* vm_eval.c (rb_eval_cmd, rb_catch_obj): use TH_JUMP_TAG with the
same rb_thread_t used for TH_PUSH_TAG, instead of JUMP_TAG with
the current thread global variable.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54914 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (ruby_cleanup): reuse same VM tag by managing steps.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54723 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval_error.c (error_print, error_handle): reuse same threadptr
by passing as an argument.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54722 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* error.c (rb_compile_err_append): rb_thread_t::base_block is no
longer used.
* iseq.c (rb_iseq_compile_with_option): ditto, no protection is
needed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54345 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (setup_exception): set the cause only if it is explicitly
given or not set yet. [Bug #12068]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53819 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (ignored_block): warn if a block is given to `using`,
which is probably for `Module.new`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53368 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
CREFs should not be shared by methods between `using'.
[Bug #11247]
* vm_insnhelper.c (vm_cref_replace_with_duplicated_cref): ditto.
* vm.c (vm_cref_dup): should copy refinements correctly.
* eval.c: use rb_vm_cref_replace_with_duplicated_cref().
* eval_intern.h: add a decl. of
rb_vm_cref_replace_with_duplicated_cref().
* vm_eval.c (eval_string_with_cref): do not need to pass
scope's CREF because VM can find out CREF from stack frames.
* test/ruby/test_refinement.rb: add a test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52677 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Shutting down the timer thread now always closes pipes to free FDs.
In fact, we close the write ends of the pipes is done in the main
RubyVM to signal the timer thread shutdown.
To effectively close pipes, we implement userspace locks via
atomics to force the pipe closing thread to wait on any signal
handlers which may be waking up.
While we're at it, improve robustness during resource exhaustion and
allow it to limp along non-fatally if restarting a timer thread
fails.
This reverts r51268
Note: this change is tested with VM_CHECK_MODE 1 in vm_core.h
* process.c (close_unless_reserved): add extra check
(dup2_with_divert): remove
(redirect_dup2): use dup2 without divert
(before_exec_non_async_signal_safe): adjust call + comment
(rb_f_exec): stop timer thread for all OSes
(rb_exec_without_timer_thread): remove
* eval.c (ruby_cleanup): adjust call
* thread.c (rb_thread_stop_timer_thread): always close pipes
* thread_pthread.c (struct timer_thread_pipe): add writing field,
mark owner_process volatile for signal handlers
(rb_thread_wakeup_timer_thread_fd): check valid FD
(rb_thread_wakeup_timer_thread): set writing flag to prevent close
(rb_thread_wakeup_timer_thread_low): ditto
(CLOSE_INVALIDATE): new macro
(close_invalidate): new function
(close_communication_pipe): removed
(setup_communication_pipe_internal): make errors non-fatal
(setup_communication_pipe): ditto
(thread_timer): close reading ends inside timer thread
(rb_thread_create_timer_thread): make errors non-fatal
(native_stop_timer_thread): close write ends only, always,
wait for signal handlers to finish
(rb_divert_reserved_fd): remove
* thread_win32.c (native_stop_timer_thread): adjust (untested)
(rb_divert_reserved_fd): remove
* vm_core.h: adjust prototype
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51576 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
All contents of previous rb_iseq_t is in rb_iseq_t::body.
Remove rb_iseq_t::self because rb_iseq_t is an object.
RubyVM::InstructionSequence is wrapper object points T_IMEMO/iseq.
So RubyVM::ISeq.of(something) method returns different wrapper
objects but they point the same T_IMEMO/iseq object.
This patch is big, but most of difference is replacement of
iseq->xxx to iseq->body->xxx.
(previous) rb_iseq_t::compile_data is also located to
rb_iseq_t::compile_data.
It was moved from rb_iseq_body::compile_data.
Now rb_iseq_t has empty two pointers.
I will split rb_iseq_body data into static data and dynamic data.
* compile.c: rename some functions/macros.
Now, we don't need to separate iseq and iseqval (only VALUE).
* eval.c (ruby_exec_internal): `n' is rb_iseq_t (T_IMEMO/iseq).
* ext/objspace/objspace.c (count_imemo_objects): count T_IMEMO/iseq.
* gc.c: check T_IMEMO/iseq.
* internal.h: add imemo_type::imemo_iseq.
* iseq.c: define RubyVM::InstructionSequnce as T_OBJECT.
Methods are implemented by functions named iseqw_....
* load.c (rb_load_internal0): rb_iseq_new_top() returns
rb_iseq_t (T_IMEMO/iesq).
* method.h (rb_add_method_iseq): accept rb_iseq_t (T_IMEMO/iseq).
