ruby/rational.c

2797 строки
64 KiB
C
Исходник Обычный вид История

/*
rational.c: Coded by Tadayoshi Funaba 2008-2012
This implementation is based on Keiju Ishitsuka's Rational library
which is written in ruby.
*/
#include "ruby/internal/config.h"
#include <ctype.h>
#include <float.h>
#include <math.h>
#ifdef HAVE_IEEEFP_H
#include <ieeefp.h>
#endif
#if defined(HAVE_LIBGMP) && defined(HAVE_GMP_H)
#define USE_GMP
#include <gmp.h>
#endif
#undef NDEBUG
#define NDEBUG
#include "id.h"
#include "internal.h"
#include "internal/complex.h"
#include "internal/gc.h"
#include "internal/numeric.h"
#include "internal/object.h"
#include "internal/rational.h"
#include "ruby_assert.h"
#define ZERO INT2FIX(0)
#define ONE INT2FIX(1)
#define TWO INT2FIX(2)
#define GMP_GCD_DIGITS 1
#define INT_ZERO_P(x) (FIXNUM_P(x) ? FIXNUM_ZERO_P(x) : rb_bigzero_p(x))
VALUE rb_cRational;
2019-08-03 02:37:08 +03:00
static ID id_abs, id_integer_p,
id_i_num, id_i_den;
2019-08-03 02:37:08 +03:00
#define id_idiv idDiv
#define id_to_i idTo_i
#define f_boolcast(x) ((x) ? Qtrue : Qfalse)
#define f_inspect rb_inspect
#define f_to_s rb_obj_as_string
static VALUE nurat_to_f(VALUE self);
inline static VALUE
f_add(VALUE x, VALUE y)
{
if (FIXNUM_ZERO_P(y))
return x;
if (FIXNUM_ZERO_P(x))
return y;
return rb_funcall(x, '+', 1, y);
}
inline static VALUE
f_div(VALUE x, VALUE y)
{
if (y == ONE)
return x;
if (RB_INTEGER_TYPE_P(x))
return rb_int_div(x, y);
return rb_funcall(x, '/', 1, y);
}
inline static int
f_lt_p(VALUE x, VALUE y)
{
if (FIXNUM_P(x) && FIXNUM_P(y))
return (SIGNED_VALUE)x < (SIGNED_VALUE)y;
return RTEST(rb_funcall(x, '<', 1, y));
}
#ifndef NDEBUG
/* f_mod is used only in f_gcd defined when NDEBUG is not defined */
2019-08-02 05:19:29 +03:00
inline static VALUE
f_mod(VALUE x, VALUE y)
{
if (RB_INTEGER_TYPE_P(x))
return rb_int_modulo(x, y);
return rb_funcall(x, '%', 1, y);
}
#endif
inline static VALUE
f_mul(VALUE x, VALUE y)
{
if (FIXNUM_ZERO_P(y) && RB_INTEGER_TYPE_P(x))
return ZERO;
if (y == ONE) return x;
if (FIXNUM_ZERO_P(x) && RB_INTEGER_TYPE_P(y))
return ZERO;
if (x == ONE) return y;
else if (RB_INTEGER_TYPE_P(x))
return rb_int_mul(x, y);
return rb_funcall(x, '*', 1, y);
}
inline static VALUE
f_sub(VALUE x, VALUE y)
{
if (FIXNUM_P(y) && FIXNUM_ZERO_P(y))
return x;
return rb_funcall(x, '-', 1, y);
}
inline static VALUE
f_abs(VALUE x)
{
if (RB_INTEGER_TYPE_P(x))
return rb_int_abs(x);
return rb_funcall(x, id_abs, 0);
}
2019-08-02 05:22:56 +03:00
inline static VALUE
f_integer_p(VALUE x)
{
return RB_INTEGER_TYPE_P(x);
}
inline static VALUE
f_to_i(VALUE x)
{
if (RB_TYPE_P(x, T_STRING))
return rb_str_to_inum(x, 10, 0);
return rb_funcall(x, id_to_i, 0);
}
inline static VALUE
f_eqeq_p(VALUE x, VALUE y)
{
if (FIXNUM_P(x) && FIXNUM_P(y))
return x == y;
return (int)rb_equal(x, y);
}
inline static VALUE
f_idiv(VALUE x, VALUE y)
{
if (RB_INTEGER_TYPE_P(x))
return rb_int_idiv(x, y);
return rb_funcall(x, id_idiv, 1, y);
}
#define f_expt10(x) rb_int_pow(INT2FIX(10), x)
inline static int
f_zero_p(VALUE x)
{
if (RB_INTEGER_TYPE_P(x)) {
return FIXNUM_ZERO_P(x);
}
else if (RB_TYPE_P(x, T_RATIONAL)) {
VALUE num = RRATIONAL(x)->num;
return FIXNUM_ZERO_P(num);
}
return (int)rb_equal(x, ZERO);
}
#define f_nonzero_p(x) (!f_zero_p(x))
inline static int
f_one_p(VALUE x)
{
if (RB_INTEGER_TYPE_P(x)) {
return x == LONG2FIX(1);
}
else if (RB_TYPE_P(x, T_RATIONAL)) {
VALUE num = RRATIONAL(x)->num;
VALUE den = RRATIONAL(x)->den;
return num == LONG2FIX(1) && den == LONG2FIX(1);
}
return (int)rb_equal(x, ONE);
}
inline static int
f_minus_one_p(VALUE x)
{
if (RB_INTEGER_TYPE_P(x)) {
return x == LONG2FIX(-1);
}
else if (RB_TYPE_P(x, T_BIGNUM)) {
return Qfalse;
}
else if (RB_TYPE_P(x, T_RATIONAL)) {
VALUE num = RRATIONAL(x)->num;
VALUE den = RRATIONAL(x)->den;
return num == LONG2FIX(-1) && den == LONG2FIX(1);
}
return (int)rb_equal(x, INT2FIX(-1));
}
inline static int
f_kind_of_p(VALUE x, VALUE c)
{
return (int)rb_obj_is_kind_of(x, c);
}
inline static int
k_numeric_p(VALUE x)
{
return f_kind_of_p(x, rb_cNumeric);
}
inline static int
k_integer_p(VALUE x)
{
return RB_INTEGER_TYPE_P(x);
}
inline static int
k_float_p(VALUE x)
{
return RB_FLOAT_TYPE_P(x);
}
inline static int
k_rational_p(VALUE x)
{
return RB_TYPE_P(x, T_RATIONAL);
}
#define k_exact_p(x) (!k_float_p(x))
#define k_inexact_p(x) k_float_p(x)
#define k_exact_zero_p(x) (k_exact_p(x) && f_zero_p(x))
#define k_exact_one_p(x) (k_exact_p(x) && f_one_p(x))
#ifdef USE_GMP
VALUE
rb_gcd_gmp(VALUE x, VALUE y)
{
const size_t nails = (sizeof(BDIGIT)-SIZEOF_BDIGIT)*CHAR_BIT;
mpz_t mx, my, mz;
size_t count;
VALUE z;
long zn;
mpz_init(mx);
mpz_init(my);
mpz_init(mz);
mpz_import(mx, BIGNUM_LEN(x), -1, sizeof(BDIGIT), 0, nails, BIGNUM_DIGITS(x));
mpz_import(my, BIGNUM_LEN(y), -1, sizeof(BDIGIT), 0, nails, BIGNUM_DIGITS(y));
mpz_gcd(mz, mx, my);
mpz_clear(mx);
mpz_clear(my);
zn = (mpz_sizeinbase(mz, 16) + SIZEOF_BDIGIT*2 - 1) / (SIZEOF_BDIGIT*2);
z = rb_big_new(zn, 1);
mpz_export(BIGNUM_DIGITS(z), &count, -1, sizeof(BDIGIT), 0, nails, mz);
mpz_clear(mz);
return rb_big_norm(z);
}
#endif
#ifndef NDEBUG
#define f_gcd f_gcd_orig
#endif
inline static long
i_gcd(long x, long y)
{
Improve performance of some Time & Rational methods rational.c (i_gcd): replace GCD algorithm from Euclidean algorithm to Stein algorithm (https://en.wikipedia.org/wiki/Binary_GCD_algorithm). Some Time methods will call internal quov() function and it calls Rational#quo -> f_muldiv() -> i_gcd() in rational.c And some Rational methods also call i_gcd(). The implementation of Euclidean algorithm spent a long time at modulo operation (ie "x = y % x;"). The Stein algorithm will replace with shift operation which is faster than modulo. Time#subsec -> 36 % up Time#to_r -> 26 % up Rational#+ -> 14 % up Rational#- -> 15 % up Rational#* -> 13 % up [ruby-core:80843] [Bug #13503] [Fix GH-1596] ### Before Time#subsec 2.142M (± 9.8%) i/s - 10.659M in 5.022659s Time#to_r 2.003M (± 9.1%) i/s - 9.959M in 5.012445s Rational#+ 3.843M (± 0.9%) i/s - 19.274M in 5.016254s Rational#- 3.820M (± 1.3%) i/s - 19.149M in 5.014137s Rational#* 5.198M (± 1.4%) i/s - 26.016M in 5.005664s * After Time#subsec 2.902M (± 2.9%) i/s - 14.505M in 5.001815s Time#to_r 2.503M (± 4.8%) i/s - 12.512M in 5.011454s Rational#+ 4.390M (± 1.2%) i/s - 22.001M in 5.012413s Rational#- 4.391M (± 1.2%) i/s - 22.013M in 5.014584s Rational#* 5.872M (± 2.2%) i/s - 29.369M in 5.003666s * Test code require 'benchmark/ips' Benchmark.ips do |x| x.report "Time#subsec" do |t| time = Time.now t.times { time.subsec } end x.report "Time#to_r" do |t| time = Time.now t.times { time.to_r } end x.report "Rational#+" do |t| rat1 = 1/2r rat2 = 1/3r t.times { rat1 + rat2 } end x.report "Rational#-" do |t| rat1 = 1/3r rat2 = 1/2r t.times { rat1 - rat2 } end x.report "Rational#*" do |t| rat1 = 1/3r rat2 = 1/2r t.times { rat1 * rat2 } end end git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58922 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2017-05-27 08:41:02 +03:00
unsigned long u, v, t;
int shift;
if (x < 0)
x = -x;
if (y < 0)
y = -y;
if (x == 0)
return y;
if (y == 0)
return x;
Improve performance of some Time & Rational methods rational.c (i_gcd): replace GCD algorithm from Euclidean algorithm to Stein algorithm (https://en.wikipedia.org/wiki/Binary_GCD_algorithm). Some Time methods will call internal quov() function and it calls Rational#quo -> f_muldiv() -> i_gcd() in rational.c And some Rational methods also call i_gcd(). The implementation of Euclidean algorithm spent a long time at modulo operation (ie "x = y % x;"). The Stein algorithm will replace with shift operation which is faster than modulo. Time#subsec -> 36 % up Time#to_r -> 26 % up Rational#+ -> 14 % up Rational#- -> 15 % up Rational#* -> 13 % up [ruby-core:80843] [Bug #13503] [Fix GH-1596] ### Before Time#subsec 2.142M (± 9.8%) i/s - 10.659M in 5.022659s Time#to_r 2.003M (± 9.1%) i/s - 9.959M in 5.012445s Rational#+ 3.843M (± 0.9%) i/s - 19.274M in 5.016254s Rational#- 3.820M (± 1.3%) i/s - 19.149M in 5.014137s Rational#* 5.198M (± 1.4%) i/s - 26.016M in 5.005664s * After Time#subsec 2.902M (± 2.9%) i/s - 14.505M in 5.001815s Time#to_r 2.503M (± 4.8%) i/s - 12.512M in 5.011454s Rational#+ 4.390M (± 1.2%) i/s - 22.001M in 5.012413s Rational#- 4.391M (± 1.2%) i/s - 22.013M in 5.014584s Rational#* 5.872M (± 2.2%) i/s - 29.369M in 5.003666s * Test code require 'benchmark/ips' Benchmark.ips do |x| x.report "Time#subsec" do |t| time = Time.now t.times { time.subsec } end x.report "Time#to_r" do |t| time = Time.now t.times { time.to_r } end x.report "Rational#+" do |t| rat1 = 1/2r rat2 = 1/3r t.times { rat1 + rat2 } end x.report "Rational#-" do |t| rat1 = 1/3r rat2 = 1/2r t.times { rat1 - rat2 } end x.report "Rational#*" do |t| rat1 = 1/3r rat2 = 1/2r t.times { rat1 * rat2 } end end git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58922 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2017-05-27 08:41:02 +03:00
u = (unsigned long)x;
v = (unsigned long)y;
for (shift = 0; ((u | v) & 1) == 0; ++shift) {
u >>= 1;
v >>= 1;
}
