ruby/trace_point.rb

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

418 строки
11 KiB
Ruby
Исходник Обычный вид История

# loaded from vm_trace.c
# A class that provides the functionality of Kernel#set_trace_func in a
# nice Object-Oriented API.
#
# == Example
#
# We can use TracePoint to gather information specifically for exceptions:
#
# trace = TracePoint.new(:raise) do |tp|
# p [tp.lineno, tp.event, tp.raised_exception]
# end
# #=> #<TracePoint:disabled>
#
# trace.enable
# #=> false
#
# 0 / 0
# #=> [5, :raise, #<ZeroDivisionError: divided by 0>]
#
# == Events
#
# If you don't specify the type of events you want to listen for,
# TracePoint will include all available events.
#
# *Note* do not depend on current event set, as this list is subject to
# change. Instead, it is recommended you specify the type of events you
# want to use.
#
# To filter what is traced, you can pass any of the following as +events+:
#
# +:line+:: execute an expression or statement on a new line
# +:class+:: start a class or module definition
# +:end+:: finish a class or module definition
# +:call+:: call a Ruby method
# +:return+:: return from a Ruby method
# +:c_call+:: call a C-language routine
# +:c_return+:: return from a C-language routine
# +:raise+:: raise an exception
# +:b_call+:: event hook at block entry
# +:b_return+:: event hook at block ending
# +:a_call+:: event hook at all calls (+call+, +b_call+, and +c_call+)
# +:a_return+:: event hook at all returns (+return+, +b_return+, and +c_return+)
# +:thread_begin+:: event hook at thread beginning
# +:thread_end+:: event hook at thread ending
# +:fiber_switch+:: event hook at fiber switch
# +:script_compiled+:: new Ruby code compiled (with +eval+, +load+ or +require+)
#
class TracePoint
# call-seq:
# TracePoint.new(*events) { |obj| block } -> obj
#
# Returns a new TracePoint object, not enabled by default.
#
# Next, in order to activate the trace, you must use TracePoint#enable
#
# trace = TracePoint.new(:call) do |tp|
# p [tp.lineno, tp.defined_class, tp.method_id, tp.event]
# end
# #=> #<TracePoint:disabled>
#
# trace.enable
# #=> false
#
# puts "Hello, TracePoint!"
# # ...
# # [48, IRB::Notifier::AbstractNotifier, :printf, :call]
# # ...
#
# When you want to deactivate the trace, you must use TracePoint#disable
#
# trace.disable
#
# See TracePoint@Events for possible events and more information.
#
# A block must be given, otherwise an ArgumentError is raised.
#
# If the trace method isn't included in the given events filter, a
# RuntimeError is raised.
#
# TracePoint.trace(:line) do |tp|
# p tp.raised_exception
# end
# #=> RuntimeError: 'raised_exception' not supported by this event
#
# If the trace method is called outside block, a RuntimeError is raised.
#
# TracePoint.trace(:line) do |tp|
# $tp = tp
# end
# $tp.lineno #=> access from outside (RuntimeError)
#
# Access from other threads is also forbidden.
#
def self.new(*events)
Primitive.tracepoint_new_s(events)
end
# call-seq:
# trace.inspect -> string
#
# Return a string containing a human-readable TracePoint
# status.
def inspect
Primitive.tracepoint_inspect
end
# call-seq:
# TracePoint.stat -> obj
#
# Returns internal information of TracePoint.
#
# The contents of the returned value are implementation specific.
# It may be changed in future.
#
# This method is only for debugging TracePoint itself.
def self.stat
Primitive.tracepoint_stat_s
end
# call-seq:
# TracePoint.trace(*events) { |obj| block } -> obj
#
# A convenience method for TracePoint.new, that activates the trace
# automatically.
#
# trace = TracePoint.trace(:call) { |tp| [tp.lineno, tp.event] }
# #=> #<TracePoint:enabled>
#
# trace.enabled? #=> true
#
def self.trace(*events)
Primitive.tracepoint_trace_s(events)
end
# call-seq:
# TracePoint.allow_reentry { block }
#
# In general, while a TracePoint callback is running,
# other registered callbacks are not called to avoid
# confusion by reentrance.
# This method allows the reentrance in a given block.
# This method should be used carefully, otherwise the callback
# can be easily called infinitely.
#
# If this method is called when the reentrance is already allowed,
# it raises a RuntimeError.
#
# <b>Example:</b>
#
# # Without reentry
# # ---------------
#
# line_handler = TracePoint.new(:line) do |tp|
# next if tp.path != __FILE__ # only work in this file
# puts "Line handler"
# binding.eval("class C; end")
# end.enable
#
# class_handler = TracePoint.new(:class) do |tp|
# puts "Class handler"
# end.enable
#
# class B
# end
#
# # This script will print "Class handler" only once: when inside :line
# # handler, all other handlers are ignored
#
#
# # With reentry
# # ------------
#
# line_handler = TracePoint.new(:line) do |tp|
# next if tp.path != __FILE__ # only work in this file
# next if (__LINE__..__LINE__+3).cover?(tp.lineno) # don't be invoked from itself
# puts "Line handler"
# TracePoint.allow_reentry { binding.eval("class C; end") }
# end.enable
#
# class_handler = TracePoint.new(:class) do |tp|
# puts "Class handler"
# end.enable
#
# class B
# end
#
# # This wil print "Class handler" twice: inside allow_reentry block in :line
# # handler, other handlers are enabled.
#
# Note that the example shows the principal effect of the method, but its
# practical usage is for debugging libraries that sometimes require other libraries
# hooks to not be affected by debugger being inside trace point handling. Precautions
# should be taken against infinite recursion in this case (note that we needed to filter
# out calls by itself from :line handler, otherwise it will call itself infinitely).
#
def self.allow_reentry
