This patch introduces "oneshot_lines" mode for `Coverage.start`, which
checks "whether each line was executed at least once or not", instead of
"how many times each line was executed". A hook for each line is fired
at most once, and after it is fired, the hook flag was removed; it runs
with zero overhead.
See [Feature #15022] in detail.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65195 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The former states explicitly that the argument must be a literal,
and can optimize away `strlen` on all compilers.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65059 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
I assume we always prefix rb_ to non-static functions to avoid conflict.
These functions are not exported and safe to be renamed.
iseq.h: ditto
compile.c: ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64736 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Now it uses encoded_insn_data to identify and replace each encoded insn.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64519 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This enhances rb_vm_insn_addr2insn which retrieves a decoded insn number
from encoded insn.
The insn data table include not only decoded insn number, but also its
len, trace and non-trace version of encoded insn.
This table can be used to simplify trace instrumentation.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64518 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (iseq_init_trace): at ISeq loading time, we need to check
`ruby_vm_event_enabled_flags` to turn on trace instructions.
Seprate this checking code from `finish_iseq_build()` and make
new function. `iseq_ibf_load()` calls this funcation after loading.
* test/ruby/test_iseq.rb: add a test for this fix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64514 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The code fragments that initializes coverage data were scattered into
both parse.y and compile.c. parse.y allocated a coverage data, and
compile.c initialize the data.
To remove this cross-cutting concern, this change moves the allocation
from "coverage" function of parse.y to "rb_iseq_new_top" of iseq.c.
For the sake, parse.y just counts the line number of the original source
code, and the number is passed via rb_ast_body_t.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64508 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
When coverage measurement is enabled, the compiler makes each iseq have
a reference to the counter array of coverage.
Even after coverage measurement is disabled, the reference is kept.
And, if coverage measurement is restarted, a coverage hook will increase
the counter. This is completely meaningless; it brings just overhead.
To remove this meaninglessness, this change removes all the reference
when coverage measuement is stopped.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64504 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This is just a refactoring.
The receiver of "invokesuper" was a boolean to represent if it is ZSUPER
or not. This was used in vm_search_super_method to prohibit ZSUPER call
in define_method. (It is currently prohibited because of the limitation
of the implementation.)
This change removes the hack by introducing an explicit flag,
VM_CALL_SUPER, to signal the information. Now, the implementation of
"invokesuper" is consistent with "send" instruction.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64268 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
when TracePoint is enabled. We're cancelling JIT-ed code execution AFTER
each instruction, but there is no guard before the first insn of method.
To prevent spoiling performance, I don't want to modify the JIT-ed code
to fix this. So this commit replaces `mjit_enabled` check with `mjit_call_p`
check.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63734 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_iseq_insns_info_decode_positions is used only when
VM_INSN_INFO_TABLE_IMPL=2.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63645 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The current VM_INSTRUCTION_SIZE is 198, so the linear search
painful during a major GC phase.
I noticed rb_vm_insn_addr2insn2 showing up at the top of some
profiles while working on some malloc-related stuff, so I
decided to attack it.
Most notably, the benchmark/bm_vm3_gc.rb improves by over 40%:
https://80x24.org/spew/20180602220554.GA9991@whir/raw
[ruby-core:87361] [Feature #14814]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63594 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (get_insn_info_succinct_bitvector): If
VM_CHECK_MODE is 0, `body->insns_info.positions` is
freed in `rb_iseq_insns_info_encode_positions`.
Print `position` only when VM_CHECK_MODE is set.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63468 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c, iseq.c: extract body and param.keyword in iseq as
local variables.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63441 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c: extract body and param.keyword in iseq as local
variables.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63404 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_free): call mjit_free_iseq only if iseq->body is
not NULL too, as the function accesses the body.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63403 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Don't abuse struct RString to hold arbitrary memory region.
Raw pointer should just suffice.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63368 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Currently "trace_opt_send_without_block" (28 letters) is the longest
insn.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63317 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* insns.def (checktype): split branchiftype to checktype and
branchif, to make branch condition negation possible.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63225 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This commit adds write barriers for objects marked from `rb_iseq_mark`.
r62851 introduced direct marking from iseqs to:
* keyword arg default values
* catch table iseqs
* VALUEs embedded in encoded instructions
This patch adds missing write barrier calls to those references.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63147 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (ibf_dump_iseq_each): do not dump succ_index_table
pointer. positions are dumped as integer arrays. pointer
values are meaningless outside the process.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63099 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (ibf_load_iseq_each): manage iseq_size to point loaded
objects in iseq_encoded. now marking iseq scans iseq_encoded
directly.
* test/ruby/test_iseq.rb (test_to_binary_with_objects): skip for
now, but fix argument order of assert_equal.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62856 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We need to mark default values for kwarg methods. This also fixes
Bootsnap. IBF iseq loading needed to mark iseqs as "having markable
objects".
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62851 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
`TRACE_INSN_P` doesn't need to know about encoded iseqs, it just needs
to look at decoded iseqs. We have the decoded iseqs available, so no
reason to look at encoded ones. This change allows us to clear
`original_iseq` from the iseq struct without any segvs (previously,
clearing `original_iseq` would cause the tests to crash).
* iseq.c (rb_iseq_trace_set): Only use decoded iseq with `TRACE_INSN_P`
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62750 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
```
.../ruby/iseq.c: In function ‘rb_vm_insn_null_translator’:
.../ruby/iseq.c:137:12: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
return (int)addr;
^
```
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62709 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Directly marking iseq operands allows us to eliminate the "mark array"
stored on ISEQ objects, which will reduce the amount of memory ISEQ
objects consume. This patch changes the iseq mark function to:
* Directly marks ISEQ operands
* Iterate over and mark child ISEQs
It also introduces two flags on the ISEQ object. In order to mark
instruction operands, we have to disassemble the instructions and find
the instruction parameters and types. Instructions may also be
translated to jump addresses. Instruction sequences may get marked by
the GC *while* they're mid flight (being compiled). The
`ISEQ_TRANSLATED` flag is used to indicate whether or not the
instructions have been translated to jump addresses so that when we
decode the instructions we know whether or not we need to go from jump
location back to original instruction or not.
