* thread.c (struct join_arg): restructure and make smaller
(thread_join_sleep): avoid timeofday() call if forever
(thread_join): pass join_arg.delay directly
(rb_thread_inspect_msg): remove, inline into rb_thread_inspect
(rb_thread_inspect): reduce branching and string creation
* thread_pthread.c (native_set_thread_name): create string directly
to avoid reparsing. [Misc #10723]
This reduces time in benchmark/bm_vm_thread_create_join.rb by
a few percent.
Minor improvements only:
target 0: 2.1.5 (ruby 2.1.5p273 (2014-11-13 revision 48405) [x86_64-linux])
target 1: trunk (ruby 2.3.0dev (2015-01-16 trunk 49282) [x86_64-linux])
target 2: built (ruby 2.3.0dev (2015-01-16 trunk 49282) [x86_64-linux])
benchmark results:
minimum results in each 3 measurements.
Execution time (sec)
name 2.1.5 trunk built
vm_thread_create_join 1.049 1.242 1.138
Speedup ratio: compare with the result of `2.1.5' (greater is better)
name trunk built
vm_thread_create_join 0.845 0.923
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49430 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
set thread name visible with ps command on GNU/Linux.
Ex. ps -o %c -L
* thread.c (thread_start_func_2): Call native_set_thread_name at
beginning.
(rb_thread_inspect_msg): Extract from rb_thread_inspect.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47670 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This will make it easier for us to try alternative mutex/condvar
implementations while still using pthreads for thread management.
[Feature #10134]
* thread_pthread.h: define RB_NATIVETHREAD_LOCK_INIT and
RB_NATIVETHREAD_COND_INIT macros
* thread_pthread.c (native_mutex_lock, native_mutex_unlock,
native_mutex_trylock, native_mutex_initialize,
native_mutex_destroy, native_cond_wait):
use rb_nativethread_lock_t instead of pthread_mutex_t
* thread_pthread.c (native_mutex_debug): make argument type-agnostic
to avoid later cast.
* thread_pthread.c (register_cached_thread_and_wait):
replace PTHREAD_COND_INITIALIZER with RB_NATIVETHREAD_COND_INIT,
use native_mutex_{lock,unlock}
* thread_pthread.c (use_cached_thread):
use native_mutex_{lock,unlock}
* thread_pthread.c (native_sleep):
use rb_nativethread_lock_t to match th->interrupt_lock,
use native_mutex_{lock,unlock}
* thread_pthread.c (timer_thread_lock): use rb_nativethread_lock_t type
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47185 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in (rb_cv_scalar_pthread_t): pthread_t is not required
to be a scalar type.
* thread.c (fill_thread_id_string, thread_id_str): dump pthread_t
in hexadecimal form if it is not a scalar type, assume it can be
represented in a pointer form otherwise. based on the patch by
Rei Odaira at [ruby-core:62867]. [ruby-core:62857] [Bug #9884]
* thread_pthread.c (Init_native_thread, thread_start_func_1),
(native_thread_create): set thread_id_str if needed.
* vm_core.h (rb_thread_t): add thread_id_string if needed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46406 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (timer_thread): add a flag to tell timer thread
is created, since 0 may be a valid value as pthread_t.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46405 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (rb_thread_wakeup_timer_thread_fd): use a local
variable for errno.
* thread_pthread.c (consume_communication_pipe): ditto. add
EWOULDBLOCK case.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45909 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (ubf_select): compare thread_id with
pthread_equal() but not directly.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45906 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (timer_thread_sleep): use a local variable for
errno.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45898 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in: check if pthread_setname_np is available.
* thread_pthread.c: pthread_setname_np is not available on old
Darwins. [ruby-core:60524] [Bug #9492]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44925 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_thread_struct): aggregate cpu stuff into a struct,
so that a debugger can show its content at once.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44722 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (ruby_stack_overflowed_p): range of rlim_cur
may be larger than size_t. [ruby-core:60113] [Bug #9454]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44715 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c: get current main thread stack size, which may
be expanded than allocated size at initialization, by rlimit().
[ruby-core:60113] [Bug #9454]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44712 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (rb_thread_create_timer_thread): fix for platforms
where PTHREAD_STACK_MIN is a dynamic value and not a compile-time
constant. [ruby-dev:47911] [Bug #9436]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44675 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (rb_thread_create_timer_thread): expand timer
thread stack size to get rid of segfault on FreeBSD/powerpc64.
based on the patch by Steve Wills at [ruby-core:59923].
