm using for other parts of the code, such as Socket, Plug, BinaryPacketProtocol and so forth: the Backend structure contains a vtable pointer, and a system of macro wrappers handles dispatching through that vtable.
2018-09-11 18:23:38 +03:00
const char *label = backend_vt_from_proto(PROT_SSH) ?
Fixed a PuTTYtel startup assertion failure introduced in r8305. While I'm here, a cosmetic PuTTYtel change: remove a reference to SSH from the "logical host name" label in PuTTYtel only. [originally from svn r8331] [r8305 == ca6fc3a4daf51166a15693feffc967bee9e3f59a]
2008-11-25 21:43:52 +03:00
"Logical name of remote host (e.g. for SSH key lookup):" :
"Logical name of remote host:";
s = ctrl_getset(b, "Connection", "identity",
"Logical name of remote host");
ctrl_editbox(s, label, 'm', 100,
HELPCTX(connection_loghost),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_loghost), I(1));
Fixed a PuTTYtel startup assertion failure introduced in r8305. While I'm here, a cosmetic PuTTYtel change: remove a reference to SSH from the "logical host name" label in PuTTYtel only. [originally from svn r8331] [r8305 == ca6fc3a4daf51166a15693feffc967bee9e3f59a]
2008-11-25 21:43:52 +03:00
}
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
}
/*
* A sub-panel Connection/Data, containing options that
* decide on data to send to the server.
*/
if (!midsession) {
ctrl_settitle(b, "Connection/Data", "Data to send to the server");
s = ctrl_getset(b, "Connection/Data", "login",
"Login details");
ctrl_editbox(s, "Auto-login username", 'u', 50,
HELPCTX(connection_username),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_username), I(1));
New option to allow use of the local OS username for login to the remote side if we have no better ideas, with UI shamelessly stolen from Quest PuTTY. Off by default, which effectively reverts the change to using the local username by default that came in with GSSAPI support in r8138. Anyone wanting seamless single sign-on will need to set the new option. (The previous default behaviour was getting in the way in ad-hoc scenarios.) Note that the PSCP and Unix-Plink behaviour of using the local username by default have remained unchanged throughout; they are not affected by the new option. Not sure if that's the Right Thing. [originally from svn r8324] [r8138 == de5dd9d65c0e2ffa9bc9cab038bf0be77efbf820]
2008-11-24 20:51:42 +03:00
{
/* We assume the local username is sufficiently stable
* to include on the dialog box. */
char *user = get_username();
When looking for a local username on Windows, if we can get hold of the NameUserPrincipal, use that; this avoids an issue with SSPI/GSSAPI where the user logged in to the local machine with a different case of username to the (case-sensitive) Kerberos username. Falls back to GetUserName as before if that doesn't work (for machines not on a domain, and Win9x). Based on a patch by SebastianUnger. [originally from svn r8909]
2010-03-24 23:12:25 +03:00
char *userlabel = dupprintf("Use system username (%s)",
user ? user : "");
New option to allow use of the local OS username for login to the remote side if we have no better ideas, with UI shamelessly stolen from Quest PuTTY. Off by default, which effectively reverts the change to using the local username by default that came in with GSSAPI support in r8138. Anyone wanting seamless single sign-on will need to set the new option. (The previous default behaviour was getting in the way in ad-hoc scenarios.) Note that the PSCP and Unix-Plink behaviour of using the local username by default have remained unchanged throughout; they are not affected by the new option. Not sure if that's the Right Thing. [originally from svn r8324] [r8138 == de5dd9d65c0e2ffa9bc9cab038bf0be77efbf820]
2008-11-24 20:51:42 +03:00
sfree(user);
ctrl_radiobuttons(s, "When username is not specified:", 'n', 4,
HELPCTX(connection_username_from_env),
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
conf_radiobutton_bool_handler,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
I(CONF_username_from_env),
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
"Prompt", I(false),
userlabel, I(true),
New option to allow use of the local OS username for login to the remote side if we have no better ideas, with UI shamelessly stolen from Quest PuTTY. Off by default, which effectively reverts the change to using the local username by default that came in with GSSAPI support in r8138. Anyone wanting seamless single sign-on will need to set the new option. (The previous default behaviour was getting in the way in ad-hoc scenarios.) Note that the PSCP and Unix-Plink behaviour of using the local username by default have remained unchanged throughout; they are not affected by the new option. Not sure if that's the Right Thing. [originally from svn r8324] [r8138 == de5dd9d65c0e2ffa9bc9cab038bf0be77efbf820]
2008-11-24 20:51:42 +03:00
NULL);
sfree(userlabel);
}
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
s = ctrl_getset(b, "Connection/Data", "term",
"Terminal details");
Finer granularity of config box handling. SSH packet logging should now not show up when it's meaningless (in PuTTYtel, in pterm, and in the middle of any non-SSH session), and the Connection panel is inhibited completely in pterm. [originally from svn r3146]
2003-04-26 18:35:34 +04:00
ctrl_editbox(s, "Terminal-type string", 't', 50,
HELPCTX(connection_termtype),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_termtype), I(1));
In SSH, we now send terminal speeds to the server when requesting a pty (we didn't before) - `ssh-termspeed'. In the process, I've removed the individual controls on the Telnet and Rlogin panels and replaced them with one on the Connection panel (since they were backed by the same storage anyway). The terminal speeds sent in SSH are logged in the Event Log. [originally from svn r4133]
2004-04-25 00:05:03 +04:00
ctrl_editbox(s, "Terminal speeds", 's', 50,
HELPCTX(connection_termspeed),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_termspeed), I(1));
Moved the environment variables config block out of the Telnet panel into the Connection panel, and implemented support for the SSH2 "env" request. (I haven't yet found a server which accepts this request, so although I've visually checked the packet log and it looks OK, I haven't yet been able to do a full end-to-end test.) Also, the `pty' backend reads this data and does a series of `putenv' commands before launching the shell or application. This is mostly because in last week's UTF-8 faffings I got thoroughly sick of typing `export LANG=en_GB.UTF-8' every time I started a new testing pterm, and it suddenly occurred to me that this would be precisely the sort of thing you'd want to have pterm set up for you, particularly since you can configure it alongside the translation settings and so you can ensure they match up properly. [originally from svn r4645]
2004-10-16 14:56:54 +04:00
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
s = ctrl_getset(b, "Connection/Data", "env",
"Environment variables");
Moved the environment variables config block out of the Telnet panel into the Connection panel, and implemented support for the SSH2 "env" request. (I haven't yet found a server which accepts this request, so although I've visually checked the packet log and it looks OK, I haven't yet been able to do a full end-to-end test.) Also, the `pty' backend reads this data and does a series of `putenv' commands before launching the shell or application. This is mostly because in last week's UTF-8 faffings I got thoroughly sick of typing `export LANG=en_GB.UTF-8' every time I started a new testing pterm, and it suddenly occurred to me that this would be precisely the sort of thing you'd want to have pterm set up for you, particularly since you can configure it alongside the translation settings and so you can ensure they match up properly. [originally from svn r4645]
2004-10-16 14:56:54 +04:00
ctrl_columns(s, 2, 80, 20);
ed = (struct environ_data *)
ctrl_alloc(b, sizeof(struct environ_data));
ed->varbox = ctrl_editbox(s, "Variable", 'v', 60,
HELPCTX(telnet_environ),
environ_handler, P(ed), P(NULL));
ed->varbox->generic.column = 0;
ed->valbox = ctrl_editbox(s, "Value", 'l', 60,
HELPCTX(telnet_environ),
environ_handler, P(ed), P(NULL));
ed->valbox->generic.column = 0;
ed->addbutton = ctrl_pushbutton(s, "Add", 'd',
HELPCTX(telnet_environ),
environ_handler, P(ed));
ed->addbutton->generic.column = 1;
ed->rembutton = ctrl_pushbutton(s, "Remove", 'r',
HELPCTX(telnet_environ),
environ_handler, P(ed));
ed->rembutton->generic.column = 1;
ctrl_columns(s, 1, 100);
ed->listbox = ctrl_listbox(s, NULL, NO_SHORTCUT,
HELPCTX(telnet_environ),
environ_handler, P(ed));
ed->listbox->listbox.height = 3;
ed->listbox->listbox.ncols = 2;
ed->listbox->listbox.percentages = snewn(2, int);
ed->listbox->listbox.percentages[0] = 30;
ed->listbox->listbox.percentages[1] = 70;
Finer granularity of config box handling. SSH packet logging should now not show up when it's meaningless (in PuTTYtel, in pterm, and in the middle of any non-SSH session), and the Connection panel is inhibited completely in pterm. [originally from svn r3146]
2003-04-26 18:35:34 +04:00
}
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
if (!midsession) {
/*
* The Connection/Proxy panel.
