I assumed that ISeq is never GC-ed by `in_jit` + `mjit_mark` on copy job
ISeq, but unfortunately I found SEGV on `mjit_copy_job_handler` in which
iseq->body was somehow Qnil. And it seems to be fixed by disabling the
job when `mjit_free_iseq` is called for the ISeq.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67551 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
as debugged in PR
[close https://github.com/ruby/ruby/pull/2130]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67549 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This reverts commit a1b5d20068.
Revert "Revert "Skip recompiling tests on i686 Linux""
This reverts commit 7b88a9207b.
Revert "Simplify matrix for debugging"
This reverts commit e85d6c5c5e.
Sorry, these 3 commits were under debugging in
https://github.com/ruby/ruby/pull/2129 but accidentally merged by using
`git svn dcommit` instead of `git push` to the topic branch 🙇
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67538 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
I'm writing `//` comments in newer MJIT code after C99 enablement
(because I write 1-line comments more often than multi-line comments
and `//` requires fewer chars on 1-line) and then they are mixed
with `/* */` now.
For consistency and to avoid the conversion in future changes, let me
finish the rewrite in MJIT-related code.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67533 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It seems that `debug_counter_show_results_at_exit` could be called
earlier than `mjit_finish` sometimes.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67380 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and guard iseq from GC by marking iseq in mjit_copy_job.
This is a refactoring for implementing inlining later and
should not be fixing or introducing any bugs.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67286 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* --jit-min-calls: 5 -> 10000
--jit-min-calls=5 obviously can compile non hotspot. This was not a
problem for MJIT-benchmarks and Optcarrot because the former has very
few hot optimiziable methods and the latter is likely to trigger
compilation of hotspot by its intensive calls to optimizable hotspot
methods and has a very short window to allow limited compilations.
In real-world applications, it has more time to compile more methods and
it pressures computer's limited resources like icache. We should avoid
compiling too many methods. Also compiling many methods exhausts time
budget for compilation in one ruby process lifetime and delays the "JIT
compaction" of Ruby 2.6.
JVM is known to use 1,500 for C1 (client) compiler and 10,000 for C2
(server) compiler for -XX:CompileThreshold by default.
https://docs.oracle.com/javase/8/embedded/develop-apps-platforms/codecache.htm
When things are called X,000 times, requiring 10,000 can eliminate
compilation of methods which are called only once in these X,000
iterations and obviously not hotspot. And in fact things like
unicorn-worker-killer restarts unicorn process every 4096 requests.
So I felt 10,000 is good for such an environment.
* --jit-max-cache: 1000 -> 100
By the same reason stated above, we should not allow compiling many
methods especially on MJIT which has a larger overhead due to poor code
locality by dlopen and whose code is also likely to be bigger by just
inlining many VM instructions with -O3 rather than directly generating
low-level code.
In JVM -XX:ReservedCodeCacheSize is 32M for reserved and 48M for maximum.
--jit-max-cache=1,000 could be closer to it, but in this case MJIT's
compilation is slow due to data synchronization between threads (to be
improved in Ruby 2.7 though) and we do not want to delay the "JIT
compaction" for a long time.
So I chose a really conservative number for this, but by having method
inlining in the future, wider range could be optimized even with this
value.
* Optcarrot
--disable-gems, --benchmark Lan_Master.nes 12 attempts.
No significant impact.
| r67276 | r67276 --jit | after --jit |
|:-------------------|:------------------|:------------------|
| 50.44369263063978 | 72.87390680773056 | 73.47873485047297 |
| 50.58788746124193 | 78.06820808947026 | 78.29723420171945 |
| 50.77509250801378 | 80.29010348842613 | 78.94689404460769 |
| 50.935361702064405 | 80.42796829926374 | 80.39539527351525 |
| 51.27352672981195 | 81.98758158033202 | 81.6754198664817 |
| 51.720715743242124 | 82.00118535811626 | 82.22960569251283 |
| 51.89643169822524 | 82.2290091613556 | 82.5013636146388 |
| 51.95895898113868 | 82.37318990939565 | 82.74002377794454 |
| 52.10124886807968 | 82.48796686037502 | 83.23354941183932 |
| 52.292280637519376 | 83.0265226541066 | 84.01552618012572 |
| 52.51856237784144 | 83.8797360318052 | 84.8588319093393 |
| 52.65076845986818 | 84.80037351256634 | 85.13577756273656 |
* Railsbench
`WARMUP=20000 BENCHMARK=1000 bin/bench` of https://github.com/k0kubun/railsbench.