[ruby-core:56590] [Bug #8783]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44671 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (ruby_init_stack): set stack_start properly by
get_main_stack() if possible.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43706 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (thread_timer): set timer thread name on OSX too.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43128 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (native_thread_init_stack): wait the creator thread
to fill machine stack info, if get_stack_of() is available.
* thread_pthread.c (native_thread_create): fill the created thread
stack info after starting, if get_stack_of() is available.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42732 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (native_thread_create): define attr only if it is
used, and merge pthread_create() calls.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42731 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (get_main_stack): separate function to get stack of
main thread.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42730 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (hpux_attr_getstackaddr): vps_pagesize is defaulted
to 16 and in Kbytes. [ruby-core:56863]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42728 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (hpux_attr_getstackaddr): basic support for the
get_stack() under HP-UX. based on the patch by michal@rokos.cz
(Michal Rokos) at [ruby-core:56645]. [Feature #8793]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42716 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Move native thread related lines from vm_core.h.
And declare several functions "rb_nativethread_lock_*",
manipulate locking.
* common.mk: add thread_native.h.
* thread.c: add functions "rb_nativethread_lock_*".
* thraed.c, thread_[pthread,win32].[ch]: rename rb_thread_lock_t
to rb_nativethread_lock_t to make it clear that this lock is for
native thraeds, not for ruby threads.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42133 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This fixes a compilation failure while cross-compiling for Tensilica
Xtensa Processor.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@40498 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This fixes a compilation failure while cross-compiling for ARM.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@40476 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
.. #endif sections. This fixes a build error on NativeClient.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@40103 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (poll.h): already included in ruby/io.h from
thread.c.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@39965 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (gvl_acquire_common): use low priority
notification for avoiding timer thread interval confusion.
If we use timer_thread_pipe[1], every gvl_yield() request
one more gvl_yield(). It lead to thread starvation.
[Bug #7999] [ruby-core:53095]
* thread_pthread.c (rb_reserved_fd_p): adds timer_thread_pipe_low
to reserved fds.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@39686 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
creating communication pipe logic into separate function.
* thread_pthread.c (setup_communication_pipe): new helper function.
* thread_pthread.c (set_nonblock): moves a definition before
setup_communication_pipe.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@39683 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
select(). select doesn't work if timer_thread_pipe[0] is
greater than FD_SETSIZE.
* thread_pthread.c (USE_SLEEPY_TIMER_THREAD): add a dependency
against poll.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@39681 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Specified by the following environment variaables:
- RUBY_THREAD_VM_STACK_SIZE: vm stack size used at thread creation.
default: 128KB (32bit CPU) or 256KB (64bit CPU).
- RUBY_THREAD_MACHINE_STACK_SIZE: machine stack size used at thread
creation. default: 512KB or 1024KB.
- RUBY_FIBER_VM_STACK_SIZE: vm stack size used at fiber creation.
default: 64KB or 128KB.
- RUBY_FIBER_MACHINE_STACK_SIZE: machine stack size used at fiber
creation. default: 256KB or 256KB.
This values are specified at launched timing. You can not change
these values at running time.
Environ variables are only *hints* because:
- They are aligned to 4KB.
- They have minimum values (depend on OSs).
- Machine stack settings are ignored by some OSs.
Default values especially fiber stack sizes are increased.
This change affect Fiber's behavior:
(1) You can run more complex program on a Fiber.
(2) You can not make many (thousands) Fibers because of
lack of address space (on 32bit CPU).
If (2) bothers you,
(a) Use 64bit CPU with big memory, or
(b) Specify RUBY_FIBER_(VM|MACHINE)_STACK_SIZE correctly.
You need to choose correct stack size carefully. These values
are completely rely on systems (OS/compiler and so on).
* vm_core.h (rb_vm_t::default_params): add to record above settings.
* vm.c (RubyVM::DEFAULT_PARAMS): add new constant to see
above setting.
* thread_pthread.c: support RUBY_THREAD_MACHINE_STACK_SIZE.
* cont.c: support RUBY_FIBER_(VM|MACHINE)_STACK_SIZE.