*/
ctrl_settitle(b, "Connection/Proxy",
"Options controlling proxy usage");
Yesterday's proxy enhancements also slightly nadgered the config box, in that it started to expand under the weight of proxy options. Now fixed, by folding the SOCKS version selector into the general proxy type selector so there's one single 5- or 6-way radio button set split over two lines. settings.c has of course grown a backwards compatibility wart to deal with legacy config data. [originally from svn r3168]
2003-05-07 16:07:23 +04:00
s = ctrl_getset(b, "Connection/Proxy", "basics", NULL);
ctrl_radiobuttons(s, "Proxy type:", 't', 3,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
HELPCTX(proxy_type),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler,
I(CONF_proxy_type),
Support, on Unix only (so far), for OpenSSH-style generic proxying (running a local command in a pair of pipes and proxying through that, for example `ssh proxyhost nc -q0 %host %port'). [originally from svn r3164]
2003-05-06 23:52:31 +04:00
"None", I(PROXY_NONE),
Yesterday's proxy enhancements also slightly nadgered the config box, in that it started to expand under the weight of proxy options. Now fixed, by folding the SOCKS version selector into the general proxy type selector so there's one single 5- or 6-way radio button set split over two lines. settings.c has of course grown a backwards compatibility wart to deal with legacy config data. [originally from svn r3168]
2003-05-07 16:07:23 +04:00
"SOCKS 4", I(PROXY_SOCKS4),
"SOCKS 5", I(PROXY_SOCKS5),
Support, on Unix only (so far), for OpenSSH-style generic proxying (running a local command in a pair of pipes and proxying through that, for example `ssh proxyhost nc -q0 %host %port'). [originally from svn r3164]
2003-05-06 23:52:31 +04:00
"HTTP", I(PROXY_HTTP),
"Telnet", I(PROXY_TELNET),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
NULL);
ctrl_columns(s, 2, 80, 20);
c = ctrl_editbox(s, "Proxy hostname", 'y', 100,
HELPCTX(proxy_main),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler,
I(CONF_proxy_host), I(1));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
c->generic.column = 0;
c = ctrl_editbox(s, "Port", 'p', 100,
HELPCTX(proxy_main),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler,
I(CONF_proxy_port),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
I(-1));
c->generic.column = 1;
ctrl_columns(s, 1, 100);
ctrl_editbox(s, "Exclude Hosts/IPs", 'e', 100,
HELPCTX(proxy_exclude),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler,
I(CONF_proxy_exclude_list), I(1));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_checkbox(s, "Consider proxying local host connections", 'x',
HELPCTX(proxy_exclude),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_even_proxy_localhost));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_radiobuttons(s, "Do DNS name lookup at proxy end:", 'd', 3,
HELPCTX(proxy_dns),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler,
I(CONF_proxy_dns),
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
"No", I(FORCE_OFF),
"Auto", I(AUTO),
"Yes", I(FORCE_ON), NULL);
ctrl_editbox(s, "Username", 'u', 60,
HELPCTX(proxy_auth),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler,
I(CONF_proxy_username), I(1));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
c = ctrl_editbox(s, "Password", 'w', 60,
HELPCTX(proxy_auth),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler,
I(CONF_proxy_password), I(1));
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
c->editbox.password = true;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_editbox(s, "Telnet command", 'm', 100,
HELPCTX(proxy_command),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler,
I(CONF_proxy_telnet_command), I(1));
Option to log proxy setup diagnostics to the terminal. It has three settings: on, off, and 'only until session starts'. The idea of the last one is that if you use something like 'ssh -v' as your proxy command, you probably wanted to see the initial SSH connection-setup messages while you were waiting to see if the connection would be set up successfully at all, but probably _didn't_ want a slew of diagnostics from rekeys disrupting your terminal in mid-emacs once the session had got properly under way. Default is off, to avoid startling people used to the old behaviour. I wonder if I should have set it more aggressively, though.
2015-11-22 17:33:28 +03:00
ctrl_radiobuttons(s, "Print proxy diagnostics "
"in the terminal window", 'r', 5,
Document proxy logging control. (This was added in 7c65b9c57.)
2017-02-12 02:30:52 +03:00
HELPCTX(proxy_logging),
Option to log proxy setup diagnostics to the terminal. It has three settings: on, off, and 'only until session starts'. The idea of the last one is that if you use something like 'ssh -v' as your proxy command, you probably wanted to see the initial SSH connection-setup messages while you were waiting to see if the connection would be set up successfully at all, but probably _didn't_ want a slew of diagnostics from rekeys disrupting your terminal in mid-emacs once the session had got properly under way. Default is off, to avoid startling people used to the old behaviour. I wonder if I should have set it more aggressively, though.
2015-11-22 17:33:28 +03:00
conf_radiobutton_handler,
I(CONF_proxy_log_to_term),
"No", I(FORCE_OFF),
"Yes", I(FORCE_ON),
"Only until session starts", I(AUTO), NULL);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
/*
* The Telnet panel exists in the base config box, and in a
* mid-session reconfig box _if_ we're using Telnet.
*/
if (!midsession || protocol == PROT_TELNET) {
/*
* The Connection/Telnet panel.
*/
ctrl_settitle(b, "Connection/Telnet",
"Options controlling Telnet connections");
s = ctrl_getset(b, "Connection/Telnet", "protocol",
"Telnet protocol adjustments");
if (!midsession) {
ctrl_radiobuttons(s, "Handling of OLD_ENVIRON ambiguity:",
NO_SHORTCUT, 2,
HELPCTX(telnet_oldenviron),
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
conf_radiobutton_bool_handler,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
I(CONF_rfc_environ),
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
"BSD (commonplace)", 'b', I(false),
"RFC 1408 (unusual)", 'f', I(true), NULL);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_radiobuttons(s, "Telnet negotiation mode:", 't', 2,
HELPCTX(telnet_passive),
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
conf_radiobutton_bool_handler,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
I(CONF_passive_telnet),
Switch some Conf settings over to being bool. I think this is the full set of things that ought logically to be boolean. One annoyance is that quite a few radio-button controls in config.c address Conf fields that are now bool rather than int, which means that the shared handler function can't just access them all with conf_{get,set}_int. Rather than back out the rigorous separation of int and bool in conf.c itself, I've just added a similar alternative handler function for the bool-typed ones.
2018-10-29 22:57:31 +03:00
"Passive", I(true), "Active", I(false), NULL);
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
Document telnet_keyboard more completely, cross-reference from "Special Commands" section, and tweak option description in code. [originally from svn r4572]
2004-09-23 02:15:25 +04:00
ctrl_checkbox(s, "Keyboard sends Telnet special commands", 'k',
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
HELPCTX(telnet_specialkeys),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_telnet_keyboard));
Document telnet_keyboard more completely, cross-reference from "Special Commands" section, and tweak option description in code. [originally from svn r4572]
2004-09-23 02:15:25 +04:00
ctrl_checkbox(s, "Return key sends Telnet New Line instead of ^M",
'm', HELPCTX(telnet_newline),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_telnet_newline));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
if (!midsession) {
/*
* The Connection/Rlogin panel.
*/
ctrl_settitle(b, "Connection/Rlogin",
"Options controlling Rlogin connections");
s = ctrl_getset(b, "Connection/Rlogin", "data",
"Data to send to the server");
ctrl_editbox(s, "Local username:", 'l', 50,
HELPCTX(rlogin_localuser),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_localusername), I(1));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
/*
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
* All the SSH stuff is omitted in PuTTYtel, or in a reconfig
* when we're not doing SSH.
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
*/
Turn Backend into a sensible classoid. Nearly every part of the code that ever handles a full backend structure has historically done it using a pair of pointer variables, one pointing at a constant struct full of function pointers, and the other pointing to a 'void *' state object that's passed to each of those. While I'm modernising the rest of the code, this seems like a good time to turn that into the same more or less type-safe and less cumbersome system as I'm using for other parts of the code, such as Socket, Plug, BinaryPacketProtocol and so forth: the Backend structure contains a vtable pointer, and a system of macro wrappers handles dispatching through that vtable.
2018-09-11 18:23:38 +03:00
if (backend_vt_from_proto(PROT_SSH) &&
(!midsession || protocol == PROT_SSH)) {
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
/*
* The Connection/SSH panel.
*/
ctrl_settitle(b, "Connection/SSH",
"Options controlling SSH connections");
Disable some mid-session configs for downstreams. Compression, encryption, and key exchange settings are all meaningless to reconfigure in connection-sharing downstreams.
2014-11-09 03:10:46 +03:00
/* SSH-1 or connection-sharing downstream */
if (midsession && (protcfginfo == 1 || protcfginfo == -1)) {
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
s = ctrl_getset(b, "Connection/SSH", "disclaimer", NULL);
ctrl_text(s, "Nothing on this panel may be reconfigured in mid-"
"session; it is only here so that sub-panels of it can "
"exist without looking strange.", HELPCTX(no_help));
}
if (!midsession) {
s = ctrl_getset(b, "Connection/SSH", "data",
"Data to send to the server");
ctrl_editbox(s, "Remote command:", 'r', 100,
HELPCTX(ssh_command),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_remote_cmd), I(1));
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
s = ctrl_getset(b, "Connection/SSH", "protocol", "Protocol options");
ctrl_checkbox(s, "Don't start a shell or command at all", 'n',
HELPCTX(ssh_noshell),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_ssh_no_shell));
Allow reconfiguration of compression and cipher settings in mid-session in SSH2: this forces an immediate rekey to activate the new settings. I'm not sure exactly what this will be useful for (except possibly it might make comparative performance testing easier?), but it has wonderful James Bond value for being able to switch to a more secure cipher before doing anything sensitive :-) If, that is, you weren't using the most secure one to begin with... [originally from svn r5051]
2004-12-31 13:51:14 +03:00
}
Disable some mid-session configs for downstreams. Compression, encryption, and key exchange settings are all meaningless to reconfigure in connection-sharing downstreams.