Not all ISEQ objects have any markable objects embedded in their
instructions. We can detect whether or not an ISEQ has markable objects
in the instructions at compile time. If the instructions contain
markable objects, we set a flag `ISEQ_MARKABLE_ISEQ` on the ISEQ object.
This means that during the mark phase, we can skip decompilation if the
flag is *not* set. In other words, we can avoid decompilation of we
know in advance there is nothing to mark.
`once` instructions have an operand that contains the result of a
one-time compilation of a regex. Before this patch, that operand was
called an "inline cache", even though the struct was actually an "inline
storage". This patch changes the operand to be an "inline storage" so
that we can differentiate between caches that need marking (the inline
storage) and caches that don't need marking (inline cache).
[ruby-core:84909]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62706 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to be used for MJIT's optimization. It's not used for optimization
in this commit yet.
vm_core.h: added catch_except_p field.
iseq.c: show the flag in ISeq disasm for debugging.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62654 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
which has been developed by Takashi Kokubun <takashikkbn@gmail> as
YARV-MJIT. Many of its bugs are fixed by wanabe <s.wanabe@gmail.com>.
This JIT compiler is designed to be a safe migration path to introduce
JIT compiler to MRI. So this commit does not include any bytecode
changes or dynamic instruction modifications, which are done in original
MJIT.
This commit even strips off some aggressive optimizations from
YARV-MJIT, and thus it's slower than YARV-MJIT too. But it's still
fairly faster than Ruby 2.5 in some benchmarks (attached below).
Note that this JIT compiler passes `make test`, `make test-all`, `make
test-spec` without JIT, and even with JIT. Not only it's perfectly safe
with JIT disabled because it does not replace VM instructions unlike
MJIT, but also with JIT enabled it stably runs Ruby applications
including Rails applications.
I'm expecting this version as just "initial" JIT compiler. I have many
optimization ideas which are skipped for initial merging, and you may
easily replace this JIT compiler with a faster one by just replacing
mjit_compile.c. `mjit_compile` interface is designed for the purpose.
common.mk: update dependencies for mjit_compile.c.
internal.h: declare `rb_vm_insn_addr2insn` for MJIT.
vm.c: exclude some definitions if `-DMJIT_HEADER` is provided to
compiler. This avoids to include some functions which take a long time
to compile, e.g. vm_exec_core. Some of the purpose is achieved in
transform_mjit_header.rb (see `IGNORED_FUNCTIONS`) but others are
manually resolved for now. Load mjit_helper.h for MJIT header.
mjit_helper.h: New. This is a file used only by JIT-ed code. I'll
refactor `mjit_call_cfunc` later.
vm_eval.c: add some #ifdef switches to skip compiling some functions
like Init_vm_eval.
win32/mkexports.rb: export thread/ec functions, which are used by MJIT.
include/ruby/defines.h: add MJIT_FUNC_EXPORTED macro alis to clarify
that a function is exported only for MJIT.
array.c: export a function used by MJIT.
bignum.c: ditto.
class.c: ditto.
compile.c: ditto.
error.c: ditto.
gc.c: ditto.
hash.c: ditto.
iseq.c: ditto.
numeric.c: ditto.
object.c: ditto.
proc.c: ditto.
re.c: ditto.
st.c: ditto.
string.c: ditto.
thread.c: ditto.
variable.c: ditto.
vm_backtrace.c: ditto.
vm_insnhelper.c: ditto.
vm_method.c: ditto.
I would like to improve maintainability of function exports, but I
believe this way is acceptable as initial merging if we clarify the
new exports are for MJIT (so that we can use them as TODO list to fix)
and add unit tests to detect unresolved symbols.
I'll add unit tests of JIT compilations in succeeding commits.
Author: Takashi Kokubun <takashikkbn@gmail.com>
Contributor: wanabe <s.wanabe@gmail.com>
Part of [Feature #14235]
---
* Known issues
* Code generated by gcc is faster than clang. The benchmark may be worse
in macOS. Following benchmark result is provided by gcc w/ Linux.
* Performance is decreased when Google Chrome is running
* JIT can work on MinGW, but it doesn't improve performance at least
in short running benchmark.
* Currently it doesn't perform well with Rails. We'll try to fix this
before release.
---
* Benchmark reslts
Benchmarked with:
Intel 4.0GHz i7-4790K with 16GB memory under x86-64 Ubuntu 8 Cores
- 2.0.0-p0: Ruby 2.0.0-p0
- r62186: Ruby trunk (early 2.6.0), before MJIT changes
- JIT off: On this commit, but without `--jit` option
- JIT on: On this commit, and with `--jit` option
** Optcarrot fps
Benchmark: https://github.com/mame/optcarrot
| |2.0.0-p0 |r62186 |JIT off |JIT on |
|:--------|:--------|:--------|:--------|:--------|
|fps |37.32 |51.46 |51.31 |58.88 |
|vs 2.0.0 |1.00x |1.38x |1.37x |1.58x |
** MJIT benchmarks
Benchmark: https://github.com/benchmark-driver/mjit-benchmarks
(Original: https://github.com/vnmakarov/ruby/tree/rtl_mjit_branch/MJIT-benchmarks)
| |2.0.0-p0 |r62186 |JIT off |JIT on |
|:----------|:--------|:--------|:--------|:--------|
|aread |1.00 |1.09 |1.07 |2.19 |
|aref |1.00 |1.13 |1.11 |2.22 |
|aset |1.00 |1.50 |1.45 |2.64 |
|awrite |1.00 |1.17 |1.13 |2.20 |
|call |1.00 |1.29 |1.26 |2.02 |
|const2 |1.00 |1.10 |1.10 |2.19 |
|const |1.00 |1.11 |1.10 |2.19 |
|fannk |1.00 |1.04 |1.02 |1.00 |
|fib |1.00 |1.32 |1.31 |1.84 |
|ivread |1.00 |1.13 |1.12 |2.43 |
|ivwrite |1.00 |1.23 |1.21 |2.40 |
|mandelbrot |1.00 |1.13 |1.16 |1.28 |
|meteor |1.00 |2.97 |2.92 |3.17 |
|nbody |1.00 |1.17 |1.15 |1.49 |
|nest-ntimes|1.00 |1.22 |1.20 |1.39 |
|nest-while |1.00 |1.10 |1.10 |1.37 |
|norm |1.00 |1.18 |1.16 |1.24 |
|nsvb |1.00 |1.16 |1.16 |1.17 |
|red-black |1.00 |1.02 |0.99 |1.12 |
|sieve |1.00 |1.30 |1.28 |1.62 |
|trees |1.00 |1.14 |1.13 |1.19 |
|while |1.00 |1.12 |1.11 |2.41 |
** Discourse's script/bench.rb
Benchmark: https://github.com/discourse/discourse/blob/v1.8.7/script/bench.rb
NOTE: Rails performance was somehow a little degraded with JIT for now.
