* vm_core.h (rb_thread_t): rename rb_thread_t::state to tag_state
to make it clear.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59158 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Return value of EXEC_TAG() is saved by "int state".
Instead of "int", use "enum ruby_tag_type". First EXEC_TAG()
value should be 0, so that define TAG_NONE (= 0) and use it.
Some code used "status" instead of "state". To make them clear,
rename them to state.
We can change variable name from "state" to "tag_state", but this
ticket doesn't contain it.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59155 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (OPT_CALL_CFUNC_WITHOUT_FRAME): removed because nobody use it.
This optimization tries to call C-methods without pushing VM frames,
however no big improvements compare with this complexity.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59076 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (yield_under): do not inform Proc is lambda or not.
After that invoke_block_from_c_bh() checks it.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59017 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* internal.h (rb_yield_lambda): rename to rb_yield_force_blockarg()
because this function prohibt lambda arg setup (strict setup).
* vm.c (invoke_iseq_block_from_c): remove splattable argument because
it is not used.
* vm.c (invoke_block_from_c_splattable): rename to invoke_block_from_c_bh()
because `splattable` doesn't make sense on current this function.
Also accept `force_blockarg' parameter instead of `splattable` parameter.
It is more clear.
* vm.c (invoke_block_from_c_unsplattable): rename to
invoke_block_from_c_proc() and accept `proc` instead of `block'.
This function is used only by proc block invocation.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59016 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* proc.c (ruby_binding_data_type): set RUBY_TYPED_WB_PROTECTED.
Insert write barriers (WBs) to all of writes.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58988 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (check_funcall_missing): revert r58984. should call
method_missing if respond_to_missing is not redefined.
* vm_eval.c (rb_check_funcall_default): return the default value
if respond_to_missing and method_missing are not defined.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58985 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (check_funcall_missing): basic_obj_respond_to_missing
returns Qundef if respond_to_missing is not redefined.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58984 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h: rename absolute_path to realpath because it is expected name.
external APIs (#absolute_path methods) are remained.
* vm_core.h: remove rb_iseq_location_struct::path and
rb_iseq_location_struct::absolute_path and introduce pathobj.
if given path equals to given absolute_path (and most of case
it is true), pathobj is simply given path String. If it is not same,
pathobj is Array and pathobj[0] is path and pathobj[1] is realpath.
This size optimization reduce 8 bytes and
sizeof(struct rb_iseq_constant_body) is 200 bytes -> 192 bytes
on 64bit CPU.
To support this change, the following functions are introduced:
* pathobj_path() (defined in vm_core.h)
* pathobj_realpath() (ditto)
* rb_iseq_path() (decl. in vm_core.h)
* rb_iseq_realpath() (ditto)
* rb_iseq_pathobj_new() (ditto)
* rb_iseq_pathobj_set() (ditto)
* vm_core.h (rb_binding_t): use pathobj instead of path. If binding
is given at eval methods, realpath (absolute_path) was caller's
realpath. However, they should use binding's realpath.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58979 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The goal is to reduce rb_context_t and rb_fiber_t size
by removing the need to store the entire rb_thread_t in
there.
[ruby-core:81045] Work-in-progress: soon, we will move more fields here.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58614 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_backtrace.c (rb_threadptr_backtrace_object): rename and
extern.
* vm_backtrace.c (rb_threadptr_backtrace_str_ary): rename as
threadptr since the parameter is rb_thread_t*.
* vm_backtrace.c (rb_threadptr_backtrace_location_ary): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58377 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* gc.c (rb_threadptr_stack_check): check probability of stack
overflow for the given thread, not the current thread.
* vm_eval.c (stack_check): check the given thread, not the current
thread.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58375 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* include/ruby/ruby.h (rb_funcall): check if argc matches the
number of variadic arguments, and replace with rb_funcallv.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58362 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* include/ruby/ruby.h (rb_yield_values): check if argc matches the
number of variadic arguments, and replace with rb_yield_values2.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58350 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_yield_lambda): new function which yields an array
to a proc and splat to a lambda. mainly for Enumerable only.
