* node.h (nd_cfnc, struct RNode): nd_cfnc has been unused
since r49938, and also cfunc field.
* .gdbinit (nd_cfnc): ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63511 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
If a function declarator includes no parameter list, that doesn't
mean the function takes zero parameter. rb_ast_new here does take
zero parameter, so it should be explicitly prototypes as (void).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63370 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
NODE_FOR was used both for "for"-statement itself and for
multi-assignment of for-statement (for x, y, in...end).
This change separates the two purposes, NODE_FOR for the former, and
newly introduced NODE_FOR_MASGN for the latter.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61871 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
In parse.y many functions were suffixed "_gen" and had companion macros
to pass struct parser_params implicitly, which made parse.c bigger and
more obscure.
This change expands and removes almost all "*_gen" macros. This
requires explicit passing of struct parser_params, i.e., we need to
write "foo(p, ..)" instead of "foo(..)". However, it is just extra
three letters. I believe that this is easier to understand.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61818 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Because the name "code_range" is ambiguous with encoding's.
Abbreviations ("crange", and "cr") are also renamed to "loc".
The traditional "code_location" (a pair of lineno and column) is
renamed to "code_position". Abbreviations are also renamed
(first_loc to beg_pos, and last_loc to end_pos).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61721 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
"loc" was ambiguous; it might refer both a location and a code range.
This change uses "loc" for a location, and "crange" or "cr" for a code
range.
A location (abbr. loc) is a point in a program and consists of line
number and column number. A code range (abbr. crange and cr) is a range
within a program and consists of a pair of locations which is the first
and the last.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61690 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
I think that recycling the delimiter string objects doesn't pay its
complexity.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61682 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
NODE_PRELUDE contains a `BEGIN` node, a main node, and compile_option.
This node is assumed that it must be located immediately under the root
NODE_SCOPE, but this strange assumption is not so good, IMO.
This change removes the assumtion; it integrates the former two nodes by
block_append, and moves compile_option into rb_ast_body_t.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61610 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* node.c (rb_node_init): Initialize last location with 0.
* node.h (struct rb_code_range_struct): Define a structure
which contains first location and last location of a node.
* node.h (struct RNode): Use rb_code_range_t to store last
location of a node.
* node.h (nd_column, nd_set_column, nd_lineno, nd_set_lineno):
Follow-up the change of struct RNode.
* node.h (nd_last_column, nd_set_last_column, nd_last_lineno, nd_set_last_lineno):
Define getter/setter macros for last location of RNode.
* parse.y : Set last location of tokens.
Thanks to Yusuke Endoh (mame) for design of data structures.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60750 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* node.h (NEW_CASE2): Omit first argument of NEW_CASE2,
bacause the first argument of NEW_CASE2 is always 0.
* parse.y: Ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60714 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
r60655 changed the usage of bison by defining a customized YYLTYPE,
which seemed to cause a random stall at rb_thread_terminate_all.
Kazuki Tsujimoto investigated the issue and pointed out the commit that
caused it. Thanks!
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60660 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_code_range_t has two t_code_location_t, i.e., the first and last
locations.
This is used for YYLTYPE, tracked locations of bison, and will be also
used for representing the "range", the first and the last locations of
each NODE. Currently, each NODE keeps only the first location, though.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60655 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
`rb_code_location_t` has two integers, lineno and column, which point to
one location on a code. Now `rb_code_location_t` is used instead of
`VALUE nd_location`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60652 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This magic number has two meanings depending upon the context:
* "required keyword argument (no name)" on NODE_LASGN (`def foo(x:)`)
* "rest argument (no name)" on NODE_MASGN and NODE_POSTARG
('a, b, * = ary` or `a, b, *, z = ary`)
To show this intention explicitly, two macros are introduced:
NODE_SPECIAL_REQUIRED_KEYWORD and NODE_SPECIAL_NO_NAME_REST.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60650 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Now, casting NODE to VALUE is not recommended. This change requires an
explicit cast from VALUE to NODE to use the NODE utility functions such
as `nd_type`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60643 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* node.h: NODE_FL_CREF_PUSHED_BY_EVAL was defined as
NODE_FL_NEWLINE by r25984, redefined by r40703
and removed by r49897.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60627 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* node.h (RNode): Now nd_reserved is used to store location
information, so rename nd_reserved to nd_location.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60591 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
When NODE_WHEN is compiled by iseq_compile_each0,
the node passed to compile_when is NODE_WHEN (not NODE_CASE).