* test/ruby/test_fiber.rb: add tests for above.
* test/ruby/test_thread.rb: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@38478 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
that prevented the ifdef ever being true.
[Bug #7281] [ruby-core:48940]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37483 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
removed HAVE_PTHREAD_CONDATTR_INIT check because this silly
#ifdef makes use-uninitialized-var issue and (2) native_cond_initialize()
already have a right platform and caller don't need any additional care.
[Bug #6825]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37474 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (RUBY_STACK_MIN): may not a compile time constant.
fix r37079. [ruby-dev:46322] [Bug #7247]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37402 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (ruby_init_stack): use getrlimit() for the main
thread on Mac OS X, since pthread_get_stack{addr,size}_np() and
return the default value always, but not the ulimit value.
[ruby-dev:46174] [Bug #7084]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37072 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
after using it. Patch by Stanislav Sedov. Thank you.
[Bug #7041] [ruby-core:47619]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@37001 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (get_stack): define guard only when it is used.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36052 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (timer_thread_sleep): Extracted out a function from
thread_timer(). Added an alternative implementation for platforms
that lacks select(2) or pipe(2).
(rb_thread_create_timer_thread, native_cond_initialize,
native_cond_destroy): Replaced wrong HAVE_XXX checks.
* configure.in (pthread_attr_init): New check.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36022 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (get_stack): seems stack size does not include
guard size on Mac OS X.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36014 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (ruby_init_stack): adjust stack size for offset of
addr from the bottom.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@36013 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (ruby_init_stack): use stack info if possible.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@35978 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in: fix function name to be checked, to initialize
rb_thread_cond_t properly.
* thread_pthread.c (native_cond_initialize, native_cond_destroy):
fix macro name.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@35676 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Patch by Google Inc. [ruby-core:45073].
* configure.in (RUBY_NACL): New M4 func to configure variables for
NaCl.
(RUBY_NACL_CHECK_PEPPER_TYPES): New M4 func to check the old names
of Pepper interface types.
(BTESTRUBY): New variable to specify which ruby should be run on
"make btest". NaCl can run the built binary by sel_ldr, but it need
rbconfig.rb. So this variable is distinguished from $MINIRUBY.
* thread_pthread.c: Disabled some features on NaCl.
* io.c: ditto.
* process.c: ditto.
* signal.c: ditto.
* file.c: ditto.
* missing/flock.c: ditto.
* nacl/pepper_main.c: An example implementation of Pepper application
that embeds Ruby.
* nacl/example.html: An example of web page that uses the Pepper
application.
* nacl/nacl-config.rb: Detects variants of NaCl SDK.
* nacl/GNUmakefile.in: Makefile template for NaCl specific build
process.
* nacl/package.rb: script for packaging a NaCl-Ruby embedding
application.
* nacl/reate_nmf.rb: Wrapper script of create_nmf.py
* dln.c (dln_load): Added a hack to call on NaCl.
* util.c (ruby_getcwd): Path to the current directort is not available
on NaCl.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@35672 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (check_signal_thread_list): add a new function to
check if signal thread list is empty.
* thread_pthread.c (thread_timer): check signal thread list after
timer_thread_function(). main thread might be added into signal thread
list during timer_thread_function().
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@34099 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
only when it is not timer_thread. [Bug #5757] [ruby-dev:44985]
patched by Tomoyuki Chikanaga.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@34038 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (thread_timer): call prctl(PR_SET_NAME) to change
thread name. It may help to debug.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@33912 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
blocking thread.
A patch created by Koichi Sasada. [ruby-core:39634] [Bug #5343]
to cover race condition, timer thread periodically send SIGVTARLM to
threads in signal thread list. so you should activate timer thread
when interrupt a thread.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@33307 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and pthread_cond_broadcast if they return EAGAIN in
native_cond_signal and native_cond_broadcast, respectively.
It is for the pthread implementation of Mac OS X 10.7 (Lion).
fixes#5155. [ruby-dev:44342].
* thread_pthread.c (native_cond_broadcast): ditto.
* thread_pthread.c (struct cached_thread_entry): stop using
pthread_cond_t and its functions directly.
* thread_pthread.c (register_cached_thread_and_wait): ditto.
