This is a cleanup I started to notice a need for during the BinarySink
work. It removes a lot of faffing about casting things to char * or
unsigned char * so that some API will accept them, even though lots of
such APIs really take a plain 'block of raw binary data' argument and
don't care what C thinks the signedness of that data might be - they
may well reinterpret it back and forth internally.
So I've tried to arrange for all the function call APIs that ought to
have a void * (or const void *) to have one, and those that need to do
pointer arithmetic on the parameter internally can cast it back at the
top of the function. That saves endless ad-hoc casts at the call
sites.
It's an incoherent concept! There should not be any such thing as an
error box that terminates the entire program but is not modal. If it's
bad enough to terminate the whole program, i.e. _all_ currently live
connections, then there's no point in permitting progress to continue
in windows other than the affected one, because all windows are
affected anyway.
So all previous uses of fatalbox() have become modalfatalbox(), except
those which looked to me as if they shouldn't have been fatal in the
first place, e.g. lingering pieces of error handling in winnet.c which
ought to have had the severity of 'give up on this particular Socket
and close it' rather than 'give up on the ENTIRE UNIVERSE'.
Ilya Shipitsin sent me a list of errors reported by a tool 'cppcheck',
which I hadn't seen before, together with some fixes for things
already taken off that list. This change picks out all the things from
the remaining list that I could quickly identify as actual errors,
which it turns out are all format-string goofs along the lines of
using a %d with an unsigned int, or a %u with a signed int, or (in the
cases in charset/utf8.c) an actual _size_ mismatch which could in
principle have caused trouble on a big-endian target.
We responded to a local error writing out the destination file by
going into a mode where we just looped round receiving and throwing
away data until our count of the file size reached the file size we
expected - but once we were in that mode, we never actually
incremented the count!
xfer_download_data could return actuallen as either 0 or -1 to
indicate EOF. Now it's always 0, and scp_recv_filedata actually checks
for that case and reports an error.
When called with -V to ask for our version, return 0 rather than 1.
This is the usual behaviour observed by ssh(1) and other Unix commands.
Also use exit() rather than cleanup_exit() in pscp.c and psftp.c ; at
this point we have nothing to cleanup!
Partly to reassure the user that they got what they asked for, and
partly so that's a clue for us in the logs when we get bug reports.
This involved repurposing platform_psftp_post_option_setup() (no longer
used since e22120fe) as platform_psftp_pre_conn_setup(), and moving it
to after logging is set up.
This shows the build platform (32- vs 64-bit in particular, and also
whether Unix GTK builds were compiled with or without the X11 pieces),
what compiler was used to build the binary, and any interesting build
options that might have been set on the make command line (especially,
but not limited to, the security-damaging ones like NO_SECURITY or
UNPROTECT). This will probably be useful all over the place, but in
particular it should allow the different Windows binaries to be told
apart!
Commits 21101c739 and 2eb952ca3 laid the groundwork for this, by
allowing the various About boxes to contain free text and also
ensuring they could be copied and pasted easily as part of a bug
report.
Formerly PuTTY's SFTP code would transmit (or buffer) a megabyte of data
before even starting to look for acknowledgements, but wouldn't allow
there to be more than a megabyte of unacknowledged data at a time. Now,
instead, it pays attention to whether the transmit path is blocked, and
transmits iff it isn't.
This should mean that SFTP goes faster over long fat pipes, and also
doesn't end up buffering so much over thin ones.
I practice, I tend to run into other performance limitations (such as
TCP or SSH-2 windows) before this enhancement looks particularly good,
but with an artificial lag of 250 ms on the loopback interface this
patch almost doubles my upload speed, so I think it's worthwhile.
Protecting our processes from outside interference need not be limited
to just PuTTY: there's no reason why the other SSH-speaking tools
shouldn't have the same treatment (PSFTP, PSCP, Plink), and PuTTYgen
and Pageant which handle private key material.
