/* * Support for SSH connection sharing, i.e. permitting one PuTTY to * open its own channels over the SSH session being run by another. */ /* * Discussion and technical documentation * ====================================== * * The basic strategy for PuTTY's implementation of SSH connection * sharing is to have a single 'upstream' PuTTY process, which manages * the real SSH connection and all the cryptography, and then zero or * more 'downstream' PuTTYs, which never talk to the real host but * only talk to the upstream through local IPC (Unix-domain sockets or * Windows named pipes). * * The downstreams communicate with the upstream using a protocol * derived from SSH itself, which I'll document in detail below. In * brief, though: the downstream->upstream protocol uses a trivial * binary packet protocol (just length/type/data) to encapsulate * unencrypted SSH messages, and downstreams talk to the upstream more * or less as if it was an SSH server itself. (So downstreams can * themselves open multiple SSH channels, for example, by sending * multiple SSH2_MSG_CHANNEL_OPENs; they can send CHANNEL_REQUESTs of * their choice within each channel, and they handle their own * WINDOW_ADJUST messages.) * * The upstream would ideally handle these downstreams by just putting * their messages into the queue for proper SSH-2 encapsulation and * encryption and sending them straight on to the server. However, * that's not quite feasible as written, because client-side channel * IDs could easily conflict (between multiple downstreams, or between * a downstream and the upstream). To protect against that, the * upstream rewrites the client-side channel IDs in messages it passes * on to the server, so that it's performing what you might describe * as 'channel-number NAT'. Then the upstream remembers which of its * own channel IDs are channels it's managing itself, and which are * placeholders associated with a particular downstream, so that when * replies come in from the server they can be sent on to the relevant * downstream (after un-NATting the channel number, of course). * * Global requests from downstreams are only accepted if the upstream * knows what to do about them; currently the only such requests are * the ones having to do with remote-to-local port forwarding (in * which, again, the upstream remembers that some of the forwardings * it's asked the server to set up were on behalf of particular * downstreams, and sends the incoming CHANNEL_OPENs to those * downstreams when connections come in). * * Other fiddly pieces of this mechanism are X forwarding and * (OpenSSH-style) agent forwarding. Both of these have a fundamental * problem arising from the protocol design: that the CHANNEL_OPEN * from the server introducing a forwarded connection does not carry * any indication of which session channel gave rise to it; so if * session channels from multiple downstreams enable those forwarding * methods, it's hard for the upstream to know which downstream to * send the resulting connections back to. * * For X forwarding, we can work around this in a really painful way * by using the fake X11 authorisation data sent to the server as part * of the forwarding setup: upstream ensures that every X forwarding * request carries distinguishable fake auth data, and then when X * connections come in it waits to see the auth data in the X11 setup * message before it decides which downstream to pass the connection * on to. * * For agent forwarding, that workaround is unavailable. As a result, * this system (and, as far as I can think of, any other system too) * has the fundamental constraint that it can only forward one SSH * agent - it can't forward two agents to different session channels. * So downstreams can request agent forwarding if they like, but if * they do, they'll get whatever SSH agent is known to the upstream * (if any) forwarded to their sessions. * * Downstream-to-upstream protocol * ------------------------------- * * Here I document in detail the protocol spoken between PuTTY * downstreams and upstreams over local IPC. The IPC mechanism can * vary between host platforms, but the protocol is the same. * * The protocol commences with a version exchange which is exactly * like the SSH-2 one, in that each side sends a single line of text * of the form * * -- [comments] \r\n * * The only difference is that in real SSH-2, is the string * "SSH", whereas in this protocol the string is * "SSHCONNECTION@putty.projects.tartarus.org". * * (The SSH RFCs allow many protocol-level identifier namespaces to be * extended by implementors without central standardisation as long as * they suffix "@" and a domain name they control to their new ids. * RFC 4253 does not define this particular name to be changeable at * all, but I like to think this is obviously how it would have done * so if the working group had foreseen the need :-) * * Thereafter, all data exchanged consists of a sequence of binary * packets concatenated end-to-end, each of which is of the form * * uint32 length of packet, N * byte[N] N bytes of packet data * * and, since these are SSH-2 messages, the first data byte is taken * to be the packet type code. * * These messages are interpreted as those of an SSH connection, after * userauth completes, and without any repeat key exchange. * Specifically, any message from the SSH Connection Protocol is * permitted, and also SSH_MSG_IGNORE, SSH_MSG_DEBUG, * SSH_MSG_DISCONNECT and SSH_MSG_UNIMPLEMENTED from the SSH Transport * Protocol. * * This protocol imposes a few additional requirements, over and above * those of the standard SSH Connection Protocol: * * Message sizes are not permitted to exceed 0x4010 (16400) bytes, * including their length header. * * When the server (i.e. really the PuTTY upstream) sends * SSH_MSG_CHANNEL_OPEN with channel type "x11", and the client * (downstream) responds with SSH_MSG_CHANNEL_OPEN_CONFIRMATION, that * confirmation message MUST include an initial window size of at * least 256. (Rationale: this is a bit of a fudge which makes it * easier, by eliminating the possibility of nasty edge cases, for an * upstream to arrange not to pass the CHANNEL_OPEN on to downstream * until after it's seen the X11 auth data to decide which downstream * it needs to go to.) */ #include #include #include #include #include #include "putty.h" #include "tree234.h" #include "ssh.h" struct ssh_sharing_state { const struct plug_function_table *fn; /* the above variable absolutely *must* be the first in this structure */ char *sockname; /* the socket name, kept for cleanup */ Socket listensock; /* the master listening Socket */ tree234 *connections; /* holds ssh_sharing_connstates */ unsigned nextid; /* preferred id for next connstate */ Ssh ssh; /* instance of the ssh backend */ char *server_verstring; /* server version string after "SSH-" */ }; struct share_globreq; struct ssh_sharing_connstate { const struct plug_function_table *fn; /* the above variable absolutely *must* be the first in this structure */ unsigned id; /* used to identify this downstream in log messages */ Socket sock; /* the Socket for this connection */ struct ssh_sharing_state *parent; int crLine; /* coroutine state for share_receive */ int sent_verstring, got_verstring, curr_packetlen; unsigned char recvbuf[0x4010]; int recvlen; /* * Assorted state we have to remember about this downstream, so * that we can clean it up appropriately when the downstream goes * away. */ /* Channels which don't have a downstream id, i.e. we've passed a * CHANNEL_OPEN down from the server but not had an * OPEN_CONFIRMATION or OPEN_FAILURE back. If downstream goes * away, we respond to all of these with OPEN_FAILURE. */ tree234 *halfchannels; /* stores 'struct share_halfchannel' */ /* Channels which do have a downstream id. We need to index these * by both server id and upstream id, so we can find a channel * when handling either an upward or a downward message referring * to