It gets closer to --disable=jit.
| | r67276 | r67276 | after |
| | | --jit | --jit |
|:----------|:-------|:-------|:-------|
| req/s | 891.3 | 742.2 | 841.5 |
|:----------|:-------|:-------|:-------|
| 50%ile ms | 1.00 | 1.21 | 1.08 |
| 66%ile ms | 1.02 | 1.24 | 1.09 |
| 75%ile ms | 1.03 | 1.28 | 1.10 |
| 80%ile ms | 1.03 | 1.30 | 1.11 |
| 90%ile ms | 1.09 | 1.42 | 1.15 |
| 95%ile ms | 1.32 | 1.65 | 1.27 |
| 98%ile ms | 4.79 | 2.23 | 1.81 |
| 99%ile ms | 5.68 | 7.52 | 6.64 |
|100%ile ms | 6.52 | 9.69 | 8.59 |
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67277 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and functions to clarify the intention and make sure it's not used in a
surprising way (like using 2, 3, ... other than 0, 1 even while it seems
to be a boolean).
This is a retry of r66775. It included some typos...
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66778 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This reverts commit bb1a1aeab0.
We hit something on ci.rvm.jp, reverting until investigation is done.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66776 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and functions to clarify the intention and make sure it's not used in a
surprising way (like using 2, 3, ... other than 0, 1 even while it seems
to be a boolean).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66775 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
get_uniq_filename never returns NULL but raises an exception on
failure.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66292 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Give the whole MJIT header path name by preloaded shared library
mjit_build_dir.so, than building the path from a given directory
name and the embedded base name.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66280 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It is not needed since we have LIST_HEAD_INIT initializer in
mjit_worker.c
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66203 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
in a new variable cc_common_args.
`cflags=-save-temps=obj` makes MJIT fail like:
https://rubyci.org/logs/www.rubyist.net/~akr/chkbuild/debian/ruby-trunk/log/20181203T095000Z.log.html.gz
This rubyci specifies -save-temps=obj in CFLAGS to use update-deps, and
the flag is harmful when we want to use -pipe flag.
mjit_worker.c: prefer cc_common_args over CC_COMMON_ARGS
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66164 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
because we mostly use cc_path now and the comment is obsolete (CC_PATH
is now absolute path and the TODO is already resolved).
mjit.c: use CC_COMMON_ARGS[0] directly
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66162 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
postponed_job is safe to use in signal handlers, but is not
thread-safe for MJIT. Implement a workqueue for MJIT
thread-safety.
[Bug #15316]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66100 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
-local variable to global variable.
Consider this case:
1. MJIT worker: dequeue ISeq (stop_worker_p was still FALSE)
2. Ruby thread: call Kernel#exec, which calls mjit_finish(FALSE),
sets `stop_worker_p = TRUE`, and fires RUBY_VM_CHECK_INTS() once
3. MJIT worker: register copy job, but found stop_worker_p is TRUE.
set `worker_stopped = TRUE` and the thread stops.
4. Function-local job variable expires by the thread stop (this is eliminated by this commit)
5. Ruby thread: find `worker_stopped` becamse TRUE, start Kernel#exec.
Kernel#exec fails but exception is rescued.
6. Ruby thread: call RUBY_VM_CHECK_INTS. copy job is dispatched but job variable
is already expired.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66035 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
because JIT-ed code may still be on stack at this time, unlike
in ruby_cleanup().
This hopes to fix: (take 2)
http://ci.rvm.jp/results/trunk-mjit-wait@silicon-docker/1480207
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65999 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
http://ci.rvm.jp/results/trunk-mjit-wait@silicon-docker/1480173
It tries to print C backtrace but fails. And core file on the server
seems to be stopping on the irrelevant place due to its own signal
handler for the dump.
And I failed to reproduce this SEGV on my machine.
I don't know why it's broken, so let me try this change to investigate
the reason of SEGV.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65997 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
it didn't work.
http://ci.rvm.jp/results/trunk-mjit@silicon-docker/1468677
and skips broken tests for now. But this issue should be fixed soon.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65814 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to prevent from proceeding one for MJIT while it's not safe yet.
