Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// This part of YJIT helps interfacing with the rest of CRuby and with the OS.
|
|
|
|
// Sometimes our FFI binding generation tool gives undesirable outputs when it
|
|
|
|
// sees C features that Rust doesn't support well. We mitigate that by binding
|
|
|
|
// functions which have simple parameter types. The boilerplate C functions for
|
|
|
|
// that purpose are in this file.
|
|
|
|
// Similarly, we wrap OS facilities we need in simple functions to help with
|
|
|
|
// FFI and to avoid the need to use external crates.io Rust libraries.
|
|
|
|
|
2021-10-02 01:38:39 +03:00
|
|
|
#include "internal.h"
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
#include "internal/sanitizers.h"
|
|
|
|
#include "internal/string.h"
|
|
|
|
#include "internal/hash.h"
|
|
|
|
#include "internal/variable.h"
|
|
|
|
#include "internal/compile.h"
|
|
|
|
#include "internal/class.h"
|
2022-06-30 17:26:46 +03:00
|
|
|
#include "internal/fixnum.h"
|
2023-04-05 23:19:31 +03:00
|
|
|
#include "internal/numeric.h"
|
2023-02-08 14:56:53 +03:00
|
|
|
#include "internal/gc.h"
|
2021-10-02 01:38:39 +03:00
|
|
|
#include "vm_core.h"
|
|
|
|
#include "vm_callinfo.h"
|
|
|
|
#include "builtin.h"
|
|
|
|
#include "insns.inc"
|
|
|
|
#include "insns_info.inc"
|
|
|
|
#include "vm_sync.h"
|
|
|
|
#include "yjit.h"
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
#include "vm_insnhelper.h"
|
|
|
|
#include "probes.h"
|
|
|
|
#include "probes_helper.h"
|
|
|
|
#include "iseq.h"
|
Add ability to trace exit locations in yjit (#5970)
When running with `--yjit-stats` turned on, yjit can inform the user
what the most common exits are. While this is useful information it
doesn't tell you the source location of the code that exited or what the
code that exited looks like. This change intends to fix that.
To use the feature, run yjit with the `--yjit-trace-exits` option,
which will record the backtrace for every exit that occurs. This functionality
requires the stats feature to be turned on. Calling `--yjit-trace-exits`
will automatically set the `--yjit-stats` option.
Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will
Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file
based on the passed filename.
*Example usage:*
Given the following script, we write to a file called
`concat_array.dump` the results of `RubyVM::YJIT.exit_locations`.
```ruby
def concat_array
["t", "r", *x = "u", "e"].join
end
1000.times do
concat_array
end
RubyVM::YJIT.dump_exit_locations("concat_array.dump")
```
When we run the file with this branch and the appropriate flags the
stacktrace will be recorded. Note Stackprof needs to be installed or you
need to point to the library directly.
```
./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb
```
We can then read the dump file with Stackprof:
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump
```
Results will look similar to the following:
```
==================================
Mode: ()
Samples: 1817 (0.00% miss rate)
GC: 0 (0.00%)
==================================
TOTAL (pct) SAMPLES (pct) FRAME
1001 (55.1%) 1001 (55.1%) concatarray
335 (18.4%) 335 (18.4%) invokeblock
178 (9.8%) 178 (9.8%) send
140 (7.7%) 140 (7.7%) opt_getinlinecache
...etc...
```
Simply inspecting the `concatarray` method will give `SOURCE
UNAVAILABLE` because the source is insns.def.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray
```
Result:
```
concatarray (nonexistent.def:1)
samples: 1001 self (55.1%) / 1001 total (55.1%)
callers:
1000 ( 99.9%) Object#concat_array
1 ( 0.1%) Gem.suffixes
callees (0 total):
code:
SOURCE UNAVAILABLE
```
However if we go deeper to the callee we can see the exact
source of the `concatarray` exit.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array
```
```
Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1)
samples: 0 self (0.0%) / 1000 total (55.0%)
callers:
1000 ( 100.0%) block in <main>
callees (1000 total):
1000 ( 100.0%) concatarray
code:
| 1 | def concat_array
1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join
| 3 | end
```
The `--walk` option is recommended for this feature as it make it
easier to traverse the tree of exits.
*Goals of this feature:*
This feature is meant to give more information when working on YJIT.
The idea is that if we know what code is exiting we can decide what
areas to prioritize when fixing exits. In some cases this means adding
prioritizing avoiding certain exits in yjit. In more complex cases it
might mean changing the Ruby code to be more performant when run with
yjit. Ultimately the more information we have about what code is exiting
AND why, the better we can make yjit.
*Known limitations:*
* Due to tracing exits, running this on large codebases like Rails
can be quite slow.
* On complex methods it can still be difficult to pinpoint the exact cause of
an exit.
* Stackprof is a requirement to to view the backtrace information from
the dump file.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 19:59:39 +03:00
|
|
|
#include "ruby/debug.h"
|
2022-10-25 19:07:10 +03:00
|
|
|
#include "internal/cont.h"
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
|
|
|
|
// For mmapp(), sysconf()
|
|
|
|
#ifndef _WIN32
|
|
|
|
#include <unistd.h>
|
|
|
|
#include <sys/mman.h>
|
2021-10-06 23:34:16 +03:00
|
|
|
#endif
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
#include <errno.h>
|
|
|
|
|
2023-08-02 17:15:29 +03:00
|
|
|
// Field offsets for the RObject struct
|
|
|
|
enum robject_offsets {
|
|
|
|
ROBJECT_OFFSET_AS_HEAP_IVPTR = offsetof(struct RObject, as.heap.ivptr),
|
|
|
|
ROBJECT_OFFSET_AS_HEAP_IV_INDEX_TBL = offsetof(struct RObject, as.heap.iv_index_tbl),
|
|
|
|
ROBJECT_OFFSET_AS_ARY = offsetof(struct RObject, as.ary),
|
|
|
|
};
|
|
|
|
|
2023-01-18 23:41:28 +03:00
|
|
|
// Field offsets for the RString struct
|
|
|
|
enum rstring_offsets {
|
2023-06-06 17:19:20 +03:00
|
|
|
RUBY_OFFSET_RSTRING_LEN = offsetof(struct RString, len)
|
2023-01-18 23:41:28 +03:00
|
|
|
};
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// We need size_t to have a known size to simplify code generation and FFI.
|
|
|
|
// TODO(alan): check this in configure.ac to fail fast on 32 bit platforms.
|
|
|
|
STATIC_ASSERT(64b_size_t, SIZE_MAX == UINT64_MAX);
|
|
|
|
// I don't know any C implementation that has uint64_t and puts padding bits
|
|
|
|
// into size_t but the standard seems to allow it.
|
|
|
|
STATIC_ASSERT(size_t_no_padding_bits, sizeof(size_t) == sizeof(uint64_t));
|
|
|
|
|
2022-05-02 19:51:40 +03:00
|
|
|
// This build config impacts the pointer tagging scheme and we only want to
|
|
|
|
// support one scheme for simplicity.
|
|
|
|
STATIC_ASSERT(pointer_tagging_scheme, USE_FLONUM);
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// NOTE: We can trust that uint8_t has no "padding bits" since the C spec
|
|
|
|
// guarantees it. Wording about padding bits is more explicit in C11 compared
|
|
|
|
// to C99. See C11 7.20.1.1p2. All this is to say we have _some_ standards backing to
|
|
|
|
// use a Rust `*mut u8` to represent a C `uint8_t *`.
|
|
|
|
//
|
|
|
|
// If we don't want to trust that we can interpreter the C standard correctly, we
|
|
|
|
// could outsource that work to the Rust standard library by sticking to fundamental
|
|
|
|
// types in C such as int, long, etc. and use `std::os::raw::c_long` and friends on
|
|
|
|
// the Rust side.
|
|
|
|
//
|
2022-06-18 01:12:55 +03:00
|
|
|
// What's up with the long prefix? Even though we build with `-fvisibility=hidden`
|
|
|
|
// we are sometimes a static library where the option doesn't prevent name collision.
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// The "_yjit_" part is for trying to be informative. We might want different
|
|
|
|
// suffixes for symbols meant for Rust and symbols meant for broader CRuby.
|
|
|
|
|
2022-06-14 17:23:13 +03:00
|
|
|
bool
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
rb_yjit_mark_writable(void *mem_block, uint32_t mem_size)
|
|
|
|
{
|
2022-10-25 19:07:10 +03:00
|
|
|
return mprotect(mem_block, mem_size, PROT_READ | PROT_WRITE) == 0;
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
rb_yjit_mark_executable(void *mem_block, uint32_t mem_size)
|
|
|
|
{
|
2022-10-17 19:26:36 +03:00
|
|
|
// Do not call mprotect when mem_size is zero. Some platforms may return
|
|
|
|
// an error for it. https://github.com/Shopify/ruby/issues/450
|
|
|
|
if (mem_size == 0) {
|
|
|
|
return;
|
|
|
|
}
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
if (mprotect(mem_block, mem_size, PROT_READ | PROT_EXEC)) {
|
2023-05-20 08:00:14 +03:00
|
|
|
rb_bug("Couldn't make JIT page (%p, %lu bytes) executable, errno: %s",
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
mem_block, (unsigned long)mem_size, strerror(errno));
|
|
|
|
}
|
2022-08-26 21:02:51 +03:00
|
|
|
}
|
2022-07-22 19:18:21 +03:00
|
|
|
|
2022-10-25 19:07:10 +03:00
|
|
|
// Free the specified memory block.
|
|
|
|
bool
|
|
|
|
rb_yjit_mark_unused(void *mem_block, uint32_t mem_size)
|
|
|
|
{
|
|
|
|
// On Linux, you need to use madvise MADV_DONTNEED to free memory.
|
|
|
|
// We might not need to call this on macOS, but it's not really documented.
|
|
|
|
// We generally prefer to do the same thing on both to ease testing too.
|
|
|
|
madvise(mem_block, mem_size, MADV_DONTNEED);
|
|
|
|
|
|
|
|
// On macOS, mprotect PROT_NONE seems to reduce RSS.
|
|
|
|
// We also call this on Linux to avoid executing unused pages.
|
|
|
|
return mprotect(mem_block, mem_size, PROT_NONE) == 0;
|
|
|
|
}
|
|
|
|
|
2023-02-01 00:18:56 +03:00
|
|
|
long
|
|
|
|
rb_yjit_array_len(VALUE a)
|
|
|
|
{
|
|
|
|
return rb_array_len(a);
|
|
|
|
}
|
|
|
|
|
2022-08-26 21:02:51 +03:00
|
|
|
// `start` is inclusive and `end` is exclusive.
|
|
|
|
void
|
|
|
|
rb_yjit_icache_invalidate(void *start, void *end)
|
|
|
|
{
|
2022-07-22 19:18:21 +03:00
|
|
|
// Clear/invalidate the instruction cache. Compiles to nothing on x86_64
|
2022-08-26 21:02:51 +03:00
|
|
|
// but required on ARM before running freshly written code.
|
|
|
|
// On Darwin it's the same as calling sys_icache_invalidate().
|
2022-07-22 19:21:19 +03:00
|
|
|
#ifdef __GNUC__
|
2022-08-26 21:02:51 +03:00
|
|
|
__builtin___clear_cache(start, end);
|
2022-09-15 17:14:27 +03:00
|
|
|
#elif defined(__aarch64__)
|
|
|
|
#error No instruction cache clear available with this compiler on Aarch64!
|
2022-07-22 19:21:19 +03:00
|
|
|
#endif
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
|
|
|
|
Add ability to trace exit locations in yjit (#5970)
When running with `--yjit-stats` turned on, yjit can inform the user
what the most common exits are. While this is useful information it
doesn't tell you the source location of the code that exited or what the
code that exited looks like. This change intends to fix that.
To use the feature, run yjit with the `--yjit-trace-exits` option,
which will record the backtrace for every exit that occurs. This functionality
requires the stats feature to be turned on. Calling `--yjit-trace-exits`
will automatically set the `--yjit-stats` option.
Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will
Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file
based on the passed filename.
*Example usage:*
Given the following script, we write to a file called
`concat_array.dump` the results of `RubyVM::YJIT.exit_locations`.
```ruby
def concat_array
["t", "r", *x = "u", "e"].join
end
1000.times do
concat_array
end
RubyVM::YJIT.dump_exit_locations("concat_array.dump")
```
When we run the file with this branch and the appropriate flags the
stacktrace will be recorded. Note Stackprof needs to be installed or you
need to point to the library directly.
```
./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb
```
We can then read the dump file with Stackprof:
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump
```
Results will look similar to the following:
```
==================================
Mode: ()
Samples: 1817 (0.00% miss rate)
GC: 0 (0.00%)
==================================
TOTAL (pct) SAMPLES (pct) FRAME
1001 (55.1%) 1001 (55.1%) concatarray
335 (18.4%) 335 (18.4%) invokeblock
178 (9.8%) 178 (9.8%) send
140 (7.7%) 140 (7.7%) opt_getinlinecache
...etc...
```
Simply inspecting the `concatarray` method will give `SOURCE
UNAVAILABLE` because the source is insns.def.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray
```
Result:
```
concatarray (nonexistent.def:1)
samples: 1001 self (55.1%) / 1001 total (55.1%)
callers:
1000 ( 99.9%) Object#concat_array
1 ( 0.1%) Gem.suffixes
callees (0 total):
code:
SOURCE UNAVAILABLE
```
However if we go deeper to the callee we can see the exact
source of the `concatarray` exit.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array
```
```
Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1)
samples: 0 self (0.0%) / 1000 total (55.0%)
callers:
1000 ( 100.0%) block in <main>
callees (1000 total):
1000 ( 100.0%) concatarray
code:
| 1 | def concat_array
1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join
| 3 | end
```
The `--walk` option is recommended for this feature as it make it
easier to traverse the tree of exits.
*Goals of this feature:*
This feature is meant to give more information when working on YJIT.
The idea is that if we know what code is exiting we can decide what
areas to prioritize when fixing exits. In some cases this means adding
prioritizing avoiding certain exits in yjit. In more complex cases it
might mean changing the Ruby code to be more performant when run with
yjit. Ultimately the more information we have about what code is exiting
AND why, the better we can make yjit.
*Known limitations:*
* Due to tracing exits, running this on large codebases like Rails
can be quite slow.
* On complex methods it can still be difficult to pinpoint the exact cause of
an exit.
* Stackprof is a requirement to to view the backtrace information from
the dump file.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 19:59:39 +03:00
|
|
|
# define PTR2NUM(x) (rb_int2inum((intptr_t)(void *)(x)))
|
|
|
|
|
|
|
|
// For a given raw_sample (frame), set the hash with the caller's
|
|
|
|
// name, file, and line number. Return the hash with collected frame_info.
|
|
|
|
static void
|
|
|
|
rb_yjit_add_frame(VALUE hash, VALUE frame)
|
|
|
|
{
|
|
|
|
VALUE frame_id = PTR2NUM(frame);
|
|
|
|
|
|
|
|
if (RTEST(rb_hash_aref(hash, frame_id))) {
|
|
|
|
return;
|
2022-07-27 12:42:27 +03:00
|
|
|
}
|
|
|
|
else {
|
Add ability to trace exit locations in yjit (#5970)
When running with `--yjit-stats` turned on, yjit can inform the user
what the most common exits are. While this is useful information it
doesn't tell you the source location of the code that exited or what the
code that exited looks like. This change intends to fix that.
To use the feature, run yjit with the `--yjit-trace-exits` option,
which will record the backtrace for every exit that occurs. This functionality
requires the stats feature to be turned on. Calling `--yjit-trace-exits`
will automatically set the `--yjit-stats` option.
Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will
Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file
based on the passed filename.
*Example usage:*
Given the following script, we write to a file called
`concat_array.dump` the results of `RubyVM::YJIT.exit_locations`.
```ruby
def concat_array
["t", "r", *x = "u", "e"].join
end
1000.times do
concat_array
end
RubyVM::YJIT.dump_exit_locations("concat_array.dump")
```
When we run the file with this branch and the appropriate flags the
stacktrace will be recorded. Note Stackprof needs to be installed or you
need to point to the library directly.
```
./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb
```
We can then read the dump file with Stackprof:
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump
```
Results will look similar to the following:
```
==================================
Mode: ()
Samples: 1817 (0.00% miss rate)
GC: 0 (0.00%)
==================================
TOTAL (pct) SAMPLES (pct) FRAME
1001 (55.1%) 1001 (55.1%) concatarray
335 (18.4%) 335 (18.4%) invokeblock
178 (9.8%) 178 (9.8%) send
140 (7.7%) 140 (7.7%) opt_getinlinecache
...etc...
```
Simply inspecting the `concatarray` method will give `SOURCE
UNAVAILABLE` because the source is insns.def.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray
```
Result:
```
concatarray (nonexistent.def:1)
samples: 1001 self (55.1%) / 1001 total (55.1%)
callers:
1000 ( 99.9%) Object#concat_array
1 ( 0.1%) Gem.suffixes
callees (0 total):
code:
SOURCE UNAVAILABLE
```
However if we go deeper to the callee we can see the exact
source of the `concatarray` exit.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array
```
```
Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1)
samples: 0 self (0.0%) / 1000 total (55.0%)
callers:
1000 ( 100.0%) block in <main>
callees (1000 total):
1000 ( 100.0%) concatarray
code:
| 1 | def concat_array
1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join
| 3 | end
```
The `--walk` option is recommended for this feature as it make it
easier to traverse the tree of exits.
*Goals of this feature:*
This feature is meant to give more information when working on YJIT.
The idea is that if we know what code is exiting we can decide what
areas to prioritize when fixing exits. In some cases this means adding
prioritizing avoiding certain exits in yjit. In more complex cases it
might mean changing the Ruby code to be more performant when run with
yjit. Ultimately the more information we have about what code is exiting
AND why, the better we can make yjit.
*Known limitations:*
* Due to tracing exits, running this on large codebases like Rails
can be quite slow.
* On complex methods it can still be difficult to pinpoint the exact cause of
an exit.
* Stackprof is a requirement to to view the backtrace information from
the dump file.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 19:59:39 +03:00
|
|
|
VALUE frame_info = rb_hash_new();
|
|
|
|
// Full label for the frame
|
|
|
|
VALUE name = rb_profile_frame_full_label(frame);
|
|
|
|
// Absolute path of the frame from rb_iseq_realpath
|
|
|
|
VALUE file = rb_profile_frame_absolute_path(frame);
|
|
|
|
// Line number of the frame
|
|
|
|
VALUE line = rb_profile_frame_first_lineno(frame);
|
|
|
|
|
|
|
|
// If absolute path isn't available use the rb_iseq_path
|
|
|
|
if (NIL_P(file)) {
|
|
|
|
file = rb_profile_frame_path(frame);
|
|
|
|
}
|
|
|
|
|
|
|
|
rb_hash_aset(frame_info, ID2SYM(rb_intern("name")), name);
|
|
|
|
rb_hash_aset(frame_info, ID2SYM(rb_intern("file")), file);
|
2022-07-12 23:40:49 +03:00
|
|
|
rb_hash_aset(frame_info, ID2SYM(rb_intern("samples")), INT2NUM(0));
|
|
|
|
rb_hash_aset(frame_info, ID2SYM(rb_intern("total_samples")), INT2NUM(0));
|
|
|
|
rb_hash_aset(frame_info, ID2SYM(rb_intern("edges")), rb_hash_new());
|
|
|
|
rb_hash_aset(frame_info, ID2SYM(rb_intern("lines")), rb_hash_new());
|
Add ability to trace exit locations in yjit (#5970)
When running with `--yjit-stats` turned on, yjit can inform the user
what the most common exits are. While this is useful information it
doesn't tell you the source location of the code that exited or what the
code that exited looks like. This change intends to fix that.
To use the feature, run yjit with the `--yjit-trace-exits` option,
which will record the backtrace for every exit that occurs. This functionality
requires the stats feature to be turned on. Calling `--yjit-trace-exits`
will automatically set the `--yjit-stats` option.
Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will
Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file
based on the passed filename.
*Example usage:*
Given the following script, we write to a file called
`concat_array.dump` the results of `RubyVM::YJIT.exit_locations`.
```ruby
def concat_array
["t", "r", *x = "u", "e"].join
end
1000.times do
concat_array
end
RubyVM::YJIT.dump_exit_locations("concat_array.dump")
```
When we run the file with this branch and the appropriate flags the
stacktrace will be recorded. Note Stackprof needs to be installed or you
need to point to the library directly.
```
./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb
```
We can then read the dump file with Stackprof:
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump
```
Results will look similar to the following:
```
==================================
Mode: ()
Samples: 1817 (0.00% miss rate)
GC: 0 (0.00%)
==================================
TOTAL (pct) SAMPLES (pct) FRAME
1001 (55.1%) 1001 (55.1%) concatarray
335 (18.4%) 335 (18.4%) invokeblock
178 (9.8%) 178 (9.8%) send
140 (7.7%) 140 (7.7%) opt_getinlinecache
...etc...
```
Simply inspecting the `concatarray` method will give `SOURCE
UNAVAILABLE` because the source is insns.def.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray
```
Result:
```
concatarray (nonexistent.def:1)
samples: 1001 self (55.1%) / 1001 total (55.1%)
callers:
1000 ( 99.9%) Object#concat_array
1 ( 0.1%) Gem.suffixes
callees (0 total):
code:
SOURCE UNAVAILABLE
```
However if we go deeper to the callee we can see the exact
source of the `concatarray` exit.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array
```
```
Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1)
samples: 0 self (0.0%) / 1000 total (55.0%)
callers:
1000 ( 100.0%) block in <main>
callees (1000 total):
1000 ( 100.0%) concatarray
code:
| 1 | def concat_array
1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join
| 3 | end
```
The `--walk` option is recommended for this feature as it make it
easier to traverse the tree of exits.
*Goals of this feature:*
This feature is meant to give more information when working on YJIT.
The idea is that if we know what code is exiting we can decide what
areas to prioritize when fixing exits. In some cases this means adding
prioritizing avoiding certain exits in yjit. In more complex cases it
might mean changing the Ruby code to be more performant when run with
yjit. Ultimately the more information we have about what code is exiting
AND why, the better we can make yjit.
*Known limitations:*
* Due to tracing exits, running this on large codebases like Rails
can be quite slow.
* On complex methods it can still be difficult to pinpoint the exact cause of
an exit.
* Stackprof is a requirement to to view the backtrace information from
the dump file.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 19:59:39 +03:00
|
|
|
|
|
|
|
if (line != INT2FIX(0)) {
|
|
|
|
rb_hash_aset(frame_info, ID2SYM(rb_intern("line")), line);
|
|
|
|
}
|
|
|
|
|
|
|
|
rb_hash_aset(hash, frame_id, frame_info);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2022-06-11 15:26:03 +03:00
|
|
|
// Parses the YjitExitLocations raw_samples and line_samples collected by
|
Add ability to trace exit locations in yjit (#5970)
When running with `--yjit-stats` turned on, yjit can inform the user
what the most common exits are. While this is useful information it
doesn't tell you the source location of the code that exited or what the
code that exited looks like. This change intends to fix that.
To use the feature, run yjit with the `--yjit-trace-exits` option,
which will record the backtrace for every exit that occurs. This functionality
requires the stats feature to be turned on. Calling `--yjit-trace-exits`
will automatically set the `--yjit-stats` option.
Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will
Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file
based on the passed filename.
*Example usage:*
Given the following script, we write to a file called
`concat_array.dump` the results of `RubyVM::YJIT.exit_locations`.
```ruby
def concat_array
["t", "r", *x = "u", "e"].join
end
1000.times do
concat_array
end
RubyVM::YJIT.dump_exit_locations("concat_array.dump")
```
When we run the file with this branch and the appropriate flags the
stacktrace will be recorded. Note Stackprof needs to be installed or you
need to point to the library directly.
