of `system` with `exception: true` like `Process::Status#inspect`
[Feature #14386] [ruby-core:85013]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62158 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Needlessly exporting can reduce performance locally and increase
binary size.
Increasing the footprint of our C-API larger is also detrimental
to our development as it encourages tighter coupling with our
internals; making it harder for us to preserve compatibility.
If some parts of the core codebase needs access to globals,
internal.h should be used instead of anything in include/ruby/*.
"Urabe, Shyouhei" <shyouhei@ruby-lang.org> wrote:
> On Thu, Jan 18, 2018 at 7:33 PM, Eric Wong <normalperson@yhbt.net> wrote:
> > shyouhei@ruby-lang.org wrote:
> >> https://svn.ruby-lang.org/cgi-bin/viewvc.cgi?view=revision&revision=61908
> >>
> >> export rb_mFConst
> >
> > Why are we exporting all these and making the public C-API bigger?
> > If anything, we should make these static. Thanks.
>
> No concrete reason, except they have already been externed in 2.5.
> These variables had lacked declarations so far, which resulted in their
> visibility to be that of extern. The commit is just confirming the status quo.
>
> I'm not against to turn them into static.
This reverts changes from r61910, r61909, r61908, r61907, and r61906.
* transcode.c (rb_eUndefinedConversionError): make static
(rb_eInvalidByteSequenceError): ditto
(rb_eConverterNotFoundError): ditto
* process.c (rb_mProcGID, rb_mProcUid, rb_mProcID_Syscall): ditto
* file.c (rb_mFConst): ditto
* error.c (rb_mWarning, rb_cWarningBuffer): ditto
* enumerator.c (rb_cLazy): ditto
[Misc #14381]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62029 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
POSIX only defines mode_t to be "an integer typea", and in fact
MacOS defines it to be uint16_t. We didn't have NUM2USHORT before
so it did not make sense but now that we have it. Why not check
apptopriately.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61950 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (get_clk_tck): prefer CLK_TCK over older HZ, next to
_SC_CLK_TCK.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61888 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (proc_s_last_status): add Process.last_status
[ruby-core:83514] [Feature #14043]
* test/ruby/test_process.rb (test_last_status): add a test case for
Process.last_status.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61143 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval_error.c (rb_threadptr_error_print): renamed to
rb_ec_error_print() and it accepts `ec`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60545 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to represent execution context [Feature #14038]
* vm_core.h (rb_thread_t): rb_thread_t::ec is now a pointer.
There are many code using `th` to represent execution context
(such as cfp, VM stack and so on). To access `ec`, they need to
use `th->ec->...` (adding one indirection) so that we need to
replace them by passing `ec` instead of `th`.
* vm_core.h (GET_EC()): introduced to access current ec. Also
remove `ruby_current_thread` global variable.
* cont.c (rb_context_t): introduce rb_context_t::thread_ptr instead of
rb_context_t::thread_value.
* cont.c (ec_set_vm_stack): added to update vm_stack explicitly.
* cont.c (ec_switch): added to switch ec explicitly.
* cont.c (rb_fiber_close): added to terminate fibers explicitly.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60440 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* array.c (rb_to_array_type): make public to share common code
internally.
* hash.c (rb_to_hash_type): make public to share common code
internally.
* symbol.c (rb_to_symbol_type): make public to share common code
internally.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60438 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Because NaCl and PNaCl are already sunset status.
see https://bugs.chromium.org/p/chromium/issues/detail?id=239656#c160
configure.ac: Patch for this file was provided by @nobu.
[Feature #14041][ruby-core:83497][fix GH-1726]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60374 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
As with forking for execve(2) in `spawn', we must block signals
to ensure they are handled correctly in a freshly `fork'-ed child.
* process.c (retry_fork_ruby): block/unblock signals around fork
(rb_fork_ruby): re-enable signals in forked child
* test/ruby/test_process.rb (test_forked_child_signal): new test
[ruby-core:82883] [Bug #13916]
Thanks to Russell Davis for the bug report and test case.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59975 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (rb_execarg_addopt_rlimit): hoist out of rb_execarg_addopt
(rlimit_type_by_sym): new wrapper for dynamic symbol
(rb_execarg_addopt): check for dsym via rlimit_type_by_sym
* test/ruby/test_process.rb (test_execopts_rlimit): check dsym w/o pindown
Add extra check for bogus rlimit args, too.