By that situation, MJIT worker could be waiting for compiler process forever
http://ci.rvm.jp/results/trunk-mjit@silicon-docker/1468033
[Bug #15320]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65807 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
by launching MJIT worker thread in child Ruby process.
See the comment before `mjit_child_after_fork` for details.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65785 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* Makefile.in (mjit_build_dir.so): separate MJIT_BUILD_DIR to
eliminate the feature for test-all after installation.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65587 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
-available region. reducing risk of SEGV in mjit_copy_job_handler() like
http://ci.rvm.jp/results/trunk-mjit@silicon-docker/1446117
I'm not sure which exact part is causing "[BUG] Segmentation fault at 0x0000000000000008"
on `(mjit_copy_job_handler+0x12) [0x564a6c4ce632] /home/ko1/ruby/src/trunk-mjit/mjit.c:26`...
mjit.c: ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65569 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* Makefile.in (mjit_build_dir.so): separate MJIT_BUILD_DIR to
eliminate the feature for test-all after installation.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65563 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* mjit.c (init_header_filename): sticky-mode directory probably
would be less unsafe even if it is not owned.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65551 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_mjit_unit can either exist in unit_queue or active_units, but
not both. This will make state transitions for event-based MJIT
process management easier.
v2: recheck unit->iseq after GC wakeup
The iseq may be GC-ed while we were waiting for it since we
delete the unit from unit_queue during get_from_list
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65475 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
https://bugs.ruby-lang.org/issues/14867#note-112
I wanna touch similar places. To avoid our conflict, let me merge Eric's patch earlier.
Let's watch trunk-mjit / trunk-mjit-wait CIs.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65473 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_mjit_unit can either exist in unit_queue or active_units, but
not both. This will make state transitions for event-based MJIT
process management easier.
[ruby-core:89654]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65468 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
For robustness against future changes. There should be no impact
at the moment,here, but we may call mjit_finish more than once
in a process lifetime in the future (implementing "stop"
instead of just "pause")
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65443 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Given that `copy_cache_from_main_thread()` breaks the loop when `stop_worker_p`
is TRUE, memory of `job` allocated by `alloca` may be invalid if `stop_worker_p`
is already TRUE.
mjit_worker.c: explain why `copy_cache_from_main_thread()` should not
stop checking `stop_worker_p`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65312 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
on VM_CHECK_INTS. Letting MJIT worker directly see inline cache which
may be being updated could result in inconsistent IC index and serial.
mjit_worker.c: request the copy job after dequeue, and receive the
result synchronously.
tool/ruby_vm/views/_mjit_compile_ivar.erb: use the copied IC
mjit_compile.c: change the interface to pass is_entries
mjit.h: ditto
=== Optcarrot Benchmark ===
Thankfully this didn't have major performance regression.
$ benchmark-driver benchmark.yml --rbenv 'before::before --disable-gems --jit;after::after --disable-gems --jit' -v --repeat-count 24
before: ruby 2.6.0dev (2018-10-21 trunk 65263) +JIT [x86_64-linux]
after: ruby 2.6.0dev (2018-10-21 trunk 65263) +JIT [x86_64-linux]
last_commit=mjit.c: copy inline cache values to MJIT worker
Calculating -------------------------------------
before after
Optcarrot Lan_Master.nes 85.421 85.454 fps
Comparison:
Optcarrot Lan_Master.nes
after: 85.5 fps
before: 85.4 fps - 1.00x slower
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65275 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.ac: introduce new configure option `--enable-mjit` and
`--disable-mjit`. Default is "enable".
`--disable-mjit` disables all of MJIT features so that `ruby --jit`
can't enable MJIT.
This option affect a macro `USE_MJIT`.
This change remove `--enable/disable-install-mjit-header` option.
* Makefile.in: introduce the `ENABLE_MJIT` variable.
* common.mk: use `ENABLE_MJIT` option.
* internal.h: respect `USE_MJIT`. Same as other *.c, *.h.
* test/ruby/test_jit.rb: check `ENABLE_MJIT` key of rbconfg.rb.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65204 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
after the first compilation on --jit-wait.
Previously the assignment to `func` didn't have meaning for the behavior,
and the compiled code wasn't called immediately after the synchronous
compilation. It wasn't intentional.
