The number of people has been steadily increasing who read our source
code with an editor that thinks tab stops are 4 spaces apart, as
opposed to the traditional tty-derived 8 that the PuTTY code expects.
So I've been wondering for ages about just fixing it, and switching to
a spaces-only policy throughout the code. And I recently found out
about 'git blame -w', which should make this change not too disruptive
for the purposes of source-control archaeology; so perhaps now is the
time.
While I'm at it, I've also taken the opportunity to remove all the
trailing spaces from source lines (on the basis that git dislikes
them, and is the only thing that seems to have a strong opinion one
way or the other).
Apologies to anyone downstream of this code who has complicated patch
sets to rebase past this change. I don't intend it to be needed again.
I've always thought poll was more hassle to set up, because if you
want to reuse part of your pollfds list between calls then you have to
index every fd by its position in the list as well as the fd number
itself, which gives you twice as many indices to keep track of than if
the fd is always its own key.
But the problem is that select is fundamentally limited to the range
of fds that can fit in an fd_set, which is not the range of fds that
can _exist_, so I've had a change of heart and now have to go with
poll.
For the moment, I've surrounded it with a 'pollwrapper' structure that
lets me treat it more or less like select, containing a tree234 that
maps each fd to its location in the list, and also translating between
the simple select r/w/x classification and the richer poll flags.
That's let me do the migration with minimal disruption to the call
sites.
In future perhaps I can start using poll more directly, and/or using
the richer flag system (though the latter might be fiddly because of
sometimes being constrained to use the glib event loop). But this will
do for now.
The idea of these is that they centralise the common idiom along the
lines of
if (logical_array_len >= physical_array_size) {
physical_array_size = logical_array_len * 5 / 4 + 256;
array = sresize(array, physical_array_size, ElementType);
}
which happens at a zillion call sites throughout this code base, with
different random choices of the geometric factor and additive
constant, sometimes forgetting them completely, and generally doing a
lot of repeated work.
The new macro sgrowarray(array,size,n) has the semantics: here are the
array pointer and its physical size for you to modify, now please
ensure that the nth element exists, so I can write into it. And
sgrowarrayn(array,size,n,m) is the same except that it ensures that
the array has size at least n+m (so sgrowarray is just the special
case where m=1).
Now that this is a single centralised implementation that will be used
everywhere, I've also gone to more effort in the implementation, with
careful overflow checks that would have been painful to put at all the
previous call sites.
This commit also switches over every use of sresize(), apart from a
few where I really didn't think it would gain anything. A consequence
of that is that a lot of array-size variables have to have their types
changed to size_t, because the macros require that (they address-take
the size to pass to the underlying function).
I've fixed a handful of these where I found them in passing, but when
I went systematically looking, there were a lot more that I hadn't
found!
A particular highlight of this collection is the code that formats
Windows clipboard data in RTF, which was absolutely crying out for
strbuf_catf, and now it's got it.
Plink's hostname argument can refer to a saved session instead of a
hostname. We test this by trying to load it as a session, and seeing
if the resulting Conf is launchable. But if Default Settings itself is
launchable (e.g. if it has the protocol set to Serial) then that can
happen even if there is no saved session with that name - in which
case we'll _never_ fall back to treating the argument as a host name.
Fixed by also checking the new success flag returned from do_defaults.
My normal habit these days, in new code, is to treat int and bool as
_almost_ completely separate types. I'm still willing to use C's
implicit test for zero on an integer (e.g. 'if (!blob.len)' is fine,
no need to spell it out as blob.len != 0), but generally, if a
variable is going to be conceptually a boolean, I like to declare it
bool and assign to it using 'true' or 'false' rather than 0 or 1.
PuTTY is an exception, because it predates the C99 bool, and I've
stuck to its existing coding style even when adding new code to it.
But it's been annoying me more and more, so now that I've decided C99
bool is an acceptable thing to require from our toolchain in the first
place, here's a quite thorough trawl through the source doing
'boolification'. Many variables and function parameters are now typed
as bool rather than int; many assignments of 0 or 1 to those variables
are now spelled 'true' or 'false'.
