All kind of AST nodes use same struct RNode, which has u1, u2, u3 union members
for holding different kind of data.
This has two problems.
1. Low flexibility of data structure
Some nodes, for example NODE_TRUE, don’t use u1, u2, u3. On the other hand,
NODE_OP_ASGN2 needs more than three union members. However they use same
structure definition, need to allocate three union members for NODE_TRUE and
need to separate NODE_OP_ASGN2 into another node.
This change removes the restriction so make it possible to
change data structure by each node type.
2. No compile time check for union member access
It’s developer’s responsibility for using correct member for each node type when it’s union.
This change clarifies which node has which type of fields and enables compile time check.
This commit also changes node_buffer_elem_struct buf management to handle
different size data with alignment.
It seems not-uncommon for methods to have no IV, ISE, or ICVARC caches.
Calling malloc with 0 will actually allocate something, so if there
aren't any caches (`ISEQ_IS_SIZE(body) == 0`), then we can avoid
allocating memory by not calling malloc. If there are no caches, then
theoretically nobody should be reading from the buffer anyway.
This saves about 1MB on Lobsters benchmark.
There's a missing write barrier for operands in the iseq instruction
list, which can cause crashes.
It can be reproduced when Ruby is compiled with `-DRUBY_DEBUG_ENV=1`.
Using the following command:
```
RUBY_GC_HEAP_OLDOBJECT_LIMIT_FACTOR=0 RUBY_DEBUG=gc_stress ruby -w --disable=gems -Itool/lib -W0 test.rb
```
The following script crashes:
```
require "test/unit"
```
* Add a compile_context arg to yp_compile_node
The compile_context will allow us to pass around the parser, and
the constants and lookup table (to be used in future commits).
* Compile yp_program_node_t and yp_statements_node_t
Add the compilation for program and statements node so that we can
successfully compile an empty program with YARP.
* Helper functions for parsing numbers, strings, and symbols
* Compile basic numeric / boolean node types in YARP
* Compile StringNode and SymbolNodes in YARP
* Compile several basic node types in YARP
* Added error return for missing node
* Add yarp/yarp_compiler.c as stencil for compiling YARP
This commit adds yarp/yarp_compiler.c, and changes the sync script
to ensure that yarp/yarp_compiler.c will not get overwritten
* [Misc #119772] Create and expose RubyVM::InstructionSequence.compile_yarp
This commit creates the stencil for a compile_yarp function, which
we will continue to fill out. It allows us to check the output
of compiled YARP code against compiled code without using YARP.
After a0f12a0258 NODE_GASGN and
NODE_GVAR hold same value on both nd_vid and nd_entry.
This commit stops setting value to nd_entry and makes to use only
nd_vid.
98637d421d changes the name of
the function. However this function is exported as global,
then change the name to origin one for keeping compatibility.
This commit introduces a new instruction `opt_newarray_send` which is
used when there is an array literal followed by either the `hash`,
`min`, or `max` method.
```
[a, b, c].hash
```
Will emit an `opt_newarray_send` instruction. This instruction falls
back to a method call if the "interested" method has been monkey
patched.
Here are some examples of the instructions generated:
```
$ ./miniruby --dump=insns -e '[@a, @b].max'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,12)> (catch: FALSE)
0000 getinstancevariable :@a, <is:0> ( 1)[Li]
0003 getinstancevariable :@b, <is:1>
0006 opt_newarray_send 2, :max
0009 leave
$ ./miniruby --dump=insns -e '[@a, @b].min'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,12)> (catch: FALSE)
0000 getinstancevariable :@a, <is:0> ( 1)[Li]
0003 getinstancevariable :@b, <is:1>
0006 opt_newarray_send 2, :min
0009 leave
$ ./miniruby --dump=insns -e '[@a, @b].hash'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,13)> (catch: FALSE)
0000 getinstancevariable :@a, <is:0> ( 1)[Li]
0003 getinstancevariable :@b, <is:1>
0006 opt_newarray_send 2, :hash
0009 leave
```
[Feature #18897] [ruby-core:109147]
Co-authored-by: John Hawthorn <jhawthorn@github.com>
The `catch_except_p` flag is used for communicating between parent and
child iseq's that a throw instruction was emitted. So for example if a
child iseq has a throw in it and the parent wants to catch the throw, we
use this flag to communicate to the parent iseq that a throw instruction
was emitted.