Fixing this issue without impacting performance without --jit-wait is
not so obvious. Adding branch or goto to call func in mjit_exec spoiled
the performance without --jit-wait. Instead of that, I called the func
inside mjit_wait_call() (former mjit_get_iseq_func()) which is never
inlined to mjit_exec(). Thanks to that, this commit has no impact for
normal performance.
mjit.c: ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64929 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
of mjit_worker(). It was needed when mjit_worker.c is separated from
mjit.c, but it's now just included.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64306 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
instead of linking functions with mjit_worker.o.
In the r64285's structure, we needed to publish some variables with
mjit_ prefix. But ideally those variables should be completely private
in mjit.o (or old mjit_worker.o), and it was hard.
So I chose an approach similar to vm*.c for mjit.c and mjit_worker.c.
I believe mjit_compile.c is still nice to be separated.
After this commit, I'll remove the mjit_ prefix again...
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64289 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
from mjit.c because it's executed only on MJIT worker thread.
Instead of that, `valid_class_serials` is shared with mjit_ prefix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64288 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
which was just forgotten.
mjit.c: ditto
mjit_internal.h: moved some macros only used by mjit_worker.c to it.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64287 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The motivation of this change is to make sure rb_funcall or GC-related
functions are not called on worker-related code. Currently such
functions are used in some places and I believe it's partly because it's
hard to identify which part is called on MJIT worker thread.
Now, mjit.c is safe to use them but we know we need to safely deal with
mjit_compile.c, mjit_worker.c and mjit_internal.h.
mjit_compile.c: update the comment about it
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64285 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* version.c (Init_ruby_description): separate to initialize
RUBY_DESCRIPTION constant according to mjit.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64264 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
by sharing it with vm.c in internal.h.
vm.c: ditto
internal.h: ditto
mjit.h: share more.
mjit.c: make sure the third arguemnt is not used
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64253 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and wait until JIT queue is flushed when wait option is not passed or
`wait: true` is passed.
vm.c: ditto
test/ruby/test_rubyvm_mjit.rb: added test for pause/resume
test/lib/jit_support.rb: allow retrying MJIT on JITSupport level
test/ruby/test_jit.rb: ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64250 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
[Bug #14867] implemented exactly what was needed (for POSIX
platforms, at least).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64225 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
By this commit's changes in other files, now MJIT started to work on VC++.
Unfortunately some features are still broken and they'll be fixed later.
This also suppresses cl.exe's default output to stdout because there
seems to be no option to do it. Tweaking some log messages as well.
vm_core.h: declare `__declspec(dllimport)` to export them correctly on mswin.
vm_insnhelper.h: ditto
mjit.h: ditto
test_jit.rb: skipped some pending tests.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64221 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This option makes sure that the argument is C source file.
Probably this is not needed, but since I'm debugging it, I want to
exclude any failure possibility for now.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64196 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This is needed to resolve:
"error LNK2011: precompiled object not linked in; image may not run"
win32/Makefile.sub: Use the same flags as ones for precompiled header.
This is needed to resolve:
"error C2855: command-line option '/Z7' inconsistent with precompiled header"
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64192 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
on mswin properly.
Deleted code to attempt make_pch for mswin, since it won't be needed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64190 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
file name correctly. This allows to use the header installed by r64188.
win32/Makefile.sub: define prebuilt precompiled header path instead of
unused min header path
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64189 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
because linking multiple .o files is problematic without having `static`
to the same function definitions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64162 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
is specified.
This is needed for MinGW because MJIT_BUILD_DIR doesn't prefix path
like "C:\msys64", so it can't be read without msys2's conversion.
The workaround is not needed for Windows (LOAD_RELATIVE looks defined by
default) anyway. So removed it for such environment.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64161 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
on MinGW with __atomic_exchange_n(). It returns the previous pointer value but
obviously it's not needed in MJIT's usage.
mjit.c: In function 'compact_all_jit_code':
ruby_atomic.h:11:36: warning: value computed is not used [-Wunused-value]
# define ATOMIC_EXCHANGE(var, val) __atomic_exchange_n(&(var), (val), __ATOMIC_SEQ_CST)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64160 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This macro shall be shared among other files, not just for mjit.c.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64156 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
when $MJIT_SEARCH_BUILD_DIR is set.
