Especially over checking argc then calling rb_scan_args just to
raise an ArgumentError.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66238 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
postponed_job is safe to use in signal handlers, but is not
thread-safe for MJIT. Implement a workqueue for MJIT
thread-safety.
[Bug #15316]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66100 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c (rb_tracepoint_enable_for_target): support targetting
TracePoint. [Feature #15289]
Tragetting TracePoint is only enabled on specified method, proc
and so on, example: `tp.enable(target: code)`.
`code` should be consisted of InstructionSeuqnece (iseq)
(RubyVM::InstructionSeuqnece.of(code) should not return nil)
If code is a tree of iseq, TracePoint is enabled on all of
iseqs in a tree.
Enabled tragetting TracePoints can not enabled again with
and without target.
* vm_core.h (rb_iseq_t): introduce `rb_iseq_t::local_hooks`
to store local hooks.
`rb_iseq_t::aux::trace_events` is renamed to
`global_trace_events` to contrast with `local_hooks`.
* vm_core.h (rb_hook_list_t): add `rb_hook_list_t::running`
to represent how many Threads/Fibers are used this list.
If this field is 0, nobody using this hooks and we can
delete it.
This is why we can remove code from cont.c.
* vm_core.h (rb_vm_t): because of above change, we can eliminate
`rb_vm_t::trace_running` field.
Also renamed from `rb_vm_t::event_hooks` to `global_hooks`.
* vm_core.h, vm.c (ruby_vm_event_enabled_global_flags): renamed
from `ruby_vm_event_enabled_flags.
* vm_core.h, vm.c (ruby_vm_event_local_num): added to count
enabled targetting TracePoints.
* vm_core.h, vm_trace.c (rb_exec_event_hooks): accepts
hook list.
* vm_core.h (rb_vm_global_hooks): added for convinience.
* method.h (rb_method_bmethod_t): added to maintain Proc
and `rb_hook_list_t` for bmethod (defined by define_method).
* prelude.rb (TracePoint#enable): extracet a keyword parameter
(because it is easy than writing in C).
It calls `TracePoint#__enable` internal method written in C.
* vm_insnhelper.c (vm_trace): check also iseq->local_hooks.
* vm.c (invoke_bmethod): check def->body.bmethod.hooks.
* vm.c (hook_before_rewind): check iseq->local_hooks
and def->body.bmethod.hooks before rewind by exception.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66003 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
RUBY_VM_CHECK_INTS_BLOCKING may switch threads and cause `fd'
to be closed. So we must ensure we register the waiting_fd
before checking for interrupts.
This only affects the ppoll/poll-using implementation of
rb_wait_for_single_fd, as the select-based implementation
already register waiting_fd before checking for interrupts.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65940 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
All normal Ruby IO methods (IO#read, IO#gets, IO#write, ...) are
all capable of appearing to be "blocking" when presented with a
file description with the O_NONBLOCK flag set; so there is
little risk of incompatibility within Ruby-using programs.
The biggest compatibility risk is when spawning external
programs. As a result, stdin, stdout, and stderr are now always
made blocking before exec-family calls.
This change will make an event-oriented MJIT usable if it is
waiting on pipes on POSIX_like platforms.
It is ALSO necessary to take advantage of (proposed lightweight
concurrency (aka "auto-Fiber") or any similar proposal for
network concurrency: https://bugs.ruby-lang.org/issues/13618
Named-pipe (FIFO) are NOT yet non-blocking by default since
they are rarely-used and may introduce compatibility problems
and extra syscall overhead for a common path.
Please revert this commit if there are problems and if I am afk
since I am afk a lot, lately.
[ruby-core:89950] [Bug #14968]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65922 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
by launching MJIT worker thread in child Ruby process.
See the comment before `mjit_child_after_fork` for details.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65785 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
select() is a crap API for even sleeping on sigwait_fd, so favor
the native_sleep-based functions when there are no FDs, instead.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65718 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_thread_struct): introduce new fields `invoke_type`
and `invoke_arg`.
