with non-gcc and/or non-IA32 compilers, e.g. Solaris Studio,
Fujitsu C Compiler. [ruby-dev:46646] [Bug #7451]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37924 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Contributed from fumiyas (Fumiyasu SATOH). Thank you!
[Feature #6757] [ruby-dev:45977]
* configure.in: adds getsid check.
* test/ruby/test_process.rb (TestProcess#test_setsid): new test
for the above.
* NEWS: news for the above.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37825 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
for portability.
As the note, FreeBSD 8 has DTrace as the optional
feature (it is enabled by the build option), but doesn't have USDT.
FreeBSD 9 has USDT but they are still optional. FreeBSD 10 will
enable them by default.
The variable $rb_cv_prog_dtrace_g is "yes" only on FreeBSD 9 with
optional DTrace or FreeBSD 10. If it is "no", you cannnot know
whether it doesn't need -G or DTrace is disabled. (by cheking
error code, you can know)
* configure.in (--enable-dtrace): change help message
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37742 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This reverts commit 029b59ba53.
When $rb_cv_prog_dtrace_g is yes on FreeBSD even if /usr/bin/dtrace
exists, it means dtrace is disabled on the system.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37739 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in (--enable-dtrace): remove ineffective "else AS_CASE ..."
because the variable $rb_cv_prog_dtrace_g is normally "yes" on
FreeBSD and the AS_CASE is not evaluated on FreeBSD.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37735 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in: see enable_dtrace for adding libelf on FreeBSD.
* common.mk: VPATH is not needed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37717 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
based on r26235 by Yugui. On Solaris 10, low optimization level
may also be needed, e.g. optflags="-xO1" or "-xO0" with Oracle
SolarisStudio 12.3 cc.
* configure.in (--enable-dtrace): new option to enable/disable
DTrace support. By default, trying to enable if dtrace command
is found on the system. It is disabled when cross compiling.
* configure.in (RUBY_DTRACE_POSTPROCESS): new macro. checks whether
the dtrace on the system needs postprocessing with "dtrace -G".
The postprocessing is needed on Solaris 10 and other platforms.
* configure.in (RUBY_DTRACE_BSD_BROKEN): new macro. checks whether
the dtrace supports USDT.
* configure.in (DTRACE): move after RUBY_DTRACE_POSTPROCESS.
* configure.in (LD): On Solaris, /usr/ccs/bin/ld is preferred.
* configure.in, Makefile.in, common.mk (DTRACE_OBJ): new macro for
DTrace probe object generated by postprocessing with "dtrace -G".
* Makefile.in, common.mk (probes.$(OBJEXT)): DTrace probe object
generated by the postprocessing. New file probes.stamp is for
rebuilding related objects that may be modified by "dtrace -G".
* configure.in, Makefile.in, common.mk (DTRACE_GLOMMED_OBJ): new
macro for DTrace static library hacks.
* configure.in, Makefile.in (LIBRUBY_A_OBJS): ditto.
* Makefile.in, common.mk (ruby-glommed.$(OBJEXT)): new target with
rule for DTrace static library hacks.
* common.mk (DTRACE_DEPENDENT_OBJS): objects depended on probes.h.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37709 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in (DTRACE): move after AC_PROG_CC since cross_compiling
is set in it.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37677 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in: disable dtrace because it doesn't work on FreeBSD.
* common.mk (clean-local): rm probes.h.
* common.mk (parse.o): depend $(PROBES_H_INCLUDES).
* common.mk (.d.h): moved from Makefile.in and use BASERUBY.
* tool/gen_dummy_probes.rb: reimplemented with ruby because sed is not
available on Windows Microsoft VC++ environment.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37636 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
possible. [ruby-dev:45530] [Feature #6311]
* configure.in: check existence of memmem(3) and that it is not broken.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37634 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* array.c (empty_ary_alloc, ary_new): added array create DTrace probe.
* compile.c (rb_insns_name): allowing DTrace probes to access
instruction sequence name.
* Makefile.in: translate probes.d file to appropriate header file.
* common.mk: declare dependencies on the DTrace header.
* configure.in: add a test for existence of DTrace.
* eval.c (setup_exception): add a probe for when an exception is
raised.
* gc.c: Add DTrace probes for mark begin and end, and sweep begin and
end.
* hash.c (empty_hash_alloc): Add a probe for hash allocation.
* insns.def: Add probes for function entry and return.
* internal.h: function declaration for compile.c change.
* load.c (rb_f_load): add probes for `load` entry and exit, require
entry and exit, and wrapping search_required for load path search.
* object.c (rb_obj_alloc): added a probe for general object creation.
* parse.y (yycompile0): added a probe around parse and compile phase.
* string.c (empty_str_alloc, str_new): DTrace probes for string
allocation.
* test/dtrace/*: tests for DTrace probes.
* vm.c (vm_invoke_proc): add probes for function return on exception
raise, hash create, and instruction sequence execution.
* vm_core.h: add probe declarations for function entry and exit.
* vm_dump.c: add probes header file.
* vm_eval.c (vm_call0_cfunc, vm_call0_cfunc_with_frame): add probe on
function entry and return.
* vm_exec.c: expose instruction number to instruction name function.
* vm_insnshelper.c: add function entry and exit probes for cfunc
methods.
* vm_insnhelper.h: vm usage information is always collected, so
uncomment the functions.
