This commit removes T_PAYLOAD since the new VWA implementation no longer
requires T_PAYLOAD types.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
This commit removes T_PAYLOAD since the new VWA implementation no longer
requires T_PAYLOAD types.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
[0] => [0, *, a]
#=> [0] length mismatch (given 1, expected 2+) (NoMatchingPatternError)
Ignore test failures of typeprof caused by this change for now.
Though this call to `rb_check_type` is just to raise an exception
and never return actually, it can return at least formally. That
means a caller function looks like it will access `flags` even in
the special-const cases, and some optimizers may unify the access
with the same access just following the call, and re-order it
before the guard.
* bitwise operation between different enumeration types
('ruby_value_type' and 'ruby_fl_type') is deprecated
[-Wdeprecated-enum-enum-conversion]
* volatile-qualified parameter type 'volatile int' is deprecated
[-Wdeprecated-volatile]
This declaration was added at commit 0ee5a49dd4
without its implementation. Must be a mistake.
Note also that we ended up having this exct same functionality
implemented under a name of rb_check_id().
Redo of 34a2acdac788602c14bf05fb616215187badd504 and
931138b00696419945dc03e10f033b1f53cd50f3 which were reverted.
GitHub PR #4340.
This change implements a cache for class variables. Previously there was
no cache for cvars. Cvar access is slow due to needing to travel all the
way up th ancestor tree before returning the cvar value. The deeper the
ancestor tree the slower cvar access will be.
The benefits of the cache are more visible with a higher number of
included modules due to the way Ruby looks up class variables. The
benchmark here includes 26 modules and shows with the cache, this branch
is 6.5x faster when accessing class variables.
```
compare-ruby: ruby 3.1.0dev (2021-03-15T06:22:34Z master 9e5105c) [x86_64-darwin19]
built-ruby: ruby 3.1.0dev (2021-03-15T12:12:44Z add-cache-for-clas.. c6be009) [x86_64-darwin19]
| |compare-ruby|built-ruby|
|:--------|-----------:|---------:|
|vm_cvar | 5.681M| 36.980M|
| | -| 6.51x|
```
Benchmark.ips calling `ActiveRecord::Base.logger` from within a Rails
application. ActiveRecord::Base.logger has 71 ancestors. The more
ancestors a tree has, the more clear the speed increase. IE if Base had
only one ancestor we'd see no improvement. This benchmark is run on a
vanilla Rails application.
Benchmark code:
```ruby
require "benchmark/ips"
require_relative "config/environment"
Benchmark.ips do |x|
x.report "logger" do
ActiveRecord::Base.logger
end
end
```
Ruby 3.0 master / Rails 6.1:
```
Warming up --------------------------------------
logger 155.251k i/100ms
Calculating -------------------------------------
```
Ruby 3.0 with cvar cache / Rails 6.1:
```
Warming up --------------------------------------
logger 1.546M i/100ms
Calculating -------------------------------------
logger 14.857M (± 4.8%) i/s - 74.198M in 5.006202s
```
Lastly we ran a benchmark to demonstate the difference between master
and our cache when the number of modules increases. This benchmark
measures 1 ancestor, 30 ancestors, and 100 ancestors.
Ruby 3.0 master:
```
Warming up --------------------------------------
1 module 1.231M i/100ms
30 modules 432.020k i/100ms
100 modules 145.399k i/100ms
Calculating -------------------------------------
1 module 12.210M (± 2.1%) i/s - 61.553M in 5.043400s
30 modules 4.354M (± 2.7%) i/s - 22.033M in 5.063839s
100 modules 1.434M (± 2.9%) i/s - 7.270M in 5.072531s
Comparison:
1 module: 12209958.3 i/s
30 modules: 4354217.8 i/s - 2.80x (± 0.00) slower
100 modules: 1434447.3 i/s - 8.51x (± 0.00) slower
```
Ruby 3.0 with cvar cache:
```
Warming up --------------------------------------
1 module 1.641M i/100ms
30 modules 1.655M i/100ms
100 modules 1.620M i/100ms
Calculating -------------------------------------
1 module 16.279M (± 3.8%) i/s - 82.038M in 5.046923s
30 modules 15.891M (± 3.9%) i/s - 79.459M in 5.007958s
100 modules 16.087M (± 3.6%) i/s - 81.005M in 5.041931s
Comparison:
1 module: 16279458.0 i/s
100 modules: 16087484.6 i/s - same-ish: difference falls within error
30 modules: 15891406.2 i/s - same-ish: difference falls within error
```
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
This change implements a cache for class variables. Previously there was
no cache for cvars. Cvar access is slow due to needing to travel all the
way up th ancestor tree before returning the cvar value. The deeper the
ancestor tree the slower cvar access will be.
The benefits of the cache are more visible with a higher number of
included modules due to the way Ruby looks up class variables. The
benchmark here includes 26 modules and shows with the cache, this branch
is 6.5x faster when accessing class variables.