So we can not handle the location of NODE_CASE of
case statements which don't have case expressions.
e.g. :
```
case; when 1; foo; when 2; bar; else baz; end
```
This commit adds NODE_CASE2, and compiles it by
iseq_compile_each0.
* compile.c (compile_case): Does not call COMPILE_ when
NODE_CASE does not have case expressions.
* compile.c (compile_case2): Compile NODE_CASE2 by compile_case2.
* compile.c (compile_when): Delete an obsoleted function.
* compile.c (iseq_compile_each0): Compile NODE_CASE2.
* ext/objspace/objspace.c (count_nodes): Add NODE_CASE2 case.
* node.c (dump_node, rb_gc_mark_node): Add NODE_CASE2 case.
* node.h (node_type): Add NODE_CASE2.
* node.h (NEW_CASE2): Add a macro which generates NODE_CASE2.
* parse.y: Generate NODE_CASE2 if case expressions don't exist.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60585 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* node.c (A_NODE_HEADER): Print lineno.
* node.h (nd_column, nd_set_column): Store column
number with 16-bit.
* node.h (nd_lineno, nd_set_lineno): Define
getter/setter macros for lineno of RNode.
* parse.y : Set first lineno of tokens.
Thanks to takeshinoda for review.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60580 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This re-introduces r60485.
This reverts commit 5a176b75b1.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60488 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
NODEs in AST are no longer objects managed by GC. This change will
remove the restriction imposed by the GC. For example, a NODE can use
more than five words (this is my primary purpose; we want to store the
position data for each NODE, for coverage library), or even a NODE can
have variable length (some kinds of NODEs have unused fields).
To do this, however, we need more work, since Ripper still uses T_NODE
objects managed by the GC.
The life time of NODEs is more obvious than other kinds of objects; they
are created at parsing, and they become disused immediately after
compilation. This change releases all NODEs by a few `xfree`s after
compilation, so performance will be improved a bit. In extreme example,
`eval("x=1;" * 10000000)` runs much faster (40 sec. -> 7.8 sec. on my
machine).
The most important part of this change is `ast_t` struct, which has
three contents: (1) NODE buffer (malloc'ed memory), (2) a reference to
the root NODE, and (3) an array that contains objects that must be
marked during parsing (such as literal objects). Some functions that
had received `NODE*` arguments, must now receive `ast_t*`.
* node.c, node.h: defines `ast_t` struct and related operations.
* gc.c, internal.h: defines `imemo_ast`.
* parse.y: makes `parser_params` struct have a reference to `ast_t`.
Instead of `rb_node_newnode`, use `rb_ast_newnode` to create a NODE.
* iseq.c, load.c, ruby.c, template/prelude.c.tmpl: modifies some
functions to handle `ast_t*` instead of `NODE*`.
* test/ruby/test_gc.rb: ad-hoc fix for a failed test. The test assumes
GC eden is increased at startup by NODE object creation. However,
this change now create no NODE object, so GC eden is not necessarily
increased.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60485 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
A temporary NODE object was allocated to create iseq. Instead, this
patch allocates a dummy NODE as auto variable, and discard it soon.
This change is intended as a preparation to manage AST NODEs out of GC.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60390 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* node.h (enum node_type): remove NODE_DREGX_ONCE which is not
used anymore.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60347 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* ext/objspace/objspace.c (count_nodes): This node_type has
not been used since r24128.
* node.c (dump_node): ditto
* node.h (node_type, NEW_BMETHOD): ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60336 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* ext/objspace/objspace.c (count_nodes): This node_type has
not been used since r11840.
* node.c (dump_node, rb_gc_mark_node): ditto
* node.h (node_type, NEW_BLOCK_ARG): ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60334 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* ext/objspace/objspace.c (count_nodes): This node_type has
not been used since r13236.
