when TracePoint is enabled. We're cancelling JIT-ed code execution AFTER
each instruction, but there is no guard before the first insn of method.
To prevent spoiling performance, I don't want to modify the JIT-ed code
to fix this. So this commit replaces `mjit_enabled` check with `mjit_call_p`
check.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63734 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It can be used to get the parameters' information of method and block.
There was no way to get block parameters.
It was possible but ineffective to get method parameters via Method
object: `tp.defined_class.method(tp.method_id).parameters`
TracePoint#parameters allows us to get the information easily.
[Feature #14694]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63562 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
st_table allows the use of st_shift to act as an order-preserving
queue while allowing fast lookups to prevent duplicate jobs.
In typical Ruby apps, this table will only have one entry
for gc_finalize_deferred_register.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63451 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This field has been taking up space for 5 years and never used.
Save 8kb of memory on x86-64 for now. If we ever care about
this flag, we'll simply re-add it.
* vm_trace.c (rb_postponed_job_struct): remove flags
(postponed_job_register): comment out flags assignment
[ruby-core:87052] [Misc #14764]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63450 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
which has been developed by Takashi Kokubun <takashikkbn@gmail> as
YARV-MJIT. Many of its bugs are fixed by wanabe <s.wanabe@gmail.com>.
This JIT compiler is designed to be a safe migration path to introduce
JIT compiler to MRI. So this commit does not include any bytecode
changes or dynamic instruction modifications, which are done in original
MJIT.
This commit even strips off some aggressive optimizations from
YARV-MJIT, and thus it's slower than YARV-MJIT too. But it's still
fairly faster than Ruby 2.5 in some benchmarks (attached below).
Note that this JIT compiler passes `make test`, `make test-all`, `make
test-spec` without JIT, and even with JIT. Not only it's perfectly safe
with JIT disabled because it does not replace VM instructions unlike
MJIT, but also with JIT enabled it stably runs Ruby applications
including Rails applications.
I'm expecting this version as just "initial" JIT compiler. I have many
optimization ideas which are skipped for initial merging, and you may
easily replace this JIT compiler with a faster one by just replacing
mjit_compile.c. `mjit_compile` interface is designed for the purpose.
common.mk: update dependencies for mjit_compile.c.
internal.h: declare `rb_vm_insn_addr2insn` for MJIT.
vm.c: exclude some definitions if `-DMJIT_HEADER` is provided to
compiler. This avoids to include some functions which take a long time
to compile, e.g. vm_exec_core. Some of the purpose is achieved in
transform_mjit_header.rb (see `IGNORED_FUNCTIONS`) but others are
manually resolved for now. Load mjit_helper.h for MJIT header.
mjit_helper.h: New. This is a file used only by JIT-ed code. I'll
refactor `mjit_call_cfunc` later.
vm_eval.c: add some #ifdef switches to skip compiling some functions
like Init_vm_eval.
win32/mkexports.rb: export thread/ec functions, which are used by MJIT.
include/ruby/defines.h: add MJIT_FUNC_EXPORTED macro alis to clarify
that a function is exported only for MJIT.
array.c: export a function used by MJIT.
bignum.c: ditto.
class.c: ditto.
compile.c: ditto.
error.c: ditto.
gc.c: ditto.
hash.c: ditto.
iseq.c: ditto.
numeric.c: ditto.
object.c: ditto.
proc.c: ditto.
re.c: ditto.
st.c: ditto.
string.c: ditto.
thread.c: ditto.
variable.c: ditto.
vm_backtrace.c: ditto.
vm_insnhelper.c: ditto.
vm_method.c: ditto.
I would like to improve maintainability of function exports, but I
believe this way is acceptable as initial merging if we clarify the
new exports are for MJIT (so that we can use them as TODO list to fix)
and add unit tests to detect unresolved symbols.
I'll add unit tests of JIT compilations in succeeding commits.
Author: Takashi Kokubun <takashikkbn@gmail.com>
Contributor: wanabe <s.wanabe@gmail.com>
Part of [Feature #14235]
---
* Known issues
* Code generated by gcc is faster than clang. The benchmark may be worse
in macOS. Following benchmark result is provided by gcc w/ Linux.
* Performance is decreased when Google Chrome is running
* JIT can work on MinGW, but it doesn't improve performance at least
in short running benchmark.
* Currently it doesn't perform well with Rails. We'll try to fix this
before release.