Improve performance of some Time & Rational methods rational.c (i_gcd): replace GCD algorithm from Euclidean algorithm to Stein algorithm (https://en.wikipedia.org/wiki/Binary_GCD_algorithm). Some Time methods will call internal quov() function and it calls Rational#quo -> f_muldiv() -> i_gcd() in rational.c And some Rational methods also call i_gcd(). The implementation of Euclidean algorithm spent a long time at modulo operation (ie "x = y % x;"). The Stein algorithm will replace with shift operation which is faster than modulo. Time#subsec -> 36 % up Time#to_r -> 26 % up Rational#+ -> 14 % up Rational#- -> 15 % up Rational#* -> 13 % up [ruby-core:80843] [Bug #13503] [Fix GH-1596] ### Before Time#subsec 2.142M (± 9.8%) i/s - 10.659M in 5.022659s Time#to_r 2.003M (± 9.1%) i/s - 9.959M in 5.012445s Rational#+ 3.843M (± 0.9%) i/s - 19.274M in 5.016254s Rational#- 3.820M (± 1.3%) i/s - 19.149M in 5.014137s Rational#* 5.198M (± 1.4%) i/s - 26.016M in 5.005664s * After Time#subsec 2.902M (± 2.9%) i/s - 14.505M in 5.001815s Time#to_r 2.503M (± 4.8%) i/s - 12.512M in 5.011454s Rational#+ 4.390M (± 1.2%) i/s - 22.001M in 5.012413s Rational#- 4.391M (± 1.2%) i/s - 22.013M in 5.014584s Rational#* 5.872M (± 2.2%) i/s - 29.369M in 5.003666s * Test code require 'benchmark/ips' Benchmark.ips do |x| x.report "Time#subsec" do |t| time = Time.now t.times { time.subsec } end x.report "Time#to_r" do |t| time = Time.now t.times { time.to_r } end x.report "Rational#+" do |t| rat1 = 1/2r rat2 = 1/3r t.times { rat1 + rat2 } end x.report "Rational#-" do |t| rat1 = 1/3r rat2 = 1/2r t.times { rat1 - rat2 } end x.report "Rational#*" do |t| rat1 = 1/3r rat2 = 1/2r t.times { rat1 * rat2 } end end git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58922 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2017-05-27 08:41:02 +03:00
while ((u & 1) == 0)
u >>= 1;
do {
while ((v & 1) == 0)
v >>= 1;
if (u > v) {
t = v;
v = u;
u = t;
}
v = v - u;
} while (v != 0);
return (long)(u << shift);
}
inline static VALUE
f_gcd_normal(VALUE x, VALUE y)
{
VALUE z;
if (FIXNUM_P(x) && FIXNUM_P(y))
return LONG2NUM(i_gcd(FIX2LONG(x), FIX2LONG(y)));
if (INT_NEGATIVE_P(x))
x = rb_int_uminus(x);
if (INT_NEGATIVE_P(y))
y = rb_int_uminus(y);
if (INT_ZERO_P(x))
return y;
if (INT_ZERO_P(y))
return x;
for (;;) {
if (FIXNUM_P(x)) {
if (FIXNUM_ZERO_P(x))
return y;
if (FIXNUM_P(y))
return LONG2NUM(i_gcd(FIX2LONG(x), FIX2LONG(y)));
}
z = x;
x = rb_int_modulo(y, x);
y = z;
}
/* NOTREACHED */
}
VALUE
rb_gcd_normal(VALUE x, VALUE y)
{
return f_gcd_normal(x, y);
}
inline static VALUE
f_gcd(VALUE x, VALUE y)
{
#ifdef USE_GMP
if (RB_TYPE_P(x, T_BIGNUM) && RB_TYPE_P(y, T_BIGNUM)) {
size_t xn = BIGNUM_LEN(x);
size_t yn = BIGNUM_LEN(y);
if (GMP_GCD_DIGITS <= xn || GMP_GCD_DIGITS <= yn)
return rb_gcd_gmp(x, y);
}
#endif
return f_gcd_normal(x, y);
}
#ifndef NDEBUG
#undef f_gcd
inline static VALUE
f_gcd(VALUE x, VALUE y)
{
VALUE r = f_gcd_orig(x, y);
if (f_nonzero_p(r)) {
assert(f_zero_p(f_mod(x, r)));
assert(f_zero_p(f_mod(y, r)));
}
return r;
}
#endif
inline static VALUE
f_lcm(VALUE x, VALUE y)
{
if (INT_ZERO_P(x) || INT_ZERO_P(y))
return ZERO;
return f_abs(f_mul(f_div(x, f_gcd(x, y)), y));
}
#define get_dat1(x) \
struct RRational *dat = RRATIONAL(x)
#define get_dat2(x,y) \
struct RRational *adat = RRATIONAL(x), *bdat = RRATIONAL(y)
inline static VALUE
nurat_s_new_internal(VALUE klass, VALUE num, VALUE den)
{
* gc.c: support RGENGC. [ruby-trunk - Feature #8339] See this ticet about RGENGC. * gc.c: Add several flags: * RGENGC_DEBUG: if >0, then prints debug information. * RGENGC_CHECK_MODE: if >0, add assertions. * RGENGC_PROFILE: if >0, add profiling features. check GC.stat and GC::Profiler. * include/ruby/ruby.h: disable RGENGC by default (USE_RGENGC == 0). * array.c: add write barriers for T_ARRAY and generate sunny objects. * include/ruby/ruby.h (RARRAY_PTR_USE): added. Use this macro if you want to access raw pointers. If you modify the contents which pointer pointed, then you need to care write barrier. * bignum.c, marshal.c, random.c: generate T_BIGNUM sunny objects. * complex.c, include/ruby/ruby.h: add write barriers for T_COMPLEX and generate sunny objects. * rational.c (nurat_s_new_internal), include/ruby/ruby.h: add write barriers for T_RATIONAL and generate sunny objects. * internal.h: add write barriers for RBasic::klass. * numeric.c (rb_float_new_in_heap): generate sunny T_FLOAT objects. * object.c (rb_class_allocate_instance), range.c: generate sunny T_OBJECT objects. * string.c: add write barriers for T_STRING and generate sunny objects. * variable.c: add write barriers for ivars. * vm_insnhelper.c (vm_setivar): ditto. * include/ruby/ruby.h, debug.c: use two flags FL_WB_PROTECTED and FL_OLDGEN. * node.h (NODE_FL_CREF_PUSHED_BY_EVAL, NODE_FL_CREF_OMOD_SHARED): move flag bits. git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@40703 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2013-05-13 22:07:47 +04:00
NEWOBJ_OF(obj, struct RRational, klass, T_RATIONAL | (RGENGC_WB_PROTECTED_RATIONAL ? FL_WB_PROTECTED : 0));
RATIONAL_SET_NUM((VALUE)obj, num);
RATIONAL_SET_DEN((VALUE)obj, den);
OBJ_FREEZE_RAW((VALUE)obj);
return (VALUE)obj;
}
static VALUE
nurat_s_alloc(VALUE klass)
{
return nurat_s_new_internal(klass, ZERO, ONE);
}
inline static VALUE
f_rational_new_bang1(VALUE klass, VALUE x)
{
return nurat_s_new_internal(klass, x, ONE);
}
#ifdef CANONICALIZATION_FOR_MATHN
static int canonicalization = 0;
RUBY_FUNC_EXPORTED void
nurat_canonicalization(int f)
{
canonicalization = f;
}
#else
# define canonicalization 0
#endif
inline static void
nurat_int_check(VALUE num)
{
if (!RB_INTEGER_TYPE_P(num)) {
if (!k_numeric_p(num) || !f_integer_p(num))
rb_raise(rb_eTypeError, "not an integer");
}
}
inline static VALUE
nurat_int_value(VALUE num)
{
nurat_int_check(num);
if (!k_integer_p(num))
num = f_to_i(num);
return num;
}
static void
nurat_canonicalize(VALUE *num, VALUE *den)
{
assert(num); assert(RB_INTEGER_TYPE_P(*num));
assert(den); assert(RB_INTEGER_TYPE_P(*den));
if (INT_NEGATIVE_P(*den)) {
*num = rb_int_uminus(*num);
*den = rb_int_uminus(*den);
}
else if (INT_ZERO_P(*den)) {
rb_num_zerodiv();
}
}
static void
nurat_reduce(VALUE *x, VALUE *y)
{
VALUE gcd;
if (*x == ONE || *y == ONE) return;
gcd = f_gcd(*x, *y);
*x = f_idiv(*x, gcd);
*y = f_idiv(*y, gcd);
}
inline static VALUE
nurat_s_canonicalize_internal(VALUE klass, VALUE num, VALUE den)
{
nurat_canonicalize(&num, &den);
nurat_reduce(&num, &den);
if (canonicalization && f_one_p(den))
return num;
return nurat_s_new_internal(klass, num, den);
}
inline static VALUE
nurat_s_canonicalize_internal_no_reduce(VALUE klass, VALUE num, VALUE den)
{
nurat_canonicalize(&num, &den);
if (canonicalization && f_one_p(den))
return num;
return nurat_s_new_internal(klass, num, den);
}
inline static VALUE
f_rational_new2(VALUE klass, VALUE x, VALUE y)
{
assert(!k_rational_p(x));
assert(!k_rational_p(y));
return nurat_s_canonicalize_internal(klass, x, y);
}
inline static VALUE
f_rational_new_no_reduce2(VALUE klass, VALUE x, VALUE y)
{
assert(!k_rational_p(x));
assert(!k_rational_p(y));
return nurat_s_canonicalize_internal_no_reduce(klass, x, y);
}
static VALUE nurat_convert(VALUE klass, VALUE numv, VALUE denv, int raise);
static VALUE nurat_s_convert(int argc, VALUE *argv, VALUE klass);
/*
* call-seq:
* Rational(x, y, exception: true) -> rational or nil
* Rational(arg, exception: true) -> rational or nil
*
* Returns +x/y+ or +arg+ as a Rational.
*
* Rational(2, 3) #=> (2/3)
* Rational(5) #=> (5/1)
* Rational(0.5) #=> (1/2)
* Rational(0.3) #=> (5404319552844595/18014398509481984)
*
* Rational("2/3") #=> (2/3)
* Rational("0.3") #=> (3/10)
*
* Rational("10 cents") #=> ArgumentError
* Rational(nil) #=> TypeError
* Rational(1, nil) #=> TypeError
*
* Rational("10 cents", exception: false) #=> nil
*
* Syntax of the string form:
*
* string form = extra spaces , rational , extra spaces ;
* rational = [ sign ] , unsigned rational ;
* unsigned rational = numerator | numerator , "/" , denominator ;
* numerator = integer part | fractional part | integer part , fractional part ;
* denominator = digits ;
* integer part = digits ;
* fractional part = "." , digits , [ ( "e" | "E" ) , [ sign ] , digits ] ;
* sign = "-" | "+" ;
* digits = digit , { digit | "_" , digit } ;
* digit = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" | "8" | "9" ;
* extra spaces = ? \s* ? ;
*
* See also String#to_r.
*/
static VALUE
nurat_f_rational(int argc, VALUE *argv, VALUE klass)
{
VALUE a1, a2, opts = Qnil;
int raise = TRUE;
if (rb_scan_args(argc, argv, "11:", &a1, &a2, &opts) == 1) {
a2 = Qundef;
}
if (!NIL_P(opts)) {
raise = rb_opts_exception_p(opts, raise);
}
return nurat_convert(rb_cRational, a1, a2, raise);
}
/*
* call-seq:
* rat.numerator -> integer
*
* Returns the numerator.
*
* Rational(7).numerator #=> 7
* Rational(7, 1).numerator #=> 7
* Rational(9, -4).numerator #=> -9
* Rational(-2, -10).numerator #=> 1
*/
static VALUE
nurat_numerator(VALUE self)
{
get_dat1(self);
return dat->num;
}
/*
* call-seq:
* rat.denominator -> integer
*
* Returns the denominator (always positive).