* vm_args.c (setup_parameters_complex): remove special lambda
splatting for [Bug #9605]. [ruby-core:77065] [Bug #12705]
* vm_insnhelper.c (vm_callee_setup_block_arg): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58019 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (yield_under): should evaluate the proc on the first
argument. [ruby-core:78839] [Bug #13074]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57194 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Use volatile instead of optnone to avoid optimization which causes
segmentation faults.
Patch by Dimitry Andric. [ruby-core:78531] [Bug #13014]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57020 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (vm_call0_body): refined module should not be skipped
as prepended. [ruby-core:78073] [Bug #12920]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56694 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (vm_call0_body): follow the original class, not to
loop the prepended module. [ruby-core:77784] [Bug #12876]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56520 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and VM_FRAME_CFRAME_P().
Most of case, RUBY_VM_NORMAL_ISEQ_P() is no
longer needed.
* vm_core.h: introduce rb_obj_is_iseq().
* cont.c, vm.c: VM_FRAME_MAGIC_DUMMY with
VM_FRAME_FLAG_CFRAME.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55804 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* *.c: rename rb_funcall2 to rb_funcallv, except for extensions
which are/will be/may be gems. [Fix GH-1406]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55773 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
[Bug #12628]
This patch introduce many changes.
* Introduce concept of "Block Handler (BH)" to represent
passed blocks.
* move rb_control_frame_t::flag to ep[0] (as a special local
variable). This flags represents not only frame type, but also
env flags such as escaped.
* rename `rb_block_t` to `struct rb_block`.
* Make Proc, Binding and RubyVM::Env objects wb-protected.
Check [Bug #12628] for more details.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55766 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
instead of setting rb_thread_t::cfp directly.
* vm_insnhelper.c (vm_pop_frame): return the result of
finish frame or not.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55755 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_eval_cmd): refactor to share common code, and
suppress false maybe-uninitialized warnings by old gcc.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55436 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and define CONSTFUNC and PUREFUNC if available.
Note that I don't add those options as default because
it still shows many false-positive (it seems not to consider
longjmp).
* vm_eval.c (stack_check): get rb_thread_t* as an argument
to avoid duplicate call of GET_THREAD().
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54952 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_eval_cmd, rb_catch_obj): use TH_JUMP_TAG with the
same rb_thread_t used for TH_PUSH_TAG, instead of JUMP_TAG with
the current thread global variable.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54914 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (struct parser_params): move parse_in_eval flag from
rb_thread_t.
* parse.y (rb_parser_set_context): set parsing context, not only
mild error flag.
* iseq.c (rb_iseq_compile_with_option): the parser now refers no
thread local states to be restored.
* vm_eval.c (eval_string_with_cref): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54343 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_compile_with_option): make the parser in mild
error.
* load.c (rb_load_internal0): ditto.
* parse.y (yycompile0): return the error message within the error
to be raised. [Feature #11951]
* parse.y (parser_compile_error): accumulate error messages in the
error_buffer.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54189 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_f_catch): [DOC] fix malformed RDoc syntax, "+...+"
cannot enclose non-identifier characters.
a patch by Sebastian S in [ruby-core:74278]. [Bug#12170]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54089 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (method_missing): call by found method entry and get
rid of searching the same method entry twice.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53984 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_check_funcall_with_hook): also should call the
given hook before returning Qundef when overridden respond_to?
method returned false. [ruby-core:73556] [Bug #12030]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53695 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (make_no_method_exception): make format string
fstring.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53525 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_throw, rb_catch): get rid of making static IDs,
use dynamic symbos instead.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52793 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
CREFs should not be shared by methods between `using'.
[Bug #11247]
* vm_insnhelper.c (vm_cref_replace_with_duplicated_cref): ditto.