If prefix path is owned by root, `make install` needs to be run by root.
But in general we don't want to run `make test-all`, and also running
`make test-all` currently fails due to permission tests of rdoc and rubygems.
Thus, prior to this commit, specifying a prefix like "/usr/local" could
mean there was no way to pass test-all.
So we should not depend on `make install` for `make test-all`. Thus I
reverted r64104 and r64103, and applied this workaround to pass `make
test-all` without `make install`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64143 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We see several occurrence of "diagnostic push/pop" so why not
make them macros. Tested on GCC8 / Clang 6.
Note that ruby.h is intentionally left untouched because we don't
want to introduce new public macros.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64118 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to use compaction with --jit-save-temps.
Prior to this commit, JIT compaction didn't work with --jit-save-temps
but it wasn't intentional.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64100 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
When --jit-wait is specified, `unit_queue.length` is always 0 and it's
not a good metric.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64097 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
When all compilation finishes or the number of JIT-ed code reaches
--jit-max-cache, this compacts all generated code to a single .so file
and re-loads all methods from it.
In the future, it may trigger compaction more frequently and/or limit
the maximum times of compaction to prevent unlimited memory usage.
So the current behavior is experimental, but at least the performance
improvement in this commit won't be removed.
=== Benchmark ===
In this benchmark, I'll compare following four conditions:
* trunk: r64082
* trunk JIT: r64082 w/ --jit
* single-so JIT: This commit w/ --jit
* objfcn JIT: This branch https://github.com/k0kubun/ruby/tree/objfcn w/ --jit,
which is shinh's objfcn https://github.com/shinh/ruby/tree/objfcn rebased from this commit
```
$ uname -a
Linux bionic 4.15.0-29-generic #31-Ubuntu SMP Tue Jul 17 15:39:52 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
```
* Micro benchmark
Using this script https://gist.github.com/k0kubun/10e6d3387c9ab1b134622b2c9d76ef51,
calls some amount of different methods that just return `nil`. The following tables
are its average duration seconds of 3 measurements.
Smaller is better.
** 1 method (seconds)
| | trunk | trunk JIT | single-so JIT | objfcn JIT |
|:------|:------------------|:------------------|:------------------|:------------------|
| Time | 5.576067774333296 | 5.915551971666446 | 5.833641665666619 | 5.845915191666639 |
| Ratio | 1.00x | 1.06x | 1.05x | 1.05x |
** 50 methods (seconds)
| | trunk | trunk JIT | single-so JIT | objfcn JIT |
|:------|:------------------|:------------------|:------------------|:------------------|
| Time | 3.1661167996666677| 6.125825928333342 | 4.135432743666665 | 3.750358728333348 |
| Ratio | 1.00x | 1.93x | 1.31x | 1.18x |
** 1500 methods (seconds)
| | trunk | trunk JIT | single-so JIT | objfcn JIT |
|:------|:------------------|:------------------|:------------------|:------------------|
| Time | 5.971650823666664 | 19.579182102999994| 10.511108153999961| 10.854653588999932|
| Ratio | 1.00x | 3.28x | 1.76x | 1.82x |
* Discourse
Using the same benchmark strategy as https://bugs.ruby-lang.org/issues/14490 with
this branch https://github.com/k0kubun/discourse/commits/benchmark2 forked from discourse
v1.8.11 to support running trunk.
1. Run ruby script/bench.rb to warm up profiling database
2. Run RUBYOPT='--jit-verbose=1 --jit-max-cache=10000' RAILS_ENV=profile bin/puma -e production
3. WAIT 5-15 or so minutes for all jitting to stop so we have no cross talk
4. Run ab -n 100 http://localhost:9292/
5. Wait for all new jitting to finish
6. Run ab -n 100 http://localhost:9292/
** Response time (ms)
Here is the response time milliseconds for each percentile.