---
* Benchmark reslts
Benchmarked with:
Intel 4.0GHz i7-4790K with 16GB memory under x86-64 Ubuntu 8 Cores
- 2.0.0-p0: Ruby 2.0.0-p0
- r62186: Ruby trunk (early 2.6.0), before MJIT changes
- JIT off: On this commit, but without `--jit` option
- JIT on: On this commit, and with `--jit` option
** Optcarrot fps
Benchmark: https://github.com/mame/optcarrot
| |2.0.0-p0 |r62186 |JIT off |JIT on |
|:--------|:--------|:--------|:--------|:--------|
|fps |37.32 |51.46 |51.31 |58.88 |
|vs 2.0.0 |1.00x |1.38x |1.37x |1.58x |
** MJIT benchmarks
Benchmark: https://github.com/benchmark-driver/mjit-benchmarks
(Original: https://github.com/vnmakarov/ruby/tree/rtl_mjit_branch/MJIT-benchmarks)
| |2.0.0-p0 |r62186 |JIT off |JIT on |
|:----------|:--------|:--------|:--------|:--------|
|aread |1.00 |1.09 |1.07 |2.19 |
|aref |1.00 |1.13 |1.11 |2.22 |
|aset |1.00 |1.50 |1.45 |2.64 |
|awrite |1.00 |1.17 |1.13 |2.20 |
|call |1.00 |1.29 |1.26 |2.02 |
|const2 |1.00 |1.10 |1.10 |2.19 |
|const |1.00 |1.11 |1.10 |2.19 |
|fannk |1.00 |1.04 |1.02 |1.00 |
|fib |1.00 |1.32 |1.31 |1.84 |
|ivread |1.00 |1.13 |1.12 |2.43 |
|ivwrite |1.00 |1.23 |1.21 |2.40 |
|mandelbrot |1.00 |1.13 |1.16 |1.28 |
|meteor |1.00 |2.97 |2.92 |3.17 |
|nbody |1.00 |1.17 |1.15 |1.49 |
|nest-ntimes|1.00 |1.22 |1.20 |1.39 |
|nest-while |1.00 |1.10 |1.10 |1.37 |
|norm |1.00 |1.18 |1.16 |1.24 |
|nsvb |1.00 |1.16 |1.16 |1.17 |
|red-black |1.00 |1.02 |0.99 |1.12 |
|sieve |1.00 |1.30 |1.28 |1.62 |
|trees |1.00 |1.14 |1.13 |1.19 |
|while |1.00 |1.12 |1.11 |2.41 |
** Discourse's script/bench.rb
Benchmark: https://github.com/discourse/discourse/blob/v1.8.7/script/bench.rb
NOTE: Rails performance was somehow a little degraded with JIT for now.
We should fix this.
(At least I know opt_aref is performing badly in JIT and I have an idea
to fix it. Please wait for the fix.)
*** JIT off
Your Results: (note for timings- percentile is first, duration is second in millisecs)
categories_admin:
50: 17
75: 18
90: 22
99: 29
home_admin:
50: 21
75: 21
90: 27
99: 40
topic_admin:
50: 17
75: 18
90: 22
99: 32
categories:
50: 35
75: 41
90: 43
99: 77
home:
50: 39
75: 46
90: 49
99: 95
topic:
50: 46
75: 52
90: 56
99: 101
*** JIT on
Your Results: (note for timings- percentile is first, duration is second in millisecs)
categories_admin:
50: 19
75: 21
90: 25
99: 33
home_admin:
50: 24
75: 26
90: 30
99: 35
topic_admin:
50: 19
75: 20
90: 25
99: 30
categories:
50: 40
75: 44
90: 48
99: 76
home:
50: 42
75: 48
90: 51
99: 89
topic:
50: 49
75: 55
90: 58
99: 99
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62197 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm.c: introduce `ruby_vm_event_enabled_flags` which represents which
event flags are enabled before.
* vm_trace.c: do not turn off `trace_` prefix instructions because turn on
overhead is a matter if a program repeats turn on and turn off frequently.
* iseq.c (finish_iseq_build): respect `ruby_vm_event_enabled_flags`.
* vm_insnhelper.c (vm_trace): check `ruby_vm_event_flags` and disable
lazy trace-off technique (do not disable traces).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61122 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c (get_event_id): remove experimental in past, and not supported
now feature.
* vm_trace.c (tracepoint_inspect): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61044 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c (rb_suppress_tracing): remove duplicate flag
`tracing`, which equals to `ec->trace_arg != NULL`. and that
`ec->trace_arg` points `dummy_trace_arg` means it was NULL at
the beginning.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60962 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_iseq_t::aux): add `trace_events` which represents
which events are enabled on this iseq. With this information,
we can skip useless trace-on changes for ISeqs.
* vm_trace.c (RUBY_EVENTS_TRACE_BY_ISEQ): moved to iseq.h and rename it
with ISEQ_TRACE_EVENTS.
* iseq.h: introduce ISEQ_USE_COMPILE_DATA iseq (imemo) flag to represent
COMPILE_DATA is available. In other words, iseq->aux.trace_events is not
available when this flag is set.