* vm_core.h (GetISeqPtr): removed because it is not T_DATA now.
* vm_core.h (struct rb_iseq_body): remove padding for
[Bug #10037][ruby-core:63721].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51327 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (ruby_cleanup): error_handle() returns exit status to the
system, not internal error state, do not convert the exit status
again.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51290 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_control_frame_t::klass.
[Bug #11278], [Bug #11279]
rb_method_entry_t data belong to modules/classes.
rb_method_entry_t::owner points defined module or class.
module M
def foo; end
end
In this case, owner is M.
rb_callable_method_entry_t data belong to only classes.
For modules, MRI creates corresponding T_ICLASS internally.
rb_callable_method_entry_t can also belong to T_ICLASS.
rb_callable_method_entry_t::defined_class points T_CLASS or
T_ICLASS.
rb_method_entry_t data for classes (not for modules) are also
rb_callable_method_entry_t data because it is completely same data.
In this case, rb_method_entry_t::owner == rb_method_entry_t::defined_class.
For example, there are classes C and D, and incldues M,
class C; include M; end
class D; include M; end
then, two T_ICLASS objects for C's super class and D's super class
will be created.
When C.new.foo is called, then M#foo is searcheed and
rb_callable_method_t data is used by VM to invoke M#foo.
rb_method_entry_t data is only one for M#foo.
However, rb_callable_method_entry_t data are two (and can be more).
It is proportional to the number of including (and prepending)
classes (the number of T_ICLASS which point to the module).
Now, created rb_callable_method_entry_t are collected when
the original module M was modified. We can think it is a cache.
We need to select what kind of method entry data is needed.
To operate definition, then you need to use rb_method_entry_t.
You can access them by the following functions.
* rb_method_entry(VALUE klass, ID id);
* rb_method_entry_with_refinements(VALUE klass, ID id);
* rb_method_entry_without_refinements(VALUE klass, ID id);
* rb_resolve_refined_method(VALUE refinements, const rb_method_entry_t *me);
To invoke methods, then you need to use rb_callable_method_entry_t
which you can get by the following APIs corresponding to the
above listed functions.
* rb_callable_method_entry(VALUE klass, ID id);
* rb_callable_method_entry_with_refinements(VALUE klass, ID id);
* rb_callable_method_entry_without_refinements(VALUE klass, ID id);
* rb_resolve_refined_method_callable(VALUE refinements, const rb_callable_method_entry_t *me);
VM pushes rb_callable_method_entry_t, so that rb_vm_frame_method_entry()
returns rb_callable_method_entry_t.
You can check a super class of current method by
rb_callable_method_entry_t::defined_class.
* method.h: renamed from rb_method_entry_t::klass to
rb_method_entry_t::owner.
* internal.h: add rb_classext_struct::callable_m_tbl to cache
rb_callable_method_entry_t data.
We need to consider abotu this field again because it is only
active for T_ICLASS.
* class.c (method_entry_i): ditto.
* class.c (rb_define_attr): rb_method_entry() does not takes
defiend_class_ptr.
* gc.c (mark_method_entry): mark RCLASS_CALLABLE_M_TBL() for T_ICLASS.
* cont.c (fiber_init): rb_control_frame_t::klass is removed.
* proc.c: fix `struct METHOD' data structure because
rb_callable_method_t has all information.
* vm_core.h: remove several fields.
* rb_control_frame_t::klass.
* rb_block_t::klass.
And catch up changes.
* eval.c: catch up changes.
* gc.c: ditto.
* insns.def: ditto.
* vm.c: ditto.
* vm_args.c: ditto.
* vm_backtrace.c: ditto.
* vm_dump.c: ditto.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
* vm_method.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51126 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Motivation and new data structure are described in [Bug #11203].
This patch also solve the following issues.
* [Bug #11200] Memory leak of method entries
* [Bug #11046] __callee__ returns incorrect method name in orphan
proc
* test/ruby/test_method.rb: add a test for [Bug #11046].
* vm_core.h: remvoe rb_control_frame_t::me. me is located at value
stack.
* vm_core.h, gc.c, vm_method.c: remove unlinked_method... codes
because method entries are simple VALUEs.
* method.h: Now, all method entries has own independent method
definititons. Strictly speaking, this change is not essential,
but for future changes.
* rb_method_entry_t::flag is move to rb_method_definition_t::flag.
* rb_method_definition_t::alias_count is now
rb_method_definition_t::alias_count_ptr, a pointer to the counter.
* vm_core.h, vm_insnhelper.c (rb_vm_frame_method_entry) added to
search the current method entry from value stack.
