putty/telnet.c

1122 строки
31 KiB
C
Исходник Обычный вид История

/*
* Telnet backend.
*/
#include <stdio.h>
#include <stdlib.h>
#include <limits.h>
#include "putty.h"
#ifndef FALSE
#define FALSE 0
#endif
#ifndef TRUE
#define TRUE 1
#endif
#define IAC 255 /* interpret as command: */
#define DONT 254 /* you are not to use option */
#define DO 253 /* please, you use option */
#define WONT 252 /* I won't use option */
#define WILL 251 /* I will use option */
#define SB 250 /* interpret as subnegotiation */
#define SE 240 /* end sub negotiation */
#define GA 249 /* you may reverse the line */
#define EL 248 /* erase the current line */
#define EC 247 /* erase the current character */
#define AYT 246 /* are you there */
#define AO 245 /* abort output--but let prog finish */
#define IP 244 /* interrupt process--permanently */
#define BREAK 243 /* break */
#define DM 242 /* data mark--for connect. cleaning */
#define NOP 241 /* nop */
#define EOR 239 /* end of record (transparent mode) */
#define ABORT 238 /* Abort process */
#define SUSP 237 /* Suspend process */
#define xEOF 236 /* End of file: EOF is already used... */
#define TELOPTS(X) \
X(BINARY, 0) /* 8-bit data path */ \
X(ECHO, 1) /* echo */ \
X(RCP, 2) /* prepare to reconnect */ \
X(SGA, 3) /* suppress go ahead */ \
X(NAMS, 4) /* approximate message size */ \
X(STATUS, 5) /* give status */ \
X(TM, 6) /* timing mark */ \
X(RCTE, 7) /* remote controlled transmission and echo */ \
X(NAOL, 8) /* negotiate about output line width */ \
X(NAOP, 9) /* negotiate about output page size */ \
X(NAOCRD, 10) /* negotiate about CR disposition */ \
X(NAOHTS, 11) /* negotiate about horizontal tabstops */ \
X(NAOHTD, 12) /* negotiate about horizontal tab disposition */ \
X(NAOFFD, 13) /* negotiate about formfeed disposition */ \
X(NAOVTS, 14) /* negotiate about vertical tab stops */ \
X(NAOVTD, 15) /* negotiate about vertical tab disposition */ \
X(NAOLFD, 16) /* negotiate about output LF disposition */ \
X(XASCII, 17) /* extended ascic character set */ \
X(LOGOUT, 18) /* force logout */ \
X(BM, 19) /* byte macro */ \
X(DET, 20) /* data entry terminal */ \
X(SUPDUP, 21) /* supdup protocol */ \
X(SUPDUPOUTPUT, 22) /* supdup output */ \
X(SNDLOC, 23) /* send location */ \
X(TTYPE, 24) /* terminal type */ \
X(EOR, 25) /* end or record */ \
X(TUID, 26) /* TACACS user identification */ \
X(OUTMRK, 27) /* output marking */ \
X(TTYLOC, 28) /* terminal location number */ \
X(3270REGIME, 29) /* 3270 regime */ \
X(X3PAD, 30) /* X.3 PAD */ \
X(NAWS, 31) /* window size */ \
X(TSPEED, 32) /* terminal speed */ \
X(LFLOW, 33) /* remote flow control */ \
X(LINEMODE, 34) /* Linemode option */ \
X(XDISPLOC, 35) /* X Display Location */ \
X(OLD_ENVIRON, 36) /* Old - Environment variables */ \
X(AUTHENTICATION, 37) /* Authenticate */ \
X(ENCRYPT, 38) /* Encryption option */ \
X(NEW_ENVIRON, 39) /* New - Environment variables */ \
X(TN3270E, 40) /* TN3270 enhancements */ \
X(XAUTH, 41) \
X(CHARSET, 42) /* Character set */ \
X(RSP, 43) /* Remote serial port */ \
X(COM_PORT_OPTION, 44) /* Com port control */ \
X(SLE, 45) /* Suppress local echo */ \
X(STARTTLS, 46) /* Start TLS */ \
X(KERMIT, 47) /* Automatic Kermit file transfer */ \
X(SEND_URL, 48) \
X(FORWARD_X, 49) \
X(PRAGMA_LOGON, 138) \
X(SSPI_LOGON, 139) \
X(PRAGMA_HEARTBEAT, 140) \
X(EXOPL, 255) /* extended-options-list */
#define telnet_enum(x,y) TELOPT_##x = y,