I managed this thorough conversion with the help of a custom clang
plugin that I wrote to trawl the AST and apply heuristics to point out
where things might want changing. So I've even managed to do a decent
job on parts of the code I haven't looked at in years!
To make the plugin's work easier, I pushed platform front ends
generally in the direction of using standard 'bool' in preference to
platform-specific boolean types like Windows BOOL or GTK's gboolean;
I've left the platform booleans in places they _have_ to be for the
platform APIs to work right, but variables only used by my own code
have been converted wherever I found them.
In a few places there are int values that look very like booleans in
_most_ of the places they're used, but have a rarely-used third value,
or a distinction between different nonzero values that most users
don't care about. In these cases, I've _removed_ uses of 'true' and
'false' for the return values, to emphasise that there's something
more subtle going on than a simple boolean answer:
- the 'multisel' field in dialog.h's list box structure, for which
the GTK front end in particular recognises a difference between 1
and 2 but nearly everything else treats as boolean
- the 'urgent' parameter to plug_receive, where 1 vs 2 tells you
something about the specific location of the urgent pointer, but
most clients only care about 0 vs 'something nonzero'
- the return value of wc_match, where -1 indicates a syntax error in
the wildcard.
- the return values from SSH-1 RSA-key loading functions, which use
-1 for 'wrong passphrase' and 0 for all other failures (so any
caller which already knows it's not loading an _encrypted private_
key can treat them as boolean)
- term->esc_query, and the 'query' parameter in toggle_mode in
terminal.c, which _usually_ hold 0 for ESC[123h or 1 for ESC[?123h,
but can also hold -1 for some other intervening character that we
don't support.
In a few places there's an integer that I haven't turned into a bool
even though it really _can_ only take values 0 or 1 (and, as above,
tried to make the call sites consistent in not calling those values
true and false), on the grounds that I thought it would make it more
confusing to imply that the 0 value was in some sense 'negative' or
bad and the 1 positive or good:
- the return value of plug_accepting uses the POSIXish convention of
0=success and nonzero=error; I think if I made it bool then I'd
also want to reverse its sense, and that's a job for a separate
piece of work.
- the 'screen' parameter to lineptr() in terminal.c, where 0 and 1
represent the default and alternate screens. There's no obvious
reason why one of those should be considered 'true' or 'positive'
or 'success' - they're just indices - so I've left it as int.
ssh_scp_recv had particularly confusing semantics for its previous int
return value: its call sites used '<= 0' to check for error, but it
never actually returned a negative number, just 0 or 1. Now the
function and its call sites agree that it's a bool.
In a couple of places I've renamed variables called 'ret', because I
don't like that name any more - it's unclear whether it means the
return value (in preparation) for the _containing_ function or the
return value received from a subroutine call, and occasionally I've
accidentally used the same variable for both and introduced a bug. So
where one of those got in my way, I've renamed it to 'toret' or 'retd'
(the latter short for 'returned') in line with my usual modern
practice, but I haven't done a thorough job of finding all of them.
Finally, one amusing side effect of doing this is that I've had to
separate quite a few chained assignments. It used to be perfectly fine
to write 'a = b = c = TRUE' when a,b,c were int and TRUE was just a
the 'true' defined by stdbool.h, that idiom provokes a warning from
gcc: 'suggest parentheses around assignment used as truth value'!
I think this is the full set of things that ought logically to be
boolean.
One annoyance is that quite a few radio-button controls in config.c
address Conf fields that are now bool rather than int, which means
that the shared handler function can't just access them all with
conf_{get,set}_int. Rather than back out the rigorous separation of
int and bool in conf.c itself, I've just added a similar alternative
handler function for the bool-typed ones.
This commit includes <stdbool.h> from defs.h and deletes my
traditional definitions of TRUE and FALSE, but other than that, it's a
100% mechanical search-and-replace transforming all uses of TRUE and
FALSE into the C99-standardised lowercase spellings.
No actual types are changed in this commit; that will come next. This
is just getting the noise out of the way, so that subsequent commits
can have a higher proportion of signal.