2014-11-09 03:10:46 +03:00
if (!midsession || !(protcfginfo == 1 || protcfginfo == -1)) {
Allow reconfiguration of compression and cipher settings in mid-session in SSH2: this forces an immediate rekey to activate the new settings. I'm not sure exactly what this will be useful for (except possibly it might make comparative performance testing easier?), but it has wonderful James Bond value for being able to switch to a more secure cipher before doing anything sensitive :-) If, that is, you weren't using the most secure one to begin with... [originally from svn r5051]
2004-12-31 13:51:14 +03:00
s = ctrl_getset(b, "Connection/SSH", "protocol", "Protocol options");
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
ctrl_checkbox(s, "Enable compression", 'e',
HELPCTX(ssh_compress),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_compression));
Allow reconfiguration of compression and cipher settings in mid-session in SSH2: this forces an immediate rekey to activate the new settings. I'm not sure exactly what this will be useful for (except possibly it might make comparative performance testing easier?), but it has wonderful James Bond value for being able to switch to a more secure cipher before doing anything sensitive :-) If, that is, you weren't using the most secure one to begin with... [originally from svn r5051]
2004-12-31 13:51:14 +03:00
}
Don't show SSH connection sharing options mid-session (they don't work). [originally from svn r10228]
2014-09-21 02:14:24 +04:00
if (!midsession) {
Implement connection sharing between instances of PuTTY. The basic strategy is described at the top of the new source file sshshare.c. In very brief: an 'upstream' PuTTY opens a Unix-domain socket or Windows named pipe, and listens for connections from other PuTTYs wanting to run sessions on the same server. The protocol spoken down that socket/pipe is essentially the bare ssh-connection protocol, using a trivial binary packet protocol with no encryption, and the upstream has to do some fiddly transformations that I've been referring to as 'channel-number NAT' to avoid resource clashes between the sessions it's managing. This is quite different from OpenSSH's approach of using the Unix- domain socket as a means of passing file descriptors around; the main reason for that is that fd-passing is Unix-specific but this system has to work on Windows too. However, there are additional advantages, such as making it easy for each downstream PuTTY to run its own independent set of port and X11 forwardings (though the method for making the latter work is quite painful). Sharing is off by default, but configuration is intended to be very easy in the normal case - just tick one box in the SSH config panel and everything else happens automatically. [originally from svn r10083]
2013-11-17 18:05:41 +04:00
s = ctrl_getset(b, "Connection/SSH", "sharing", "Sharing an SSH connection between PuTTY tools");
ctrl_checkbox(s, "Share SSH connections if possible", 's',
HELPCTX(ssh_share),
conf_checkbox_handler,
I(CONF_ssh_connection_sharing));
ctrl_text(s, "Permitted roles in a shared connection:",
HELPCTX(ssh_share));
ctrl_checkbox(s, "Upstream (connecting to the real server)", 'u',
HELPCTX(ssh_share),
conf_checkbox_handler,
I(CONF_ssh_connection_sharing_upstream));
ctrl_checkbox(s, "Downstream (connecting to the upstream PuTTY)", 'd',
HELPCTX(ssh_share),
conf_checkbox_handler,
I(CONF_ssh_connection_sharing_downstream));
}
Allow reconfiguration of compression and cipher settings in mid-session in SSH2: this forces an immediate rekey to activate the new settings. I'm not sure exactly what this will be useful for (except possibly it might make comparative performance testing easier?), but it has wonderful James Bond value for being able to switch to a more secure cipher before doing anything sensitive :-) If, that is, you weren't using the most secure one to begin with... [originally from svn r5051]
2004-12-31 13:51:14 +03:00
if (!midsession) {
s = ctrl_getset(b, "Connection/SSH", "protocol", "Protocol options");
Stop supporting fallback between SSH versions. The UI now only has "1" and "2" options for SSH protocol version, which behave like the old "1 only" and "2 only" options; old SSH-N-with-fallback settings are interpreted as SSH-N-only. This prevents any attempt at a protocol downgrade attack. Most users should see no difference; those poor souls who still have to work with SSH-1 equipment now have to explicitly opt in.
2016-03-28 22:23:57 +03:00
ctrl_radiobuttons(s, "SSH protocol version:", NO_SHORTCUT, 2,
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
HELPCTX(ssh_protocol),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler,
I(CONF_sshprot),
Stop supporting fallback between SSH versions. The UI now only has "1" and "2" options for SSH protocol version, which behave like the old "1 only" and "2 only" options; old SSH-N-with-fallback settings are interpreted as SSH-N-only. This prevents any attempt at a protocol downgrade attack. Most users should see no difference; those poor souls who still have to work with SSH-1 equipment now have to explicitly opt in.
2016-03-28 22:23:57 +03:00
"2", '2', I(3),
"1 (INSECURE)", '1', I(0), NULL);
Allow reconfiguration of compression and cipher settings in mid-session in SSH2: this forces an immediate rekey to activate the new settings. I'm not sure exactly what this will be useful for (except possibly it might make comparative performance testing easier?), but it has wonderful James Bond value for being able to switch to a more secure cipher before doing anything sensitive :-) If, that is, you weren't using the most secure one to begin with... [originally from svn r5051]
2004-12-31 13:51:14 +03:00
}
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
Support reconfiguration of key exchange in mid-session. The fiddly bit is working out when to reschedule the next rekey for when the timeout or data limit changes; sometimes it will be _right now_ because we're already over the new limit. Still to do: the Kex panel should not appear in mid-session if we are using SSHv1. [originally from svn r5031]
2004-12-28 17:10:32 +03:00
/*
* The Connection/SSH/Kex panel. (Owing to repeat key
Disable manual host key config in mid-session. Changing it can't have any useful effect, since we have strictly enforced that the host key used for rekeys is the same as the first key exchange since b8e668c.
2014-11-09 03:08:36 +03:00
* exchange, much of this is meaningful in mid-session _if_
Disable some mid-session configs for downstreams. Compression, encryption, and key exchange settings are all meaningless to reconfigure in connection-sharing downstreams.
2014-11-09 03:10:46 +03:00
* we're using SSH-2 and are not a connection-sharing
* downstream, or haven't decided yet.)
Support reconfiguration of key exchange in mid-session. The fiddly bit is working out when to reschedule the next rekey for when the timeout or data limit changes; sometimes it will be _right now_ because we're already over the new limit. Still to do: the Kex panel should not appear in mid-session if we are using SSHv1. [originally from svn r5031]
2004-12-28 17:10:32 +03:00
*/
Disable some mid-session configs for downstreams. Compression, encryption, and key exchange settings are all meaningless to reconfigure in connection-sharing downstreams.
2014-11-09 03:10:46 +03:00
if (protcfginfo != 1 && protcfginfo != -1) {
Loose end from r5031: the Kex panel should only be displayed in mid-session if we are not using SSHv1. I've done this by introducing a generic `cfg_info' function which every back end can use to communicate an int's worth of data to setup_config_box; in SSH that's the protocol version in use, and in everything else it's currently zero. [originally from svn r5040] [r5031 == d77102a8d535a7000d6d909529a61a1564f6d678]
2004-12-29 15:32:25 +03:00
ctrl_settitle(b, "Connection/SSH/Kex",
"Options controlling SSH key exchange");
s = ctrl_getset(b, "Connection/SSH/Kex", "main",
"Key exchange algorithm options");
colon in kex UI [originally from svn r5062]
2005-01-02 16:17:22 +03:00
c = ctrl_draglist(s, "Algorithm selection policy:", 's',
Loose end from r5031: the Kex panel should only be displayed in mid-session if we are not using SSHv1. I've done this by introducing a generic `cfg_info' function which every back end can use to communicate an int's worth of data to setup_config_box; in SSH that's the protocol version in use, and in everything else it's currently zero. [originally from svn r5040] [r5031 == d77102a8d535a7000d6d909529a61a1564f6d678]
2004-12-29 15:32:25 +03:00
HELPCTX(ssh_kexlist),
kexlist_handler, P(NULL));
Revert KEX_MAX_CONF system from the GSS kex patch. Commit d515e4f1a went through a lot of very different shapes before it was finally pushed. In some of them, GSS kex had its own value in the kex enumeration, but it was used in ssh.c but not in config.c (because, as in the final version, it wasn't configured by the same drag-list system as the rest of them). So we had to distinguish the set of key exchange ids known to the program as a whole from the set controllable in the configuration. In the final version, GSS kex ended up even more separated from the kex enumeration than that: the enum value KEX_GSS_SHA1_K5 isn't used at all. Instead, GSS key exchange appears in the list at the point of translation from the list of enum values into the list of pointers to data structures full of kex methods. But after all the changes, everyone involved forgot to revert the part of the patch which split KEX_MAX in two and introduced the pointless value KEX_GSS_SHA1_K5! Better late than never: I'm reverting it now, to avoid confusion, and because I don't have any reason to think the distinction will be useful for any other purpose.
2018-05-01 09:41:01 +03:00
c->listbox.height = KEX_MAX;
Fix compilation with NO_GSSAPI. This is a fairly shallow patch, which removes the UI and interactions with external libraries. Some other machinery (which is dead code in this configuration) is left in place. Adapted by me from a patch by Jeroen Roovers.
2019-03-26 02:46:59 +03:00
#ifndef NO_GSSAPI
Make GSS kex and GSS userauth separately configurable. The former has advantages in terms of keeping Kerberos credentials up to date, but it also does something sufficiently weird to the usual SSH host key system that I think it's worth making sure users have a means of turning it off separately from the less intrusive GSS userauth.
2018-04-26 21:15:15 +03:00
ctrl_checkbox(s, "Attempt GSSAPI key exchange",
'k', HELPCTX(ssh_gssapi),
conf_checkbox_handler,
I(CONF_try_gssapi_kex));
Fix compilation with NO_GSSAPI. This is a fairly shallow patch, which removes the UI and interactions with external libraries. Some other machinery (which is dead code in this configuration) is left in place. Adapted by me from a patch by Jeroen Roovers.
2019-03-26 02:46:59 +03:00
#endif
Loose end from r5031: the Kex panel should only be displayed in mid-session if we are not using SSHv1. I've done this by introducing a generic `cfg_info' function which every back end can use to communicate an int's worth of data to setup_config_box; in SSH that's the protocol version in use, and in everything else it's currently zero. [originally from svn r5040] [r5031 == d77102a8d535a7000d6d909529a61a1564f6d678]
2004-12-29 15:32:25 +03:00
s = ctrl_getset(b, "Connection/SSH/Kex", "repeat",
"Options controlling key re-exchange");
ctrl_editbox(s, "Max minutes before rekey (0 for no limit)", 't', 20,
HELPCTX(ssh_kex_repeat),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler,
I(CONF_ssh_rekey_time),
Loose end from r5031: the Kex panel should only be displayed in mid-session if we are not using SSHv1. I've done this by introducing a generic `cfg_info' function which every back end can use to communicate an int's worth of data to setup_config_box; in SSH that's the protocol version in use, and in everything else it's currently zero. [originally from svn r5040] [r5031 == d77102a8d535a7000d6d909529a61a1564f6d678]
2004-12-29 15:32:25 +03:00
I(-1));
Fix compilation with NO_GSSAPI. This is a fairly shallow patch, which removes the UI and interactions with external libraries. Some other machinery (which is dead code in this configuration) is left in place. Adapted by me from a patch by Jeroen Roovers.
