of polishing to bring them to what I think should in principle be
release quality. Unlike the unfix.org patches themselves, this
checkin enables IPv6 by default; if you want to leave it out, you
have to build with COMPAT=-DNO_IPV6.
I have tested that this compiles on Visual C 7 (so the nightlies
_should_ acquire IPv6 support without missing a beat), but since I
don't have IPv6 set up myself I haven't actually tested that it
_works_. It still seems to make correct IPv4 connections, but that's
all I've been able to verify for myself. Further testing is needed.
[originally from svn r5047]
[this svn revision also touched putty-wishlist]
mid-session if we are not using SSHv1. I've done this by introducing
a generic `cfg_info' function which every back end can use to
communicate an int's worth of data to setup_config_box; in SSH
that's the protocol version in use, and in everything else it's
currently zero.
[originally from svn r5040]
[r5031 == d77102a8d5]
which pretty much any module can call to request a call-back in the
future. So terminal.c can do its own handling of blinking, visual
bells and deferred screen updates, without having to rely on
term_update() being called 50 times a second (fixes: pterm-timer);
and ssh.c and telnet.c both invoke a new module pinger.c which takes
care of sending keepalives, so they get sent uniformly in all front
ends (fixes: plink-keepalives, unix-keepalives).
[originally from svn r4906]
[this svn revision also touched putty-wishlist]
of the SSH servers I conveniently have access to (Debian stable OpenSSH --
3.4p1 -- and lshd) seem to take a blind bit of notice, but the channel
requests look fine to me in the packet log.
I've included all the signals explicitly defined by
draft-ietf-secsh-connect-19, but I've put the more obscure ones in a submenu
of the specials menu; there's therefore been some minor upheaval to support
such submenus.
[originally from svn r4652]
the same window (Windows version only).
Policy change: it's now the backend's responsibility to call
update_specials_menu() at the start of a session (or whenever it feels ready),
if it has any special commands. Otherwise the menu won't be displayed.
[originally from svn r4649]
No very good reason, but I've occasionally wanted to frob it to see if it
makes any difference to problems I'm having, and it was easy.
Tested that it does actually cause keepalives on Windows (with tcpdump);
should also work on Unix. Not implemented on Mac (does nothing), but then
neither is TCP_NODELAY.
Quite a big checkin, much of which is adding `keepalive' alongside `nodelay'
in network function calls.
[originally from svn r4309]
sk_new() on invocation; these functions become responsible for (eventually)
freeing it. The caller must not do anything with 'addr' after it's been passed
in. (Ick.)
Why:
A SOCKS5 crash appears to have been caused by overzealous freeing of
a SockAddr (ssh.c:1.257 [r2492]), which for proxied connections is
squirreled away long-term (and this can't easily be avoided).
It would have been nice to make a copy of the SockAddr, in case the caller has
a use for it, but one of the implementations (uxnet.c) hides a "struct
addrinfo" in there, and we have no defined way to duplicate those. (None of the
current callers _do_ have a further use for the SockAddr.)
As far as I can tell, everything _except_ proxying only needs addr for the
duration of the call, so sk_addr_free()s immediately. If I'm mistaken, it
should at least be easier to find the offending free()...
[originally from svn r3383]
[r2492 == bdd6633970]
`Special Command' menu, in which any backend can place its own list
of magical things the user might want to ask the backend to do. In
particular I've implemented the recently proposed "break" extension
in SSH2 using this mechanism.
NB this checkin slightly breaks the Mac build, since it needs to
provide at least a stub form of update_specials_menu().
[originally from svn r3054]
malloc functions, which automatically cast to the same type they're
allocating the size of. Should prevent any future errors involving
mallocing the size of the wrong structure type, and will also make
life easier if we ever need to turn the PuTTY core code from real C
into C++-friendly C. I haven't touched the Mac frontend in this
checkin because I couldn't compile or test it.
[originally from svn r3014]
areas of the code. Not all back-ends have been tested, but Telnet and SSH
behave reasonably.
Incidentally, almost all of this patch was written through Mac PuTTY,
admittedly over a Telnet connection.
[originally from svn r2615]
holdout static I hadn't noticed; unicode.c had one too; and a large
number of statics that were perfectly OK due to being constants have
been made `const', with assorted `const' repercussions all over the
place. I now declare `remove-statics' to be fixed.
[originally from svn r2594]
proxy-indirection network functions (name_lookup, new_connection,
new_listener) takes a `const Config *' as an argument, and extracts
enough information from it before returning to handle that
particular network operation in accordance with the proxy settings
it specifies. This involved {win,ux}net.c due to a `const'
repercussion.