* node.c (dump_node, rb_gc_mark_node): ditto
* node.h (node_type, NEW_TO_ARY): ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60332 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (defined_expr0): This node_type has
not been used since r11614.
* ext/objspace/objspace.c (count_nodes): ditto
* node.c (dump_node): ditto
* node.h (node_type, NEW_CVDECL): ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60307 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* node.h (rb_node_newnode_longlife): The definition
of this function was deleted r24490.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60265 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* node.c (A_NODE_HEADER): Print column number.
* node.h (nd_column, nd_set_column): Define getter/setter
macros for column number of RNode.
* parse.y: Set first column number of tokens.
Notes:
* Use `@n` to get the location of token in parse.y.
* When we use `@n`, arguments of yyerror and yylex are
changed.
* Initialize column of nodes with -1 to make it easy
to detect nodes which we forget to set a column number.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60220 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* node.h (nd_refinements_): nd_refinements_ was
introduced on r49894. But this macro has not been
used since r49897.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59943 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
`unless` statement was a syntactic sugar for `if` statement,
which made the result of branch coverage hard to understand.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59889 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* node.h (nd_line): should sign-extend. shifting `VALUE` extends
with zero bits if `sizeof(VALUE)` equals to `sizeof(int)`. the
zero bits are truncated if `sizeof(VALUE)` is bigger enough.
[ruby-core:80920] [Bug #13523]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58503 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (trace_lex_state): trace lex_state changes if yydebug is
set, and send the messages to rb_stdout.
* parse.y (rb_parser_printf): store YYPRINTF messages per lines
so that lex_state traces do not mix.
* tool/ytab.sed: add parser argument to yy_stack_print too.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53095 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (iseq_peephole_optimize): peephole optimization for
branchnil jumps.
* compile.c (iseq_compile_each): generate save navigation operator
code.
* insns.def (branchnil): new opcode to pop the tos and branch if
it is nil.
* parse.y (NEW_QCALL, call_op, parser_yylex): parse token '.?'.
[Feature #11537]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52214 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (iseq_compile_each), node.h (NEW_OP_ASGN22): attrset
ID no longer needs to be stored in a NODE, create at byte code
generation.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52113 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (iseq_compile_each): override compile option by option
given by pragma.
* iseq.c (rb_iseq_make_compile_option): extract a function to
overwrite rb_compile_option_t.
* parse.y (parser_set_compile_option_flag): introduce pragma to
override compile options.
* parse.y (magic_comments): new pragma "fronzen-string-literal".
[Feature #8976]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51953 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
RB_GC_GUARD is sufficient to prevent tail call optimization from
making the object invisible from GC., and we don't need to
encourage more volatile usage.
* parse.y (rb_parser_compile_cstr): remove volatile arg
(rb_parser_compile_string): ditto
(rb_parser_compile_file): ditto
(rb_parser_compile_string_path): ditto
(rb_parser_compile_file_path): ditto
[ruby-core:70323] [Misc #11431]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51537 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and related functions from node.h to internal.h.
* variable.c: remove unused include pragma.
* common.mk: remove unused dependency.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49947 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
memo->v1 and memo->v2 is WB protected values.
So use MEMO_V1/V2_SET() macros to set these values.
memo->u3 is ambiguous (sometimes a VALUE, sometimes an integer
value), so use gc_mark_maybe() in gc.c to mark it.
Rename NEW_MEMO() to MEMO_NEW().
Move MEMO_FOR and NEW_MEMO_FOF macros from node.h.
Export a rb_imemo_new() function for ext/ripper.
* node.h: remove NODE_MEMO.
* enum.c: catch up these change.
* enumerator.c: ditto.
* load.c: ditto.
* ext/objspace/objspace.c (count_nodes): ditto.
* gc.c (gc_mark_children): mark imemo_memo type.
* parse.y (new_args_gen): use T_IMEMO.
(I'm not sure it is working correctly...)
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49942 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
T_IMEMO is Internal Memo type, internal use only.
T_IMEMO has same purpose of NODE_MEMO.
To insert T_IMEMO, type numbers are modified a little.