it. */ tree234 *channels_by_us; /* stores 'struct share_channel' */ tree234 *channels_by_server; /* stores 'struct share_channel' */ /* Another class of channel which doesn't have a downstream id. * The difference between these and halfchannels is that xchannels * do have an *upstream* id, because upstream has already accepted * the channel request from the server. This arises in the case of * X forwarding, where we have to accept the request and read the * X authorisation data before we know whether the channel needs * to be forwarded to a downstream. */ tree234 *xchannels_by_us; /* stores 'struct share_xchannel' */ tree234 *xchannels_by_server; /* stores 'struct share_xchannel' */ /* Remote port forwarding requests in force. */ tree234 *forwardings; /* stores 'struct share_forwarding' */ /* Global requests we've sent on to the server, pending replies. */ struct share_globreq *globreq_head, *globreq_tail; }; struct share_halfchannel { unsigned server_id; }; /* States of a share_channel. */ enum { OPEN, SENT_CLOSE, RCVD_CLOSE, /* Downstream has sent CHANNEL_OPEN but server hasn't replied yet. * If downstream goes away when a channel is in this state, we * must wait for the server's response before starting to send * CLOSE. Channels in this state are also not held in * channels_by_server, because their server_id field is * meaningless. */ UNACKNOWLEDGED }; struct share_channel { unsigned downstream_id, upstream_id, server_id; int downstream_maxpkt; int state; /* * Some channels (specifically, channels on which downstream has * sent "x11-req") have the additional function of storing a set * of downstream X authorisation data and a handle to an upstream * fake set. */ struct X11FakeAuth *x11_auth_upstream; int x11_auth_proto; char *x11_auth_data; int x11_auth_datalen; int x11_one_shot; }; struct share_forwarding { char *host; int port; int active; /* has the server sent REQUEST_SUCCESS? */ }; struct share_xchannel_message { struct share_xchannel_message *next; int type; unsigned char *data; int datalen; }; struct share_xchannel { unsigned upstream_id, server_id; /* * xchannels come in two flavours: live and dead. Live ones are * waiting for an OPEN_CONFIRMATION or OPEN_FAILURE from * downstream; dead ones have had an OPEN_FAILURE, so they only * exist as a means of letting us conveniently respond to further * channel messages from the server until such time as the server * sends us CHANNEL_CLOSE. */ int live; /* * When we receive OPEN_CONFIRMATION, we will need to send a * WINDOW_ADJUST to the server to synchronise the windows. For * this purpose we need to know what window we have so far offered * the server. We record this as exactly the value in the * OPEN_CONFIRMATION that upstream sent us, adjusted by the amount * by which the two X greetings differed in length. */ int window; /* * Linked list of SSH messages from the server relating to this * channel, which we queue up until downstream sends us an * OPEN_CONFIRMATION and we can belatedly send them all on. */ struct share_xchannel_message *msghead, *msgtail; }; enum { GLOBREQ_TCPIP_FORWARD, GLOBREQ_CANCEL_TCPIP_FORWARD }; struct share_globreq { struct share_globreq *next; int type; int want_reply; struct share_forwarding *fwd; }; static int share_connstate_cmp(void *av, void *bv) { const struct ssh_sharing_connstate *a = (const struct ssh_sharing_connstate *)av; const struct ssh_sharing_connstate *b = (const struct ssh_sharing_connstate *)bv; if (a->id < b->id) return -1; else if (a->id > b->id) return +1; else return 0; } static unsigned share_find_unused_id (struct ssh_sharing_state *sharestate, unsigned first) { int low_orig, low, mid, high, high_orig; struct ssh_sharing_connstate *cs; unsigned ret; /* * Find the lowest unused downstream ID greater or equal to * 'first'. * * Begin by seeing if 'first' itself is available. If it is, we'll * just return it; if it's already in the tree, we'll find the * tree index where it appears and use that for the next stage. */ { struct ssh_sharing_connstate dummy; dummy.id = first; cs = findrelpos234(sharestate->connections, &dummy, NULL, REL234_GE, &low_orig); if (!cs) return first; } /* * Now binary-search using the counted B-tree, to find the largest * ID which is in a contiguous sequence from the beginning of that * range. */ low = low_orig; high = high_orig = count234(sharestate->connections); while (high - low > 1) { mid = (high + low) / 2; cs = index234(sharestate->connections, mid); if (cs->id == first + (mid - low_orig)) low = mid; /* this one is still in the sequence */ else high = mid; /* this one is past the end */ } /* * Now low is the tree index of the largest ID in the initial * sequence. So the return value is one more than low's id, and we * know low's id is given by the formula in the binary search loop * above. * * (If an SSH connection went on for _enormously_ long, we might * reach a point where all ids from 'first' to UINT_MAX were in * use. In that situation the formula below would wrap round by * one and return zero, which is conveniently the right way to * signal 'no id available' from this function.) */ ret = first + (low - low_orig) + 1; { struct ssh_sharing_connstate dummy; dummy.id = ret; assert(NULL == find234(sharestate->connections, &dummy, NULL)); } return ret; } static int share_halfchannel_cmp(void *av, void *bv) { const struct share_halfchannel *a = (const struct share_halfchannel *)av; const struct share_halfchannel *b = (const struct share_halfchannel *)bv; if (a->server_id < b->server_id) return -1; else if (a->server_id > b->server_id) return +1; else return 0; } static int share_channel_us_cmp(void *av, void *bv) { const struct share_channel *a = (const struct share_channel *)av; const struct share_channel *b = (const struct share_channel *)bv; if (a->upstream_id < b->upstream_id) return -1; else if (a->upstream_id > b->upstream_id) return +1; else return 0; } static int share_channel_server_cmp(void *av, void *bv) { const struct share_channel *a = (const struct share_channel *)av; const struct share_channel *b = (const struct share_channel *)bv; if (a->server_id < b->server_id) return -1; else if (a->server_id > b->server_id) return +1; else return 0; } static int share_xchannel_us_cmp(void *av, void *bv) { const struct share_xchannel *a = (const struct share_xchannel *)av; const struct share_xchannel *b = (const struct share_xchannel *)bv; if (a->upstream_id < b->upstream_id) return -1; else if (a->upstream_id > b->upstream_id) return +1; else return 0; } static int share_xchannel_server_cmp(void *av, void *bv) { const struct share_xchannel *a = (const struct share_xchannel *)av; const struct share_xchannel *b = (const struct share_xchannel *)bv; if (a->server_id < b->server_id) return -1; else if (a->server_id > b->server_id) return +1; else return 0; } static int share_forwarding_cmp(void *av, void *bv) { const struct share_forwarding *a = (const struct share_forwarding *)av; const struct share_forwarding *b = (const struct share_forwarding *)bv; int i; if ((i = strcmp(a->host, b->host)) != 0) return i; else if (a->port < b->port) return -1; else if (a->port > b->port) return +1; else return 0; } static void share_xchannel_free(struct share_xchannel *xc) { while (xc->msghead) { struct share_xchannel_message *tmp = xc->msghead; xc->msghead = tmp->next; sfree(tmp); } sfree(xc); } static void share_connstate_free(struct ssh_sharing_connstate *cs) { struct share_halfchannel *hc; struct share_xchannel *xc; struct share_channel *chan; struct share_forwarding *fwd; while ((hc = (struct share_halfchannel *) delpos234(cs->halfchannels, 0)) != NULL) sfree(hc); freetree234(cs->halfchannels); /* All channels live in 'channels_by_us' but only some in * 'channels_by_server', so we use the former to find the list of * ones to free */ freetree234(cs->channels_by_server); while ((chan = (struct share_channel *) delpos234(cs->channels_by_us, 0)) != NULL) sfree(chan); freetree234(cs->channels_by_us); /* But