```
compare-ruby: ruby 3.1.0dev (2021-03-15T06:22:34Z master 9e5105ca45) [x86_64-darwin19]
built-ruby: ruby 3.1.0dev (2021-03-15T12:12:44Z add-cache-for-clas.. c6be0093ae) [x86_64-darwin19]
| |compare-ruby|built-ruby|
|:--------|-----------:|---------:|
|vm_cvar | 5.681M| 36.980M|
| | -| 6.51x|
```
Benchmark.ips calling `ActiveRecord::Base.logger` from within a Rails
application. ActiveRecord::Base.logger has 71 ancestors. The more
ancestors a tree has, the more clear the speed increase. IE if Base had
only one ancestor we'd see no improvement. This benchmark is run on a
vanilla Rails application.
Benchmark code:
```ruby
require "benchmark/ips"
require_relative "config/environment"
Benchmark.ips do |x|
x.report "logger" do
ActiveRecord::Base.logger
end
end
```
Ruby 3.0 master / Rails 6.1:
```
Warming up --------------------------------------
logger 155.251k i/100ms
Calculating -------------------------------------
```
Ruby 3.0 with cvar cache / Rails 6.1:
```
Warming up --------------------------------------
logger 1.546M i/100ms
Calculating -------------------------------------
logger 14.857M (± 4.8%) i/s - 74.198M in 5.006202s
```
Lastly we ran a benchmark to demonstate the difference between master
and our cache when the number of modules increases. This benchmark
measures 1 ancestor, 30 ancestors, and 100 ancestors.
Ruby 3.0 master:
```
Warming up --------------------------------------
1 module 1.231M i/100ms
30 modules 432.020k i/100ms
100 modules 145.399k i/100ms
Calculating -------------------------------------
1 module 12.210M (± 2.1%) i/s - 61.553M in 5.043400s
30 modules 4.354M (± 2.7%) i/s - 22.033M in 5.063839s
100 modules 1.434M (± 2.9%) i/s - 7.270M in 5.072531s
Comparison:
1 module: 12209958.3 i/s
30 modules: 4354217.8 i/s - 2.80x (± 0.00) slower
100 modules: 1434447.3 i/s - 8.51x (± 0.00) slower
```
Ruby 3.0 with cvar cache:
```
Warming up --------------------------------------
1 module 1.641M i/100ms
30 modules 1.655M i/100ms
100 modules 1.620M i/100ms
Calculating -------------------------------------
1 module 16.279M (± 3.8%) i/s - 82.038M in 5.046923s
30 modules 15.891M (± 3.9%) i/s - 79.459M in 5.007958s
100 modules 16.087M (± 3.6%) i/s - 81.005M in 5.041931s
Comparison:
1 module: 16279458.0 i/s
100 modules: 16087484.6 i/s - same-ish: difference falls within error
30 modules: 15891406.2 i/s - same-ish: difference falls within error
```
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
* See [Feature #17752]
* Defining explicitly to 0 seems the best solution, see https://github.com/ruby/ruby/pull/4428
* For example:
./include/ruby/internal/has/builtin.h:49:33: error: "RBIMPL_HAS_BUILTIN___builtin_assume" is not defined, evaluates to 0 [-Werror=undef]
49 | # define RBIMPL_HAS_BUILTIN(_) (RBIMPL_HAS_BUILTIN_ ## _)
| ^~~~~~~~~~~~~~~~~~~
./include/ruby/internal/assume.h:75:7: note: in expansion of macro ‘RBIMPL_HAS_BUILTIN’
75 | #elif RBIMPL_HAS_BUILTIN(__builtin_assume)
| ^~~~~~~~~~~~~~~~~~
This is just a hoax. Nobody have ever implemented a function named as
such. Also the functionality implied by the name must not be a public
API if any.
Previous code failed to compile on MSVC. Log:
https://github.com/ruby/ruby/pull/4371/checks?check_run_id=2304484466
This is possibly due to the fact that:
1. `Data_Wrap_Struct(...)` appears in a source code
2. which expands to `rb_data_object_wrap(...)`
3. which expands to `RUBY_MACRO_SELECT(rb_data_object_wrap_, RUBY_UNTYPED_DATA_WARNING)`
4. which expands to `rb_data_object_wrap_0`
5. which expands to `rb_data_object_wrap`, so far so good, but
6. this is a recursive macro expansion (see step 2). Everybody stops expanding...
- in step 4 for MSVC, and
- in step 5 for GCC etc.
I have no idea why but this proposed changeset prevents MSVC from
stopping at step 4.
Nobuyoshi Nakada
Peter Zhu
Kazuki Tsujimoto
卜部昌平
Benoit Daloze
xtkoba
Samuel Williams
Yusuke Endoh
eileencodes
Aaron Patterson
Matt Valentine-House
Ryuta Kamizono