We should fix this.
(At least I know opt_aref is performing badly in JIT and I have an idea
to fix it. Please wait for the fix.)
*** JIT off
Your Results: (note for timings- percentile is first, duration is second in millisecs)
categories_admin:
50: 17
75: 18
90: 22
99: 29
home_admin:
50: 21
75: 21
90: 27
99: 40
topic_admin:
50: 17
75: 18
90: 22
99: 32
categories:
50: 35
75: 41
90: 43
99: 77
home:
50: 39
75: 46
90: 49
99: 95
topic:
50: 46
75: 52
90: 56
99: 101
*** JIT on
Your Results: (note for timings- percentile is first, duration is second in millisecs)
categories_admin:
50: 19
75: 21
90: 25
99: 33
home_admin:
50: 24
75: 26
90: 30
99: 35
topic_admin:
50: 19
75: 20
90: 25
99: 30
categories:
50: 40
75: 44
90: 48
99: 76
home:
50: 42
75: 48
90: 51
99: 89
topic:
50: 49
75: 55
90: 58
99: 99
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62197 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
that allows to JIT-compile Ruby methods by generating C code and
using C compiler. See the first comment of mjit.c to know what this
file does.
mjit.c is authored by Vladimir Makarov <vmakarov@redhat.com>.
After he invented great method JIT infrastructure for MRI as MJIT,
Lars Kanis <lars@greiz-reinsdorf.de> sent the patch to support MinGW
in MJIT. In addition to merging it, I ported pthread to Windows native
threads. Now this MJIT infrastructure can be compiled on Visual Studio.
This commit simplifies mjit.c to decrease code at initial merge. For
example, this commit does not provide multiple JIT threads support.
We can resurrect them later if we really want them, but I wanted to minimize
diff to make it easier to review this patch.
`/tmp/_mjitXXX` file is renamed to `/tmp/_ruby_mjitXXX` because non-Ruby
developers may not know the name "mjit" and the file name should make
sure it's from Ruby and not from some harmful programs. TODO: it may be
better to store this to some temporary directory which Ruby is already using
by Tempfile, if it's not bad for performance.
mjit.h: New. It has `mjit_exec` interface similar to `vm_exec`, which is
for triggering MJIT. This drops interface for AOT compared to the original
MJIT.
Makefile.in: define macros to let MJIT know the path of MJIT header.
Probably we can refactor this to reduce the number of macros (TODO).
win32/Makefile.sub: ditto.
common.mk: compile mjit.o and mjit_compile.o. Unlike original MJIT, this
commit separates MJIT infrastructure and JIT compiler code as independent
object files. As initial patch is NOT going to have ultra-fast JIT compiler,
it's likely to replace JIT compiler, e.g. original MJIT's compiler or some
future JIT impelementations which are not public now.
inits.c: define MJIT module. This is added because `MJIT.enabled?` was
necessary for testing.
test/lib/zombie_hunter.rb: skip if `MJIT.enabled?`. Obviously this
wouldn't work with current code when JIT is enabled.
test/ruby/test_io.rb: skip this too. This would make no sense with MJIT.
ruby.c: define MJIT CLI options. As major difference from original MJIT,
"-j:l"/"--jit:llvm" are renamed to "--jit-cc" because I want to support
not only gcc/clang but also cl.exe (Visual Studio) in the future. But it
takes only "--jit-cc=gcc", "--jit-cc=clang" for now. And only long "--jit"
options are allowed since some Ruby committers preferred it at Ruby
developers Meeting on January, and some of options are renamed.
This file also triggers to initialize MJIT thread and variables.
eval.c: finalize MJIT worker thread and variables.
test/ruby/test_rubyoptions.rb: fix number of CLI options for --jit.
thread_pthread.c: change for pthread abstraction in MJIT. Prefix rb_ for
functions which are used by other files.
thread_win32.c: ditto, for Windows. Those pthread porting is one of major
works that YARV-MJIT created, which is my fork of MJIT, in Feature 14235.
thread.c: follow rb_ prefix changes
vm.c: trigger MJIT call on VM invocation. Also trigger `mjit_mark` to avoid
SEGV by race between JIT and GC of ISeq. The improvement was provided by
wanabe <s.wanabe@gmail.com>.
In JIT compiler I created and am going to add in my next commit, I found
that having `mjit_exec` after `vm_loop_start:` is harmful because the
JIT-ed function doesn't proceed other ISeqs on RESTORE_REGS of leave insn.
Executing non-FINISH frame is unexpected for my JIT compiler and
`exception_handler` triggers executions of such ISeqs. So `mjit_exec`
here should be executed only when it directly comes from `vm_exec` call.
`RubyVM::MJIT` module and `.enabled?` method is added so that we can skip
some tests which don't expect JIT threads or compiler file descriptors.
vm_insnhelper.h: trigger MJIT on method calls during VM execution.
vm_core.h: add fields required for mjit.c. `bp` must be `cfp[6]` because
rb_control_frame_struct is likely to be casted to another struct. The
last position is the safest place to add the new field.
vm_insnhelper.c: save initial value of cfp->ep as cfp->bp. This is an
optimization which are done in both MJIT and YARV-MJIT. So this change
is added in this commit. Calculating bp from ep is a little heavy work,
so bp is kind of cache for it.
iseq.c: notify ISeq GC to MJIT. We should know which iseq in MJIT queue
is GCed to avoid SEGV. TODO: unload some GCed units in some safe way.
gc.c: add hooks so that MJIT can wait GC, and vice versa. Simultaneous
JIT and GC executions may cause SEGV and so we should synchronize them.
cont.c: save continuation information in MJIT worker. As MJIT shouldn't
unload JIT-ed code which is being used, MJIT wants to know full list of
saved execution contexts for continuation and detect ISeqs in use.
mjit_compile.c: added empty JIT compiler so that you can reuse this commit
to build your own JIT compiler. This commit tries to compile ISeqs but
all of them are considered as not supported in this commit. So you can't
use JIT compiler in this commit yet while we added --jit option now.
