* vm_dump.c (rb_vmdebug_debug_print_pre): suppress warning on a
platform ptrdiff_t is shorter than long int.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43931 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
PC is cached into local stack and cfp->pc is incorrent at next of
branch or jump.
* vm_exec.h (DEBUG_ENTER_INSN): catch up this change.
* vm_core.h: update signature of rb_vmdebug_debug_print_pre.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43916 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
beyond signal trampoline, and as described in r38342 it can't
trace on -O because it see stack frame pointers.
libunwind unw_backtrace see dwarf information in the binary
and it works with -O (without frame pointers).
* configure.in: remove r38342's hack and check libunwind.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@39302 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_dump.c (rb_vm_bugreport): show the most important message, Crash
Report log information, first.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@38990 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
in order to avoid segv. anyone can fix addr2line?
[Bug #7597] [ruby-dev:46786]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@38533 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
At least on FreeBSD ruby will crash on getting C backtrace
when it is compiled with other than -O0.
* vm_dump.c: enable backtrace on FreeBSD even if with optimizations.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@38342 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_dump.c (rb_vm_bugreport): get rid of calling methods in sigsegv
handler. based on a patch by charliesome (Charlie Somerville)
[ruby-core:49573] [Bug #7402]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@38329 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_dump.c (rb_vm_bugreport): get rid of calling methods in sigsegv
handler. based on a patch by charliesome (Charlie Somerville)
[ruby-core:49573] [Bug #7402]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@38041 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
on it.
* common.mk (vm_dump.$(OBJEXT)): remove dependency on probes.h
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37733 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* array.c (empty_ary_alloc, ary_new): added array create DTrace probe.
* compile.c (rb_insns_name): allowing DTrace probes to access
instruction sequence name.
* Makefile.in: translate probes.d file to appropriate header file.
* common.mk: declare dependencies on the DTrace header.
* configure.in: add a test for existence of DTrace.
* eval.c (setup_exception): add a probe for when an exception is
raised.
* gc.c: Add DTrace probes for mark begin and end, and sweep begin and
end.
* hash.c (empty_hash_alloc): Add a probe for hash allocation.
* insns.def: Add probes for function entry and return.
* internal.h: function declaration for compile.c change.
* load.c (rb_f_load): add probes for `load` entry and exit, require
entry and exit, and wrapping search_required for load path search.
* object.c (rb_obj_alloc): added a probe for general object creation.
* parse.y (yycompile0): added a probe around parse and compile phase.
* string.c (empty_str_alloc, str_new): DTrace probes for string
allocation.
* test/dtrace/*: tests for DTrace probes.
* vm.c (vm_invoke_proc): add probes for function return on exception
raise, hash create, and instruction sequence execution.
* vm_core.h: add probe declarations for function entry and exit.
* vm_dump.c: add probes header file.
* vm_eval.c (vm_call0_cfunc, vm_call0_cfunc_with_frame): add probe on
function entry and return.
* vm_exec.c: expose instruction number to instruction name function.
* vm_insnshelper.c: add function entry and exit probes for cfunc
methods.
* vm_insnhelper.h: vm usage information is always collected, so
uncomment the functions.
12 19:14:50 2012 Akinori MUSHA <knu@iDaemons.org>
* configure.in (isinf, isnan): isinf() and isnan() are macros on
DragonFly which cannot be found by AC_REPLACE_FUNCS(). This
workaround enforces the fact that they exist on DragonFly.
12 15:59:38 2012 Shugo Maeda <shugo@ruby-lang.org>
* vm_core.h (rb_call_info_t::refinements), compile.c (new_callinfo),
vm_insnhelper.c (vm_search_method): revert r37616 because it's too
slow. [ruby-dev:46477]
* test/ruby/test_refinement.rb (test_inline_method_cache): skip
the test until the bug is fixed efficiently.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37631 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
hooks (old macro name is COLLECT_USAGE_ANALYSIS).
This feature is only for VM developers. (I'm not sure I can use
`VM developers' (the plural form) in this sentence).
If VM_COLLECT_USAGE_DETAILS is not 0, VM enables the following
usage collection features:
(1) insntruction: collect intruction usages.
(2) operand: collect operand usages.
(3) register: collect register usages.
The results are stored in
RubyVM::USAGE_ANALYSIS_INSN for (1, 2),
RubyVM::USAGE_ANALYSIS_INSN_BIGRAM for (1) and
RubyVM::USAGE_ANALYSIS_REGS for (3).