*
* Rational(7).denominator #=> 1
* Rational(7, 1).denominator #=> 1
* Rational(9, -4).denominator #=> 4
* Rational(-2, -10).denominator #=> 5
*/
static VALUE
nurat_denominator(VALUE self)
{
get_dat1(self);
return dat->den;
}
/*
* call-seq:
* -rat -> rational
*
* Negates +rat+.
*/
VALUE
rb_rational_uminus(VALUE self)
{
const int unused = (assert(RB_TYPE_P(self, T_RATIONAL)), 0);
get_dat1(self);
(void)unused;
return f_rational_new2(CLASS_OF(self), rb_int_uminus(dat->num), dat->den);
}
#ifndef NDEBUG
#define f_imul f_imul_orig
#endif
inline static VALUE
f_imul(long a, long b)
{
VALUE r;
if (a == 0 || b == 0)
return ZERO;
else if (a == 1)
return LONG2NUM(b);
else if (b == 1)
return LONG2NUM(a);
if (MUL_OVERFLOW_LONG_P(a, b))
r = rb_big_mul(rb_int2big(a), rb_int2big(b));
else
r = LONG2NUM(a * b);
return r;
}
#ifndef NDEBUG
#undef f_imul
inline static VALUE
f_imul(long x, long y)
{
VALUE r = f_imul_orig(x, y);
assert(f_eqeq_p(r, f_mul(LONG2NUM(x), LONG2NUM(y))));
return r;
}
#endif
inline static VALUE
f_addsub(VALUE self, VALUE anum, VALUE aden, VALUE bnum, VALUE bden, int k)
{
VALUE num, den;
if (FIXNUM_P(anum) && FIXNUM_P(aden) &&
FIXNUM_P(bnum) && FIXNUM_P(bden)) {
long an = FIX2LONG(anum);
long ad = FIX2LONG(aden);
long bn = FIX2LONG(bnum);
long bd = FIX2LONG(bden);
long ig = i_gcd(ad, bd);
VALUE g = LONG2NUM(ig);
VALUE a = f_imul(an, bd / ig);
VALUE b = f_imul(bn, ad / ig);
VALUE c;
if (k == '+')
c = rb_int_plus(a, b);
else
c = rb_int_minus(a, b);
b = rb_int_idiv(aden, g);
g = f_gcd(c, g);
num = rb_int_idiv(c, g);
a = rb_int_idiv(bden, g);
den = rb_int_mul(a, b);
}
else if (RB_INTEGER_TYPE_P(anum) && RB_INTEGER_TYPE_P(aden) &&
RB_INTEGER_TYPE_P(bnum) && RB_INTEGER_TYPE_P(bden)) {
VALUE g = f_gcd(aden, bden);
VALUE a = rb_int_mul(anum, rb_int_idiv(bden, g));
VALUE b = rb_int_mul(bnum, rb_int_idiv(aden, g));
VALUE c;
if (k == '+')
c = rb_int_plus(a, b);
else
c = rb_int_minus(a, b);
b = rb_int_idiv(aden, g);
g = f_gcd(c, g);
num = rb_int_idiv(c, g);
a = rb_int_idiv(bden, g);
den = rb_int_mul(a, b);
}
else {
double a = NUM2DBL(anum) / NUM2DBL(aden);
double b = NUM2DBL(bnum) / NUM2DBL(bden);
double c = k == '+' ? a + b : a - b;
return DBL2NUM(c);
}
return f_rational_new_no_reduce2(CLASS_OF(self), num, den);
}
static double nurat_to_double(VALUE self);
/*
* call-seq:
* rat + numeric -> numeric
*
* Performs addition.
*
* Rational(2, 3) + Rational(2, 3) #=> (4/3)
* Rational(900) + Rational(1) #=> (901/1)
* Rational(-2, 9) + Rational(-9, 2) #=> (-85/18)
* Rational(9, 8) + 4 #=> (41/8)
* Rational(20, 9) + 9.8 #=> 12.022222222222222
*/
VALUE
rb_rational_plus(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
{
get_dat1(self);
return f_rational_new_no_reduce2(CLASS_OF(self),
rb_int_plus(dat->num, rb_int_mul(other, dat->den)),
dat->den);
}
}
else if (RB_FLOAT_TYPE_P(other)) {
return DBL2NUM(nurat_to_double(self) + RFLOAT_VALUE(other));
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
{
get_dat2(self, other);
return f_addsub(self,
adat->num, adat->den,
bdat->num, bdat->den, '+');
}
}
else {
return rb_num_coerce_bin(self, other, '+');
}
}
/*
* call-seq:
* rat - numeric -> numeric
*
* Performs subtraction.
*
* Rational(2, 3) - Rational(2, 3) #=> (0/1)
* Rational(900) - Rational(1) #=> (899/1)
* Rational(-2, 9) - Rational(-9, 2) #=> (77/18)
* Rational(9, 8) - 4 #=> (-23/8)
* Rational(20, 9) - 9.8 #=> -7.577777777777778
*/
static VALUE
nurat_sub(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
{
get_dat1(self);
return f_rational_new_no_reduce2(CLASS_OF(self),
rb_int_minus(dat->num, rb_int_mul(other, dat->den)),
dat->den);
}
}
else if (RB_FLOAT_TYPE_P(other)) {
return DBL2NUM(nurat_to_double(self) - RFLOAT_VALUE(other));
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
{
get_dat2(self, other);
return f_addsub(self,
adat->num, adat->den,
bdat->num, bdat->den, '-');
}
}
else {
return rb_num_coerce_bin(self, other, '-');
}
}
inline static VALUE
f_muldiv(VALUE self, VALUE anum, VALUE aden, VALUE bnum, VALUE bden, int k)
{
VALUE num, den;
assert(RB_TYPE_P(self, T_RATIONAL));
/* Integer#** can return Rational with Float right now */
if (RB_FLOAT_TYPE_P(anum) || RB_FLOAT_TYPE_P(aden) ||
RB_FLOAT_TYPE_P(bnum) || RB_FLOAT_TYPE_P(bden)) {
double an = NUM2DBL(anum), ad = NUM2DBL(aden);
double bn = NUM2DBL(bnum), bd = NUM2DBL(bden);
double x = (an * bn) / (ad * bd);
return DBL2NUM(x);
}
assert(RB_INTEGER_TYPE_P(anum));
assert(RB_INTEGER_TYPE_P(aden));
assert(RB_INTEGER_TYPE_P(bnum));
assert(RB_INTEGER_TYPE_P(bden));
if (k == '/') {
VALUE t;
if (INT_NEGATIVE_P(bnum)) {
anum = rb_int_uminus(anum);
bnum = rb_int_uminus(bnum);
}
t = bnum;
bnum = bden;
bden = t;
}
if (FIXNUM_P(anum) && FIXNUM_P(aden) &&
FIXNUM_P(bnum) && FIXNUM_P(bden)) {
long an = FIX2LONG(anum);
long ad = FIX2LONG(aden);
long bn = FIX2LONG(bnum);
long bd = FIX2LONG(bden);
long g1 = i_gcd(an, bd);
long g2 = i_gcd(ad, bn);
num = f_imul(an / g1, bn / g2);
den = f_imul(ad / g2, bd / g1);
}
else {
VALUE g1 = f_gcd(anum, bden);
VALUE g2 = f_gcd(aden, bnum);
num = rb_int_mul(rb_int_idiv(anum, g1), rb_int_idiv(bnum, g2));
den = rb_int_mul(rb_int_idiv(aden, g2), rb_int_idiv(bden, g1));
}
return f_rational_new_no_reduce2(CLASS_OF(self), num, den);
}
/*
* call-seq:
* rat * numeric -> numeric
*
* Performs multiplication.
*
* Rational(2, 3) * Rational(2, 3) #=> (4/9)
* Rational(900) * Rational(1) #=> (900/1)
* Rational(-2, 9) * Rational(-9, 2) #=> (1/1)
* Rational(9, 8) * 4 #=> (9/2)
* Rational(20, 9) * 9.8 #=> 21.77777777777778
*/
complex.c: Optimize Complex#* and Complex#** Optimize f_mul for the core numeric class components. This change improves the computation time of Complex#* and Complex#**. ``` $ make benchmark ITEM=complex_float_ COMPARE_RUBY=/Users/mrkn/.rbenv/versions/2.6.0/bin/ruby generating known_errors.inc known_errors.inc unchanged /Users/mrkn/src/github.com/ruby/ruby/revision.h unchanged /Users/mrkn/.rbenv/shims/ruby --disable=gems -rrubygems -I/Users/mrkn/src/github.com/ruby/ruby/benchmark/lib /Users/mrkn/src/github.com/ruby/ruby/benchmark/benchmark-driver/exe/benchmark-driver \ --executables="compare-ruby::/Users/mrkn/.rbenv/versions/2.6.0/bin/ruby -I.ext/common --disable-gem" \ --executables="built-ruby::./miniruby -I/Users/mrkn/src/github.com/ruby/ruby/lib -I. -I.ext/common -r/Users/mrkn/src/github.com/ruby/ruby/prelude --disable-gem" \ $(find /Users/mrkn/src/github.com/ruby/ruby/benchmark -maxdepth 1 -name '*complex_float_*.yml' -o -name '*complex_float_*.rb' | sort) Calculating ------------------------------------- compare-ruby built-ruby complex_float_add 6.558M 13.012M i/s - 1.000M times in 0.152480s 0.076850s complex_float_div 576.821k 567.969k i/s - 1.000M times in 1.733640s 1.760660s complex_float_mul 1.690M 2.628M i/s - 1.000M times in 0.591786s 0.380579s complex_float_new 1.350M 1.268M i/s - 1.000M times in 0.740669s 0.788762s complex_float_power 1.571M 1.835M i/s - 1.000M times in 0.636507s 0.544909s complex_float_sub 8.635M 8.779M i/s - 1.000M times in 0.115814s 0.113906s Comparison: complex_float_add built-ruby: 13012361.7 i/s compare-ruby: 6558237.1 i/s - 1.98x slower complex_float_div compare-ruby: 576821.0 i/s built-ruby: 567968.8 i/s - 1.02x slower complex_float_mul built-ruby: 2627575.4 i/s compare-ruby: 1689800.0 i/s - 1.55x slower complex_float_new compare-ruby: 1350130.8 i/s built-ruby: 1267809.6 i/s - 1.06x slower complex_float_power built-ruby: 1835168.8 i/s compare-ruby: 1571074.6 i/s - 1.17x slower complex_float_sub built-ruby: 8779168.8 i/s compare-ruby: 8634534.7 i/s - 1.02x slower ``` git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66697 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2019-01-03 09:19:17 +03:00
VALUE
rb_rational_mul(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
{
get_dat1(self);
return f_muldiv(self,
dat->num, dat->den,
other, ONE, '*');
}
}
else if (RB_FLOAT_TYPE_P(other)) {
return DBL2NUM(nurat_to_double(self) * RFLOAT_VALUE(other));
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
{
get_dat2(self, other);
return f_muldiv(self,
adat->num, adat->den,
bdat->num, bdat->den, '*');
}
}
else {
return rb_num_coerce_bin(self, other, '*');
}
}
/*
* call-seq:
* rat / numeric -> numeric
* rat.quo(numeric) -> numeric
*
* Performs division.
*
* Rational(2, 3) / Rational(2, 3) #=> (1/1)
* Rational(900) / Rational(1) #=> (900/1)
* Rational(-2, 9) / Rational(-9, 2) #=> (4/81)
* Rational(9, 8) / 4 #=> (9/32)
* Rational(20, 9) / 9.8 #=> 0.22675736961451246
*/
static VALUE
nurat_div(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
if (f_zero_p(other))
rb_num_zerodiv();
{
get_dat1(self);
return f_muldiv(self,
dat->num, dat->den,
other, ONE, '/');
}
}
else if (RB_FLOAT_TYPE_P(other)) {
VALUE v = nurat_to_f(self);
return rb_flo_div_flo(v, other);
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
if (f_zero_p(other))
rb_num_zerodiv();
{
get_dat2(self, other);
if (f_one_p(self))
return f_rational_new_no_reduce2(CLASS_OF(self),
bdat->den, bdat->num);
return f_muldiv(self,
adat->num, adat->den,
bdat->num, bdat->den, '/');
}
}
else {
return rb_num_coerce_bin(self, other, '/');
}
}
/*
* call-seq:
* rat.fdiv(numeric) -> float
*
* Performs division and returns the value as a Float.