Patch author: Vladimir Makarov <vmakarov@redhat.com>.
Contributors:
Takashi Kokubun <takashikkbn@gmail.com>.
wanabe <s.wanabe@gmail.com>.
Lars Kanis <lars@greiz-reinsdorf.de>.
Part of Feature 12589 and 14235.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62189 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (local_var_name): name internal local variables as `?N`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62100 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (iseq_data_to_ary): when OPT_CALL_THREADED_CODE is used,
iseq_encoded is overwritten by instructions with trace and the
original_iseq is not stored. convert these instructions to the
original instructions as external representation.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61890 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Because the name "code_range" is ambiguous with encoding's.
Abbreviations ("crange", and "cr") are also renamed to "loc".
The traditional "code_location" (a pair of lineno and column) is
renamed to "code_position". Abbreviations are also renamed
(first_loc to beg_pos, and last_loc to end_pos).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61721 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
"loc" was ambiguous; it might refer both a location and a code range.
This change uses "loc" for a location, and "crange" or "cr" for a code
range.
A location (abbr. loc) is a point in a program and consists of line
number and column number. A code range (abbr. crange and cr) is a range
within a program and consists of a pair of locations which is the first
and the last.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61690 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
NODE_PRELUDE contains a `BEGIN` node, a main node, and compile_option.
This node is assumed that it must be located immediately under the root
NODE_SCOPE, but this strange assumption is not so good, IMO.
This change removes the assumtion; it integrates the former two nodes by
block_append, and moves compile_option into rb_ast_body_t.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61610 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This commit removes ISEQ_TYPE_DEFINED_GUARD because it is no longer
needed. And this introduces ISEQ_TYPE_PLAIN which means that the iseq
does nothing special but just wrap an expression. Currently, this is
used for once execution: `/foo#{ bar }baz/o`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61601 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It is too error-prone to pass IMEMO_IFUNC object as NODE*.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61592 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Currently, VM_INSN_INFO_TABLE_IMPL == 0 means linear search, and
VM_INSN_INFO_TABLE_IMPL == 1 means binary search. I plan to add
succinct bitvector algorithm later.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61537 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This makes TracePoint a bit fast by reducing cache misses of
`get_insn_info_binary_search`.
Also, I plan to use succinct bitvector algorithm for `get_insn_info`
instead of binary search. This change will make it easy.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61536 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This factors rb_iseq_constant_body#insns_info and #insns_info_size to
struct iseq_insn_info.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61534 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (iseq_inspect): show also code range information.
Note that `iseq_inspect` is used only for header of disasm.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61463 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.h (rb_compile_option_struct): trace instruction is removed so that
remove the trace_instruction compile option.
Don't show warning (just ignore) for Ruby 2.5.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61450 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (iseqw_trace_points): add `RubyVM::InstructionSequence#trace_points`
method for tools which want to manipulate ISeq (and traces).
* test/ruby/test_iseq.rb: add a test for this method.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61427 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (iseqw_each_child): add RubyVM::InstructionSequence#each_child
method for tools which want to manipulate ISeq.
* test/ruby/test_iseq.rb: add a test for this method.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61425 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
My motivation was to improve the output of `ruby --dump=insns xxx.rb`.
When one file has many iseqs, it's hard to find the one I want to read.
So I wanted `iseq_disasm` to show first_lineno. I unified the behavior
of `iseqw_disasm` for consistency.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61423 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_insn_operand_intern): simplified the condition for
local variable names, assume TS_LINDEX and TS_NUM combinations
are only for local variables.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61421 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_insn_operand_intern): show local variable name at
getblockparam/setblockparam too.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61360 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This change introduces get_insn_info_binary_search, which is (should be)
equivalent to the old get_insn_info.
The old get_insn_info is renamed to get_insn_info_linear_search. When
VM_CHECK_MODE > 0, the equivalence is validated at finish_iseq_build.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61353 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2.5's line coverage measurement was about two times slower than 2.4
because of two reasons; (1) vm_trace uses rb_iseq_event_flags (which
takes O(n) currently where n is the length of iseq) to get an event
type, and (2) RUBY_EVENT_LINE uses setjmp to call an event hook.
This change adds a special event for line coverage,
RUBY_EVENT_COVERAGE_LINE, and adds `tracecoverage` instructions where
the event occurs in iseq.
`tracecoverage` instruction calls an event hook without vm_trace.
And, RUBY_EVENT_COVERAGE_LINE is an internal event which does not
use setjmp.
This change also cancells lineno change due to the deletion of trace
instructions [Feature #14104]. So fixes [Bug #14191].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61350 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Before this change, coverage.so had failed to measure some multiple-line
code fragments. This is because removing trace instructions (#14104)
changed TracePoint's lineno (new lineno), and coverage counter array was
based on old lineno.
This change initializes coverage counter array based on new lineno.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61313 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm.c: introduce `ruby_vm_event_enabled_flags` which represents which
event flags are enabled before.
* vm_trace.c: do not turn off `trace_` prefix instructions because turn on
overhead is a matter if a program repeats turn on and turn off frequently.
* iseq.c (finish_iseq_build): respect `ruby_vm_event_enabled_flags`.
* vm_insnhelper.c (vm_trace): check `ruby_vm_event_flags` and disable
lazy trace-off technique (do not disable traces).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61122 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This change makes coverage use the general event type RUBY_EVENT_LINE
instead of a special event type RUBY_EVENT_COVERAGE.
Just a refactoring.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61043 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This change makes each ISeq keep NODE's code range. This information is
needed for method coverage.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61025 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_trace_set): simply return immediately if
ISeq::compile_data is available. Not sure why this state
is allowed, but exception during compile (or `ISeq::load`)
can make such states.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60915 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_trace_set): at this point ISEQ_USE_COMPILE_DATA
should not be set.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60871 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_iseq_t::aux): add `trace_events` which represents
which events are enabled on this iseq. With this information,
we can skip useless trace-on changes for ISeqs.
* vm_trace.c (RUBY_EVENTS_TRACE_BY_ISEQ): moved to iseq.h and rename it
with ISEQ_TRACE_EVENTS.