This flag is only useful at compile time, it only impacts the
compilation process so it seems to be fine to move it from the iseq body
to the compile_data struct.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
If the iseq only contains `opt_invokebuiltin_delegate_leave` insn and
the builtin-function (bf) is inline-able, the caller doesn't need to
build a method frame.
`vm_call_single_noarg_inline_builtin` is fast path for such cases.
`builtin_inline_index` is restored because THEN clause on
`Primitive.mandatory_only?` was compiled twice.
However, f29c9d6d36 skips to compile THEN clause so we don't
need to restore `builtin_inline_index`.
On `f(*a, **kw)` method calls, a rest keyword parameter is identically
same Hash object is passed and it should make `#dup`ed Hahs.
fix https://bugs.ruby-lang.org/issues/19526
This is a variation of the `defined` instruction, for use when we
are checking for an instance variable. Splitting this out as a
separate instruction lets us skip some checks, and it also allows
us to use an instance variable cache, letting shape analysis
speed up the operation further.
If the previous instruction is not a leaf instruction, then the PC was
incremented before the instruction was ran (meaning the currently
executing instruction is actually the previous instruction), so we
should not increment the PC otherwise we will calculate the source
line for the next instruction.
This bug can be reproduced in the following script:
```
require "objspace"
ObjectSpace.trace_object_allocations_start
a =
1.0 / 0.0
p [ObjectSpace.allocation_sourceline(a), ObjectSpace.allocation_sourcefile(a)]
```
Which outputs: [4, "test.rb"]
This is incorrect because the object was allocated on line 10 and not
line 4. The behaviour is correct when we use a leaf instruction (e.g.
if we replaced `1.0 / 0.0` with `"hello"`), then the output is:
[10, "test.rb"].
[Bug #19456]
It doesn't have the right write barriers in place. For example, there is
rb_mark_set(dump->global_buffer.obj_table);
in the mark function, but there is no corresponding write barrier when
adding to the table in the
`ibf_dump_object() -> ibf_table_find_or_insert() -> st_insert()` code path.
To insert write barrier correctly, we need to store the T_STRUCT VALUE
inside `struct ibf_dump`. Instead of doing that, let's just demote it
to WB unproected for correctness. These dumper object are ephemeral so
there is not a huge benefit for having them WB protected.
Users of the bootsnap gem ran into crashes due to this issue:
https://github.com/Shopify/bootsnap/issues/436
Fixes [Bug #19419]
The interrupt check will unintentionally release the VM lock when loading an iseq.
And this will cause issues with the `debug` gem's
[`ObjectSpace.each_iseq` method](0fcfc28aca/ext/debug/iseq_collector.c (L61-L67)),
which wraps iseqs with a wrapper and exposes their internal states when they're actually not ready to be used.
And when that happens, errors like this would occur and kill the `debug` gem's thread:
```
DEBUGGER: ReaderThreadError: uninitialized InstructionSequence
┃ DEBUGGER: Disconnected.
┃ ["/opt/rubies/ruby-3.2.0/lib/ruby/gems/3.2.0/gems/debug-1.7.1/lib/debug/breakpoint.rb:247:in `absolute_path'",
┃ "/opt/rubies/ruby-3.2.0/lib/ruby/gems/3.2.0/gems/debug-1.7.1/lib/debug/breakpoint.rb:247:in `block in iterate_iseq'",
┃ "/opt/rubies/ruby-3.2.0/lib/ruby/gems/3.2.0/gems/debug-1.7.1/lib/debug/breakpoint.rb:246:in `each_iseq'",
...
```
A way to reproduce the issue is to satisfy these conditions at the same time:
1. `debug` gem calling `ObjectSpace.each_iseq` (e.g. [activating a `LineBreakpoint`](0fcfc28aca/lib/debug/breakpoint.rb (L246))).
