The operands in each instruction needs to be pinned because if
auto-compaction runs in iseq_set_sequence, then the objects could exist
on the generated_iseq buffer, which would not be reference updated which
can lead to T_MOVED (and subsequently T_NONE) objects on the iseq.
The `catch_except_p` flag is used for communicating between parent and
child iseq's that a throw instruction was emitted. So for example if a
child iseq has a throw in it and the parent wants to catch the throw, we
use this flag to communicate to the parent iseq that a throw instruction
was emitted.
This flag is only useful at compile time, it only impacts the
compilation process so it seems to be fine to move it from the iseq body
to the compile_data struct.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Previously YARV bytecode implemented constant caching by having a pair
of instructions, opt_getinlinecache and opt_setinlinecache, wrapping a
series of getconstant calls (with putobject providing supporting
arguments).
This commit replaces that pattern with a new instruction,
opt_getconstant_path, handling both getting/setting the inline cache and
fetching the constant on a cache miss.
This is implemented by storing the full constant path as a
null-terminated array of IDs inside of the IC structure. idNULL is used
to signal an absolute constant reference.
$ ./miniruby --dump=insns -e '::Foo::Bar::Baz'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,13)> (catch: FALSE)
0000 opt_getconstant_path <ic:0 ::Foo::Bar::Baz> ( 1)[Li]
0002 leave
The motivation for this is that we had increasingly found the need to
disassemble the instructions between the opt_getinlinecache and
opt_setinlinecache in order to determine the constant we are fetching,
or otherwise store metadata.
This disassembly was done:
* In opt_setinlinecache, to register the IC against the constant names
it is using for granular invalidation.
* In rb_iseq_free, to unregister the IC from the invalidation table.
* In YJIT to find the position of a opt_getinlinecache instruction to
invalidate it when the cache is populated
* In YJIT to register the constant names being used for invalidation.
With this change we no longe need disassemly for these (in fact
rb_iseq_each is now unused), as the list of constant names being
referenced is held in the IC. This should also make it possible to make
more optimizations in the future.
This may also reduce the size of iseqs, as previously each segment
required 32 bytes (on 64-bit platforms) for each constant segment. This
implementation only stores one ID per-segment.
There should be no significant performance change between this and the
previous implementation. Previously opt_getinlinecache was a "leaf"
instruction, but it included a jump (almost always to a separate cache
line). Now opt_getconstant_path is a non-leaf (it may
raise/autoload/call const_missing) but it does not jump. These seem to
even out.
The masking is not only unnecessary but works only when the masking
value is a power of 2. Also suppress unary minus operator to unsigned
type warnings.
We need to dump relative offsets for inline storage entries so that
loading iseqs as an array works as well. This commit also has some
minor refactoring to make computing relative ISE information easier.
This should fix the iseq dump / load as array tests we're seeing fail in
CI.
Co-Authored-By: John Hawthorn <john@hawthorn.email>
This commit adds a bitfield to the iseq body that stores offsets inside
the iseq buffer that contain values we need to mark. We can use this
bitfield to mark objects instead of disassembling the instructions.
This commit also groups inline storage entries and adds a counter for
each entry. This allows us to iterate and mark each entry without
disassembling instructions
Since we have a bitfield and grouped inline caches, we can mark all
VALUE objects associated with instructions without actually
disassembling the instructions at mark time.
[Feature #18875] [ruby-core:109042]
This commit reintroduces finer-grained constant cache invalidation.
After 8008fb7 got merged, it was causing issues on token-threaded
builds (such as on Windows).
The issue was that when you're iterating through instruction sequences
and using the translator functions to get back the instruction structs,
you're either using `rb_vm_insn_null_translator` or
`rb_vm_insn_addr2insn2` depending if it's a direct-threading build.
`rb_vm_insn_addr2insn2` does some normalization to always return to
you the non-trace version of whatever instruction you're looking at.
`rb_vm_insn_null_translator` does not do that normalization.
This means that when you're looping through the instructions if you're
trying to do an opcode comparison, it can change depending on the type
of threading that you're using. This can be very confusing. So, this
commit creates a new translator function
`rb_vm_insn_normalizing_translator` to always return the non-trace
version so that opcode comparisons don't have to worry about different
configurations.
[Feature #18589]
This reverts commits for [Feature #18589]:
* 8008fb7352
"Update formatting per feedback"
* 8f6eaca2e1
"Delete ID from constant cache table if it becomes empty on ISEQ free"
* 629908586b
"Finer-grained inline constant cache invalidation"
MSWin builds on AppVeyor have been crashing since the merger.
Current behavior - caches depend on a global counter. All constant mutations cause caches to be invalidated.