```
./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb
```
We can then read the dump file with Stackprof:
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump
```
Results will look similar to the following:
```
==================================
Mode: ()
Samples: 1817 (0.00% miss rate)
GC: 0 (0.00%)
==================================
TOTAL (pct) SAMPLES (pct) FRAME
1001 (55.1%) 1001 (55.1%) concatarray
335 (18.4%) 335 (18.4%) invokeblock
178 (9.8%) 178 (9.8%) send
140 (7.7%) 140 (7.7%) opt_getinlinecache
...etc...
```
Simply inspecting the `concatarray` method will give `SOURCE
UNAVAILABLE` because the source is insns.def.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray
```
Result:
```
concatarray (nonexistent.def:1)
samples: 1001 self (55.1%) / 1001 total (55.1%)
callers:
1000 ( 99.9%) Object#concat_array
1 ( 0.1%) Gem.suffixes
callees (0 total):
code:
SOURCE UNAVAILABLE
```
However if we go deeper to the callee we can see the exact
source of the `concatarray` exit.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array
```
```
Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1)
samples: 0 self (0.0%) / 1000 total (55.0%)
callers:
1000 ( 100.0%) block in <main>
callees (1000 total):
1000 ( 100.0%) concatarray
code:
| 1 | def concat_array
1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join
| 3 | end
```
The `--walk` option is recommended for this feature as it make it
easier to traverse the tree of exits.
*Goals of this feature:*
This feature is meant to give more information when working on YJIT.
The idea is that if we know what code is exiting we can decide what
areas to prioritize when fixing exits. In some cases this means adding
prioritizing avoiding certain exits in yjit. In more complex cases it
might mean changing the Ruby code to be more performant when run with
yjit. Ultimately the more information we have about what code is exiting
AND why, the better we can make yjit.
*Known limitations:*
* Due to tracing exits, running this on large codebases like Rails
can be quite slow.
* On complex methods it can still be difficult to pinpoint the exact cause of
an exit.
* Stackprof is a requirement to to view the backtrace information from
the dump file.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 19:59:39 +03:00
|
|
|
// rb_yjit_record_exit_stack and turns them into 3 hashes (raw, lines, and frames) to
|
|
|
|
// be used by RubyVM::YJIT.exit_locations. yjit_raw_samples represents the raw frames information
|
|
|
|
// (without name, file, and line), and yjit_line_samples represents the line information
|
|
|
|
// of the iseq caller.
|
|
|
|
VALUE
|
|
|
|
rb_yjit_exit_locations_dict(VALUE *yjit_raw_samples, int *yjit_line_samples, int samples_len)
|
|
|
|
{
|
|
|
|
VALUE result = rb_hash_new();
|
|
|
|
VALUE raw_samples = rb_ary_new_capa(samples_len);
|
|
|
|
VALUE line_samples = rb_ary_new_capa(samples_len);
|
|
|
|
VALUE frames = rb_hash_new();
|
|
|
|
int idx = 0;
|
|
|
|
|
|
|
|
// While the index is less than samples_len, parse yjit_raw_samples and
|
|
|
|
// yjit_line_samples, then add casted values to raw_samples and line_samples array.
|
|
|
|
while (idx < samples_len) {
|
|
|
|
int num = (int)yjit_raw_samples[idx];
|
|
|
|
int line_num = (int)yjit_line_samples[idx];
|
|
|
|
idx++;
|
|
|
|
|
2023-04-18 17:09:16 +03:00
|
|
|
// + 1 as we append an additional sample for the insn
|
|
|
|
rb_ary_push(raw_samples, SIZET2NUM(num + 1));
|
|
|
|
rb_ary_push(line_samples, INT2NUM(line_num + 1));
|
Add ability to trace exit locations in yjit (#5970)
When running with `--yjit-stats` turned on, yjit can inform the user
what the most common exits are. While this is useful information it
doesn't tell you the source location of the code that exited or what the
code that exited looks like. This change intends to fix that.
To use the feature, run yjit with the `--yjit-trace-exits` option,
which will record the backtrace for every exit that occurs. This functionality
requires the stats feature to be turned on. Calling `--yjit-trace-exits`
will automatically set the `--yjit-stats` option.
Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will
Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file
based on the passed filename.
*Example usage:*
Given the following script, we write to a file called
`concat_array.dump` the results of `RubyVM::YJIT.exit_locations`.
```ruby
def concat_array
["t", "r", *x = "u", "e"].join
end
1000.times do
concat_array
end
RubyVM::YJIT.dump_exit_locations("concat_array.dump")
```
When we run the file with this branch and the appropriate flags the
stacktrace will be recorded. Note Stackprof needs to be installed or you
need to point to the library directly.
```
./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb
```
We can then read the dump file with Stackprof:
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump
```
Results will look similar to the following:
```
==================================
Mode: ()
Samples: 1817 (0.00% miss rate)
GC: 0 (0.00%)
==================================
TOTAL (pct) SAMPLES (pct) FRAME
1001 (55.1%) 1001 (55.1%) concatarray
335 (18.4%) 335 (18.4%) invokeblock
178 (9.8%) 178 (9.8%) send
140 (7.7%) 140 (7.7%) opt_getinlinecache
...etc...
```
Simply inspecting the `concatarray` method will give `SOURCE
UNAVAILABLE` because the source is insns.def.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray
```
Result:
```
concatarray (nonexistent.def:1)
samples: 1001 self (55.1%) / 1001 total (55.1%)
callers:
1000 ( 99.9%) Object#concat_array
1 ( 0.1%) Gem.suffixes
callees (0 total):
code:
SOURCE UNAVAILABLE
```
However if we go deeper to the callee we can see the exact
source of the `concatarray` exit.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array
```
```
Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1)
samples: 0 self (0.0%) / 1000 total (55.0%)
callers:
1000 ( 100.0%) block in <main>
callees (1000 total):
1000 ( 100.0%) concatarray
code:
| 1 | def concat_array
1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join
| 3 | end
```
The `--walk` option is recommended for this feature as it make it
easier to traverse the tree of exits.
*Goals of this feature:*
This feature is meant to give more information when working on YJIT.
The idea is that if we know what code is exiting we can decide what
areas to prioritize when fixing exits. In some cases this means adding
prioritizing avoiding certain exits in yjit. In more complex cases it
might mean changing the Ruby code to be more performant when run with
yjit. Ultimately the more information we have about what code is exiting
AND why, the better we can make yjit.
*Known limitations:*
* Due to tracing exits, running this on large codebases like Rails
can be quite slow.
* On complex methods it can still be difficult to pinpoint the exact cause of
an exit.
* Stackprof is a requirement to to view the backtrace information from
the dump file.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 19:59:39 +03:00
|
|
|
|
|
|
|
// Loop through the length of samples_len and add data to the
|
|
|
|
// frames hash. Also push the current value onto the raw_samples
|
2022-06-11 15:26:03 +03:00
|
|
|
// and line_samples array respectively.
|
Add ability to trace exit locations in yjit (#5970)
When running with `--yjit-stats` turned on, yjit can inform the user
what the most common exits are. While this is useful information it
doesn't tell you the source location of the code that exited or what the
code that exited looks like. This change intends to fix that.
To use the feature, run yjit with the `--yjit-trace-exits` option,
which will record the backtrace for every exit that occurs. This functionality
requires the stats feature to be turned on. Calling `--yjit-trace-exits`
will automatically set the `--yjit-stats` option.
Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will
Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file
based on the passed filename.
*Example usage:*
Given the following script, we write to a file called
`concat_array.dump` the results of `RubyVM::YJIT.exit_locations`.
```ruby
def concat_array
["t", "r", *x = "u", "e"].join
end
1000.times do
concat_array
end
RubyVM::YJIT.dump_exit_locations("concat_array.dump")
```
When we run the file with this branch and the appropriate flags the
stacktrace will be recorded. Note Stackprof needs to be installed or you
need to point to the library directly.
```
./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb
```
We can then read the dump file with Stackprof:
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump
```
Results will look similar to the following:
```
==================================
Mode: ()
Samples: 1817 (0.00% miss rate)
GC: 0 (0.00%)
==================================
TOTAL (pct) SAMPLES (pct) FRAME
1001 (55.1%) 1001 (55.1%) concatarray
335 (18.4%) 335 (18.4%) invokeblock
178 (9.8%) 178 (9.8%) send
140 (7.7%) 140 (7.7%) opt_getinlinecache
...etc...
```
Simply inspecting the `concatarray` method will give `SOURCE
UNAVAILABLE` because the source is insns.def.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray
```
Result:
```
concatarray (nonexistent.def:1)
samples: 1001 self (55.1%) / 1001 total (55.1%)
callers:
1000 ( 99.9%) Object#concat_array
1 ( 0.1%) Gem.suffixes
callees (0 total):
code:
SOURCE UNAVAILABLE
```
However if we go deeper to the callee we can see the exact
source of the `concatarray` exit.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array
```
```
Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1)
samples: 0 self (0.0%) / 1000 total (55.0%)
callers:
1000 ( 100.0%) block in <main>
callees (1000 total):
1000 ( 100.0%) concatarray
code:
| 1 | def concat_array
1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join
| 3 | end
```
The `--walk` option is recommended for this feature as it make it
easier to traverse the tree of exits.
*Goals of this feature:*
This feature is meant to give more information when working on YJIT.
The idea is that if we know what code is exiting we can decide what
areas to prioritize when fixing exits. In some cases this means adding
prioritizing avoiding certain exits in yjit. In more complex cases it
might mean changing the Ruby code to be more performant when run with
yjit. Ultimately the more information we have about what code is exiting
AND why, the better we can make yjit.
*Known limitations:*
* Due to tracing exits, running this on large codebases like Rails
can be quite slow.
* On complex methods it can still be difficult to pinpoint the exact cause of
an exit.
* Stackprof is a requirement to to view the backtrace information from
the dump file.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 19:59:39 +03:00
|
|
|
for (int o = 0; o < num; o++) {
|
|
|
|
rb_yjit_add_frame(frames, yjit_raw_samples[idx]);
|
|
|
|
rb_ary_push(raw_samples, SIZET2NUM(yjit_raw_samples[idx]));
|
|
|
|
rb_ary_push(line_samples, INT2NUM(yjit_line_samples[idx]));
|
|
|
|
idx++;
|
|
|
|
}
|
|
|
|
|
|
|
|
rb_ary_push(raw_samples, SIZET2NUM(yjit_raw_samples[idx]));
|
|
|
|
rb_ary_push(line_samples, INT2NUM(yjit_line_samples[idx]));
|
|
|
|
idx++;
|
|
|
|
|
|
|
|
rb_ary_push(raw_samples, SIZET2NUM(yjit_raw_samples[idx]));
|
|
|
|
rb_ary_push(line_samples, INT2NUM(yjit_line_samples[idx]));
|
|
|
|
idx++;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Set add the raw_samples, line_samples, and frames to the results
|
|
|
|
// hash.
|
|
|
|
rb_hash_aset(result, ID2SYM(rb_intern("raw")), raw_samples);
|
|
|
|
rb_hash_aset(result, ID2SYM(rb_intern("lines")), line_samples);
|
|
|
|
rb_hash_aset(result, ID2SYM(rb_intern("frames")), frames);
|
|
|
|
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
uint32_t
|
|
|
|
rb_yjit_get_page_size(void)
|
|
|
|
{
|
|
|
|
#if defined(_SC_PAGESIZE)
|
|
|
|
long page_size = sysconf(_SC_PAGESIZE);
|
|
|
|
if (page_size <= 0) rb_bug("yjit: failed to get page size");
|
|
|
|
|
|
|
|
// 1 GiB limit. x86 CPUs with PDPE1GB can do this and anything larger is unexpected.
|
|
|
|
// Though our design sort of assume we have fine grained control over memory protection
|
|
|
|
// which require small page sizes.
|
|
|
|
if (page_size > 0x40000000l) rb_bug("yjit page size too large");
|
|
|
|
|
|
|
|
return (uint32_t)page_size;
|
|
|
|
#else
|
|
|
|
#error "YJIT supports POSIX only for now"
|
2021-10-06 23:34:16 +03:00
|
|
|
#endif
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
2021-10-06 23:34:16 +03:00
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
#if defined(MAP_FIXED_NOREPLACE) && defined(_SC_PAGESIZE)
|
|
|
|
// Align the current write position to a multiple of bytes
|
|
|
|
static uint8_t *
|
|
|
|
align_ptr(uint8_t *ptr, uint32_t multiple)
|
|
|
|
{
|
|
|
|
// Compute the pointer modulo the given alignment boundary
|
|
|
|
uint32_t rem = ((uint32_t)(uintptr_t)ptr) % multiple;
|
2021-10-06 23:34:16 +03:00
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// If the pointer is already aligned, stop
|
|
|
|
if (rem == 0)
|
|
|
|
return ptr;
|
2021-10-25 17:45:22 +03:00
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// Pad the pointer by the necessary amount to align it
|
|
|
|
uint32_t pad = multiple - rem;
|
2021-10-25 17:45:22 +03:00
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
return ptr + pad;
|
|
|
|
}
|
|
|
|
#endif
|
2021-10-02 01:38:39 +03:00
|
|
|
|
2022-06-14 17:23:13 +03:00
|
|
|
// Address space reservation. Memory pages are mapped on an as needed basis.
|
|
|
|
// See the Rust mm module for details.