* vm.c (vm_cref_dup): should copy refinements correctly.
* eval.c: use rb_vm_cref_replace_with_duplicated_cref().
* eval_intern.h: add a decl. of
rb_vm_cref_replace_with_duplicated_cref().
* vm_eval.c (eval_string_with_cref): do not need to pass
scope's CREF because VM can find out CREF from stack frames.
* test/ruby/test_refinement.rb: add a test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52677 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (local_var_list_add): skip internal local variable
name by its type but not if it has a name. internal local
variable names are just unique per frame, not globally.
[ruby-core:71437] [Bug #11674]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52536 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_check_funcall_default): split from
rb_check_funcall to return the given fallback value.
* object.c (rb_obj_dig): use rb_check_funcall_default so that tail
call optimization will be possible. [Feature #11643]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52505 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (VM_PROFILE_UP): use enum.
* vm_insnhelper.c (vm_profile_show_result): fix typo, "r->c" at
the last should be "c->c".
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52343 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* error.c (name_err_mesg_to_str): separate class names from the
receiver description.
* vm_eval.c (make_no_method_exception, raise_method_missing): add
format specifiers for class names.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52247 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_f_loop): When a loop is stopped by a StopIteration
exception, return what the enumerator has returned instead of
nil. [ruby-core:71133] [Feature #11498]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52218 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
functions.
* vm_insnhelper.c (vm_yield_callee_setup_arg): remove this function
beacuse it is only delegation function.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52104 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
because $SAFE = 3 and 4 is not available.
Now, $SAFE is not checked on method dispatch at all.
* vm_eval.c, vm_insnhelper.c, vm_method.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52058 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* rb_call_info (ci) has compiled fixed information.
* if ci->flag & VM_CALL_KWARG, then rb_call_info is
also rb_call_info_with_kwarg. This technique reduce one word
for major rb_call_info data.
* rb_calling_info has temporary data (argc, blockptr, recv).
for each method dispatch. This data is allocated only on
machine stack.
* rb_call_cache is for inline method cache.
Before this patch, only rb_call_info_t data is passed.
After this patch, above three structs are passed.
This patch improves:
* data locarity (rb_call_info is now read-only data).
* reduce memory consumption (rb_call_info_with_kwarg,
rb_calling_info).
* compile.c: use above data.
* insns.def: ditto.
* iseq.c: ditto.
* vm_args.c: ditto.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
* vm_insnhelper.h: ditto.
* iseq.h: add iseq_compile_data::ci_index and
iseq_compile_data::ci_kw_indx.
* tool/instruction.rb: introduce TS_CALLCACHE operand type.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51903 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (raise_method_missing): "names" should be singular.
pointed out by Filip Bartuzi.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51746 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (raise_method_missing): refine error messages when a
symbol is not given. [Fix GH-1013]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51742 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (check_funcall_failed, check_funcall_missing): cache
results of respond_to? and respond_to_missing?, and search a
pulibc method only for compatibility with rb_respond_to.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51665 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (send_internal): set method_missing_reason before
invoking overriding method_missing method so that the default
method_missing can achieve it properly.
[ruby-core:68515] [Bug #10969]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51427 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
All contents of previous rb_iseq_t is in rb_iseq_t::body.
Remove rb_iseq_t::self because rb_iseq_t is an object.
RubyVM::InstructionSequence is wrapper object points T_IMEMO/iseq.
So RubyVM::ISeq.of(something) method returns different wrapper
objects but they point the same T_IMEMO/iseq object.
This patch is big, but most of difference is replacement of
iseq->xxx to iseq->body->xxx.
(previous) rb_iseq_t::compile_data is also located to
rb_iseq_t::compile_data.
It was moved from rb_iseq_body::compile_data.
Now rb_iseq_t has empty two pointers.
I will split rb_iseq_body data into static data and dynamic data.
* compile.c: rename some functions/macros.