[originally from svn r2567]
and have a function to pass in a new one. (Well, actually several
back ends don't actually bother to do this because they need nothing
out of Config after the initial setup phase, but they could if they
wanted to.)
[originally from svn r2561]
any buffers used internally by telnet.c as unsigned char, and cast to/from
char * when interacting with the rest of PuTTY. Not actually tested, since
I'm some way from actually being able to link this yet.
Also clean up a couple of style warnings from Apple's compilers.
[originally from svn r2447]
SockAddr, which just contains an unresolved hostname and is created
by a stub function in *net.c. It's an error to pass this to most of
the real-meat functions in *net.c; these fake addresses should have
been dealt with by the time they get down that far. proxy.c now
contains name_lookup(), a wrapper on sk_namelookup() which decides
whether or not to do real DNS, and the individual proxy
implementations each deal sensibly with being handed an unresolved
address and avoid ever passing one down to *net.c.
[originally from svn r2353]
since the Dawn O' Time, and consisted of me putting the two halves
of a short-circuiting bounds check the wrong way round: instead of
`p_in_range && *p', I had `*p && p_in_range'. Oops. valgrind rocks.
[originally from svn r2174]
source files in which it's no longer required (it was previously
required in anything that included <putty.h>, but not any more).
Also moved a couple of stray bits of exposed WinSock back into
winnet.c (getservbyname from ssh.c and AF_INET from proxy.c).
[originally from svn r2160]
absent, and also (I think) all the frontend request functions (such
as request_resize) take a context pointer, so that multiple windows
can be handled sensibly. I wouldn't swear to this, but I _think_
that only leaves the Unicode stuff as the last stubborn holdout.
[originally from svn r2147]
each backend now stores all its internal variables in a big struct,
and each backend function gets a pointer to this struct passed to
it. This still isn't the end of the work - lots of subsidiary things
still use globals, notably all the cipher and compressor modules and
the X11 forwarding authentication stuff. But ssh.c itself has now
been transformed, and that was the really painful bit, so from here
on it all ought to be a sequence of much smaller and simpler pieces
of work.
[originally from svn r2127]
terminal.c was apparently relying on implicit initialisation to
zero, and also I've removed the backends' dependency on terminal.h
by having terminal sizes explicitly passed in to back->size().
[originally from svn r2117]
all the global and function-static variables out of terminal.c into
a dynamically allocated data structure. Note that this does not yet
confer the ability to run more than one of them in the same process,
because other things (the line discipline, the back end) are still
global, and also in particular the address of the dynamically
allocated terminal-data structure is held in a global variable
`term'. But what I've got here represents a reasonable stopping
point at which to check things in. In _theory_ this should all still
work happily, on both Unix and Windows. In practice, who knows?
[originally from svn r2115]
CONNECT, but contains an extensible framework to allow other
proxies. Apparently SOCKS and ad-hoc-telnet-proxy are already
planned (the GUI mentions them already even though they don't work
yet). GUI includes full configurability and allows definition of
exclusion zones. Rock and roll.
[originally from svn r1598]
process. This is functional in SSH, and vestigial (just returns 0)
in the other three protocols. Plink's Windows exit code is now
determined by the remote process exit code, which should make it
more usable in scripting applications. Tested in both SSH1 and SSH2.
[originally from svn r1518]
by ceasing to listen on input channels if the corresponding output
channel isn't accepting data. Has had basic check-I-didn't-actually-
break-anything-too-badly testing, but hasn't been genuinely tested
in stress conditions (because concocting stress conditions is non-
trivial).
[originally from svn r1198]
send Telnet special sequences (Interrupt Process, Suspend, Erase
Char, End Of Line) instead of their ASCII equivalents. In particular
Return -> Telnet End Of Line is _always_ enabled irrespective of the
configuration, while the others are optional. Also in this patch, an
entertainingly ghastly use of `switch' to allow literal ^M^J to do
the same thing as magic-^M (the Return key) when in Raw protocol.
[originally from svn r1109]
version allows you to specify, per socket, which sockets receive OOB
data in-line (so that you know what was before the mark and what was
after) and which receive it out of line (so it's really a one-byte
out-of-band facility rather than discard-to-mark). This reflects the
fact that rlogin appears to make more sense in the latter mode, and
telnet in the former. This patch makes rlogin work right for me.
[originally from svn r921]