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
uint8_t *
|
2022-06-14 17:23:13 +03:00
|
|
|
rb_yjit_reserve_addr_space(uint32_t mem_size)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
#ifndef _WIN32
|
|
|
|
uint8_t *mem_block;
|
|
|
|
|
|
|
|
// On Linux
|
|
|
|
#if defined(MAP_FIXED_NOREPLACE) && defined(_SC_PAGESIZE)
|
2022-06-14 17:23:13 +03:00
|
|
|
uint32_t const page_size = (uint32_t)sysconf(_SC_PAGESIZE);
|
2024-10-08 09:41:28 +03:00
|
|
|
uint8_t *const cfunc_sample_addr = (void *)(uintptr_t)&rb_yjit_reserve_addr_space;
|
2022-06-14 17:23:13 +03:00
|
|
|
uint8_t *const probe_region_end = cfunc_sample_addr + INT32_MAX;
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// Align the requested address to page size
|
2022-06-14 17:23:13 +03:00
|
|
|
uint8_t *req_addr = align_ptr(cfunc_sample_addr, page_size);
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
|
2022-06-14 17:23:13 +03:00
|
|
|
// Probe for addresses close to this function using MAP_FIXED_NOREPLACE
|
|
|
|
// to improve odds of being in range for 32-bit relative call instructions.
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
do {
|
2022-06-14 17:23:13 +03:00
|
|
|
mem_block = mmap(
|
|
|
|
req_addr,
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
mem_size,
|
2022-06-14 17:23:13 +03:00
|
|
|
PROT_NONE,
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED_NOREPLACE,
|
|
|
|
-1,
|
|
|
|
0
|
|
|
|
);
|
|
|
|
|
|
|
|
// If we succeeded, stop
|
|
|
|
if (mem_block != MAP_FAILED) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
// +4MB
|
|
|
|
req_addr += 4 * 1024 * 1024;
|
2022-06-14 17:23:13 +03:00
|
|
|
} while (req_addr < probe_region_end);
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
|
|
|
|
// On MacOS and other platforms
|
|
|
|
#else
|
|
|
|
// Try to map a chunk of memory as executable
|
2022-06-14 17:23:13 +03:00
|
|
|
mem_block = mmap(
|
|
|
|
(void *)rb_yjit_reserve_addr_space,
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
mem_size,
|
2022-06-14 17:23:13 +03:00
|
|
|
PROT_NONE,
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
MAP_PRIVATE | MAP_ANONYMOUS,
|
|
|
|
-1,
|
|
|
|
0
|
|
|
|
);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
// Fallback
|
|
|
|
if (mem_block == MAP_FAILED) {
|
|
|
|
// Try again without the address hint (e.g., valgrind)
|
2022-06-14 17:23:13 +03:00
|
|
|
mem_block = mmap(
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
NULL,
|
|
|
|
mem_size,
|
2022-06-14 17:23:13 +03:00
|
|
|
PROT_NONE,
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
MAP_PRIVATE | MAP_ANONYMOUS,
|
|
|
|
-1,
|
|
|
|
0
|
|
|
|
);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Check that the memory mapping was successful
|
|
|
|
if (mem_block == MAP_FAILED) {
|
2022-06-14 17:23:13 +03:00
|
|
|
perror("ruby: yjit: mmap:");
|
2022-11-02 18:16:26 +03:00
|
|
|
if(errno == ENOMEM) {
|
|
|
|
// No crash report if it's only insufficient memory
|
|
|
|
exit(EXIT_FAILURE);
|
|
|
|
}
|
2022-06-14 17:23:13 +03:00
|
|
|
rb_bug("mmap failed");
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
return mem_block;
|
|
|
|
#else
|
|
|
|
// Windows not supported for now
|
|
|
|
return NULL;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
// Is anyone listening for :c_call and :c_return event currently?
|
|
|
|
bool
|
2023-03-24 19:36:06 +03:00
|
|
|
rb_c_method_tracing_currently_enabled(const rb_execution_context_t *ec)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
rb_event_flag_t tracing_events;
|
|
|
|
if (rb_multi_ractor_p()) {
|
|
|
|
tracing_events = ruby_vm_event_enabled_global_flags;
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
// At the time of writing, events are never removed from
|
|
|
|
// ruby_vm_event_enabled_global_flags so always checking using it would
|
|
|
|
// mean we don't compile even after tracing is disabled.
|
|
|
|
tracing_events = rb_ec_ractor_hooks(ec)->events;
|
|
|
|
}
|
|
|
|
|
|
|
|
return tracing_events & (RUBY_EVENT_C_CALL | RUBY_EVENT_C_RETURN);
|
|
|
|
}
|
|
|
|
|
|
|
|
// The code we generate in gen_send_cfunc() doesn't fire the c_return TracePoint event
|
|
|
|
// like the interpreter. When tracing for c_return is enabled, we patch the code after
|
|
|
|
// the C method return to call into this to fire the event.
|
|
|
|
void
|
|
|
|
rb_full_cfunc_return(rb_execution_context_t *ec, VALUE return_value)
|
|
|
|
{
|
|
|
|
rb_control_frame_t *cfp = ec->cfp;
|
|
|
|
RUBY_ASSERT_ALWAYS(cfp == GET_EC()->cfp);
|
|
|
|
const rb_callable_method_entry_t *me = rb_vm_frame_method_entry(cfp);
|
|
|
|
|
|
|
|
RUBY_ASSERT_ALWAYS(RUBYVM_CFUNC_FRAME_P(cfp));
|
|
|
|
RUBY_ASSERT_ALWAYS(me->def->type == VM_METHOD_TYPE_CFUNC);
|
|
|
|
|
|
|
|
// CHECK_CFP_CONSISTENCY("full_cfunc_return"); TODO revive this
|
|
|
|
|
|
|
|
// Pop the C func's frame and fire the c_return TracePoint event
|
|
|
|
// Note that this is the same order as vm_call_cfunc_with_frame().
|
|
|
|
rb_vm_pop_frame(ec);
|
|
|
|
EXEC_EVENT_HOOK(ec, RUBY_EVENT_C_RETURN, cfp->self, me->def->original_id, me->called_id, me->owner, return_value);
|
|
|
|
// Note, this deviates from the interpreter in that users need to enable
|
|
|
|
// a c_return TracePoint for this DTrace hook to work. A reasonable change
|
|
|
|
// since the Ruby return event works this way as well.
|
|
|
|
RUBY_DTRACE_CMETHOD_RETURN_HOOK(ec, me->owner, me->def->original_id);
|
|
|
|
|
|
|
|
// Push return value into the caller's stack. We know that it's a frame that
|
|
|
|
// uses cfp->sp because we are patching a call done with gen_send_cfunc().
|
|
|
|
ec->cfp->sp[0] = return_value;
|
|
|
|
ec->cfp->sp++;
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned int
|
|
|
|
rb_iseq_encoded_size(const rb_iseq_t *iseq)
|
|
|
|
{
|
|
|
|
return iseq->body->iseq_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
// TODO(alan): consider using an opaque pointer for the payload rather than a void pointer
|
|
|
|
void *
|
|
|
|
rb_iseq_get_yjit_payload(const rb_iseq_t *iseq)
|
|
|
|
{
|
|
|
|
RUBY_ASSERT_ALWAYS(IMEMO_TYPE_P(iseq, imemo_iseq));
|
|
|
|
if (iseq->body) {
|
|
|
|
return iseq->body->yjit_payload;
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
// Body is NULL when constructing the iseq.
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
rb_iseq_set_yjit_payload(const rb_iseq_t *iseq, void *payload)
|
|
|
|
{
|
|
|
|
RUBY_ASSERT_ALWAYS(IMEMO_TYPE_P(iseq, imemo_iseq));
|
|
|
|
RUBY_ASSERT_ALWAYS(iseq->body);
|
|
|
|
RUBY_ASSERT_ALWAYS(NULL == iseq->body->yjit_payload);
|
|
|
|
iseq->body->yjit_payload = payload;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
rb_iseq_reset_jit_func(const rb_iseq_t *iseq)
|
|
|
|
{
|
|
|
|
RUBY_ASSERT_ALWAYS(IMEMO_TYPE_P(iseq, imemo_iseq));
|
2023-08-09 02:06:22 +03:00
|
|
|
iseq->body->jit_entry = NULL;
|
|
|
|
iseq->body->jit_exception = NULL;
|
2022-10-25 19:07:10 +03:00
|
|
|
// Enable re-compiling this ISEQ. Event when it's invalidated for TracePoint,
|
|
|
|
// we'd like to re-compile ISEQs that haven't been converted to trace_* insns.
|
2023-08-09 02:06:22 +03:00
|
|
|
iseq->body->jit_entry_calls = 0;
|
|
|
|
iseq->body->jit_exception_calls = 0;
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
// Get the PC for a given index in an iseq
|
|
|
|
VALUE *
|
|
|
|
rb_iseq_pc_at_idx(const rb_iseq_t *iseq, uint32_t insn_idx)
|
|
|
|
{
|
|
|
|
RUBY_ASSERT_ALWAYS(IMEMO_TYPE_P(iseq, imemo_iseq));
|
|
|
|
RUBY_ASSERT_ALWAYS(insn_idx < iseq->body->iseq_size);
|
|
|
|
VALUE *encoded = iseq->body->iseq_encoded;
|
|
|
|
VALUE *pc = &encoded[insn_idx];
|
|
|
|
return pc;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Get the opcode given a program counter. Can return trace opcode variants.
|
|
|
|
int
|
|
|
|
rb_iseq_opcode_at_pc(const rb_iseq_t *iseq, const VALUE *pc)
|
|
|
|
{
|
|
|
|
// YJIT should only use iseqs after AST to bytecode compilation
|
|
|
|
RUBY_ASSERT_ALWAYS(FL_TEST_RAW((VALUE)iseq, ISEQ_TRANSLATED));
|
|
|
|
|
|
|
|
const VALUE at_pc = *pc;
|
|
|
|
return rb_vm_insn_addr2opcode((const void *)at_pc);
|
|
|
|
}
|
|
|
|
|
2022-07-28 18:45:08 +03:00
|
|
|
unsigned long
|
|
|
|
rb_RSTRING_LEN(VALUE str)
|
|
|
|
{
|
|
|
|
return RSTRING_LEN(str);
|
|
|
|
}
|
|
|
|
|
|
|
|
char *
|
|
|
|
rb_RSTRING_PTR(VALUE str)
|
|
|
|
{
|
|
|
|
return RSTRING_PTR(str);
|
|
|
|
}
|
|
|
|
|
2022-10-05 05:48:05 +03:00
|
|
|
rb_proc_t *
|
|
|
|
rb_yjit_get_proc_ptr(VALUE procv)
|
|
|
|
{
|
|
|
|
rb_proc_t *proc;
|
|
|
|
GetProcPtr(procv, proc);
|
|
|
|
return proc;
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// This is defined only as a named struct inside rb_iseq_constant_body.
