Make it a bit easier to find our explanation of `raw' mode.

[originally from svn r4547]

doc/config.but

@@ -1,4 +1,4 @@
-\versionid $Id: config.but,v 1.88 2004/09/01 10:19:22 jacob Exp $
+\versionid $Id: config.but,v 1.89 2004/09/17 14:26:39 jacob Exp $
 
 \C{config} Configuring PuTTY
 
@@ -28,14 +28,14 @@ address, of the server you want to connect to.
 \b The \q{Protocol} radio buttons let you choose what type of
 connection you want to make: a raw connection, a Telnet connection, an
 rlogin connection or an SSH connection. (See \k{which-one} for a
-summary of the differences between SSH, Telnet and rlogin.)
+summary of the differences between SSH, Telnet and rlogin, and
+\k{using-rawprot} for an explanation of \q{raw} connections.)
 
 \b The \q{Port} box lets you specify which port number on the server
 to connect to. If you select Telnet, Rlogin, or SSH, this box will
 be filled in automatically to the usual value, and you will only
 need to change it if you have an unusual server. If you select Raw
-mode (see \k{using-rawprot}), you will almost certainly need to fill
-in the \q{Port} box.
+mode, you will almost certainly need to fill in the \q{Port} box.
 
 \S{config-saving} Loading and storing saved sessions
 

doc/gs.but

@@ -1,4 +1,4 @@
-\versionid $Id: gs.but,v 1.7 2004/04/08 12:38:53 simon Exp $
+\versionid $Id: gs.but,v 1.8 2004/09/17 14:26:39 jacob Exp $
 
 \C{gs} Getting started with PuTTY
 
@@ -25,7 +25,7 @@ buttons. For a login session, you should select \i{Telnet},
 differences between the three protocols, and advice on which one to
 use. The fourth protocol, \I{raw protocol}\e{Raw}, is not used for
 interactive login sessions; you would usually use this for debugging
-other Internet services.
+other Internet services (see \k{using-rawprot}).
 
 When you change the selected protocol, the number in the \q{Port}
 box will change. This is normal: it happens because the various