This is a new vtable-based abstraction which is passed to a backend in
place of Frontend, and it implements only the subset of the Frontend
functions needed by a backend. (Many other Frontend functions still
exist, notably the wide range of things called by terminal.c providing
platform-independent operations on the GUI terminal window.)
The purpose of making it a vtable is that this opens up the
possibility of creating a backend as an internal implementation detail
of some other activity, by providing just that one backend with a
custom Seat that implements the methods differently.
For example, this refactoring should make it feasible to directly
implement an SSH proxy type, aka the 'jump host' feature supported by
OpenSSH, aka 'open a secondary SSH session in MAINCHAN_DIRECT_TCP
mode, and then expose the main channel of that as the Socket for the
primary connection'. (Which of course you can already do by spawning
'plink -nc' as a separate proxy process, but this would permit it in
the _same_ process without anything getting confused.)
I've centralised a full set of stub methods in misc.c for the new
abstraction, which allows me to get rid of several annoying stubs in
the previous code. Also, while I'm here, I've moved a lot of
duplicated modalfatalbox() type functions from application main
program files into wincons.c / uxcons.c, which I think saves
duplication overall. (A minor visible effect is that the prefixes on
those console-based fatal error messages will now be more consistent
between applications.)
Nearly every part of the code that ever handles a full backend
structure has historically done it using a pair of pointer variables,
one pointing at a constant struct full of function pointers, and the
other pointing to a 'void *' state object that's passed to each of
those.
While I'm modernising the rest of the code, this seems like a good
time to turn that into the same more or less type-safe and less
cumbersome system as I'm using for other parts of the code, such as
Socket, Plug, BinaryPacketProtocol and so forth: the Backend structure
contains a vtable pointer, and a system of macro wrappers handles
dispatching through that vtable.
This is another piece of long-overdue refactoring similar to the
recent commit e3796cb77. But where that one dealt with normalisation
of stuff already stored _in_ a Conf by whatever means (including, in
particular, handling a user typing 'username@host.name' into the
Hostname box of the GUI session dialog box), this one deals with
handling argv entries and putting them into the Conf.
This isn't exactly a pure no-functional-change-at-all refactoring. On
the other hand, it isn't a full-on cleanup that completely
rationalises all the user-visible behaviour as well as the code
structure. It's somewhere in between: I've preserved all the behaviour
quirks that I could imagine a reason for having intended, but taken
the opportunity to _not_ faithfully replicate anything I thought was
clearly just a bug.
So, for example, the following inconsistency is carefully preserved:
the command 'plink -load session nextword' treats 'nextword' as a host
name if the loaded session hasn't provided a hostname already, and
otherwise treats 'nextword' as the remote command to execute on the
already-specified remote host, but the same combination of arguments
to GUI PuTTY will _always_ treat 'nextword' as a hostname, overriding
a hostname (if any) in the saved session. That makes some sense to me
because of the different shapes of the overall command lines.
On the other hand, there are two behaviour changes I know of as a
result of this commit: a third argument to GUI PuTTY (after a hostname
and port) now provokes an error message instead of being silently
ignored, and in Plink, if you combine a -P option (specifying a port
number) with the historical comma-separated protocol selection prefix
on the hostname argument (which I'd completely forgotten even existed
until this piece of work), then the -P will now override the selected
protocol's default port number, whereas previously the default port
would win. For example, 'plink -P 12345 telnet,hostname' will now
connect via Telnet to port 12345 instead of to port 23.
There may be scope for removing or rethinking some of the command-
line syntax quirks in the wake of this change. If we do decide to do
anything like that, then hopefully having it all in one place will
make it easier to remove or change things consistently across the
tools.
This change applies to every situation when GUI PuTTY knowingly spawns
another GUI PuTTY, to wit, the System menu options 'New Session',
'Duplicate Session' and the 'Saved Sessions' submenu.
(Literally speaking, what we actually pass through to the sub-PuTTY's
command line is not the "-restrict-acl" option itself, but a special
prefix "&R", which has the same meaning but which lives in the special
pre-argv-splitting command-line namespace like the magic options used
for Duplicate Session and the old '@sessionname' prefix which the
Saved Sessions submenu still uses. Otherwise, by the time we split up
argv and recognised -restrict-acl, it would be too late to parse those
other options.)