There are two types threads: invoking proc (normal Ruby thread
created by `Thread.new do ... end`) and invoking func, created
by C-API. `invoke_type` shows the types.
* thread.c (thread_do_start): copy `invoke_arg.proc.args` contents
from Array to ALLOCA stack memory if args length is enough small (<8).
We don't need to keep Array and don't need to cancel using transient heap.
* vm.c (thread_mark): For func invoking threads, they can pass (void *)
parameter (rb_thread_t::invoke_arg::func::arg). However, a rubyspec test
(thread_spec.c) passes an Array object and it expect to mark it.
Clealy it is out of scope (misuse of `rb_thread_create` C-API). However,
I'm not sure someone else has such kind of misunderstanding.
So now we mark conservatively this (void *) arg with rb_gc_mark_maybe.
This misuse is found by this error log.
http://ci.rvm.jp/results/trunk-theap-asserts@silicon-docker/1448164
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65622 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It may cause an access to uninitialized variables.
The call to ppoll will set the `revents` field, but ppoll is not always
called because it is in the guard `!RUBY_VM_INTERRUPTED(th->ec)`.
This issue was found by Coverity Scan.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65584 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
poll(2) and ppoll(2) implementations need to check and write to
.revents on the initial scan, anyways. So any poll/ppoll call
which returns a positive result can be expected to have an
initialized .revents value.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65553 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* hash.c, internal.h: support theap for small Hash.
Introduce RHASH_ARRAY (li_table) besides st_table and small Hash
(<=8 entries) are managed by an array data structure.
This array data can be managed by theap.
If st_table is needed, then converting array data to st_table data.
For st_table using code, we prepare "stlike" APIs which accepts hash value
and are very similar to st_ APIs.
This work is based on the GSoC achievement
by tacinight <tacingiht@gmail.com> and refined by ko1.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65454 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The instructions were used only for branch coverage.
Instead, it now uses a trace framework [Feature #14104].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65225 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.ac: introduce new configure option `--enable-mjit` and
`--disable-mjit`. Default is "enable".
`--disable-mjit` disables all of MJIT features so that `ruby --jit`
can't enable MJIT.
This option affect a macro `USE_MJIT`.
This change remove `--enable/disable-install-mjit-header` option.
* Makefile.in: introduce the `ENABLE_MJIT` variable.
* common.mk: use `ENABLE_MJIT` option.
* internal.h: respect `USE_MJIT`. Same as other *.c, *.h.
* test/ruby/test_jit.rb: check `ENABLE_MJIT` key of rbconfg.rb.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65204 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This patch introduces "oneshot_lines" mode for `Coverage.start`, which
checks "whether each line was executed at least once or not", instead of
"how many times each line was executed". A hook for each line is fired
at most once, and after it is fired, the hook flag was removed; it runs
with zero overhead.
See [Feature #15022] in detail.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65195 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
See also ISO9899:1999 section 7.8.1 paragraph 3.
The #ifndef is for C compilers older than C99.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64740 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
../thread.c:1219:18: warning: format specifies type 'unsigned long' but the argument has type 'rb_hrtime_t'
(aka 'unsigned long long') [-Wformat]
end, now);
^~~
../thread.c:1219:23: warning: format specifies type 'unsigned long' but the argument has type 'rb_hrtime_t'
(aka 'unsigned long long') [-Wformat]
end, now);
^~~
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64712 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Another thread may be holding th->interrupt_lock while our
current thread calls fork. Therefore we must reinitialize our
own th->interrupt_lock in the child process because the owner
of the lock is only in the parent. The original parent process
is unaffected. We cannot destroy the lock while it has an unknown
state, either, so some implementations can leak a small amount
of memory, here (NPTL won't).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64707 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Otherwise, th->root_fiber can point to an invalid Fiber,
because Fibers do not live across fork. So consider
whatever Fiber is running the root fiber.
