* vm_core.h (ENABLE_VM_OBJSPACE): disable now, as socklist and
conlist will be freed exit_handler(), after object space
destruction.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51883 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (ENABLE_VM_OBJSPACE): enable per-VM object space on
Windows by default, as rb_w32_sysinit() no longer depends on
ruby_xmalloc.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51880 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c: introduce shortcut functions for opt_pc == 0
because opt_pc is always 0 on shortcut function.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51827 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Shutting down the timer thread now always closes pipes to free FDs.
In fact, we close the write ends of the pipes is done in the main
RubyVM to signal the timer thread shutdown.
To effectively close pipes, we implement userspace locks via
atomics to force the pipe closing thread to wait on any signal
handlers which may be waking up.
While we're at it, improve robustness during resource exhaustion and
allow it to limp along non-fatally if restarting a timer thread
fails.
This reverts r51268
Note: this change is tested with VM_CHECK_MODE 1 in vm_core.h
* process.c (close_unless_reserved): add extra check
(dup2_with_divert): remove
(redirect_dup2): use dup2 without divert
(before_exec_non_async_signal_safe): adjust call + comment
(rb_f_exec): stop timer thread for all OSes
(rb_exec_without_timer_thread): remove
* eval.c (ruby_cleanup): adjust call
* thread.c (rb_thread_stop_timer_thread): always close pipes
* thread_pthread.c (struct timer_thread_pipe): add writing field,
mark owner_process volatile for signal handlers
(rb_thread_wakeup_timer_thread_fd): check valid FD
(rb_thread_wakeup_timer_thread): set writing flag to prevent close
(rb_thread_wakeup_timer_thread_low): ditto
(CLOSE_INVALIDATE): new macro
(close_invalidate): new function
(close_communication_pipe): removed
(setup_communication_pipe_internal): make errors non-fatal
(setup_communication_pipe): ditto
(thread_timer): close reading ends inside timer thread
(rb_thread_create_timer_thread): make errors non-fatal
(native_stop_timer_thread): close write ends only, always,
wait for signal handlers to finish
(rb_divert_reserved_fd): remove
* thread_win32.c (native_stop_timer_thread): adjust (untested)
(rb_divert_reserved_fd): remove
* vm_core.h: adjust prototype
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51576 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to iseq.h because this function is shared with iseq.c and compile.c.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51565 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_call_info_kw_arg_bytes): extract from compile.c
* compile.c (iseq_build_callinfo_from_hash): use above function
This will be use for implementing iseq_memsize
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51546 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_iseq_constant_body::param::keyword.
* compile.c: catch up this fix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51367 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_iseq_param_keyword::table and
rb_iseq_param_keyword::default_values.
* compile.c: catch up this fix.
* iseq.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51357 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
All contents of previous rb_iseq_t is in rb_iseq_t::body.
Remove rb_iseq_t::self because rb_iseq_t is an object.
RubyVM::InstructionSequence is wrapper object points T_IMEMO/iseq.
So RubyVM::ISeq.of(something) method returns different wrapper
objects but they point the same T_IMEMO/iseq object.
This patch is big, but most of difference is replacement of
iseq->xxx to iseq->body->xxx.
(previous) rb_iseq_t::compile_data is also located to
rb_iseq_t::compile_data.
It was moved from rb_iseq_body::compile_data.
Now rb_iseq_t has empty two pointers.
I will split rb_iseq_body data into static data and dynamic data.
* compile.c: rename some functions/macros.
Now, we don't need to separate iseq and iseqval (only VALUE).
* eval.c (ruby_exec_internal): `n' is rb_iseq_t (T_IMEMO/iseq).
* ext/objspace/objspace.c (count_imemo_objects): count T_IMEMO/iseq.
* gc.c: check T_IMEMO/iseq.
* internal.h: add imemo_type::imemo_iseq.
* iseq.c: define RubyVM::InstructionSequnce as T_OBJECT.
Methods are implemented by functions named iseqw_....
* load.c (rb_load_internal0): rb_iseq_new_top() returns
rb_iseq_t (T_IMEMO/iesq).
* method.h (rb_add_method_iseq): accept rb_iseq_t (T_IMEMO/iseq).
* vm_core.h (GetISeqPtr): removed because it is not T_DATA now.
* vm_core.h (struct rb_iseq_body): remove padding for
[Bug #10037][ruby-core:63721].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51327 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (RUBY_VM_CHECK_INTS): evaluate the argument only once
to get rid of inadvertent side effects.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51281 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread.c (RUBY_VM_CHECK_INTS_BLOCKING): move from vm_core.h for
the static function rb_threadptr_pending_interrupt_empty_p.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51280 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (EXEC_EVENT_HOOK_ORIG): evaluate each arguments only
once to get rid of inadvertent side effects. fix use of `th`
variable in the second `if` statement.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51279 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_iseq_t::local_iseq is not constant data because
local_iseq::flip_cnt can be modified (commentted).