Now, we don't need to separate iseq and iseqval (only VALUE).
* eval.c (ruby_exec_internal): `n' is rb_iseq_t (T_IMEMO/iseq).
* ext/objspace/objspace.c (count_imemo_objects): count T_IMEMO/iseq.
* gc.c: check T_IMEMO/iseq.
* internal.h: add imemo_type::imemo_iseq.
* iseq.c: define RubyVM::InstructionSequnce as T_OBJECT.
Methods are implemented by functions named iseqw_....
* load.c (rb_load_internal0): rb_iseq_new_top() returns
rb_iseq_t (T_IMEMO/iesq).
* method.h (rb_add_method_iseq): accept rb_iseq_t (T_IMEMO/iseq).
* vm_core.h (GetISeqPtr): removed because it is not T_DATA now.
* vm_core.h (struct rb_iseq_body): remove padding for
[Bug #10037][ruby-core:63721].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51327 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h: remove blockprocval field from rb_proc_t and rb_binding_t.
Instead of this field, mark given block in Proc at rb_env_t::env.
* vm.c (vm_make_env_each): make an Env object with this layout.
And also simplify parameters.
* proc.c: catch up this fix.
* vm_core.h: remove rb_env_t::local_size because it is not used.
* vm_dump.c (rb_vmdebug_env_dump_raw): catch up this fix.
* vm_core.h (rb_vm_make_env_object): remove rb_vm_make_env_object()
because it is only refered from vm.c.
* vm_eval.c (eval_string_with_cref): catch up this fix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51243 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_control_frame_t::klass.
[Bug #11278], [Bug #11279]
rb_method_entry_t data belong to modules/classes.
rb_method_entry_t::owner points defined module or class.
module M
def foo; end
end
In this case, owner is M.
rb_callable_method_entry_t data belong to only classes.
For modules, MRI creates corresponding T_ICLASS internally.
rb_callable_method_entry_t can also belong to T_ICLASS.
rb_callable_method_entry_t::defined_class points T_CLASS or
T_ICLASS.
rb_method_entry_t data for classes (not for modules) are also
rb_callable_method_entry_t data because it is completely same data.
In this case, rb_method_entry_t::owner == rb_method_entry_t::defined_class.
For example, there are classes C and D, and incldues M,
class C; include M; end
class D; include M; end
then, two T_ICLASS objects for C's super class and D's super class
will be created.
When C.new.foo is called, then M#foo is searcheed and
rb_callable_method_t data is used by VM to invoke M#foo.
rb_method_entry_t data is only one for M#foo.
However, rb_callable_method_entry_t data are two (and can be more).
It is proportional to the number of including (and prepending)
classes (the number of T_ICLASS which point to the module).
Now, created rb_callable_method_entry_t are collected when
the original module M was modified. We can think it is a cache.
We need to select what kind of method entry data is needed.
To operate definition, then you need to use rb_method_entry_t.
You can access them by the following functions.
* rb_method_entry(VALUE klass, ID id);
* rb_method_entry_with_refinements(VALUE klass, ID id);
* rb_method_entry_without_refinements(VALUE klass, ID id);
* rb_resolve_refined_method(VALUE refinements, const rb_method_entry_t *me);
To invoke methods, then you need to use rb_callable_method_entry_t
which you can get by the following APIs corresponding to the
above listed functions.
* rb_callable_method_entry(VALUE klass, ID id);
* rb_callable_method_entry_with_refinements(VALUE klass, ID id);
* rb_callable_method_entry_without_refinements(VALUE klass, ID id);
* rb_resolve_refined_method_callable(VALUE refinements, const rb_callable_method_entry_t *me);
VM pushes rb_callable_method_entry_t, so that rb_vm_frame_method_entry()
returns rb_callable_method_entry_t.
You can check a super class of current method by
rb_callable_method_entry_t::defined_class.