enum { TELOPTS(telnet_enum) dummy=0 };
#undef telnet_enum
#define TELQUAL_IS 0 /* option is... */
#define TELQUAL_SEND 1 /* send option */
#define TELQUAL_INFO 2 /* ENVIRON: informational version of IS */
#define BSD_VAR 1
#define BSD_VALUE 0
#define RFC_VAR 0
#define RFC_VALUE 1
#define CR 13
#define LF 10
#define NUL 0
#define iswritable(x) \
( (x) != IAC && \
(telnet->opt_states[o_we_bin.index] == ACTIVE || (x) != CR))
static const char *telopt(int opt)
{
#define telnet_str(x,y) case TELOPT_##x: return #x;
switch (opt) {
TELOPTS(telnet_str)
default:
return "<unknown>";
}
#undef telnet_str
}
static void telnet_size(void *handle, int width, int height);
struct Opt {
int send; /* what we initially send */
int nsend; /* -ve send if requested to stop it */
int ack, nak; /* +ve and -ve acknowledgements */
int option; /* the option code */
int index; /* index into telnet->opt_states[] */
enum {
REQUESTED, ACTIVE, INACTIVE, REALLY_INACTIVE
} initial_state;
};
enum {
OPTINDEX_NAWS,
OPTINDEX_TSPEED,
OPTINDEX_TTYPE,
OPTINDEX_OENV,
OPTINDEX_NENV,
OPTINDEX_ECHO,
OPTINDEX_WE_SGA,
OPTINDEX_THEY_SGA,
OPTINDEX_WE_BIN,
OPTINDEX_THEY_BIN,
NUM_OPTS
};
static const struct Opt o_naws =
{ WILL, WONT, DO, DONT, TELOPT_NAWS, OPTINDEX_NAWS, REQUESTED };
static const struct Opt o_tspeed =
{ WILL, WONT, DO, DONT, TELOPT_TSPEED, OPTINDEX_TSPEED, REQUESTED };
static const struct Opt o_ttype =
{ WILL, WONT, DO, DONT, TELOPT_TTYPE, OPTINDEX_TTYPE, REQUESTED };
static const struct Opt o_oenv =
{ WILL, WONT, DO, DONT, TELOPT_OLD_ENVIRON, OPTINDEX_OENV, INACTIVE };
static const struct Opt o_nenv =
{ WILL, WONT, DO, DONT, TELOPT_NEW_ENVIRON, OPTINDEX_NENV, REQUESTED };
static const struct Opt o_echo =
{ DO, DONT, WILL, WONT, TELOPT_ECHO, OPTINDEX_ECHO, REQUESTED };
static const struct Opt o_we_sga =
{ WILL, WONT, DO, DONT, TELOPT_SGA, OPTINDEX_WE_SGA, REQUESTED };
static const struct Opt o_they_sga =
{ DO, DONT, WILL, WONT, TELOPT_SGA, OPTINDEX_THEY_SGA, REQUESTED };
static const struct Opt o_we_bin =
{ WILL, WONT, DO, DONT, TELOPT_BINARY, OPTINDEX_WE_BIN, INACTIVE };
static const struct Opt o_they_bin =
{ DO, DONT, WILL, WONT, TELOPT_BINARY, OPTINDEX_THEY_BIN, INACTIVE };
static const struct Opt *const opts[] = {
&o_naws, &o_tspeed, &o_ttype, &o_oenv, &o_nenv, &o_echo,
&o_we_sga, &o_they_sga, &o_we_bin, &o_they_bin, NULL
};
typedef struct telnet_tag {
const struct plug_function_table *fn;
/* the above field _must_ be first in the structure */
Socket s;
int closed_on_socket_error;
void *frontend;
void *ldisc;
int term_width, term_height;
int opt_states[NUM_OPTS];
int echoing, editing;
int activated;
int bufsize;
int in_synch;
int sb_opt, sb_len;
unsigned char *sb_buf;
int sb_size;
int session_started;
enum {
TOP_LEVEL, SEENIAC, SEENWILL, SEENWONT, SEENDO, SEENDONT,
SEENSB, SUBNEGOT, SUBNEG_IAC, SEENCR
} state;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
Conf *conf;
Pinger pinger;
} *Telnet;
#define TELNET_MAX_BACKLOG 4096
#define SB_DELTA 1024
static void c_write(Telnet telnet, const char *buf, int len)
{
int backlog;
backlog = from_backend(telnet->frontend, 0, buf, len);
sk_set_frozen(telnet->s, backlog > TELNET_MAX_BACKLOG);
}
static void log_option(Telnet telnet, const char *sender, int cmd, int option)
{
char *buf;
/*
* The strange-looking "<?""?>" below is there to avoid a
* trigraph - a double question mark followed by > maps to a
* closing brace character!