* iseq.h: introduce ISEQ_USE_COMPILE_DATA iseq (imemo) flag to represent
COMPILE_DATA is available. In other words, iseq->aux.trace_events is not
available when this flag is set.
* ISEQ_COMPILE_DATA() is changed from a macro.
* ISEQ_COMPILE_DATA_ALLOC() is added.
* ISEQ_COMPILE_DATA_CLEAR() is added.
* iseq.c: use them.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60838 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_trace_set): remove a wrong assertion.
This assertion checked `insn` is `trace_` prefix instruction
but threaded code `insn` is original code.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60820 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c (update_global_event_hook): set only when tracing is added.
If tracing was off (event flags are decreased), then ignore them.
Next `trace_` prefix instruction will trace off itself (lazy tracing off).
* vm_insnhelper.c (vm_trace): trace-off for when trace is not needed.
* iseq.c (rb_iseq_trace_set): fix trace-off process (it was never off tracing).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60817 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* tool/instruction.rb: create `trace_` prefix instructions.
* compile.c (ADD_TRACE): do not add `trace` instructions but add
TRACE link elements. TRACE elements will be unified with a next
instruction as instruction information.
* vm_trace.c (update_global_event_hook): modify all ISeqs when
hooks are enabled.
* iseq.c (rb_iseq_trace_set): added to toggle `trace_` instructions.
* vm_insnhelper.c (vm_trace): added.
This function is a body of `trace_` prefix instructions.
* vm_insnhelper.h (JUMP): save PC to a control frame.
* insns.def (trace): removed.
* vm_exec.h (INSN_ENTRY_SIG): add debug output (disabled).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60763 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_disasm): do not dump repeatedly same iseq which
has been dumped by catch tables.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60735 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (find_line_no): renamed to rb_iseq_line_no().
* vm_backtrace.c (calc_lineno): add a comment why we need to use "pos-1".
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60733 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_insn_operand_intern): show local variable operand
name in unified instructions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60732 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.h (iseq_line_info_entry): rename to iseq_insn_info_entry.
* vm_core.h (rb_iseq_constant_body): rename field name line_info_table
to insns_info and also from line_info_size to insns_info_size.
* compile.c (INSN): add struct insn_info to contain per insn information.
* compile.c (add_insn_info): added to add new insn_info entry.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60726 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
You can see ARGS_SIMPLE flag as follows:
$ ruby --dump=insns -e itself
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60528 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This re-introduces r60485.
This reverts commit 5a176b75b1.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60488 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
NODEs in AST are no longer objects managed by GC. This change will
remove the restriction imposed by the GC. For example, a NODE can use
more than five words (this is my primary purpose; we want to store the
position data for each NODE, for coverage library), or even a NODE can
have variable length (some kinds of NODEs have unused fields).
To do this, however, we need more work, since Ripper still uses T_NODE
objects managed by the GC.
The life time of NODEs is more obvious than other kinds of objects; they
are created at parsing, and they become disused immediately after
compilation. This change releases all NODEs by a few `xfree`s after
compilation, so performance will be improved a bit. In extreme example,
`eval("x=1;" * 10000000)` runs much faster (40 sec. -> 7.8 sec. on my
machine).
The most important part of this change is `ast_t` struct, which has
three contents: (1) NODE buffer (malloc'ed memory), (2) a reference to
the root NODE, and (3) an array that contains objects that must be
marked during parsing (such as literal objects). Some functions that
had received `NODE*` arguments, must now receive `ast_t*`.
* node.c, node.h: defines `ast_t` struct and related operations.
* gc.c, internal.h: defines `imemo_ast`.
* parse.y: makes `parser_params` struct have a reference to `ast_t`.
Instead of `rb_node_newnode`, use `rb_ast_newnode` to create a NODE.
* iseq.c, load.c, ruby.c, template/prelude.c.tmpl: modifies some
functions to handle `ast_t*` instead of `NODE*`.
* test/ruby/test_gc.rb: ad-hoc fix for a failed test. The test assumes
GC eden is increased at startup by NODE object creation. However,
this change now create no NODE object, so GC eden is not necessarily
increased.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60485 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to represent execution context [Feature #14038]
* vm_core.h (rb_thread_t): rb_thread_t::ec is now a pointer.
There are many code using `th` to represent execution context
(such as cfp, VM stack and so on). To access `ec`, they need to
use `th->ec->...` (adding one indirection) so that we need to
replace them by passing `ec` instead of `th`.
* vm_core.h (GET_EC()): introduced to access current ec. Also
remove `ruby_current_thread` global variable.
* cont.c (rb_context_t): introduce rb_context_t::thread_ptr instead of
rb_context_t::thread_value.
* cont.c (ec_set_vm_stack): added to update vm_stack explicitly.
* cont.c (ec_switch): added to switch ec explicitly.
* cont.c (rb_fiber_close): added to terminate fibers explicitly.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60440 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* array.c (rb_to_array_type): make public to share common code
internally.
* hash.c (rb_to_hash_type): make public to share common code
internally.
* symbol.c (rb_to_symbol_type): make public to share common code
internally.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60438 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_disasm_insn): Remove a meaningless
local variable assignment. `insn` is never changed
in this function, so a result of `insn_op_types(insn)`
is also never changed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59629 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h: rename absolute_path to realpath because it is expected name.
external APIs (#absolute_path methods) are remained.
* vm_core.h: remove rb_iseq_location_struct::path and
rb_iseq_location_struct::absolute_path and introduce pathobj.
if given path equals to given absolute_path (and most of case
it is true), pathobj is simply given path String. If it is not same,
pathobj is Array and pathobj[0] is path and pathobj[1] is realpath.
This size optimization reduce 8 bytes and
sizeof(struct rb_iseq_constant_body) is 200 bytes -> 192 bytes
on 64bit CPU.
To support this change, the following functions are introduced:
* pathobj_path() (defined in vm_core.h)
* pathobj_realpath() (ditto)
* rb_iseq_path() (decl. in vm_core.h)
* rb_iseq_realpath() (ditto)
* rb_iseq_pathobj_new() (ditto)
* rb_iseq_pathobj_set() (ditto)
* vm_core.h (rb_binding_t): use pathobj instead of path. If binding
is given at eval methods, realpath (absolute_path) was caller's
realpath. However, they should use binding's realpath.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58979 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
To convert the object implicitly, it has had two parts in convert_type() which are
1. lookink up the method's id
2. calling the method
Seems that strncmp() and strcmp() in convert_type() are slightly heavy to look up
the method's id for type conversion.