* thread_pthread.c (use_cached_thread): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32846 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
100,000,000 because Solaris cond_timedwait() return EINVAL if an
argument is greater than current_time + 100,000,000. This is
considered as a kind of spurious wakeup. The caller to native_sleep
should care about spurious wakeup.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32409 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
pthread_attr_getstack() if possible. and, remove an assumption
of stack growing direction.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32403 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
must be the highest address of the current thread's stack.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32395 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
RB_RESERVED_FD_P): added. This C API is to limit to access
fds which are used by RubyVM internal. In this version of
CRuby, return 1 if fd is communication pipe.
If your application needs to close all file descriptors to
preent resource leak, skip internal fds using this C API.
We also define a macro RB_RESERVED_FD_P(fd). So you can write
#ifndef RB_RESERVED_FD_P
#define RB_RESERVED_FD_P(fd) 0
#endif
for Ruby 1.9.2 or previous version to write compatible extensions.
See [ruby-core:37727]
* thread_win32.c (rb_reserved_fd_p): added (return 0 for any fds).
* io.c (rb_io_initialize): raise ArgumentError if given fd is reserved by Ruby.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32394 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
return stack start addres, but stack base address. Thus,
we need to add stack size for getting stack start address.
And, we don't have to decrease guard size twice.
* thread_pthread.c (thread_start_func_1): don't use inaccurate
stack start guess if native_thread_init_stack() can be used.
[Bug #1813] [ruby-core:24540]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32371 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
(we observed that select(2) was canceled by errno=514 on
boron == Linux/Xen environment)
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32325 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
machine stack for the timer thread at least 12KB. FreeBSD 8.2
AMD64 causes machine stack overflow (SIGSEGV) only with
PTHREAD_STACK_MIN (maybe defined as 2KB).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32319 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
communication pipe to avoid timing bug (process termination timing).
The communication pipe will closed by OS.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32276 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
In timer thread, signal handler shoul use it.
The patch is contributed by Eric Wong <normalperson@yhbt.net>.
Refs: [ruby-core:37644] and [ruby-core:37647]
* thread_pthread.c: use rb_async_bug_errno().
And replace all fprintf() to write().
* internal.h (rb_async_bug_errno): add decl. of above func.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32274 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Make "buff" as static. (Maybe) "buff" can be shared between
any caller (any threads) because no one use the read values.
And remove const value "buff_size", and define CCP_READ_BUFF_SIZE
macro.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32266 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
no waiting thread. If there are 2 or more runnable threads,
the timer thread does polling. Avoid polling makes power save
for several computers (0.2W per a Ruby process, when I measured).
If outside-event such as signal or Thread#kill was occuerred
when the timer thread does not do polling, then wake-up
the timer thread using communication-pipe (the timer thread
waits this communication-pipe with select(2)).
The discussion about this modification can be found from the post
[ruby-core:33456] and other related posts.
Note that Eric Wong and KOSAKI Motohiro give us the huge
contributions for this modification. Thanks.
* thread_pthread.c (rb_thread_wakeup_timer_thread): add a function.
This function wakes up the timer thread using communication-pipe.
* thread.c (rb_thread_stop_timer_thread): add a parameter which
specify closing communication-pipe or not.
* thread.c (rb_thread_terminate_all): do not stop timer thread here
(ruby_cleanup() terminate timer thread).
* signal.c: wake up timer thread using
rb_thread_wakeup_timer_thread() from signal handler.
* eval.c (ruby_cleanup): use rb_thread_stop_timer_thread(1).
* process.c: use rb_thread_stop_timer_thread(0)
(reuse communication-pipe).
* thread_win32.c (rb_thread_wakeup_timer_thread): add a dummy
function.
* vm_core.h: add and fix decl. of functions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32244 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c: remove HAVE_GVL_YIELD macro.
* thread_win32.c (gvl_yield): new. this fallback logic was moved from
rb_thread_schedule_rec().
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@32069 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
When native_cond_timedwait() return 0 by spurious wakeup, we
don't have to neither 1) call timer_thread_function and 2)
exit the timer thread.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@31926 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
this is a regression since r31457. [Bug #4808] [ruby-dev:43606]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@31893 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
of malloc.
* thread_pthread.c (remove_signal_thread_list): use xfree instead
of free.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@31474 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
1) we don't have to use #ifdef FOO-PLATFORM directly 2) About
half #ifdef didn't care symbian properly.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@31473 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* thread_pthread.c (native_cond_timeout): new internal api.
it calculate a proper time for argument of native_cond_timedwait().