*/
buf = dupprintf("%s:\t%s %s", sender,
(cmd == WILL ? "WILL" : cmd == WONT ? "WONT" :
cmd == DO ? "DO" : cmd == DONT ? "DONT" : "<?""?>"),
telopt(option));
logevent(telnet->frontend, buf);
sfree(buf);
}
static void send_opt(Telnet telnet, int cmd, int option)
{
unsigned char b[3];
b[0] = IAC;
b[1] = cmd;
b[2] = option;
telnet->bufsize = sk_write(telnet->s, (char *)b, 3);
log_option(telnet, "client", cmd, option);
}
static void deactivate_option(Telnet telnet, const struct Opt *o)
{
if (telnet->opt_states[o->index] == REQUESTED ||
telnet->opt_states[o->index] == ACTIVE)
send_opt(telnet, o->nsend, o->option);
telnet->opt_states[o->index] = REALLY_INACTIVE;
}
/*
* Generate side effects of enabling or disabling an option.
*/
static void option_side_effects(Telnet telnet, const struct Opt *o, int enabled)
{
if (o->option == TELOPT_ECHO && o->send == DO)
telnet->echoing = !enabled;
else if (o->option == TELOPT_SGA && o->send == DO)
telnet->editing = !enabled;
if (telnet->ldisc) /* cause ldisc to notice the change */
ldisc_echoedit_update(telnet->ldisc);
/* Ensure we get the minimum options */
if (!telnet->activated) {
if (telnet->opt_states[o_echo.index] == INACTIVE) {
telnet->opt_states[o_echo.index] = REQUESTED;
send_opt(telnet, o_echo.send, o_echo.option);
}
if (telnet->opt_states[o_we_sga.index] == INACTIVE) {
telnet->opt_states[o_we_sga.index] = REQUESTED;
send_opt(telnet, o_we_sga.send, o_we_sga.option);
}
if (telnet->opt_states[o_they_sga.index] == INACTIVE) {
telnet->opt_states[o_they_sga.index] = REQUESTED;
send_opt(telnet, o_they_sga.send, o_they_sga.option);
}
telnet->activated = TRUE;
}
}
static void activate_option(Telnet telnet, const struct Opt *o)
{
if (o->send == WILL && o->option == TELOPT_NAWS)
telnet_size(telnet, telnet->term_width, telnet->term_height);
if (o->send == WILL &&
(o->option == TELOPT_NEW_ENVIRON ||
o->option == TELOPT_OLD_ENVIRON)) {
/*
* We may only have one kind of ENVIRON going at a time.
* This is a hack, but who cares.
*/
deactivate_option(telnet, o->option ==
TELOPT_NEW_ENVIRON ? &o_oenv : &o_nenv);
}
option_side_effects(telnet, o, 1);
}
static void refused_option(Telnet telnet, const struct Opt *o)
{
if (o->send == WILL && o->option == TELOPT_NEW_ENVIRON &&
telnet->opt_states[o_oenv.index] == INACTIVE) {
send_opt(telnet, WILL, TELOPT_OLD_ENVIRON);
telnet->opt_states[o_oenv.index] = REQUESTED;
}
option_side_effects(telnet, o, 0);
}
static void proc_rec_opt(Telnet telnet, int cmd, int option)
{
const struct Opt *const *o;
log_option(telnet, "server", cmd, option);
for (o = opts; *o; o++) {
if ((*o)->option == option && (*o)->ack == cmd) {
switch (telnet->opt_states[(*o)->index]) {
case REQUESTED:
telnet->opt_states[(*o)->index] = ACTIVE;
activate_option(telnet, *o);
break;
case ACTIVE:
break;
case INACTIVE:
telnet->opt_states[(*o)->index] = ACTIVE;
send_opt(telnet, (*o)->send, option);
activate_option(telnet, *o);
break;
case REALLY_INACTIVE:
send_opt(telnet, (*o)->nsend, option);
break;
}
return;
} else if ((*o)->option == option && (*o)->nak == cmd) {
switch (telnet->opt_states[(*o)->index]) {
case REQUESTED:
telnet->opt_states[(*o)->index] = INACTIVE;
refused_option(telnet, *o);
break;
case ACTIVE:
telnet->opt_states[(*o)->index] = INACTIVE;
send_opt(telnet, (*o)->nsend, option);
option_side_effects(telnet, *o, 0);
break;
case INACTIVE:
case REALLY_INACTIVE:
break;
}
return;
}
}
/*
* If we reach here, the option was one we weren't prepared to
* cope with. If the request was positive (WILL or DO), we send
* a negative ack to indicate refusal. If the request was
* negative (WONT / DONT), we must do nothing.
