* YJIT: Replace Array#each only when YJIT is enabled
* Add comments about BUILTIN_ATTR_C_TRACE
* Make Ruby Array#each available with --yjit as well
* Fix all paths that expect a C location
* Use method_basic_definition_p to detect patches
* Copy a comment about C_TRACE flag to compilers
* Rephrase a comment about add_yjit_hook
* Give METHOD_ENTRY_BASIC flag to Array#each
* Add --yjit-c-builtin option
* Allow inconsistent source_location in test-spec
* Refactor a check of BUILTIN_ATTR_C_TRACE
* Set METHOD_ENTRY_BASIC without touching vm->running
* YJIT: Add `--yjit-compilation-log` flag to print out the compilation log at exit.
* YJIT: Add an option to enable the compilation log at runtime.
* YJIT: Fix a typo in the `IseqPayload` docs.
* YJIT: Add stubs for getting the YJIT compilation log in memory.
* YJIT: Add a compilation log based on a circular buffer to cap the log size.
* YJIT: Allow specifying either a file or directory name for the YJIT compilation log.
The compilation log will be populated as compilation events occur. If a directory is supplied, then a filename based on the PID will be used as the write target. If a file name is supplied instead, the log will be written to that file.
* YJIT: Add JIT compilation of C function substitutions to the compilation log.
* YJIT: Add compilation events to the circular buffer even if output is sent to a file.
Previously, the two modes were treated as being exclusive of one another. However, it could be beneficial to log all events to a file while also allowing for direct access of the last N events via `RubyVM::YJIT.compilation_log`.
* YJIT: Make timestamps the first element in the YJIT compilation log tuple.
* YJIT: Stream log to stderr if `--yjit-compilation-log` is supplied without an argument.
* YJIT: Eagerly compute compilation log messages to avoid hanging on to references that may GC.
* YJIT: Log all compiled blocks, not just the method entry points.
* YJIT: Remove all compilation events other than block compilation to slim down the log.
* YJIT: Replace circular buffer iterator with a consuming loop.
* YJIT: Support `--yjit-compilation-log=quiet` as a way to activate the in-memory log without printing it.
Co-authored-by: Randy Stauner <randy.stauner@shopify.com>
* YJIT: Promote the compilation log to being the one YJIT log.
Co-authored-by: Randy Stauner <randy.stauner@shopify.com>
* Update doc/yjit/yjit.md
* Update doc/yjit/yjit.md
---------
Co-authored-by: Randy Stauner <randy.stauner@shopify.com>
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
* YJIT: Encode doubles to VALUE objects and move stat generation to rust
Stats that can now be generated from rust have been moved there.
* Move object_shape_count call for runtime_stats to rust
This reduces the ruby method to a single primitive.
* Change hash_aset_usize from macro to function
Calls to defer_compilation() leave behind a stub and a `struct Block`
that we retain. If the block is empty, it only exits to hold the
`struct Branch` that the stub needs.
This patch transplants the branch out of the empty block into the newly
generated block when the defer_compilation() stub is hit, and deletes
the empty block to save memory.
To assist the transplantation, `Block::outgoing` is now a
`MutableBranchList`, and `Branch::Block` now in a `Cell`. These types
don't incur a size cost.
On the `lobsters` benchmark, `yjit_alloc_size` is roughly 98% of what
it was before the change.
Co-authored-by: Kevin Menard <kevin.menard@shopify.com>
Co-authored-by: Randy Stauner <randy@r4s6.net>
Co-authored-by: Maxime Chevalier-Boisvert <maxime.chevalierboisvert@shopify.com>
* YJIT: add context cache hits stat
This stat should make more sense when it comes to interpreting
the effectiveness of the cache on large deployed apps.
* Implement BitVector data structure for variable-length context encoding
* Rename method to make intent clearer
* Rename write_uint => push_uint to make intent clearer
* Implement debug trait for BitVector
* Fix bug in BitVector::read_uint_at(), enable more tests
* Add one more test for good measure
* Start sketching Context::encode()
* Progress on variable length context encoding
* Add tests. Fix bug.