2. A large amount of iseq being loaded from another thread (possibly through the `bootsnap` gem).
3. 1 and 2 iterating through the same iseq(s) at the same time.
Because this issue requires external dependencies and a rather complicated timing setup to reproduce, I wasn't able to write a test case for it.
But here's some pseudo code to help reproduce it:
```rb
require "debug/session"
Thread.new do
100.times do
ObjectSpace.each_iseq do |iseq|
iseq.absolute_path
end
end
end
sleep 0.1
load_a_bunch_of_iseq
possibly_through_bootsnap
```
[Bug #19348]
Co-authored-by: Peter Zhu <peter@peterzhu.ca>
With this change, we're storing the iv name on an inline cache on
setinstancevariable instructions. This allows us to check the inline
cache to count instance variables set in initialize and give us an
estimate of iv capacity for an object.
For the purpose of estimating the number of instance variables required
for an object, we're assuming that all initialize methods will call
`super`.
This change allows us to estimate the number of instance variables
required without disassembling instruction sequences.
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
This was introduced by b609bdeb53
to suppress warnings. However these warngins were deleted by
beae6cbf0f. Therefore these codes
are not needed anymore.
`throw TAG_BREAK` instruction makes a jump only if the continuation of
catch of TAG_BREAK exactly matches the instruction immediately following
the "send" instruction that is currently being executed. Otherwise, it
seems to determine break from proc-closure.
Branch coverage may insert some recording instructions after "send"
instruction, which broke the conditions for TAG_BREAK to work properly.
This change forces to set the continuation of catch of TAG_BREAK
immediately after "send" (or "invokesuper") instruction.
[Bug #18991]
This patch pushes dummy frames when loading code for the
profiling purpose.
The following methods push a dummy frame:
* `Kernel#require`
* `Kernel#load`
* `RubyVM::InstructionSequence.compile_file`
* `RubyVM::InstructionSequence.load_from_binary`
https://bugs.ruby-lang.org/issues/18559
Object Shapes is used for accessing instance variables and representing the
"frozenness" of objects. Object instances have a "shape" and the shape
represents some attributes of the object (currently which instance variables are
set and the "frozenness"). Shapes form a tree data structure, and when a new
instance variable is set on an object, that object "transitions" to a new shape
in the shape tree. Each shape has an ID that is used for caching. The shape
structure is independent of class, so objects of different types can have the
same shape.
For example:
```ruby
class Foo
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
class Bar
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
foo = Foo.new # `foo` has shape id 2
bar = Bar.new # `bar` has shape id 2
```
Both `foo` and `bar` instances have the same shape because they both set
instance variables of the same name in the same order.
This technique can help to improve inline cache hits as well as generate more
efficient machine code in JIT compilers.
This commit also adds some methods for debugging shapes on objects. See
`RubyVM::Shape` for more details.
For more context on Object Shapes, see [Feature: #18776]
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Co-Authored-By: Eileen M. Uchitelle <eileencodes@gmail.com>
Co-Authored-By: John Hawthorn <john@hawthorn.email>
Tabs were expanded because the file did not have any tab indentation in unedited lines.
Please update your editor config, and use misc/expand_tabs.rb in the pre-commit hook.
Object Shapes is used for accessing instance variables and representing the
"frozenness" of objects. Object instances have a "shape" and the shape
represents some attributes of the object (currently which instance variables are
set and the "frozenness"). Shapes form a tree data structure, and when a new
instance variable is set on an object, that object "transitions" to a new shape
in the shape tree. Each shape has an ID that is used for caching. The shape
structure is independent of class, so objects of different types can have the
same shape.
For example:
```ruby
class Foo
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
class Bar
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
foo = Foo.new # `foo` has shape id 2
bar = Bar.new # `bar` has shape id 2
```
Both `foo` and `bar` instances have the same shape because they both set
instance variables of the same name in the same order.
This technique can help to improve inline cache hits as well as generate more
efficient machine code in JIT compilers.
This commit also adds some methods for debugging shapes on objects. See
`RubyVM::Shape` for more details.