This patch will add and use internal APIs (rb_convert_type_with_id, rb_check_convert_type_with_id)
to call the method without looking up the method's id when convert the object.
Array#flatten -> 19 % up
Array#+ -> 3 % up
[ruby-dev:50024] [Bug #13341] [Fix GH-1537]
### Before
Array#flatten 104.119k (± 1.1%) i/s - 525.690k in 5.049517s
Array#+ 1.993M (± 1.8%) i/s - 10.010M in 5.024258s
### After
Array#flatten 124.005k (± 1.0%) i/s - 624.240k in 5.034477s
Array#+ 2.058M (± 4.8%) i/s - 10.302M in 5.019328s
### Test Code
require 'benchmark/ips'
class Foo
def to_ary
[1,2,3]
end
end
Benchmark.ips do |x|
ary = []
100.times { |i| ary << i }
array = [ary]
x.report "Array#flatten" do |i|
i.times { array.flatten }
end
x.report "Array#+" do |i|
obj = Foo.new
i.times { array + obj }
end
end
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58978 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (append_compile_error): set Qtrue for erred state with
showing the message immediately.
* iseq.c (prepare_iseq_build): make immediate message mode if main
or top level context, not to show the failed path twice in the
first line.
* iseq.c (cleanup_iseq_build): raise default message exception if
immediate message mode.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57313 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (iseqw_s_compile_file): deal with syntax error as well as
compile, and should not abort when rescued.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56268 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Use PRIuSIZE instead of PRIdSIZE. This fixes the exception message shown
on too large xmalloc2. This commit also fixes other incorrect use of
PRIdSIZE in other functions; though most of them are debug print.
* gc.c (heap_extend_pages, get_envparam_size, ruby_malloc_size_overflow,
gc_profile_dump_on): Use PRIuSIZE instead of PRIdSIZE as the passed
value is size_t, not ssize_t.
* iseq.c (get_line_info, rb_iseq_disasm_insn): Ditto.
* sprintf.c (rb_str_format): Ditto.
* thread_win32.c (native_thread_create): Ditto.
* vm.c (get_param): Ditto.
* ext/objspace/objspace_dump.c (dump_append_string_content,
dump_object): Ditto.
* ext/socket/raddrinfo.c (host_str, port_str): Ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56156 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (Init_ISeq): undefine allocator of InstructionSequence,
to get rid of segfaults at method call on uninitialized object.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55981 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and VM_FRAME_CFRAME_P().
Most of case, RUBY_VM_NORMAL_ISEQ_P() is no
longer needed.
* vm_core.h: introduce rb_obj_is_iseq().
* cont.c, vm.c: VM_FRAME_MAGIC_DUMMY with
VM_FRAME_FLAG_CFRAME.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55804 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* *.c: rename rb_funcall2 to rb_funcallv, except for extensions
which are/will be/may be gems. [Fix GH-1406]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55773 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
[Bug #12628]
This patch introduce many changes.
* Introduce concept of "Block Handler (BH)" to represent
passed blocks.
* move rb_control_frame_t::flag to ep[0] (as a special local
variable). This flags represents not only frame type, but also
env flags such as escaped.
* rename `rb_block_t` to `struct rb_block`.
* Make Proc, Binding and RubyVM::Env objects wb-protected.
Check [Bug #12628] for more details.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55766 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to prevent calling super classes' methods.
Without this patch, you can write workaround like:
class << RubyVM::InstructionSequence
def translate; end
undef translate
end
* test/ruby/test_iseq.rb: add a test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55656 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
instead of st_table.
* iseq.c (prepare_iseq_build): don't allocate ivar_cache_table
until it has at least one element.
* iseq.c (compile_data_free): free ivar_cache_table only if it
is allocated.
* compile.c (get_ivar_ic_value): allocate if the table is not
allocated yet.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55002 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
instance variable accesses. Reducing memory consumption,
rasing cache hit rate and rasing branch prediction hit rate
are expected. A part of [Bug #12274].
* iseq.h (struct iseq_compile_data): introduce instance
variable IC table for sharing.
* iseq.c (prepare_iseq_build, compile_data_free):
construct/destruct above table.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54976 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* error.c (rb_compile_err_append): rb_thread_t::base_block is no
longer used.
* iseq.c (rb_iseq_compile_with_option): ditto, no protection is
needed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54345 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (struct parser_params): move parse_in_eval flag from
rb_thread_t.
* parse.y (rb_parser_set_context): set parsing context, not only
mild error flag.
* iseq.c (rb_iseq_compile_with_option): the parser now refers no
thread local states to be restored.
* vm_eval.c (eval_string_with_cref): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54343 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_compile_with_option): make the parser in mild
error.
* load.c (rb_load_internal0): ditto.
* parse.y (yycompile0): return the error message within the error
to be raised. [Feature #11951]
* parse.y (parser_compile_error): accumulate error messages in the
error_buffer.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54189 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (prepare_iseq_build): enable coverage by coverage_enabled
option, not by parse_in_eval flag in the thread context.
* iseq.h (rb_compile_option_struct): add coverage_enabled flag.
* parse.y (yycompile0): set coverage_enabled flag if coverage
array is made.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54081 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (prepare_iseq_build): set coverage at once, not
repeatedly resetting.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54076 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
All of the strings created here eventually get converted to
fstrings when they are frozen into the iseq. Prepare the
fstring early so we may reduce a one or two objects.
This is a very minor change, mainly for the '<main>' dedupe.