* method.h: renamed from rb_method_entry_t::klass to
rb_method_entry_t::owner.
* internal.h: add rb_classext_struct::callable_m_tbl to cache
rb_callable_method_entry_t data.
We need to consider abotu this field again because it is only
active for T_ICLASS.
* class.c (method_entry_i): ditto.
* class.c (rb_define_attr): rb_method_entry() does not takes
defiend_class_ptr.
* gc.c (mark_method_entry): mark RCLASS_CALLABLE_M_TBL() for T_ICLASS.
* cont.c (fiber_init): rb_control_frame_t::klass is removed.
* proc.c: fix `struct METHOD' data structure because
rb_callable_method_t has all information.
* vm_core.h: remove several fields.
* rb_control_frame_t::klass.
* rb_block_t::klass.
And catch up changes.
* eval.c: catch up changes.
* gc.c: ditto.
* insns.def: ditto.
* vm.c: ditto.
* vm_args.c: ditto.
* vm_backtrace.c: ditto.
* vm_dump.c: ditto.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
* vm_method.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51126 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_method_entry_t.
r50728 changed sharing `def's to isolating `def's
on alias and so on. However, this change conflicts
future improvement plan. So I change back to sharing approach.
* method.h: move rb_method_definition_t::flags to
rb_method_entry_t::attr::flags.
rb_method_entry_t::attr is union with VALUE because this field
should have same size of VALUE. rb_method_entry_t is T_IMEMO).
And also add the following access macros to it's fileds.
* METHOD_ENTRY_VISI(me)
* METHOD_ENTRY_BASIC(me)
* METHOD_ENTRY_SAFE(me)
* vm_method.c (rb_method_definition_addref): added instead of
rb_method_definition_clone().
Do not create new definition, but increment alias_count.
* class.c (clone_method): catch up this fix.
* class.c (method_entry_i): ditto.
* proc.c (mnew_internal): ditto.
* proc.c (mnew_missing): ditto.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
* vm_method.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50792 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h: use enum method_missing_reason for
rb_thread_t::method_missing_reason.
* vm_eval.c: catch up this fix.
* vm_insnhelper.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50747 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
`flag' contains several categories of attributes and it makes us
confusion (at least, I had confused).
* rb_method_visibility_t (flags::visi)
* NOEX_UNDEF -> METHOD_VISI_UNDEF = 0
* NOEX_PUBLIC -> METHOD_VISI_PUBLIC = 1
* NOEX_PRIVATE -> METHOD_VISI_PRIVATE = 2
* NOEX_PROTECTED -> METHOD_VISI_PROTECTED = 3
* NOEX_SAFE(flag)) -> safe (flags::safe, 2 bits)
* NOEX_BASIC -> basic (flags::basic, 1 bit)
* NOEX_MODFUNC -> rb_scope_visibility_t in CREF
* NOEX_SUPER -> MISSING_SUPER (enum missing_reason)
* NOEX_VCALL -> MISSING_VCALL (enum missing_reason)
* NOEX_RESPONDS -> BOUND_RESPONDS (macro)
Now, NOEX_NOREDEF is not supported (I'm not sure it is needed).
Background:
I did not know what "NOEX" stands for.
I asked Matz (who made this name) and his answer was "Nothing".
"At first, it meant NO EXport (private), but the original
meaning was gone."
This is why I remove the mysterious word "NOEX" from MRI.
* vm_core.h: introduce `enum missing_reason' to represent
method_missing (NoMethodError) reason.
* eval_intern.h: introduce rb_scope_visibility_t to represent
scope visibility.
It has 3 method visibilities (public/private/protected)
and `module_function`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50743 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Motivation and new data structure are described in [Bug #11203].
This patch also solve the following issues.
* [Bug #11200] Memory leak of method entries
* [Bug #11046] __callee__ returns incorrect method name in orphan
proc
* test/ruby/test_method.rb: add a test for [Bug #11046].