You can stop collecting usages with
RubyVM::USAGE_ANALYSIS_INSN_STOP(),
RubyVM::USAGE_ANALYSIS_OPERAND_STOP(),
RubyVM::USAGE_ANALYSIS_REGISTER_STOP()
for (1), (2), (3) respectively.
You can also change the hook functions by setting
C level global variables
`ruby_vm_collect_usage_func_(insn|operand|register)'
for (1), (2), (3) respectively.
See codes for more details.
* tool/instruction.rb: fix macro names.
* iseq.c (insn_operand_intern): make it export (used in vm.c).
fix to skip several processes if not needed (pointer is 0).
* vm_dump.c: move codes for collection features to vm.c.
* vm_exec.h: rename macro and function names.
* vm_insnhelper.h: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37085 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
`bp' can be calculate by `sp' (stack pointer) of previous frame.
Now, `bp_check' field is remained for debug. You can eliminate
this field by setting VM_DEBUG_BP_CHECK as 0.
* vm_insnhelper.c (vm_base_ptr): add `vm_base_ptr(cfp).
This function calculates base pointer from cfp.
* vm_insnhelper.c (vm_setup_method): push `recv' value on top of
value stack (before method parameters).
This change is for keeping consistency with normal method dispatch.
* insns.def: fix to use vm_base_ptr().
* vm.c (vm_exec): ditto.
* vm_dump.c: remove `bp' related dumps.
* cont.c (fiber_init): fix to check VM_DEBUG_BP_CHECK.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37043 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Before this commit:
`finish frame' was place holder which indicates that VM loop
needs to return function.
If a C method calls a Ruby methods (a method written by Ruby),
then VM loop will be (re-)invoked. When the Ruby method returns,
then also VM loop should be escaped. `finish frame' has only
one instruction `finish', which returns VM loop function.
VM loop function executes `finish' instruction, then VM loop
function returns itself.
With such mechanism, `leave' instruction (which returns one
frame from current scope) doesn't need to check that this `leave'
should also return from VM loop function.
Strictly, one branch can be removed from `leave' instructon.
Consideration:
However, pushing the `finish frame' needs costs because
it needs several memory accesses. The number of pushing
`finish frame' is greater than I had assumed. Of course,
pushing `finish frame' consumes additional control frame.
Moreover, recent processors has good branch prediction,
with which we can ignore such trivial checking.
After this commit:
Finally, I decide to remove `finish frame' and `finish'
instruction. Some parts of VM depend on `finish frame',
so the new frame flag VM_FRAME_FLAG_FINISH is introduced.
If this frame should escape from VM function loop, then
the result of VM_FRAME_TYPE_FINISH_P(cfp) is true.
`leave' instruction checks this flag every time.
I measured performance on it. However on my environments,
it improves some benchmarks and slows some benchmarks down.
Maybe it is because of C compiler optimization parameters.
I'll re-visit here if this cause problems.
* insns.def (leave, finish): remove finish instruction.
* vm.c, vm_eval.c, vm_exec.c, vm_backtrace.c, vm_dump.c:
apply above changes.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36099 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
dfp (dynamic frame pointer) to ep (environment pointer).
This change make VM `normal' (similar to other interpreters).
Before this commit:
Each frame has two env pointers lfp and dfp. lfp points
local environment which is method/class/toplevel frame.
lfp[0] is block pointer.
dfp is block local frame. dfp[0] points previous (parent)
environment pointer.
lfp == dfp when frame is method/class/toplevel.
You can get lfp from dfp by traversing previous environment
pointers.
After this commit:
Each frame has only `ep' to point respective enviornoment.
If there is parent environment, then ep[0] points parent
envioenment (as dfp). If there are no more environment,
then ep[0] points block pointer (as lfp). We call such ep
as `LEP' (local EP). We add some macros to get LEP and to
detect LEP or not.
In short, we replace dfp and lfp with ep and LEP.
rb_block_t and rb_binding_t member `lfp' and `dfp' are removed
and member `ep' is added.
rename rb_thread_t's member `local_lfp' and `local_svar' to
`root_lep' and `root_svar'.
(VM_EP_PREV_EP(ep)): get previous environment pointer. This macro
assume that ep is not LEP.
(VM_EP_BLOCK_PTR(ep)): get block pointer. This macro assume
that ep is LEP.
(VM_EP_LEP_P(ep)): detect ep is LEP or not.
(VM_ENVVAL_BLOCK_PTR(ptr)): make block pointer.
(VM_ENVVAL_BLOCK_PTR_P(v)): detect v is block pointer.
(VM_ENVVAL_PREV_EP_PTR(ptr)): make prev environment pointer.