2019-03-26 02:46:59 +03:00
#ifndef NO_GSSAPI
Support GSS key exchange, for Kerberos 5 only. This is a heavily edited (by me) version of a patch originally due to Nico Williams and Viktor Dukhovni. Their comments: * Don't delegate credentials when rekeying unless there's a new TGT or the old service ticket is nearly expired. * Check for the above conditions more frequently (every two minutes by default) and rekey when we would delegate credentials. * Do not rekey with very short service ticket lifetimes; some GSSAPI libraries may lose the race to use an almost expired ticket. Adjust the timing of rekey checks to try to avoid this possibility. My further comments: The most interesting thing about this patch to me is that the use of GSS key exchange causes a switch over to a completely different model of what host keys are for. This comes from RFC 4462 section 2.1: the basic idea is that when your session is mostly bidirectionally authenticated by the GSSAPI exchanges happening in initial kex and every rekey, host keys become more or less vestigial, and their remaining purpose is to allow a rekey to happen if the requirements of the SSH protocol demand it at an awkward moment when the GSS credentials are not currently available (e.g. timed out and haven't been renewed yet). As such, there's no need for host keys to be _permanent_ or to be a reliable identifier of a particular host, and RFC 4462 allows for the possibility that they might be purely transient and only for this kind of emergency fallback purpose. Therefore, once PuTTY has done a GSS key exchange, it disconnects itself completely from the permanent host key cache functions in storage.h, and instead switches to a _transient_ host key cache stored in memory with the lifetime of just that SSH session. That cache is populated with keys received from the server as a side effect of GSS kex (via the optional SSH2_MSG_KEXGSS_HOSTKEY message), and used if later in the session we have to fall back to a non-GSS key exchange. However, in practice servers we've tested against do not send a host key in that way, so we also have a fallback method of populating the transient cache by triggering an immediate non-GSS rekey straight after userauth (reusing the code path we also use to turn on OpenSSH delayed encryption without the race condition).
2018-04-26 09:18:59 +03:00
ctrl_editbox(s, "Minutes between GSS checks (0 for never)", NO_SHORTCUT, 20,
HELPCTX(ssh_kex_repeat),
conf_editbox_handler,
I(CONF_gssapirekey),
I(-1));
Fix compilation with NO_GSSAPI. This is a fairly shallow patch, which removes the UI and interactions with external libraries. Some other machinery (which is dead code in this configuration) is left in place. Adapted by me from a patch by Jeroen Roovers.
2019-03-26 02:46:59 +03:00
#endif
Loose end from r5031: the Kex panel should only be displayed in mid-session if we are not using SSHv1. I've done this by introducing a generic `cfg_info' function which every back end can use to communicate an int's worth of data to setup_config_box; in SSH that's the protocol version in use, and in everything else it's currently zero. [originally from svn r5040] [r5031 == d77102a8d535a7000d6d909529a61a1564f6d678]
2004-12-29 15:32:25 +03:00
ctrl_editbox(s, "Max data before rekey (0 for no limit)", 'x', 20,
HELPCTX(ssh_kex_repeat),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler,
I(CONF_ssh_rekey_data),
Loose end from r5031: the Kex panel should only be displayed in mid-session if we are not using SSHv1. I've done this by introducing a generic `cfg_info' function which every back end can use to communicate an int's worth of data to setup_config_box; in SSH that's the protocol version in use, and in everything else it's currently zero. [originally from svn r5040] [r5031 == d77102a8d535a7000d6d909529a61a1564f6d678]
2004-12-29 15:32:25 +03:00
I(16));
ctrl_text(s, "(Use 1M for 1 megabyte, 1G for 1 gigabyte etc)",
HELPCTX(ssh_kex_repeat));
Disable manual host key config in mid-session. Changing it can't have any useful effect, since we have strictly enforced that the host key used for rekeys is the same as the first key exchange since b8e668c.
2014-11-09 03:08:36 +03:00
}
New option to manually configure the expected host key(s). This option is available from the command line as '-hostkey', and is also configurable through the GUI. When enabled, it completely replaces all of the automated host key management: the server's host key will be checked against the manually configured list, and the connection will be allowed or disconnected on that basis, and the host key store in the registry will not be either consulted or updated. The main aim is to provide a means of automatically running Plink, PSCP or PSFTP deep inside Windows services where HKEY_CURRENT_USER isn't available to have stored the right host key in. But it also permits you to specify a list of multiple host keys, which means a second use case for the same mechanism will probably be round-robin DNS names that select one of several servers with different host keys. Host keys can be specified as the standard MD5 fingerprint or as an SSH-2 base64 blob, and are canonicalised on input. (The base64 blob is more unwieldy, especially with Windows command-line length limits, but provides a means of specifying the _whole_ public key in case you don't trust MD5. I haven't bothered to provide an analogous mechanism for SSH-1, on the basis that anyone worrying about MD5 should have stopped using SSH-1 already!) [originally from svn r10220]
2014-09-09 15:46:24 +04:00
Configurable preference list for SSH host key types. Now we actually have enough of them to worry about, and especially since some of the types we support are approved by organisations that people might make their own decisions about whether to trust, it seems worth having a config list for host keys the same way we have one for kex types and ciphers. To make room for this, I've created an SSH > Host Keys config panel, and moved the existing host-key related configuration (manually specified fingerprints) into there from the Kex panel.
2016-03-25 18:56:31 +03:00
/*
* The 'Connection/SSH/Host keys' panel.
*/
if (protcfginfo != 1 && protcfginfo != -1) {
ctrl_settitle(b, "Connection/SSH/Host keys",
"Options controlling SSH host keys");
s = ctrl_getset(b, "Connection/SSH/Host keys", "main",
"Host key algorithm preference");
c = ctrl_draglist(s, "Algorithm selection policy:", 's',
HELPCTX(ssh_hklist),
hklist_handler, P(NULL));
c->listbox.height = 5;
}
Disable manual host key config in mid-session. Changing it can't have any useful effect, since we have strictly enforced that the host key used for rekeys is the same as the first key exchange since b8e668c.
2014-11-09 03:08:36 +03:00
/*
* Manual host key configuration is irrelevant mid-session,
* as we enforce that the host key for rekeys is the
* same as that used at the start of the session.
*/
if (!midsession) {
Configurable preference list for SSH host key types. Now we actually have enough of them to worry about, and especially since some of the types we support are approved by organisations that people might make their own decisions about whether to trust, it seems worth having a config list for host keys the same way we have one for kex types and ciphers. To make room for this, I've created an SSH > Host Keys config panel, and moved the existing host-key related configuration (manually specified fingerprints) into there from the Kex panel.
2016-03-25 18:56:31 +03:00
s = ctrl_getset(b, "Connection/SSH/Host keys", "hostkeys",
New option to manually configure the expected host key(s). This option is available from the command line as '-hostkey', and is also configurable through the GUI. When enabled, it completely replaces all of the automated host key management: the server's host key will be checked against the manually configured list, and the connection will be allowed or disconnected on that basis, and the host key store in the registry will not be either consulted or updated. The main aim is to provide a means of automatically running Plink, PSCP or PSFTP deep inside Windows services where HKEY_CURRENT_USER isn't available to have stored the right host key in. But it also permits you to specify a list of multiple host keys, which means a second use case for the same mechanism will probably be round-robin DNS names that select one of several servers with different host keys. Host keys can be specified as the standard MD5 fingerprint or as an SSH-2 base64 blob, and are canonicalised on input. (The base64 blob is more unwieldy, especially with Windows command-line length limits, but provides a means of specifying the _whole_ public key in case you don't trust MD5. I haven't bothered to provide an analogous mechanism for SSH-1, on the basis that anyone worrying about MD5 should have stopped using SSH-1 already!) [originally from svn r10220]
2014-09-09 15:46:24 +04:00
"Manually configure host keys for this connection");
ctrl_columns(s, 2, 75, 25);
c = ctrl_text(s, "Host keys or fingerprints to accept:",
HELPCTX(ssh_kex_manual_hostkeys));
c->generic.column = 0;
/* You want to select from the list, _then_ hit Remove. So
* tab order should be that way round. */
mh = (struct manual_hostkey_data *)
ctrl_alloc(b,sizeof(struct manual_hostkey_data));
mh->rembutton = ctrl_pushbutton(s, "Remove", 'r',
HELPCTX(ssh_kex_manual_hostkeys),
manual_hostkey_handler, P(mh));
mh->rembutton->generic.column = 1;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
mh->rembutton->generic.tabdelay = true;
New option to manually configure the expected host key(s). This option is available from the command line as '-hostkey', and is also configurable through the GUI. When enabled, it completely replaces all of the automated host key management: the server's host key will be checked against the manually configured list, and the connection will be allowed or disconnected on that basis, and the host key store in the registry will not be either consulted or updated. The main aim is to provide a means of automatically running Plink, PSCP or PSFTP deep inside Windows services where HKEY_CURRENT_USER isn't available to have stored the right host key in. But it also permits you to specify a list of multiple host keys, which means a second use case for the same mechanism will probably be round-robin DNS names that select one of several servers with different host keys. Host keys can be specified as the standard MD5 fingerprint or as an SSH-2 base64 blob, and are canonicalised on input. (The base64 blob is more unwieldy, especially with Windows command-line length limits, but provides a means of specifying the _whole_ public key in case you don't trust MD5. I haven't bothered to provide an analogous mechanism for SSH-1, on the basis that anyone worrying about MD5 should have stopped using SSH-1 already!) [originally from svn r10220]
2014-09-09 15:46:24 +04:00
mh->listbox = ctrl_listbox(s, NULL, NO_SHORTCUT,
HELPCTX(ssh_kex_manual_hostkeys),
manual_hostkey_handler, P(mh));
/* This list box can't be very tall, because there's not
* much room in the pane on Windows at least. This makes
* it become really unhelpful if a horizontal scrollbar
* appears, so we suppress that. */
mh->listbox->listbox.height = 2;
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
mh->listbox->listbox.hscroll = false;
New option to manually configure the expected host key(s). This option is available from the command line as '-hostkey', and is also configurable through the GUI. When enabled, it completely replaces all of the automated host key management: the server's host key will be checked against the manually configured list, and the connection will be allowed or disconnected on that basis, and the host key store in the registry will not be either consulted or updated. The main aim is to provide a means of automatically running Plink, PSCP or PSFTP deep inside Windows services where HKEY_CURRENT_USER isn't available to have stored the right host key in. But it also permits you to specify a list of multiple host keys, which means a second use case for the same mechanism will probably be round-robin DNS names that select one of several servers with different host keys. Host keys can be specified as the standard MD5 fingerprint or as an SSH-2 base64 blob, and are canonicalised on input. (The base64 blob is more unwieldy, especially with Windows command-line length limits, but provides a means of specifying the _whole_ public key in case you don't trust MD5. I haven't bothered to provide an analogous mechanism for SSH-1, on the basis that anyone worrying about MD5 should have stopped using SSH-1 already!) [originally from svn r10220]
2014-09-09 15:46:24 +04:00
ctrl_tabdelay(s, mh->rembutton);
mh->keybox = ctrl_editbox(s, "Key", 'k', 80,
HELPCTX(ssh_kex_manual_hostkeys),
manual_hostkey_handler, P(mh), P(NULL));
mh->keybox->generic.column = 0;
mh->addbutton = ctrl_pushbutton(s, "Add key", 'y',
HELPCTX(ssh_kex_manual_hostkeys),
manual_hostkey_handler, P(mh));
mh->addbutton->generic.column = 1;
ctrl_columns(s, 1, 100);
Loose end from r5031: the Kex panel should only be displayed in mid-session if we are not using SSHv1. I've done this by introducing a generic `cfg_info' function which every back end can use to communicate an int's worth of data to setup_config_box; in SSH that's the protocol version in use, and in everything else it's currently zero. [originally from svn r5040] [r5031 == d77102a8d535a7000d6d909529a61a1564f6d678]
2004-12-29 15:32:25 +03:00
}
Support reconfiguration of key exchange in mid-session. The fiddly bit is working out when to reschedule the next rekey for when the timeout or data limit changes; sometimes it will be _right now_ because we're already over the new limit. Still to do: the Kex panel should not appear in mid-session if we are using SSHv1. [originally from svn r5031]
2004-12-28 17:10:32 +03:00
Disable some mid-session configs for downstreams. Compression, encryption, and key exchange settings are all meaningless to reconfigure in connection-sharing downstreams.