every xchannel is in both trees, so it doesn't matter which * we use to free them. */ while ((xc = (struct share_xchannel *) delpos234(cs->xchannels_by_us, 0)) != NULL) share_xchannel_free(xc); freetree234(cs->xchannels_by_us); freetree234(cs->xchannels_by_server); while ((fwd = (struct share_forwarding *) delpos234(cs->forwardings, 0)) != NULL) sfree(fwd); freetree234(cs->forwardings); while (cs->globreq_head) { struct share_globreq *globreq = cs->globreq_head; cs->globreq_head = cs->globreq_head->next; sfree(globreq); } if (cs->sock) sk_close(cs->sock); sfree(cs); } void sharestate_free(void *v) { struct ssh_sharing_state *sharestate = (struct ssh_sharing_state *)v; struct ssh_sharing_connstate *cs; platform_ssh_share_cleanup(sharestate->sockname); while ((cs = (struct ssh_sharing_connstate *) delpos234(sharestate->connections, 0)) != NULL) { share_connstate_free(cs); } freetree234(sharestate->connections); if (sharestate->listensock) { sk_close(sharestate->listensock); sharestate->listensock = NULL; } sfree(sharestate->server_verstring); sfree(sharestate->sockname); sfree(sharestate); } static struct share_halfchannel *share_add_halfchannel (struct ssh_sharing_connstate *cs, unsigned server_id) { struct share_halfchannel *hc = snew(struct share_halfchannel); hc->server_id = server_id; if (add234(cs->halfchannels, hc) != hc) { /* Duplicate?! */ sfree(hc); return NULL; } else { return hc; } } static struct share_halfchannel *share_find_halfchannel (struct ssh_sharing_connstate *cs, unsigned server_id) { struct share_halfchannel dummyhc; dummyhc.server_id = server_id; return find234(cs->halfchannels, &dummyhc, NULL); } static void share_remove_halfchannel(struct ssh_sharing_connstate *cs, struct share_halfchannel *hc) { del234(cs->halfchannels, hc); sfree(hc); } static struct share_channel *share_add_channel (struct ssh_sharing_connstate *cs, unsigned downstream_id, unsigned upstream_id, unsigned server_id, int state, int maxpkt) { struct share_channel *chan = snew(struct share_channel); chan->downstream_id = downstream_id; chan->upstream_id = upstream_id; chan->server_id = server_id; chan->state = state; chan->downstream_maxpkt = maxpkt; chan->x11_auth_upstream = NULL; chan->x11_auth_data = NULL; chan->x11_auth_proto = -1; chan->x11_auth_datalen = 0; chan->x11_one_shot = 0; if (add234(cs->channels_by_us, chan) != chan) { sfree(chan); return NULL; } if (chan->state != UNACKNOWLEDGED) { if (add234(cs->channels_by_server, chan) != chan) { del234(cs->channels_by_us, chan); sfree(chan); return NULL; } } return chan; } static void share_channel_set_server_id(struct ssh_sharing_connstate *cs, struct share_channel *chan, unsigned server_id, int newstate) { chan->server_id = server_id; chan->state = newstate; assert(newstate != UNACKNOWLEDGED); add234(cs->channels_by_server, chan); } static struct share_channel *share_find_channel_by_upstream (struct ssh_sharing_connstate *cs, unsigned upstream_id) { struct share_channel dummychan; dummychan.upstream_id = upstream_id; return find234(cs->channels_by_us, &dummychan, NULL); } static struct share_channel *share_find_channel_by_server (struct ssh_sharing_connstate *cs, unsigned server_id) { struct share_channel dummychan; dummychan.server_id = server_id; return find234(cs->channels_by_server, &dummychan, NULL); } static void share_remove_channel(struct ssh_sharing_connstate *cs, struct share_channel *chan) { del234(cs->channels_by_us, chan); del234(cs->channels_by_server, chan); if (chan->x11_auth_upstream) ssh_sharing_remove_x11_display(cs->parent->ssh, chan->x11_auth_upstream); sfree(chan->x11_auth_data); sfree(chan); } static struct share_xchannel *share_add_xchannel (struct ssh_sharing_connstate *cs, unsigned upstream_id, unsigned server_id) { struct share_xchannel *xc = snew(struct share_xchannel); xc->upstream_id = upstream_id; xc->server_id = server_id; xc->live = TRUE; xc->msghead = xc->msgtail = NULL; if (add234(cs->xchannels_by_us, xc) != xc) { sfree(xc); return NULL; } if (add234(cs->xchannels_by_server, xc) != xc) { del234(cs->xchannels_by_us, xc); sfree(xc); return NULL; } return xc; } static struct share_xchannel *share_find_xchannel_by_upstream (struct ssh_sharing_connstate *cs, unsigned upstream_id) { struct share_xchannel dummyxc; dummyxc.upstream_id = upstream_id; return find234(cs->xchannels_by_us, &dummyxc, NULL); } static struct share_xchannel *share_find_xchannel_by_server (struct ssh_sharing_connstate *cs, unsigned server_id) { struct share_xchannel dummyxc; dummyxc.server_id = server_id; return find234(cs->xchannels_by_server, &dummyxc, NULL); } static void share_remove_xchannel(struct ssh_sharing_connstate *cs, struct share_xchannel *xc) { del234(cs->xchannels_by_us, xc); del234(cs->xchannels_by_server, xc); share_xchannel_free(xc); } static struct share_forwarding *share_add_forwarding (struct ssh_sharing_connstate *cs, const char *host, int port) { struct share_forwarding *fwd = snew(struct share_forwarding); fwd->host = dupstr(host); fwd->port = port; fwd->active = FALSE; if (add234(cs->forwardings, fwd) != fwd) { /* Duplicate?! */ sfree(fwd); return NULL; } return fwd; } static struct share_forwarding *share_find_forwarding (struct ssh_sharing_connstate *cs, const char *host, int port) { struct share_forwarding dummyfwd, *ret; dummyfwd.host = dupstr(host); dummyfwd.port = port; ret = find234(cs->forwardings, &dummyfwd, NULL); sfree(dummyfwd.host); return ret; } static void share_remove_forwarding(struct ssh_sharing_connstate *cs, struct share_forwarding *fwd) { del234(cs->forwardings, fwd); sfree(fwd); } static void send_packet_to_downstream(struct ssh_sharing_connstate *cs, int type, const void *pkt, int pktlen, struct share_channel *chan) { if (!cs->sock) /* throw away all packets destined for a dead downstream */ return; if (type == SSH2_MSG_CHANNEL_DATA) { /* * Special case which we take care of at a low level, so as to * be sure to apply it in all cases. On rare occasions we * might find that we have a channel for which the * downstream's maximum packet size exceeds the max packet * size we presented to the server on its behalf. (This can * occur in X11 forwarding, where we have to send _our_ * CHANNEL_OPEN_CONFIRMATION before we discover which if any * downstream the channel is destined for, so if that * downstream turns out to present a smaller max packet size * then we're in this situation.) * * If that happens, we just chop up the packet into pieces and * send them as separate CHANNEL_DATA packets. */ const char *upkt = (const char *)pkt; char header[13]; /* 4 length + 1 type + 4 channel id + 4 string len */ int len = toint(GET_32BIT(upkt + 4)); upkt += 8; /* skip channel id + length field */ if (len < 0 || len > pktlen - 8) len = pktlen - 8; do { int this_len = (len > chan->downstream_maxpkt ? chan->downstream_maxpkt : len); PUT_32BIT(header, this_len + 9); header[4] = type; PUT_32BIT(header + 5, chan->downstream_id); PUT_32BIT(header + 9, this_len); sk_write(cs->sock, header, 13); sk_write(cs->sock, upkt, this_len); len -= this_len; upkt += this_len; } while (len > 0); } else { /* * Just do the obvious thing. */ char header[9]; PUT_32BIT(header, pktlen + 1); header[4] = type; sk_write(cs->sock, header, 5); sk_write(cs->sock, pkt, pktlen); } } static void share_try_cleanup(struct ssh_sharing_connstate *cs) { int i; struct share_halfchannel *hc; struct share_channel *chan; struct share_forwarding *fwd; /* * Any half-open channels, i.e. those for which we'd received * CHANNEL_OPEN from the server but not passed back a response * from downstream, should be responded to with OPEN_FAILURE. */ while ((hc = (struct share_halfchannel *) index234(cs->halfchannels, 0)) != NULL) { static const char reason[] = "PuTTY downstream no longer available"; static const char lang[] = "en"; unsigned char packet[256]; int pos = 0; PUT_32BIT(packet + pos, hc->server_id); pos += 4; PUT_32BIT(packet + pos, SSH2_OPEN_CONNECT_FAILED); pos += 4; PUT_32BIT(packet + pos, strlen(reason)); pos += 4; memcpy(packet + pos, reason, strlen(reason)); pos += strlen(reason); PUT_32BIT(packet + pos, strlen(lang)); pos += 4; memcpy(packet + pos, lang, strlen(lang)); pos += strlen(lang); ssh_send_packet_from_downstream(cs->parent->ssh, cs->id, SSH2_MSG_CHANNEL_OPEN_FAILURE, packet, pos, "cleanup after" " downstream went away"); share_remove_halfchannel(cs, hc); } /* * Any actually open channels should have a CHANNEL_CLOSE sent for * them, unless we've already done so. We won't be able to * actually clean them up until CHANNEL_CLOSE comes back from the * server, though (unless the server happens to have sent a CLOSE * already). * * Another annoying exception is UNACKNOWLEDGED channels, i.e. * we've _sent_ a CHANNEL_OPEN to the server but not received an * OPEN_CONFIRMATION or OPEN_FAILURE. We must wait for a reply * before closing the channel, because until we see that reply we * won't have the server's channel id to put in the close message. */ for (i = 0; (chan = (struct share_channel *) index234(cs->channels_by_us, i)) != NULL; i++) { unsigned char packet[256]; int pos = 0; if (chan->state != SENT_CLOSE && chan->state != UNACKNOWLEDGED) { PUT_32BIT(packet + pos, chan->server_id); pos += 4; ssh_send_packet_from_downstream(cs->parent->ssh, cs->id, SSH2_MSG_CHANNEL_CLOSE, packet, pos, "cleanup after" " downstream went away"); if (chan->state != RCVD_CLOSE) { chan->state = SENT_CLOSE; } else { /* In this case, we _can_ clear up the channel now. */ ssh_delete_sharing_channel(cs->parent->ssh, chan->upstream_id); share_remove_channel(cs, chan); i--; /* don't accidentally skip one as a result */ } } } /* * Any remote port forwardings we're managing on behalf of this * downstream should be cancelled. Again, we must defer those for * which we haven't yet seen REQUEST_SUCCESS/FAILURE. * * We take a fire-and-forget approach during cleanup, not * bothering to set want_reply. */ for (i = 0; (fwd = (struct share_forwarding *) index234(cs->forwardings, i)) != NULL; i++) { if (fwd->active) { static const char request[] = "cancel-tcpip-forward"; char *packet = snewn(256 + strlen(fwd->host), char); int pos = 0; PUT_32BIT(packet + pos, strlen(request)); pos += 4; memcpy(packet + pos, request, strlen(request)); pos += strlen(request); packet[pos++] = 0; /* !want_reply */ PUT_32BIT(packet + pos, strlen(fwd->host)); pos += 4; memcpy(packet + pos, fwd->host, strlen(fwd->host)); pos += strlen(fwd->host); PUT_32BIT(packet + pos, fwd->port); pos += 4; ssh_send_packet_from_downstream(cs->parent->ssh, cs->id, SSH2_MSG_GLOBAL_REQUEST, packet, pos, "cleanup after" " downstream went away"); sfree(packet); share_remove_forwarding(cs, fwd); i--; /* don't accidentally skip one as a result */ } } if (count234(cs->halfchannels) == 0 && count234(cs->channels_by_us) == 0 && count234(cs->forwardings) == 0) { /* * Now we're _really_ done, so we can get rid of cs completely. */ del234(cs->parent->connections, cs); ssh_sharing_downstream_disconnected(cs->parent->ssh, cs->id); share_connstate_free(cs); } } static void share_begin_cleanup(struct ssh_sharing_connstate *cs) { sk_close(cs->sock); cs->sock = NULL; share_try_cleanup(cs); } static void share_disconnect(struct ssh_sharing_connstate *cs, const char *message) { static const char lang[] = "en"; int msglen = strlen(message); char *packet = snewn(msglen + 256, char); int pos = 0; PUT_32BIT(packet + pos, SSH2_DISCONNECT_PROTOCOL_ERROR); pos += 4; PUT_32BIT(packet + pos, msglen); pos += 4; memcpy(packet + pos, message, msglen); pos += msglen; PUT_32BIT(packet + pos, strlen(lang)); pos += 4; memcpy(packet + pos, lang, strlen(lang)); pos += strlen(lang); send_packet_to_downstream(cs, SSH2_MSG_DISCONNECT, packet, pos, NULL); share_begin_cleanup(cs); } static void share_closing(Plug plug, const char *error_msg, int error_code, int calling_back) { struct ssh_sharing_connstate *cs = (struct ssh_sharing_connstate *)plug; if (error_msg) { #ifdef BROKEN_PIPE_ERROR_CODE /* * Most of the time, we log what went wrong when a downstream * disappears with a socket error. One exception, though, is * receiving EPIPE when we haven't received a protocol version * string from the downstream, because that can happen as a result * of plink -shareexists (opening the connection and instantly * closing it again without bothering to read our version string). * So that one case is not treated as a log-worthy error. */ if (error_code == BROKEN_PIPE_ERROR_CODE && !cs->got_verstring) /* do nothing */; else #endif ssh_sharing_logf(cs->parent->ssh, cs->id, "Socket error: %s", error_msg); } share_begin_cleanup(cs); } static int getstring_inner(const void *vdata, int datalen, char **out, int *outlen) { const unsigned char *data = (const unsigned char *)vdata; int len; if (datalen < 4) return FALSE; len = toint(GET_32BIT(data)); if (len < 0 || len > datalen - 4) return FALSE; if (outlen) *outlen = len + 4; /* total size including length field */ if (out) *out = dupprintf("%.*s", len, (char *)data + 4); return TRUE; } static char *getstring(const void *data, int datalen) { char *ret; if (getstring_inner(data, datalen, &ret, NULL)) return ret; else return NULL; } static int getstring_size(const void *data, int datalen) { int ret; if (getstring_inner(data, datalen, NULL, &ret)) return ret; else return -1; } /* * Append a message to the end of an xchannel's queue, with the length * and type code filled in and the data block allocated but * uninitialised. */ struct share_xchannel_message *share_xchannel_add_message (struct share_xchannel *xc, int type, int len) { unsigned char *block; struct share_xchannel_message *msg; /* * Be a little tricksy here by allocating a single memory block * containing both the 'struct share_xchannel_message' and the * actual data. Simplifies freeing it later. */ block = smalloc(sizeof(struct share_xchannel_message) + len); msg = (struct share_xchannel_message *)block; msg->data = block + sizeof(struct share_xchannel_message); msg->datalen = len; msg->type = type; /* * Queue it in the xchannel. */ if (xc->msgtail) xc->msgtail->next = msg; else xc->msghead = msg; msg->next = NULL; xc->msgtail = msg; return msg; } void share_dead_xchannel_respond(struct ssh_sharing_connstate *cs, struct share_xchannel *xc) { /* * Handle queued incoming messages from the server destined for an * xchannel which is dead (i.e. downstream sent OPEN_FAILURE). */ int delete = FALSE; while (xc->msghead) { struct share_xchannel_message *msg = xc->msghead; xc->msghead = msg->next; if (msg->type == SSH2_MSG_CHANNEL_REQUEST && msg->datalen > 4) { /* * A CHANNEL_REQUEST is responded to by sending * CHANNEL_FAILURE, if it has want_reply set. */ int wantreplypos = getstring_size(msg->data, msg->datalen); if (wantreplypos > 0 && wantreplypos < msg->datalen && msg->data[wantreplypos] != 0) { unsigned char id[4]; PUT_32BIT(id, xc->server_id); ssh_send_packet_from_downstream (cs->parent->ssh, cs->id, SSH2_MSG_CHANNEL_FAILURE, id, 4, "downstream refused X channel open"); } } else if (msg->type == SSH2_MSG_CHANNEL_CLOSE) { /* * On CHANNEL_CLOSE we can discard the channel completely. */ delete = TRUE; } sfree(msg); } xc->msgtail = NULL; if (delete) { ssh_delete_sharing_channel(cs->parent->ssh, xc->upstream_id); share_remove_xchannel(cs, xc); } } void share_xchannel_confirmation(struct ssh_sharing_connstate *cs, struct share_xchannel *xc, struct share_channel *chan, unsigned downstream_window) { unsigned char window_adjust[8]; /* * Send all the queued messages downstream. */ while (xc->msghead) { struct share_xchannel_message *msg = xc->msghead; xc->msghead = msg->next; if (msg->datalen >= 4) PUT_32BIT(msg->data, chan->downstream_id); send_packet_to_downstream(cs, msg->type, msg->data, msg->datalen, chan); sfree(msg); } /* * Send a WINDOW_ADJUST back upstream, to synchronise the window * size downstream thinks it's presented with the one we've * actually presented. */ PUT_32BIT(window_adjust, xc->server_id); PUT_32BIT(window_adjust + 4, downstream_window - xc->window); ssh_send_packet_from_downstream(cs->parent->ssh, cs->id, SSH2_MSG_CHANNEL_WINDOW_ADJUST, window_adjust, 8, "window adjustment after" " downstream accepted X channel"); } void share_xchannel_failure(struct ssh_sharing_connstate *cs, struct share_xchannel *xc) { /* * If downstream refuses to open our X channel at all for some * reason, we must respond by sending an emergency CLOSE upstream. */ unsigned char id[4]; PUT_32BIT(id, xc->server_id); ssh_send_packet_from_downstream (cs->parent->ssh, cs->id, SSH2_MSG_CHANNEL_CLOSE, id, 4, "downstream refused X channel open"); /* * Now mark the xchannel as dead, and respond to anything sent on * it until we see CLOSE for it in turn. */ xc->live = FALSE; share_dead_xchannel_respond(cs, xc); } void share_setup_x11_channel(void *csv, void *chanv, unsigned upstream_id, unsigned server_id, unsigned server_currwin, unsigned server_maxpkt, unsigned client_adjusted_window, const char *peer_addr, int peer_port, int endian, int protomajor, int protominor, const void *initial_data, int initial_len) { struct ssh_sharing_connstate *cs = (struct ssh_sharing_connstate *)csv; struct share_channel *chan = (struct share_channel *)chanv; struct share_xchannel *xc; struct share_xchannel_message *msg; void *greeting; int greeting_len; unsigned char *pkt; int pktlen; /* * Create an xchannel containing data we've already received from * the X client, and preload it with a CHANNEL_DATA message * containing our own made-up authorisation greeting and any * additional data sent from the server so far. */ xc = share_add_xchannel(cs, upstream_id, server_id); greeting = x11_make_greeting(endian, protomajor, protominor, chan->x11_auth_proto, chan->x11_auth_data, chan->x11_auth_datalen, peer_addr, peer_port, &greeting_len); msg = share_xchannel_add_message(xc, SSH2_MSG_CHANNEL_DATA, 8 + greeting_len + initial_len); /* leave the channel id field unfilled - we don't know the * downstream id yet, of course */ PUT_32BIT(msg->data + 4, greeting_len + initial_len); memcpy(msg->data + 8, greeting, greeting_len); memcpy(msg->data + 8 + greeting_len, initial_data, initial_len); sfree(greeting); xc->window = client_adjusted_window + greeting_len; /* * Send on a CHANNEL_OPEN to downstream. */ pktlen = 27 + strlen(peer_addr); pkt = snewn(pktlen, unsigned char); PUT_32BIT(pkt, 3); /* strlen("x11") */ memcpy(pkt+4, "x11", 3); PUT_32BIT(pkt+7, server_id); PUT_32BIT(pkt+11, server_currwin); PUT_32BIT(pkt+15, server_maxpkt); PUT_32BIT(pkt+19, strlen(peer_addr)); memcpy(pkt+23, peer_addr, strlen(peer_addr)); PUT_32BIT(pkt+23+strlen(peer_addr), peer_port); send_packet_to_downstream(cs, SSH2_MSG_CHANNEL_OPEN, pkt, pktlen, NULL); sfree(pkt); /* * If this was a once-only X forwarding, clean it up now. */ if (chan->x11_one_shot) { ssh_sharing_remove_x11_display(cs->parent->ssh, chan->x11_auth_upstream); chan->x11_auth_upstream = NULL; sfree(chan->x11_auth_data); chan->x11_auth_proto = -1; chan->x11_auth_datalen = 0; chan->x11_one_shot = 0; } } void share_got_pkt_from_server(void *csv, int type, unsigned char *pkt, int pktlen) { struct ssh_sharing_connstate *cs = (struct ssh_sharing_connstate *)csv; struct share_globreq *globreq; int id_pos; unsigned upstream_id, server_id; struct share_channel *chan; struct share_xchannel *xc; switch (type) { case SSH2_MSG_REQUEST_SUCCESS: case SSH2_MSG_REQUEST_FAILURE: globreq = cs->globreq_head; if (globreq->type == GLOBREQ_TCPIP_FORWARD) { if (type == SSH2_MSG_REQUEST_FAILURE) { share_remove_forwarding(cs, globreq->fwd); } else { globreq->fwd->active = TRUE; } } else if (globreq->type == GLOBREQ_CANCEL_TCPIP_FORWARD) { if (type == SSH2_MSG_REQUEST_SUCCESS) { share_remove_forwarding(cs, globreq->fwd); } } if (globreq->want_reply) { send_packet_to_downstream(cs, type, pkt, pktlen, NULL); } cs->globreq_head = globreq->next; sfree(globreq); if (cs->globreq_head == NULL) cs->globreq_tail = NULL; if (!cs->sock) { /* Retry cleaning up this connection, in case that reply * was the last thing we were waiting for. */ share_try_cleanup(cs); } break; case SSH2_MSG_CHANNEL_OPEN: id_pos = getstring_size(pkt, pktlen); assert(id_pos >= 0); server_id = GET_32BIT(pkt + id_pos); share_add_halfchannel(cs, server_id); send_packet_to_downstream(cs, type, pkt, pktlen, NULL); break; case SSH2_MSG_CHANNEL_OPEN_CONFIRMATION: case SSH2_MSG_CHANNEL_OPEN_FAILURE: case SSH2_MSG_CHANNEL_CLOSE: case SSH2_MSG_CHANNEL_WINDOW_ADJUST: case SSH2_MSG_CHANNEL_DATA: case SSH2_MSG_CHANNEL_EXTENDED_DATA: case SSH2_MSG_CHANNEL_EOF: case SSH2_MSG_CHANNEL_REQUEST: case SSH2_MSG_CHANNEL_SUCCESS: case SSH2_MSG_CHANNEL_FAILURE: /* * All these messages have the recipient channel id as the * first uint32 field in the packet. Substitute the downstream * channel id for our one and pass the packet downstream. */ assert(pktlen >= 4); upstream_id = GET_32BIT(pkt); if ((chan = share_find_channel_by_upstream(cs, upstream_id)) != NULL) { /* * The normal case: this id refers to an open channel. */ PUT_32BIT(pkt, chan->downstream_id); send_packet_to_downstream(cs, type, pkt, pktlen, chan); /* * Update the channel state, for messages that need it. */ if (type == SSH2_MSG_CHANNEL_OPEN_CONFIRMATION) { if (chan->state == UNACKNOWLEDGED && pktlen >= 8) { share_channel_set_server_id(cs, chan, GET_32BIT(pkt+4), OPEN); if (!cs->sock) { /* Retry cleaning up this connection, so that we * can send an immediate CLOSE on this channel for * which we now know the server id. */ share_try_cleanup(cs); } } } else if (type == SSH2_MSG_CHANNEL_OPEN_FAILURE) { ssh_delete_sharing_channel(cs->parent->ssh, chan->upstream_id); share_remove_channel(cs, chan); } else if (type == SSH2_MSG_CHANNEL_CLOSE) { if (chan->state == SENT_CLOSE) { ssh_delete_sharing_channel(cs->parent->ssh, chan->upstream_id); share_remove_channel(cs, chan); if (!cs->sock) { /* Retry cleaning up this connection, in case this * channel closure was the last thing we were * waiting for. */ share_try_cleanup(cs); } } else { chan->state = RCVD_CLOSE; } } } else if ((xc = share_find_xchannel_by_upstream(cs, upstream_id)) != NULL) { /* * The unusual case: this id refers to an xchannel. Add it * to the xchannel's queue. */ struct share_xchannel_message *msg; msg = share_xchannel_add_message(xc, type, pktlen); memcpy(msg->data, pkt, pktlen); /* If the xchannel is dead, then also respond to it (which * may involve deleting the channel). */ if (!xc->live) share_dead_xchannel_respond(cs, xc); } break; default: assert(!"This packet type should never have come from ssh.c"); break; } } static void share_got_pkt_from_downstream(struct ssh_sharing_connstate *cs, int type, unsigned char *pkt, int pktlen) { char *request_name; struct share_forwarding *fwd; int id_pos; unsigned old_id, new_id, server_id; struct share_globreq *globreq; struct share_channel *chan; struct share_halfchannel *hc; struct share_xchannel *xc; char *err = NULL; switch (type) { case SSH2_MSG_DISCONNECT: /* * This message stops here: if downstream is disconnecting * from us, that doesn't mean we want to disconnect from the * SSH server. Close the downstream connection and start * cleanup. */ share_begin_cleanup(cs); break; case SSH2_MSG_GLOBAL_REQUEST: /* * The only global requests we understand are "tcpip-forward" * and "cancel-tcpip-forward". Since those require us to * maintain state, we must assume that other global requests * will probably require that too, and so we don't forward on * any request we don't understand. */ request_name = getstring(pkt, pktlen); if (request_name == NULL) { err = dupprintf("Truncated GLOBAL_REQUEST packet"); goto confused; } if (!strcmp(request_name, "tcpip-forward")) { int wantreplypos, orig_wantreply, port, ret; char *host; sfree(request_name); /* * Pick the packet apart to find the want_reply field and * the host/port we're going to ask to listen on. */ wantreplypos = getstring_size(pkt, pktlen); if (wantreplypos < 0 || wantreplypos >= pktlen) { err = dupprintf("Truncated GLOBAL_REQUEST