* compile.c: catch up this fix.
* iseq.c: ditto.
* vm_insnhelper.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51269 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
via env->ep.
rb_vm_env_prev_envval(env) returns prev_envval via env->ep.
* vm_core.h (rb_vm_env_local_variables): change parameter type
from VALUE (T_DATA/env) to `const rb_env_t *' to make same as
rb_vm_env_prev_envval().
* proc.c: catch up these changes.
* vm_dump.c: ditto.
* vm.c: rename macros.
* ENV_IN_HEAP_P() to VM_EP_IN_HEAP_P() because it uses ep.
* ENV_VAL() to VM_ENV_EP_ENVVAL() because it is too short.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51245 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h: remove blockprocval field from rb_proc_t and rb_binding_t.
Instead of this field, mark given block in Proc at rb_env_t::env.
* vm.c (vm_make_env_each): make an Env object with this layout.
And also simplify parameters.
* proc.c: catch up this fix.
* vm_core.h: remove rb_env_t::local_size because it is not used.
* vm_dump.c (rb_vmdebug_env_dump_raw): catch up this fix.
* vm_core.h (rb_vm_make_env_object): remove rb_vm_make_env_object()
because it is only refered from vm.c.
* vm_eval.c (eval_string_with_cref): catch up this fix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51243 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_callable_method_entry_t has information about defined class.
* vm_insnhelper.c (vm_search_method): don't set ci->klass because
it is removed.
* vm_insnhelper.c (rb_equal_opt): ditto.
* vm_insnhelper.c (vm_search_superclass): removed because it is too
simple to write code directly.
* vm_insnhelper.c (vm_defined): don't use vm_search_superclass().
This fix avoid searching current callable `me' twice.
* vm_insnhelper.c (vm_search_super_method): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51200 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* internal.h, iseq.c (rb_iseq_klass): remove it because
rb_iseq_t::klass is removed.
* vm_insnhelper.c (vm_super_outside): do not see cfp->iseq, but
check callable method entry on a frame.
This fix simplify the logic to search super class.
* test/ruby/test_method.rb: support super() from Proc.
Now, [Bug #4881] and [Bug #3136] was solved.
* proc.c (rb_mod_define_method): catch up this change.
* vm.c (vm_define_method): ditto.
* vm_backtrace.c (rb_profile_frames): now, each `frame' objects
are rb_callable_method_entry_t data or iseq VALUEs.
This fix introduce minor compatibility issue that
rb_profile_frame_label() always returns
rb_profile_frame_base_label().
* test/-ext-/debug/test_profile_frames.rb: catch up this change.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51166 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_control_frame_t::klass.
[Bug #11278], [Bug #11279]
rb_method_entry_t data belong to modules/classes.
rb_method_entry_t::owner points defined module or class.
module M
def foo; end
end
In this case, owner is M.
rb_callable_method_entry_t data belong to only classes.
For modules, MRI creates corresponding T_ICLASS internally.
rb_callable_method_entry_t can also belong to T_ICLASS.
rb_callable_method_entry_t::defined_class points T_CLASS or
T_ICLASS.
rb_method_entry_t data for classes (not for modules) are also
rb_callable_method_entry_t data because it is completely same data.
In this case, rb_method_entry_t::owner == rb_method_entry_t::defined_class.
For example, there are classes C and D, and incldues M,
class C; include M; end
class D; include M; end
then, two T_ICLASS objects for C's super class and D's super class
will be created.
When C.new.foo is called, then M#foo is searcheed and
rb_callable_method_t data is used by VM to invoke M#foo.
rb_method_entry_t data is only one for M#foo.
However, rb_callable_method_entry_t data are two (and can be more).
It is proportional to the number of including (and prepending)
classes (the number of T_ICLASS which point to the module).
Now, created rb_callable_method_entry_t are collected when
the original module M was modified. We can think it is a cache.
We need to select what kind of method entry data is needed.
To operate definition, then you need to use rb_method_entry_t.
You can access them by the following functions.
* rb_method_entry(VALUE klass, ID id);
* rb_method_entry_with_refinements(VALUE klass, ID id);
* rb_method_entry_without_refinements(VALUE klass, ID id);
* rb_resolve_refined_method(VALUE refinements, const rb_method_entry_t *me);
To invoke methods, then you need to use rb_callable_method_entry_t
which you can get by the following APIs corresponding to the
above listed functions.