*
* Rational(2, 3).fdiv(1) #=> 0.6666666666666666
* Rational(2, 3).fdiv(0.5) #=> 1.3333333333333333
* Rational(2).fdiv(3) #=> 0.6666666666666666
*/
static VALUE
nurat_fdiv(VALUE self, VALUE other)
{
VALUE div;
if (f_zero_p(other))
return nurat_div(self, rb_float_new(0.0));
if (FIXNUM_P(other) && other == LONG2FIX(1))
return nurat_to_f(self);
div = nurat_div(self, other);
if (RB_TYPE_P(div, T_RATIONAL))
return nurat_to_f(div);
if (RB_FLOAT_TYPE_P(div))
return div;
return rb_funcall(div, idTo_f, 0);
}
inline static VALUE
f_odd_p(VALUE integer)
{
if (rb_funcall(integer, '%', 1, INT2FIX(2)) != INT2FIX(0)) {
return Qtrue;
}
return Qfalse;
}
/*
* call-seq:
* rat ** numeric -> numeric
*
* Performs exponentiation.
*
* Rational(2) ** Rational(3) #=> (8/1)
* Rational(10) ** -2 #=> (1/100)
* Rational(10) ** -2.0 #=> 0.01
* Rational(-4) ** Rational(1, 2) #=> (0.0+2.0i)
* Rational(1, 2) ** 0 #=> (1/1)
* Rational(1, 2) ** 0.0 #=> 1.0
*/
VALUE
rb_rational_pow(VALUE self, VALUE other)
{
if (k_numeric_p(other) && k_exact_zero_p(other))
return f_rational_new_bang1(CLASS_OF(self), ONE);
if (k_rational_p(other)) {
get_dat1(other);
if (f_one_p(dat->den))
other = dat->num; /* c14n */
}
/* Deal with special cases of 0**n and 1**n */
if (k_numeric_p(other) && k_exact_p(other)) {
get_dat1(self);
if (f_one_p(dat->den)) {
if (f_one_p(dat->num)) {
return f_rational_new_bang1(CLASS_OF(self), ONE);
}
else if (f_minus_one_p(dat->num) && RB_INTEGER_TYPE_P(other)) {
return f_rational_new_bang1(CLASS_OF(self), INT2FIX(f_odd_p(other) ? -1 : 1));
}
else if (INT_ZERO_P(dat->num)) {
if (rb_num_negative_p(other)) {
rb_num_zerodiv();
}
else {
return f_rational_new_bang1(CLASS_OF(self), ZERO);
}
}
}
}
/* General case */
if (FIXNUM_P(other)) {
{
VALUE num, den;
get_dat1(self);
if (INT_POSITIVE_P(other)) {
num = rb_int_pow(dat->num, other);
den = rb_int_pow(dat->den, other);
}
else if (INT_NEGATIVE_P(other)) {
num = rb_int_pow(dat->den, rb_int_uminus(other));
den = rb_int_pow(dat->num, rb_int_uminus(other));
}
else {
num = ONE;
den = ONE;
}
if (RB_FLOAT_TYPE_P(num)) { /* infinity due to overflow */
if (RB_FLOAT_TYPE_P(den))
return DBL2NUM(nan(""));
return num;
}
if (RB_FLOAT_TYPE_P(den)) { /* infinity due to overflow */
num = ZERO;
den = ONE;
}
return f_rational_new2(CLASS_OF(self), num, den);
}
}
else if (RB_TYPE_P(other, T_BIGNUM)) {
rb_warn("in a**b, b may be too big");
return rb_float_pow(nurat_to_f(self), other);
}
else if (RB_FLOAT_TYPE_P(other) || RB_TYPE_P(other, T_RATIONAL)) {
return rb_float_pow(nurat_to_f(self), other);
}
else {
return rb_num_coerce_bin(self, other, rb_intern("**"));
}
}
#define nurat_expt rb_rational_pow
/*
* call-seq:
* rational <=> numeric -> -1, 0, +1, or nil
*
* Returns -1, 0, or +1 depending on whether +rational+ is
* less than, equal to, or greater than +numeric+.
*
* +nil+ is returned if the two values are incomparable.
*
* Rational(2, 3) <=> Rational(2, 3) #=> 0
* Rational(5) <=> 5 #=> 0
* Rational(2, 3) <=> Rational(1, 3) #=> 1
* Rational(1, 3) <=> 1 #=> -1
* Rational(1, 3) <=> 0.3 #=> 1
*
* Rational(1, 3) <=> "0.3" #=> nil
*/
VALUE
rb_rational_cmp(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
{
get_dat1(self);
if (dat->den == LONG2FIX(1))
return rb_int_cmp(dat->num, other); /* c14n */
other = f_rational_new_bang1(CLASS_OF(self), other);
goto other_is_rational;
}
}
else if (RB_FLOAT_TYPE_P(other)) {
return rb_dbl_cmp(nurat_to_double(self), RFLOAT_VALUE(other));
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
other_is_rational:
{
VALUE num1, num2;
get_dat2(self, other);
if (FIXNUM_P(adat->num) && FIXNUM_P(adat->den) &&
FIXNUM_P(bdat->num) && FIXNUM_P(bdat->den)) {
num1 = f_imul(FIX2LONG(adat->num), FIX2LONG(bdat->den));
num2 = f_imul(FIX2LONG(bdat->num), FIX2LONG(adat->den));
}
else {
num1 = rb_int_mul(adat->num, bdat->den);
num2 = rb_int_mul(bdat->num, adat->den);
}
return rb_int_cmp(rb_int_minus(num1, num2), ZERO);
}
}
else {
return rb_num_coerce_cmp(self, other, rb_intern("<=>"));
}
}
/*
* call-seq:
* rat == object -> true or false
*
* Returns +true+ if +rat+ equals +object+ numerically.
*
* Rational(2, 3) == Rational(2, 3) #=> true
* Rational(5) == 5 #=> true
* Rational(0) == 0.0 #=> true
* Rational('1/3') == 0.33 #=> false
* Rational('1/2') == '1/2' #=> false
*/
static VALUE
nurat_eqeq_p(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
get_dat1(self);
if (RB_INTEGER_TYPE_P(dat->num) && RB_INTEGER_TYPE_P(dat->den)) {
if (INT_ZERO_P(dat->num) && INT_ZERO_P(other))
return Qtrue;
if (!FIXNUM_P(dat->den))
return Qfalse;
if (FIX2LONG(dat->den) != 1)
return Qfalse;
return rb_int_equal(dat->num, other);
}
else {
const double d = nurat_to_double(self);
return f_boolcast(FIXNUM_ZERO_P(rb_dbl_cmp(d, NUM2DBL(other))));
}
}
else if (RB_FLOAT_TYPE_P(other)) {
const double d = nurat_to_double(self);
return f_boolcast(FIXNUM_ZERO_P(rb_dbl_cmp(d, RFLOAT_VALUE(other))));
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
{
get_dat2(self, other);
if (INT_ZERO_P(adat->num) && INT_ZERO_P(bdat->num))
return Qtrue;
return f_boolcast(rb_int_equal(adat->num, bdat->num) &&
rb_int_equal(adat->den, bdat->den));
}
}
else {
return rb_equal(other, self);
}
}
/* :nodoc: */
static VALUE
nurat_coerce(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
return rb_assoc_new(f_rational_new_bang1(CLASS_OF(self), other), self);
}
else if (RB_FLOAT_TYPE_P(other)) {
return rb_assoc_new(other, nurat_to_f(self));
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
return rb_assoc_new(other, self);
}
else if (RB_TYPE_P(other, T_COMPLEX)) {
if (k_exact_zero_p(RCOMPLEX(other)->imag))
return rb_assoc_new(f_rational_new_bang1
(CLASS_OF(self), RCOMPLEX(other)->real), self);
else
return rb_assoc_new(other, rb_Complex(self, INT2FIX(0)));
}
rb_raise(rb_eTypeError, "%s can't be coerced into %s",
rb_obj_classname(other), rb_obj_classname(self));
return Qnil;
}
/*
* call-seq:
* rat.positive? -> true or false
*
* Returns +true+ if +rat+ is greater than 0.
*/
static VALUE
nurat_positive_p(VALUE self)
{
get_dat1(self);
return f_boolcast(INT_POSITIVE_P(dat->num));
}
/*
* call-seq:
* rat.negative? -> true or false
*
* Returns +true+ if +rat+ is less than 0.
*/
static VALUE
nurat_negative_p(VALUE self)
{
get_dat1(self);
return f_boolcast(INT_NEGATIVE_P(dat->num));
}
/*
* call-seq:
* rat.abs -> rational
* rat.magnitude -> rational
*
* Returns the absolute value of +rat+.
*
* (1/2r).abs #=> (1/2)
* (-1/2r).abs #=> (1/2)
*
* Rational#magnitude is an alias for Rational#abs.
*/
VALUE
rb_rational_abs(VALUE self)
{
get_dat1(self);
if (INT_NEGATIVE_P(dat->num)) {
VALUE num = rb_int_abs(dat->num);
return nurat_s_canonicalize_internal_no_reduce(CLASS_OF(self), num, dat->den);
}
return self;
}
static VALUE
nurat_floor(VALUE self)
{
get_dat1(self);
return rb_int_idiv(dat->num, dat->den);
}
static VALUE
nurat_ceil(VALUE self)
{
get_dat1(self);
return rb_int_uminus(rb_int_idiv(rb_int_uminus(dat->num), dat->den));
}
/*
* call-seq:
* rat.to_i -> integer
*
* Returns the truncated value as an integer.
*
* Equivalent to Rational#truncate.