12 19:14:50 2012 Akinori MUSHA <knu@iDaemons.org>
* configure.in (isinf, isnan): isinf() and isnan() are macros on
DragonFly which cannot be found by AC_REPLACE_FUNCS(). This
workaround enforces the fact that they exist on DragonFly.
12 15:59:38 2012 Shugo Maeda <shugo@ruby-lang.org>
* vm_core.h (rb_call_info_t::refinements), compile.c (new_callinfo),
vm_insnhelper.c (vm_search_method): revert r37616 because it's too
slow. [ruby-dev:46477]
* test/ruby/test_refinement.rb (test_inline_method_cache): skip
the test until the bug is fixed efficiently.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37631 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in (isinf, isnan): isinf() and isnan() are macros on
DragonFly which cannot be found by AC_REPLACE_FUNCS(). This
workaround enforces the fact that they exist on DragonFly.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37628 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
inside backquotes, since some traditional shells like PD KSH
(which OpenBSD's /bin/sh bases on) fails to parse them.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37547 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in (visibility_option): visibility attribute is not
available before GCC 4, so do not use -fvisibility option in that
case. [ruby-core:48147] [Bug #7205]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37296 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in (opt-dir): allow multiple directories separated by
$PATH_SEPARATOR as well as dir_config in mkmf.rb. [ruby-core:47868]
[Bug #7120]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37242 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
recursion marking of CRuby needs checking stack overflow and the
fail-safe system, but these systems not good at partial points,
for example, marking deep tree structures. [ruby-dev:46184]
[Feature #7095]
* configure.in (GC_MARK_STACKFRAME_WORD): removed. It's used by
checking stack overflow of marking.
* win32/Makefile.sub (GC_MARK_STACKFRAME_WORD): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37075 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
so LIBRUBY_SO links fine with libexecinfo installed in a
non-system directory.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37062 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in (strict_warnflags): separate strict flags from
warnflags only for core. [ruby-dev:46105]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36979 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in: Don't use PIE on Haiku because loader support is not
enough.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36957 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in (LIBDIR_BASENAME): use configured libdir value to fix
--enable-load-relative on systems where libdir is not default value,
overridden in config.site files. [ruby-core:47267] [Bug #6903]
* ruby.c (ruby_init_loadpath_safe): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36847 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
- omit ANSI standard flags to compile socket extension where
anonymous union is required.
- remove redundant -be flags.
by Takashi Toyoshima <toyoshim@gmail.com>
https://github.com/ruby/ruby/pull/168
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36839 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Rewrites these variables instead of PATH.
NaCl port uses a toolchain which is specified by NACL_SDK_ROOT
environment variable. Originally, NaCl build added the toolchain
under the NACL_SDK_ROOT to the PATH. But updating PATH doesn't work
on Mac.
(RBCONFIG): Replaces configs with the variable updates above.
* configure.in: Thus it is no longer necessary to check $PATH.
Based on a patch by Takashi Toyoshima <toyoshim AT gmail.com>.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36828 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in (mingw): add shlwapi to the list of dependency
libs for Windows.
* win32/Makefile.sub (EXTSOLIBS): ditto.
* internal.h: declare internal functions rb_w32_init_file,
rb_file_expand_path_internal and rb_file_expand_path_fast.
* file.c (Init_File): invoke Windows initialization rb_w32_init_file
* win32/file.c (rb_file_load_path_internal): new function.
Windows-specific implementation that replaces file_expand_path.
[Bug #6836][ruby-core:46996]
* win32/file.c (rb_w32_init_file): new function. Initialize codepage
cache for faster conversion encodings lookup.
* file.c (file_expand_path): rename to rb_file_expand_path_internal.
Conditionally exclude from Windows.
* file.c (rb_file_expand_path_fast): new function. delegates to
rb_file_expand_path_internal without performing a hit to the
filesystem.
* file.c (file_expand_path_1): use rb_file_expand_path_internal without
path expansion (used by require).
* file.c (rb_find_file_ext_safe): ditto.
* file.c (rb_find_file_safe): ditto.
* load.c (rb_get_expanded_load_path): use rb_file_expand_path_fast.
* load.c (rb_feature_provided): ditto.
* file.c (rb_file_expand_path): use rb_file_expand_path_internal with
path expansion.
* file.c (rb_file_absolute_path): ditto.
* test/ruby/test_file_exhaustive.rb: new tests to exercise
rb_file_expand_path_internal implementation and compliance with
existing behaviors.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36811 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
- -lbe is not required for linking
- stack protector doesn't work for now because of the default gcc's bug
by Takashi Toyoshima <toyoshim@gmail.com>
https://github.com/ruby/ruby/pull/167
* signal.c (ruby_signal): haiku doesn't have SIGBUS.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36791 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
implementation but has no declaration and does not work in
NativeClient SDK pepper_20.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36768 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in: use noral blocks instead of dnl, so that matching
parentheses would match.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36762 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in: escape #-marks, so that matching parentheses would
match.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36760 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in (RUBY_CHECK_SIZEOF): use single test instead of split
bare case statement, so that matching parentheses would match.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36759 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in (MINIRUBY): use real path for include path.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36672 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
the use of Snow Leopard's old clang. see also r36594, r36610, r36611.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36624 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in: use clang prior to gcc only when self-compiling on
darwin. search default compilers on other platforms. [Bug #6816]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36611 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
naruse
ngoto
kosaki
nobu
glass
tenderlove
knu
nari
eregon
yugui
luislavena