Skipping 99%ile because it's the same as 100%ile in 100 calls.
| | trunk| trunk|single|objfcn|
| | | JIT|so JIT| JIT|
|:----|:-----|:-----|:-----|:-----|
| 50% | 38 | 45 | 41 | 43 |
| 66% | 39 | 50 | 44 | 44 |
| 75% | 47 | 51 | 46 | 45 |
| 80% | 49 | 52 | 47 | 47 |
| 90% | 50 | 63 | 50 | 52 |
| 95% | 60 | 79 | 52 | 55 |
| 98% | 91 | 114 | 91 | 91 |
|100% | 97 | 133 | 96 | 99 |
** Ratio (smaller is better)
Here is the response time increase ratio against no-JIT trunk's one.
| | trunk| trunk|single|objfcn|
| | | JIT|so JIT| JIT|
|:----|:-----|:-----|:-----|:-----|
| 50% | 1.00x| 1.18x| 1.08x| 1.13x|
| 66% | 1.00x| 1.28x| 1.13x| 1.13x|
| 75% | 1.00x| 1.09x| 0.98x| 0.96x|
| 80% | 1.00x| 1.06x| 0.96x| 0.96x|
| 90% | 1.00x| 1.26x| 1.00x| 1.04x|
| 95% | 1.00x| 1.32x| 0.87x| 0.92x|
| 98% | 1.00x| 1.25x| 1.00x| 1.00x|
|100% | 1.00x| 1.37x| 0.99x| 1.02x|
While 50 and 60 %ile are still worse than no-JIT trunk, 75, 80, 90, 95,
98 and 100% are not slower than that.
So now it's a little harder to say "MJIT slows down Rails applications".
Probably I can close [Bug #14490] now. Let's start improving it.
Close https://github.com/ruby/ruby/pull/1921
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64094 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and lazily delete them on termination.
This will be needed to create a large so file later.
The large number of .o files will be probably compacted before the large so
file is created.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64077 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
units, renaming it from NOT_COMPILABLE_JIT_ISEQ_FUNC.
NOT_READY_JIT_ISEQ_FUNC is for ones being compiled, so
mjit_get_iseq_func treats it specially and it shouldn't be used for the
purpose.
I renamed it instead of adding a new one because I'm not sure about the
impact for the performance by increasing the switch branches in mjit_exec.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64076 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
by whether on mswin or not.
This is needed because I'm going to renew the compilation process for
unix, keeping mswin builds as it is, at first.
This commit is not changing the behavior at all.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64051 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
which was missing in r64033.
Prior to r64033, memory allocation failure had been checked by
TRY_WITH_GC and handled by rb_memerror. But calling rb_memerror on MJIT
worker is problematic since it does EC_JUMP_TAG in the end. Threads
except Ruby's main thread must not use it.
mjit_compile.c: ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64037 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
mjit_compile.c: ditto.
REALLOC_N, ALLOC_N and xmalloc trigger GC but it's not expected.
Other allocation calls in mjit.c are executed on Ruby's main thread and
thus fine.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64033 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
pthread_atfork is not idempotent and repeatedly calling it
causes it to register the same hook repeatedly; leading to
unbound memory growth.
Ruby already has a (confusing-named) internal API for to call
in the forked child process: rb_thread_atfork
Call the MJIT child_after_fork hook inside that to prevent
unbound growth with the following loop:
loop do
RubyVM::MJIT.pause
RubyVM::MJIT.resume
end
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63884 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We started checking return value of waitpid, so it needs
to be correct for win32 platforms for MJIT to work.
Thanks-to: MSP-Greg (Greg L) <Greg.mpls@gmail.com>
[ruby-core:87832] [Bug #14867]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63869 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Partially revert r63820. mjit.c seems to have different idea of
"pid" type/size than the rest of Ruby on win32.
As noted in [ruby-core:87794], this seems to break Greg's build.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63856 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Reading win32/win32.c waitpid implementation, maybe waitpid(-1, ...)
on that platform will never conflict with mjit use of waitpid.
In any case, I've added WAITPID_USE_SIGCHLD macro to vm_core.h
so it can be easy for Linux/BSD users to test (hopefully!)
win32-compatible code.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63855 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The change is unstable on Windows. Please re-commit it when it correctly
supports Windows.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63852 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* mjit.c (exec_prcess): use PRI_PIDT_PREFIX for pid.
* win32/Makefile.sub (PRI_PIDT_PREFIX): force to "I".
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63820 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Some systems lack SIGCHLD or have incomplete SIGCHLD
implementations. So enable polling mode for them.
[ruby-core:87705] [Bug #14867]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63795 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Use a global SIGCHLD handler to guard all callers of rb_waitpid.