*
* Rational(2, 3).to_i #=> 0
* Rational(3).to_i #=> 3
* Rational(300.6).to_i #=> 300
* Rational(98, 71).to_i #=> 1
* Rational(-31, 2).to_i #=> -15
*/
static VALUE
nurat_truncate(VALUE self)
{
get_dat1(self);
if (INT_NEGATIVE_P(dat->num))
return rb_int_uminus(rb_int_idiv(rb_int_uminus(dat->num), dat->den));
return rb_int_idiv(dat->num, dat->den);
}
static VALUE
nurat_round_half_up(VALUE self)
{
VALUE num, den, neg;
get_dat1(self);
num = dat->num;
den = dat->den;
neg = INT_NEGATIVE_P(num);
if (neg)
num = rb_int_uminus(num);
num = rb_int_plus(rb_int_mul(num, TWO), den);
den = rb_int_mul(den, TWO);
num = rb_int_idiv(num, den);
if (neg)
num = rb_int_uminus(num);
return num;
}
static VALUE
nurat_round_half_down(VALUE self)
{
VALUE num, den, neg;
get_dat1(self);
num = dat->num;
den = dat->den;
neg = INT_NEGATIVE_P(num);
if (neg)
num = rb_int_uminus(num);
num = rb_int_plus(rb_int_mul(num, TWO), den);
num = rb_int_minus(num, ONE);
den = rb_int_mul(den, TWO);
num = rb_int_idiv(num, den);
if (neg)
num = rb_int_uminus(num);
return num;
}
static VALUE
nurat_round_half_even(VALUE self)
{
VALUE num, den, neg, qr;
get_dat1(self);
num = dat->num;
den = dat->den;
neg = INT_NEGATIVE_P(num);
if (neg)
num = rb_int_uminus(num);
num = rb_int_plus(rb_int_mul(num, TWO), den);
den = rb_int_mul(den, TWO);
qr = rb_int_divmod(num, den);
num = RARRAY_AREF(qr, 0);
if (INT_ZERO_P(RARRAY_AREF(qr, 1)))
num = rb_int_and(num, LONG2FIX(((int)~1)));
if (neg)
num = rb_int_uminus(num);
return num;
}
static VALUE
f_round_common(int argc, VALUE *argv, VALUE self, VALUE (*func)(VALUE))
{
VALUE n, b, s;
if (rb_check_arity(argc, 0, 1) == 0)
return (*func)(self);
n = argv[0];
if (!k_integer_p(n))
rb_raise(rb_eTypeError, "not an integer");
b = f_expt10(n);
complex.c: Optimize Complex#* and Complex#** Optimize f_mul for the core numeric class components. This change improves the computation time of Complex#* and Complex#**. ``` $ make benchmark ITEM=complex_float_ COMPARE_RUBY=/Users/mrkn/.rbenv/versions/2.6.0/bin/ruby generating known_errors.inc known_errors.inc unchanged /Users/mrkn/src/github.com/ruby/ruby/revision.h unchanged /Users/mrkn/.rbenv/shims/ruby --disable=gems -rrubygems -I/Users/mrkn/src/github.com/ruby/ruby/benchmark/lib /Users/mrkn/src/github.com/ruby/ruby/benchmark/benchmark-driver/exe/benchmark-driver \ --executables="compare-ruby::/Users/mrkn/.rbenv/versions/2.6.0/bin/ruby -I.ext/common --disable-gem" \ --executables="built-ruby::./miniruby -I/Users/mrkn/src/github.com/ruby/ruby/lib -I. -I.ext/common -r/Users/mrkn/src/github.com/ruby/ruby/prelude --disable-gem" \ $(find /Users/mrkn/src/github.com/ruby/ruby/benchmark -maxdepth 1 -name '*complex_float_*.yml' -o -name '*complex_float_*.rb' | sort) Calculating ------------------------------------- compare-ruby built-ruby complex_float_add 6.558M 13.012M i/s - 1.000M times in 0.152480s 0.076850s complex_float_div 576.821k 567.969k i/s - 1.000M times in 1.733640s 1.760660s complex_float_mul 1.690M 2.628M i/s - 1.000M times in 0.591786s 0.380579s complex_float_new 1.350M 1.268M i/s - 1.000M times in 0.740669s 0.788762s complex_float_power 1.571M 1.835M i/s - 1.000M times in 0.636507s 0.544909s complex_float_sub 8.635M 8.779M i/s - 1.000M times in 0.115814s 0.113906s Comparison: complex_float_add built-ruby: 13012361.7 i/s compare-ruby: 6558237.1 i/s - 1.98x slower complex_float_div compare-ruby: 576821.0 i/s built-ruby: 567968.8 i/s - 1.02x slower complex_float_mul built-ruby: 2627575.4 i/s compare-ruby: 1689800.0 i/s - 1.55x slower complex_float_new compare-ruby: 1350130.8 i/s built-ruby: 1267809.6 i/s - 1.06x slower complex_float_power built-ruby: 1835168.8 i/s compare-ruby: 1571074.6 i/s - 1.17x slower complex_float_sub built-ruby: 8779168.8 i/s compare-ruby: 8634534.7 i/s - 1.02x slower ``` git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66697 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2019-01-03 09:19:17 +03:00
s = rb_rational_mul(self, b);
if (k_float_p(s)) {
if (INT_NEGATIVE_P(n))
return ZERO;
return self;
}
if (!k_rational_p(s)) {
s = f_rational_new_bang1(CLASS_OF(self), s);
}
s = (*func)(s);
s = nurat_div(f_rational_new_bang1(CLASS_OF(self), s), b);
if (RB_TYPE_P(s, T_RATIONAL) && FIX2INT(rb_int_cmp(n, ONE)) < 0)
s = nurat_truncate(s);
return s;
}
/*
* call-seq:
* rat.floor([ndigits]) -> integer or rational
*
* Returns the largest number less than or equal to +rat+ with
* a precision of +ndigits+ decimal digits (default: 0).
*
* When the precision is negative, the returned value is an integer
* with at least <code>ndigits.abs</code> trailing zeros.
*
* Returns a rational when +ndigits+ is positive,
* otherwise returns an integer.
*
* Rational(3).floor #=> 3
* Rational(2, 3).floor #=> 0
* Rational(-3, 2).floor #=> -2
*
* # decimal - 1 2 3 . 4 5 6
* # ^ ^ ^ ^ ^ ^
* # precision -3 -2 -1 0 +1 +2
*
* Rational('-123.456').floor(+1).to_f #=> -123.5
* Rational('-123.456').floor(-1) #=> -130
*/
static VALUE
nurat_floor_n(int argc, VALUE *argv, VALUE self)
{
return f_round_common(argc, argv, self, nurat_floor);
}
/*
* call-seq:
* rat.ceil([ndigits]) -> integer or rational
*
* Returns the smallest number greater than or equal to +rat+ with
* a precision of +ndigits+ decimal digits (default: 0).
*
* When the precision is negative, the returned value is an integer
* with at least <code>ndigits.abs</code> trailing zeros.
*
* Returns a rational when +ndigits+ is positive,
* otherwise returns an integer.
*
* Rational(3).ceil #=> 3
* Rational(2, 3).ceil #=> 1
* Rational(-3, 2).ceil #=> -1
*
* # decimal - 1 2 3 . 4 5 6
* # ^ ^ ^ ^ ^ ^
* # precision -3 -2 -1 0 +1 +2
*
* Rational('-123.456').ceil(+1).to_f #=> -123.4
* Rational('-123.456').ceil(-1) #=> -120
*/
static VALUE
nurat_ceil_n(int argc, VALUE *argv, VALUE self)
{
return f_round_common(argc, argv, self, nurat_ceil);
}
/*
* call-seq:
* rat.truncate([ndigits]) -> integer or rational
*
* Returns +rat+ truncated (toward zero) to
* a precision of +ndigits+ decimal digits (default: 0).
*
* When the precision is negative, the returned value is an integer
* with at least <code>ndigits.abs</code> trailing zeros.
*
* Returns a rational when +ndigits+ is positive,
* otherwise returns an integer.
*
* Rational(3).truncate #=> 3
* Rational(2, 3).truncate #=> 0
* Rational(-3, 2).truncate #=> -1
*
* # decimal - 1 2 3 . 4 5 6
* # ^ ^ ^ ^ ^ ^
* # precision -3 -2 -1 0 +1 +2
*
* Rational('-123.456').truncate(+1).to_f #=> -123.4
* Rational('-123.456').truncate(-1) #=> -120
*/
static VALUE
nurat_truncate_n(int argc, VALUE *argv, VALUE self)
{
return f_round_common(argc, argv, self, nurat_truncate);
}
/*
* call-seq:
* rat.round([ndigits] [, half: mode]) -> integer or rational
*
* Returns +rat+ rounded to the nearest value with
* a precision of +ndigits+ decimal digits (default: 0).
*
* When the precision is negative, the returned value is an integer
* with at least <code>ndigits.abs</code> trailing zeros.
*
* Returns a rational when +ndigits+ is positive,
* otherwise returns an integer.
*
* Rational(3).round #=> 3
* Rational(2, 3).round #=> 1
* Rational(-3, 2).round #=> -2
*
* # decimal - 1 2 3 . 4 5 6
* # ^ ^ ^ ^ ^ ^
* # precision -3 -2 -1 0 +1 +2
*
* Rational('-123.456').round(+1).to_f #=> -123.5
* Rational('-123.456').round(-1) #=> -120
*
* The optional +half+ keyword argument is available
* similar to Float#round.
*
* Rational(25, 100).round(1, half: :up) #=> (3/10)
* Rational(25, 100).round(1, half: :down) #=> (1/5)
* Rational(25, 100).round(1, half: :even) #=> (1/5)
* Rational(35, 100).round(1, half: :up) #=> (2/5)
* Rational(35, 100).round(1, half: :down) #=> (3/10)
* Rational(35, 100).round(1, half: :even) #=> (2/5)
* Rational(-25, 100).round(1, half: :up) #=> (-3/10)
* Rational(-25, 100).round(1, half: :down) #=> (-1/5)
* Rational(-25, 100).round(1, half: :even) #=> (-1/5)
*/
static VALUE
nurat_round_n(int argc, VALUE *argv, VALUE self)
{
VALUE opt;
enum ruby_num_rounding_mode mode = (
Make rb_scan_args handle keywords more similar to Ruby methods (#2460) Cfuncs that use rb_scan_args with the : entry suffer similar keyword argument separation issues that Ruby methods suffer if the cfuncs accept optional or variable arguments. This makes the following changes to : handling. * Treats as **kw, prompting keyword argument separation warnings if called with a positional hash. * Do not look for an option hash if empty keywords are provided. For backwards compatibility, treat an empty keyword splat as a empty mandatory positional hash argument, but emit a a warning, as this behavior will be removed in Ruby 3. The argument number check needs to be moved lower so it can correctly handle an empty positional argument being added. * If the last argument is nil and it is necessary to treat it as an option hash in order to make sure all arguments are processed, continue to treat the last argument as the option hash. Emit a warning in this case, as this behavior will be removed in Ruby 3. * If splitting the keyword hash into two hashes, issue a warning, as we will not be splitting hashes in Ruby 3. * If the keyword argument is required to fill a mandatory positional argument, continue to do so, but emit a warning as this behavior will be going away in Ruby 3. * If keyword arguments are provided and the last argument is not a hash, that indicates something wrong. This can happen if a cfunc is calling rb_scan_args multiple times, and providing arguments that were not passed to it from Ruby. Callers need to switch to the new rb_scan_args_kw function, which allows passing of whether keywords were provided. This commit fixes all warnings caused by the changes above. It switches some function calls to *_kw versions with appropriate kw_splat flags. If delegating arguments, RB_PASS_CALLED_KEYWORDS is used. If creating new arguments, RB_PASS_KEYWORDS is used if the last argument is a hash to be treated as keywords. In open_key_args in io.c, use rb_scan_args_kw. In this case, the arguments provided come from another C function, not Ruby. The last argument may or may not be a hash, so we can't set keyword argument mode. However, if it is a hash, we don't want to warn when treating it as keywords. In Ruby files, make sure to appropriately use keyword splats or literal keywords when calling Cfuncs that now issue keyword argument separation warnings through rb_scan_args. Also, make sure not to pass nil in place of an option hash. Work around Kernel#warn warnings due to problems in the Rubygems override of the method. There is an open pull request to fix these issues in Rubygems, but part of the Rubygems tests for their override fail on ruby-head due to rb_scan_args not recognizing empty keyword splats, which this commit fixes. Implementation wise, adding rb_scan_args_kw is kind of a pain, because rb_scan_args takes a variable number of arguments. In order to not duplicate all the code, the function internals need to be split into two functions taking a va_list, and to avoid passing in a ton of arguments, a single struct argument is used to handle the variables previously local to the function.
2019-09-25 21:18:49 +03:00
argc = rb_scan_args(argc, argv, "*:", NULL, &opt),
rb_num_get_rounding_option(opt));
VALUE (*round_func)(VALUE) = ROUND_FUNC(mode, nurat_round);
return f_round_common(argc, argv, self, round_func);
}
static double
nurat_to_double(VALUE self)
{
get_dat1(self);
if (!RB_INTEGER_TYPE_P(dat->num) || !RB_INTEGER_TYPE_P(dat->den)) {
return NUM2DBL(dat->num) / NUM2DBL(dat->den);
}
return rb_int_fdiv_double(dat->num, dat->den);
}
/*
* call-seq:
* rat.to_f -> float
*
* Returns the value as a Float.
*
* Rational(2).to_f #=> 2.0
* Rational(9, 4).to_f #=> 2.25
* Rational(-3, 4).to_f #=> -0.75
* Rational(20, 3).to_f #=> 6.666666666666667
*/
static VALUE
nurat_to_f(VALUE self)
{
return DBL2NUM(nurat_to_double(self));
}
/*
* call-seq:
* rat.to_r -> self
*
* Returns self.
*
* Rational(2).to_r #=> (2/1)
* Rational(-8, 6).to_r #=> (-4/3)
*/
static VALUE
nurat_to_r(VALUE self)
{
return self;
}
#define id_ceil rb_intern("ceil")
2019-08-02 05:25:41 +03:00
static VALUE
f_ceil(VALUE x)
{
if (RB_INTEGER_TYPE_P(x))
return x;
if (RB_FLOAT_TYPE_P(x))
return rb_float_ceil(x, 0);
return rb_funcall(x, id_ceil, 0);
}
2019-08-03 02:37:08 +03:00
#define id_quo idQuo
2019-08-02 05:28:24 +03:00
static VALUE
f_quo(VALUE x, VALUE y)
{
if (RB_INTEGER_TYPE_P(x))
return rb_int_div(x, y);
if (RB_FLOAT_TYPE_P(x))
return DBL2NUM(RFLOAT_VALUE(x) / RFLOAT_VALUE(y));
return rb_funcallv(x, id_quo, 1, &y);
}
#define f_reciprocal(x) f_quo(ONE, (x))
/*
The algorithm here is the method described in CLISP. Bruno Haible has
graciously given permission to use this algorithm. He says, "You can use
it, if you present the following explanation of the algorithm."
Algorithm (recursively presented):
If x is a rational number, return x.