```ruby
class A
B = 1
end
def foo
A::B # inline cache depends on global counter
end
foo # populate inline cache
foo # hit inline cache
C = 1 # global counter increments, all caches are invalidated
foo # misses inline cache due to `C = 1`
```
Proposed behavior - caches depend on name components. Only constant mutations with corresponding names will invalidate the cache.
```ruby
class A
B = 1
end
def foo
A::B # inline cache depends constants named "A" and "B"
end
foo # populate inline cache
foo # hit inline cache
C = 1 # caches that depend on the name "C" are invalidated
foo # hits inline cache because IC only depends on "A" and "B"
```
Examples of breaking the new cache:
```ruby
module C
# Breaks `foo` cache because "A" constant is set and the cache in foo depends
# on "A" and "B"
class A; end
end
B = 1
```
We expect the new cache scheme to be invalidated less often because names aren't frequently reused. With the cache being invalidated less, we can rely on its stability more to keep our constant references fast and reduce the need to throw away generated code in YJIT.
Use ISEQ_BODY macro to get the rb_iseq_constant_body of the ISeq. Using
this macro will make it easier for us to change the allocation strategy
of rb_iseq_constant_body when using Variable Width Allocation.
The main impetus for this change is to fix [Bug #13392]. Previously, we
fired the "return" TracePoint event after popping the stack frame for
the block running as method (BMETHOD). This gave undesirable source
location outputs as the return event normally fires right before the
frame going away.
The iseq for each block can run both as a block and as a method. To
accommodate that, this commit makes vm_trace() fire call/return events for
instructions that have b_call/b_return events attached when the iseq is
running as a BMETHOD. The logic for rewriting to "trace_*" instruction
is tweaked so that when the user listens to call/return events,
instructions with b_call/b_return become trace variants.
To continue to provide the return value for non-local returns done using
the "return" or "break" keyword inside BMETHODs, the stack unwinding
code is tweaked. b_return events now provide the same return value as
return events for these non-local cases. A pre-existing test deemed not
providing a return value for these b_return events as a limitation.
This commit removes the checks for call/return TracePoint events that
happen when calling into BMETHODs when no TracePoints are active.
Technically, migrating just the return event is enough to fix the bug,
but migrating both call and return removes our reliance on
`VM_FRAME_FLAG_FINISH` and re-entering the interpreter when the caller
is already in the interpreter.
Compare with the C methods, A built-in methods written in Ruby is
slower if only mandatory parameters are given because it needs to
check the argumens and fill default values for optional and keyword
parameters (C methods can check the number of parameters with `argc`,
so there are no overhead). Passing mandatory arguments are common
(optional arguments are exceptional, in many cases) so it is important
to provide the fast path for such common cases.
`Primitive.mandatory_only?` is a special builtin function used with
`if` expression like that:
```ruby
def self.at(time, subsec = false, unit = :microsecond, in: nil)
if Primitive.mandatory_only?
Primitive.time_s_at1(time)
else
Primitive.time_s_at(time, subsec, unit, Primitive.arg!(:in))
end
end
```
and it makes two ISeq,
```
def self.at(time, subsec = false, unit = :microsecond, in: nil)
Primitive.time_s_at(time, subsec, unit, Primitive.arg!(:in))
end
def self.at(time)
Primitive.time_s_at1(time)
end
```
and (2) is pointed by (1). Note that `Primitive.mandatory_only?`
should be used only in a condition of an `if` statement and the
`if` statement should be equal to the methdo body (you can not
put any expression before and after the `if` statement).
A method entry with `mandatory_only?` (`Time.at` on the above case)
is marked as `iseq_overload`. When the method will be dispatch only
with mandatory arguments (`Time.at(0)` for example), make another
method entry with ISeq (2) as mandatory only method entry and it
will be cached in an inline method cache.
The idea is similar discussed in https://bugs.ruby-lang.org/issues/16254
but it only checks mandatory parameters or more, because many cases
only mandatory parameters are given. If we find other cases (optional
or keyword parameters are used frequently and it hurts performance),
we can extend the feature.
This updates the trace instructions to directly dispatch to
opt_send_without_block. So this should cause no slowdown in
non-trace mode.
To enable the tracing of the optimized methods, RUBY_EVENT_C_CALL
and RUBY_EVENT_C_RETURN are added as events to the specialized
instructions.
Fixes [Bug #14870]
Co-authored-by: Takashi Kokubun <takashikkbn@gmail.com>
This changes Thread::Location::Backtrace#absolute_path to return
nil for methods/procs defined in eval. If the realpath of an iseq
is nil, that indicates it was defined in eval, in which case you
cannot use RubyVM::AbstractSyntaxTree.of.
