In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
1fd9573d8b
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
`rb_thread_t` contained `native_thread_data_t` to represent
thread implementation dependent data. This patch separates
them and rename it `rb_native_thread` and point it from
`rb_thraed_t`.
Now, 1 Ruby thread (`rb_thread_t`) has 1 native thread (`rb_native_thread`).
Not sure if this is the correct fix. It does raise LocalJumpError in
the yielding thread as you would expect, but the value yielded to the calling
thread is still yielded without an exception.
Fixes [Bug #18649]
Check whether the current or previous frame is a Ruby frame in
call_trace_func and rb_tracearg_binding before attempting to
create a binding for the frame.
Fixes [Bug #18487]
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
Before the new constant cache behavior, caches were invalidated by a
single global variable. You could inspect the value of this variable
with RubyVM.stat(:global_constant_state). This was mostly useful to
verify the behavior of the VM or to test constant loading like in Rails.
With the new constant cache behavior, we introduced
RubyVM.stat(:constant_cache) which returned a hash with symbol keys and
integer values that represented the number of live constant caches
associated with the given symbol. Additionally, we removed the old
RubyVM.stat(:global_constant_state).
This was proven to be not very useful, so it doesn't help you diagnose
constant loading issues. So, instead we added the global constant state
back into the RubyVM output. However, that number can be misleading as
now when you invalidate something like `Foo::Bar::Baz` you're actually
invalidating 3 different lists of inline caches.
This commit attempts to get the best of both worlds. We remove
RubyVM.stat(:global_constant_state) like we did originally, as it
doesn't have the same semantic meaning and it could be confusing going
forward. Instead we add RubyVM.stat(:constant_cache_invalidations) and
RubyVM.stat(:constant_cache_misses). These two metrics should provide
enough information to diagnose any constant loading issues, as well as
provide a replacement for the old global constant state.
This was removed as part of [Feature #18589]. But some applications were relying on this behavior. So bringing this back to make it better for backward compatibility going forward.
This commit reintroduces finer-grained constant cache invalidation.
After 8008fb7 got merged, it was causing issues on token-threaded
builds (such as on Windows).
The issue was that when you're iterating through instruction sequences
and using the translator functions to get back the instruction structs,
you're either using `rb_vm_insn_null_translator` or
`rb_vm_insn_addr2insn2` depending if it's a direct-threading build.
`rb_vm_insn_addr2insn2` does some normalization to always return to
you the non-trace version of whatever instruction you're looking at.
`rb_vm_insn_null_translator` does not do that normalization.
This means that when you're looping through the instructions if you're
trying to do an opcode comparison, it can change depending on the type
of threading that you're using. This can be very confusing. So, this
commit creates a new translator function
`rb_vm_insn_normalizing_translator` to always return the non-trace
version so that opcode comparisons don't have to worry about different
configurations.
[Feature #18589]
This reverts commits for [Feature #18589]:
* 8008fb7352
"Update formatting per feedback"
* 8f6eaca2e1
"Delete ID from constant cache table if it becomes empty on ISEQ free"
* 629908586b
"Finer-grained inline constant cache invalidation"
MSWin builds on AppVeyor have been crashing since the merger.
Check whether the current or previous frame is a Ruby frame in
call_trace_func before attempting to create a binding for the frame.
Fixes [Bug #18487]
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
Current behavior - caches depend on a global counter. All constant mutations cause caches to be invalidated.
```ruby
class A
B = 1
end
def foo
A::B # inline cache depends on global counter
end
foo # populate inline cache
foo # hit inline cache
C = 1 # global counter increments, all caches are invalidated
foo # misses inline cache due to `C = 1`
```
Proposed behavior - caches depend on name components. Only constant mutations with corresponding names will invalidate the cache.
```ruby
class A
B = 1
end
def foo
A::B # inline cache depends constants named "A" and "B"
end
foo # populate inline cache
foo # hit inline cache
C = 1 # caches that depend on the name "C" are invalidated
foo # hits inline cache because IC only depends on "A" and "B"
```
Examples of breaking the new cache:
```ruby
module C
# Breaks `foo` cache because "A" constant is set and the cache in foo depends
# on "A" and "B"
class A; end
end
B = 1
```
We expect the new cache scheme to be invalidated less often because names aren't frequently reused. With the cache being invalidated less, we can rely on its stability more to keep our constant references fast and reduce the need to throw away generated code in YJIT.
Use ISEQ_BODY macro to get the rb_iseq_constant_body of the ISeq. Using
this macro will make it easier for us to change the allocation strategy
of rb_iseq_constant_body when using Variable Width Allocation.
the original rb_wasm_setjmp implementation always unwinds to the root
call frame to have setjmp compatible interface, and simulate sjlj's
undefined behavior. Therefore, every vm_exec call unwinds to main, and
a deep call stack makes setjmp call very expensive. The following
snippet from optcarrot takes 5s even though it takes less than 0.3s on
native.
```
[0x0, 0x4, 0x8, 0xc].map do |attr|
(0..7).map do |j|
(0...0x10000).map do |i|
clr = i[15 - j] * 2 + i[7 - j]
clr != 0 ? attr | clr : 0
end
end
end
```
This patch adds a WASI specialized vm_exec which uses lightweight
try-catch API without unwinding to the root frame. After this patch, the
above snippet takes only 0.5s.
Currently the calculation only counts the size of the struct. This commit adds the size of the associated st tables, id tables, and linked lists.
Still missing is the size of the ractors and (potentially) the size of the object space.