[ruby-core:82033] [Bug #13744]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59322 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_thread_t): move several fields which are copied at cont.c
to rb_execution_context_t.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59177 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
To convert the object implicitly, it has had two parts in convert_type() which are
1. lookink up the method's id
2. calling the method
Seems that strncmp() and strcmp() in convert_type() are slightly heavy to look up
the method's id for type conversion.
This patch will add and use internal APIs (rb_convert_type_with_id, rb_check_convert_type_with_id)
to call the method without looking up the method's id when convert the object.
Array#flatten -> 19 % up
Array#+ -> 3 % up
[ruby-dev:50024] [Bug #13341] [Fix GH-1537]
### Before
Array#flatten 104.119k (± 1.1%) i/s - 525.690k in 5.049517s
Array#+ 1.993M (± 1.8%) i/s - 10.010M in 5.024258s
### After
Array#flatten 124.005k (± 1.0%) i/s - 624.240k in 5.034477s
Array#+ 2.058M (± 4.8%) i/s - 10.302M in 5.019328s
### Test Code
require 'benchmark/ips'
class Foo
def to_ary
[1,2,3]
end
end
Benchmark.ips do |x|
ary = []
100.times { |i| ary << i }
array = [ary]
x.report "Array#flatten" do |i|
i.times { array.flatten }
end
x.report "Array#+" do |i|
obj = Foo.new
i.times { array + obj }
end
end
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58978 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
if getrusage(2) is available, to improve precision of Process.times and
its user like lib/benchmark.rb.
On macOS, since getrusage(2) has better precision than times(3),
they are much improved like:
* Before
Process.times
=> #<struct Process::Tms utime=0.56, stime=0.35, cutime=0.04, cstime=0.03>
puts Benchmark.measure { "a" * 1_000_000_000 }
0.340000 0.310000 0.650000 ( 0.674025)
* After
Process.times
=> #<struct Process::Tms utime=0.561899, stime=0.35076, cutime=0.046483, cstime=0.038929>
puts Benchmark.measure { "a" * 1_000_000_000 }
0.343223 0.310037 0.653260 ( 0.674025)
On Linux, since struct rusage from getrusage(2) is used instead of struct tms
from times(2), they are slightly improved like:
* Before
Process.times
=> #<struct Process::Tms utime=0.43, stime=0.11, cutime=0.0, cstime=0.0>
puts Benchmark.measure { "a" * 1_000_000_000 }
0.120000 0.040000 0.170000 ( 0.171621)
* After
Process.times
=> #<struct Process::Tms utime=0.432, stime=0.116, cutime=0.0, cstime=0.0>
puts Benchmark.measure { "a" * 1_000_000_000 }
0.124000 0.048000 0.172000 ( 0.171621)
[ruby-dev:49471] [Feature #11952]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58935 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (obj2uid, obj2gid): check the error number returned by
`getpwnam_r()` and `getgrnam_r()`, instead of `errno`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58662 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (obj2uid, obj2gid): use temporary string as the buffer
instead of `rb_alloc_tmp_buffer`, which is `NODE_ALLOCA` since
r51492. [ruby-core:81084] [Bug #13554]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58658 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We already check for __builtin_mul_overflow in configure but never
actually referred it before. Why not call it if available, because
that should render supposedly-optimial assembly outputs.
Optionally if __builtin_mul_overflow_p is available, which is the case
for recent GCC, use that to detect fixnum overflow. This is much
faster than the previous. On my machine generated assembly of
numeric.c:int_pow reduces from 480 to 448 bytes, according to nm(1).
Also on my machine, following script boosts from 7.819 to 6.929 sec.
time ./miniruby -e 'i=0; while i < 30_000_000 do i += 1; 7 ** 23; end'
Signed-off-by: Urabe, Shyouhei <shyouhei@ruby-lang.org>
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57784 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
CLOCK_UPTIME_RAW, and CLOCK_UPTIME_RAW_APPROX which are introduced
by macOS 10.12.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56200 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
[Bug #12628]
This patch introduce many changes.
* Introduce concept of "Block Handler (BH)" to represent
passed blocks.
* move rb_control_frame_t::flag to ep[0] (as a special local
variable). This flags represents not only frame type, but also
env flags such as escaped.
* rename `rb_block_t` to `struct rb_block`.
* Make Proc, Binding and RubyVM::Env objects wb-protected.
Check [Bug #12628] for more details.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55766 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
signal(2) is portable for SIG_DFL and SIG_IGN, so we do not
need the extra code for sigaction(2).
Also, execve will reset all signal handlers to default
anyways, so there is little sense in preserving old
signal handler besides SIG_IGN.