2014-11-09 03:10:46 +03:00
if (!midsession || !(protcfginfo == 1 || protcfginfo == -1)) {
Move cipher settings into their own config panel. This makes room in the main SSH panel for new options about connection sharing, which I'm shortly going to add. [originally from svn r10063]
2013-11-17 18:03:25 +04:00
/*
* The Connection/SSH/Cipher panel.
*/
ctrl_settitle(b, "Connection/SSH/Cipher",
"Options controlling SSH encryption");
s = ctrl_getset(b, "Connection/SSH/Cipher",
"encryption", "Encryption options");
c = ctrl_draglist(s, "Encryption cipher selection policy:", 's',
HELPCTX(ssh_ciphers),
cipherlist_handler, P(NULL));
c->listbox.height = 6;
ctrl_checkbox(s, "Enable legacy use of single-DES in SSH-2", 'i',
HELPCTX(ssh_ciphers),
conf_checkbox_handler,
I(CONF_ssh2_des_cbc));
}
Support reconfiguration of key exchange in mid-session. The fiddly bit is working out when to reschedule the next rekey for when the timeout or data limit changes; sometimes it will be _right now_ because we're already over the new limit. Still to do: the Kex panel should not appear in mid-session if we are using SSHv1. [originally from svn r5031]
2004-12-28 17:10:32 +03:00
if (!midsession) {
Add a preference list for SSH-2 key exchange algorithms, on a new "Kex" panel (which will gain more content anon). Retire BUG_SSH2_DH_GEX and add a backwards-compatibility wart, since we never did find a way of automatically detecting this alleged server bug, and in any case there was only ever one report (<3D91F3B5.7030309@inwind.it>, FWIW). Also generalise askcipher() to a new askalg() (thus touching all the front-ends). I've made some attempt to document what SSH key exchange is and why you care, but it could use some review for clarity (and outright lies). [originally from svn r5022]
2004-12-23 05:24:07 +03:00
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
/*
* The Connection/SSH/Auth panel.
*/
ctrl_settitle(b, "Connection/SSH/Auth",
"Options controlling SSH authentication");
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
Implement `bypass-ssh2-userauth', since from correspondence it sounds like there are servers which could in principle operate in this mode, although I don't know if any do in practice. (Hence, I haven't been able to test it.) [originally from svn r5748] [this svn revision also touched putty-wishlist]
2005-05-06 02:37:54 +04:00
s = ctrl_getset(b, "Connection/SSH/Auth", "main", NULL);
Add an option to disable SSH-2 banners. [originally from svn r9055]
2010-12-27 04:19:13 +03:00
ctrl_checkbox(s, "Display pre-authentication banner (SSH-2 only)",
'd', HELPCTX(ssh_auth_banner),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_ssh_show_banner));
Demote SSH bypass-auth option; downplay in docs. It's too esoteric to be the first thing on the Auth panel; I've never heard of any SSH server that supports it in the decade since I implemented it. The only Google hits are lost souls mistakenly believing they need it for passwordless public-key login and the like.
2016-03-25 16:10:00 +03:00
ctrl_checkbox(s, "Bypass authentication entirely (SSH-2 only)", 'b',
HELPCTX(ssh_auth_bypass),
conf_checkbox_handler,
I(CONF_ssh_no_userauth));
Implement `bypass-ssh2-userauth', since from correspondence it sounds like there are servers which could in principle operate in this mode, although I don't know if any do in practice. (Hence, I haven't been able to test it.) [originally from svn r5748] [this svn revision also touched putty-wishlist]
2005-05-06 02:37:54 +04:00
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
s = ctrl_getset(b, "Connection/SSH/Auth", "methods",
"Authentication methods");
Introduce a new checkbox and command-line option to inhibit use of Pageant for local authentication. (This is a `don't use Pageant for authentication at session startup' button rather than a `pretend Pageant doesn't exist' button: that is, agent forwarding is independent of this option.) [originally from svn r6572]
2006-02-19 15:05:12 +03:00
ctrl_checkbox(s, "Attempt authentication using Pageant", 'p',
HELPCTX(ssh_auth_pageant),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_tryagent));
Consistently use a single notation to refer to SSH protocol versions, as discussed. Use Barrett and Silverman's convention of "SSH-1" for SSH protocol version 1 and "SSH-2" for protocol 2 ("SSH1"/"SSH2" refer to ssh.com implementations in this scheme). <http://www.snailbook.com/terms.html> [originally from svn r5480]
2005-03-10 19:36:05 +03:00
ctrl_checkbox(s, "Attempt TIS or CryptoCard auth (SSH-1)", 'm',
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
HELPCTX(ssh_auth_tis),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_try_tis_auth));
Consistently use a single notation to refer to SSH protocol versions, as discussed. Use Barrett and Silverman's convention of "SSH-1" for SSH protocol version 1 and "SSH-2" for protocol 2 ("SSH1"/"SSH2" refer to ssh.com implementations in this scheme). <http://www.snailbook.com/terms.html> [originally from svn r5480]
2005-03-10 19:36:05 +03:00
ctrl_checkbox(s, "Attempt \"keyboard-interactive\" auth (SSH-2)",
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
'i', HELPCTX(ssh_auth_ki),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_try_ki_auth));
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
s = ctrl_getset(b, "Connection/SSH/Auth", "params",
"Authentication parameters");
ctrl_checkbox(s, "Allow agent forwarding", 'f',
HELPCTX(ssh_auth_agentfwd),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler, I(CONF_agentfwd));
Patch from Alejandro Sedeno, somewhat modified by me, which reorganises the GSSAPI support so that it handles alternative implementations of the GSS-API. In particular, this means PuTTY can now talk to MIT Kerberos for Windows instead of being limited to SSPI. I don't know for sure whether further tweaking will be needed (to the UI, most likely, or to automatic selection of credentials), but testing reports suggest it's now at least worth committing to trunk to get it more widely tested. [originally from svn r8952]
2010-05-19 22:22:17 +04:00
ctrl_checkbox(s, "Allow attempted changes of username in SSH-2", NO_SHORTCUT,
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
HELPCTX(ssh_auth_changeuser),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_change_username));
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
ctrl_filesel(s, "Private key file for authentication:", 'k',
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
FILTER_KEY_FILES, false, "Select private key file",
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
HELPCTX(ssh_auth_privkey),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_filesel_handler, I(CONF_keyfile));
Patch from Alejandro Sedeno, somewhat modified by me, which reorganises the GSSAPI support so that it handles alternative implementations of the GSS-API. In particular, this means PuTTY can now talk to MIT Kerberos for Windows instead of being limited to SSPI. I don't know for sure whether further tweaking will be needed (to the UI, most likely, or to automatic selection of credentials), but testing reports suggest it's now at least worth committing to trunk to get it more widely tested. [originally from svn r8952]
2010-05-19 22:22:17 +04:00
#ifndef NO_GSSAPI
Cleanups of the GSSAPI support. On Windows, standard GSS libraries are now loaded from standard locations (system32 for SSPI, the registry-stored MIT KfW install location for KfW) rather than using the risky default DLL search path; I've therefore also added an option to manually specify a GSS DLL we haven't heard of (which should in principle Just Work provided it supports proper GSS-API as specified in the RFC). The same option exists on Unix too, because it seemed like too useful an idea to reserve to Windows. In addition, GSSAPI is now documented, and also (unfortunately) its GUI configuration has been moved out into a sub-subpanel on the grounds that it was too big to fit in Auth. [originally from svn r9003]
2010-09-25 11:16:56 +04:00
/*
* Connection/SSH/Auth/GSSAPI, which sadly won't fit on
* the main Auth panel.
*/
ctrl_settitle(b, "Connection/SSH/Auth/GSSAPI",
"Options controlling GSSAPI authentication");
s = ctrl_getset(b, "Connection/SSH/Auth/GSSAPI", "gssapi", NULL);
ctrl_checkbox(s, "Attempt GSSAPI authentication (SSH-2 only)",
Since GSSAPI is now on its own panel, we may as well have a full set of keyboard shortcuts. [originally from svn r9008]
2010-09-25 19:51:14 +04:00
't', HELPCTX(ssh_gssapi),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_try_gssapi_auth));
Cleanups of the GSSAPI support. On Windows, standard GSS libraries are now loaded from standard locations (system32 for SSPI, the registry-stored MIT KfW install location for KfW) rather than using the risky default DLL search path; I've therefore also added an option to manually specify a GSS DLL we haven't heard of (which should in principle Just Work provided it supports proper GSS-API as specified in the RFC). The same option exists on Unix too, because it seemed like too useful an idea to reserve to Windows. In addition, GSSAPI is now documented, and also (unfortunately) its GUI configuration has been moved out into a sub-subpanel on the grounds that it was too big to fit in Auth. [originally from svn r9003]
2010-09-25 11:16:56 +04:00
Make GSS kex and GSS userauth separately configurable. The former has advantages in terms of keeping Kerberos credentials up to date, but it also does something sufficiently weird to the usual SSH host key system that I think it's worth making sure users have a means of turning it off separately from the less intrusive GSS userauth.