*/
if (cmd == WILL || cmd == DO)
send_opt(telnet, (cmd == WILL ? DONT : WONT), option);
}
static void process_subneg(Telnet telnet)
{
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
unsigned char *b, *p, *q;
int var, value, n, bsize;
char *e, *eval, *ekey, *user;
switch (telnet->sb_opt) {
case TELOPT_TSPEED:
if (telnet->sb_len == 1 && telnet->sb_buf[0] == TELQUAL_SEND) {
char *logbuf;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *termspeed = conf_get_str(telnet->conf, CONF_termspeed);
b = snewn(20 + strlen(termspeed), unsigned char);
b[0] = IAC;
b[1] = SB;
b[2] = TELOPT_TSPEED;
b[3] = TELQUAL_IS;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
strcpy((char *)(b + 4), termspeed);
n = 4 + strlen(termspeed);
b[n] = IAC;
b[n + 1] = SE;
telnet->bufsize = sk_write(telnet->s, (char *)b, n + 2);
logevent(telnet->frontend, "server:\tSB TSPEED SEND");
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
logbuf = dupprintf("client:\tSB TSPEED IS %s", termspeed);
logevent(telnet->frontend, logbuf);
sfree(logbuf);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
sfree(b);
} else
logevent(telnet->frontend, "server:\tSB TSPEED <something weird>");
break;
case TELOPT_TTYPE:
if (telnet->sb_len == 1 && telnet->sb_buf[0] == TELQUAL_SEND) {
char *logbuf;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *termtype = conf_get_str(telnet->conf, CONF_termtype);
b = snewn(20 + strlen(termtype), unsigned char);
b[0] = IAC;
b[1] = SB;
b[2] = TELOPT_TTYPE;
b[3] = TELQUAL_IS;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
for (n = 0; termtype[n]; n++)
b[n + 4] = (termtype[n] >= 'a' && termtype[n] <= 'z' ?
termtype[n] + 'A' - 'a' :
termtype[n]);
b[n + 4] = IAC;
b[n + 5] = SE;
telnet->bufsize = sk_write(telnet->s, (char *)b, n + 6);
b[n + 4] = 0;
logevent(telnet->frontend, "server:\tSB TTYPE SEND");
logbuf = dupprintf("client:\tSB TTYPE IS %s", b + 4);
logevent(telnet->frontend, logbuf);
sfree(logbuf);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
sfree(b);
} else
logevent(telnet->frontend, "server:\tSB TTYPE <something weird>\r\n");
break;
case TELOPT_OLD_ENVIRON:
case TELOPT_NEW_ENVIRON:
p = telnet->sb_buf;
q = p + telnet->sb_len;
if (p < q && *p == TELQUAL_SEND) {
char *logbuf;
p++;
logbuf = dupprintf("server:\tSB %s SEND", telopt(telnet->sb_opt));
logevent(telnet->frontend, logbuf);
sfree(logbuf);
if (telnet->sb_opt == TELOPT_OLD_ENVIRON) {
if (conf_get_int(telnet->conf, CONF_rfc_environ)) {
value = RFC_VALUE;
var = RFC_VAR;
} else {
value = BSD_VALUE;
var = BSD_VAR;
}
/*
* Try to guess the sense of VAR and VALUE.
*/
while (p < q) {
if (*p == RFC_VAR) {
value = RFC_VALUE;
var = RFC_VAR;
} else if (*p == BSD_VAR) {
value = BSD_VALUE;
var = BSD_VAR;
}
p++;
}
} else {
/*
* With NEW_ENVIRON, the sense of VAR and VALUE
* isn't in doubt.
*/
value = RFC_VALUE;
var = RFC_VAR;
}
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
bsize = 20;
for (eval = conf_get_str_strs(telnet->conf, CONF_environmt,
NULL, &ekey);
eval != NULL;
eval = conf_get_str_strs(telnet->conf, CONF_environmt,
ekey, &ekey))
bsize += strlen(ekey) + strlen(eval) + 2;
user = get_remote_username(telnet->conf);
if (user)
bsize += 6 + strlen(user);
b = snewn(bsize, unsigned char);
b[0] = IAC;
b[1] = SB;
b[2] = telnet->sb_opt;
b[3] = TELQUAL_IS;
n = 4;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
for (eval = conf_get_str_strs(telnet->conf, CONF_environmt,
NULL, &ekey);
eval != NULL;
eval = conf_get_str_strs(telnet->conf, CONF_environmt,
ekey, &ekey)) {
b[n++] = var;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
for (e = ekey; *e; e++)
b[n++] = *e;
b[n++] = value;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
for (e = eval; *e; e++)
b[n++] = *e;
}
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
if (user) {
b[n++] = var;
b[n++] = 'U';
b[n++] = 'S';
b[n++] = 'E';
b[n++] = 'R';
b[n++] = value;
for (e = user; *e; e++)
b[n++] = *e;
}