Hopefully this makes the code easier-to-understand and
maintain.
* process.c (disable_child_handler_fork_child): simplify
[ruby-core:75781] [Misc #12439]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55566 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (rb_f_abort): [DOC] Process.abort is a singleton
method of Process, but not an instance method.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55183 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and define CONSTFUNC and PUREFUNC if available.
Note that I don't add those options as default because
it still shows many false-positive (it seems not to consider
longjmp).
* vm_eval.c (stack_check): get rb_thread_t* as an argument
to avoid duplicate call of GET_THREAD().
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54952 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (rb_exec_getargs): honor the expected argument types
over the conversion method. the basic language functionality
should be robust. [ruby-core:75388] [Bug #12355]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54934 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This only happens on the !POSIX_SIGNAL case; but one may
test with the following:
--- a/process.c
+++ b/process.c
@@ -3479,6 +3479,7 @@ disable_child_handler_fork_parent(struct child_handler_disabler_state *old)
#endif
}
+#undef POSIX_SIGNAL
/* This function should be async-signal-safe. Actually it is. */
static int
disable_child_handler_fork_child(struct child_handler_disabler_state *old, char *errmsg, size_t errmsg_buflen)
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54890 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c: use rb_check_arity instead of rb_scan_args for simple
optional arguments.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54573 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* file.c, io.c, util.c: prefer rb_syserr_fail with saved errno
over setting errno then call rb_sys_fail, not to be clobbered
potentially and to reduce thread local errno accesses.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53264 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (rb_f_spawn): Be more specific regarding "other
values" by having "non-zero positive integers" Add nil, the
default value, as a possible value and what it means.
Try to use more consistent language.
[Fix GH-1008]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51819 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (rb_waitpid): do not release GVL when WNOHANG is set,
it should return immediately without blocking.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51793 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (rb_execarg_parent_start1): raise with the target path
name when open() failed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51787 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (rb_exec_fail): raise with the target directory name
when chdir() failed. pointed out by sorah.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51786 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Shutting down the timer thread now always closes pipes to free FDs.
In fact, we close the write ends of the pipes is done in the main
RubyVM to signal the timer thread shutdown.
To effectively close pipes, we implement userspace locks via
atomics to force the pipe closing thread to wait on any signal
handlers which may be waking up.
While we're at it, improve robustness during resource exhaustion and
allow it to limp along non-fatally if restarting a timer thread
fails.
This reverts r51268
Note: this change is tested with VM_CHECK_MODE 1 in vm_core.h
* process.c (close_unless_reserved): add extra check
(dup2_with_divert): remove
(redirect_dup2): use dup2 without divert
(before_exec_non_async_signal_safe): adjust call + comment
(rb_f_exec): stop timer thread for all OSes
(rb_exec_without_timer_thread): remove
* eval.c (ruby_cleanup): adjust call
* thread.c (rb_thread_stop_timer_thread): always close pipes
* thread_pthread.c (struct timer_thread_pipe): add writing field,
mark owner_process volatile for signal handlers
(rb_thread_wakeup_timer_thread_fd): check valid FD
(rb_thread_wakeup_timer_thread): set writing flag to prevent close
(rb_thread_wakeup_timer_thread_low): ditto
(CLOSE_INVALIDATE): new macro
(close_invalidate): new function
(close_communication_pipe): removed
(setup_communication_pipe_internal): make errors non-fatal
(setup_communication_pipe): ditto
(thread_timer): close reading ends inside timer thread
(rb_thread_create_timer_thread): make errors non-fatal
(native_stop_timer_thread): close write ends only, always,
wait for signal handlers to finish
(rb_divert_reserved_fd): remove
* thread_win32.c (native_stop_timer_thread): adjust (untested)
(rb_divert_reserved_fd): remove
* vm_core.h: adjust prototype
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51576 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
seems that rb_bug_errno() is called in sigpipe() intentionally.
https://gist.github.com/sorah/831169
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51390 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
with one of the timer thread FDs, the internal FD is diverted.
[Bug #11336] [ruby-core:69886] [Bug #11350] [ruby-core:69961]
* process.c (dup2_with_divert): new function for the above purpose.
* thread_pthread.c (rb_divert_reserved_fd): new function for
diverting reserved FD. If the given FD is the same as one of the
reserved FDs, the reserved FD number is internally changed.
It returns -1 when error. Otherwise, returns 0. It also returns
0 if there is no need to change reserved FD number.
* thread_win32.c (rb_divert_reserved_fd): always returns 0 because
of no reserved FDs.