2018-04-26 21:15:15 +03:00
ctrl_checkbox(s, "Attempt GSSAPI key exchange (SSH-2 only)",
'k', HELPCTX(ssh_gssapi),
conf_checkbox_handler,
I(CONF_try_gssapi_kex));
Bah, r9008 caused an assertion failure on Windows due to a clash with the shortcuts for the preference list buttons. That'll teach me to only test the Gtk version. [originally from svn r9010] [r9008 == 5981b5e99d30effebe2ce2f7fd5a57d0eba15381]
2010-09-27 15:33:40 +04:00
ctrl_checkbox(s, "Allow GSSAPI credential delegation", 'l',
Cleanups of the GSSAPI support. On Windows, standard GSS libraries are now loaded from standard locations (system32 for SSPI, the registry-stored MIT KfW install location for KfW) rather than using the risky default DLL search path; I've therefore also added an option to manually specify a GSS DLL we haven't heard of (which should in principle Just Work provided it supports proper GSS-API as specified in the RFC). The same option exists on Unix too, because it seemed like too useful an idea to reserve to Windows. In addition, GSSAPI is now documented, and also (unfortunately) its GUI configuration has been moved out into a sub-subpanel on the grounds that it was too big to fit in Auth. [originally from svn r9003]
2010-09-25 11:16:56 +04:00
HELPCTX(ssh_gssapi_delegation),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_gssapifwd));
Cleanups of the GSSAPI support. On Windows, standard GSS libraries are now loaded from standard locations (system32 for SSPI, the registry-stored MIT KfW install location for KfW) rather than using the risky default DLL search path; I've therefore also added an option to manually specify a GSS DLL we haven't heard of (which should in principle Just Work provided it supports proper GSS-API as specified in the RFC). The same option exists on Unix too, because it seemed like too useful an idea to reserve to Windows. In addition, GSSAPI is now documented, and also (unfortunately) its GUI configuration has been moved out into a sub-subpanel on the grounds that it was too big to fit in Auth. [originally from svn r9003]
2010-09-25 11:16:56 +04:00
Patch from Alejandro Sedeno, somewhat modified by me, which reorganises the GSSAPI support so that it handles alternative implementations of the GSS-API. In particular, this means PuTTY can now talk to MIT Kerberos for Windows instead of being limited to SSPI. I don't know for sure whether further tweaking will be needed (to the UI, most likely, or to automatic selection of credentials), but testing reports suggest it's now at least worth committing to trunk to get it more widely tested. [originally from svn r8952]
2010-05-19 22:22:17 +04:00
/*
* GSSAPI library selection.
*/
if (ngsslibs > 1) {
Since GSSAPI is now on its own panel, we may as well have a full set of keyboard shortcuts. [originally from svn r9008]
2010-09-25 19:51:14 +04:00
c = ctrl_draglist(s, "Preference order for GSSAPI libraries:",
Bah, r9008 caused an assertion failure on Windows due to a clash with the shortcuts for the preference list buttons. That'll teach me to only test the Gtk version. [originally from svn r9010] [r9008 == 5981b5e99d30effebe2ce2f7fd5a57d0eba15381]
2010-09-27 15:33:40 +04:00
'p', HELPCTX(ssh_gssapi_libraries),
Patch from Alejandro Sedeno, somewhat modified by me, which reorganises the GSSAPI support so that it handles alternative implementations of the GSS-API. In particular, this means PuTTY can now talk to MIT Kerberos for Windows instead of being limited to SSPI. I don't know for sure whether further tweaking will be needed (to the UI, most likely, or to automatic selection of credentials), but testing reports suggest it's now at least worth committing to trunk to get it more widely tested. [originally from svn r8952]
2010-05-19 22:22:17 +04:00
gsslist_handler, P(NULL));
c->listbox.height = ngsslibs;
Cleanups of the GSSAPI support. On Windows, standard GSS libraries are now loaded from standard locations (system32 for SSPI, the registry-stored MIT KfW install location for KfW) rather than using the risky default DLL search path; I've therefore also added an option to manually specify a GSS DLL we haven't heard of (which should in principle Just Work provided it supports proper GSS-API as specified in the RFC). The same option exists on Unix too, because it seemed like too useful an idea to reserve to Windows. In addition, GSSAPI is now documented, and also (unfortunately) its GUI configuration has been moved out into a sub-subpanel on the grounds that it was too big to fit in Auth. [originally from svn r9003]
2010-09-25 11:16:56 +04:00
/*
* I currently assume that if more than one GSS
* library option is available, then one of them is
* 'user-supplied' and so we should present the
* following file selector. This is at least half-
* reasonable, because if we're using statically
* linked GSSAPI then there will only be one option
* and no way to load from a user-supplied library,
* whereas if we're using dynamic libraries then
* there will almost certainly be some default
* option in addition to a user-supplied path. If
* anyone ever ports PuTTY to a system on which
* dynamic-library GSSAPI is available but there is
* absolutely no consensus on where to keep the
* libraries, there'll need to be a flag alongside
* ngsslibs to control whether the file selector is
* displayed.
*/
Bah, r9008 caused an assertion failure on Windows due to a clash with the shortcuts for the preference list buttons. That'll teach me to only test the Gtk version. [originally from svn r9010] [r9008 == 5981b5e99d30effebe2ce2f7fd5a57d0eba15381]
2010-09-27 15:33:40 +04:00
ctrl_filesel(s, "User-supplied GSSAPI library path:", 's',
Adopt C99 <stdbool.h>'s true/false. This commit includes <stdbool.h> from defs.h and deletes my traditional definitions of TRUE and FALSE, but other than that, it's a 100% mechanical search-and-replace transforming all uses of TRUE and FALSE into the C99-standardised lowercase spellings. No actual types are changed in this commit; that will come next. This is just getting the noise out of the way, so that subsequent commits can have a higher proportion of signal.
2018-10-29 22:50:29 +03:00
FILTER_DYNLIB_FILES, false, "Select library file",
Cleanups of the GSSAPI support. On Windows, standard GSS libraries are now loaded from standard locations (system32 for SSPI, the registry-stored MIT KfW install location for KfW) rather than using the risky default DLL search path; I've therefore also added an option to manually specify a GSS DLL we haven't heard of (which should in principle Just Work provided it supports proper GSS-API as specified in the RFC). The same option exists on Unix too, because it seemed like too useful an idea to reserve to Windows. In addition, GSSAPI is now documented, and also (unfortunately) its GUI configuration has been moved out into a sub-subpanel on the grounds that it was too big to fit in Auth. [originally from svn r9003]
2010-09-25 11:16:56 +04:00
HELPCTX(ssh_gssapi_libraries),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_filesel_handler,
I(CONF_ssh_gss_custom));
Patch from Alejandro Sedeno, somewhat modified by me, which reorganises the GSSAPI support so that it handles alternative implementations of the GSS-API. In particular, this means PuTTY can now talk to MIT Kerberos for Windows instead of being limited to SSPI. I don't know for sure whether further tweaking will be needed (to the UI, most likely, or to automatic selection of credentials), but testing reports suggest it's now at least worth committing to trunk to get it more widely tested. [originally from svn r8952]
2010-05-19 22:22:17 +04:00
}
#endif
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
}
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
if (!midsession) {
/*
* The Connection/SSH/TTY panel.
*/
ctrl_settitle(b, "Connection/SSH/TTY", "Remote terminal settings");
s = ctrl_getset(b, "Connection/SSH/TTY", "sshtty", NULL);
ctrl_checkbox(s, "Don't allocate a pseudo-terminal", 'p',
HELPCTX(ssh_nopty),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_nopty));
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
s = ctrl_getset(b, "Connection/SSH/TTY", "ttymodes",
"Terminal modes");
td = (struct ttymodes_data *)
ctrl_alloc(b, sizeof(struct ttymodes_data));
Remove some redundant variables and assignments. This fixes a batch of clang-analyzer warnings of the form 'you declared / assigned this variable and then never use it'. It doesn't fix _all_ of them - some are there so that when I add code in the future _it_ can use the variable without me having to remember to start setting it - but these are the ones I thought it would make the code better instead of worse to fix.
2018-12-01 17:06:44 +03:00
ctrl_text(s, "Terminal modes to send:", HELPCTX(ssh_ttymodes));
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
td->listbox = ctrl_listbox(s, NULL, NO_SHORTCUT,
HELPCTX(ssh_ttymodes),
ttymodes_handler, P(td));
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
td->listbox->listbox.height = 8;
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
td->listbox->listbox.ncols = 2;
td->listbox->listbox.percentages = snewn(2, int);
td->listbox->listbox.percentages[0] = 40;
td->listbox->listbox.percentages[1] = 60;
ctrl_columns(s, 2, 75, 25);
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
c = ctrl_text(s, "For selected mode, send:", HELPCTX(ssh_ttymodes));
c->generic.column = 0;
td->setbutton = ctrl_pushbutton(s, "Set", 's',
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
HELPCTX(ssh_ttymodes),
ttymodes_handler, P(td));
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
td->setbutton->generic.column = 1;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
td->setbutton->generic.tabdelay = true;
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
ctrl_columns(s, 1, 100); /* column break */
/* Bit of a hack to get the value radio buttons and
* edit-box on the same row. */
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
ctrl_columns(s, 2, 75, 25);
td->valradio = ctrl_radiobuttons(s, NULL, NO_SHORTCUT, 3,
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
HELPCTX(ssh_ttymodes),
ttymodes_handler, P(td),
"Auto", NO_SHORTCUT, P(NULL),
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
"Nothing", NO_SHORTCUT, P(NULL),
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
"This:", NO_SHORTCUT, P(NULL),
NULL);
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
td->valradio->generic.column = 0;
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
td->valbox = ctrl_editbox(s, NULL, NO_SHORTCUT, 100,
HELPCTX(ssh_ttymodes),
ttymodes_handler, P(td), P(NULL));
Restore ability to not send SSH terminal modes. 2ce0b680c inadvertently removed this ability in trying to ensure that everyone got the new IUTF8 mode by default; you could remove a mode from the list in the UI, but this would just revert PuTTY to its default. The UI and storage have been revamped; the storage format now explicitly says when a mode is not to be sent, and the configuration UI always shows all modes known to PuTTY; if a mode is not to be sent it now shows up as "(don't send)" in the list. Old saved settings are migrated so as to preserve previous removals of longstanding modes, while automatically adding IUTF8. (In passing, this removes a bug where pressing the 'Remove' button of the previous UI would populate the value edit box with garbage.)
