It free `rb_hook_list_t` itself if needed. To recognize the
need, this patch introduced `rb_hook_list_t::is_local` flag.
This patch is succession of https://github.com/ruby/ruby/pull/4652
In general, while TracePoint callback is running,
other registerred callbacks are not called to avoid
confusion by reentrace.
This method allow the reentrace. This method should be
used carefully, otherwize the callback can be easily called
infinitely.
[Feature #15912]
Co-authored-by: Jean Boussier <jean.boussier@gmail.com>
The main impetus for this change is to fix [Bug #13392]. Previously, we
fired the "return" TracePoint event after popping the stack frame for
the block running as method (BMETHOD). This gave undesirable source
location outputs as the return event normally fires right before the
frame going away.
The iseq for each block can run both as a block and as a method. To
accommodate that, this commit makes vm_trace() fire call/return events for
instructions that have b_call/b_return events attached when the iseq is
running as a BMETHOD. The logic for rewriting to "trace_*" instruction
is tweaked so that when the user listens to call/return events,
instructions with b_call/b_return become trace variants.
To continue to provide the return value for non-local returns done using
the "return" or "break" keyword inside BMETHODs, the stack unwinding
code is tweaked. b_return events now provide the same return value as
return events for these non-local cases. A pre-existing test deemed not
providing a return value for these b_return events as a limitation.
This commit removes the checks for call/return TracePoint events that
happen when calling into BMETHODs when no TracePoints are active.
Technically, migrating just the return event is enough to fix the bug,
but migrating both call and return removes our reliance on
`VM_FRAME_FLAG_FINISH` and re-entering the interpreter when the caller
is already in the interpreter.
After 5680c38c75, postponed job APIs now
expect to be called on native threads not managed by Ruby and handles
getting a NULL execution context. However, in debug builds the change
runs into an assertion failure with GET_EC() which asserts that EC is
non-NULL. Avoid the assertion failure by passing `false` for `expect_ec`
instead as the intention is to handle when there is no EC.
Add a test from John Crepezzi and John Hawthorn to exercise this
situation.
See GH-4108
See GH-5094
[Bug #17573]
Co-authored-by: John Hawthorn <john@hawthorn.email>
Co-authored-by: John Crepezzi <john.crepezzi@gmail.com>
For upstreaming, we want functions we export either prefixed with "rb_"
or made static. Historically we haven't been following this rule, so we
were "leaking" a lot of symbols as `make leak-globals` would tell us.
This change unifies everything YJIT into a single compilation unit,
yjit.o, and makes everything unprefixed static to pass `make leak-globals`.
This manual "unified build" setup is similar to that of vm.o.
Having everything in one compilation unit allows static functions to
be visible across YJIT files and removes the need for declarations in
headers in some cases. Unnecessary declarations were removed.
Other changes of note:
- switched to MJIT_SYMBOL_EXPORT_BEGIN which indicates stuff as being
off limits for native extensions
- the first include of each YJIT file is change to be "internal.h"
- undefined MAP_STACK before explicitly redefining it since it
collide's with a definition in system headers. Consider renaming?
This change fixes some cases where YJIT fails to fire tracing events.
Most of the situations YJIT did not handle correctly involves enabling
tracing while running inside generated code.
A new operation to invalidate all generated code is added, which uses
patching to make generated code exit at the next VM instruction
boundary. A new routine called `jit_prepare_routine_call()` is
introduced to facilitate this and should be used when generating code
that could allocate, or could otherwise use `RB_VM_LOCK_ENTER()`.
The `c_return` event is fired in the middle of an instruction as opposed
to at an instruction boundary, so it requires special handling. C method
call return points are patched to go to a fucntion which does everything
the interpreter does, including firing the `c_return` event. The
generated code for C method calls normally does not fire the event.
Invalided code should not change after patching so the exits are not
clobbered. A new variable is introduced to track the region of code that
should not change.
In vm_call_method_each_type, check for c_call and c_return events before
dispatching to vm_call_ivar and vm_call_attrset. With this approach, the
call cache will still dispatch directly to those functions, so this
change will only decrease performance for the first (uncached) call, and
even then, the performance decrease is very minimal.
This approach requires that we clear the call caches when tracing is
enabled or disabled. The approach currently switches all vm_call_ivar
and vm_call_attrset call caches to vm_call_general any time tracing is
enabled or disabled. So it could theoretically result in a slowdown for
code that constantly enables or disables tracing.
This approach does not handle targeted tracepoints, but from my testing,
c_call and c_return events are not supported for targeted tracepoints,
so that shouldn't matter.
This includes a benchmark showing the performance decrease is minimal
if detectable at all.
Fixes [Bug #16383]
Fixes [Bug #10470]
Co-authored-by: Takashi Kokubun <takashikkbn@gmail.com>
iff means if and only if, but readers without that knowledge might
assume this to be a spelling mistake. To me, this seems like
exclusionary language that is unnecessary. Simply using "if and only if"
instead should suffice.
separate some fields from rb_ractor_t to rb_ractor_pub and put it
at the beggining of rb_ractor_t and declare it in vm_core.h so
vm_core.h can access rb_ractor_pub fields.
Now rb_ec_ractor_hooks() is a complete inline function and no
MJIT related issue.
This commit introduces Ractor mechanism to run Ruby program in
parallel. See doc/ractor.md for more details about Ractor.
See ticket [Feature #17100] to see the implementation details
and discussions.