b[n++] = IAC;
b[n++] = SE;
telnet->bufsize = sk_write(telnet->s, (char *)b, n);
if (n == 6) {
logbuf = dupprintf("client:\tSB %s IS <nothing>",
telopt(telnet->sb_opt));
logevent(telnet->frontend, logbuf);
sfree(logbuf);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
} else {
logbuf = dupprintf("client:\tSB %s IS:",
telopt(telnet->sb_opt));
logevent(telnet->frontend, logbuf);
sfree(logbuf);
for (eval = conf_get_str_strs(telnet->conf, CONF_environmt,
NULL, &ekey);
eval != NULL;
eval = conf_get_str_strs(telnet->conf, CONF_environmt,
ekey, &ekey)) {
logbuf = dupprintf("\t%s=%s", ekey, eval);
logevent(telnet->frontend, logbuf);
sfree(logbuf);
}
if (user) {
logbuf = dupprintf("\tUSER=%s", user);
logevent(telnet->frontend, logbuf);
sfree(logbuf);
}
}
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
sfree(b);
sfree(user);
}
break;
}
}
static void do_telnet_read(Telnet telnet, char *buf, int len)
{
char *outbuf = NULL;
int outbuflen = 0, outbufsize = 0;
#define ADDTOBUF(c) do { \
if (outbuflen >= outbufsize) { \
outbufsize = outbuflen + 256; \
outbuf = sresize(outbuf, outbufsize, char); \
} \
outbuf[outbuflen++] = (c); \
} while (0)
while (len--) {
int c = (unsigned char) *buf++;
switch (telnet->state) {
case TOP_LEVEL:
case SEENCR:
if (c == NUL && telnet->state == SEENCR)
telnet->state = TOP_LEVEL;
else if (c == IAC)
telnet->state = SEENIAC;
else {
if (!telnet->in_synch)
ADDTOBUF(c);
#if 1
/* I can't get the F***ing winsock to insert the urgent IAC
* into the right position! Even with SO_OOBINLINE it gives
* it to recv too soon. And of course the DM byte (that
* arrives in the same packet!) appears several K later!!
*
* Oh well, we do get the DM in the right place so I'll
* just stop hiding on the next 0xf2 and hope for the best.
*/
else if (c == DM)
telnet->in_synch = 0;
#endif
if (c == CR && telnet->opt_states[o_they_bin.index] != ACTIVE)
telnet->state = SEENCR;
else
telnet->state = TOP_LEVEL;
}
break;
case SEENIAC:
if (c == DO)
telnet->state = SEENDO;
else if (c == DONT)
telnet->state = SEENDONT;
else if (c == WILL)
telnet->state = SEENWILL;
else if (c == WONT)
telnet->state = SEENWONT;
else if (c == SB)
telnet->state = SEENSB;
else if (c == DM) {
telnet->in_synch = 0;
telnet->state = TOP_LEVEL;
} else {
/* ignore everything else; print it if it's IAC */
if (c == IAC) {
ADDTOBUF(c);
}
telnet->state = TOP_LEVEL;
}
break;
case SEENWILL:
proc_rec_opt(telnet, WILL, c);
telnet->state = TOP_LEVEL;
break;
case SEENWONT:
proc_rec_opt(telnet, WONT, c);
telnet->state = TOP_LEVEL;
break;
case SEENDO:
proc_rec_opt(telnet, DO, c);
telnet->state = TOP_LEVEL;
break;
case SEENDONT:
proc_rec_opt(telnet, DONT, c);
telnet->state = TOP_LEVEL;
break;
case SEENSB:
telnet->sb_opt = c;
telnet->sb_len = 0;
telnet->state = SUBNEGOT;
break;
case SUBNEGOT:
if (c == IAC)
telnet->state = SUBNEG_IAC;
else {
subneg_addchar:
if (telnet->sb_len >= telnet->sb_size) {
telnet->sb_size += SB_DELTA;
telnet->sb_buf = sresize(telnet->sb_buf, telnet->sb_size,
unsigned char);
}
telnet->sb_buf[telnet->sb_len++] = c;
telnet->state = SUBNEGOT; /* in case we came here by goto */
}
break;
case SUBNEG_IAC:
if (c != SE)
goto subneg_addchar; /* yes, it's a hack, I know, but... */
else {
process_subneg(telnet);
telnet->state = TOP_LEVEL;
}
break;
}
}
if (outbuflen)
c_write(telnet, outbuf, outbuflen);
sfree(outbuf);
}
static void telnet_log(Plug plug, int type, SockAddr addr, int port,
const char *error_msg, int error_code)
{
Telnet telnet = (Telnet) plug;
backend_socket_log(telnet->frontend, type, addr, port,
error_msg, error_code, telnet->conf,
telnet->session_started);
}
static void telnet_closing(Plug plug, const char *error_msg, int error_code,
int calling_back)
{
Telnet telnet = (Telnet) plug;
/*
* We don't implement independent EOF in each direction for Telnet
* connections; as soon as we get word that the remote side has
* sent us EOF, we wind up the whole connection.