2017-03-06 13:36:26 +03:00
td->valbox->generic.column = 1;
ctrl_tabdelay(s, td->setbutton);
First crack at `terminal-modes' in SSH. PuTTY now sends ERASE by default, Unix Plink sends everything sensible it can find, and it's fully configurable from the GUI. I'm not entirely sure about the precise set of modes that Unix Plink should look at; informed tweaks are welcome. Also the Mac bits are guesses (but trivial). [originally from svn r5653] [this svn revision also touched putty-wishlist]
2005-04-21 17:57:08 +04:00
}
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
if (!midsession) {
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
/*
* The Connection/SSH/X11 panel.
*/
ctrl_settitle(b, "Connection/SSH/X11",
"Options controlling SSH X11 forwarding");
s = ctrl_getset(b, "Connection/SSH/X11", "x11", "X11 forwarding");
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
ctrl_checkbox(s, "Enable X11 forwarding", 'e',
HELPCTX(ssh_tunnels_x11),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,I(CONF_x11_forward));
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
ctrl_editbox(s, "X display location", 'x', 50,
HELPCTX(ssh_tunnels_x11),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_editbox_handler, I(CONF_x11_display), I(1));
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
ctrl_radiobuttons(s, "Remote X11 authentication protocol", 'u', 2,
HELPCTX(ssh_tunnels_x11auth),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_radiobutton_handler,
I(CONF_x11_auth),
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
"MIT-Magic-Cookie-1", I(X11_MIT),
"XDM-Authorization-1", I(X11_XDM), NULL);
}
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
/*
* The Tunnels panel _is_ still available in mid-session.
*/
ctrl_settitle(b, "Connection/SSH/Tunnels",
"Options controlling SSH port forwarding");
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
s = ctrl_getset(b, "Connection/SSH/Tunnels", "portfwd",
"Port forwarding");
ctrl_checkbox(s, "Local ports accept connections from other hosts",'t',
HELPCTX(ssh_tunnels_portfwd_localhost),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_lport_acceptall));
Consistently use a single notation to refer to SSH protocol versions, as discussed. Use Barrett and Silverman's convention of "SSH-1" for SSH protocol version 1 and "SSH-2" for protocol 2 ("SSH1"/"SSH2" refer to ssh.com implementations in this scheme). <http://www.snailbook.com/terms.html> [originally from svn r5480]
2005-03-10 19:36:05 +03:00
ctrl_checkbox(s, "Remote ports do the same (SSH-2 only)", 'p',
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
HELPCTX(ssh_tunnels_portfwd_localhost),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_checkbox_handler,
I(CONF_rport_acceptall));
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_columns(s, 3, 55, 20, 25);
c = ctrl_text(s, "Forwarded ports:", HELPCTX(ssh_tunnels_portfwd));
c->generic.column = COLUMN_FIELD(0,2);
/* You want to select from the list, _then_ hit Remove. So tab order
* should be that way round. */
pfd = (struct portfwd_data *)ctrl_alloc(b,sizeof(struct portfwd_data));
pfd->rembutton = ctrl_pushbutton(s, "Remove", 'r',
HELPCTX(ssh_tunnels_portfwd),
portfwd_handler, P(pfd));
pfd->rembutton->generic.column = 2;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
pfd->rembutton->generic.tabdelay = true;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
pfd->listbox = ctrl_listbox(s, NULL, NO_SHORTCUT,
HELPCTX(ssh_tunnels_portfwd),
portfwd_handler, P(pfd));
pfd->listbox->listbox.height = 3;
Windows sets automatic tabs in list boxes, but GTK doesn't, so we should make the tab stop in the forwarded-ports list explicit. [originally from svn r2937]
2003-03-15 18:49:04 +03:00
pfd->listbox->listbox.ncols = 2;
Introduced wrapper macros snew(), snewn() and sresize() for the malloc functions, which automatically cast to the same type they're allocating the size of. Should prevent any future errors involving mallocing the size of the wrong structure type, and will also make life easier if we ever need to turn the PuTTY core code from real C into C++-friendly C. I haven't touched the Mac frontend in this checkin because I couldn't compile or test it. [originally from svn r3014]
2003-03-29 19:14:26 +03:00
pfd->listbox->listbox.percentages = snewn(2, int);
Windows sets automatic tabs in list boxes, but GTK doesn't, so we should make the tab stop in the forwarded-ports list explicit. [originally from svn r2937]
2003-03-15 18:49:04 +03:00
pfd->listbox->listbox.percentages[0] = 20;
pfd->listbox->listbox.percentages[1] = 80;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_tabdelay(s, pfd->rembutton);
ctrl_text(s, "Add new forwarded port:", HELPCTX(ssh_tunnels_portfwd));
/* You want to enter source, destination and type, _then_ hit Add.
* Again, we adjust the tab order to reflect this. */
pfd->addbutton = ctrl_pushbutton(s, "Add", 'd',
HELPCTX(ssh_tunnels_portfwd),
portfwd_handler, P(pfd));
pfd->addbutton->generic.column = 2;
Convert a lot of 'int' variables to 'bool'. My normal habit these days, in new code, is to treat int and bool as _almost_ completely separate types. I'm still willing to use C's implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine, no need to spell it out as blob.len != 0), but generally, if a variable is going to be conceptually a boolean, I like to declare it bool and assign to it using 'true' or 'false' rather than 0 or 1. PuTTY is an exception, because it predates the C99 bool, and I've stuck to its existing coding style even when adding new code to it. But it's been annoying me more and more, so now that I've decided C99 bool is an acceptable thing to require from our toolchain in the first place, here's a quite thorough trawl through the source doing 'boolification'. Many variables and function parameters are now typed as bool rather than int; many assignments of 0 or 1 to those variables are now spelled 'true' or 'false'. I managed this thorough conversion with the help of a custom clang plugin that I wrote to trawl the AST and apply heuristics to point out where things might want changing. So I've even managed to do a decent job on parts of the code I haven't looked at in years! To make the plugin's work easier, I pushed platform front ends generally in the direction of using standard 'bool' in preference to platform-specific boolean types like Windows BOOL or GTK's gboolean; I've left the platform booleans in places they _have_ to be for the platform APIs to work right, but variables only used by my own code have been converted wherever I found them. In a few places there are int values that look very like booleans in _most_ of the places they're used, but have a rarely-used third value, or a distinction between different nonzero values that most users don't care about. In these cases, I've _removed_ uses of 'true' and 'false' for the return values, to emphasise that there's something more subtle going on than a simple boolean answer: - the 'multisel' field in dialog.h's list box structure, for which the GTK front end in particular recognises a difference between 1 and 2 but nearly everything else treats as boolean - the 'urgent' parameter to plug_receive, where 1 vs 2 tells you something about the specific location of the urgent pointer, but most clients only care about 0 vs 'something nonzero' - the return value of wc_match, where -1 indicates a syntax error in the wildcard. - the return values from SSH-1 RSA-key loading functions, which use -1 for 'wrong passphrase' and 0 for all other failures (so any caller which already knows it's not loading an _encrypted private_ key can treat them as boolean) - term->esc_query, and the 'query' parameter in toggle_mode in terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h, but can also hold -1 for some other intervening character that we don't support. In a few places there's an integer that I haven't turned into a bool even though it really _can_ only take values 0 or 1 (and, as above, tried to make the call sites consistent in not calling those values true and false), on the grounds that I thought it would make it more confusing to imply that the 0 value was in some sense 'negative' or bad and the 1 positive or good: - the return value of plug_accepting uses the POSIXish convention of 0=success and nonzero=error; I think if I made it bool then I'd also want to reverse its sense, and that's a job for a separate piece of work. - the 'screen' parameter to lineptr() in terminal.c, where 0 and 1 represent the default and alternate screens. There's no obvious reason why one of those should be considered 'true' or 'positive' or 'success' - they're just indices - so I've left it as int. ssh_scp_recv had particularly confusing semantics for its previous int return value: its call sites used '<= 0' to check for error, but it never actually returned a negative number, just 0 or 1. Now the function and its call sites agree that it's a bool. In a couple of places I've renamed variables called 'ret', because I don't like that name any more - it's unclear whether it means the return value (in preparation) for the _containing_ function or the return value received from a subroutine call, and occasionally I've accidentally used the same variable for both and introduced a bug. So where one of those got in my way, I've renamed it to 'toret' or 'retd' (the latter short for 'returned') in line with my usual modern practice, but I haven't done a thorough job of finding all of them. Finally, one amusing side effect of doing this is that I've had to separate quite a few chained assignments. It used to be perfectly fine to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a the 'true' defined by stdbool.h, that idiom provokes a warning from gcc: 'suggest parentheses around assignment used as truth value'!