|
|
|
|
// By giving it a separate typedef, we make it nameable by rust-bindgen.
|
|
|
|
// Bindgen's temp/anon name isn't guaranteed stable.
|
|
|
|
typedef struct rb_iseq_param_keyword rb_seq_param_keyword_struct;
|
|
|
|
|
|
|
|
const char *
|
|
|
|
rb_insn_name(VALUE insn)
|
|
|
|
{
|
|
|
|
return insn_name(insn);
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned int
|
|
|
|
rb_vm_ci_argc(const struct rb_callinfo *ci)
|
|
|
|
{
|
|
|
|
return vm_ci_argc(ci);
|
|
|
|
}
|
|
|
|
|
|
|
|
ID
|
|
|
|
rb_vm_ci_mid(const struct rb_callinfo *ci)
|
|
|
|
{
|
|
|
|
return vm_ci_mid(ci);
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned int
|
|
|
|
rb_vm_ci_flag(const struct rb_callinfo *ci)
|
|
|
|
{
|
|
|
|
return vm_ci_flag(ci);
|
|
|
|
}
|
|
|
|
|
|
|
|
const struct rb_callinfo_kwarg *
|
|
|
|
rb_vm_ci_kwarg(const struct rb_callinfo *ci)
|
|
|
|
{
|
|
|
|
return vm_ci_kwarg(ci);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
rb_get_cikw_keyword_len(const struct rb_callinfo_kwarg *cikw)
|
|
|
|
{
|
|
|
|
return cikw->keyword_len;
|
|
|
|
}
|
|
|
|
|
|
|
|
VALUE
|
|
|
|
rb_get_cikw_keywords_idx(const struct rb_callinfo_kwarg *cikw, int idx)
|
|
|
|
{
|
|
|
|
return cikw->keywords[idx];
|
|
|
|
}
|
|
|
|
|
|
|
|
rb_method_visibility_t
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_METHOD_ENTRY_VISI(const rb_callable_method_entry_t *me)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return METHOD_ENTRY_VISI(me);
|
|
|
|
}
|
|
|
|
|
|
|
|
rb_method_type_t
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_cme_def_type(const rb_callable_method_entry_t *cme)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
2022-09-14 23:15:55 +03:00
|
|
|
if (UNDEFINED_METHOD_ENTRY_P(cme)) {
|
|
|
|
return VM_METHOD_TYPE_UNDEF;
|
2023-02-26 07:20:43 +03:00
|
|
|
}
|
|
|
|
else {
|
2022-09-14 23:15:55 +03:00
|
|
|
return cme->def->type;
|
|
|
|
}
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
ID
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_cme_def_body_attr_id(const rb_callable_method_entry_t *cme)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return cme->def->body.attr.id;
|
|
|
|
}
|
|
|
|
|
2022-10-11 23:37:05 +03:00
|
|
|
ID rb_get_symbol_id(VALUE namep);
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
enum method_optimized_type
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_cme_def_body_optimized_type(const rb_callable_method_entry_t *cme)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return cme->def->body.optimized.type;
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned int
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_cme_def_body_optimized_index(const rb_callable_method_entry_t *cme)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return cme->def->body.optimized.index;
|
|
|
|
}
|
|
|
|
|
|
|
|
rb_method_cfunc_t *
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_cme_def_body_cfunc(const rb_callable_method_entry_t *cme)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return UNALIGNED_MEMBER_PTR(cme->def, body.cfunc);
|
|
|
|
}
|
|
|
|
|
|
|
|
uintptr_t
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_def_method_serial(const rb_method_definition_t *def)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return def->method_serial;
|
|
|
|
}
|
|
|
|
|
|
|
|
ID
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_def_original_id(const rb_method_definition_t *def)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return def->original_id;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_mct_argc(const rb_method_cfunc_t *mct)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return mct->argc;
|
|
|
|
}
|
|
|
|
|
|
|
|
void *
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_mct_func(const rb_method_cfunc_t *mct)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
2024-10-08 09:41:28 +03:00
|
|
|
return (void*)(uintptr_t)mct->func; // this field is defined as type VALUE (*func)(ANYARGS)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
const rb_iseq_t *
|
|
|
|
rb_get_def_iseq_ptr(rb_method_definition_t *def)
|
|
|
|
{
|
|
|
|
return def_iseq_ptr(def);
|
|
|
|
}
|
|
|
|
|
2022-10-05 05:48:05 +03:00
|
|
|
VALUE
|
|
|
|
rb_get_def_bmethod_proc(rb_method_definition_t *def)
|
|
|
|
{
|
|
|
|
RUBY_ASSERT(def->type == VM_METHOD_TYPE_BMETHOD);
|
|
|
|
return def->body.bmethod.proc;
|
|
|
|
}
|
|
|
|
|
2022-08-15 18:25:49 +03:00
|
|
|
const rb_iseq_t *
|
|
|
|
rb_get_iseq_body_local_iseq(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->local_iseq;
|
|
|
|
}
|
|
|
|
|
2022-10-26 22:27:59 +03:00
|
|
|
const rb_iseq_t *
|
|
|
|
rb_get_iseq_body_parent_iseq(const rb_iseq_t *iseq)
|
|
|
|
{
|
|
|
|
return iseq->body->parent_iseq;
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
unsigned int
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_body_local_table_size(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->local_table_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
VALUE *
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_body_iseq_encoded(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->iseq_encoded;
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_body_stack_max(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->stack_max;
|
|
|
|
}
|
|
|
|
|
2024-04-25 17:04:53 +03:00
|
|
|
enum rb_iseq_type
|
|
|
|
rb_get_iseq_body_type(const rb_iseq_t *iseq)
|
|
|
|
{
|
|
|
|
return iseq->body->type;
|
|
|
|
}
|
|
|
|
|
2022-11-02 19:30:48 +03:00
|
|
|
bool
|
|
|
|
rb_get_iseq_flags_has_lead(const rb_iseq_t *iseq)
|
|
|
|
{
|
|
|
|
return iseq->body->param.flags.has_lead;
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
bool
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_flags_has_opt(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->param.flags.has_opt;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_flags_has_kw(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->param.flags.has_kw;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_flags_has_post(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->param.flags.has_post;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_flags_has_kwrest(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->param.flags.has_kwrest;
|
|
|
|
}
|
|
|
|
|
2024-02-15 19:59:37 +03:00
|
|
|
bool
|
|
|
|
rb_get_iseq_flags_anon_kwrest(const rb_iseq_t *iseq)
|
|
|
|
{
|
|
|
|
return iseq->body->param.flags.anon_kwrest;
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
bool
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_flags_has_rest(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->param.flags.has_rest;
|
|
|
|
}
|
|
|
|
|
2022-09-14 17:32:22 +03:00
|
|
|
bool
|
|
|
|
rb_get_iseq_flags_ruby2_keywords(const rb_iseq_t *iseq)
|
|
|
|
{
|
|
|
|
return iseq->body->param.flags.ruby2_keywords;
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
bool
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_flags_has_block(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->param.flags.has_block;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool
|
2022-11-02 19:30:48 +03:00
|
|
|
rb_get_iseq_flags_ambiguous_param0(const rb_iseq_t *iseq)
|
|
|
|
{
|
|
|
|
return iseq->body->param.flags.ambiguous_param0;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool
|
|
|
|
rb_get_iseq_flags_accepts_no_kwarg(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->param.flags.accepts_no_kwarg;
|
|
|
|
}
|
|
|
|
|
Optimized forwarding callers and callees
This patch optimizes forwarding callers and callees. It only optimizes methods that only take `...` as their parameter, and then pass `...` to other calls.
Calls it optimizes look like this:
```ruby
def bar(a) = a
def foo(...) = bar(...) # optimized
foo(123)
```
```ruby
def bar(a) = a
def foo(...) = bar(1, 2, ...) # optimized
foo(123)
```
```ruby
def bar(*a) = a
def foo(...)
list = [1, 2]
bar(*list, ...) # optimized
end
foo(123)
```
All variants of the above but using `super` are also optimized, including a bare super like this:
```ruby
def foo(...)
super
end
```
This patch eliminates intermediate allocations made when calling methods that accept `...`.
We can observe allocation elimination like this:
```ruby
def m
x = GC.stat(:total_allocated_objects)
yield
GC.stat(:total_allocated_objects) - x
end
def bar(a) = a
def foo(...) = bar(...)
def test
m { foo(123) }
end
test
p test # allocates 1 object on master, but 0 objects with this patch
```
```ruby
def bar(a, b:) = a + b
def foo(...) = bar(...)
def test
m { foo(1, b: 2) }
end
test
p test # allocates 2 objects on master, but 0 objects with this patch
```
How does it work?
-----------------
This patch works by using a dynamic stack size when passing forwarded parameters to callees.
The caller's info object (known as the "CI") contains the stack size of the
parameters, so we pass the CI object itself as a parameter to the callee.
When forwarding parameters, the forwarding ISeq uses the caller's CI to determine how much stack to copy, then copies the caller's stack before calling the callee.
The CI at the forwarded call site is adjusted using information from the caller's CI.
I think this description is kind of confusing, so let's walk through an example with code.
```ruby
def delegatee(a, b) = a + b
def delegator(...)
delegatee(...) # CI2 (FORWARDING)
end
def caller
delegator(1, 2) # CI1 (argc: 2)
end
```
Before we call the delegator method, the stack looks like this:
```
Executing Line | Code | Stack
---------------+---------------------------------------+--------
1| def delegatee(a, b) = a + b | self
2| | 1
3| def delegator(...) | 2
4| # |
5| delegatee(...) # CI2 (FORWARDING) |
6| end |
7| |
8| def caller |
-> 9| delegator(1, 2) # CI1 (argc: 2) |
10| end |
```
The ISeq for `delegator` is tagged as "forwardable", so when `caller` calls in
to `delegator`, it writes `CI1` on to the stack as a local variable for the
`delegator` method. The `delegator` method has a special local called `...`
that holds the caller's CI object.
Here is the ISeq disasm fo `delegator`:
```
== disasm: #<ISeq:delegator@-e:1 (1,0)-(1,39)>
local table (size: 1, argc: 0 [opts: 0, rest: -1, post: 0, block: -1, kw: -1@-1, kwrest: -1])
[ 1] "..."@0
0000 putself ( 1)[LiCa]
0001 getlocal_WC_0 "..."@0
0003 send <calldata!mid:delegatee, argc:0, FCALL|FORWARDING>, nil
0006 leave [Re]
```
The local called `...` will contain the caller's CI: CI1.
Here is the stack when we enter `delegator`:
```
Executing Line | Code | Stack
---------------+---------------------------------------+--------
1| def delegatee(a, b) = a + b | self
2| | 1
3| def delegator(...) | 2
-> 4| # | CI1 (argc: 2)
5| delegatee(...) # CI2 (FORWARDING) | cref_or_me
6| end | specval
7| | type
8| def caller |
9| delegator(1, 2) # CI1 (argc: 2) |
10| end |
```
The CI at `delegatee` on line 5 is tagged as "FORWARDING", so it knows to
memcopy the caller's stack before calling `delegatee`. In this case, it will
memcopy self, 1, and 2 to the stack before calling `delegatee`. It knows how much
memory to copy from the caller because `CI1` contains stack size information
(argc: 2).