To work safely with multi-threaded programs, we introduce a
VM-wide waitpid_lock to be acquired BEFORE fork/vfork spawns the
process. This is to be combined with the new ruby_waitpid_locked
function used by mjit.c in a non-Ruby thread.
Ruby-level SIGCHLD handlers registered with Signal.trap(:CHLD)
continues to work as before and there should be no regressions
in any existing use cases.
Splitting the wait queues for PID > 0 and groups (PID <= 0)
ensures we favor PID > 0 callers.
The disabling of SIGCHLD in rb_f_system is longer necessary,
as we use deferred signal handling and no longer make ANY
blocking waitpid syscalls in other threads which could "beat"
the waitpid call made by rb_f_system.
We prevent SIGCHLD from firing in normal Ruby Threads and only
enable it in the timer-thread, to prevent spurious wakeups
from in test/-ext-/gvl/test_last_thread.rb with MJIT enabled.
I've tried to guard as much of the code for RUBY_SIGCHLD==0
using C "if" statements rather than CPP "#if" so to reduce
the likelyhood of portability problems as the compiler will
see more code.
We also work to suppress false-positives from
Process.wait(-1, Process::WNOHANG) to quiets warnings from
spec/ruby/core/process/wait2_spec.rb with MJIT enabled.
Lastly, we must implement rb_grantpt for ext/pty. We need a
MJIT-compatible way of supporting grantpt(3) which may spawn
the `pt_chown' binary and call waitpid(2) on it.
[ruby-core:87605] [Ruby trunk Bug#14867]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63758 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Before r63744, we let execvp(3) fail instead and it was quiet.
The verbosity was causing test_search to fail in
test/ruby/test_rubyoptions.rb when PATH is set to /tmp.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63748 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
ptrdiff_t is a signed type, use uintptr_t instead for unsigned
comparisons. This is needed to allow MJIT tests to pass on
32-bit x86 GNU/Linux.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63746 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This seems required on FreeBSD 11.1 (clang 4.0.0) and
Debian stretch (clang 3.8.1) for shared libraries.
Note: Not checking __linux__ because there are statically-linked
Linux distros (I don't know if they can support MJIT). But
glibc doesn't support static linking, so we guard on that.
Maybe other platforms will need this, too.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63745 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
execvp(3) is not async-signal-safe and may alter libc internal
states (e.g. those used by malloc). However execv(3) is
async-signal-safe as of POSIX.1-2008.
So perform the PATH lookup in the parent and use execv(3)
in the child.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63744 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
when TracePoint is enabled. We're cancelling JIT-ed code execution AFTER
each instruction, but there is no guard before the first insn of method.
To prevent spoiling performance, I don't want to modify the JIT-ed code
to fix this. So this commit replaces `mjit_enabled` check with `mjit_call_p`
check.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63734 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
`RubyVM::MJIT.enabled?`.
It's set to be TRUE even before initialization is finished.
So it was actually not "mjit initialized predicate".
This flag is also used to check whether JIT-ed code should be called
or not, but I'm going to split the responsibility to another flag.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63732 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
thread_pthread.c: Drop pthread_attr_setscope usage. It seems that,
at least on Linux and macOS, PTHREAD_SCOPE_PROCESS is not supported
and thus PTHREAD_SCOPE_SYSTEM should be used by default.
Let's just stop calling this until we find some platform that needs
`pthread_attr_setscope(&attr, PTHREAD_SCOPE_SYSTEM)`.
[Misc #14854]
From: fd0 (Daisuke Fujimura)
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63730 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.ac: clock_gettime or gettimeofday must exist.
* process.c (rb_clock_gettime): prefer clock_gettime over
gettimeofday, as the latter is obsolete in SUSv4.
* random.c (fill_random_seed): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63663 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Some comments say "stop", others say "finish".
I'm going to add code which dynamically stops MJIT worker, rather than
finishing it forever. So I'm thinking `stop` is more appropreate for it.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63593 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* Makefile.in, win32/Makefile.sub (mjit_config.h): expand min
header name, including the version number and the suffix.
* mjit.c (init_header_filename): the version number and the suffix
are now included in the header name.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63279 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* mjit.c (clean_so_file): removed unnecessary undef of `Sleep`
which is redfined as rb_w32_sleep. eventually, retry loop with
sleep has been removed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63274 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* mjit.c (dlclose): use FreeLibrary to manage the reference count
on the loaded module properly.