Primitive.tracepoint_allow_reentry
end
# call-seq:
# trace.enable(target: nil, target_line: nil, target_thread: nil) -> true or false
# trace.enable(target: nil, target_line: nil, target_thread: :default) { block } -> obj
#
# Activates the trace.
#
# Returns +true+ if trace was enabled.
# Returns +false+ if trace was disabled.
#
# trace.enabled? #=> false
# trace.enable #=> false (previous state)
# # trace is enabled
# trace.enabled? #=> true
# trace.enable #=> true (previous state)
# # trace is still enabled
#
# If a block is given, the trace will only be enabled during the block call.
2022-02-08 19:55:49 +03:00
# If target and target_line are both nil, then target_thread will default
# to the current thread if a block is given.
#
# trace.enabled?
# #=> false
#
# trace.enable do
# trace.enabled?
# # only enabled for this block and thread
# end
#
# trace.enabled?
# #=> false
#
# +target+, +target_line+ and +target_thread+ parameters are used to
# limit tracing only to specified code objects. +target+ should be a
# code object for which RubyVM::InstructionSequence.of will return
# an instruction sequence.
#
# t = TracePoint.new(:line) { |tp| p tp }
#
# def m1
# p 1
# end
#
# def m2
# p 2
# end
#
# t.enable(target: method(:m1))
#
# m1
# # prints #<TracePoint:line test.rb:4 in `m1'>
# m2
# # prints nothing
#
# Note: You cannot access event hooks within the +enable+ block.
#
# trace.enable { p tp.lineno }
# #=> RuntimeError: access from outside
#
def enable(target: nil, target_line: nil, target_thread: :default)
Primitive.tracepoint_enable_m(target, target_line, target_thread)
end
# call-seq:
# trace.disable -> true or false
# trace.disable { block } -> obj
#
# Deactivates the trace
#
# Return true if trace was enabled.
# Return false if trace was disabled.
#
# trace.enabled? #=> true
# trace.disable #=> true (previous status)
# trace.enabled? #=> false
# trace.disable #=> false
#
# If a block is given, the trace will only be disable within the scope of the
# block.
#
# trace.enabled?
# #=> true
#
# trace.disable do
# trace.enabled?
# # only disabled for this block
# end
#
# trace.enabled?
# #=> true
#
# Note: You cannot access event hooks within the block.
#
# trace.disable { p tp.lineno }
# #=> RuntimeError: access from outside
def disable
Primitive.tracepoint_disable_m
end
# call-seq:
# trace.enabled? -> true or false
#
# The current status of the trace
def enabled?
Primitive.tracepoint_enabled_p
end
# Type of event
#
# See TracePoint@Events for more information.
def event
Primitive.tracepoint_attr_event
end
# Line number of the event
def lineno
Primitive.tracepoint_attr_lineno
end
# Path of the file being run
def path
Primitive.tracepoint_attr_path
end
# Return the parameters definition of the method or block that the
# current hook belongs to. Format is the same as for Method#parameters
def parameters
Primitive.tracepoint_attr_parameters
end
# Return the name at the definition of the method being called
def method_id
Primitive.tracepoint_attr_method_id
end
# Return the called name of the method being called
def callee_id
Primitive.tracepoint_attr_callee_id
end
# Return class or module of the method being called.
#
# class C; def foo; end; end
# trace = TracePoint.new(:call) do |tp|
# p tp.defined_class #=> C
# end.enable do
# C.new.foo
# end
#
# If method is defined by a module, then that module is returned.
#
# module M; def foo; end; end
# class C; include M; end;
# trace = TracePoint.new(:call) do |tp|
# p tp.defined_class #=> M
# end.enable do
# C.new.foo
# end
#
# <b>Note:</b> #defined_class returns singleton class.
#
# 6th block parameter of Kernel#set_trace_func passes original class
# of attached by singleton class.
#
# <b>This is a difference between Kernel#set_trace_func and TracePoint.</b>
#
# class C; def self.foo; end; end
# trace = TracePoint.new(:call) do |tp|
# p tp.defined_class #=> #<Class:C>
# end.enable do
# C.foo
# end
def defined_class
Primitive.tracepoint_attr_defined_class
end
# Return the generated binding object from event.
#
# Note that for +c_call+ and +c_return+ events, the method will return
# +nil+, since C methods themselves do not have bindings.
def binding
Primitive.tracepoint_attr_binding
end
# Return the trace object during event
#
# Same as the following, except it returns the correct object (the method
# receiver) for +c_call+ and +c_return+ events:
#
# trace.binding.eval('self')
def self
Primitive.tracepoint_attr_self
end
# Return value from +:return+, +c_return+, and +b_return+ event
def return_value
Primitive.tracepoint_attr_return_value
end
# Value from exception raised on the +:raise+ event
def raised_exception
Primitive.tracepoint_attr_raised_exception
end
# Compiled source code (String) on *eval methods on the +:script_compiled+ event.
# If loaded from a file, it will return nil.
def eval_script
Primitive.tracepoint_attr_eval_script
end
# Compiled instruction sequence represented by a RubyVM::InstructionSequence instance
# on the +:script_compiled+ event.
#
# Note that this method is MRI specific.
def instruction_sequence
Primitive.tracepoint_attr_instruction_sequence
end
end