* rb_callable_method_entry(VALUE klass, ID id);
* rb_callable_method_entry_with_refinements(VALUE klass, ID id);
* rb_callable_method_entry_without_refinements(VALUE klass, ID id);
* rb_resolve_refined_method_callable(VALUE refinements, const rb_callable_method_entry_t *me);
VM pushes rb_callable_method_entry_t, so that rb_vm_frame_method_entry()
returns rb_callable_method_entry_t.
You can check a super class of current method by
rb_callable_method_entry_t::defined_class.
* method.h: renamed from rb_method_entry_t::klass to
rb_method_entry_t::owner.
* internal.h: add rb_classext_struct::callable_m_tbl to cache
rb_callable_method_entry_t data.
We need to consider abotu this field again because it is only
active for T_ICLASS.
* class.c (method_entry_i): ditto.
* class.c (rb_define_attr): rb_method_entry() does not takes
defiend_class_ptr.
* gc.c (mark_method_entry): mark RCLASS_CALLABLE_M_TBL() for T_ICLASS.
* cont.c (fiber_init): rb_control_frame_t::klass is removed.
* proc.c: fix `struct METHOD' data structure because
rb_callable_method_t has all information.
* vm_core.h: remove several fields.
* rb_control_frame_t::klass.
* rb_block_t::klass.
And catch up changes.
* eval.c: catch up changes.
* gc.c: ditto.
* insns.def: ditto.
* vm.c: ditto.
* vm_args.c: ditto.
* vm_backtrace.c: ditto.
* vm_dump.c: ditto.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
* vm_method.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51126 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (VM_ASSERT): make an expression, as well as standard
assert().
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50825 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* class.c (clone_method): use renamed name.
* vm_insnhelper.c (rb_vm_rewrite_cref): do not use `node' in variable
names.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50752 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h: use enum method_missing_reason for
rb_thread_t::method_missing_reason.
* vm_eval.c: catch up this fix.
* vm_insnhelper.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50747 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
`flag' contains several categories of attributes and it makes us
confusion (at least, I had confused).
* rb_method_visibility_t (flags::visi)
* NOEX_UNDEF -> METHOD_VISI_UNDEF = 0
* NOEX_PUBLIC -> METHOD_VISI_PUBLIC = 1
* NOEX_PRIVATE -> METHOD_VISI_PRIVATE = 2
* NOEX_PROTECTED -> METHOD_VISI_PROTECTED = 3
* NOEX_SAFE(flag)) -> safe (flags::safe, 2 bits)
* NOEX_BASIC -> basic (flags::basic, 1 bit)
* NOEX_MODFUNC -> rb_scope_visibility_t in CREF
* NOEX_SUPER -> MISSING_SUPER (enum missing_reason)
* NOEX_VCALL -> MISSING_VCALL (enum missing_reason)
* NOEX_RESPONDS -> BOUND_RESPONDS (macro)
Now, NOEX_NOREDEF is not supported (I'm not sure it is needed).
Background:
I did not know what "NOEX" stands for.
I asked Matz (who made this name) and his answer was "Nothing".
"At first, it meant NO EXport (private), but the original
meaning was gone."
This is why I remove the mysterious word "NOEX" from MRI.
* vm_core.h: introduce `enum missing_reason' to represent
method_missing (NoMethodError) reason.
* eval_intern.h: introduce rb_scope_visibility_t to represent
scope visibility.
It has 3 method visibilities (public/private/protected)
and `module_function`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50743 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Motivation and new data structure are described in [Bug #11203].
This patch also solve the following issues.
* [Bug #11200] Memory leak of method entries
* [Bug #11046] __callee__ returns incorrect method name in orphan
proc
* test/ruby/test_method.rb: add a test for [Bug #11046].
* vm_core.h: remvoe rb_control_frame_t::me. me is located at value
stack.
* vm_core.h, gc.c, vm_method.c: remove unlinked_method... codes
because method entries are simple VALUEs.
* method.h: Now, all method entries has own independent method
definititons. Strictly speaking, this change is not essential,
but for future changes.
* rb_method_entry_t::flag is move to rb_method_definition_t::flag.
* rb_method_definition_t::alias_count is now
rb_method_definition_t::alias_count_ptr, a pointer to the counter.
* vm_core.h, vm_insnhelper.c (rb_vm_frame_method_entry) added to
search the current method entry from value stack.
* vm_insnhelper.c (VM_CHECK_MODE): introduced to enable/disable
assertions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50728 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
during complex parameter setting process (splat, kw, and so on).
[Bug #11027]
* vm_core.h: remove rb_thead_t::mark_stack_len.
With this modification, we don't need to use th->mark_stack_len.
* test/ruby/test_keyword.rb: add a test.
* cont.c (cont_capture): catch up this fix.
* vm.c (rb_thread_mark): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50172 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
nobu
ko1
normal
naruse