For more context on Object Shapes, see [Feature: #18776]
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Co-Authored-By: Eileen M. Uchitelle <eileencodes@gmail.com>
Co-Authored-By: John Hawthorn <john@hawthorn.email>
As of fbaac837cf, when we were performing
a safe call (`o&.x=`) with a conditional assign (`||= 1`) and discarding
the result the stack would end up in a bad state due to a missing pop.
This commit fixes that by adjusting the target label of the branchnil to
be before a pop in that case (as was previously done in the
non-conditional assignment case).
A common pattern when the block is an explicit parameter is to branch
based on the block parameter instead of using `block_given?`, for
example `block.call if block`.
This commit checks in the peephole optimizer for that case and uses the
getblockparamproxy optimization, which avoids allocating a proc for
simple cases, whenever a getblockparam instruction is followed
immediately by branchif or branchunless.
./miniruby --dump=insns -e 'def foo(&block); 123 if block; end'
== disasm: #<ISeq:foo@-e:1 (1,0)-(1,34)> (catch: FALSE)
local table (size: 1, argc: 0 [opts: 0, rest: -1, post: 0, block: 0, kw: -1@-1, kwrest: -1])
[ 1] block@0<Block>
0000 getblockparamproxy block@0, 0 ( 1)[LiCa]
0003 branchunless 8
0005 putobject 123
0007 leave [Re]
0008 putnil
0009 leave [Re]
Tabs were expanded because the file did not have any tab indentation in unedited lines.
Please update your editor config, and use misc/expand_tabs.rb in the pre-commit hook.
Previously YARV bytecode implemented constant caching by having a pair
of instructions, opt_getinlinecache and opt_setinlinecache, wrapping a
series of getconstant calls (with putobject providing supporting
arguments).
This commit replaces that pattern with a new instruction,
opt_getconstant_path, handling both getting/setting the inline cache and
fetching the constant on a cache miss.
This is implemented by storing the full constant path as a
null-terminated array of IDs inside of the IC structure. idNULL is used
to signal an absolute constant reference.
$ ./miniruby --dump=insns -e '::Foo::Bar::Baz'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,13)> (catch: FALSE)
0000 opt_getconstant_path <ic:0 ::Foo::Bar::Baz> ( 1)[Li]
0002 leave
The motivation for this is that we had increasingly found the need to
disassemble the instructions between the opt_getinlinecache and
opt_setinlinecache in order to determine the constant we are fetching,
or otherwise store metadata.
This disassembly was done:
* In opt_setinlinecache, to register the IC against the constant names
it is using for granular invalidation.
* In rb_iseq_free, to unregister the IC from the invalidation table.
* In YJIT to find the position of a opt_getinlinecache instruction to
invalidate it when the cache is populated
* In YJIT to register the constant names being used for invalidation.
With this change we no longe need disassemly for these (in fact
rb_iseq_each is now unused), as the list of constant names being
referenced is held in the IC. This should also make it possible to make
more optimizations in the future.
This may also reduce the size of iseqs, as previously each segment
required 32 bytes (on 64-bit platforms) for each constant segment. This
implementation only stores one ID per-segment.
There should be no significant performance change between this and the
previous implementation. Previously opt_getinlinecache was a "leaf"
instruction, but it included a jump (almost always to a separate cache
line). Now opt_getconstant_path is a non-leaf (it may
raise/autoload/call const_missing) but it does not jump. These seem to
even out.
catch_excep_t is a field that exists for MJIT. In the process of
rewriting MJIT in Ruby, I added API to convert 1/0 of _Bool to
true/false, and it seemed confusing and hard to maintain if you
don't use _Bool for *_p fields.
There's no point in making a copy of an array just to expand it. Saves
an unnecessary array allocation in the multiple assignment case, with
a 35-84% improvement in affected cases in benchmark/masgn.yml.
This optimizes unbalanced multiple assignment cases such as:
```ruby
a.b, c.d = e, f, g
a.b, c.d, e.f = g, h
```
Previously, this would use:
```
newarray(3)
expandarray(2, 0)
newarray(2)
expandarray(3, 0)
```
These would both allocate arrays. This switches to opt_reverse
with either pop or putnil:
```
pop
opt_reverse(2)
putnil
opt_reverse(3)
```
This avoids an unnecessary array allocation, and results in a 35-76%
performance increase in these types of unbalanced cases (tested with
benchmark/masgn.yml).