Before executing the `send` instruction, we push `...` on the stack. The
`send` instruction pops `...`, and because it is tagged with `FORWARDING`, it
knows to memcopy (using the information in the CI it just popped):
```
== disasm: #<ISeq:delegator@-e:1 (1,0)-(1,39)>
local table (size: 1, argc: 0 [opts: 0, rest: -1, post: 0, block: -1, kw: -1@-1, kwrest: -1])
[ 1] "..."@0
0000 putself ( 1)[LiCa]
0001 getlocal_WC_0 "..."@0
0003 send <calldata!mid:delegatee, argc:0, FCALL|FORWARDING>, nil
0006 leave [Re]
```
Instruction 001 puts the caller's CI on the stack. `send` is tagged with
FORWARDING, so it reads the CI and _copies_ the callers stack to this stack:
```
Executing Line | Code | Stack
---------------+---------------------------------------+--------
1| def delegatee(a, b) = a + b | self
2| | 1
3| def delegator(...) | 2
4| # | CI1 (argc: 2)
-> 5| delegatee(...) # CI2 (FORWARDING) | cref_or_me
6| end | specval
7| | type
8| def caller | self
9| delegator(1, 2) # CI1 (argc: 2) | 1
10| end | 2
```
The "FORWARDING" call site combines information from CI1 with CI2 in order
to support passing other values in addition to the `...` value, as well as
perfectly forward splat args, kwargs, etc.
Since we're able to copy the stack from `caller` in to `delegator`'s stack, we
can avoid allocating objects.
I want to do this to eliminate object allocations for delegate methods.
My long term goal is to implement `Class#new` in Ruby and it uses `...`.
I was able to implement `Class#new` in Ruby
[here](https://github.com/ruby/ruby/pull/9289).
If we adopt the technique in this patch, then we can optimize allocating
objects that take keyword parameters for `initialize`.
For example, this code will allocate 2 objects: one for `SomeObject`, and one
for the kwargs:
```ruby
SomeObject.new(foo: 1)
```
If we combine this technique, plus implement `Class#new` in Ruby, then we can
reduce allocations for this common operation.
Co-Authored-By: John Hawthorn <john@hawthorn.email>
Co-Authored-By: Alan Wu <XrXr@users.noreply.github.com>
2024-04-15 20:48:53 +03:00
|
|
|
bool
|
|
|
|
rb_get_iseq_flags_forwardable(const rb_iseq_t *iseq)
|
|
|
|
{
|
|
|
|
return iseq->body->param.flags.forwardable;
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
const rb_seq_param_keyword_struct *
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_body_param_keyword(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->param.keyword;
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_body_param_size(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->param.size;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_body_param_lead_num(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->param.lead_num;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_body_param_opt_num(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->param.opt_num;
|
|
|
|
}
|
|
|
|
|
|
|
|
const VALUE *
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_iseq_body_param_opt_table(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return iseq->body->param.opt_table;
|
|
|
|
}
|
|
|
|
|
2022-11-08 23:28:28 +03:00
|
|
|
VALUE
|
|
|
|
rb_optimized_call(VALUE *recv, rb_execution_context_t *ec, int argc, VALUE *argv, int kw_splat, VALUE block_handler)
|
|
|
|
{
|
|
|
|
rb_proc_t *proc;
|
|
|
|
GetProcPtr(recv, proc);
|
|
|
|
return rb_vm_invoke_proc(ec, proc, argc, argv, kw_splat, block_handler);
|
|
|
|
}
|
|
|
|
|
2023-03-15 01:38:58 +03:00
|
|
|
unsigned int
|
|
|
|
rb_yjit_iseq_builtin_attrs(const rb_iseq_t *iseq)
|
|
|
|
{
|
|
|
|
return iseq->body->builtin_attrs;
|
|
|
|
}
|
2022-11-08 23:28:28 +03:00
|
|
|
|
2024-03-01 21:03:00 +03:00
|
|
|
// If true, the iseq has only opt_invokebuiltin_delegate(_leave) and leave insns.
|
2023-03-15 01:38:58 +03:00
|
|
|
static bool
|
|
|
|
invokebuiltin_delegate_leave_p(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
2024-03-01 21:03:00 +03:00
|
|
|
int insn1 = rb_vm_insn_addr2opcode((void *)iseq->body->iseq_encoded[0]);
|
|
|
|
if ((int)iseq->body->iseq_size != insn_len(insn1) + insn_len(BIN(leave))) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
int insn2 = rb_vm_insn_addr2opcode((void *)iseq->body->iseq_encoded[insn_len(insn1)]);
|
|
|
|
return (insn1 == BIN(opt_invokebuiltin_delegate) || insn1 == BIN(opt_invokebuiltin_delegate_leave)) &&
|
|
|
|
insn2 == BIN(leave);
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
|
|
|
|
2023-03-15 01:38:58 +03:00
|
|
|
// Return an rb_builtin_function if the iseq contains only that builtin function.
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
const struct rb_builtin_function *
|
2023-03-15 01:38:58 +03:00
|
|
|
rb_yjit_builtin_function(const rb_iseq_t *iseq)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
2023-03-15 01:38:58 +03:00
|
|
|
if (invokebuiltin_delegate_leave_p(iseq)) {
|
|
|
|
return (const struct rb_builtin_function *)iseq->body->iseq_encoded[1];
|
|
|
|
}
|
|
|
|
else {
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
return NULL;
|
2023-03-15 01:38:58 +03:00
|
|
|
}
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
|
|
|
|
2022-05-11 18:20:21 +03:00
|
|
|
VALUE
|
|
|
|
rb_yjit_str_simple_append(VALUE str1, VALUE str2)
|
|
|
|
{
|
|
|
|
return rb_str_cat(str1, RSTRING_PTR(str2), RSTRING_LEN(str2));
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
struct rb_control_frame_struct *
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_ec_cfp(const rb_execution_context_t *ec)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return ec->cfp;
|
|
|
|
}
|
|
|
|
|
2023-03-17 21:53:17 +03:00
|
|
|
const rb_iseq_t *
|
|
|
|
rb_get_cfp_iseq(struct rb_control_frame_struct *cfp)
|
|
|
|
{
|
|
|
|
return cfp->iseq;
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
VALUE *
|
|
|
|
rb_get_cfp_pc(struct rb_control_frame_struct *cfp)
|
|
|
|
{
|
|
|
|
return (VALUE*)cfp->pc;
|
|
|
|
}
|
|
|
|
|
|
|
|
VALUE *
|
|
|
|
rb_get_cfp_sp(struct rb_control_frame_struct *cfp)
|
|
|
|
{
|
|
|
|
return cfp->sp;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
rb_set_cfp_pc(struct rb_control_frame_struct *cfp, const VALUE *pc)
|
|
|
|
{
|
|
|
|
cfp->pc = pc;
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
rb_set_cfp_sp(struct rb_control_frame_struct *cfp, VALUE *sp)
|
|
|
|
{
|
|
|
|
cfp->sp = sp;
|
|
|
|
}
|
|
|
|
|
|
|
|
VALUE
|
|
|
|
rb_get_cfp_self(struct rb_control_frame_struct *cfp)
|
|
|
|
{
|
|
|
|
return cfp->self;
|
|
|
|
}
|
|
|
|
|
|
|
|
VALUE *
|
|
|
|
rb_get_cfp_ep(struct rb_control_frame_struct *cfp)
|
|
|
|
{
|
|
|
|
return (VALUE*)cfp->ep;
|
|
|
|
}
|
|
|
|
|
2022-07-28 18:38:07 +03:00
|
|
|
const VALUE *
|
|
|
|
rb_get_cfp_ep_level(struct rb_control_frame_struct *cfp, uint32_t lv)
|
|
|
|
{
|
|
|
|
uint32_t i;
|
|
|
|
const VALUE *ep = (VALUE*)cfp->ep;
|
|
|
|
for (i = 0; i < lv; i++) {
|
|
|
|
ep = VM_ENV_PREV_EP(ep);
|
|
|
|
}
|
|
|
|
return ep;
|
|
|
|
}
|
|
|
|
|
2023-08-09 02:06:22 +03:00
|
|
|
extern VALUE *rb_vm_base_ptr(struct rb_control_frame_struct *cfp);
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
VALUE
|
|
|
|
rb_yarv_class_of(VALUE obj)
|
|
|
|
{
|
|
|
|
return rb_class_of(obj);
|
|
|
|
}
|
|
|
|
|
|
|
|
// YJIT needs this function to never allocate and never raise
|
|
|
|
VALUE
|
|
|
|
rb_yarv_str_eql_internal(VALUE str1, VALUE str2)
|
|
|
|
{
|
|
|
|
// We wrap this since it's static inline
|
|
|
|
return rb_str_eql_internal(str1, str2);
|
|
|
|
}
|
|
|
|
|
2023-02-15 00:31:33 +03:00
|
|
|
VALUE
|
|
|
|
rb_str_neq_internal(VALUE str1, VALUE str2)
|
|
|
|
{
|
|
|
|
return rb_str_eql_internal(str1, str2) == Qtrue ? Qfalse : Qtrue;
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// YJIT needs this function to never allocate and never raise
|
|
|
|
VALUE
|
|
|
|
rb_yarv_ary_entry_internal(VALUE ary, long offset)
|
|
|
|
{
|
|
|
|
return rb_ary_entry_internal(ary, offset);
|
|
|
|
}
|
|
|
|
|
2023-04-02 09:06:45 +03:00
|
|
|
extern VALUE rb_ary_unshift_m(int argc, VALUE *argv, VALUE ary);
|
2023-03-08 01:03:43 +03:00
|
|
|
|
2023-03-13 18:12:23 +03:00
|
|
|
VALUE
|
|
|
|
rb_yjit_rb_ary_subseq_length(VALUE ary, long beg)
|
|
|
|
{
|
|
|
|
long len = RARRAY_LEN(ary);
|
|
|
|
return rb_ary_subseq(ary, beg, len);
|
|
|
|
}
|
|
|
|
|
2022-06-30 17:26:46 +03:00
|
|
|
VALUE
|
2023-04-05 23:19:31 +03:00
|
|
|
rb_yjit_fix_div_fix(VALUE recv, VALUE obj)
|
|
|
|
{
|
|
|
|
return rb_fix_div_fix(recv, obj);
|
|
|
|
}
|
|
|
|
|
|
|
|
VALUE
|
|
|
|
rb_yjit_fix_mod_fix(VALUE recv, VALUE obj)
|
2022-06-30 17:26:46 +03:00
|
|
|
{
|
|
|
|
return rb_fix_mod_fix(recv, obj);
|
|
|
|
}
|
|
|
|
|
2024-01-23 20:35:34 +03:00
|
|
|
// Return non-zero when `obj` is an array and its last item is a
|
|
|
|
// `ruby2_keywords` hash. We don't support this kind of splat.
|
|
|
|
size_t
|
|
|
|
rb_yjit_ruby2_keywords_splat_p(VALUE obj)
|
|
|
|
{
|
|
|
|
if (!RB_TYPE_P(obj, T_ARRAY)) return 0;
|
|
|
|
long len = RARRAY_LEN(obj);
|
|
|
|
if (len == 0) return 0;
|
|
|
|
VALUE last = RARRAY_AREF(obj, len - 1);
|
|
|
|
if (!RB_TYPE_P(last, T_HASH)) return 0;
|
|
|
|
return FL_TEST_RAW(last, RHASH_PASS_AS_KEYWORDS);
|
|
|
|
}
|
|
|
|
|
2024-02-27 20:50:38 +03:00
|
|
|
// Checks to establish preconditions for rb_yjit_splat_varg_cfunc()
|
|
|
|
VALUE
|
|
|
|
rb_yjit_splat_varg_checks(VALUE *sp, VALUE splat_array, rb_control_frame_t *cfp)
|
|
|
|
{
|
|
|
|
// We inserted a T_ARRAY guard before this call
|
|
|
|
long len = RARRAY_LEN(splat_array);
|
|
|
|
|
|
|
|
// Large splat arrays need a separate allocation
|
|
|
|
if (len < 0 || len > VM_ARGC_STACK_MAX) return Qfalse;
|
|
|
|
|
|
|
|
// Would we overflow if we put the contents of the array onto the stack?