There was a rogue sscanf("%s") with no field width limit, targeting a
stack-based buffer, and scanning a string containing untrusted data.
It occurs in the 'sink' side of the protocol, i.e. when downloading
files *from* the server.
Our own bug id for this vulnerability is 'vuln-pscp-sink-sscanf'.
TOOLTYPE_NONNETWORK (i.e. pterm) already has "-log" (as does Unix
PuTTY), so there's no sense suppressing the synonym "-sessionlog".
Undocumented lacunae that remain:
plink accepts -sessionlog, but does nothing with it. Arguably it should.
puttytel accepts -sshlog/-sshrawlog (and happily logs e.g. Telnet
negotiation, as does PuTTY proper).
(cherry picked from commit a454399ec8)
Conflicts:
unix/uxplink.c
windows/winplink.c
(cherry-picker's notes: the conflict was only contextual, in the Plink
help output)
TOOLTYPE_NONNETWORK (i.e. pterm) already has "-log" (as does Unix
PuTTY), so there's no sense suppressing the synonym "-sessionlog".
Undocumented lacunae that remain:
plink accepts -sessionlog, but does nothing with it. Arguably it should.
puttytel accepts -sshlog/-sshrawlog (and happily logs e.g. Telnet
negotiation, as does PuTTY proper).
I noticed that Unix PSCP was unwantedly renaming downloaded files
which had a backslash in their names, because pscp.c's stripslashes()
treated \ as a path component separator, since it hadn't been modified
since PSCP ran on Windows only.
It also turns out that pscp.c, psftp.c and winsftp.c all had a
stripslashes(), and they didn't all have quite the same prototype. So
now there's one in winsftp.c and one in uxsftp.c, with appropriate
OS-dependent behaviour, and the ones in pscp.c and psftp.c are gone.
Having found a lot of unfixed constness issues in recent development,
I thought perhaps it was time to get proactive, so I compiled the
whole codebase with -Wwrite-strings. That turned up a huge load of
const problems, which I've fixed in this commit: the Unix build now
goes cleanly through with -Wwrite-strings, and the Windows build is as
close as I could get it (there are some lingering issues due to
occasional Windows API functions like AcquireCredentialsHandle not
having the right constness).
Notable fallout beyond the purely mechanical changing of types:
- the stuff saved by cmdline_save_param() is now explicitly
dupstr()ed, and freed in cmdline_run_saved.
- I couldn't make both string arguments to cmdline_process_param()
const, because it intentionally writes to one of them in the case
where it's the argument to -pw (in the vain hope of being at least
slightly friendly to 'ps'), so elsewhere I had to temporarily
dupstr() something for the sake of passing it to that function
- I had to invent a silly parallel version of const_cmp() so I could
pass const string literals in to lookup functions.
- stripslashes() in pscp.c and psftp.c has the annoying strchr nature
I'm not actually sure why we've always had back ends notify ldisc of
changes to echo/edit settings by giving ldisc_send(ldisc,NULL,0,0) a
special meaning, instead of by having a separate dedicated notify
function with its own prototype and parameter set. Coverity's recent
observation that the two kinds of call don't even have the same
requirements on the ldisc (particularly, whether ldisc->term can be
NULL) makes me realise that it's really high time I separated the two
conceptually different operations into actually different functions.
While I'm here, I've renamed the confusing ldisc_update() function
which that special operation ends up feeding to, because it's not
actually a function applying to an ldisc - it applies to a front end.
So ldisc_send(ldisc,NULL,0,0) is now ldisc_echoedit_update(ldisc), and
that in turn figures out the current echo/edit settings before passing
them on to frontend_echoedit_update(). I think that should be clearer.
I've gone through everywhere we handle host names / addresses (on
command lines, in PuTTY config, in port forwarding, in X display
names, in host key storage...) and tried to make them handle IPv6
literals sensibly, by using the host_str* functions I introduced in my
previous commit. Generally it's now OK to use a bracketed IPv6 literal
anywhere a hostname might have been valid; in a few cases where no
ambiguity exists (e.g. no :port suffix is permitted anyway)
unbracketed IPv6 literals are also acceptable.