*/
if (telnet->s) {
sk_close(telnet->s);
telnet->s = NULL;
if (error_msg)
telnet->closed_on_socket_error = TRUE;
notify_remote_exit(telnet->frontend);
}
if (error_msg) {
logevent(telnet->frontend, error_msg);
connection_fatal(telnet->frontend, "%s", error_msg);
}
/* Otherwise, the remote side closed the connection normally. */
}
static void telnet_receive(Plug plug, int urgent, char *data, int len)
{
Telnet telnet = (Telnet) plug;
if (urgent)
telnet->in_synch = TRUE;
telnet->session_started = TRUE;
do_telnet_read(telnet, data, len);
}
static void telnet_sent(Plug plug, int bufsize)
{
Telnet telnet = (Telnet) plug;
telnet->bufsize = bufsize;
}
/*
* Called to set up the Telnet connection.
*
* Returns an error message, or NULL on success.
*
* Also places the canonical host name into `realhost'. It must be
* freed by the caller.
*/
static const char *telnet_init(void *frontend_handle, void **backend_handle,
Conf *conf, const char *host, int port,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char **realhost, int nodelay, int keepalive)
{
static const struct plug_function_table fn_table = {
telnet_log,
telnet_closing,
telnet_receive,
telnet_sent
};
SockAddr addr;
const char *err;
Telnet telnet;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
char *loghost;
int addressfamily;
telnet = snew(struct telnet_tag);
telnet->fn = &fn_table;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
telnet->conf = conf_copy(conf);
telnet->s = NULL;
telnet->closed_on_socket_error = FALSE;
telnet->echoing = TRUE;
telnet->editing = TRUE;
telnet->activated = FALSE;
telnet->sb_buf = NULL;
telnet->sb_size = 0;
telnet->frontend = frontend_handle;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
telnet->term_width = conf_get_int(telnet->conf, CONF_width);
telnet->term_height = conf_get_int(telnet->conf, CONF_height);
telnet->state = TOP_LEVEL;
telnet->ldisc = NULL;
telnet->pinger = NULL;
telnet->session_started = TRUE;
*backend_handle = telnet;
/*
* Try to find host.
*/
addressfamily = conf_get_int(telnet->conf, CONF_addressfamily);
addr = name_lookup(host, port, realhost, telnet->conf, addressfamily,
telnet->frontend, "Telnet connection");
if ((err = sk_addr_error(addr)) != NULL) {
sk_addr_free(addr);
return err;
}
if (port < 0)
port = 23; /* default telnet port */
/*
* Open socket.
*/
telnet->s = new_connection(addr, *realhost, port, 0, 1,
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
nodelay, keepalive, (Plug) telnet, telnet->conf);
if ((err = sk_socket_error(telnet->s)) != NULL)
return err;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
telnet->pinger = pinger_new(telnet->conf, &telnet_backend, telnet);
/*
* Initialise option states.
*/
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
if (conf_get_int(telnet->conf, CONF_passive_telnet)) {
const struct Opt *const *o;
for (o = opts; *o; o++)
telnet->opt_states[(*o)->index] = INACTIVE;
} else {
const struct Opt *const *o;
for (o = opts; *o; o++) {
telnet->opt_states[(*o)->index] = (*o)->initial_state;
if (telnet->opt_states[(*o)->index] == REQUESTED)
send_opt(telnet, (*o)->send, (*o)->option);
}
telnet->activated = TRUE;
}
/*
* Set up SYNCH state.
*/
telnet->in_synch = FALSE;
/*
* We can send special commands from the start.
*/
update_specials_menu(telnet->frontend);
/*
* loghost overrides realhost, if specified.
*/
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
loghost = conf_get_str(telnet->conf, CONF_loghost);
if (*loghost) {
char *colon;
sfree(*realhost);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
*realhost = dupstr(loghost);
colon = host_strrchr(*realhost, ':');
if (colon)
*colon++ = '\0';
}
return NULL;
}
static void telnet_free(void *handle)
{
Telnet telnet = (Telnet) handle;
sfree(telnet->sb_buf);
if (telnet->s)
sk_close(telnet->s);
if (telnet->pinger)
pinger_free(telnet->pinger);
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
conf_free(telnet->conf);
sfree(telnet);
}
/*
* Reconfigure the Telnet backend. There's no immediate action
* necessary, in this backend: we just save the fresh config for
* any subsequent negotiations.
