This reverts commit 10621f7cb9.
This was reverted because the gc integrity build started failing. We
have figured out a fix so I'm reopening the PR.
Original commit message:
Fix cvar caching when class is cloned
The class variable cache that was added in
ruby#4544 changed the behavior of class
variables on cloned classes. As reported when a class is cloned AND a
class variable was set, and the class variable was read from the
original class, reading a class variable from the cloned class would
return the value from the original class.
This was happening because the IC (inline cache) is stored on the ISEQ
which is shared between the original and cloned class, therefore they
share the cache too.
To fix this we are now storing the `cref` in the cache so that we can
check if it's equal to the current `cref`. If it's different we don't
want to read from the cache. If it's the same we do. Cloned classes
don't share the same cref with their original class.
This will need to be backported to 3.1 in addition to 3.2 since the bug
exists in both versions.
We also added a marking function which was missing.
Fixes [Bug #19379]
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
The class variable cache that was added in
https://github.com/ruby/ruby/pull/4544 changed the behavior of class
variables on cloned classes. As reported when a class is cloned AND a
class variable was set, and the class variable was read from the
original class, reading a class variable from the cloned class would
return the value from the original class.
This was happening because the IC (inline cache) is stored on the ISEQ
which is shared between the original and cloned class, therefore they
share the cache too.
To fix this we are now storing the `cref` in the cache so that we can
check if it's equal to the current `cref`. If it's different we don't
want to read from the cache. If it's the same we do. Cloned classes
don't share the same cref with their original class.
This will need to be backported to 3.1 in addition to 3.2 since the bug
exists in both versions.
We also added a marking function which was missing.
Fixes [Bug #19379]
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
The following code produces two NameErrors respectively
and they are independent, but the second one can show
`private constant` message because of first NameError.
```ruby
class C
class PrivateClass; end
private_constant :PrivateClass
end
begin
eval('class C::PrivateClass; end')
rescue => e
p e
end
begin
Object.const_get 'Foo'
rescue => e
p e
end
#<NameError: private constant C::PrivateClass referenced>
#<NameError: private constant C::Foo referenced>
#=> should be #<NameError: uninitialized constant Foo>
```
It fails the test-all tests with
`make test-all TESTS='ruby/class ruby/parse --seed=58891 -v`.
The reason is clear miss from https://github.com/ruby/ruby/commit/7387c08373a
st tables will maintain insertion order so we can marshal dump / load
objects with instance variables in the same order they were set on that
particular instance
[ruby-core:112926] [Bug #19535]
Co-Authored-By: Jemma Issroff <jemmaissroff@gmail.com>
This makes the behavior of classes and modules when there are too many instance variables match the behavior of objects with too many instance variables.
The following script can sometimes trigger a crash:
```ruby
GC.stress = true
class Array
def foo(bool)
if bool
@a = 1
@b = 2
@c = 1
else
@c = 1
end
end
end
obj = []
obj.foo(true)
obj2 = []
obj2.foo(false)
obj3 = []
obj3.foo(true)
```
This is because vm_setivar_default calls rb_ensure_generic_iv_list_size
to resize the iv list. However, the call to gen_ivtbl_resize reallocs
the iv list, and then inserts into the generic iv table. If the
st_insert triggers a GC then the old iv list will be read during
marking, causing a use-after-free bug.
Co-Authored-By: Jemma Issroff <jemmaissroff@gmail.com>
It's just a decorated st_table, so we call `RB_OBJ_WRITTEN` after
inserting to it.
We also call `RB_OBJ_WRITTEN` on delete for completeness even though
it's a noop.
It's not uncommon for libraries to add thing sinto
autoload that won't necessarily be loaded.
This can cause hundreds or thousands of entries to be
left over in the autoload table, so it's best not to
mark them on every minor.
Right now the attached object is stored as an instance variable
and all the call sites that either get or set it have to know how it's
stored.
It's preferable to hide this implementation detail behind accessors
so that it is easier to change how it's stored.
Instance variables held in gen_ivtbl are marked with rb_gc_mark. It
prevents the referenced objects from moving, which is bad for copying
garbage collectors.
This commit allows those instance variables to be updated during
gc_update_object_references.
This commit moves the classpath (and tmp_classpath) from instance
variables to the rb_classext_t. This improves performance as we no
longer need to set an instance variable when assigning a classpath to
a class.
I benchmarked with the following script:
```ruby
name = :MyClass
puts(Benchmark.measure do
10_000_000.times do |i|
Object.const_set(name, Class.new)
Object.send(:remove_const, name)
end
end)
```
Before this patch:
```
5.440119 0.025264 5.465383 ( 5.467105)
```
After this patch:
```
4.889646 0.028325 4.917971 ( 4.942678)
```
The following script crashes:
```ruby
GC.auto_compact = true
GC.stress = true
class Foo
def initialize
@a = @b = @c = 0
end
def add_ivars
@d = @e = @f = 0
end
end
ary = 1_000.times.map { Foo.new }
ary.each { |f| f.add_ivars }
```
This is because in rb_grow_iv_list, it first calls
rb_ensure_iv_list_size to allocate the buffer (and also unsets the
embed bit) then rb_shape_transition_shape_capa to get the new shape.