* compile.c (caller_location): use rb_fstring_cstr for "<compiled>"
(it is converted to fstring anyways inside rb_iseq_new_with_opt)
* iseq.c (iseqw_s_compile): ditto
* iseq.c (rb_iseq_new_main): use rb_fstring_cstr for "<main>"
* vm.c (Init_VM): ditto, share with with above
* iseq.c (iseqw_s_compile_file): rb_fstring before rb_io_t->pathv
share "<main>" with above
* vm.c (rb_binding_add_dynavars): fstring "<temp>" immediately
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53659 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (iseqw_mark): as wrapped iseq is isolated from the call
stack, it needs to take care of its parent and ancestors, so
that they do not become orphans. [ruby-core:72620] [Bug #11928]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53514 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_compile_with_option): no volatile on gcc other
than 4.8.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53465 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_compile_with_option): prepare arguments outside
EXEC_TAG, and make local variables volatile not to be clobbered
by longjmp.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53460 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_iseq_compile_with_option): narrow down protected
region, and check/convert/prepare arguments before setting
base_block which needs to roll back.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53282 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and a pre-compilation/runtime loader sample.
[Feature #11788]
* iseq.c: add new methods:
* RubyVM::InstructionSequence#to_binary_format(extra_data = nil)
* RubyVM::InstructionSequence.from_binary_format(binary)
* RubyVM::InstructionSequence.from_binary_format_extra_data(binary)
* compile.c: implement body of this new feature.
* load.c (rb_load_internal0), iseq.c (rb_iseq_load_iseq):
call RubyVM::InstructionSequence.load_iseq(fname) with
loading script name if this method is defined.
We can return any ISeq object as a result value.
Otherwise loading will be continue as usual.
This interface is not matured and is not extensible.
So that we don't guarantee the future compatibility of this method.
Basically, you should'nt use this method.
* iseq.h: move ISEQ_MAJOR/MINOR_VERSION (and some definitions)
from iseq.c.
* encoding.c (rb_data_is_encoding), internal.h: added.
* vm_core.h: add several supports for lazy load.
* add USE_LAZY_LOAD macro to specify enable or disable of
this feature.
* add several fields to rb_iseq_t.
* introduce new macro rb_iseq_check().
* insns.def: some check for lazy loading feature.
* vm_insnhelper.c: ditto.
* proc.c: ditto.
* vm.c: ditto.
* test/lib/iseq_loader_checker.rb: enabled iff suitable
environment variables are provided.
* test/runner.rb: enable lib/iseq_loader_checker.rb.
* sample/iseq_loader.rb: add sample compiler and loader.
$ ruby sample/iseq_loader.rb [dir]
will compile all ruby scripts in [dir].
With default setting, this compile creates *.rb.yarb files
in same directory of target .rb scripts.
$ ruby -r sample/iseq_loader.rb [app]
will run with enable to load compiled binary data.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52949 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* error.c (name_err_local_variables): new method
NameError#local_variables for internal use only.
[Feature #11777]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52942 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
because apply it multiple times change the sequence.
(iseq != peephole_optimize(load(iseq.to_a)))
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52924 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
call RubyVM::InstructionSequence.translate(iseq) if this method
is defined. If the return value is also an object of
RubyVM::InstructionSequence, then use it instead of created one.
For example, this method is useful to test iseq dumper/loader
such as RubyVM::InstructionSequence#to_a and rb_iseq_load().
Because this method is for such internal experimental usage,
the interface is not matured. For example, this interface has
no extensibility. Two or more translaters can not run
simultaneously.
So that we don't guarantee future compatibility of this method.
Basically, do not use this method.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52921 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Fields in rb_iseq_t::variable_body are contained by
rb_iseq_t::body::mark_ary (hidden Array object).
Index 0 to 2 of mark_ary are reserved by these objects.
* iseq.c: catch up this fix.
* compile.c (rb_iseq_original_iseq): trivial rewrite.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52865 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
ISEQ_ORIGINAL_ISEQ_ALLOC() macro.
* compile.c: use them to access original iseq buffer.
* iseq.c: ditto.
* vm_core.h: rename iseq field to support this fix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52862 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c: use them.
* iseq.c: ditto.
* iseq.c (rb_iseq_coverage): added.
* thread.c (update_coverage): use rb_iseq_coverage().
* vm_core.h: rename coverage field name to support this fix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52860 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c, iseq.c: use ISEQ_COMPILE_DATA().
* vm_core.h: rename compile_data field to support this fix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52858 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.h (rb_compile_option_struct): rename the member
frozen_string_literal_debug as debug_frozen_string_literal.
[Feature #11725]
* ruby.c (proc_options): do not set $DEBUG and $VERBOSE only if no
arguments is given.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52749 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Add some comments to clarify the allocated field used for the
allocations while we're at it.
TODO: figure out a better way of testing/maintaining this...
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52419 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
in a made option value.
* vm_opts.h: forgot to add OPT_FROZEN_STRING_LITERAL_DEBUG
at last commit.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52258 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
If this option is enabled, the modify error will be:
can't modify frozen String (RuntimeError) =>
can't modify frozen String, created at test.rb:3 (RuntimeError)
* iseq.h: add compile option frozen_string_literal_debug.
* compile.c: catch up this fix.
* error.c (rb_error_frozen): ditto.
* iseq.c (set_compile_option_from_hash): ditto.
* test/ruby/test_rubyoptions.rb: add a test for this fix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52257 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (rb_insn_operand_intern): change kw in callinfo disasm from the
number of keyword arguments to an ordered list of the keywords used.
[Feature #11589]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52123 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (iseq_compile_each): override compile option by option
given by pragma.
* iseq.c (rb_iseq_make_compile_option): extract a function to
overwrite rb_compile_option_t.
* parse.y (parser_set_compile_option_flag): introduce pragma to
override compile options.
* parse.y (magic_comments): new pragma "fronzen-string-literal".
[Feature #8976]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51953 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* rb_call_info (ci) has compiled fixed information.
* if ci->flag & VM_CALL_KWARG, then rb_call_info is
also rb_call_info_with_kwarg. This technique reduce one word
for major rb_call_info data.
* rb_calling_info has temporary data (argc, blockptr, recv).
for each method dispatch. This data is allocated only on
machine stack.
* rb_call_cache is for inline method cache.
Before this patch, only rb_call_info_t data is passed.
After this patch, above three structs are passed.
This patch improves:
* data locarity (rb_call_info is now read-only data).
* reduce memory consumption (rb_call_info_with_kwarg,
rb_calling_info).
* compile.c: use above data.
* insns.def: ditto.
* iseq.c: ditto.
* vm_args.c: ditto.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
* vm_insnhelper.h: ditto.
* iseq.h: add iseq_compile_data::ci_index and
iseq_compile_data::ci_kw_indx.