[originally from svn r10120]
The basic strategy is described at the top of the new source file
sshshare.c. In very brief: an 'upstream' PuTTY opens a Unix-domain
socket or Windows named pipe, and listens for connections from other
PuTTYs wanting to run sessions on the same server. The protocol spoken
down that socket/pipe is essentially the bare ssh-connection protocol,
using a trivial binary packet protocol with no encryption, and the
upstream has to do some fiddly transformations that I've been
referring to as 'channel-number NAT' to avoid resource clashes between
the sessions it's managing.
This is quite different from OpenSSH's approach of using the Unix-
domain socket as a means of passing file descriptors around; the main
reason for that is that fd-passing is Unix-specific but this system
has to work on Windows too. However, there are additional advantages,
such as making it easy for each downstream PuTTY to run its own
independent set of port and X11 forwardings (though the method for
making the latter work is quite painful).
Sharing is off by default, but configuration is intended to be very
easy in the normal case - just tick one box in the SSH config panel
and everything else happens automatically.
[originally from svn r10083]
pscp.c when I did the big revamp in r9279: I assumed that in any SCP
connection we would be the first to send EOF, but in fact this isn't
true - doing downloads with old-SCP, EOF is initiated by the server,
so we were spuriously reporting an error for 'unexpected' EOF when
everything had gone fine. Thanks to Nathan Phelan for the report.
[originally from svn r10016]
[r9279 == 947962e0b9]
within the same string that destfname points to the start of, so
freeing it causes at best a double-free of destfname and more likely a
free of something that isn't even the start of an allocated block.
[originally from svn r9974]
[r9916 == cc4f38df14]
that the user really ought to know but that are not actually fatal to
continued operation of PuTTY or a single network connection.
[originally from svn r9932]
effect of handling it, but they do not free it if it isn't a packet
they recognise as part of their upload/download. Invent a return value
that specifically signals this, and consistently free pktin at every
call site if that return value comes back. Also, ensure that that
return value also always comes with something meaningful in fxp_error.
[originally from svn r9915]
own newline before the one tell_user puts on the end anyway. Also,
while I'm here, make up my mind about whether to prefix messages with
"scp:" or "pscp:" - I choose the latter.
[originally from svn r9914]
array pointer, _even_ if you're asking it to sort zero elements so
that in principle it should never dereference that pointer. Fix the
four instances in PSCP/PSFTP where this was previously occurring.
[originally from svn r9912]
places we simply enforce by assertion that it will match the request
we sent out a moment ago: in fact it can also return NULL, so it makes
more sense to report a proper error message if it doesn't return the
expected value, and while we're at it, have that error message
whatever message was helpfully left in fxp_error() by
sftp_find_request when it failed.
To do this, I've written a centralised function in psftp.c called
sftp_wait_for_reply, which is handed a request that's just been sent
out and deals with the mechanics of waiting for its reply, returning
the reply when it arrives, and aborting with a sensible error if
anything else arrives instead. The numerous sites in psftp.c which
called sftp_find_request have all been rewritten to do this instead,
and as a side effect they now look more sensible. The only other uses
of sftp_find_request were in xfer_*load_gotpkt, which had to be
tweaked in its own way.
While I'm here, also fix memory management in sftp_find_request, which
was freeing its input packet on some but not all error return paths.
[originally from svn r9894]
Well, at least across all command-line tools on both Windows and Unix,
and the GTK apps on Unix too. The Windows GUI apps fundamentally can't
write to standard output and it doesn't seem sensible to use message
boxes for these purposes :-)
[originally from svn r9673]
data channels. Should comprehensively fix 'half-closed', in principle,
though it's a big and complicated change and so there's a good chance
I've made at least one mistake somewhere.