* internal.h: define struct RIMemo. Each RIMemo objects
has imemo_type. We can observe it by the imemo_type() function.
* gc.c (rb_imemo_new): added.
* node.h: remove NODE_CREF and NEW_CREF().
* node.c (rb_gc_mark_node): ditto.
* vm.c (vm_cref_new): use rb_imem_new().
* vm_eval.c: ditto.
* vm_eval.c (eval_string_with_cref):
* vm_eval.c (rb_type_str):
* vm_insnhelper.c: use RIMemo objects for CREF.
* ext/objspace/objspace.c: support T_IMEMO.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49932 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_cref_t is data type of CREF. Now, the body is still NODE.
It is easy to understand what is CREF and what is pure NODE.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49897 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* CREF_CLASS(cref)
* CREF_NEXT(cref)
* CREF_VISI(cref)
* CREF_VISI_SET(cref, v)
* CREF_REFINEMENTS(cref)
* CREF_PUSHED_BY_EVAL(cref)
* CREF_PUSHED_BY_EVAL_SET(cref)
* CREF_OMOD_SHARED(cref)
* CREF_OMOD_SHARED_SET(cref)
* CREF_OMOD_SHARED_UNSET(cref)
This is process to change CREF data type from NODE.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49894 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This function creates internal use only array (which is completely
hided by ObjectSpace.each_object) with filling nil.
Otherwise, it can be incldues strange VALUEs.
* internal.h: added.
* node.h: use rb_ary_tmp_new_fill() for MEMO.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47189 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* node.h (NODE_PRIVATE_RECV): name a magic number, `self` as the
receiver of a setter method call.
* compile.c (private_recv_p), parse.y (attr_receiver): use the
named macro.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46361 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (yycompile): store file name as String to keep the encoding.
* parse.y (rb_parser_compile_string_path, rb_parser_compile_file_path):
new functions to pass file name as a String.
* parse.y (gettable_gen): return a copy of the original file name, not
a copy in filesystem encoding.
* vm_eval.c (eval_string_with_cref): use Qundef instead of "(eval)".
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42230 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
See this ticet about RGENGC.
* gc.c: Add several flags:
* RGENGC_DEBUG: if >0, then prints debug information.
* RGENGC_CHECK_MODE: if >0, add assertions.
* RGENGC_PROFILE: if >0, add profiling features.
check GC.stat and GC::Profiler.
* include/ruby/ruby.h: disable RGENGC by default (USE_RGENGC == 0).
* array.c: add write barriers for T_ARRAY and generate sunny objects.
* include/ruby/ruby.h (RARRAY_PTR_USE): added. Use this macro if
you want to access raw pointers. If you modify the contents which
pointer pointed, then you need to care write barrier.
* bignum.c, marshal.c, random.c: generate T_BIGNUM sunny objects.
* complex.c, include/ruby/ruby.h: add write barriers for T_COMPLEX
and generate sunny objects.
* rational.c (nurat_s_new_internal), include/ruby/ruby.h: add write
barriers for T_RATIONAL and generate sunny objects.
* internal.h: add write barriers for RBasic::klass.
* numeric.c (rb_float_new_in_heap): generate sunny T_FLOAT objects.
* object.c (rb_class_allocate_instance), range.c:
generate sunny T_OBJECT objects.
* string.c: add write barriers for T_STRING and generate sunny objects.
* variable.c: add write barriers for ivars.
* vm_insnhelper.c (vm_setivar): ditto.
* include/ruby/ruby.h, debug.c: use two flags
FL_WB_PROTECTED and FL_OLDGEN.
* node.h (NODE_FL_CREF_PUSHED_BY_EVAL, NODE_FL_CREF_OMOD_SHARED):
move flag bits.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@40703 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
has been already obsolete. patch by Thomas Enebo.
[ruby-core:41929][Bug #5847]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@34984 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
int, to match with rb_iseq_t.
* parse.y (new_args_gen): check overflow.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@34139 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
used in ripper.
* node.h (rb_parser_{malloc,realloc,calloc,free}): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@28975 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
yui-knk
nobu
shyouhei
mame
ko1
hsbt
normal
akr
shugo
nari
muraken