* mjit.c (clean_so_file): clean shared object file after unloaded,
in-use files cannot be removed on Windows.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63273 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* mjit.c (CC_LIBS): MJIT_LIBS is used only on Windows.
* mjit.c (compile_c_to_so): moved source and shared object files
to simplify indexes.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63272 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* ruby.c (ruby_init_loadpath_safe): store prefix and archlibdir
paths.
* mjit.c (compile_c_to_so, init_header_filename): use just one
library path on Windows.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63269 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
There's no reason to use CLOCK_REALTIME for any condvars in Ruby.
Indeed, we initialized all condvars with RB_CONDATTR_CLOCK_MONOTONIC
anyway; so simplify our code and reduce ifdefs.
[ruby-core:85639] [Misc #14497]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63238 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
for toplevel self.
Toplevel self's class is not `Object` but `#<Class:Object>`.
This commit allows to inline method call setup for toplevel methods.
I've thought r63053 works but it doesn't...
I actually want to add all singleton classes but I'm not sure what's the
good way for it. I assumed that using ObjectSpace.each_object is suboptimal.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63077 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Without this change, we couldn't inline method call setup for methods
which are defined in the top level.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63053 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Sometimes test hangs in `mjit_get_iseq_func` like this:
http://ci.rvm.jp/results/trunk-test@ruby-sky3/659391
It seems that a process waiting in `mjit_get_iseq_func` does no longer
have MJIT worker thread. We don't wait for JIT finish forever. So I
added timeout for the case. I'm not sure why there was no MJIT worker
thread in ruby-sky3 test process though.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62785 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
`mjit_finish` may destroy mutex even while it's still locked by
`worker` by race condition. That would result in the following error:
[BUG] pthread_mutex_destroy: Device or resource busy (EBUSY)
Actually I couldn't get a core dump for it and reproduce it multiple
times. So I'm not sure this fixes the issue which I faced or not.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62714 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
in version output.
version.h: ditto
ruby.c: propagate option for it
common.mk: updated dependency for version.c
mjit.c: overwrites the RUBY_DESCRIPTION to have +JIT when --jit is passed
test/ruby/test_rubyoptions.rb: add test for them
Only `ruby --jit -v` will have "+JIT", but this is intentional.
This may not be convenient for debugging by ticket with `ruby -v`,
but it's convenient for benchmark tools that pass options (--jit)
when showing it. At least such behavior is planned for benchmark_driver.gem
and this behavior is designed for it. Other benchmark tools are
recommended to follow the behavior too if they show version.
RUBY_DESCRIPTION might be useful for it too.
The position of "+JIT" is changed from original proposal because other
platforms like JRuby and TruffleRuby end it with archtecture.
It's made similar to JRuby, but it's upper-cased because Matz made approval
for "+JIT" in the ticket.
Example:
$ ruby -v
ruby 2.6.0dev (2018-02-22 trunk 62529) [x86_64-linux]
$ ruby --jit -v
ruby 2.6.0dev (2018-02-22 trunk 62529) +JIT [x86_64-linux]
After --jit is made default in the future, this output may be removed.
So do not rely on this output if possible.
[Feature #14462]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62530 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* mjit.c (convert_unit_to_func): separate a function call from a
macro, which evaluates the argument multiple times.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62499 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* mjit.c (check_tmpdir): W_OK and S_ISDIR may not defined on
Windows.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62493 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* mjit.c (system_tmpdir): prefer `$TMPDIR` and `$TMP` over system
defulat temporary directory, if exists, writable, and safe.
[ruby-core:85651] [Bug #14496]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62492 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* Makefile.in, common.mk, win32/Makefile.sub: moved MJIT macros to
mjit_config.h from XCFLAGS.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62488 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* mjit.c (compile_c_to_so): pass pch file only when using
"-include-pch" option.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62469 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* mjit.c (compile_c_to_so): place DLDFLAGS at last, as compilers
other than cl.exee don't care the order of flag arguments,
usually.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62465 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* mjit.c (form_args): do not use va_copy, which cannot detect
appropriate way to simulate when cross compiling.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62463 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
k0kubun
kazu
nobu
normal
usa
ko1
shyouhei
naruse