|
|
|
|
if (sp + len > (VALUE *)(cfp - 2)) return Qfalse;
|
|
|
|
|
2024-02-28 22:27:16 +03:00
|
|
|
// Reject keywords hash since that requires duping it sometimes
|
|
|
|
if (len > 0) {
|
|
|
|
VALUE last_hash = RARRAY_AREF(splat_array, len - 1);
|
|
|
|
if (RB_TYPE_P(last_hash, T_HASH) &&
|
|
|
|
FL_TEST_RAW(last_hash, RHASH_PASS_AS_KEYWORDS)) {
|
|
|
|
return Qfalse;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2024-02-27 20:50:38 +03:00
|
|
|
return Qtrue;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Push array elements to the stack for a C method that has a variable number
|
|
|
|
// of parameters. Returns the number of arguments the splat array contributes.
|
|
|
|
int
|
2024-02-28 22:27:16 +03:00
|
|
|
rb_yjit_splat_varg_cfunc(VALUE *stack_splat_array)
|
2024-02-27 20:50:38 +03:00
|
|
|
{
|
|
|
|
VALUE splat_array = *stack_splat_array;
|
|
|
|
int len;
|
|
|
|
|
|
|
|
// We already checked that length fits in `int`
|
|
|
|
RUBY_ASSERT(RB_TYPE_P(splat_array, T_ARRAY));
|
|
|
|
len = (int)RARRAY_LEN(splat_array);
|
|
|
|
|
|
|
|
// Push the contents of the array onto the stack
|
|
|
|
MEMCPY(stack_splat_array, RARRAY_CONST_PTR(splat_array), VALUE, len);
|
|
|
|
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// Print the Ruby source location of some ISEQ for debugging purposes
|
|
|
|
void
|
|
|
|
rb_yjit_dump_iseq_loc(const rb_iseq_t *iseq, uint32_t insn_idx)
|
|
|
|
{
|
|
|
|
char *ptr;
|
|
|
|
long len;
|
|
|
|
VALUE path = rb_iseq_path(iseq);
|
|
|
|
RSTRING_GETMEM(path, ptr, len);
|
|
|
|
fprintf(stderr, "%s %.*s:%u\n", __func__, (int)len, ptr, rb_iseq_line_no(iseq, insn_idx));
|
|
|
|
}
|
|
|
|
|
2024-02-10 01:12:24 +03:00
|
|
|
// Get the number of digits required to print an integer
|
|
|
|
static int
|
|
|
|
num_digits(int integer)
|
|
|
|
{
|
|
|
|
int num = 1;
|
|
|
|
while (integer /= 10) {
|
|
|
|
num++;
|
|
|
|
}
|
|
|
|
return num;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Allocate a C string that formats an ISEQ label like iseq_inspect()
|
|
|
|
char *
|
|
|
|
rb_yjit_iseq_inspect(const rb_iseq_t *iseq)
|
|
|
|
{
|
|
|
|
const char *label = RSTRING_PTR(iseq->body->location.label);
|
|
|
|
const char *path = RSTRING_PTR(rb_iseq_path(iseq));
|
|
|
|
int lineno = iseq->body->location.code_location.beg_pos.lineno;
|
|
|
|
|
|
|
|
char *buf = ZALLOC_N(char, strlen(label) + strlen(path) + num_digits(lineno) + 3);
|
|
|
|
sprintf(buf, "%s@%s:%d", label, path, lineno);
|
|
|
|
return buf;
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// The FL_TEST() macro
|
|
|
|
VALUE
|
|
|
|
rb_FL_TEST(VALUE obj, VALUE flags)
|
|
|
|
{
|
|
|
|
return RB_FL_TEST(obj, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
// The FL_TEST_RAW() macro, normally an internal implementation detail
|
|
|
|
VALUE
|
|
|
|
rb_FL_TEST_RAW(VALUE obj, VALUE flags)
|
|
|
|
{
|
|
|
|
return FL_TEST_RAW(obj, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
// The RB_TYPE_P macro
|
|
|
|
bool
|
|
|
|
rb_RB_TYPE_P(VALUE obj, enum ruby_value_type t)
|
|
|
|
{
|
|
|
|
return RB_TYPE_P(obj, t);
|
|
|
|
}
|
|
|
|
|
|
|
|
long
|
|
|
|
rb_RSTRUCT_LEN(VALUE st)
|
|
|
|
{
|
|
|
|
return RSTRUCT_LEN(st);
|
|
|
|
}
|
|
|
|
|
|
|
|
// There are RSTRUCT_SETs in ruby/internal/core/rstruct.h and internal/struct.h
|
|
|
|
// with different types (int vs long) for k. Here we use the one from ruby/internal/core/rstruct.h,
|
|
|
|
// which takes an int.
|
|
|
|
void
|
|
|
|
rb_RSTRUCT_SET(VALUE st, int k, VALUE v)
|
|
|
|
{
|
|
|
|
RSTRUCT_SET(st, k, v);
|
|
|
|
}
|
|
|
|
|
|
|
|
const struct rb_callinfo *
|
2022-08-15 18:25:49 +03:00
|
|
|
rb_get_call_data_ci(const struct rb_call_data *cd)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
return cd->ci;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool
|
|
|
|
rb_BASIC_OP_UNREDEFINED_P(enum ruby_basic_operators bop, uint32_t klass)
|
|
|
|
{
|
|
|
|
return BASIC_OP_UNREDEFINED_P(bop, klass);
|
|
|
|
}
|
|
|
|
|
|
|
|
VALUE
|
|
|
|
rb_RCLASS_ORIGIN(VALUE c)
|
|
|
|
{
|
|
|
|
return RCLASS_ORIGIN(c);
|
|
|
|
}
|
|
|
|
|
2022-05-11 18:20:21 +03:00
|
|
|
// Return the string encoding index
|
|
|
|
int
|
|
|
|
rb_ENCODING_GET(VALUE obj)
|
|
|
|
{
|
|
|
|
return RB_ENCODING_GET(obj);
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
bool
|
|
|
|
rb_yjit_multi_ractor_p(void)
|
|
|
|
{
|
|
|
|
return rb_multi_ractor_p();
|
|
|
|
}
|
|
|
|
|
|
|
|
// For debug builds
|
|
|
|
void
|
|
|
|
rb_assert_iseq_handle(VALUE handle)
|
|
|
|
{
|
|
|
|
RUBY_ASSERT_ALWAYS(IMEMO_TYPE_P(handle, imemo_iseq));
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
rb_IMEMO_TYPE_P(VALUE imemo, enum imemo_type imemo_type)
|
|
|
|
{
|
|
|
|
return IMEMO_TYPE_P(imemo, imemo_type);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
rb_assert_cme_handle(VALUE handle)
|
|
|
|
{
|
2024-05-03 19:00:24 +03:00
|
|
|
RUBY_ASSERT_ALWAYS(!rb_objspace_garbage_object_p(handle));
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
RUBY_ASSERT_ALWAYS(IMEMO_TYPE_P(handle, imemo_ment));
|
|
|
|
}
|
|
|
|
|
2022-10-18 19:07:11 +03:00
|
|
|
// Used for passing a callback and other data over rb_objspace_each_objects
|
|
|
|
struct iseq_callback_data {
|
|
|
|
rb_iseq_callback callback;
|
|
|
|
void *data;
|
|
|
|
};
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// Heap-walking callback for rb_yjit_for_each_iseq().
|
|
|
|
static int
|
|
|
|
for_each_iseq_i(void *vstart, void *vend, size_t stride, void *data)
|
|
|
|
{
|
2022-10-18 19:07:11 +03:00
|
|
|
const struct iseq_callback_data *callback_data = (struct iseq_callback_data *)data;
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
VALUE v = (VALUE)vstart;
|
|
|
|
for (; v != (VALUE)vend; v += stride) {
|
|
|
|
void *ptr = asan_poisoned_object_p(v);
|
|
|
|
asan_unpoison_object(v, false);
|
|
|
|
|
|
|
|
if (rb_obj_is_iseq(v)) {
|
|
|
|
rb_iseq_t *iseq = (rb_iseq_t *)v;
|
2022-10-18 19:07:11 +03:00
|
|
|
callback_data->callback(iseq, callback_data->data);
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
asan_poison_object_if(ptr, v);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Iterate through the whole GC heap and invoke a callback for each iseq.
|
|
|
|
// Used for global code invalidation.
|
|
|
|
void
|
2022-10-18 19:07:11 +03:00
|
|
|
rb_yjit_for_each_iseq(rb_iseq_callback callback, void *data)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
2022-10-18 19:07:11 +03:00
|
|
|
struct iseq_callback_data callback_data = { .callback = callback, .data = data };
|
|
|
|
rb_objspace_each_objects(for_each_iseq_i, (void *)&callback_data);
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
// For running write barriers from Rust. Required when we add a new edge in the
|
|
|
|
// object graph from `old` to `young`.
|
|
|
|
void
|
|
|
|
rb_yjit_obj_written(VALUE old, VALUE young, const char *file, int line)
|
|
|
|
{
|
|
|
|
rb_obj_written(old, Qundef, young, file, line);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Acquire the VM lock and then signal all other Ruby threads (ractors) to
|
|
|
|
// contend for the VM lock, putting them to sleep. YJIT uses this to evict
|
|
|
|
// threads running inside generated code so among other things, it can
|
|
|
|
// safely change memory protection of regions housing generated code.
|
|
|
|
void
|
|
|
|
rb_yjit_vm_lock_then_barrier(unsigned int *recursive_lock_level, const char *file, int line)
|
|
|
|
{
|
|
|
|
rb_vm_lock_enter(recursive_lock_level, file, line);
|
|
|
|
rb_vm_barrier();
|
|
|
|
}
|
|
|
|
|
|
|
|
// Release the VM lock. The lock level must point to the same integer used to
|
|
|
|
// acquire the lock.
|
|
|
|
void
|
|
|
|
rb_yjit_vm_unlock(unsigned int *recursive_lock_level, const char *file, int line)
|
|
|
|
{
|
|
|
|
rb_vm_lock_leave(recursive_lock_level, file, line);
|
|
|
|
}
|
|
|
|
|
2023-08-09 02:06:22 +03:00
|
|
|
void
|
|
|
|
rb_yjit_compile_iseq(const rb_iseq_t *iseq, rb_execution_context_t *ec, bool jit_exception)
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
{
|
|
|
|
RB_VM_LOCK_ENTER();
|
|
|
|
rb_vm_barrier();
|
|
|
|
|
2023-08-09 02:06:22 +03:00
|
|
|
// Compile a block version starting at the current instruction
|
|
|
|
uint8_t *rb_yjit_iseq_gen_entry_point(const rb_iseq_t *iseq, rb_execution_context_t *ec, bool jit_exception); // defined in Rust
|
2024-10-08 09:41:28 +03:00
|
|
|
uintptr_t code_ptr = (uintptr_t)rb_yjit_iseq_gen_entry_point(iseq, ec, jit_exception);
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
|
2023-08-09 02:06:22 +03:00
|
|
|
if (jit_exception) {
|
|
|
|
iseq->body->jit_exception = (rb_jit_func_t)code_ptr;
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
|
|
|
else {
|
2023-08-09 02:06:22 +03:00
|
|
|
iseq->body->jit_entry = (rb_jit_func_t)code_ptr;
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
RB_VM_LOCK_LEAVE();
|
|
|
|
}
|
|
|
|
|
|
|
|
// GC root for interacting with the GC
|
|
|
|
struct yjit_root_struct {
|
|
|
|
bool unused; // empty structs are not legal in C99
|
2021-10-02 01:38:39 +03:00
|
|
|
};
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// For dealing with refinements
|
|
|
|
void
|
|
|
|
rb_yjit_invalidate_all_method_lookup_assumptions(void)
|
|
|
|
{
|
|
|
|
// It looks like Module#using actually doesn't need to invalidate all the
|
|
|
|
// method caches, so we do nothing here for now.