`overloaded_cme_table` keeps cme -> monly_cme pairs to manage
corresponding `monly_cme` for `cme`. The lifetime of the `monly_cme`
should be longer than `monly_cme`, but the previous patch losts the
reference to the living `monly_cme`.
Now `overloaded_cme_table` values are always root (keys are only weak
reference), it means `monly_cme` does not freed until corresponding
`cme` is invalidated.
To make managing easy, move `overloaded_cme_table` to `rb_vm_t`.
Previously when redefining an alias of a BOP, we would unnecessarily
invalidate the bop. For example:
class String
alias len length
private :len
end
This commit avoids this by checking that the called_id on the method
entry matches the original_id on the definition.
* Lazily create singletons on instance_{exec,eval}
Previously when instance_exec or instance_eval was called on an object,
that object would be given a singleton class so that method
definitions inside the block would be added to the object rather than
its class.
This commit aims to improve performance by delaying the creation of the
singleton class unless/until one is needed for method definition. Most
of the time instance_eval is used without any method definition.
This was implemented by adding a flag to the cref indicating that it
represents a singleton of the object rather than a class itself. In this
case CREF_CLASS returns the object's existing class, but in cases that
we are defining a method (either via definemethod or
VM_SPECIAL_OBJECT_CBASE which is used for undef and alias).
This also happens to fix what I believe is a bug. Previously
instance_eval behaved differently with regards to constant access for
true/false/nil than for all other objects. I don't think this was
intentional.
String::Foo = "foo"
"".instance_eval("Foo") # => "foo"
Integer::Foo = "foo"
123.instance_eval("Foo") # => "foo"
TrueClass::Foo = "foo"
true.instance_eval("Foo") # NameError: uninitialized constant Foo
This also slightly changes the error message when trying to define a method
through instance_eval on an object which can't have a singleton class.
Before:
$ ruby -e '123.instance_eval { def foo; end }'
-e:1:in `block in <main>': no class/module to add method (TypeError)
After:
$ ./ruby -e '123.instance_eval { def foo; end }'
-e:1:in `block in <main>': can't define singleton (TypeError)
IMO this error is a small improvement on the original and better matches
the (both old and new) message when definging a method using `def self.`
$ ruby -e '123.instance_eval{ def self.foo; end }'
-e:1:in `block in <main>': can't define singleton (TypeError)
Co-authored-by: Matthew Draper <matthew@trebex.net>
* Remove "under" argument from yield_under
* Move CREF_SINGLETON_SET into vm_cref_new
* Simplify vm_get_const_base
* Fix leaf VM_SPECIAL_OBJECT_CONST_BASE
Co-authored-by: Matthew Draper <matthew@trebex.net>
The main impetus for this change is to fix [Bug #13392]. Previously, we
fired the "return" TracePoint event after popping the stack frame for
the block running as method (BMETHOD). This gave undesirable source
location outputs as the return event normally fires right before the
frame going away.
The iseq for each block can run both as a block and as a method. To
accommodate that, this commit makes vm_trace() fire call/return events for
instructions that have b_call/b_return events attached when the iseq is
running as a BMETHOD. The logic for rewriting to "trace_*" instruction
is tweaked so that when the user listens to call/return events,
instructions with b_call/b_return become trace variants.
To continue to provide the return value for non-local returns done using
the "return" or "break" keyword inside BMETHODs, the stack unwinding
code is tweaked. b_return events now provide the same return value as
return events for these non-local cases. A pre-existing test deemed not
providing a return value for these b_return events as a limitation.
This commit removes the checks for call/return TracePoint events that
happen when calling into BMETHODs when no TracePoints are active.
Technically, migrating just the return event is enough to fix the bug,
but migrating both call and return removes our reliance on
`VM_FRAME_FLAG_FINISH` and re-entering the interpreter when the caller
is already in the interpreter.
The implementation of a local variable tables was represented as `ID*`,
but it was very hacky: the first element is not an ID but the size of
the table, and, the last element is (sometimes) a link to the next local
table only when the id tables are a linked list.
This change converts the hacky implementation to a normal struct.
As the ID serial is 32bit value and internal IDs created in the
parser are assigned from its maximum value, Symbol converted from
it will exceed 32bit and overflow on 32bit platforms.
Refinement#import_methods imports methods from modules.
Unlike Module#include, it copies methods and adds them into the refinement,
so the refinement is activated in the imported methods.
[Bug #17429] [ruby-core:101639]
`RubyVM.keep_script_lines` enables to keep script lines
for each ISeq and AST. This feature is for debugger/REPL
support.
```ruby
RubyVM.keep_script_lines = true
RubyVM::keep_script_lines = true
eval("def foo = nil\ndef bar = nil")
pp RubyVM::InstructionSequence.of(method(:foo)).script_lines
```
The interpreter instruction count was enabled based on RUBY_DEBUG as
opposed to YJIT_STATS. In builds with YJIT_STATS=1 but RUBY_DEBUG=0,
the count was not available.
Move YJIT_STATS in yjit.h where declarations are expoed to code outside
of YJIT. Also reduce the changes made to the interpreter for calling
into YJIT's instruction counting function.
Alan Wu
Koichi Sasada
Jeremy Evans
Kevin Newton
Nobuyoshi Nakada
Peter Zhu
Yuta Saito
Kazuhiro NISHIYAMA
Sutou Kouhei
Takashi Kokubun
John Hawthorn
Alan Wu
Yusuke Endoh
Shugo Maeda
Noah Gibbs
Jose Narvaez
Maxime Chevalier-Boisvert
Aaron Patterson