* thread_win32.c (native_cond_timeout): ditto.
* thread_pthread.c (thread_timer): use native_cond_timeout()
instead of get_ts.
* thread.c (lock_func): ditto.
* thread_pthread.c (get_ts): removed. use native_cond_timeout().
* thread.c (init_lock_timeout): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@31454 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
no longer an alias of pthread_cond_t.
* thread_pthread.c: adapt new rb_thread_cond_t type.
* thread.c (mutex_alloc): ditto.
* thread_win32.c (native_cond_initialize): ditto.
* configure.in: add check for pthread_cond_attr_setclock() and
clockid_t type.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@31451 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We don't have to call mutex_unlock() before initialize it!
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@31384 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
APIs to modularize GVL implementation.
* thread_pthread.c, thread_pthread.h: Two GVL implementations.
(1) Simple locking GVL which is same as existing GVL.
(2) Wake-up queued threads. The wake-up order is simple FIFO.
(We can make several queues to support exact priorities, however
this causes some issues such as priority inversion and so on.)
This impl. prevents spin-loop (*1) caused on SMP environemnts.
*1: Only one Ruby thread acqures GVL again and again.
Bug #2359 [ruby-core:26694]
* thread_win32.c, thread_win32.h: Using simple lock
not by CRITICAL_SECTION but by Mutex.
Bug #3890 [ruby-dev:42315]
* vm.c (ruby_vm_destruct): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@29956 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
must be called even when pthread_getattr_np is used.
[ruby-core:31269]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@28716 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
native_thread_init_stack(th) on cygwin to avoid the segv
introduced by r27789. Cygwin's signal implementation is half
baked so USE_SIGNALSTACK is not defined and it needs another
treatment.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@28507 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Satoshi Shiba <shiba AT rvm.jp> at [ruby-dev:40973].
* gc.h (ruby_get_stack_grow_direction): fixed prototype.
* thread_pthread.c (get_stack, ruby_stack_overflowed_p): both side
should be same type. [Bug #3145]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@27338 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
patched by KOSAKI Motohiro [ruby-dev:40309]
* thread_pthread.c (ruby_init_stack): use get_stack
on platforms which have pthread_attr_get_np.
(FreeBSD, DragonFlyBSD and NetBSD)
This is because FreeBSD and DragonFly BSD must use
pthread_attr_get_np to get stack size of main thread,
but Mac OS X and Linux with LinuxThreads must use getrlimit.
<http://www.nminoru.jp/~nminoru/programming/stackoverflow_handling.html>
<http://d.hatena.ne.jp/nurse/20100204>
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@26572 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to get the stack size of the main thread on FreeBSD.
* thread_pthread.c: include pthread_np.h on FreeBSD.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@26549 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* defs/dtrace.d: new file. defined a dtrace provider "ruby".
* include/ruby/ruby.h (LIKELY): moved from vm.c.
(UNLIKELY): ditto.
(OBJSETUP): probe "object-create".
(RUBY_EVENT_RESCUE): new event.
* vm_exec.c (DEBUG_ENTER_INSN): embeded a probe insn-entry into it.
(DEBUG_END_INSN): insn-return.
* vm.c (LIKELY): moved into ruby.h.
(UNLIKELY): ditto.
(Init_BareVM): embeded a probe "raise" into it.
* variable.c (rb_class2name_without_alloc): new utility function.
* tool/rbinstall.rb (install?(:ext, :arch, :'ext-arch')): installs
dtrace.d if necessary.
* thread_pthread.c (add_signal_thread_list): probe "raise".
(rb_thread_create_timer_thread): ditto.
* thread.c (rb_thread_schedule_rec): probes "thread-enter" and
"thread-leave",
(thread_start_func_2): ditto.
(thread_cleanup_func): probe "thread-term"
* lib/mkmf.rb: supports dtrace postprocessor on making an extension.
* iseq.c (rb_vm_insn_name): new utility function.
(rb_vm_insn_len): ditto.
* insns.def (hook): probes "method-etnry", "method-return", "line",
and "rescue".
* compile.c (iseq_compile_each): adds a trace op for "rescue" probe.