One case in which PuTTY spawns a subprocess and this change _doesn't_
apply is when the subprocess is a proxy command which happens to be a
Plink. Recognising Plink commands in that situation would be fragile
and unreliable, and in any case if the user wants a proxy Plink to be
ACL-restricted, they are in control of its exact command line so they
can add -restrict-acl themselves.
As documented in bug 'win-process-acl-finesse', we've had enough
assorted complaints about it breaking various non-malicious pieces of
Windows process interaction (ranging from git->plink integration to
screen readers for the vision-impaired) that I think it's more
sensible to set the process back to its default level of protection.
This precaution was never a fully effective protection anyway, due to
the race condition at process startup; the only properly effective
defence would have been to prevent malware running under the same user
ID as PuTTY in the first place, so in that sense, nothing has changed.
But people who want the arguable defence-in-depth advantage of the ACL
restriction can now turn it on with the '-restrict-acl' command-line
option, and it's up to them whether they can live with the assorted
inconveniences that come with it.
In the course of this change, I've centralised a bit more of the
restriction code into winsecur.c, to avoid repeating the error
handling in multiple places.
This is equivalent to selecting 'Local' as the proxy type and entering
the argument string in the proxy command box, in the GUI.
I've pulled this out of all the other proxy options to promote to a
named command-line option, partly because it's the proxy option with
the most natural command-line expression in the first place (any shell
command you might want to use is already in the form of a single
string), and also because it has uses beyond end-user proxying
applications: in particular, replacing the network connection with a
local process is a convenient way to do testing in the style of
contrib/samplekex.py, avoiding the need to run a separate command to
make the test 'server' listen on a port.
TOOLTYPE_NONNETWORK (i.e. pterm) already has "-log" (as does Unix
PuTTY), so there's no sense suppressing the synonym "-sessionlog".
Undocumented lacunae that remain:
plink accepts -sessionlog, but does nothing with it. Arguably it should.
puttytel accepts -sshlog/-sshrawlog (and happily logs e.g. Telnet
negotiation, as does PuTTY proper).
Log files, especially SSH packet logs, are often things you want to
generate in unusual circumstances, so it's good to have lots of ways
to ask for them. Particularly, it's especially painful to have to set
up a custom saved session to get diagnostics out of the command-line
tools.
I've added options '-sessionlog', '-sshlog' and '-sshrawlog', each of
which takes a filename argument. I think the fourth option (session
output but filtered down to the printable subset) is not really a
_debugging_ log in the same sense, so it's not as critical to have an
option for it.
Having found a lot of unfixed constness issues in recent development,
I thought perhaps it was time to get proactive, so I compiled the
whole codebase with -Wwrite-strings. That turned up a huge load of
const problems, which I've fixed in this commit: the Unix build now
goes cleanly through with -Wwrite-strings, and the Windows build is as
close as I could get it (there are some lingering issues due to
occasional Windows API functions like AcquireCredentialsHandle not
having the right constness).
Notable fallout beyond the purely mechanical changing of types:
- the stuff saved by cmdline_save_param() is now explicitly
dupstr()ed, and freed in cmdline_run_saved.
- I couldn't make both string arguments to cmdline_process_param()
const, because it intentionally writes to one of them in the case
where it's the argument to -pw (in the vain hope of being at least
slightly friendly to 'ps'), so elsewhere I had to temporarily
dupstr() something for the sake of passing it to that function
- I had to invent a silly parallel version of const_cmp() so I could
pass const string literals in to lookup functions.
- stripslashes() in pscp.c and psftp.c has the annoying strchr nature
This option is available from the command line as '-hostkey', and is
also configurable through the GUI. When enabled, it completely
replaces all of the automated host key management: the server's host
key will be checked against the manually configured list, and the
connection will be allowed or disconnected on that basis, and the host
key store in the registry will not be either consulted or updated.
The main aim is to provide a means of automatically running Plink,
PSCP or PSFTP deep inside Windows services where HKEY_CURRENT_USER
isn't available to have stored the right host key in. But it also
permits you to specify a list of multiple host keys, which means a
second use case for the same mechanism will probably be round-robin
DNS names that select one of several servers with different host keys.