* vm_core.h: remvoe rb_control_frame_t::me. me is located at value
stack.
* vm_core.h, gc.c, vm_method.c: remove unlinked_method... codes
because method entries are simple VALUEs.
* method.h: Now, all method entries has own independent method
definititons. Strictly speaking, this change is not essential,
but for future changes.
* rb_method_entry_t::flag is move to rb_method_definition_t::flag.
* rb_method_definition_t::alias_count is now
rb_method_definition_t::alias_count_ptr, a pointer to the counter.
* vm_core.h, vm_insnhelper.c (rb_vm_frame_method_entry) added to
search the current method entry from value stack.
* vm_insnhelper.c (VM_CHECK_MODE): introduced to enable/disable
assertions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50728 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_obj_instance_eval, rb_obj_instance_exec): allow
symbols to just instance_eval/exec, execept for definition of
singletons. [ruby-core:68961] [Bug #11086]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50372 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_iterate0): simplify TAG_BREAK and TAG_RETRY by
sharing common code.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50106 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* internal.h (IFUNC_NEW): add argument for ID.
* vm_eval.c (rb_iterate): create ifunnc only when it is used.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50102 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Add THROW_DATA_NEW().
* internal.h: move defnition of `struct THROW_DATA'
from vm_insnhelper.h to internal.h.
Rename `THROW_DATA' to `vm_throw_data'.
* eval_intern.h (THROW_DATA_P): move to internal.h.
THROW_DATA is no longer T_NODE, so check T_IMEMO.
* gc.c (gc_mark_children): mark THROW_DATA.
* vm.c: catch up these changes.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49936 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
T_IMEMO is Internal Memo type, internal use only.
T_IMEMO has same purpose of NODE_MEMO.
To insert T_IMEMO, type numbers are modified a little.
* internal.h: define struct RIMemo. Each RIMemo objects
has imemo_type. We can observe it by the imemo_type() function.
* gc.c (rb_imemo_new): added.
* node.h: remove NODE_CREF and NEW_CREF().
* node.c (rb_gc_mark_node): ditto.
* vm.c (vm_cref_new): use rb_imem_new().
* vm_eval.c: ditto.
* vm_eval.c (eval_string_with_cref):
* vm_eval.c (rb_type_str):
* vm_insnhelper.c: use RIMemo objects for CREF.
* ext/objspace/objspace.c: support T_IMEMO.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49932 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
throwing data. Also define accessor functions.
* eval_intern.h: move related changes into vm_insnhelper.h.
Now these MACROs (functions) are only used in vm*.c.
There is only THROW_DATA_P(err) to check this data type or not.
* vm.c: catch up these changes.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49921 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_cref_t is data type of CREF. Now, the body is still NODE.
It is easy to understand what is CREF and what is pure NODE.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49897 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* CREF_CLASS(cref)
* CREF_NEXT(cref)
* CREF_VISI(cref)
* CREF_VISI_SET(cref, v)
* CREF_REFINEMENTS(cref)
* CREF_PUSHED_BY_EVAL(cref)
* CREF_PUSHED_BY_EVAL_SET(cref)
* CREF_OMOD_SHARED(cref)
* CREF_OMOD_SHARED_SET(cref)
* CREF_OMOD_SHARED_UNSET(cref)
This is process to change CREF data type from NODE.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49894 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h, method.h: remove rb_iseq_t::cref_stack. CREF is stored
to rb_method_definition_t::body.iseq_body.cref.
* vm_insnhelper.c: modify SVAR usage.
When calling ISEQ type method, push CREF information onto method
frame, SVAR located place. Before this fix, SVAR is simply nil.
After this patch, CREF (or NULL == Qfalse for not iseq methods)
is stored at the method invocation.
When SVAR is requierd, then put NODE_IF onto SVAR location,
and NDOE_IF::nd_reserved points CREF itself.