* gc.c (garbage_collect): probes "gc-begin" and "gc-end".
(obj_free): probe "object-free"
(garbage_collect_with_gvl): probe "raise"
(negative_size_allocation_error): ditto.
(rb_memerror): ditto.
* eval.c (rb_rescue2): probe "rescue"
(rb_longjmp): probe "raise"
* ext/probe/probe.c: new extension for application defined probes.
* ext/probe/extconf.rb: ditto.
* configure.in (--with-tracing-model): new option to choose a tracing
mechanism.
(DTRACE): new substitution. name of dtrace(1).
(RUBY_TRACING_MODEL): new substitution.
(DTRACE_OBJ): ditto.
(MINIDTRACE_OBJ): ditto.
(GOLFDTRACE_OBJ): ditto.
(LIBRUBY_DTRACE_OBJ): ditto.
(RUBY_DTRACE_POSTPROCESS): new macro. checks whether the dtrace on
the system needs postprocessing.
(RUBY_DTRACE_BSD_BROKEN): new macro. checks whether the dtrace
supports USDT.
* Makefile.in:
(DTRACE): new variable. name of dtrace(1).
(TRACING_MODEL): new variable. name of the chosen tracing mechanism.
(DTRACE_OBJ): same as the one in configure.in.
(MINIDTRACE_OBJ): ditto.
(GOLFDTRACE_OBJ): ditto.
(LIBRUBY_DTRACE_OBJ): ditto.
(CPPOUTFILE): new substitution. necessary for generating dtrace.d
(trace_none.h): new target for TRACING_MODEL=none
(RUBY_H_INCLUDES): appended a header for tracing.
(distclean-local): also removes preprocessed version of dtrace.d
($(LIBRUBY_A)): needs $(LIBRUBY_DTRACE_OBJ) if dtrace needs
postprocessing.
($(PROGRAM)): ditto.
(golf): ditto.
(miniruby): ditto.
($(arch_hdrdir)/ruby/dtrace.d): new target. preprocessed verson
of defs/dtrace.d. generated if necessary.
($(arch_hdrdir)/ruby/trace_dtrace.h): new target.
definition of probes.
($(LIBRUBY_DTRACE_OBJ)): new target. generated if dtrace needs
postprocessing.
($(DTRACE_OBJ)): ditto.
($(MINIDTRACE_OBJ)): ditto.
($(GOLFDTRACE_OBJ)): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@26235 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* template/known_errors.inc.tmpl: generate defined_error() and
undefined_error() instead of set_syserr.
* error.c (Init_syserr): define defined_error() and undefined_error()
to follow the above change.
(rb_strerrno): defined.
* thread_pthread.c: show error message and errno macro name with
rb_bug.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@25893 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
platforms where PTHREAD_STACK_MIN is not compile time constant.
[ruby-dev:39751]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@25889 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
at fork to get rid of deadlock. based on the patch from Hongli
Lai in [ruby-core:26783]. [ruby-core:26361]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@25843 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
message to stderr instead of using rb_bug().
* KNOWNBUGS.rb, bootstraptest/test_fork.rb: move a fixed test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@23647 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
is in the buffer or not.
* thread_pthread.c (thread_timer): don't exit the loop when signal
is in the buffer. [ruby-dev:37637]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@21265 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
using time slice. if you enable USE_NATIVE_THREAD_PRIORITY
macro, this mechanism is ignored. [ruby-dev:33124]
* thread_pthread.c, thread_win32.c: ditto.
* test/ruby/test_thread.rb: fix test parameter.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@18570 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
some platform. a patch from zunda <zunda616e AT yahoo.co.jp> in
[ruby-dev:32904].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@14815 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
thread_win32.c: make some functions static functions.
a patch from Tadashi Saito <shiba AT mail2.accsnet.ne.jp>
in [ruby-core:14407]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@14657 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
RUBY_VM_SET_TIMER_INTERRUPT(), RUBY_VM_INTERRUPTED().
* thread.c, thread_pthread.c, thread_win32.c: fix to ignore time slice
event until sleep.
* bootstraptest/test_thread.rb: add a test for time limited join test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@14654 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
normal
akr
hsbt
nobu
naruse
ko1
yugui
kosaki
nagachika
okkez
mrkn
kanemoto
mame
usa
azav
matz