packet"); goto confused; } orig_wantreply = pkt[wantreplypos]; port = getstring_size(pkt + (wantreplypos + 1), pktlen - (wantreplypos + 1)); port += (wantreplypos + 1); if (port < 0 || port > pktlen - 4) { err = dupprintf("Truncated GLOBAL_REQUEST packet"); goto confused; } host = getstring(pkt + (wantreplypos + 1), pktlen - (wantreplypos + 1)); assert(host != NULL); port = GET_32BIT(pkt + port); /* * See if we can allocate space in ssh.c's tree of remote * port forwardings. If we can't, it's because another * client sharing this connection has already allocated * the identical port forwarding, so we take it on * ourselves to manufacture a failure packet and send it * back to downstream. */ ret = ssh_alloc_sharing_rportfwd(cs->parent->ssh, host, port, cs); if (!ret) { if (orig_wantreply) { send_packet_to_downstream(cs, SSH2_MSG_REQUEST_FAILURE, "", 0, NULL); } } else { /* * We've managed to make space for this forwarding * locally. Pass the request on to the SSH server, but * set want_reply even if it wasn't originally set, so * that we know whether this forwarding needs to be * cleaned up if downstream goes away. */ int old_wantreply = pkt[wantreplypos]; pkt[wantreplypos] = 1; ssh_send_packet_from_downstream (cs->parent->ssh, cs->id, type, pkt, pktlen, old_wantreply ? NULL : "upstream added want_reply flag"); fwd = share_add_forwarding(cs, host, port); ssh_sharing_queue_global_request(cs->parent->ssh, cs); if (fwd) { globreq = snew(struct share_globreq); globreq->next = NULL; if (cs->globreq_tail) cs->globreq_tail->next = globreq; else cs->globreq_head = globreq; globreq->fwd = fwd; globreq->want_reply = orig_wantreply; globreq->type = GLOBREQ_TCPIP_FORWARD; } } sfree(host); } else if (!strcmp(request_name, "cancel-tcpip-forward")) { int wantreplypos, orig_wantreply, port; char *host; struct share_forwarding *fwd; sfree(request_name); /* * Pick the packet apart to find the want_reply field and * the host/port we're going to ask to listen on. */ wantreplypos = getstring_size(pkt, pktlen); if (wantreplypos < 0 || wantreplypos >= pktlen) { err = dupprintf("Truncated GLOBAL_REQUEST packet"); goto confused; } orig_wantreply = pkt[wantreplypos]; port = getstring_size(pkt + (wantreplypos + 1), pktlen - (wantreplypos + 1)); port += (wantreplypos + 1); if (port < 0 || port > pktlen - 4) { err = dupprintf("Truncated GLOBAL_REQUEST packet"); goto confused; } host = getstring(pkt + (wantreplypos + 1), pktlen - (wantreplypos + 1)); assert(host != NULL); port = GET_32BIT(pkt + port); /* * Look up the existing forwarding with these details. */ fwd = share_find_forwarding(cs, host, port); if (!fwd) { if (orig_wantreply) { send_packet_to_downstream(cs, SSH2_MSG_REQUEST_FAILURE, "", 0, NULL); } } else { /* * Pass the cancel request on to the SSH server, but * set want_reply even if it wasn't originally set, so * that _we_ know whether the forwarding has been * deleted even if downstream doesn't want to know. */ int old_wantreply = pkt[wantreplypos]; pkt[wantreplypos] = 1; ssh_send_packet_from_downstream (cs->parent->ssh, cs->id, type, pkt, pktlen, old_wantreply ? NULL : "upstream added want_reply flag"); ssh_sharing_queue_global_request(cs->parent->ssh, cs); } sfree(host); } else { /* * Request we don't understand. Manufacture a failure * message if an answer was required. */ int wantreplypos; sfree(request_name); wantreplypos = getstring_size(pkt, pktlen); if (wantreplypos < 0 || wantreplypos >= pktlen) { err = dupprintf("Truncated GLOBAL_REQUEST packet"); goto confused; } if (pkt[wantreplypos]) send_packet_to_downstream(cs, SSH2_MSG_REQUEST_FAILURE, "", 0, NULL); } break; case SSH2_MSG_CHANNEL_OPEN: /* Sender channel id comes after the channel type string */ id_pos = getstring_size(pkt, pktlen); if (id_pos < 0 || id_pos > pktlen - 12) { err = dupprintf("Truncated CHANNEL_OPEN packet"); goto confused; } old_id = GET_32BIT(pkt + id_pos); new_id = ssh_alloc_sharing_channel(cs->parent->ssh, cs); share_add_channel(cs, old_id, new_id, 0, UNACKNOWLEDGED, GET_32BIT(pkt + id_pos + 8)); PUT_32BIT(pkt + id_pos, new_id); ssh_send_packet_from_downstream(cs->parent->ssh, cs->id, type, pkt, pktlen, NULL); break; case SSH2_MSG_CHANNEL_OPEN_CONFIRMATION: if (pktlen < 16) { err = dupprintf("Truncated CHANNEL_OPEN_CONFIRMATION packet"); goto confused; } id_pos = 4; /* sender channel id is 2nd uint32 field in packet */ old_id = GET_32BIT(pkt + id_pos); server_id = GET_32BIT(pkt); /* This server id may refer to either a halfchannel or an xchannel. */ hc = NULL, xc = NULL; /* placate optimiser */ if ((hc = share_find_halfchannel(cs, server_id)) != NULL) { new_id = ssh_alloc_sharing_channel(cs->parent->ssh, cs); } else if ((xc = share_find_xchannel_by_server(cs, server_id)) != NULL) { new_id = xc->upstream_id; } else { err = dupprintf("CHANNEL_OPEN_CONFIRMATION packet cited unknown channel %u", (unsigned)server_id); goto confused; } PUT_32BIT(pkt + id_pos, new_id); chan = share_add_channel(cs, old_id, new_id, server_id, OPEN, GET_32BIT(pkt + 12)); if (hc) { ssh_send_packet_from_downstream(cs->parent->ssh, cs->id, type, pkt, pktlen, NULL); share_remove_halfchannel(cs, hc); } else if (xc) { unsigned downstream_window = GET_32BIT(pkt + 8); if (downstream_window < 256) { err = dupprintf("Initial window size for x11 channel must be at least 256 (got %u)", downstream_window); goto confused; } share_xchannel_confirmation(cs, xc, chan, downstream_window); share_remove_xchannel(cs, xc); } break; case SSH2_MSG_CHANNEL_OPEN_FAILURE: if (pktlen < 4) { err = dupprintf("Truncated CHANNEL_OPEN_FAILURE packet"); goto confused; } server_id = GET_32BIT(pkt); /* This server id may refer to either a halfchannel or an xchannel. */ if ((hc = share_find_halfchannel(cs, server_id)) != NULL) { ssh_send_packet_from_downstream(cs->parent->ssh, cs->id, type, pkt, pktlen, NULL); share_remove_halfchannel(cs, hc); } else if ((xc = share_find_xchannel_by_server(cs, server_id)) != NULL) { share_xchannel_failure(cs, xc); } else { err = dupprintf("CHANNEL_OPEN_FAILURE packet cited unknown channel %u", (unsigned)server_id); goto confused; } break; case SSH2_MSG_CHANNEL_WINDOW_ADJUST: case SSH2_MSG_CHANNEL_DATA: case SSH2_MSG_CHANNEL_EXTENDED_DATA: case SSH2_MSG_CHANNEL_EOF: case SSH2_MSG_CHANNEL_CLOSE: case SSH2_MSG_CHANNEL_REQUEST: case SSH2_MSG_CHANNEL_SUCCESS: case SSH2_MSG_CHANNEL_FAILURE: case SSH2_MSG_IGNORE: case SSH2_MSG_DEBUG: if (type == SSH2_MSG_CHANNEL_REQUEST && (request_name = getstring(pkt + 4, pktlen - 4)) != NULL) { /* * Agent forwarding requests from downstream are treated * specially. Because OpenSSHD doesn't let us enable agent * forwarding independently per session channel, and in * particular because the OpenSSH-defined agent forwarding * protocol does not mark agent-channel requests with the * id of the session channel they originate from, the only * way we can implement agent forwarding in a * connection-shared PuTTY is to forward the _upstream_ * agent. Hence, we unilaterally deny agent forwarding * requests from downstreams if we aren't prepared to * forward an agent ourselves. * * (If we are, then we dutifully pass agent forwarding * requests upstream. OpenSSHD has the curious behaviour * that all but the first such request will be rejected, * but all session channels opened after the first request * get agent forwarding enabled whether they ask for it or * not; but that's not our concern, since other SSH * servers supporting the same piece of protocol might in * principle at least manage to enable agent forwarding on * precisely the channels that requested it, even if the * subsequent CHANNEL_OPENs still can't be associated with * a parent session channel.) */ if (!strcmp(request_name, "auth-agent-req@openssh.com") && !ssh_agent_forwarding_permitted(cs->parent->ssh)) { unsigned server_id = GET_32BIT(pkt); unsigned char recipient_id[4]; sfree(request_name); chan = share_find_channel_by_server(cs, server_id); if (chan) { PUT_32BIT(recipient_id, chan->downstream_id); send_packet_to_downstream(cs, SSH2_MSG_CHANNEL_FAILURE, recipient_id, 4, NULL); } else { char *buf = dupprintf("Agent forwarding request for " "unrecognised channel %u", server_id); share_disconnect(cs, buf); sfree(buf); return; } break; } /* * Another thing we treat specially is X11 forwarding * requests. For these, we have to make up another set of * X11 auth data, and enter it into our SSH connection's * list of possible X11 authorisation credentials so that * when we see an X11 channel open request we can know * whether it's one to handle locally or one to pass on to * a downstream, and if the latter, which one. */ if (!strcmp(request_name, "x11-req")) { unsigned server_id = GET_32BIT(pkt); int want_reply, single_connection, screen; char *auth_proto_str, *auth_data; int auth_proto, protolen, datalen; int pos; sfree(request_name); chan = share_find_channel_by_server(cs, server_id); if (!chan) { char *buf = dupprintf("X11 forwarding request for " "unrecognised channel %u", server_id); share_disconnect(cs, buf); sfree(buf); return; } /* * Pick apart the whole message to find the downstream * auth details. */ /* we have already seen: 4 bytes channel id, 4+7 request name */ if (pktlen < 17) { err = dupprintf("Truncated CHANNEL_REQUEST(\"x11\") packet"); goto confused; } want_reply = pkt[15] != 0; single_connection = pkt[16] != 0; auth_proto_str = getstring(pkt+17, pktlen-17); auth_proto = x11_identify_auth_proto(auth_proto_str); sfree(auth_proto_str); pos = 17 + getstring_size(pkt+17, pktlen-17); auth_data = getstring(pkt+pos, pktlen-pos); pos += getstring_size(pkt+pos, pktlen-pos); if (pktlen < pos+4) { err = dupprintf("Truncated CHANNEL_REQUEST(\"x11\") packet"); sfree(auth_data); goto confused; } screen = GET_32BIT(pkt+pos); if (auth_proto < 0) { /* Reject due to not understanding downstream's * requested authorisation method. */ unsigned char recipient_id[4]; PUT_32BIT(recipient_id, chan->downstream_id); send_packet_to_downstream(cs, SSH2_MSG_CHANNEL_FAILURE, recipient_id, 4, NULL); sfree(auth_data); break; } chan->x11_auth_proto = auth_proto; chan->x11_auth_data = x11_dehexify(auth_data, &chan->x11_auth_datalen); sfree(auth_data); chan->x11_auth_upstream = ssh_sharing_add_x11_display(cs->parent->ssh, auth_proto, cs, chan); chan->x11_one_shot = single_connection; /* * Now construct a replacement X forwarding request, * containing our own auth data, and send that to the * server. */ protolen = strlen(chan->x11_auth_upstream->protoname); datalen = strlen(chan->x11_auth_upstream->datastring); pktlen = 29+protolen+datalen; pkt = snewn(pktlen, unsigned char); PUT_32BIT(pkt, server_id); PUT_32BIT(pkt+4, 7); /* strlen("x11-req") */ memcpy(pkt+8, "x11-req", 7); pkt[15] = want_reply; pkt[16] = single_connection; PUT_32BIT(pkt+17, protolen); memcpy(pkt+21, chan->x11_auth_upstream->protoname, protolen); PUT_32BIT(pkt+21+protolen, datalen); memcpy(pkt+25+protolen, chan->x11_auth_upstream->datastring, datalen); PUT_32BIT(pkt+25+protolen+datalen, screen); ssh_send_packet_from_downstream(cs->parent->ssh, cs->id, SSH2_MSG_CHANNEL_REQUEST, pkt, pktlen, NULL); sfree(pkt); break; } sfree(request_name); } ssh_send_packet_from_downstream(cs->parent->ssh, cs->id, type, pkt, pktlen, NULL); if (type == SSH2_MSG_CHANNEL_CLOSE && pktlen >= 4) { server_id = GET_32BIT(pkt); chan = share_find_channel_by_server(cs, server_id); if (chan) { if (chan->state == RCVD_CLOSE) { ssh_delete_sharing_channel(cs->parent->ssh, chan->upstream_id); share_remove_channel(cs, chan); } else { chan->state = SENT_CLOSE; } } } break; default: err = dupprintf("Unexpected packet type %d\n", type); goto confused; /* * Any other packet type is unexpected. In particular, we * never pass GLOBAL_REQUESTs downstream, so we never expect * to see SSH2_MSG_REQUEST_{SUCCESS,FAILURE}. */ confused: assert(err != NULL); share_disconnect(cs, err); sfree(err); break; } } /* * Coroutine macros similar to, but simplified from, those in ssh.c. */ #define crBegin(v) { int *crLine = &v; switch(v) { case 0:; #define crFinishV } *crLine = 0; return; } #define crGetChar(c) do \ { \ while (len == 0) { \ *crLine =__LINE__; return; case __LINE__:; \ } \ len--; \ (c) = (unsigned char)*data++; \ } while (0) static void share_receive(Plug plug, int urgent, char *data, int len) { struct ssh_sharing_connstate *cs = (struct ssh_sharing_connstate *)plug; static const char expected_verstring_prefix[] = "SSHCONNECTION@putty.projects.tartarus.org-2.0-"; unsigned char c; crBegin(cs->crLine); /* * First read the version string from downstream. */ cs->recvlen = 0; while (1) { crGetChar(c); if (c == '\012') break; if (cs->recvlen >= sizeof(cs->recvbuf)) { char *buf = dupprintf("Version string far too long\n"); share_disconnect(cs, buf); sfree(buf); goto dead; } cs->recvbuf[cs->recvlen++] = c; } /* * Now parse the version string to make sure it's at least vaguely * sensible, and log it. */ if (cs->recvlen < sizeof(expected_verstring_prefix)-1 || memcmp(cs->recvbuf, expected_verstring_prefix, sizeof(expected_verstring_prefix) - 1)) { char *buf = dupprintf("Version string did not have expected prefix\n"); share_disconnect(cs, buf); sfree(buf); goto dead; } if (cs->recvlen > 0 && cs->recvbuf[cs->recvlen-1] == '\015') cs->recvlen--; /* trim off \r before \n */ ssh_sharing_logf(cs->parent->ssh, cs->id, "Downstream version string: %.*s", cs->recvlen, cs->recvbuf); cs->got_verstring = TRUE; /* * Loop round reading packets. */ while (1) { cs->recvlen = 0; while (cs->recvlen < 4) { crGetChar(c); cs->recvbuf[cs->recvlen++] = c; } cs->curr_packetlen = toint(GET_32BIT(cs->recvbuf) + 4); if (cs->curr_packetlen < 5 || cs->curr_packetlen > sizeof(cs->recvbuf)) { char *buf = dupprintf("Bad packet length %u\n", (unsigned)cs->curr_packetlen); share_disconnect(cs, buf); sfree(buf); goto dead; } while (cs->recvlen < cs->curr_packetlen) { crGetChar(c); cs->recvbuf[cs->recvlen++] = c; } share_got_pkt_from_downstream(cs, cs->recvbuf[4], cs->recvbuf + 5, cs->recvlen - 5); } dead:; crFinishV; } static void share_sent(Plug plug, int bufsize) { /* struct ssh_sharing_connstate *cs = (struct ssh_sharing_connstate *)plug; */ /* * We do nothing here, because we expect that there won't be a * need to throttle and unthrottle the connection to a downstream. * It should automatically throttle itself: if the SSH server * sends huge amounts of data on all channels then it'll run out * of window until our downstream sends it back some * WINDOW_ADJUSTs. */ } static void share_listen_closing(Plug plug, const char *error_msg, int error_code, int calling_back) { struct ssh_sharing_state *sharestate = (struct ssh_sharing_state *)plug; if (error_msg) ssh_sharing_logf(sharestate->ssh, 0, "listening socket: %s", error_msg); sk_close(sharestate->listensock); sharestate->listensock = NULL; } static void share_send_verstring(struct ssh_sharing_connstate *cs) { char *fullstring = dupcat("SSHCONNECTION@putty.projects.tartarus.org-2.0-", cs->parent->server_verstring, "\015\012", NULL); sk_write(cs->sock, fullstring, strlen(fullstring)); sfree(fullstring); cs->sent_verstring = TRUE; } int share_ndownstreams(void *state) { struct ssh_sharing_state *sharestate = (struct ssh_sharing_state *)state; return count234(sharestate->connections); } void share_activate(void *state, const char *server_verstring) { /* * Indication from ssh.c that we are now ready to begin serving * any downstreams that have already connected to us. */ struct ssh_sharing_state *sharestate = (struct ssh_sharing_state *)state; struct ssh_sharing_connstate *cs; int i; /* * Trim the server's version string down to just the software * version component, removing "SSH-2.0-" or whatever at the * front. */ for (i = 0; i < 2; i++) { server_verstring += strcspn(server_verstring, "-"); if (*server_verstring) server_verstring++; } sharestate->server_verstring = dupstr(server_verstring); for (i = 0; (cs = (struct ssh_sharing_connstate *) index234(sharestate->connections, i)) != NULL; i++) { assert(!cs->sent_verstring); share_send_verstring(cs); } } static