* vm.c (vm_cref_new, vm_cref_dump, vm_cref_new_toplevel): added.
* vm_insnhelper.c (vm_push_frame): accept CREF.
* method.h, vm_method.c (rb_add_method_iseq): added. This function
accepts iseq and CREF.
* class.c (clone_method): use rb_add_method_iseq().
* gc.c (mark_method_entry): mark method_entry::body.iseq_body.cref.
* iseq.c: remove CREF related codes.
* insns.def (getinlinecache/setinlinecache): CREF should be cache key
because a different CREF has a different namespace.
* node.c (rb_gc_mark_node): mark NODE_IF::nd_reserved for SVAR.
* proc.c: catch up changes.
* struct.c: ditto.
* insns.def: ditto.
* vm_args.c (raise_argument_error): ditto.
* vm_eval.c: ditto.
* test/ruby/test_class.rb: add a test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49874 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (vm_call_super): search next super class from the
original class, to get rid of infinite recursion with
prepending. a patch by Seiei Higa <hanachin AT gmail.com> at
[ruby-core:68434]. [ruby-core:68093] [Bug #10847]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49867 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
refinements activation information and the refinements should be
activated in subsequent eval calls with the binding.
[ruby-core:67945] [Bug #10818]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49851 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (check_funcall_missing): no longer turn an ID into a
symbol temporarily to get rid of use of SYM2ID.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49518 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (send_internal), vm_insnhelper.c (vm_call_opt_send):
convert String method name into a Symbol, as method_missing
method expects its first argument to be a Symbol. [Bug #10828]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49506 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
change throw mechanism (not save target ep, but save target cfp).
It fixes `unexpected break' bug that occurs when
TracePoint#binding is called.
[ruby-dev:48797] [Bug #10689]
* test/ruby/test_settracefunc.rb: add a test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49266 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_eval_string_wrap): [DOC] Fix `rb_eval_string_wrap`
documentation. It is referencing `require` instead of `load`.
The former does not have the optional argument. [Fix GH-779]
[ci skip]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48745 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_method_call_status): preserve encoding of called method
name in error messages.
* vm_insnhelper.c (vm_call_method): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48572 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_current_receiver): new function to return the
receiver in the current control frame. [Feature #10195]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48462 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* defs/id.def: add :mesg and :exception and move from other
sources.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48457 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
No need to use rb_intern, here. Reduces size slightly on x86-64:
$ ~/linux/scripts/bloat-o-meter ruby.before ruby.after
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-31 (-31)
function old new delta
rb_eval_cmd 813 782 -31
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48418 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Nobody uses this function in our source tree, but maybe this
bug is triggered by certain C extensions.
[Bug #10509]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48417 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (vm_call_super): allow bound proc method to call super
method.
* vm_insnhelper.c (vm_yield_with_cfunc): push defined class and
bound proc method entry to the control frame.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48348 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
keyword arguments/parameters and a splat argument.
[Feature #10440] (Details are described in this ticket)
Most of complex part is moved to vm_args.c.
Now, ISeq#to_a does not catch up new instruction format.
* vm_core.h: change iseq data structures.
* introduce rb_call_info_kw_arg_t to represent keyword arguments.
* add rb_call_info_t::kw_arg.
* rename rb_iseq_t::arg_post_len to rb_iseq_t::arg_post_num.
* rename rb_iseq_t::arg_keywords to arg_keyword_num.
* rename rb_iseq_t::arg_keyword to rb_iseq_t::arg_keyword_bits.
to represent keyword bitmap parameter index.
This bitmap parameter shows that which keyword parameters are given
or not given (0 for given).
It is refered by `checkkeyword' instruction described bellow.
* rename rb_iseq_t::arg_keyword_check to rb_iseq_t::arg_keyword_rest
to represent keyword rest parameter index.
* add rb_iseq_t::arg_keyword_default_values to represent default
keyword values.