* ISEQ_COMPILE_DATA() is changed from a macro.
* ISEQ_COMPILE_DATA_ALLOC() is added.
* ISEQ_COMPILE_DATA_CLEAR() is added.
* iseq.c: use them.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60838 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c (rb_exec_event_hooks): we don't need to use goto statement.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60822 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c (update_global_event_hook): set only when tracing is added.
If tracing was off (event flags are decreased), then ignore them.
Next `trace_` prefix instruction will trace off itself (lazy tracing off).
* vm_insnhelper.c (vm_trace): trace-off for when trace is not needed.
* iseq.c (rb_iseq_trace_set): fix trace-off process (it was never off tracing).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60817 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c: before this patch, deleted hooks are remvoed at
*the beggining* of hooks (exec_hooks_precheck).
This patch cleanup deleted hooks at
(1) just after hook is deleted (TracePoint#disable and so on)
(2) just after executing hooks (exec_hooks_postcheck)
Most of time (1) is enough, but if some threads running hooks,
we need to wait cleaning up deleted hooks until threads finish
running the hooks. This is why (2) is introduced (and this is
why current impl cleanup deleted hooks at the beggining of hooks).
* test/lib/tracepointchecker.rb: check also the number of delete
waiting hooks.
* cont.c (cont_restore_thread): fix VM->trace_running count.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60782 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_thread_t): remove rb_thread_t::event_hooks.
* vm_trace.c: all hooks are connected to vm->event_hooks and
add rb_event_hook_t::filter::th to filter invoke thread.
It will simplify invoking hooks code.
* thread.c (thread_start_func_2): clear thread specific trace_func.
* test/ruby/test_settracefunc.rb: add a test for Thread#add_trace_func.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60776 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c (update_global_event_hook): rewrite ISeqs only when
effective events are changed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60765 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* tool/instruction.rb: create `trace_` prefix instructions.
* compile.c (ADD_TRACE): do not add `trace` instructions but add
TRACE link elements. TRACE elements will be unified with a next
instruction as instruction information.
* vm_trace.c (update_global_event_hook): modify all ISeqs when
hooks are enabled.
* iseq.c (rb_iseq_trace_set): added to toggle `trace_` instructions.
* vm_insnhelper.c (vm_trace): added.
This function is a body of `trace_` prefix instructions.
* vm_insnhelper.h (JUMP): save PC to a control frame.
* insns.def (trace): removed.
* vm_exec.h (INSN_ENTRY_SIG): add debug output (disabled).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60763 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c (rb_postponed_job_t): remove `th` field because it is not used.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60678 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c (rb_threadptr_exec_event_hooks_orig): prepare local variables
`th` and `vm` instead of using rb_ec_... functions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60674 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm.c (rb_thread_method_id_and_class): rename to
rb_ec_frame_method_id_and_class() and accepts `ec` instead of `th`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60513 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
[ci skip]
`TracePoint` doesn't have the `line` method.
Therefore, this example will raise `NoMethodError`.
But since it does not seem to be the intended error, use the existing `lineno`
method instead.
Patch by: yuuji.yaginuma <yuuji.yaginuma@gmail.com>
https://github.com/ruby/ruby/pull/1731
[Fix GH-1731]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60500 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to represent execution context [Feature #14038]
* vm_core.h (rb_thread_t): rb_thread_t::ec is now a pointer.
There are many code using `th` to represent execution context
(such as cfp, VM stack and so on). To access `ec`, they need to
use `th->ec->...` (adding one indirection) so that we need to
replace them by passing `ec` instead of `th`.
* vm_core.h (GET_EC()): introduced to access current ec. Also
remove `ruby_current_thread` global variable.
* cont.c (rb_context_t): introduce rb_context_t::thread_ptr instead of
rb_context_t::thread_value.
* cont.c (ec_set_vm_stack): added to update vm_stack explicitly.
* cont.c (ec_switch): added to switch ec explicitly.
* cont.c (rb_fiber_close): added to terminate fibers explicitly.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60440 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* array.c (rb_to_array_type): make public to share common code
internally.
* hash.c (rb_to_hash_type): make public to share common code
internally.
* symbol.c (rb_to_symbol_type): make public to share common code
internally.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60438 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_thread_ptr): added to replace GetThreadPtr() macro.
* thread.c (in some functions: use "target_th" instead of "th" to make clear
that it is not a current thread.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59192 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_thread_t): move several fields which are copied at cont.c
to rb_execution_context_t.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59177 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_thread_t::tag_state): move to "rb_vm_tag::state".
Lifetime of "state" should be same as current tag.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59159 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
k0kubun
mame
normal
kazu
ko1
nobu
svn
marcandre
a_matsuda