* vm_insnhelper.c (VM_CHECK_MODE): introduced to enable/disable
assertions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50728 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
throwing data. Also define accessor functions.
* eval_intern.h: move related changes into vm_insnhelper.h.
Now these MACROs (functions) are only used in vm*.c.
There is only THROW_DATA_P(err) to check this data type or not.
* vm.c: catch up these changes.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49921 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_cref_t is data type of CREF. Now, the body is still NODE.
It is easy to understand what is CREF and what is pure NODE.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49897 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* CREF_CLASS(cref)
* CREF_NEXT(cref)
* CREF_VISI(cref)
* CREF_VISI_SET(cref, v)
* CREF_REFINEMENTS(cref)
* CREF_PUSHED_BY_EVAL(cref)
* CREF_PUSHED_BY_EVAL_SET(cref)
* CREF_OMOD_SHARED(cref)
* CREF_OMOD_SHARED_SET(cref)
* CREF_OMOD_SHARED_UNSET(cref)
This is process to change CREF data type from NODE.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49894 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
struct method_table_wrapper was introduced to avoid duplicate marking
for method tables.
For example, `module M1; def foo; end; end` make one method table
(mtbl) contains a method `foo`. M1 (T_MODULE) points mtbl.
Classes C1 and C2 includes M1, then two T_ICLASS objects are created
and they points mtbl too. In this case, three objects (one T_MODULE
and two T_ICLASS objects) points same mtbl. On marking phase, these
three objects mark same mtbl. To avoid such duplication, struct
method_table_wrapper was introduced.
However, created two T_ICLASS objects have same or shorter lifetime
than M1 (T_MODULE) object. So that we only need to mark mtbl from M1,
not from T_ICLASS objects. This patch tries marking only from M1.
Note that one `Module#prepend` call creates two T_ICLASS objects.
One for refering to a prepending Module object, same as
`Module#include`. We don't nedd to care this T_ICLASS.
One for moving original mtbl from a prepending class. We need to
mark such mtbl from this T_ICLASS object. To mark the mtbl,
we need to use `RCLASS_ORIGIN(klass)` on marking from a prepended
class `klass`.
* class.c: ditto.
* eval.c (rb_using_refinement): ditto.
* gc.c: ditto.
* include/ruby/ruby.h: define m_tbl directly. The definition of
struct RClass should be moved to (srcdir)/internal.h.
* method.h: remove decl of rb_free_m_tbl_wrapper().
* object.c: use RCLASS_M_TBL() directly.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49862 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (setup_exception): use the given thread instead of
implicit current thread.
* load.c (rb_load_internal0): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49709 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Unsupressable error message is not a good idea.
Note that the message is printed sometimes with following
code (highly timing dependent, though):
pid = spawn("ruby -e ''"); Process.kill(:TERM, pid)
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49103 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (rb_frame_last_func): return the most recent frame method
name.
* thread.c (recursive_list_access): use the last method name,
instead of the current method name which can be unset in some
cases, not to use a symbol by the invalid ID.
[ruby-core:66742] [Bug #10579]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48744 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* defs/id.def: add :mesg and :exception and move from other
sources.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48457 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (rb_frozen_class_p): fix message for singleton class of
class/module as same as previous versions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47568 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* include/ruby/ruby.h (rb_obj_freeze_inline): propagate freezing
to the singleton class if it is existing.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47557 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
make and register special exceptions.
* vm.c (rb_vm_mark): do not need to mark special exceptions
because they are registerd by rb_gc_register_mark_object().
* eval.c (Init_eval): use rb_vm_register_special_exception().
* gc.c (Init_GC): ditto.
* proc.c (Init_Proc): ditto.
* thread.c (Init_Thread): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47534 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (setup_exception): should not overwrite SystemStackError
backtrace if set already. [ruby-core:63377] [Feature #6216]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46594 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (setup_exception): get rid of method calls before raising
stack overflow, not to cause stack overflow again.
* defs/id.def: add IDs for backtraces.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46593 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
sysstack_error_p(mesg) are duplicated.
r46502 seems to want to use latter.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46531 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (setup_exception): set backtrace in system stack error
other than the pre-allocated sysstack_error. [Feature #6216]
* proc.c (Init_Proc): freeze the pre-allocated sysstack_error.
* vm_insnhelper.c (vm_stackoverflow): raise new instance for each
times without calling any methods to keep the backtrace with no
further stack overflow.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46502 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (extract_raise_opts): pass unknown options to the
exception, so that exception class can receive a hash argument.
[ruby-core:63203] [Feature #8257]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46456 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
nobu
ko1
normal
shugo
akr
naruse