[ruby-core:88723] [Bug #15041]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64589 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Introduce a new rb_thread_sleep_interruptible that does not
execute interrupts before sleeping. Skipping the interrupt
check before sleep is required for out-of-GVL ruby_waitpid_all
to function properly when setting waitpid_state.ret
Now that ubf_select can be called by the gvl.timer thread
without recursive locking gvl.lock, we can safely use
rb_threadptr_interrupt to deal with waking up sleeping
processes,
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64576 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The logic around blocking_region_begin is confusing to me,
but the goal of this patch is to ensure rb_sigwait_fd_get
and rb_sigwait_fd_put are matched.
In other words, we don't want a thread to hold sigwait_fd
forever if an exception is raised while calling select()
or ppoll().
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64550 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
I updated the patch with documentation but forgot about it,
earlier :x
[ruby-core:88616] [Misc #15014]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64535 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Relying on "struct timespec" was too annoying API-wise and
used more stack space. "double" was a bit wacky w.r.t rounding
in the past, so now we'll switch to using a 64-bit type.
Unsigned 64-bit integer is able to give us over nearly 585
years of range with nanoseconds. This range is good enough
for the Linux kernel internal time representation, so it
ought to be good enough for us.
This reduces the stack usage of functions while GVL is held
(and thus subject to marking) on x86-64 Linux (with ppoll):
rb_wait_for_single_fd 120 => 104
do_select 120 => 88
[ruby-core:88582] [Misc #15014]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64533 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Based on r64478, any regular user creating more than 1024 pipes
on Linux will end up with tiny pipes with only a single page
capacity. So avoid wasting user resources and use lighter
eventfd on Linux.
[ruby-core:88563] [Misc #15011]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64527 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Line coverage was based on special instruction "tracecoverage".
Now, instead, it uses the mechanism of trace hook [Feature #14104].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64509 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
When coverage measurement is enabled, the compiler makes each iseq have
a reference to the counter array of coverage.
Even after coverage measurement is disabled, the reference is kept.
And, if coverage measurement is restarted, a coverage hook will increase
the counter. This is completely meaningless; it brings just overhead.
To remove this meaninglessness, this change removes all the reference
when coverage measuement is stopped.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64504 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Following ko1's lead in r59192, this gets rid of non-obvious
assignments which happen inside macros.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64490 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
According to r52446, it is only necessary for the current item (@i),
not the `@nxt` parameter for list_for_each_safe.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64486 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It's possible for the ubf_list_head to be populated with dead
threads at fork or the ubf_list_lock to be held, so reinitialize
both at startup.
And while we're at it, use a static initializer at startup
to save a library call and kill some ifdef.
[ruby-core:88578] [Bug #15013]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64485 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
select(2) needs the nfds argument to be one higher than the
largest FD in the sets :x
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64475 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We do not want to risk switching threads before going to sleep
because it can cause unexpected wakeups and put us in an
unexpected state when used with ConditionVariable.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64464 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Having threads switch before we sleep can cause applications
to misread the state of the thread. Now, we are consistent
with blocking_region_begin behavior and change th->status
AFTER checking interrupts.
Maybe this can fix [Bug #15002]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64449 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Spurious interrupts from SIGCHLD cause Mutex#sleep (via
ConditionVariable#wait) to return early and breaks some use
cases. Since these are outside the programs's control with
MJIT, we will only consider pending interrupts (e.g. those
from Thread#run) and signals which cause a Ruby-level Signal.trap
handler to fire as "spurious" wakeups.
[ruby-core:88537] [Feature #15002]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64444 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Same reasoning as the disarm in rb_sigwait_fd_get, the current
thread is already processing signals, so we do not need
UBF_TIMER to continually kick the process, anymore.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64390 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
On a 64-bit system, this reduces rb_thread_t from 536 to 520 bytes.
Depending on the allocation, this can reduce cacheline access
for checking the abort_on_exception, report_on_exception and
pending_interrupt_queue_checked flags.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64376 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This reverts commit 194a6a2c68 (r64203).
Race conditions which caused the original reversion will be fixed
in the subsequent commit.
[ruby-core:88360] [Misc #14937]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64352 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
nobu
normal
svn
ko1
k0kubun
mame
shyouhei