This renames the reverse instruction to opt_reverse, since now it
is only added by the optimizer. Then it uses as a more general
form of swap. This optimizes multiple assignment in the popped
case with more than two elements.
An optimization for multiple assignment in the popped case to avoid
array allocation was lost in my fix to make multiple assignment follow
left-to-right evaluation (50c54d40a8).
Before, in the two element case, swap was used. Afterward, newarray(2)
and expandarray(2, 0) were used, which is the same as swap, with the
addition of an unnecessary allocation.
Because this issue is not specific to multiple assignment, and the
multiple assignment code is complex enough as it is, this updates
the peephole optimizer to do the newarray(2)/expandarray(2, 0) -> swap
conversion.
A more general optimization pass for
newarray(X)/expandarray(X, 0) -> reverse(X) will follow, but that
requires readding the reverse instruction.
rb_ary_tmp_new suggests that the array is temporary in some way, but
that's not true, it just creates an array that's hidden and not on the
transient heap. This commit renames it to rb_ary_hidden_new.
The RARRAY_LITERAL_FLAG was added in commit
5871ecf956 to improve CoW performance for
array literals by not keeping track of reference counts.
This commit reverts that commit and has an alternate implementation that
is more generic for all frozen arrays. Since frozen arrays cannot be
modified, we don't need to set the RARRAY_SHARED_ROOT_FLAG and we don't
need to do reference counting.
Array created as literals during iseq compilation don't need a
reference count since they can never be modified. The previous
implementation would mutate the hidden array's reference count,
causing copy-on-write invalidation.
This commit adds a RARRAY_LITERAL_FLAG for arrays created through
rb_ary_literal_new. Arrays created with this flag do not have reference
count stored and just assume they have infinite number of references.
Co-authored-by: Jean Boussier <jean.boussier@gmail.com>
At that commit, I fixed a wrong conditional expression that was always
true. However, that seemed to have caused a regression. [Bug #18906]
This change removes the condition to make the code always enabled.
It had been enabled until that commit, albeit unintentionally, and even
if it is enabled it only consumes a tiny bit of memory, so I believe it
is harmless. [Bug #18906]
We need to dump relative offsets for inline storage entries so that
loading iseqs as an array works as well. This commit also has some
minor refactoring to make computing relative ISE information easier.
This should fix the iseq dump / load as array tests we're seeing fail in
CI.
Co-Authored-By: John Hawthorn <john@hawthorn.email>
ISeqs loaded from binary were breaking because the storage partition
calculation had bugs in it. Specifically it couldn't take in to account
the case when inline storage was overallocated (for example when we
allocate inline storage for an instruction but peephole optimization
eliminates that instruction).
`RUBY_ISEQ_DUMP_DEBUG=to_binary make test-all` would break, and this
patch fixes it
This commit adds a bitfield to the iseq body that stores offsets inside
the iseq buffer that contain values we need to mark. We can use this
bitfield to mark objects instead of disassembling the instructions.
This commit also groups inline storage entries and adds a counter for
each entry. This allows us to iterate and mark each entry without
disassembling instructions
Since we have a bitfield and grouped inline caches, we can mark all
VALUE objects associated with instructions without actually
disassembling the instructions at mark time.
[Feature #18875] [ruby-core:109042]
... because insns_info_index could not be zero here. Also it adds an
invariant check for that.
This change will prevent the following warning of GCC 12.1
http://rubyci.s3.amazonaws.com/arch/ruby-master/log/20220613T000004Z.log.html.gz
```
compile.c:2230:39: warning: array subscript 2147483647 is outside array bounds of ‘struct iseq_insn_info_entry[2147483647]’ [-Warray-bounds]
2230 | insns_info[insns_info_index-1].line_no != adjust->line_no) {
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~
```
Use ISEQ_BODY macro to get the rb_iseq_constant_body of the ISeq. Using
this macro will make it easier for us to change the allocation strategy
of rb_iseq_constant_body when using Variable Width Allocation.