*/
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
static void telnet_reconfig(void *handle, Conf *conf)
{
Telnet telnet = (Telnet) handle;
Post-release destabilisation! Completely remove the struct type 'Config' in putty.h, which stores all PuTTY's settings and includes an arbitrary length limit on every single one of those settings which is stored in string form. In place of it is 'Conf', an opaque data type everywhere outside the new file conf.c, which stores a list of (key, value) pairs in which every key contains an integer identifying a configuration setting, and for some of those integers the key also contains extra parts (so that, for instance, CONF_environmt is a string-to-string mapping). Everywhere that a Config was previously used, a Conf is now; everywhere there was a Config structure copy, conf_copy() is called; every lookup, adjustment, load and save operation on a Config has been rewritten; and there's a mechanism for serialising a Conf into a binary blob and back for use with Duplicate Session. User-visible effects of this change _should_ be minimal, though I don't doubt I've introduced one or two bugs here and there which will eventually be found. The _intended_ visible effects of this change are that all arbitrary limits on configuration strings and lists (e.g. limit on number of port forwardings) should now disappear; that list boxes in the configuration will now be displayed in a sorted order rather than the arbitrary order in which they were added to the list (since the underlying data structure is now a sorted tree234 rather than an ad-hoc comma-separated string); and one more specific change, which is that local and dynamic port forwardings on the same port number are now mutually exclusive in the configuration (putting 'D' in the key rather than the value was a mistake in the first place). One other reorganisation as a result of this is that I've moved all the dialog.c standard handlers (dlg_stdeditbox_handler and friends) out into config.c, because I can't really justify calling them generic any more. When they took a pointer to an arbitrary structure type and the offset of a field within that structure, they were independent of whether that structure was a Config or something completely different, but now they really do expect to talk to a Conf, which can _only_ be used for PuTTY configuration, so I've renamed them all things like conf_editbox_handler and moved them out of the nominally independent dialog-box management module into the PuTTY-specific config.c. [originally from svn r9214]
2011-07-14 22:52:21 +04:00
pinger_reconfig(telnet->pinger, telnet->conf, conf);
conf_free(telnet->conf);
telnet->conf = conf_copy(conf);
}
/*
* Called to send data down the Telnet connection.
*/
static int telnet_send(void *handle, const char *buf, int len)
{
Telnet telnet = (Telnet) handle;
unsigned char *p, *end;
static const unsigned char iac[2] = { IAC, IAC };
static const unsigned char cr[2] = { CR, NUL };
#if 0
static const unsigned char nl[2] = { CR, LF };
#endif
if (telnet->s == NULL)
return 0;
p = (unsigned char *)buf;
end = (unsigned char *)(buf + len);
while (p < end) {
unsigned char *q = p;
while (p < end && iswritable(*p))
p++;
telnet->bufsize = sk_write(telnet->s, (char *)q, p - q);
while (p < end && !iswritable(*p)) {
telnet->bufsize =
sk_write(telnet->s, (char *)(*p == IAC ? iac : cr), 2);
p++;
}
}
return telnet->bufsize;
}
/*
* Called to query the current socket sendability status.
*/
static int telnet_sendbuffer(void *handle)
{
Telnet telnet = (Telnet) handle;
return telnet->bufsize;
}
/*
* Called to set the size of the window from Telnet's POV.
*/
static void telnet_size(void *handle, int width, int height)
{
Telnet telnet = (Telnet) handle;
unsigned char b[24];
int n;
char *logbuf;
telnet->term_width = width;
telnet->term_height = height;
if (telnet->s == NULL || telnet->opt_states[o_naws.index] != ACTIVE)
return;
n = 0;
b[n++] = IAC;
b[n++] = SB;
b[n++] = TELOPT_NAWS;
b[n++] = telnet->term_width >> 8;
if (b[n-1] == IAC) b[n++] = IAC; /* duplicate any IAC byte occurs */
b[n++] = telnet->term_width & 0xFF;
if (b[n-1] == IAC) b[n++] = IAC; /* duplicate any IAC byte occurs */
b[n++] = telnet->term_height >> 8;
if (b[n-1] == IAC) b[n++] = IAC; /* duplicate any IAC byte occurs */
b[n++] = telnet->term_height & 0xFF;
if (b[n-1] == IAC) b[n++] = IAC; /* duplicate any IAC byte occurs */
b[n++] = IAC;
b[n++] = SE;
telnet->bufsize = sk_write(telnet->s, (char *)b, n);
logbuf = dupprintf("client:\tSB NAWS %d,%d",
telnet->term_width, telnet->term_height);
logevent(telnet->frontend, logbuf);
sfree(logbuf);
}
/*
* Send Telnet special codes.