2018-11-02 22:23:19 +03:00
pfd->addbutton->generic.tabdelay = true;
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
pfd->sourcebox = ctrl_editbox(s, "Source port", 's', 40,
HELPCTX(ssh_tunnels_portfwd),
portfwd_handler, P(pfd), P(NULL));
pfd->sourcebox->generic.column = 0;
pfd->destbox = ctrl_editbox(s, "Destination", 'i', 67,
HELPCTX(ssh_tunnels_portfwd),
portfwd_handler, P(pfd), P(NULL));
Dynamic port forwarding by means of a local SOCKS server. Fully supports SOCKS 4, SOCKS 4A and SOCKS 5 (well, actually IPv6 in SOCKS 5 isn't supported, but it'll be no difficulty once I actually get round to it). Thanks to Chas Honton for his `stone soup' patch: I didn't end up actually using any of his code, but it galvanised me into doing it properly myself :-) [originally from svn r3055]
2003-04-05 15:45:21 +04:00
pfd->direction = ctrl_radiobuttons(s, NULL, NO_SHORTCUT, 3,
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
HELPCTX(ssh_tunnels_portfwd),
portfwd_handler, P(pfd),
"Local", 'l', P(NULL),
Dynamic port forwarding by means of a local SOCKS server. Fully supports SOCKS 4, SOCKS 4A and SOCKS 5 (well, actually IPv6 in SOCKS 5 isn't supported, but it'll be no difficulty once I actually get round to it). Thanks to Chas Honton for his `stone soup' patch: I didn't end up actually using any of his code, but it galvanised me into doing it properly myself :-) [originally from svn r3055]
2003-04-05 15:45:21 +04:00
"Remote", 'm', P(NULL),
"Dynamic", 'y', P(NULL),
NULL);
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
#ifndef NO_IPV6
I've changed my mind about what the IP version selection options in the config should do when IPv6 is configured out. They shouldn't sit there looking silly with only `Auto' and `IPv4' settings: they should instead be completely absent. I had thought the former was acceptable since IPv4-only was a configuration that people should only be using if their compilers didn't support IPv6, but now it occurs to me that ports to fundamentally non-IPv6-supporting platforms are not implausible, and on such ports the presence of a vestigial config option under the _standard_ build conditions would be a low-quality solution. [originally from svn r5084]
2005-01-09 14:44:21 +03:00
pfd->addressfamily =
ctrl_radiobuttons(s, NULL, NO_SHORTCUT, 3,
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
HELPCTX(ssh_tunnels_portfwd_ipversion),
portfwd_handler, P(pfd),
Add keyboard accelerators for IPv4/IPv6 selections options. (Also for `window_border'.) [originally from svn r5610]
2005-04-07 05:42:36 +04:00
"Auto", 'u', I(ADDRTYPE_UNSPEC),
"IPv4", '4', I(ADDRTYPE_IPV4),
"IPv6", '6', I(ADDRTYPE_IPV6),
Integrate unfix.org's IPv6 patches up to level 10, with rather a lot of polishing to bring them to what I think should in principle be release quality. Unlike the unfix.org patches themselves, this checkin enables IPv6 by default; if you want to leave it out, you have to build with COMPAT=-DNO_IPV6. I have tested that this compiles on Visual C 7 (so the nightlies _should_ acquire IPv6 support without missing a beat), but since I don't have IPv6 set up myself I haven't actually tested that it _works_. It still seems to make correct IPv4 connections, but that's all I've been able to verify for myself. Further testing is needed. [originally from svn r5047] [this svn revision also touched putty-wishlist]
2004-12-30 19:45:11 +03:00
NULL);
I've changed my mind about what the IP version selection options in the config should do when IPv6 is configured out. They shouldn't sit there looking silly with only `Auto' and `IPv4' settings: they should instead be completely absent. I had thought the former was acceptable since IPv4-only was a configuration that people should only be using if their compilers didn't support IPv6, but now it occurs to me that ports to fundamentally non-IPv6-supporting platforms are not implausible, and on such ports the presence of a vestigial config option under the _standard_ build conditions would be a low-quality solution. [originally from svn r5084]
2005-01-09 14:44:21 +03:00
#endif
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
ctrl_tabdelay(s, pfd->addbutton);
ctrl_columns(s, 1, 100);
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
if (!midsession) {
/*
Divide the Bugs panel in half. It overflowed as a result of the previous commit.
2015-04-25 12:46:56 +03:00
* The Connection/SSH/Bugs panels.
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
*/
ctrl_settitle(b, "Connection/SSH/Bugs",
"Workarounds for SSH server bugs");
s = ctrl_getset(b, "Connection/SSH/Bugs", "main",
"Detection of known bugs in SSH servers");
New SSH bug flag, for 'can't handle SSH2_MSG_IGNORE'. Another user today reported an SSH2_MSG_UNIMPLEMENTED from a Cisco router which looks as if it was triggered by SSH2_MSG_IGNORE, so I'm experimentally putting this flag in. Currently must be manually enabled, though if it turns out to solve the user's problem then I'll probably add at least one version string... [Edited commit message: actually, I also committed in error a piece of experimental code as part of this checkin. Serve me right for not running 'svn diff' first.] [originally from svn r8926]
2010-04-23 22:32:15 +04:00
ctrl_droplist(s, "Chokes on SSH-2 ignore messages", '2', 20,
HELPCTX(ssh_bugs_ignore2),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
sshbug_handler, I(CONF_sshbug_ignore2));
Reorganise the Bugs and More Bugs config panels. Now bugs that are still likely to come up with relatively recent server software (because they're only a few years fixed, or because they're the sort of mistake that new server implementors will likely make again) are in the Bugs panel, and very old things long since fixed are relegated to More Bugs. In particular, More Bugs contains everything SSH-1 related.
2016-04-03 20:16:44 +03:00
ctrl_droplist(s, "Handles SSH-2 key re-exchange badly", 'k', 20,
HELPCTX(ssh_bugs_rekey2),
sshbug_handler, I(CONF_sshbug_rekey2));
Add a bug-compatibility flag to disable the winadj@putty.projects.tartarus.org request. Not currently enabled automatically, but should be usable as a manual workaround. [originally from svn r9592]
2012-07-28 23:30:12 +04:00
ctrl_droplist(s, "Chokes on PuTTY's SSH-2 'winadj' requests", 'j',
20, HELPCTX(ssh_bugs_winadj),
sshbug_handler, I(CONF_sshbug_winadj));
Reorganise the Bugs and More Bugs config panels. Now bugs that are still likely to come up with relatively recent server software (because they're only a few years fixed, or because they're the sort of mistake that new server implementors will likely make again) are in the Bugs panel, and very old things long since fixed are relegated to More Bugs. In particular, More Bugs contains everything SSH-1 related.
2016-04-03 20:16:44 +03:00
ctrl_droplist(s, "Replies to requests on closed channels", 'q', 20,
HELPCTX(ssh_bugs_chanreq),
sshbug_handler, I(CONF_sshbug_chanreq));
ctrl_droplist(s, "Ignores SSH-2 maximum packet size", 'x', 20,
HELPCTX(ssh_bugs_maxpkt2),
sshbug_handler, I(CONF_sshbug_maxpkt2));
Divide the Bugs panel in half. It overflowed as a result of the previous commit.
2015-04-25 12:46:56 +03:00
ctrl_settitle(b, "Connection/SSH/More bugs",
"Further workarounds for SSH server bugs");
s = ctrl_getset(b, "Connection/SSH/More bugs", "main",
"Detection of known bugs in SSH servers");
Consistently use a single notation to refer to SSH protocol versions, as discussed. Use Barrett and Silverman's convention of "SSH-1" for SSH protocol version 1 and "SSH-2" for protocol 2 ("SSH1"/"SSH2" refer to ssh.com implementations in this scheme). <http://www.snailbook.com/terms.html> [originally from svn r5480]
2005-03-10 19:36:05 +03:00
ctrl_droplist(s, "Requires padding on SSH-2 RSA signatures", 'p', 20,
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
HELPCTX(ssh_bugs_rsapad2),
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
sshbug_handler, I(CONF_sshbug_rsapad2));
Support RFC 4419. PuTTY now uses the updated version of Diffie-Hellman group exchange, except for a few old OpenSSH versions which Darren Tucker reports only support the old version. FIXME: this needs further work because the Bugs config panel has now overflowed.
2015-04-25 12:46:53 +03:00
ctrl_droplist(s, "Only supports pre-RFC4419 SSH-2 DH GEX", 'd', 20,
HELPCTX(ssh_bugs_oldgex2),
sshbug_handler, I(CONF_sshbug_oldgex2));
Reorganise the Bugs and More Bugs config panels. Now bugs that are still likely to come up with relatively recent server software (because they're only a few years fixed, or because they're the sort of mistake that new server implementors will likely make again) are in the Bugs panel, and very old things long since fixed are relegated to More Bugs. In particular, More Bugs contains everything SSH-1 related.
2016-04-03 20:16:44 +03:00
ctrl_droplist(s, "Miscomputes SSH-2 HMAC keys", 'm', 20,
HELPCTX(ssh_bugs_hmac2),
sshbug_handler, I(CONF_sshbug_hmac2));
ctrl_droplist(s, "Misuses the session ID in SSH-2 PK auth", 'n', 20,
HELPCTX(ssh_bugs_pksessid2),
sshbug_handler, I(CONF_sshbug_pksessid2));
ctrl_droplist(s, "Miscomputes SSH-2 encryption keys", 'e', 20,
HELPCTX(ssh_bugs_derivekey2),
sshbug_handler, I(CONF_sshbug_derivekey2));
ctrl_droplist(s, "Chokes on SSH-1 ignore messages", 'i', 20,
HELPCTX(ssh_bugs_ignore1),
sshbug_handler, I(CONF_sshbug_ignore1));
ctrl_droplist(s, "Refuses all SSH-1 password camouflage", 's', 20,
HELPCTX(ssh_bugs_plainpw1),
sshbug_handler, I(CONF_sshbug_plainpw1));
ctrl_droplist(s, "Chokes on SSH-1 RSA authentication", 'r', 20,
HELPCTX(ssh_bugs_rsa1),
sshbug_handler, I(CONF_sshbug_rsa1));
SSH port forwarding is now configurable in mid-session. After doing Change Settings, the port forwarding setup function is run again, and tags all existing port forwardings as `do not keep'. Then it iterates through the config in the normal way; when it encounters a port forwarding which is already in the tree, it tags it `keep' rather than setting it up from scratch. Finally, it goes through the tree and removes any that haven't been labelled `keep'. Hence, editing the list of forwardings in Change Settings has the effect of cancelling any forwardings you remove, and adding any new ones. The SSH panel now appears in the reconfig box, and is empty apart from a message explaining that it has to be there for subpanels of it to exist. Better wording for this message would be welcome. [originally from svn r5030]
2004-12-28 17:07:05 +03:00
}
The long-awaited config box revamp! I've taken the whole config box to pieces, and put it back together in a new table-driven form. config.c sets up a data structure describing most of the config box; wincfg.c adds in the Windows-specific options (so that config.c can also form the basis for Mac and Unix config boxes). Then winctrls.c contains a shiny new layout engine which consumes that data structure, and windlg.c passes all WM_COMMAND and similar messages to a driver alongside that layout engine. In the process I've sorted out nicer-looking panel titles and finally fixed the list-boxes-are- never-the-right-size bug (turned out to be Windows's fault, of course). I _believe_ it should do everything the old config box did, including context help. Now everyone has to test it thoroughly... [originally from svn r2908]
2003-03-06 01:07:40 +03:00
}
}