int share_listen_accepting(Plug plug, accept_fn_t constructor, accept_ctx_t ctx) { static const struct plug_function_table connection_fn_table = { NULL, /* no log function, because that's for outgoing connections */ share_closing, share_receive, share_sent, NULL /* no accepting function, because we've already done it */ }; struct ssh_sharing_state *sharestate = (struct ssh_sharing_state *)plug; struct ssh_sharing_connstate *cs; const char *err; char *peerinfo; /* * A new downstream has connected to us. */ cs = snew(struct ssh_sharing_connstate); cs->fn = &connection_fn_table; cs->parent = sharestate; if ((cs->id = share_find_unused_id(sharestate, sharestate->nextid)) == 0 && (cs->id = share_find_unused_id(sharestate, 1)) == 0) { sfree(cs); return 1; } sharestate->nextid = cs->id + 1; if (sharestate->nextid == 0) sharestate->nextid++; /* only happens in VERY long-running upstreams */ cs->sock = constructor(ctx, (Plug) cs); if ((err = sk_socket_error(cs->sock)) != NULL) { sfree(cs); return err != NULL; } sk_set_frozen(cs->sock, 0); add234(cs->parent->connections, cs); cs->sent_verstring = FALSE; if (sharestate->server_verstring) share_send_verstring(cs); cs->got_verstring = FALSE; cs->recvlen = 0; cs->crLine = 0; cs->halfchannels = newtree234(share_halfchannel_cmp); cs->channels_by_us = newtree234(share_channel_us_cmp); cs->channels_by_server = newtree234(share_channel_server_cmp); cs->xchannels_by_us = newtree234(share_xchannel_us_cmp); cs->xchannels_by_server = newtree234(share_xchannel_server_cmp); cs->forwardings = newtree234(share_forwarding_cmp); cs->globreq_head = cs->globreq_tail = NULL; peerinfo = sk_peer_info(cs->sock); ssh_sharing_downstream_connected(sharestate->ssh, cs->id, peerinfo); sfree(peerinfo); return 0; } /* Per-application overrides for what roles we can take (e.g. pscp * will never be an upstream) */ extern const int share_can_be_downstream; extern const int share_can_be_upstream; /* * Decide on the string used to identify the connection point between * upstream and downstream (be it a Windows named pipe or a * Unix-domain socket or whatever else). * * I wondered about making this a SHA hash of all sorts of pieces of * the PuTTY configuration - essentially everything PuTTY uses to know * where and how to make a connection, including all the proxy details * (or rather, all the _relevant_ ones - only including settings that * other settings didn't prevent from having any effect), plus the * username. However, I think it's better to keep it really simple: * the connection point identifier is derived from the hostname and * port used to index the host-key cache (not necessarily where we * _physically_ connected to, in cases involving proxies or * CONF_loghost), plus the username if one is specified. * * The per-platform code will quite likely hash or obfuscate this name * in turn, for privacy from other users; failing that, it might * transform it to avoid dangerous filename characters and so on. But * that doesn't matter to us: for us, the point is that two session * configurations which return the same string from this function will * be treated as potentially shareable with each other. */ char *ssh_share_sockname(const char *host, int port, Conf *conf) { char *username = get_remote_username(conf); char *sockname; if (port == 22) { if (username) sockname = dupprintf("%s@%s", username, host); else sockname = dupprintf("%s", host); } else { if (username) sockname = dupprintf("%s@%s:%d", username, host, port); else sockname = dupprintf("%s:%d", host, port); } sfree(username); return sockname; } static void nullplug_socket_log(Plug plug, int type, SockAddr addr, int port, const char *error_msg, int error_code) {} static void nullplug_closing(Plug plug, const char *error_msg, int error_code, int calling_back) {} static void nullplug_receive(Plug plug, int urgent, char *data, int len) {} static void nullplug_sent(Plug plug, int bufsize) {} int ssh_share_test_for_upstream(const char *host, int port, Conf *conf) { static const struct plug_function_table fn_table = { nullplug_socket_log, nullplug_closing, nullplug_receive, nullplug_sent, NULL }; struct nullplug { const struct plug_function_table *fn; } np; char *sockname, *logtext, *ds_err, *us_err; int result; Socket sock; np.fn = &fn_table; sockname = ssh_share_sockname(host, port, conf); sock = NULL; logtext = ds_err = us_err = NULL; result = platform_ssh_share(sockname, conf, (Plug)&np, (Plug)NULL, &sock, &logtext, &ds_err, &us_err, FALSE, TRUE); sfree(logtext); sfree(ds_err); sfree(us_err); sfree(sockname); if (result == SHARE_NONE) { assert(sock == NULL); return FALSE; } else { assert(result == SHARE_DOWNSTREAM); sk_close(sock); return TRUE; } } /* * Init function for connection sharing. We either open a listening * socket and become an upstream, or connect to an existing one and * become a downstream, or do neither. We are responsible for deciding * which of these to do (including checking the Conf to see if * connection sharing is even enabled in the first place). If we * become a downstream, we return the Socket with which we connected * to the upstream; otherwise (whether or not we have established an * upstream) we return NULL. */ Socket ssh_connection_sharing_init(const char *host, int port, Conf *conf, Ssh ssh, void **state) { static const struct plug_function_table listen_fn_table = { NULL, /* no log function, because that's for outgoing connections */ share_listen_closing, NULL, /* no receive function on a listening socket */ NULL, /* no sent function on a listening socket */ share_listen_accepting }; int result, can_upstream, can_downstream; char *logtext, *ds_err, *us_err; char *sockname; Socket sock; struct ssh_sharing_state *sharestate; if (!conf_get_int(conf, CONF_ssh_connection_sharing)) return NULL; /* do not share anything */ can_upstream = share_can_be_upstream && conf_get_int(conf, CONF_ssh_connection_sharing_upstream); can_downstream = share_can_be_downstream && conf_get_int(conf, CONF_ssh_connection_sharing_downstream); if (!can_upstream && !can_downstream) return NULL; sockname = ssh_share_sockname(host, port, conf); /* * Create a data structure for the listening plug if we turn out * to be an upstream. */ sharestate = snew(struct ssh_sharing_state); sharestate->fn = &listen_fn_table; sharestate->listensock = NULL; /* * Now hand off to a per-platform routine that either connects to * an existing upstream (using 'ssh' as the plug), establishes our * own upstream (using 'sharestate' as the plug), or forks off a * separate upstream and then connects to that. It will return a * code telling us which kind of socket it put in 'sock'. */ sock = NULL; logtext = ds_err = us_err = NULL; result = platform_ssh_share(sockname, conf, (Plug)ssh, (Plug)sharestate, &sock, &logtext, &ds_err, &us_err, can_upstream, can_downstream); ssh_connshare_log(ssh, result, logtext, ds_err, us_err); sfree(logtext); sfree(ds_err); sfree(us_err); switch (result) { case SHARE_NONE: /* * We aren't sharing our connection at all (e.g. something * went wrong setting the socket up). Free the upstream * structure and return NULL. */ assert(sock == NULL); *state = NULL; sfree(sharestate); sfree(sockname); return NULL; case SHARE_DOWNSTREAM: /* * We are downstream, so free sharestate which it turns out we * don't need after all, and return the downstream socket as a * replacement for an ordinary SSH connection. */ *state = NULL; sfree(sharestate); sfree(sockname); return sock; case SHARE_UPSTREAM: /* * We are upstream. Set up sharestate properly and pass a copy * to the caller; return NULL, to tell ssh.c that it has to * make an ordinary connection after all. */ *state = sharestate; sharestate->listensock = sock; sharestate->connections = newtree234(share_connstate_cmp); sharestate->ssh = ssh; sharestate->server_verstring = NULL; sharestate->sockname = sockname; sharestate->nextid = 1; return NULL; } return NULL; }