Host keys can be specified as the standard MD5 fingerprint or as an
SSH-2 base64 blob, and are canonicalised on input. (The base64 blob is
more unwieldy, especially with Windows command-line length limits, but
provides a means of specifying the _whole_ public key in case you
don't trust MD5. I haven't bothered to provide an analogous mechanism
for SSH-1, on the basis that anyone worrying about MD5 should have
stopped using SSH-1 already!)
[originally from svn r10220]
I've gone through everywhere we handle host names / addresses (on
command lines, in PuTTY config, in port forwarding, in X display
names, in host key storage...) and tried to make them handle IPv6
literals sensibly, by using the host_str* functions I introduced in my
previous commit. Generally it's now OK to use a bracketed IPv6 literal
anywhere a hostname might have been valid; in a few cases where no
ambiguity exists (e.g. no :port suffix is permitted anyway)
unbracketed IPv6 literals are also acceptable.
[originally from svn r10120]
I've enabled gcc's format-string checking on dupprintf, by declaring
it in misc.h to have the appropriate GNU-specific attribute. This
pointed out a selection of warnings, which I've fixed.
[originally from svn r10084]
zero but does it in such a way that over-clever compilers hopefully
won't helpfully optimise the call away if you do it just before
freeing something or letting it go out of scope. Use this for
(hopefully) every memset whose job is to destroy sensitive data that
might otherwise be left lying around in the process's memory.
[originally from svn r9586]
'Config' in putty.h, which stores all PuTTY's settings and includes an
arbitrary length limit on every single one of those settings which is
stored in string form. In place of it is 'Conf', an opaque data type
everywhere outside the new file conf.c, which stores a list of (key,
value) pairs in which every key contains an integer identifying a
configuration setting, and for some of those integers the key also
contains extra parts (so that, for instance, CONF_environmt is a
string-to-string mapping). Everywhere that a Config was previously
used, a Conf is now; everywhere there was a Config structure copy,
conf_copy() is called; every lookup, adjustment, load and save
operation on a Config has been rewritten; and there's a mechanism for
serialising a Conf into a binary blob and back for use with Duplicate
Session.
User-visible effects of this change _should_ be minimal, though I
don't doubt I've introduced one or two bugs here and there which will
eventually be found. The _intended_ visible effects of this change are
that all arbitrary limits on configuration strings and lists (e.g.
limit on number of port forwardings) should now disappear; that list
boxes in the configuration will now be displayed in a sorted order
rather than the arbitrary order in which they were added to the list
(since the underlying data structure is now a sorted tree234 rather
than an ad-hoc comma-separated string); and one more specific change,
which is that local and dynamic port forwardings on the same port
number are now mutually exclusive in the configuration (putting 'D' in
the key rather than the value was a mistake in the first place).
One other reorganisation as a result of this is that I've moved all
the dialog.c standard handlers (dlg_stdeditbox_handler and friends)
out into config.c, because I can't really justify calling them generic
any more. When they took a pointer to an arbitrary structure type and
the offset of a field within that structure, they were independent of
whether that structure was a Config or something completely different,
but now they really do expect to talk to a Conf, which can _only_ be
used for PuTTY configuration, so I've renamed them all things like
conf_editbox_handler and moved them out of the nominally independent
dialog-box management module into the PuTTY-specific config.c.
[originally from svn r9214]
icon, even if the program isn't running at the time, to be presented
with an application-defined collection of helpful links). The current
jump list is updated every time a saved session is loaded, and shows
the last few launchable saved sessions (i.e. not those like Default
Settings) that were loaded. Also, if Pageant or PuTTYgen or both is in
the same directory as the PuTTY binary, the jump list will present
links to launch those too.
Based on a patch sent last year by Daniel B. Roy, though it's barely
recognisable any more...
[originally from svn r9046]
to manually tweak the host name and port number under which the SSH
host key is read and written.