(VM_ENVVAL_PREV_EP_PTR_P(v)): detect v is prev env pointer.
* vm.c: apply above changes.
(VM_EP_LEP(ep)): get LEP.
(VM_CF_LEP(cfp)): get LEP of cfp->ep.
(VM_CF_PREV_EP(cfp)): utility function VM_EP_PREV_EP(cfp->ep).
(VM_CF_BLOCK_PTR(cfp)): utility function VM_EP_BLOCK_PTR(cfp->ep).
* vm.c, vm_eval.c, vm_insnhelper.c, vm_insnhelper.h, insns.def:
apply above changes.
* cont.c: ditto.
* eval.c, eval_intern.h: ditto.
* proc.c: ditto.
* thread.c: ditto.
* vm_dump.c: ditto.
* vm_exec.h: fix function name (on vm debug mode).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36030 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
(1) rename rb_location_t to rb_iseq_location_t.
(2) rename field names of rb_iseq_location_t to adjust
RubyVM::Backtrace::Location methods.
(2-1) filename -> path
(2-2) filepath -> absolute_path
(2-3) basename -> base_label
(2-4) name -> label
(3) rename filed name rb_iseq_location_t#line_no to
rb_iseq_location_t#first_lineno to clear purpose of this field.
(4) The field names rb_binding_t#(filename|line_no) are also renamed
to rb_binding_t#(path|first_lineno).
* compile.c: apply above changes.
* iseq.c: ditto.
* proc.c: ditto.
* vm*.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@35899 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
is no longer included from vm.c). I hope this separation reduce
compile time of vm.c.
* internal.h: ditto.
* vm.c, vm_core.h, vm_dump.c, vm_eval.c: ditto.
* vm_eval.c: some functions (callee, etc) moved to vm_backtrace.c.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@35871 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
(1) unify similar functions (rb_backtrace_each() and
backtrace_object()). backtrace_each() is a unified function.
variation:
a) backtrace_object(): create backtrace object.
b) vm_backtrace_str_ary(): create bt as an array of string.
c) vm_backtrace_print(): print backtrace to specified file.
d) rb_backtrace_print_as_bugreport(): print backtrace on
bugreport style.
(2) remove rb_backtrace_each(). Use backtrace_each() instead.
(3) chang the type of lev parameter to size_t.
a) lev == 0 means current frame (exception, etc use it).
b) lev == 1 means upper frame (caller(0) use it).
* vm_core.h, vm_dump.c, vm_eval.c: ditto.
* vm.c (backtrace_object(), vm_backtrace_str_ary()): fix to return a
correct size of caller(lev) array.
Let n be a "caller(0).size" then ln as caller(lev).size should be
(n - lev). However, the previous implementation returns a wrong
size array (ln > n - lev). [ruby-dev:45673]
* test/ruby/test_backtrace.rb: add tests for backtrace.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@35787 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
information.
rb_location_t#filename, filepath, name and line_no was moved from
rb_iseq_t. rb_location_t#basename is a new field which is
similar to `name' field without any decoration.
`name' field contains some decoration such as `block in foo'.
`basename' only contains `foo'.
rb_iseq_t contains memory object of rb_location_t.
* iseq.c: setup rb_location_t for each rb_iseq_t memory objects.
* compile.c, proc.c, vm.c, vm_dump.c, vm_eval.c, vm_insnhelper.c,
vm_method.c: support about it.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@35756 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_dump.c (rb_vm_bugreport): show "Other runtime information"
header only when available.
* vm_dump.c (rb_vm_bugreport): get rid of modifying the content of
VM directly.
* vm_dump.c (rb_vm_bugreport): check if vm is non-null.
Pointed out by Ikegami Daisuke <ikegami.da@gmail.com>.
Thank you.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@33705 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
on Mac. It should be placed after "-- C level backtrace" line.
Suggested by Endoh-san.
<before>
-- See Crash Report log file under ~/Library/Logs/CrashReporter or ---------
-- /Library/Logs/CrashReporter, for the more detail of ---------------------
-- C level backtrace information -------------------------------------------
<after>
-- C level backtrace information -------------------------------------------
See Crash Report log file under ~/Library/Logs/CrashReporter or
/Library/Logs/CrashReporter, for the more detail of.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32231 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
words backtrace() is libexecinfo) and it is optimized.
This temporary hack should be also applied to other libexecinfo
environments.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@29982 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
tmm1
nobu
tarui
ko1
naruse
kosaki
ngoto
tenderlove
sorah
mrkn
akr