However, auto-compact can trigger in rb_shape_transition_shape_capa
which would re-embed the object since it doesn't have the new shape yet.
This causes a crash as the object is now embedded but has a non-embed
shape which would cause the object to have a buffer overrun.
When an object becomes "too complex" (in other words it has too many
variations in the shape tree), we transition it to use a "too complex"
shape and use a hash for storing instance variables.
Without this patch, there were rare cases where shape tree growth could
"explode" and cause performance degradation on what would otherwise have
been cached fast paths.
This patch puts a limit on shape tree growth, and gracefully degrades in
the rare case where there could be a factorial growth in the shape tree.
For example:
```ruby
class NG; end
HUGE_NUMBER.times do
NG.new.instance_variable_set(:"@unique_ivar_#{_1}", 1)
end
```
We consider objects to be "too complex" when the object's class has more
than SHAPE_MAX_VARIATIONS (currently 8) leaf nodes in the shape tree and
the object introduces a new variation (a new leaf node) associated with
that class.
For example, new variations on instances of the following class would be
considered "too complex" because those instances create more than 8
leaves in the shape tree:
```ruby
class Foo; end
9.times { Foo.new.instance_variable_set(":@uniq_#{_1}", 1) }
```
However, the following class is *not* too complex because it only has
one leaf in the shape tree:
```ruby
class Foo
def initialize
@a = @b = @c = @d = @e = @f = @g = @h = @i = nil
end
end
9.times { Foo.new }
``
This case is rare, so we don't expect this change to impact performance
of most applications, but it needs to be handled.
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Cases like this:
```ruby
obj = Object.new
loop do
obj.instance_variable_set(:@foo, 1)
obj.remove_instance_variable(:@foo)
end
```
can cause us to use many more shapes than we want (and even run out).
This commit changes the code such that when an instance variable is
removed, we'll walk up the shape tree, find the shape, then rebuild any
child nodes that happened to be below the "targetted for removal" IV.
This also requires moving any instance variables so that indexes derived
from the shape tree will work correctly.
Co-Authored-By: Jemma Issroff <jemmaissroff@gmail.com>
Co-authored-by: John Hawthorn <jhawthorn@github.com>
This commit significantly speeds up shape transitions as it changes
get_next_shape_internal to not perform a lookup (and instead require
the caller to perform the lookup). This avoids double lookups during
shape transitions.
There is a significant (~2x) speedup in the following micro-benchmark:
puts(Benchmark.measure do
o = Object.new
100_000.times do |i|
o.instance_variable_set(:"@a#{i}", 0)
end
end)
Before:
22.393194 0.201639 22.594833 ( 22.684237)
After:
11.323086 0.022284 11.345370 ( 11.389346)
obj_ivar_set and vm_setivar_slowpath is essentially doing the same thing,
but the code is duplicated and not quite implemented in the same way,
which could cause bugs. This commit refactors vm_setivar_slowpath to use
obj_ivar_set.
We would like to differentiate types of objects via their shape. This
commit adds a special T_OBJECT shape when we allocate an instance of
T_OBJECT. This allows us to avoid testing whether an object is an
instance of a T_OBJECT or not, we can just check the shape.
Since object shapes store the capacity of an object, we no longer
need the numiv field on RObjects. This gives us one extra slot which
we can use to give embedded objects one more instance variable (for a
total of 3 ivs). This commit removes the concept of numiv from RObject.
This commit adds a `capacity` field to shapes, and adds shape
transitions whenever an object's capacity changes. Objects which are
allocated out of a bigger size pool will also make a transition from the
root shape to the shape with the correct capacity for their size pool
when they are allocated.
This commit will allow us to remove numiv from objects completely, and
will also mean we can guarantee that if two objects share shapes, their
IVs are in the same positions (an embedded and extended object cannot
share shapes). This will enable us to implement ivar sets in YJIT using
object shapes.
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Always look up instance variable buffers when iterating. It is possible
for the instance variable buffer to change out from under the object
during iteration, so we cannot cache the buffer on the stack.
In the case of Bug #19095, the transient heap moved the buffer during
iteration:
```
Watchpoint 1 hit:
old value: 0x0000000107c00df8
new value: 0x00000001032743c0
Process 31720 stopped
* thread #1, queue = 'com.apple.main-thread', stop reason = watchpoint 1
frame #0: 0x00000001006e5178 miniruby`rb_obj_transient_heap_evacuate(obj=0x000000010d6b94b0, promote=1) at variable.c:1361:5
1358 }
1359 MEMCPY(new_ptr, old_ptr, VALUE, len);
1360 ROBJECT(obj)->as.heap.ivptr = new_ptr;
-> 1361 }
1362 }
1363 #endif
1364
miniruby`rb_obj_transient_heap_evacuate:
-> 0x1006e5178 <+328>: b 0x1006e517c ; <+332> at variable.c:1362:1
0x1006e517c <+332>: ldp x29, x30, [sp, #0x50]
0x1006e5180 <+336>: add sp, sp, #0x60
0x1006e5184 <+340>: ret
Target 0: (miniruby) stopped.