Previously, the right hand side was always evaluated before the
left hand side for constant assignments. For the following:
```ruby
lhs::C = rhs
```
rhs was evaluated before lhs, which is inconsistant with attribute
assignment (lhs.m = rhs), and apparently also does not conform to
JIS 3017:2013 11.4.2.2.3.
Fix this by changing evaluation order. Previously, the above
compiled to:
```
0000 putself ( 1)[Li]
0001 opt_send_without_block <calldata!mid:rhs, argc:0, FCALL|VCALL|ARGS_SIMPLE>
0003 dup
0004 putself
0005 opt_send_without_block <calldata!mid:lhs, argc:0, FCALL|VCALL|ARGS_SIMPLE>
0007 setconstant :C
0009 leave
```
After this change:
```
0000 putself ( 1)[Li]
0001 opt_send_without_block <calldata!mid:lhs, argc:0, FCALL|VCALL|ARGS_SIMPLE>
0003 putself
0004 opt_send_without_block <calldata!mid:rhs, argc:0, FCALL|VCALL|ARGS_SIMPLE>
0006 swap
0007 topn 1
0009 swap
0010 setconstant :C
0012 leave
```
Note that if expr is not a module/class, then a TypeError is not
raised until after the evaluation of rhs. This is because that
error is raised by setconstant. If we wanted to raise TypeError
before evaluation of rhs, we would have to add a VM instruction
for calling vm_check_if_namespace.
Changing assignment order for single assignments caused problems
in the multiple assignment code, revealing that the issue also
affected multiple assignment. Fix the multiple assignment code
so left-to-right evaluation also works for constant assignments.
Do some refactoring of the multiple assignment code to reduce
duplication after adding support for constants. Rename struct
masgn_attrasgn to masgn_lhs_node, since it now handles both
constants and attributes. Add add_masgn_lhs_node static function
for adding data for lhs attribute and constant setting.
Fixes [Bug #15928]
This `NODE` type was used in pre-YARV implementation, to improve
the performance of assignment to dynamic local variable defined at
the innermost scope. It has no longer any actual difference with
`NODE_DASGN`, except for the node dump.
* Use duparray when possible for argspush
ARGSPUSH is the node we see with a single value pushed to the end of a
splatted array. ARGSCAT is similar, but is used when multiple values are
being concatenated to the list.
Previously only ARGSCAT had an optimization where when all the values
were static it would use duparray instead of newarray to create the
intermediate array.
This commit adds similar behaviour for ARGSPUSH, using duparray instead
of putobject/newarray.
* Replace duparray with putobject before concatarray
When performing duparray/concatarray we know we'll never use the
intermediate array being created by duparray, so we should be able to
use it as a temporary object.
This avoids an extra array allocation for NODE_ARGSPUSH (ex. [*foo, 1])
and NODE_ARGSCAT (ex. [*foo, 1, 2]).
Dumped iseq binary can not have unnamed symbols/IDs, and ID 0 is
stored instead. As `struct rb_id_table` disallows ID 0, also for
the distinction, re-assign a new temporary ID based on the local
variable table index when loading from the binary, as well as the
parser.
The implementation of a local variable tables was represented as `ID*`,
but it was very hacky: the first element is not an ID but the size of
the table, and, the last element is (sometimes) a link to the next local
table only when the id tables are a linked list.
This change converts the hacky implementation to a normal struct.
This provides a significant speedup for symbol, true, false,
nil, and 0-9, class/module, and a small speedup in most other cases.
Speedups (using included benchmarks):
:symbol :: 60%
0-9 :: 50%
Class/Module :: 50%
nil/true/false :: 20%
integer :: 10%
[] :: 10%
"" :: 3%
One reason this approach is faster is it reduces the number of
VM instructions for each interpolated value.
Initial idea, approach, and benchmarks from Eric Wong. I applied
the same approach against the master branch, updating it to handle
the significant internal changes since this was first proposed 4
years ago (such as CALL_INFO/CALL_CACHE -> CALL_DATA). I also
expanded it to optimize true/false/nil/0-9/class/module, and added
handling of missing methods, refined methods, and RUBY_DEBUG.