* Encode stack state
* Add comments. Try to estimate context encoding size.
* More compact encoding for stack size
* Commit before rebase
* Change Context::encode() to take a BitVector as input
* Refactor BitVector::read_uint(), add helper read functions
* Implement Context::decode() function. Add test.
* Fix bug, add tests
* Rename methods
* Add Context::encode() and decode() methods using global data
* Make encode and decode methods use u32 indices
* Refactor YJIT to use variable-length context encoding
* Tag functions as allow unused
* Add a simple caching mechanism and stats for bytes per context etc
* Add comments, fix formatting
* Grow vector of bytes by 1.2x instead of 2x
* Add debug assert to check round-trip encoding-decoding
* Take some rustfmt formatting
* Add decoded_from field to Context to reuse previous encodings
* Remove olde context stats
* Re-add stack_size assert
* Disable decoded_from optimization for now
* YJIT: print msg to stderr when RubyVM::YJIT.disasm not available
Print a more useful error message when people try to use this
feature without YJIT dev.
Also fix an issue with .gitignore file on macOS
* Update yjit.rb
Co-authored-by: Randy Stauner <randy@r4s6.net>
* Use warn and always return nil if YJIT disasm not available.
---------
Co-authored-by: Randy Stauner <randy@r4s6.net>
* YJIT: Lazily push a frame for specialized C funcs
Co-authored-by: Maxime Chevalier-Boisvert <maxime.chevalierboisvert@shopify.com>
* Fix a comment on pc_to_cfunc
* Rename rb_yjit_check_pc to rb_yjit_lazy_push_frame
* Rename it to jit_prepare_lazy_frame_call
* Fix a typo
* Optimize String#getbyte as well
* Optimize String#byteslice as well
---------
Co-authored-by: Maxime Chevalier-Boisvert <maxime.chevalierboisvert@shopify.com>
* YJIT: Specialize splatkw on T_HASH
* Fix a typo
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
* Fix a few more comments
---------
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
* YJIT: specialized codegen for integer right shift
Used in optcarrot. May also be used to write pure-Ruby gems.
No overflow check or fixnum untagging required.
* Update yjit/src/codegen.rs
Co-authored-by: Takashi Kokubun <takashikkbn@gmail.com>
---------
Co-authored-by: Takashi Kokubun <takashikkbn@gmail.com>
* YJIT: record num_send_cfunc stat
Also report num_send_known_cfunc as percentage of num_send_cfunc
* Rename num_send_known_cfunc => num_send_cfunc_inline
Name seems more descriptive of what we do with out custom codegen
* Weaken notice about API stability. A few public APIs in here now.
* Prune out APIs from the docs that are private in nature
* Enable markdown mode and ensure `--` options are quoted so they are
rendered as two dashes in the HTML.
For <https://bugs.ruby-lang.org/issues/19921>, I suspect the test is
failing due to a timing related interrupt, which on paper could
happen with slow-enough GC runs.
In any case, it's helpful for debugging to have more information when
tests fail.
Co-authored-by: Takashi Kokubun <takashikkbn@gmail.com>
It's an estimator for application size and could be used as a
compilation heuristic later.
Co-authored-by: Maxime Chevalier-Boisvert <maxime.chevalierboisvert@shopify.com>
Co-authored-by: Takashi Kokubun <takashikkbn@gmail.com>
* Port call threshold logic from Rust to C for performance
* Prefix global/field names with yjit_
* Fix linker error
* Fix preprocessor condition for rb_yjit_threshold_hit
* Fix third linker issue
* Exclude yjit_calls_at_interv from RJIT bindgen
---------
Co-authored-by: Takashi Kokubun <takashikkbn@gmail.com>
Takashi Kokubun
Kevin Menard
Randy Stauner
Alan Wu
Maxime Chevalier-Boisvert
Nobuyoshi Nakada
Alan Wu
Mau Magnaguagno
ywenc