All connections should now be rigorous about propagating end-of-file
(or end-of-data-stream, or socket shutdown, or whatever) independently
in both directions, except in frontends with no mechanism for sending
explicit EOF (e.g. interactive terminal windows) or backends which are
basically always used for interactive sessions so it's unlikely that
an application would be depending on independent EOF (telnet, rlogin).
EOF should now never accidentally be sent while there's still buffered
data to go out before it. (May help fix 'portfwd-corrupt', and also I
noticed recently that the ssh main session channel can accidentally
have MSG_EOF sent before the output bufchain is clear, leading to
embarrassment when it subsequently does send the output).
[originally from svn r9279]
I think I have to consider this to be a separate but related change to
the wishlist item 'pscp-filemodes'; that was written before the Unix
port existed, and referred to the ability to configure the permissions
used for files copied from Windows to Unix - which is still not done.
[originally from svn r9260]
'Config' in putty.h, which stores all PuTTY's settings and includes an
arbitrary length limit on every single one of those settings which is
stored in string form. In place of it is 'Conf', an opaque data type
everywhere outside the new file conf.c, which stores a list of (key,
value) pairs in which every key contains an integer identifying a
configuration setting, and for some of those integers the key also
contains extra parts (so that, for instance, CONF_environmt is a
string-to-string mapping). Everywhere that a Config was previously
used, a Conf is now; everywhere there was a Config structure copy,
conf_copy() is called; every lookup, adjustment, load and save
operation on a Config has been rewritten; and there's a mechanism for
serialising a Conf into a binary blob and back for use with Duplicate
Session.
User-visible effects of this change _should_ be minimal, though I
don't doubt I've introduced one or two bugs here and there which will
eventually be found. The _intended_ visible effects of this change are
that all arbitrary limits on configuration strings and lists (e.g.
limit on number of port forwardings) should now disappear; that list
boxes in the configuration will now be displayed in a sorted order
rather than the arbitrary order in which they were added to the list
(since the underlying data structure is now a sorted tree234 rather
than an ad-hoc comma-separated string); and one more specific change,
which is that local and dynamic port forwardings on the same port
number are now mutually exclusive in the configuration (putting 'D' in
the key rather than the value was a mistake in the first place).
One other reorganisation as a result of this is that I've moved all
the dialog.c standard handlers (dlg_stdeditbox_handler and friends)
out into config.c, because I can't really justify calling them generic
any more. When they took a pointer to an arbitrary structure type and
the offset of a field within that structure, they were independent of
whether that structure was a Config or something completely different,
but now they really do expect to talk to a Conf, which can _only_ be
used for PuTTY configuration, so I've renamed them all things like
conf_editbox_handler and moved them out of the nominally independent
dialog-box management module into the PuTTY-specific config.c.
[originally from svn r9214]
name the proxy using the global 'appname' variable, instead of
statically calling it PuTTY.
(Knock-on effect is that PSCP and PSFTP have to declare that
variable, though of course they shouldn't ever actually _use_ the X
forwarding code. Probably I ought to replace it with a stub
nox11fwd.c for those applications.)
[originally from svn r8501]
channel, arrange to set the SSH-2 window size to something very
large. This prevents the connection stalling when the window fills
up, and means that PSCP receives data _much_ faster.
[originally from svn r7672]
it up for later. This should prevent hangs when talking to particularly
enthusiastic servers.
Thanks to JCA for tracking this bug down.
[originally from svn r7651]
it's NULL. Since we already have one back end (uxpty) which doesn't
in fact talk to a network socket, and may well have more soon, I'm
replacing this TCP/IP-centric function with a nice neutral
`connected' function returning a boolean. Nothing else about its
semantics has currently changed.
[originally from svn r6810]
we set _FILE_OFFSET_BITS to 64 on the compiler command line (via mkfiles.pl),
and on Windows we use SetFilePointer and GetFileSize to cope with 64-bit sizes
where possible. Not tested on Win9x.
[originally from svn r6783]
Simon Tatham
Owen Dunn
Jacob Nevins
Ben Harris