* tool/instruction.rb: introduce TS_CALLCACHE operand type.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51903 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
string literals.
[Feature #11473]
This addition is not specification change, but to try frozen
string literal world discussed on [Feature #11473].
You can try frozen string literal world using this magical line:
RubyVM::InstructionSequence.compile_option =
{frozen_string_literal: true}
Note that this is a global compilation option, so that you need to
compile another script like that:
p 'foo'.frozen? #=> false
RubyVM::InstructionSequence.compile_option =
{frozen_string_literal: true}
p 'foo'.frozen? #=> false, because this line is already compiled.
p eval("'foo'.frozen?") #=> true
Details:
* String literals are deduped by rb_fstring().
* Dynamic string literals ("...#{xyz}...") is now only frozen,
not deduped. Maybe you have other ideas.
Now, please do not use this option on your productions :)
Of course, current specification can be changed.
* compile.c: ditto.
* test/ruby/test_iseq.rb: add a test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51659 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
iseq_location_setup always sets path, label and base_label fields,
and the only caller of iseq_location_setup (prepare_iseq_build) will
always pass non-nil `name' and `path' arguments.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51581 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* iseq.c (iseq_memsize): reimplement for wrapper
(param_keyword_size): extracted from iseq_memsize
(iseqw_mark): new mark function
(iseqw_data_type): new data type
(iseqw_new): wrap as iseqw_data_type
(iseqw_check): adjust for wrapper
(Init_ISeq): remove iseqw_iseq_key initialization
* test/objspace/test_objspace.rb: new test
[ruby-core:70344] [Feature #11435]
v2 changes:
- added RUBY_TYPED_WB_PROTECTED and write barrier
- account for rb_call_info_kw_arg_t entries
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51547 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_iseq_param_keyword::table and
rb_iseq_param_keyword::default_values.
* compile.c: catch up this fix.
* iseq.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51357 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
All contents of previous rb_iseq_t is in rb_iseq_t::body.
Remove rb_iseq_t::self because rb_iseq_t is an object.
RubyVM::InstructionSequence is wrapper object points T_IMEMO/iseq.
So RubyVM::ISeq.of(something) method returns different wrapper
objects but they point the same T_IMEMO/iseq object.
This patch is big, but most of difference is replacement of
iseq->xxx to iseq->body->xxx.
(previous) rb_iseq_t::compile_data is also located to
rb_iseq_t::compile_data.
It was moved from rb_iseq_body::compile_data.
Now rb_iseq_t has empty two pointers.
I will split rb_iseq_body data into static data and dynamic data.
* compile.c: rename some functions/macros.
Now, we don't need to separate iseq and iseqval (only VALUE).
* eval.c (ruby_exec_internal): `n' is rb_iseq_t (T_IMEMO/iseq).
* ext/objspace/objspace.c (count_imemo_objects): count T_IMEMO/iseq.
* gc.c: check T_IMEMO/iseq.
* internal.h: add imemo_type::imemo_iseq.
* iseq.c: define RubyVM::InstructionSequnce as T_OBJECT.
Methods are implemented by functions named iseqw_....
* load.c (rb_load_internal0): rb_iseq_new_top() returns
rb_iseq_t (T_IMEMO/iesq).
* method.h (rb_add_method_iseq): accept rb_iseq_t (T_IMEMO/iseq).
* vm_core.h (GetISeqPtr): removed because it is not T_DATA now.
* vm_core.h (struct rb_iseq_body): remove padding for
[Bug #10037][ruby-core:63721].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51327 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_iseq_t::local_iseq is not constant data because
local_iseq::flip_cnt can be modified (commentted).
* compile.c: catch up this fix.
* iseq.c: ditto.
* vm_insnhelper.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51269 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and VALUE *iseq to code.
* iseq.c (rb_iseq_disasm_insn): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51267 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
gc.c (gc_mark_children)only calls mark_func if the T_DATA ptr is
non-NULL, so avoid redundantly checking for that in each
mark function.
* iseq.c (iseq_mark): remove check for data pointer
* proc.c (binding_mark): ditto
* vm.c (rb_thread_mark): ditto
* vm_trace.c (tp_mark): ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51252 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Fix RubyVM::InstructionSequence#to_a after r49517
Keywords were made symbols to fix [Bug #10831] [ruby-core:68031],
so we should dump symbols as-is instead of attempting to convert
them from IDs
* iseq.c (iseq_data_to_ary): dump kw_arg as symbol
* test/-ext-/iseq_load/test_iseq_load.rb: test kw_arg roundtrip
[ruby-core:69891] [Bug #11338]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51190 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
clone iseq any more.
* class.c (clone_method): share iseq between cloned methods. All of
method dependent information are able to refer from method entry.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51171 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* internal.h, iseq.c (rb_iseq_klass): remove it because
rb_iseq_t::klass is removed.
* vm_insnhelper.c (vm_super_outside): do not see cfp->iseq, but
check callable method entry on a frame.
This fix simplify the logic to search super class.
* test/ruby/test_method.rb: support super() from Proc.
Now, [Bug #4881] and [Bug #3136] was solved.
* proc.c (rb_mod_define_method): catch up this change.
* vm.c (vm_define_method): ditto.
* vm_backtrace.c (rb_profile_frames): now, each `frame' objects
are rb_callable_method_entry_t data or iseq VALUEs.
This fix introduce minor compatibility issue that
rb_profile_frame_label() always returns
rb_profile_frame_base_label().
* test/-ext-/debug/test_profile_frames.rb: catch up this change.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51166 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This simplifies all the callers and makes code easier to use
and review. I was confused about the need for RB_GC_GUARD
in define_{aset,aref}_method of struct.c without reading
rb_add_method_iseq.
Likewise, do the same for rb_iseq_clone, where the GC guard
only seems neccesary iff RGenGC is disabled.
* vm_method.c (rb_add_method_iseq): add RB_GC_GUARD
* class.c (clone_method): remove RB_GC_GUARD
* struct.c (define_aref_method): ditto
(define_aset_method): ditto
* vm.c (vm_define_method):
* iseq.c (rb_iseq_clone): add RB_GC_GUARD
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51079 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
mame
svn
nobu
ko1
k0kubun
normal
yui-knk
shyouhei
tenderlove
naruse
kazu
ktsj
watson1978
rhe
tarui
shugo
hsbt