(lldb) bt
* thread #1, queue = 'com.apple.main-thread', stop reason = watchpoint 1
* frame #0: 0x00000001006e5178 miniruby`rb_obj_transient_heap_evacuate(obj=0x000000010d6b94b0, promote=1) at variable.c:1361:5
frame #1: 0x00000001006cb150 miniruby`transient_heap_block_evacuate(theap=0x0000000100b196c0, block=0x0000000107c00000) at transient_heap.c:734:17
frame #2: 0x00000001006c854c miniruby`transient_heap_evacuate(dmy=0x0000000000000000) at transient_heap.c:808:17
frame #3: 0x00000001007fe6c0 miniruby`rb_postponed_job_flush(vm=0x0000000104402900) at vm_trace.c:1773:21
frame #4: 0x0000000100637a84 miniruby`rb_threadptr_execute_interrupts(th=0x0000000103803bc0, blocking_timing=0) at thread.c:2316:13
frame #5: 0x000000010078b730 miniruby`rb_vm_check_ints(ec=0x00000001048038d0) at vm_core.h:2025:9
frame #6: 0x00000001006fbd10 miniruby`vm_pop_frame(ec=0x00000001048038d0, cfp=0x0000000104a04440, ep=0x0000000104904a28) at vm_insnhelper.c:422:5
frame #7: 0x00000001006fbca0 miniruby`rb_vm_pop_frame(ec=0x00000001048038d0) at vm_insnhelper.c:431:5
frame #8: 0x00000001007d6420 miniruby`vm_call0_cfunc_with_frame(ec=0x00000001048038d0, calling=0x000000016fdcc6a0, argv=0x0000000000000000) at vm_eval.c:153:9
frame #9: 0x00000001007d44cc miniruby`vm_call0_cfunc(ec=0x00000001048038d0, calling=0x000000016fdcc6a0, argv=0x0000000000000000) at vm_eval.c:164:12
frame #10: 0x0000000100766e80 miniruby`vm_call0_body(ec=0x00000001048038d0, calling=0x000000016fdcc6a0, argv=0x0000000000000000) at vm_eval.c:210:15
frame #11: 0x00000001007d76f0 miniruby`vm_call0_cc(ec=0x00000001048038d0, recv=0x000000010d6b49d8, id=2769, argc=0, argv=0x0000000000000000, cc=0x000000010d6b2e58, kw_splat=0) at vm_eval.c:87:12
frame #12: 0x0000000100769e48 miniruby`rb_funcallv_scope(recv=0x000000010d6b49d8, mid=2769, argc=0, argv=0x0000000000000000, scope=CALL_FCALL) at vm_eval.c:1051:16
frame #13: 0x0000000100760a54 miniruby`rb_funcallv(recv=0x000000010d6b49d8, mid=2769, argc=0, argv=0x0000000000000000) at vm_eval.c:1066:12
frame #14: 0x000000010037513c miniruby`rb_inspect(obj=0x000000010d6b49d8) at object.c:633:34
frame #15: 0x000000010002c950 miniruby`inspect_ary(ary=0x000000010d6b4938, dummy=0x0000000000000000, recur=0) at array.c:3091:13
frame #16: 0x0000000100642020 miniruby`exec_recursive(func=(miniruby`inspect_ary at array.c:3084), obj=0x000000010d6b4938, pairid=0x0000000000000000, arg=0x0000000000000000, outer=0, mid=2769) at thread.c:5177:23
frame #17: 0x00000001006412fc miniruby`rb_exec_recursive(func=(miniruby`inspect_ary at array.c:3084), obj=0x000000010d6b4938, arg=0x0000000000000000) at thread.c:5205:12
frame #18: 0x00000001000127f0 miniruby`rb_ary_inspect(ary=0x000000010d6b4938) at array.c:3117:12
```
In general though, any calls back out to the interpreter could change
the IV buffer, so it's not safe to cache.
[Bug #19095]
* Avoid RCLASS_IV_TBL in marshal.c
* Avoid RCLASS_IV_TBL for class names
* Avoid RCLASS_IV_TBL for autoload
* Avoid RCLASS_IV_TBL for class variables
* Avoid copying RCLASS_IV_TBL onto ICLASSes
* Use object shapes for Class and Module IVs
`iv_count` is a misleading name because when IVs are unset, the new
shape doesn't decrement this value. `next_iv_count` is an accurate, and
more descriptive name.
Shapes gives us an almost exact count of instance variables on an
object. Since we know the number of instance variables that have been
set, we will never access slots that haven't been initialized with an
IV.
Shapes provides us with an (almost) exact count of instance variables.
We only need to check for Qundef when an IV has been "undefined"
Prefer to use ROBJECT_IV_COUNT when iterating IVs
Peter Zhu
Benoit Daloze
Nobuyoshi Nakada
Takashi Kokubun
Samuel Williams
eileencodes
Aaron Patterson
S-H-GAMELINKS
Koichi Sasada
HParker
Jean Boussier
John Bampton
Kunshan Wang
lukeg
Jemma Issroff
John Hawthorn