This renames the tostring insn to anytostring, and adds an
objtostring insn that implements the optimization. This requires
making a few functions non-static, and adding some non-static
functions.
This disables 4 YJIT tests. Those tests should be reenabled after
YJIT optimizes the new objtostring insn.
Implements [Feature #13715]
Co-authored-by: Eric Wong <e@80x24.org>
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
Co-authored-by: Yusuke Endoh <mame@ruby-lang.org>
Co-authored-by: Koichi Sasada <ko1@atdot.net>
Compare with the C methods, A built-in methods written in Ruby is
slower if only mandatory parameters are given because it needs to
check the argumens and fill default values for optional and keyword
parameters (C methods can check the number of parameters with `argc`,
so there are no overhead). Passing mandatory arguments are common
(optional arguments are exceptional, in many cases) so it is important
to provide the fast path for such common cases.
`Primitive.mandatory_only?` is a special builtin function used with
`if` expression like that:
```ruby
def self.at(time, subsec = false, unit = :microsecond, in: nil)
if Primitive.mandatory_only?
Primitive.time_s_at1(time)
else
Primitive.time_s_at(time, subsec, unit, Primitive.arg!(:in))
end
end
```
and it makes two ISeq,
```
def self.at(time, subsec = false, unit = :microsecond, in: nil)
Primitive.time_s_at(time, subsec, unit, Primitive.arg!(:in))
end
def self.at(time)
Primitive.time_s_at1(time)
end
```
and (2) is pointed by (1). Note that `Primitive.mandatory_only?`
should be used only in a condition of an `if` statement and the
`if` statement should be equal to the methdo body (you can not
put any expression before and after the `if` statement).
A method entry with `mandatory_only?` (`Time.at` on the above case)
is marked as `iseq_overload`. When the method will be dispatch only
with mandatory arguments (`Time.at(0)` for example), make another
method entry with ISeq (2) as mandatory only method entry and it
will be cached in an inline method cache.
The idea is similar discussed in https://bugs.ruby-lang.org/issues/16254
but it only checks mandatory parameters or more, because many cases
only mandatory parameters are given. If we find other cases (optional
or keyword parameters are used frequently and it hurts performance),
we can extend the feature.
`RubyVM.keep_script_lines` enables to keep script lines
for each ISeq and AST. This feature is for debugger/REPL
support.
```ruby
RubyVM.keep_script_lines = true
RubyVM::keep_script_lines = true
eval("def foo = nil\ndef bar = nil")
pp RubyVM::InstructionSequence.of(method(:foo)).script_lines
```
Since opt_getinlinecache and opt_setinlinecache point to the same cache
struct, there is no need to track the index of the get instruction and
then store it on the cache struct later when processing the set
instruction. Setting it when processing the get instruction works just
as well.
This change reduces our diff.
Make sure `opt_getinlinecache` is in a block all on its own, and
invalidate it from the interpreter when `opt_setinlinecache`.
It will recompile with a filled cache the second time around.
This lets YJIT runs well when the IC for constant is cold.
Insert generated addresses into st_table for mapping native code
addresses back to info about VM instructions. Export `encoded_insn_data`
to do this. Also some style fixes.
This commit dumps the outer variables table when dumping an iseq to
binary. This fixes a case where Ractors aren't able to tell what outer
variables belong to a lambda after the lambda is loaded via ISeq.load_from_binary
[Bug #18232] [ruby-core:105504]
yui-knk
Kevin Newton
Aaron Patterson
Nobuyoshi Nakada
Peter Zhu
Yusuke Endoh
Samuel Williams
Jemma Issroff
Takashi Kokubun
Koichi Sasada
git
eileencodes
Ole Friis Østergaard
John Bampton
Jean Boussier
Alan Wu
Matt Valentine-House
Stan Lo
Shugo Maeda
S-H-GAMELINKS
John Hawthorn
HParker
Maple Ong
Jeremy Evans
Aaron Patterson
Noah Gibbs
Maxime Chevalier-Boisvert
卜部昌平