*/
static void telnet_special(void *handle, Telnet_Special code)
{
Telnet telnet = (Telnet) handle;
unsigned char b[2];
if (telnet->s == NULL)
return;
b[0] = IAC;
switch (code) {
case TS_AYT:
b[1] = AYT;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
break;
case TS_BRK:
b[1] = BREAK;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
break;
case TS_EC:
b[1] = EC;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
break;
case TS_EL:
b[1] = EL;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
break;
case TS_GA:
b[1] = GA;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
break;
case TS_NOP:
b[1] = NOP;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
break;
case TS_ABORT:
b[1] = ABORT;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
break;
case TS_AO:
b[1] = AO;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
break;
case TS_IP:
b[1] = IP;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
break;
case TS_SUSP:
b[1] = SUSP;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
break;
case TS_EOR:
b[1] = EOR;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
break;
case TS_EOF:
b[1] = xEOF;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
break;
case TS_EOL:
/* In BINARY mode, CR-LF becomes just CR -
* and without the NUL suffix too. */
if (telnet->opt_states[o_we_bin.index] == ACTIVE)
telnet->bufsize = sk_write(telnet->s, "\r", 1);
else
telnet->bufsize = sk_write(telnet->s, "\r\n", 2);
break;
case TS_SYNCH:
b[1] = DM;
telnet->bufsize = sk_write(telnet->s, (char *)b, 1);
telnet->bufsize = sk_write_oob(telnet->s, (char *)(b + 1), 1);
break;
case TS_RECHO:
if (telnet->opt_states[o_echo.index] == INACTIVE ||
telnet->opt_states[o_echo.index] == REALLY_INACTIVE) {
telnet->opt_states[o_echo.index] = REQUESTED;
send_opt(telnet, o_echo.send, o_echo.option);
}
break;
case TS_LECHO:
if (telnet->opt_states[o_echo.index] == ACTIVE) {
telnet->opt_states[o_echo.index] = REQUESTED;
send_opt(telnet, o_echo.nsend, o_echo.option);
}
break;
case TS_PING:
if (telnet->opt_states[o_they_sga.index] == ACTIVE) {
b[1] = NOP;
telnet->bufsize = sk_write(telnet->s, (char *)b, 2);
}
break;
default:
break; /* never heard of it */
}
}
static const struct telnet_special *telnet_get_specials(void *handle)
{
static const struct telnet_special specials[] = {
{"Are You There", TS_AYT},
{"Break", TS_BRK},
{"Synch", TS_SYNCH},
{"Erase Character", TS_EC},
{"Erase Line", TS_EL},
{"Go Ahead", TS_GA},
{"No Operation", TS_NOP},
{NULL, TS_SEP},
{"Abort Process", TS_ABORT},
{"Abort Output", TS_AO},
{"Interrupt Process", TS_IP},
{"Suspend Process", TS_SUSP},
{NULL, TS_SEP},
{"End Of Record", TS_EOR},
{"End Of File", TS_EOF},
{NULL, TS_EXITMENU}
};
return specials;
}
static int telnet_connected(void *handle)
{
Telnet telnet = (Telnet) handle;
return telnet->s != NULL;
}
static int telnet_sendok(void *handle)
{
/* Telnet telnet = (Telnet) handle; */
return 1;
}
static void telnet_unthrottle(void *handle, int backlog)
{
Telnet telnet = (Telnet) handle;
sk_set_frozen(telnet->s, backlog > TELNET_MAX_BACKLOG);
}
static int telnet_ldisc(void *handle, int option)
{
Telnet telnet = (Telnet) handle;
if (option == LD_ECHO)
return telnet->echoing;
if (option == LD_EDIT)
return telnet->editing;
return FALSE;
}
static void telnet_provide_ldisc(void *handle, void *ldisc)
{
Telnet telnet = (Telnet) handle;
telnet->ldisc = ldisc;
}
static void telnet_provide_logctx(void *handle, void *logctx)
{
/* This is a stub. */
}
static int telnet_exitcode(void *handle)
{
Telnet telnet = (Telnet) handle;
if (telnet->s != NULL)
return -1; /* still connected */
else if (telnet->closed_on_socket_error)
return INT_MAX; /* a socket error counts as an unclean exit */
else
/* Telnet doesn't transmit exit codes back to the client */
return 0;
}
/*
* cfg_info for Telnet does nothing at all.
*/
static int telnet_cfg_info(void *handle)
{
return 0;
}
Backend telnet_backend = {
telnet_init,
telnet_free,
telnet_reconfig,
telnet_send,
telnet_sendbuffer,
telnet_size,
telnet_special,
telnet_get_specials,
telnet_connected,
telnet_exitcode,
telnet_sendok,
telnet_ldisc,
telnet_provide_ldisc,
telnet_provide_logctx,
telnet_unthrottle,
telnet_cfg_info,
NULL /* test_for_upstream */,
"telnet",
PROT_TELNET,
23
};