I've put it in the cross-platform Connection panel. Partly under the
flimsy pretext that other backends _can_ use it if they so wish (and
in fact it overrides the host name for title-bar purposes in all
network backends, though it has no other effect in anything but
SSH); but mostly because the SSH panel was too full already :-)
[originally from svn r8033]
there): `plink host -nc host2:port' causes the SSH connection's main
channel to be replaced with a direct-tcpip connection to the
specified destination. This feature is mainly designed for use as a
local proxy: setting your local proxy command to `plink %proxyhost
-nc %host:%port' lets you tunnel SSH over SSH with a minimum of
fuss. Works on all platforms.
[originally from svn r6823]
Pageant for local authentication. (This is a `don't use Pageant for
authentication at session startup' button rather than a `pretend
Pageant doesn't exist' button: that is, agent forwarding is
independent of this option.)
[originally from svn r6572]
abstracted out; replace loops structured around a single interaction
per loop with less tortuous code (fixes: `ki-multiprompt-crash',
`ssh1-bad-passphrase-crash'; makes `ssh2-password-expiry' and
`proxy-password-prompt' easier).
The new interaction abstraction has a lot of fields that are unused in
the current code (things like window captions); this is groundwork for
`gui-auth'. However, ssh.c still writes directly to stderr; that may
want to be fixed.
In the GUI apps, user interaction is moved to terminal.c. This should
make it easier to fix things like UTF-8 username entry, although I
haven't attempted to do so. Also, control character filtering can be
tailored to be appropriate for individual front-ends; so far I don't
promise anything other than not having made it any worse.
I've tried to test this fairly exhaustively (although Mac stuff is
untested, as usual). It all seems to basically work, but I bet there
are new bugs. (One I know about is that you can no longer make the
PuTTY window go away with a ^D at the password prompt; this should be
fixed.)
[originally from svn r6437]
[this svn revision also touched putty-wishlist]
portfwd[] array. (Not sure what would happen in this case, mind.)
Also modify -L/-R/-D code to cope with IPv4/IPv6 tunnels in saved settings.
[originally from svn r5440]
of polishing to bring them to what I think should in principle be
release quality. Unlike the unfix.org patches themselves, this
checkin enables IPv6 by default; if you want to leave it out, you
have to build with COMPAT=-DNO_IPV6.
I have tested that this compiles on Visual C 7 (so the nightlies
_should_ acquire IPv6 support without missing a beat), but since I
don't have IPv6 set up myself I haven't actually tested that it
_works_. It still seems to make correct IPv4 connections, but that's
all I've been able to verify for myself. Further testing is needed.
[originally from svn r5047]
[this svn revision also touched putty-wishlist]
PuTTY / Plink not to run a remote shell/command at all. Supported in
the GUI configuration and via the (OpenSSH-like) -N command-line
option.
No effort is currently made to arrange `nice' UI properties. If you
do this in GUI PuTTY, a full-size terminal window will still be
created, and will sit there with almost nothing in it throughout
your session. If you do it in Plink, Plink will not accept any kind
of request to terminate gracefully; you'll have to ^C or kill it.
Nonetheless, even this little will be useful to some people...
[originally from svn r4614]
before "-load" is processed so that it doesn't clobber it.
I've also changed the semantics of "-load" slightly for PSCP, PSFTP,
and Plink: if it's specified at all, it overrides (disables) the
implicit loading of session details based on a supplied hostname
elsewhere (on the grounds that the user is more likely to want the
"-load" session than the implicit session). (PuTTY itself doesn't do
implicit loading at all, so I haven't changed it.)
This means that all the PuTTY tools' behaviour is now consistent iff
"-load" is specified (otherwise, some tools have implicit-session, and
others don't).
However, I've not documented this behaviour, as there's a good chance
it will be swept away if and when we get round to sorting out how we
deal with settings from multiple sources. It's intended as a "do
something sensible" change.
[originally from svn r4352]
supports SOCKS 4, SOCKS 4A and SOCKS 5 (well, actually IPv6 in SOCKS
5 isn't supported, but it'll be no difficulty once I actually get
round to it). Thanks to Chas Honton for his `stone soup' patch: I
didn't end up actually using any of his code, but it galvanised me
into doing it properly myself :-)
[originally from svn r3055]
Simon Tatham
Ion Gaztañaga
Jacob Nevins
Ben Harris