[Feature #17100]
This commit does not complete the implementation. You can find
many bugs on using Ractor. Also the specification will be changed
so that this feature is experimental. You will see a warning when
you make the first Ractor with `Ractor.new`.
I hope this feature can help programmers from thread-safety issues.
* Fix debug documents to match Thread#to_s change (Feature #16412 ticket)
* TracePoint#inspect returns "... file:line" (Feature #16513)
* Guard older version of Ruby in Tracepoint inspection tests
* Focus on current thread only when running TracePoint inspection test
Since 0c2d81dada, not all trace events are cleared during VM teardown.
This causes a crash when there is a tracepoint for
`RUBY_INTERNAL_EVENT_GC_EXIT` active during teardown.
The commit looks like a refactoring commit so I think this change was
unintentional.
[Bug #16682]
Saves comitters' daily life by avoid #include-ing everything from
internal.h to make each file do so instead. This would significantly
speed up incremental builds.
We take the following inclusion order in this changeset:
1. "ruby/config.h", where _GNU_SOURCE is defined (must be the very
first thing among everything).
2. RUBY_EXTCONF_H if any.
3. Standard C headers, sorted alphabetically.
4. Other system headers, maybe guarded by #ifdef
5. Everything else, sorted alphabetically.
Exceptions are those win32-related headers, which tend not be self-
containing (headers have inclusion order dependencies).
exec_hooks_postcheck() clean executed hook_list if it is needed.
list_exec is freed if there are no events and this list is local
event (connected to specific iseq). However, iseq keeps to point
this local hook_list, freed list. To prevent this situation,
do not free hook_list here even if it has no events.
This issue is reported by @joker1007.
https://twitter.com/joker1007/status/1153649170797830144
* vm_trace.c: add `script_compiled` event. This event invoked
after script compiling and before evaluating compiled script.
Also the following methods are added:
`TracePoint#compiled_instruction_sequence` method to get compiled
`RubyVM::InstructionSequence` instance.
`TracePoint#compiled_eval_script` method to get compiled script (String)
by *eval methods (return nil if compiling by file).
* vm_trace.c (tracepoint_attr_raised_exception):
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66249 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
postponed_job is safe to use in signal handlers, but is not
thread-safe for MJIT. Implement a workqueue for MJIT
thread-safety.
[Bug #15316]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66100 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c: `TracePoint#enable(target_line:)` is supported.
This option enables a hook only at specified target_line.
target_line should be combination with target and :line event.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66008 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c (rb_tracepoint_enable_for_target): support targetting
TracePoint. [Feature #15289]
Tragetting TracePoint is only enabled on specified method, proc
and so on, example: `tp.enable(target: code)`.
`code` should be consisted of InstructionSeuqnece (iseq)
(RubyVM::InstructionSeuqnece.of(code) should not return nil)
If code is a tree of iseq, TracePoint is enabled on all of
iseqs in a tree.
Enabled tragetting TracePoints can not enabled again with
and without target.
* vm_core.h (rb_iseq_t): introduce `rb_iseq_t::local_hooks`
to store local hooks.
`rb_iseq_t::aux::trace_events` is renamed to
`global_trace_events` to contrast with `local_hooks`.
* vm_core.h (rb_hook_list_t): add `rb_hook_list_t::running`
to represent how many Threads/Fibers are used this list.
If this field is 0, nobody using this hooks and we can
delete it.
This is why we can remove code from cont.c.
* vm_core.h (rb_vm_t): because of above change, we can eliminate
`rb_vm_t::trace_running` field.
Also renamed from `rb_vm_t::event_hooks` to `global_hooks`.
* vm_core.h, vm.c (ruby_vm_event_enabled_global_flags): renamed
from `ruby_vm_event_enabled_flags.
* vm_core.h, vm.c (ruby_vm_event_local_num): added to count
enabled targetting TracePoints.
* vm_core.h, vm_trace.c (rb_exec_event_hooks): accepts
hook list.
* vm_core.h (rb_vm_global_hooks): added for convinience.
* method.h (rb_method_bmethod_t): added to maintain Proc
and `rb_hook_list_t` for bmethod (defined by define_method).
* prelude.rb (TracePoint#enable): extracet a keyword parameter
(because it is easy than writing in C).
It calls `TracePoint#__enable` internal method written in C.
* vm_insnhelper.c (vm_trace): check also iseq->local_hooks.
* vm.c (invoke_bmethod): check def->body.bmethod.hooks.
* vm.c (hook_before_rewind): check iseq->local_hooks
and def->body.bmethod.hooks before rewind by exception.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66003 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
ec->interrupt_mask will remain rb_atomic_t and is 32-bit on some
64-bit systems while "unsigned long" is 64-bits. So avoid
mismatching lengths and stick to rb_atomic_t.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65781 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* inits.c: call `Init_vm_postponed_job` first because
postponed_job is used by transient heap.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65628 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This reverts commit 5a1dfb04bc (r63451)
And mark the functions as async-signal-safe while we're at it to
prevent future developers from making the same mistake as I did :x
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65316 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Koichi Sasada
Alan Wu
Peter Zhu
S-H-GAMELINKS
卜部昌平
Jeremy Evans
Takashi Kokubun
Nobuyoshi Nakada
Gannon McGibbon
Nguyễn Quang Minh
kazu
nobu
hsbt
ko1
svn
normal
k0kubun