|
|
|
|
}
|
|
|
|
|
2022-11-17 23:59:59 +03:00
|
|
|
// Number of object shapes, which might be useful for investigating YJIT exit reasons.
|
2024-08-28 05:24:17 +03:00
|
|
|
VALUE
|
|
|
|
rb_object_shape_count(void)
|
2022-11-17 23:59:59 +03:00
|
|
|
{
|
|
|
|
// next_shape_id starts from 0, so it's the same as the count
|
2023-02-17 16:32:51 +03:00
|
|
|
return ULONG2NUM((unsigned long)GET_SHAPE_TREE()->next_shape_id);
|
2022-11-17 23:59:59 +03:00
|
|
|
}
|
|
|
|
|
2023-03-15 20:43:49 +03:00
|
|
|
// Assert that we have the VM lock. Relevant mostly for multi ractor situations.
|
|
|
|
// The GC takes the lock before calling us, and this asserts that it indeed happens.
|
|
|
|
void
|
|
|
|
rb_yjit_assert_holding_vm_lock(void)
|
|
|
|
{
|
|
|
|
ASSERT_vm_locking();
|
|
|
|
}
|
|
|
|
|
2023-07-24 23:51:46 +03:00
|
|
|
// The number of stack slots that vm_sendish() pops for send and invokesuper.
|
|
|
|
size_t
|
|
|
|
rb_yjit_sendish_sp_pops(const struct rb_callinfo *ci)
|
|
|
|
{
|
|
|
|
return 1 - sp_inc_of_sendish(ci); // + 1 to ignore return value push
|
|
|
|
}
|
|
|
|
|
|
|
|
// The number of stack slots that vm_sendish() pops for invokeblock.
|
|
|
|
size_t
|
|
|
|
rb_yjit_invokeblock_sp_pops(const struct rb_callinfo *ci)
|
|
|
|
{
|
|
|
|
return 1 - sp_inc_of_invokeblock(ci); // + 1 to ignore return value push
|
|
|
|
}
|
|
|
|
|
2023-08-09 02:06:22 +03:00
|
|
|
// Setup jit_return to avoid returning a non-Qundef value on a non-FINISH frame.
|
|
|
|
// See [jit_compile_exception] for details.
|
|
|
|
void
|
|
|
|
rb_yjit_set_exception_return(rb_control_frame_t *cfp, void *leave_exit, void *leave_exception)
|
|
|
|
{
|
|
|
|
if (VM_FRAME_FINISHED_P(cfp)) {
|
|
|
|
// If it's a FINISH frame, just normally exit with a non-Qundef value.
|
|
|
|
cfp->jit_return = leave_exit;
|
|
|
|
}
|
|
|
|
else if (cfp->jit_return) {
|
|
|
|
while (!VM_FRAME_FINISHED_P(cfp)) {
|
|
|
|
if (cfp->jit_return == leave_exit) {
|
|
|
|
// Unlike jit_exec(), leave_exit is not safe on a non-FINISH frame on
|
|
|
|
// jit_exec_exception(). See [jit_exec] and [jit_exec_exception] for
|
|
|
|
// details. Exit to the interpreter with Qundef to let it keep executing
|
|
|
|
// other Ruby frames.
|
|
|
|
cfp->jit_return = leave_exception;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
cfp = RUBY_VM_PREVIOUS_CONTROL_FRAME(cfp);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
// If the caller was not JIT code, exit to the interpreter with Qundef
|
|
|
|
// to keep executing Ruby frames with the interpreter.
|
|
|
|
cfp->jit_return = leave_exception;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
// Primitives used by yjit.rb
|
|
|
|
VALUE rb_yjit_stats_enabled_p(rb_execution_context_t *ec, VALUE self);
|
2023-08-19 01:27:59 +03:00
|
|
|
VALUE rb_yjit_print_stats_p(rb_execution_context_t *ec, VALUE self);
|
Add ability to trace exit locations in yjit (#5970)
When running with `--yjit-stats` turned on, yjit can inform the user
what the most common exits are. While this is useful information it
doesn't tell you the source location of the code that exited or what the
code that exited looks like. This change intends to fix that.
To use the feature, run yjit with the `--yjit-trace-exits` option,
which will record the backtrace for every exit that occurs. This functionality
requires the stats feature to be turned on. Calling `--yjit-trace-exits`
will automatically set the `--yjit-stats` option.
Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will
Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file
based on the passed filename.
*Example usage:*
Given the following script, we write to a file called
`concat_array.dump` the results of `RubyVM::YJIT.exit_locations`.
```ruby
def concat_array
["t", "r", *x = "u", "e"].join
end
1000.times do
concat_array
end
RubyVM::YJIT.dump_exit_locations("concat_array.dump")
```
When we run the file with this branch and the appropriate flags the
stacktrace will be recorded. Note Stackprof needs to be installed or you
need to point to the library directly.
```
./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb
```
We can then read the dump file with Stackprof:
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump
```
Results will look similar to the following:
```
==================================
Mode: ()
Samples: 1817 (0.00% miss rate)
GC: 0 (0.00%)
==================================
TOTAL (pct) SAMPLES (pct) FRAME
1001 (55.1%) 1001 (55.1%) concatarray
335 (18.4%) 335 (18.4%) invokeblock
178 (9.8%) 178 (9.8%) send
140 (7.7%) 140 (7.7%) opt_getinlinecache
...etc...
```
Simply inspecting the `concatarray` method will give `SOURCE
UNAVAILABLE` because the source is insns.def.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray
```
Result:
```
concatarray (nonexistent.def:1)
samples: 1001 self (55.1%) / 1001 total (55.1%)
callers:
1000 ( 99.9%) Object#concat_array
1 ( 0.1%) Gem.suffixes
callees (0 total):
code:
SOURCE UNAVAILABLE
```
However if we go deeper to the callee we can see the exact
source of the `concatarray` exit.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array
```
```
Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1)
samples: 0 self (0.0%) / 1000 total (55.0%)
callers:
1000 ( 100.0%) block in <main>
callees (1000 total):
1000 ( 100.0%) concatarray
code:
| 1 | def concat_array
1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join
| 3 | end
```
The `--walk` option is recommended for this feature as it make it
easier to traverse the tree of exits.
*Goals of this feature:*
This feature is meant to give more information when working on YJIT.
The idea is that if we know what code is exiting we can decide what
areas to prioritize when fixing exits. In some cases this means adding
prioritizing avoiding certain exits in yjit. In more complex cases it
might mean changing the Ruby code to be more performant when run with
yjit. Ultimately the more information we have about what code is exiting
AND why, the better we can make yjit.
*Known limitations:*
* Due to tracing exits, running this on large codebases like Rails
can be quite slow.
* On complex methods it can still be difficult to pinpoint the exact cause of
an exit.
* Stackprof is a requirement to to view the backtrace information from
the dump file.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 19:59:39 +03:00
|
|
|
VALUE rb_yjit_trace_exit_locations_enabled_p(rb_execution_context_t *ec, VALUE self);
|
2024-09-18 03:06:27 +03:00
|
|
|
VALUE rb_yjit_get_stats(rb_execution_context_t *ec, VALUE self, VALUE key);
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
VALUE rb_yjit_reset_stats_bang(rb_execution_context_t *ec, VALUE self);
|
|
|
|
VALUE rb_yjit_disasm_iseq(rb_execution_context_t *ec, VALUE self, VALUE iseq);
|
|
|
|
VALUE rb_yjit_insns_compiled(rb_execution_context_t *ec, VALUE self, VALUE iseq);
|
2022-10-31 21:29:45 +03:00
|
|
|
VALUE rb_yjit_code_gc(rb_execution_context_t *ec, VALUE self);
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
VALUE rb_yjit_simulate_oom_bang(rb_execution_context_t *ec, VALUE self);
|
Add ability to trace exit locations in yjit (#5970)
When running with `--yjit-stats` turned on, yjit can inform the user
what the most common exits are. While this is useful information it
doesn't tell you the source location of the code that exited or what the
code that exited looks like. This change intends to fix that.
To use the feature, run yjit with the `--yjit-trace-exits` option,
which will record the backtrace for every exit that occurs. This functionality
requires the stats feature to be turned on. Calling `--yjit-trace-exits`
will automatically set the `--yjit-stats` option.
Users must call `RubyVM::YJIT.dump_exit_locations(filename)` which will
Marshal dump the contents of `RubyVM::YJIT.exit_locations` into a file
based on the passed filename.
*Example usage:*
Given the following script, we write to a file called
`concat_array.dump` the results of `RubyVM::YJIT.exit_locations`.
```ruby
def concat_array
["t", "r", *x = "u", "e"].join
end
1000.times do
concat_array
end
RubyVM::YJIT.dump_exit_locations("concat_array.dump")
```
When we run the file with this branch and the appropriate flags the
stacktrace will be recorded. Note Stackprof needs to be installed or you
need to point to the library directly.
```
./ruby --yjit --yjit-call-threshold=1 --yjit-trace-exits -I/Users/eileencodes/open_source/stackprof/lib test.rb
```
We can then read the dump file with Stackprof:
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump
```
Results will look similar to the following:
```
==================================
Mode: ()
Samples: 1817 (0.00% miss rate)
GC: 0 (0.00%)
==================================
TOTAL (pct) SAMPLES (pct) FRAME
1001 (55.1%) 1001 (55.1%) concatarray
335 (18.4%) 335 (18.4%) invokeblock
178 (9.8%) 178 (9.8%) send
140 (7.7%) 140 (7.7%) opt_getinlinecache
...etc...
```
Simply inspecting the `concatarray` method will give `SOURCE
UNAVAILABLE` because the source is insns.def.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method concatarray
```
Result:
```
concatarray (nonexistent.def:1)
samples: 1001 self (55.1%) / 1001 total (55.1%)
callers:
1000 ( 99.9%) Object#concat_array
1 ( 0.1%) Gem.suffixes
callees (0 total):
code:
SOURCE UNAVAILABLE
```
However if we go deeper to the callee we can see the exact
source of the `concatarray` exit.
```
./ruby -I/Users/eileencodes/open_source/stackprof/lib/ /Users/eileencodes/open_source/stackprof/bin/stackprof --text concat_array.dump --method Object#concat_array
```
```
Object#concat_array (/Users/eileencodes/open_source/rust_ruby/test.rb:1)
samples: 0 self (0.0%) / 1000 total (55.0%)
callers:
1000 ( 100.0%) block in <main>
callees (1000 total):
1000 ( 100.0%) concatarray
code:
| 1 | def concat_array
1000 (55.0%) | 2 | ["t", "r", *x = "u", "e"].join
| 3 | end
```
The `--walk` option is recommended for this feature as it make it
easier to traverse the tree of exits.
*Goals of this feature:*
This feature is meant to give more information when working on YJIT.
The idea is that if we know what code is exiting we can decide what
areas to prioritize when fixing exits. In some cases this means adding
prioritizing avoiding certain exits in yjit. In more complex cases it
might mean changing the Ruby code to be more performant when run with
yjit. Ultimately the more information we have about what code is exiting
AND why, the better we can make yjit.
*Known limitations:*
* Due to tracing exits, running this on large codebases like Rails
can be quite slow.
* On complex methods it can still be difficult to pinpoint the exact cause of
an exit.
* Stackprof is a requirement to to view the backtrace information from
the dump file.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
2022-06-09 19:59:39 +03:00
|
|
|
VALUE rb_yjit_get_exit_locations(rb_execution_context_t *ec, VALUE self);
|
2023-12-19 22:47:27 +03:00
|
|
|
VALUE rb_yjit_enable(rb_execution_context_t *ec, VALUE self, VALUE gen_stats, VALUE print_stats);
|
Rust YJIT
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
https://github.com/Shopify/ruby/commit/1fd9573d8b4b65219f1c2407f30a0a60e537f8be
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
2022-04-19 21:40:21 +03:00
|
|
|
|
|
|
|
// Preprocessed yjit.rb generated during build
|
|
|
|
#include "yjit.rbinc"
|