* internal.h (rb_divert_reserved_fd): prototype declaration.
It is Ruby internal use only.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51268 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
reserved FD. It should be closed in the exec system call due to the
O_CLOEXEC or FD_CLOEXEC flag. [Bug #11353] [ruby-core:69977]
* process.c (close_unless_reserved): new function to close FD unless
it is reserved for internal communication.
* thread_pthread.c (rb_reserved_fd_p): should check owner_process pid
to avoid false positive in forked child process.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51255 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
used on every OS, not only on Mac OS X or Haiku, to prevent
timer thread communications using file descriptor 3 after
setting redirection of the fd 3 before calling exec.
[Bug #11336] [ruby-core:69886]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51209 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to generate envp_str anytime on Solaris 10 (or earlier version
of Solaris) to avoid calling execv() which is async-signal unsafe
on Solaris 10. [Bug #11265] [ruby-dev:49089]
* process.c (exec_with_sh, proc_exec_cmd): On Solaris 10,
because ALWAYS_NEED_ENVP is 1 and envp_str is always generated,
execv() in exec_with_sh() and proc_exec_cmd() are never called.
To guarantee this, execv() is replaced by a macro to print
out error message on Solaris 10.
* process.c (proc_exec_sh): Because proc_exec_sh() may be called
by rb_proc_exec() with envp_str = Qfalse, execl() is replaced
by a macro that calls execle() with "extern char **environ"
traditional global variable on Solaris 10.
TODO: This may be unsafe and sholud be changed
in the future.
Although rb_proc_exec() is not used from inside current version
of ruby, it may be called by third-party extensions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50977 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (rb_spawn_process): do not discard global escape
status. [ruby-core:69304] [Bug #11166]
* process.c (rb_execarg_spawn): extract the start procedure in a
parent process with ensuring the end procedure.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50600 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (initgroups): not declared on cygwin if _POSIX_SOURCE
or _XOPEN_SOURCE are defined.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50304 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
process blocking when opening a named pipe.
(open_func): New function.
(rb_execarg_parent_start1): Extracted from rb_execarg_parent_start and
use rb_thread_call_without_gvl2 to release GVL when opening a file.
(rb_execarg_parent_start): Invoke rb_execarg_parent_start1 via
rb_protect and invoke rb_execarg_parent_end when error.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50198 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c: "spawn" opens files in the parent process.
(check_exec_redirect): Add an placeholder for fd in parameters
for fd_open.
(check_exec_fds_1): Delete fd_open condition.
(check_exec_fds): Don't call check_exec_fds_1 with fd_open.
(rb_execarg_parent_start): Open files specified as "spawn" options
and add "dup2" options.
(rb_execarg_parent_end): New function to close opened fds.
(run_exec_open): Removed.
(rb_execarg_run_options): Don't call run_exec_open.
(rb_spawn_internal): Call rb_execarg_parent_end.
* io.c (pipe_open): Call rb_execarg_parent_end.
* ext/pty/pty.c (establishShell): Call rb_execarg_parent_end.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50194 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* hash.c (env_aset): state that ENV keys must be strings.
* process.c (rb_f_spawn): ditto. [ruby-core:68146] [Bug #10859]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49635 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It seems waitpid() is universaly available on POSIX platforms.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49037 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (rb_fork_async_signal_safe): remove initialized but
never assigned local variables.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48769 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
use 0 for rb_data_type_t::reserved instead of NULL, since its type
may be changed in the future and possibly not a pointer type.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48662 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (check_exec_redirect_fd, check_exec_redirect),
(rb_execarg_addopt): get rid of inadvertent ID pindown.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48552 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Note: Some of the fixes are for newlib in general but not NaCl-specific.
* include/ruby/intern.h (rb_fd_select): declare struct timeval, or the
struct gets local to the function in C99.
* file.c (#include): add nacl/stat.h for PNaCl.
(utimes): added a declaration for PNaCl.
(stat_atimespec): stat::st_atimensec is long long but
timespec::tv_nsec is long in PNaCl.
(stat_mtimespec, stat_ctimespec): ditto.
(rb_group_member): disable getgroups unless HAVE_GETGROUPS.
(eaccess): unify the fallback to generic defined(USE_GETEUID).
* io.c: include sys/time.h for struct timeval.
(rb_close_before_exec): nothing we can do if F_GETFD is not
available.
(ioctl): pnacl newlib actually doesn't have ioctl.