* rename VM_CALL_ARGS_SKIP_SETUP to VM_CALL_ARGS_SIMPLE
to represent
(ci->flag & (SPLAT|BLOCKARG)) &&
ci->blockiseq == NULL &&
ci->kw_arg == NULL.
* vm_insnhelper.c, vm_args.c: rewrite with refactoring.
* rewrite splat argument code.
* rewrite keyword arguments/parameters code.
* merge method and block parameter fitting code into one code base.
* vm.c, vm_eval.c: catch up these changes.
* compile.c (new_callinfo): callinfo requires kw_arg parameter.
* compile.c (compile_array_): check the last argument Hash object or
not. If Hash object and all keys are Symbol literals, they are
compiled to keyword arguments.
* insns.def (checkkeyword): add new instruction.
This instruction check the availability of corresponding keyword.
For example, a method "def foo k1: 'v1'; end" is cimpiled to the
following instructions.
0000 checkkeyword 2, 0 # check k1 is given.
0003 branchif 9 # if given, jump to address #9
0005 putstring "v1"
0007 setlocal_OP__WC__0 3 # k1 = 'v1'
0009 trace 8
0011 putnil
0012 trace 16
0014 leave
* insns.def (opt_send_simple): removed and add new instruction
"opt_send_without_block".
* parse.y (new_args_tail_gen): reorder variables.
Before this patch, a method "def foo(k1: 1, kr1:, k2: 2, **krest, &b)"
has parameter variables "k1, kr1, k2, &b, internal_id, krest",
but this patch reorders to "kr1, k1, k2, internal_id, krest, &b".
(locate a block variable at last)
* parse.y (vtable_pop): added.
This function remove latest `n' variables from vtable.
* iseq.c: catch up iseq data changes.
* proc.c: ditto.
* class.c (keyword_error): export as rb_keyword_error().
* common.mk: depend vm_args.c for vm.o.
* hash.c (rb_hash_has_key): export.
* internal.h: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48239 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (eval_string_with_cref): fix super from eval with
scope. set klass in the current control frame to the class of
the receiver in the context to be evaluated, this class/module
must match the actual receiver to call super.
[ruby-core:65122] [Bug #10263]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47645 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm.c (rb_vm_env_local_variables): returns array of local
variable name symbols in the environment by envval.
* proc.c (bind_local_variables): use rb_vm_env_local_variables.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46648 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
block or String arguments. By @nathanl via documenting-ruby/ruby#28
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46085 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (local_var_list_add): use symbol identity, and get rid
of method calls.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45855 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
given. Related to [ruby-core:56099] [Bug #8662] and r42103.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45360 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Pointed out by ko1.
* vm_eval.c (vm_call0_body): use RARRAY_CONST_PTR
(check_funcall_exec): ditto
[ruby-core:61360]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45283 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_search_method_entry): also Qfalse and Qnil are
immediate values, so have no RBASIC. omit klass, which is 0.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44760 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_search_method_entry): preserve encoding of method
ID in error messages.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44759 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The patch base by drkaes (Stefan Kaes).
[Bug #9321]
* variable.c (rb_mod_const_missing): use rb_vm_pop_cfunc_frame()
instead of rb_frame_pop().
* vm_eval.c (raise_method_missing): ditto.
* vm_eval.c (rb_iterate): ditto.
* internal.h (rb_vm_pop_cfunc_frame): add decl.
* test/ruby/test_settracefunc.rb: add tests.
provided by drkaes (Stefan Kaes).
* vm.c, eval.c, include/ruby/intern.h (rb_frame_pop):
move definition of rb_frame_pop() and deprecate it.
It doesn't care about `return' events.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44535 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_catch_protect): new function similar to
rb_catch_obj(), but protect from all global jumps like as
rb_load_protect(), rb_protect(), etc.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43979 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
ko1
nobu
normal
shugo
ktsj
naruse
knu
svn
kazu
marcandre
zzak
sorah
glass
tmm1