Fixes [Bug #16983]
Co-authored-by: Koichi Sasada <ko1@atdot.net>
... then, new_insn_core extracts nd_line(node).
Also, if a macro "EXPERIMENTAL_ISEQ_NODE_ID" is defined, this changeset
keeps nd_node_id(node) for each instruction. This is intended for
TypeProf to identify what AST::Node corresponds to each instruction.
This patch is originally authored by @yui-knk for showing which column a
NoMethodError occurred.
https://github.com/ruby/ruby/compare/master...yui-knk:feature/node_id
Co-Authored-By: Yuichiro Kaneko <yui-knk@ruby-lang.org>
add_ensure_iseq() adds ensure block to the end of
jump such as next/redo/return. However, if the rescue
cause are in the body, this rescue catches the exception
in ensure clause.
iter do
next
rescue
R
ensure
raise
end
In this case, R should not be executed, but executed without this patch.
Fixes [Bug #13930]
Fixes [Bug #16618]
A part of tests are written by @jeremyevans https://github.com/ruby/ruby/pull/4291
According to MSVC manual (*1), cl.exe can skip including a header file
when that:
- contains #pragma once, or
- starts with #ifndef, or
- starts with #if ! defined.
GCC has a similar trick (*2), but it acts more stricter (e. g. there
must be _no tokens_ outside of #ifndef...#endif).
Sun C lacked #pragma once for a looong time. Oracle Developer Studio
12.5 finally implemented it, but we cannot assume such recent version.
This changeset modifies header files so that each of them include
strictly one #ifndef...#endif. I believe this is the most portable way
to trigger compiler optimizations. [Bug #16770]
*1: https://docs.microsoft.com/en-us/cpp/preprocessor/once
*2: https://gcc.gnu.org/onlinedocs/cppinternals/Guard-Macros.html
Now, rb_call_info contains how to call the method with tuple of
(mid, orig_argc, flags, kwarg). Most of cases, kwarg == NULL and
mid+argc+flags only requires 64bits. So this patch packed
rb_call_info to VALUE (1 word) on such cases. If we can not
represent it in VALUE, then use imemo_callinfo which contains
conventional callinfo (rb_callinfo, renamed from rb_call_info).
iseq->body->ci_kw_size is removed because all of callinfo is VALUE
size (packed ci or a pointer to imemo_callinfo).
To access ci information, we need to use these functions:
vm_ci_mid(ci), _flag(ci), _argc(ci), _kwarg(ci).
struct rb_call_info_kw_arg is renamed to rb_callinfo_kwarg.
rb_funcallv_with_cc() and rb_method_basic_definition_p_with_cc()
is temporary removed because cd->ci should be marked.
Saves comitters' daily life by avoid #include-ing everything from
internal.h to make each file do so instead. This would significantly
speed up incremental builds.
We take the following inclusion order in this changeset:
1. "ruby/config.h", where _GNU_SOURCE is defined (must be the very
first thing among everything).
2. RUBY_EXTCONF_H if any.
3. Standard C headers, sorted alphabetically.
4. Other system headers, maybe guarded by #ifdef
5. Everything else, sorted alphabetically.
Exceptions are those win32-related headers, which tend not be self-
containing (headers have inclusion order dependencies).
(This is the second try of 036bc1da6c6c9b0fa9b7f5968d897a9554dd770e.)
If iseq is GC'ed, the pointer of iseq may be reused, which may hide a
deprecation warning of keyword argument change.
http://ci.rvm.jp/results/trunk-test1@phosphorus-docker/2474221
```
1) Failure:
TestKeywordArguments#test_explicit_super_kwsplat [/tmp/ruby/v2/src/trunk-test1/test/ruby/test_keyword.rb:549]:
--- expected
+++ actual
@@ -1 +1 @@
-/The keyword argument is passed as the last hash parameter.* for `m'/m
+""
```
This change ad-hocly adds iseq_unique_id for each iseq, and use it
instead of iseq pointer. This covers the case where caller is GC'ed.
Still, the case where callee is GC'ed, is not covered.
But anyway, it is very rare that iseq is GC'ed. Even when it occurs, it
just hides some warnings. It's no big deal.
These functions are used from within a compilation unit so we can
make them static, for better binary size. This changeset reduces
the size of generated ruby binary from 26,590,128 bytes to
26,584,472 bytes on my macihne.
HParker
Peter Zhu
Koichi Sasada
Takashi Kokubun
eileencodes
Matt Valentine-House
Nobuyoshi Nakada
John Hawthorn
Yusuke Endoh
Aaron Patterson
Kevin Newton
Alan Wu
Jose Narvaez
Maxime Chevalier-Boisvert
Jeremy Evans
卜部昌平