If x = 0.0, return 0.
If x < 0.0, return (- (rationalize (- x))).
If x > 0.0:
Call (integer-decode-float x). It returns a m,e,s=1 (mantissa,
exponent, sign).
If m = 0 or e >= 0: return x = m*2^e.
Search a rational number between a = (m-1/2)*2^e and b = (m+1/2)*2^e
with smallest possible numerator and denominator.
Note 1: If m is a power of 2, we ought to take a = (m-1/4)*2^e.
But in this case the result will be x itself anyway, regardless of
the choice of a. Therefore we can simply ignore this case.
Note 2: At first, we need to consider the closed interval [a,b].
but since a and b have the denominator 2^(|e|+1) whereas x itself
has a denominator <= 2^|e|, we can restrict the search to the open
interval (a,b).
So, for given a and b (0 < a < b) we are searching a rational number
y with a <= y <= b.
Recursive algorithm fraction_between(a,b):
c := (ceiling a)
if c < b
then return c ; because a <= c < b, c integer
else
; a is not integer (otherwise we would have had c = a < b)
k := c-1 ; k = floor(a), k < a < b <= k+1
return y = k + 1/fraction_between(1/(b-k), 1/(a-k))
; note 1 <= 1/(b-k) < 1/(a-k)
You can see that we are actually computing a continued fraction expansion.
Algorithm (iterative):
If x is rational, return x.
Call (integer-decode-float x). It returns a m,e,s (mantissa,
exponent, sign).
If m = 0 or e >= 0, return m*2^e*s. (This includes the case x = 0.0.)
Create rational numbers a := (2*m-1)*2^(e-1) and b := (2*m+1)*2^(e-1)
(positive and already in lowest terms because the denominator is a
power of two and the numerator is odd).
Start a continued fraction expansion
p[-1] := 0, p[0] := 1, q[-1] := 1, q[0] := 0, i := 0.
Loop
c := (ceiling a)
if c >= b
then k := c-1, partial_quotient(k), (a,b) := (1/(b-k),1/(a-k)),
goto Loop
finally partial_quotient(c).
Here partial_quotient(c) denotes the iteration
i := i+1, p[i] := c*p[i-1]+p[i-2], q[i] := c*q[i-1]+q[i-2].
At the end, return s * (p[i]/q[i]).
This rational number is already in lowest terms because
p[i]*q[i-1]-p[i-1]*q[i] = (-1)^i.
*/
static void
nurat_rationalize_internal(VALUE a, VALUE b, VALUE *p, VALUE *q)
{
VALUE c, k, t, p0, p1, p2, q0, q1, q2;
p0 = ZERO;
p1 = ONE;
q0 = ONE;
q1 = ZERO;
while (1) {
c = f_ceil(a);
if (f_lt_p(c, b))
break;
k = f_sub(c, ONE);
p2 = f_add(f_mul(k, p1), p0);
q2 = f_add(f_mul(k, q1), q0);
t = f_reciprocal(f_sub(b, k));
b = f_reciprocal(f_sub(a, k));
a = t;
p0 = p1;
q0 = q1;
p1 = p2;
q1 = q2;
}
*p = f_add(f_mul(c, p1), p0);
*q = f_add(f_mul(c, q1), q0);
}
/*
* call-seq:
* rat.rationalize -> self
* rat.rationalize(eps) -> rational
*
* Returns a simpler approximation of the value if the optional
* argument +eps+ is given (rat-|eps| <= result <= rat+|eps|),
* self otherwise.
*
* r = Rational(5033165, 16777216)
* r.rationalize #=> (5033165/16777216)
* r.rationalize(Rational('0.01')) #=> (3/10)
* r.rationalize(Rational('0.1')) #=> (1/3)
*/
static VALUE
nurat_rationalize(int argc, VALUE *argv, VALUE self)
{
VALUE e, a, b, p, q;
if (rb_check_arity(argc, 0, 1) == 0)
return self;
if (nurat_negative_p(self))
return rb_rational_uminus(nurat_rationalize(argc, argv, rb_rational_uminus(self)));
e = f_abs(argv[0]);
a = f_sub(self, e);
b = f_add(self, e);
if (f_eqeq_p(a, b))
return self;
nurat_rationalize_internal(a, b, &p, &q);
return f_rational_new2(CLASS_OF(self), p, q);
}
/* :nodoc: */
static VALUE
nurat_hash(VALUE self)
{
st_index_t v, h[2];
VALUE n;
get_dat1(self);
n = rb_hash(dat->num);
h[0] = NUM2LONG(n);
n = rb_hash(dat->den);
h[1] = NUM2LONG(n);
v = rb_memhash(h, sizeof(h));
return ST2FIX(v);
}
static VALUE
f_format(VALUE self, VALUE (*func)(VALUE))
{
VALUE s;
get_dat1(self);
s = (*func)(dat->num);
rb_str_cat2(s, "/");
rb_str_concat(s, (*func)(dat->den));
return s;
}
/*
* call-seq:
* rat.to_s -> string
*
* Returns the value as a string.
*
* Rational(2).to_s #=> "2/1"
* Rational(-8, 6).to_s #=> "-4/3"
* Rational('1/2').to_s #=> "1/2"
*/
static VALUE
nurat_to_s(VALUE self)
{
return f_format(self, f_to_s);
}
/*
* call-seq:
* rat.inspect -> string
*
* Returns the value as a string for inspection.
*
* Rational(2).inspect #=> "(2/1)"
* Rational(-8, 6).inspect #=> "(-4/3)"
* Rational('1/2').inspect #=> "(1/2)"
*/
static VALUE
nurat_inspect(VALUE self)
{
VALUE s;
s = rb_usascii_str_new2("(");
rb_str_concat(s, f_format(self, f_inspect));
rb_str_cat2(s, ")");
return s;
}
/* :nodoc: */
static VALUE
nurat_dumper(VALUE self)
{
return self;
}
/* :nodoc: */
static VALUE
nurat_loader(VALUE self, VALUE a)
{
VALUE num, den;
get_dat1(self);
num = rb_ivar_get(a, id_i_num);
den = rb_ivar_get(a, id_i_den);
nurat_int_check(num);
nurat_int_check(den);
nurat_canonicalize(&num, &den);
RATIONAL_SET_NUM((VALUE)dat, num);
RATIONAL_SET_DEN((VALUE)dat, den);
OBJ_FREEZE_RAW(self);
return self;
}
/* :nodoc: */
static VALUE
nurat_marshal_dump(VALUE self)
{
VALUE a;
get_dat1(self);
a = rb_assoc_new(dat->num, dat->den);
rb_copy_generic_ivar(a, self);
return a;
}
/* :nodoc: */
static VALUE
nurat_marshal_load(VALUE self, VALUE a)
{
VALUE num, den;
rb_check_frozen(self);
Check_Type(a, T_ARRAY);
if (RARRAY_LEN(a) != 2)
rb_raise(rb_eArgError, "marshaled rational must have an array whose length is 2 but %ld", RARRAY_LEN(a));
num = RARRAY_AREF(a, 0);
den = RARRAY_AREF(a, 1);
nurat_int_check(num);
nurat_int_check(den);
nurat_canonicalize(&num, &den);
rb_ivar_set(self, id_i_num, num);
rb_ivar_set(self, id_i_den, den);
return self;
}
/* --- */
VALUE
rb_rational_reciprocal(VALUE x)
{
get_dat1(x);
return f_rational_new_no_reduce2(CLASS_OF(x), dat->den, dat->num);
}
/*
* call-seq:
* int.gcd(other_int) -> integer
*
* Returns the greatest common divisor of the two integers.
* The result is always positive. 0.gcd(x) and x.gcd(0) return x.abs.
*
* 36.gcd(60) #=> 12
* 2.gcd(2) #=> 2
* 3.gcd(-7) #=> 1
* ((1<<31)-1).gcd((1<<61)-1) #=> 1
*/
VALUE
rb_gcd(VALUE self, VALUE other)
{
other = nurat_int_value(other);
return f_gcd(self, other);
}
/*
* call-seq:
* int.lcm(other_int) -> integer
*
* Returns the least common multiple of the two integers.
* The result is always positive. 0.lcm(x) and x.lcm(0) return zero.
*
* 36.lcm(60) #=> 180
* 2.lcm(2) #=> 2
* 3.lcm(-7) #=> 21
* ((1<<31)-1).lcm((1<<61)-1) #=> 4951760154835678088235319297
*/
VALUE
rb_lcm(VALUE self, VALUE other)
{
other = nurat_int_value(other);
return f_lcm(self, other);
}
/*
* call-seq:
* int.gcdlcm(other_int) -> array
*
* Returns an array with the greatest common divisor and
* the least common multiple of the two integers, [gcd, lcm].
*
* 36.gcdlcm(60) #=> [12, 180]
* 2.gcdlcm(2) #=> [2, 2]
* 3.gcdlcm(-7) #=> [1, 21]
* ((1<<31)-1).gcdlcm((1<<61)-1) #=> [1, 4951760154835678088235319297]
*/
VALUE
rb_gcdlcm(VALUE self, VALUE other)
{
other = nurat_int_value(other);
return rb_assoc_new(f_gcd(self, other), f_lcm(self, other));
}
VALUE
rb_rational_raw(VALUE x, VALUE y)
{
if (! RB_INTEGER_TYPE_P(x))
x = rb_to_int(x);
if (! RB_INTEGER_TYPE_P(y))
y = rb_to_int(y);
if (INT_NEGATIVE_P(y)) {
x = rb_int_uminus(x);
y = rb_int_uminus(y);
}
return nurat_s_new_internal(rb_cRational, x, y);
}
VALUE
rb_rational_new(VALUE x, VALUE y)
{
return nurat_s_canonicalize_internal(rb_cRational, x, y);
}
VALUE
rb_Rational(VALUE x, VALUE y)
{
VALUE a[2];
a[0] = x;
a[1] = y;
return nurat_s_convert(2, a, rb_cRational);
}
VALUE
rb_rational_num(VALUE rat)
{
return nurat_numerator(rat);
}
VALUE
rb_rational_den(VALUE rat)
{
return nurat_denominator(rat);
}
#define id_numerator rb_intern("numerator")
#define f_numerator(x) rb_funcall((x), id_numerator, 0)
#define id_denominator rb_intern("denominator")
#define f_denominator(x) rb_funcall((x), id_denominator, 0)
#define id_to_r idTo_r
#define f_to_r(x) rb_funcall((x), id_to_r, 0)
/*
* call-seq:
* num.numerator -> integer
*
* Returns the numerator.
*/
static VALUE
numeric_numerator(VALUE self)
{
return f_numerator(f_to_r(self));
}
/*
* call-seq:
* num.denominator -> integer
*
* Returns the denominator (always positive).
*/
static VALUE
numeric_denominator(VALUE self)
{
return f_denominator(f_to_r(self));
}
/*
* call-seq:
* num.quo(int_or_rat) -> rat
* num.quo(flo) -> flo
*
* Returns the most exact division (rational for integers, float for floats).
*/
VALUE
rb_numeric_quo(VALUE x, VALUE y)
{
2019-08-10 17:19:24 +03:00
if (RB_TYPE_P(x, T_COMPLEX)) {
return rb_complex_div(x, y);
}
if (RB_FLOAT_TYPE_P(y)) {
2019-08-03 02:37:08 +03:00
return rb_funcallv(x, idFdiv, 1, &y);
}
if (canonicalization) {
x = rb_rational_raw1(x);
}
else {
x = rb_convert_type(x, T_RATIONAL, "Rational", "to_r");
}
return nurat_div(x, y);
}
VALUE
rb_rational_canonicalize(VALUE x)
{
if (RB_TYPE_P(x, T_RATIONAL)) {
get_dat1(x);
if (f_one_p(dat->den)) return dat->num;
}
return x;
}
/*
* call-seq:
* int.numerator -> self
*
* Returns self.
*/
static VALUE
integer_numerator(VALUE self)
{
return self;
}
/*
* call-seq:
* int.denominator -> 1
*
* Returns 1.
*/
static VALUE
integer_denominator(VALUE self)
{
return INT2FIX(1);
}
static VALUE float_to_r(VALUE self);
/*
* call-seq:
* flo.numerator -> integer
*
* Returns the numerator. The result is machine dependent.
*
* n = 0.3.numerator #=> 5404319552844595
* d = 0.3.denominator #=> 18014398509481984
* n.fdiv(d) #=> 0.3
*
* See also Float#denominator.