* process.c (maxgroups): it is used iff
defined(_SC_NGROUPS_MAX) || defined(NGROUPS_MAX) but not
defined(HAVE_GETGROUPS) || defined(HAVE_SETGROUPS).
(obj2gid): fail unless the object is a Fixnum if getgrnam is not
available.
(disable_child_handler_fork_child): sigaction is not available in
PNaCl newlib.
* configure.in (warnflags, strict_warnflags): avoid -ansi for strlcpy.
(rb_cv_gcc_atomic_builtins): also check
__atomic_or_etch because it is used in ruby_atomic.h.
(rb_cv_gcc_sync_builtins): ditto.
(HAVE_GETGRNAM): added.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47882 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (free_exec_arg): remove
(memsize_exec_arg): ptr is never NULL
(exec_arg_data_type): use RUBY_TYPED_DEFAULT_FREE
* variable.c (autoload_i_free): remove
(autoload_data_i_type): use RUBY_TYPED_DEFAULT_FREE
(autoload_memsize): ptr is never NULL
* vm_backtrace.c (location_free): remove
(location_mark): ptr is never NULL
(location_data_type): use RUBY_TYPED_DEFAULT_FREE
(backtrace_mark): ditto
(backtrace_free): ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47572 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (Init_process): subclass Thread as Process::Waiter
(rb_detach_process): use Process::Waiter instead of singleton class
* test/ruby/test_process.rb (test_process_detach): new test
* inits.c (rb_call_inits): call Init_Thread before Init_process to
ensure Process::Waiter may be a subclass of Thread
Thanks to headius for reporting [Bug #10231]
Thanks to nobu for review of my initial patch.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47561 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (retry_fork_async_signal_safe): revert r47439 but
disable use of vfork on OS X instead, as it cause hang-up at
test_process.rb:test_deadlock_by_signal_at_forking with parallel
test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47441 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (retry_fork_async_signal_safe): vfork may not work
with pthread always even if fork works with it.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47439 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (rb_exec_without_timer_thread): add missing semicolon
to fix compilation error on OS X and Haiku.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47424 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (getresuid): Defined for AIX.
(getresgid): Ditto
AIX don't have getresuid/getresgid but getuidx/getgidx.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47397 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
vfork() is still faster than fork() especially when the parent
process uses big memory.
ruby -rbenchmark -e 'a = "a" * 1_000_000_000; puts Benchmark.measure { system("true") }'
fork: 0.000000 0.010000 0.010000 ( 0.014968)
vfork: 0.000000 0.000000 0.000000 ( 0.000912)
on Debian sid.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47363 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
retry_fork respect to rb_fork_async_signal_safe.
(retry_fork_ruby): Specialized version of retry_fork respect to
rb_fork_ruby.
(rb_fork_ruby): Removed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47357 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (rlimit_resource_type, rlimit_resource_value): get rid
of function calls in RSTRING_PTR(), as it evaluates the argument
twice.
* re.c (match_backref_number): ditto.
* signal.c (esignal_init, rb_f_kill, trap_signm): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47006 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (open): use UTF-8 version function to support
non-ascii path properly. [ruby-core:63185] [Bug #9946]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46441 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (run_exec_open): use a local variable to get rid of
RARRAY_AREF() is evaluated multiple times by RSTRING_PTR().
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46439 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (check_exec_redirect): use RB_TYPE_P instead of single
comparison of TYPE().
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46435 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
(OBJ2GID1): Defined even if getgrnam_r is not usable.
This fixes compilation error on Android.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45541 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (obj2uid, obj2gid): now getpwnam_r() and getgrnam_r()
may need larger buffers than sysconf values, so retry with
expanding the buffer when ERANGE is returned.
[ruby-core:61325] [Bug #9600]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45290 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (obj2uid, obj2gid): need capacity as buffer size, not
length.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45289 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (GETPW_R_SIZE_INIT, GETGR_R_SIZE_INIT): sysconf values
are not maximum sizes, but initial sizes.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45288 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (OBJ2UID1, OBJ2GID1): separate from OBJ2UID and
OBJ2GID respectively, need given buffers.
* process.c (OBJ2UID, OBJ2GID): no longer need PREPARE_GETPWNAM
and PREPARE_GETGRNAM.
* process.c (obj2uid, obj2gid): use tmp buffer instead of alloca
to get rid of potential stack overflow.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45287 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
nobu
kazu
normal
k0kubun
shyouhei
stomar
mrkn
ko1
hsbt
watson1978
sorah
naruse
akr
usa
kosaki
ngoto
yugui
ktsj