*/
2019-07-16 02:15:05 +03:00
VALUE
rb_float_numerator(VALUE self)
{
double d = RFLOAT_VALUE(self);
VALUE r;
if (isinf(d) || isnan(d))
return self;
r = float_to_r(self);
if (canonicalization && k_integer_p(r)) {
return r;
}
return nurat_numerator(r);
}
/*
* call-seq:
* flo.denominator -> integer
*
* Returns the denominator (always positive). The result is machine
* dependent.
*
* See also Float#numerator.
*/
2019-07-16 01:58:47 +03:00
VALUE
rb_float_denominator(VALUE self)
{
double d = RFLOAT_VALUE(self);
VALUE r;
if (isinf(d) || isnan(d))
return INT2FIX(1);
r = float_to_r(self);
if (canonicalization && k_integer_p(r)) {
return ONE;
}
return nurat_denominator(r);
}
/*
* call-seq:
* nil.to_r -> (0/1)
*
* Returns zero as a rational.
*/
static VALUE
nilclass_to_r(VALUE self)
{
return rb_rational_new1(INT2FIX(0));
}
/*
* call-seq:
* nil.rationalize([eps]) -> (0/1)
*
* Returns zero as a rational. The optional argument +eps+ is always
* ignored.
*/
static VALUE
nilclass_rationalize(int argc, VALUE *argv, VALUE self)
{
rb_check_arity(argc, 0, 1);
return nilclass_to_r(self);
}
/*
* call-seq:
* int.to_r -> rational
*
* Returns the value as a rational.
*
* 1.to_r #=> (1/1)
* (1<<64).to_r #=> (18446744073709551616/1)
*/
static VALUE
integer_to_r(VALUE self)
{
return rb_rational_new1(self);
}
/*
* call-seq:
* int.rationalize([eps]) -> rational
*
* Returns the value as a rational. The optional argument +eps+ is
* always ignored.
*/
static VALUE
integer_rationalize(int argc, VALUE *argv, VALUE self)
{
rb_check_arity(argc, 0, 1);
return integer_to_r(self);
}
static void
float_decode_internal(VALUE self, VALUE *rf, int *n)
{
double f;
f = frexp(RFLOAT_VALUE(self), n);
f = ldexp(f, DBL_MANT_DIG);
*n -= DBL_MANT_DIG;
*rf = rb_dbl2big(f);
}
/*
* call-seq:
* flt.to_r -> rational
*
* Returns the value as a rational.
*
* 2.0.to_r #=> (2/1)
* 2.5.to_r #=> (5/2)
* -0.75.to_r #=> (-3/4)
* 0.0.to_r #=> (0/1)
* 0.3.to_r #=> (5404319552844595/18014398509481984)
*
* NOTE: 0.3.to_r isn't the same as "0.3".to_r. The latter is
* equivalent to "3/10".to_r, but the former isn't so.
*
* 0.3.to_r == 3/10r #=> false
* "0.3".to_r == 3/10r #=> true
*
* See also Float#rationalize.
*/
static VALUE
float_to_r(VALUE self)
{
VALUE f;
int n;
float_decode_internal(self, &f, &n);
#if FLT_RADIX == 2
if (n == 0)
return rb_rational_new1(f);
if (n > 0)
return rb_rational_new1(rb_int_lshift(f, INT2FIX(n)));
n = -n;
return rb_rational_new2(f, rb_int_lshift(ONE, INT2FIX(n)));
#else
f = rb_int_mul(f, rb_int_pow(INT2FIX(FLT_RADIX), n));
if (RB_TYPE_P(f, T_RATIONAL))
return f;
return rb_rational_new1(f);
#endif
}
VALUE
rb_flt_rationalize_with_prec(VALUE flt, VALUE prec)
{
VALUE e, a, b, p, q;
e = f_abs(prec);
a = f_sub(flt, e);
b = f_add(flt, e);
if (f_eqeq_p(a, b))
return float_to_r(flt);
nurat_rationalize_internal(a, b, &p, &q);
return rb_rational_new2(p, q);
}
VALUE
rb_flt_rationalize(VALUE flt)
{
VALUE a, b, f, p, q;
int n;
float_decode_internal(flt, &f, &n);
if (INT_ZERO_P(f) || n >= 0)
return rb_rational_new1(rb_int_lshift(f, INT2FIX(n)));
{
VALUE radix_times_f, den;
radix_times_f = rb_int_mul(INT2FIX(FLT_RADIX), f);
2019-08-02 12:11:05 +03:00
#if FLT_RADIX == 2 && 0
den = rb_int_lshift(ONE, INT2FIX(1-n));
2019-08-02 12:11:05 +03:00
#else
den = rb_int_positive_pow(FLT_RADIX, 1-n);
2019-08-02 12:11:05 +03:00
#endif
a = rb_rational_new2(rb_int_minus(radix_times_f, INT2FIX(FLT_RADIX - 1)), den);
b = rb_rational_new2(rb_int_plus(radix_times_f, INT2FIX(FLT_RADIX - 1)), den);
}
if (nurat_eqeq_p(a, b))
return float_to_r(flt);
nurat_rationalize_internal(a, b, &p, &q);
return rb_rational_new2(p, q);
}
/*
* call-seq:
* flt.rationalize([eps]) -> rational
*
* Returns a simpler approximation of the value (flt-|eps| <= result
* <= flt+|eps|). If the optional argument +eps+ is not given,
* it will be chosen automatically.
*
* 0.3.rationalize #=> (3/10)
* 1.333.rationalize #=> (1333/1000)
* 1.333.rationalize(0.01) #=> (4/3)
*
* See also Float#to_r.
*/
static VALUE
float_rationalize(int argc, VALUE *argv, VALUE self)
{
double d = RFLOAT_VALUE(self);
if (d < 0.0)
return rb_rational_uminus(float_rationalize(argc, argv, DBL2NUM(-d)));
if (rb_check_arity(argc, 0, 1)) {
return rb_flt_rationalize_with_prec(self, argv[0]);
}
else {
return rb_flt_rationalize(self);
}
}
inline static int
issign(int c)
{
return (c == '-' || c == '+');
}
static int
read_sign(const char **s, const char *const e)
{
int sign = '?';
if (*s < e && issign(**s)) {
sign = **s;
(*s)++;
}
return sign;
}
inline static int
islettere(int c)
{
return (c == 'e' || c == 'E');
}
static VALUE
negate_num(VALUE num)
{
if (FIXNUM_P(num)) {
return rb_int_uminus(num);
}
else {
BIGNUM_NEGATE(num);
return rb_big_norm(num);
}
}
static int
read_num(const char **s, const char *const end, VALUE *num, VALUE *nexp)
{
VALUE fp = ONE, exp, fn = ZERO, n = ZERO;
int expsign = 0, ok = 0;
char *e;
*nexp = ZERO;
*num = ZERO;
if (*s < end && **s != '.') {
n = rb_int_parse_cstr(*s, end-*s, &e, NULL,
10, RB_INT_PARSE_UNDERSCORE);
if (NIL_P(n))
return 0;
*s = e;
*num = n;
ok = 1;
}
if (*s < end && **s == '.') {
size_t count = 0;
(*s)++;
fp = rb_int_parse_cstr(*s, end-*s, &e, &count,
10, RB_INT_PARSE_UNDERSCORE);
if (NIL_P(fp))
return 1;
*s = e;
{
VALUE l = f_expt10(*nexp = SIZET2NUM(count));
n = n == ZERO ? fp : rb_int_plus(rb_int_mul(*num, l), fp);
*num = n;
fn = SIZET2NUM(count);
}
ok = 1;
}
if (ok && *s + 1 < end && islettere(**s)) {
(*s)++;
expsign = read_sign(s, end);
exp = rb_int_parse_cstr(*s, end-*s, &e, NULL,
10, RB_INT_PARSE_UNDERSCORE);
if (NIL_P(exp))
return 1;
*s = e;
if (exp != ZERO) {
if (expsign == '-') {
if (fn != ZERO) exp = rb_int_plus(exp, fn);
}
else {
if (fn != ZERO) exp = rb_int_minus(exp, fn);
exp = negate_num(exp);
}
*nexp = exp;
}
}
return ok;
}
inline static const char *
skip_ws(const char *s, const char *e)
{
while (s < e && isspace((unsigned char)*s))
++s;
return s;
}
static VALUE
parse_rat(const char *s, const char *const e, int strict, int raise)
{
int sign;
VALUE num, den, nexp, dexp;
s = skip_ws(s, e);
sign = read_sign(&s, e);
if (!read_num(&s, e, &num, &nexp)) {
if (strict) return Qnil;
return canonicalization ? ZERO : nurat_s_alloc(rb_cRational);
}
den = ONE;
if (s < e && *s == '/') {
s++;
if (!read_num(&s, e, &den, &dexp)) {
if (strict) return Qnil;
den = ONE;
}
else if (den == ZERO) {
if (!raise) return Qnil;
rb_num_zerodiv();
}
else if (strict && skip_ws(s, e) != e) {
return Qnil;
}
else {
nexp = rb_int_minus(nexp, dexp);
nurat_reduce(&num, &den);
}
}
else if (strict && skip_ws(s, e) != e) {
return Qnil;
}
if (nexp != ZERO) {
if (INT_NEGATIVE_P(nexp)) {
VALUE mul;
if (!FIXNUM_P(nexp)) {
overflow:
return sign == '-' ? DBL2NUM(-HUGE_VAL) : DBL2NUM(HUGE_VAL);
}
mul = f_expt10(LONG2NUM(-FIX2LONG(nexp)));
if (RB_FLOAT_TYPE_P(mul)) goto overflow;
num = rb_int_mul(num, mul);
}
else {
VALUE div;
if (!FIXNUM_P(nexp)) {
underflow:
return sign == '-' ? DBL2NUM(-0.0) : DBL2NUM(+0.0);
}
div = f_expt10(nexp);
if (RB_FLOAT_TYPE_P(div)) goto underflow;
den = rb_int_mul(den, div);
}
nurat_reduce(&num, &den);
}
if (sign == '-') {
num = negate_num(num);
}
if (!canonicalization || den != ONE)
num = rb_rational_raw(num, den);
return num;
}
static VALUE
string_to_r_strict(VALUE self, int raise)
{
VALUE num;
rb_must_asciicompat(self);
num = parse_rat(RSTRING_PTR(self), RSTRING_END(self), 1, raise);
if (NIL_P(num)) {
if (!raise) return Qnil;
rb_raise(rb_eArgError, "invalid value for convert(): %+"PRIsVALUE,
self);
}
if (RB_FLOAT_TYPE_P(num) && !FLOAT_ZERO_P(num)) {
if (!raise) return Qnil;
rb_raise(rb_eFloatDomainError, "Infinity");
}
return num;
}
/*
* call-seq:
* str.to_r -> rational
*
* Returns the result of interpreting leading characters in +str+
* as a rational. Leading whitespace and extraneous characters
* past the end of a valid number are ignored.
* Digit sequences can be separated by an underscore.
* If there is not a valid number at the start of +str+,
* zero is returned. This method never raises an exception.
*
* ' 2 '.to_r #=> (2/1)
* '300/2'.to_r #=> (150/1)
* '-9.2'.to_r #=> (-46/5)
* '-9.2e2'.to_r #=> (-920/1)
* '1_234_567'.to_r #=> (1234567/1)
* '21 June 09'.to_r #=> (21/1)
* '21/06/09'.to_r #=> (7/2)
* 'BWV 1079'.to_r #=> (0/1)
*
* NOTE: "0.3".to_r isn't the same as 0.3.to_r. The former is
* equivalent to "3/10".to_r, but the latter isn't so.
*
* "0.3".to_r == 3/10r #=> true
* 0.3.to_r == 3/10r #=> false
*
* See also Kernel#Rational.
*/
static VALUE
string_to_r(VALUE self)
{
VALUE num;
rb_must_asciicompat(self);
num = parse_rat(RSTRING_PTR(self), RSTRING_END(self), 0, TRUE);
if (RB_FLOAT_TYPE_P(num) && !FLOAT_ZERO_P(num))
rb_raise(rb_eFloatDomainError, "Infinity");
return num;
}
VALUE
rb_cstr_to_rat(const char *s, int strict) /* for complex's internal */
{
VALUE num;
num = parse_rat(s, s + strlen(s), strict, TRUE);
if (RB_FLOAT_TYPE_P(num) && !FLOAT_ZERO_P(num))
rb_raise(rb_eFloatDomainError, "Infinity");
return num;
}
static VALUE
to_rational(VALUE val)
{
return rb_convert_type_with_id(val, T_RATIONAL, "Rational", idTo_r);
}
static VALUE
nurat_convert(VALUE klass, VALUE numv, VALUE denv, int raise)
{
VALUE a1 = numv, a2 = denv;
int state;
if (NIL_P(a1) || NIL_P(a2)) {
if (!raise) return Qnil;
rb_raise(rb_eTypeError, "can't convert nil into Rational");
}
if (RB_TYPE_P(a1, T_COMPLEX)) {
if (k_exact_zero_p(RCOMPLEX(a1)->imag))
a1 = RCOMPLEX(a1)->real;
}
if (RB_TYPE_P(a2, T_COMPLEX)) {
if (k_exact_zero_p(RCOMPLEX(a2)->imag))
a2 = RCOMPLEX(a2)->real;
}
if (RB_FLOAT_TYPE_P(a1)) {
a1 = float_to_r(a1);
}
else if (RB_TYPE_P(a1, T_STRING)) {
a1 = string_to_r_strict(a1, raise);
if (!raise && NIL_P(a1)) return Qnil;
}
if (RB_FLOAT_TYPE_P(a2)) {
a2 = float_to_r(a2);
}
else if (RB_TYPE_P(a2, T_STRING)) {
a2 = string_to_r_strict(a2, raise);
if (!raise && NIL_P(a2)) return Qnil;
}
if (RB_TYPE_P(a1, T_RATIONAL)) {
if (a2 == Qundef || (k_exact_one_p(a2)))
return a1;
}
if (a2 == Qundef) {
if (!k_integer_p(a1)) {
if (!raise) {
VALUE result = rb_protect(to_rational, a1, NULL);
rb_set_errinfo(Qnil);
return result;
}
return to_rational(a1);
}
}
else {
if (!k_numeric_p(a1)) {
if (!raise) {
a1 = rb_protect(to_rational, a1, &state);
if (state) {
rb_set_errinfo(Qnil);
return Qnil;
}
}
else {
a1 = rb_check_convert_type_with_id(a1, T_RATIONAL, "Rational", idTo_r);
}
}
if (!k_numeric_p(a2)) {
if (!raise) {
a2 = rb_protect(to_rational, a2, &state);
if (state) {
rb_set_errinfo(Qnil);
return Qnil;
}
}
else {
a2 = rb_check_convert_type_with_id(a2, T_RATIONAL, "Rational", idTo_r);
}
}
if ((k_numeric_p(a1) && k_numeric_p(a2)) &&
(!f_integer_p(a1) || !f_integer_p(a2)))
return f_div(a1, a2);
}
2020-01-17 03:45:10 +03:00
a1 = nurat_int_value(a1);
if (a2 == Qundef) {
a2 = ONE;
}
else if (!k_integer_p(a2) && !raise) {
return Qnil;
}
2020-01-17 03:45:10 +03:00
else {
a2 = nurat_int_value(a2);
}
return nurat_s_canonicalize_internal(klass, a1, a2);
}
static VALUE
nurat_s_convert(int argc, VALUE *argv, VALUE klass)
{
VALUE a1, a2;
if (rb_scan_args(argc, argv, "11", &a1, &a2) == 1) {
a2 = Qundef;
}
return nurat_convert(klass, a1, a2, TRUE);
}
/*
* A rational number can be represented as a pair of integer numbers:
* a/b (b>0), where a is the numerator and b is the denominator.
* Integer a equals rational a/1 mathematically.
*
* In Ruby, you can create rational objects with the Kernel#Rational,
* to_r, or rationalize methods or by suffixing +r+ to a literal.
* The return values will be irreducible fractions.
*
* Rational(1) #=> (1/1)
* Rational(2, 3) #=> (2/3)
* Rational(4, -6) #=> (-2/3)
* 3.to_r #=> (3/1)
* 2/3r #=> (2/3)
*
* You can also create rational objects from floating-point numbers or
* strings.
*
* Rational(0.3) #=> (5404319552844595/18014398509481984)
* Rational('0.3') #=> (3/10)
* Rational('2/3') #=> (2/3)
*
* 0.3.to_r #=> (5404319552844595/18014398509481984)
* '0.3'.to_r #=> (3/10)
* '2/3'.to_r #=> (2/3)
* 0.3.rationalize #=> (3/10)
*
* A rational object is an exact number, which helps you to write
* programs without any rounding errors.
*
* 10.times.inject(0) {|t| t + 0.1 } #=> 0.9999999999999999
* 10.times.inject(0) {|t| t + Rational('0.1') } #=> (1/1)
*
* However, when an expression includes an inexact component (numerical value
* or operation), it will produce an inexact result.
*
* Rational(10) / 3 #=> (10/3)
* Rational(10) / 3.0 #=> 3.3333333333333335
*
* Rational(-8) ** Rational(1, 3)
* #=> (1.0000000000000002+1.7320508075688772i)
*/
void
Init_Rational(void)
{
VALUE compat;
#undef rb_intern
#define rb_intern(str) rb_intern_const(str)
id_abs = rb_intern("abs");
id_integer_p = rb_intern("integer?");
id_i_num = rb_intern("@numerator");
id_i_den = rb_intern("@denominator");
rb_cRational = rb_define_class("Rational", rb_cNumeric);
rb_define_alloc_func(rb_cRational, nurat_s_alloc);
rb_undef_method(CLASS_OF(rb_cRational), "allocate");
rb_undef_method(CLASS_OF(rb_cRational), "new");
rb_define_global_function("Rational", nurat_f_rational, -1);
rb_define_method(rb_cRational, "numerator", nurat_numerator, 0);
rb_define_method(rb_cRational, "denominator", nurat_denominator, 0);
rb_define_method(rb_cRational, "-@", rb_rational_uminus, 0);
rb_define_method(rb_cRational, "+", rb_rational_plus, 1);
rb_define_method(rb_cRational, "-", nurat_sub, 1);
complex.c: Optimize Complex#* and Complex#** Optimize f_mul for the core numeric class components. This change improves the computation time of Complex#* and Complex#**. ``` $ make benchmark ITEM=complex_float_ COMPARE_RUBY=/Users/mrkn/.rbenv/versions/2.6.0/bin/ruby generating known_errors.inc known_errors.inc unchanged /Users/mrkn/src/github.com/ruby/ruby/revision.h unchanged /Users/mrkn/.rbenv/shims/ruby --disable=gems -rrubygems -I/Users/mrkn/src/github.com/ruby/ruby/benchmark/lib /Users/mrkn/src/github.com/ruby/ruby/benchmark/benchmark-driver/exe/benchmark-driver \ --executables="compare-ruby::/Users/mrkn/.rbenv/versions/2.6.0/bin/ruby -I.ext/common --disable-gem" \ --executables="built-ruby::./miniruby -I/Users/mrkn/src/github.com/ruby/ruby/lib -I. -I.ext/common -r/Users/mrkn/src/github.com/ruby/ruby/prelude --disable-gem" \ $(find /Users/mrkn/src/github.com/ruby/ruby/benchmark -maxdepth 1 -name '*complex_float_*.yml' -o -name '*complex_float_*.rb' | sort) Calculating ------------------------------------- compare-ruby built-ruby complex_float_add 6.558M 13.012M i/s - 1.000M times in 0.152480s 0.076850s complex_float_div 576.821k 567.969k i/s - 1.000M times in 1.733640s 1.760660s complex_float_mul 1.690M 2.628M i/s - 1.000M times in 0.591786s 0.380579s complex_float_new 1.350M 1.268M i/s - 1.000M times in 0.740669s 0.788762s complex_float_power 1.571M 1.835M i/s - 1.000M times in 0.636507s 0.544909s complex_float_sub 8.635M 8.779M i/s - 1.000M times in 0.115814s 0.113906s Comparison: complex_float_add built-ruby: 13012361.7 i/s compare-ruby: 6558237.1 i/s - 1.98x slower complex_float_div compare-ruby: 576821.0 i/s built-ruby: 567968.8 i/s - 1.02x slower complex_float_mul built-ruby: 2627575.4 i/s compare-ruby: 1689800.0 i/s - 1.55x slower complex_float_new compare-ruby: 1350130.8 i/s built-ruby: 1267809.6 i/s - 1.06x slower complex_float_power built-ruby: 1835168.8 i/s compare-ruby: 1571074.6 i/s - 1.17x slower complex_float_sub built-ruby: 8779168.8 i/s compare-ruby: 8634534.7 i/s - 1.02x slower ``` git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66697 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2019-01-03 09:19:17 +03:00
rb_define_method(rb_cRational, "*", rb_rational_mul, 1);
rb_define_method(rb_cRational, "/", nurat_div, 1);
rb_define_method(rb_cRational, "quo", nurat_div, 1);
rb_define_method(rb_cRational, "fdiv", nurat_fdiv, 1);
rb_define_method(rb_cRational, "**", nurat_expt, 1);
rb_define_method(rb_cRational, "<=>", rb_rational_cmp, 1);
rb_define_method(rb_cRational, "==", nurat_eqeq_p, 1);
rb_define_method(rb_cRational, "coerce", nurat_coerce, 1);
rb_define_method(rb_cRational, "positive?", nurat_positive_p, 0);
rb_define_method(rb_cRational, "negative?", nurat_negative_p, 0);
rb_define_method(rb_cRational, "abs", rb_rational_abs, 0);
rb_define_method(rb_cRational, "magnitude", rb_rational_abs, 0);
rb_define_method(rb_cRational, "floor", nurat_floor_n, -1);
rb_define_method(rb_cRational, "ceil", nurat_ceil_n, -1);
rb_define_method(rb_cRational, "truncate", nurat_truncate_n, -1);
rb_define_method(rb_cRational, "round", nurat_round_n, -1);
rb_define_method(rb_cRational, "to_i", nurat_truncate, 0);
rb_define_method(rb_cRational, "to_f", nurat_to_f, 0);
rb_define_method(rb_cRational, "to_r", nurat_to_r, 0);
rb_define_method(rb_cRational, "rationalize", nurat_rationalize, -1);
rb_define_method(rb_cRational, "hash", nurat_hash, 0);
rb_define_method(rb_cRational, "to_s", nurat_to_s, 0);
rb_define_method(rb_cRational, "inspect", nurat_inspect, 0);
rb_define_private_method(rb_cRational, "marshal_dump", nurat_marshal_dump, 0);
/* :nodoc: */
compat = rb_define_class_under(rb_cRational, "compatible", rb_cObject);
rb_define_private_method(compat, "marshal_load", nurat_marshal_load, 1);
rb_marshal_define_compat(rb_cRational, compat, nurat_dumper, nurat_loader);
/* --- */
rb_define_method(rb_cInteger, "gcd", rb_gcd, 1);
rb_define_method(rb_cInteger, "lcm", rb_lcm, 1);
rb_define_method(rb_cInteger, "gcdlcm", rb_gcdlcm, 1);
rb_define_method(rb_cNumeric, "numerator", numeric_numerator, 0);
rb_define_method(rb_cNumeric, "denominator", numeric_denominator, 0);
rb_define_method(rb_cNumeric, "quo", rb_numeric_quo, 1);
rb_define_method(rb_cInteger, "numerator", integer_numerator, 0);
rb_define_method(rb_cInteger, "denominator", integer_denominator, 0);
2019-07-16 02:15:05 +03:00
rb_define_method(rb_cFloat, "numerator", rb_float_numerator, 0);
2019-07-16 01:58:47 +03:00
rb_define_method(rb_cFloat, "denominator", rb_float_denominator, 0);
rb_define_method(rb_cNilClass, "to_r", nilclass_to_r, 0);
rb_define_method(rb_cNilClass, "rationalize", nilclass_rationalize, -1);
rb_define_method(rb_cInteger, "to_r", integer_to_r, 0);
rb_define_method(rb_cInteger, "rationalize", integer_rationalize, -1);
rb_define_method(rb_cFloat, "to_r", float_to_r, 0);
rb_define_method(rb_cFloat, "rationalize", float_rationalize, -1);
rb_define_method(rb_cString, "to_r", string_to_r, 0);
rb_define_private_method(CLASS_OF(rb_cRational), "convert", nurat_s_convert, -1);
rb_provide("rational.so"); /* for backward compatibility */
}