Previously, for statically-linked extensions, we used
`vm->loading_table` to delay calling the init function until the
extensions are required. This caused the extensions to look like they
are in the middle of being loaded even before they're required.
(`rb_feature_p()` returned true with a loading path output.) Combined
with autoload, queries like `defined?(CONST)` and `Module#autoload?`
were confused by this and returned nil incorrectly. RubyGems uses
`defined?` to detect if OpenSSL is available and failed when OpenSSL was
available in builds using `--with-static-linked-ext`.
Use a dedicated table for the init functions instead of adding them to
the loading table. This lets us remove some logic from non-EXTSTATIC
builds.
[Bug #19115]
We need to track this number in CI. It's important to know how changes
to the codebase impact the number of shapes in the system, so lets add
the number to the VM stat hash
The structure and readability of jit_exec is messed up right now. I'd
like to help the current situation by this for now. I'll resurrect
them when I need it again.
This commit adds a `capacity` field to shapes, and adds shape
transitions whenever an object's capacity changes. Objects which are
allocated out of a bigger size pool will also make a transition from the
root shape to the shape with the correct capacity for their size pool
when they are allocated.
This commit will allow us to remove numiv from objects completely, and
will also mean we can guarantee that if two objects share shapes, their
IVs are in the same positions (an embedded and extended object cannot
share shapes). This will enable us to implement ivar sets in YJIT using
object shapes.
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Before object shapes, we were using class serial to invalidate
inline caches. Now that we use shape_id for inline cache keys,
the class serial is unnecessary.
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
This patch pushes dummy frames when loading code for the
profiling purpose.
The following methods push a dummy frame:
* `Kernel#require`
* `Kernel#load`
* `RubyVM::InstructionSequence.compile_file`
* `RubyVM::InstructionSequence.load_from_binary`
https://bugs.ruby-lang.org/issues/18559
Prior to this commit, we were reading and writing ivar index and
shape ID in inline caches in two separate instructions when
getting and setting ivars. This meant there was a race condition
with ractors and these caches where one ractor could change
a value in the cache while another was still reading from it.
This commit instead reads and writes shape ID and ivar index to
inline caches atomically so there is no longer a race condition.
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Co-Authored-By: John Hawthorn <john@hawthorn.email>
Object Shapes is used for accessing instance variables and representing the
"frozenness" of objects. Object instances have a "shape" and the shape
represents some attributes of the object (currently which instance variables are
set and the "frozenness"). Shapes form a tree data structure, and when a new
instance variable is set on an object, that object "transitions" to a new shape
in the shape tree. Each shape has an ID that is used for caching. The shape
structure is independent of class, so objects of different types can have the
same shape.
For example:
```ruby
class Foo
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
class Bar
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
foo = Foo.new # `foo` has shape id 2
bar = Bar.new # `bar` has shape id 2
```
Both `foo` and `bar` instances have the same shape because they both set
instance variables of the same name in the same order.
This technique can help to improve inline cache hits as well as generate more
efficient machine code in JIT compilers.
This commit also adds some methods for debugging shapes on objects. See
`RubyVM::Shape` for more details.
For more context on Object Shapes, see [Feature: #18776]
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Co-Authored-By: Eileen M. Uchitelle <eileencodes@gmail.com>
Co-Authored-By: John Hawthorn <john@hawthorn.email>
Object Shapes is used for accessing instance variables and representing the
"frozenness" of objects. Object instances have a "shape" and the shape
represents some attributes of the object (currently which instance variables are
set and the "frozenness"). Shapes form a tree data structure, and when a new
instance variable is set on an object, that object "transitions" to a new shape
in the shape tree. Each shape has an ID that is used for caching. The shape
structure is independent of class, so objects of different types can have the
same shape.
For example:
```ruby
class Foo
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
class Bar
def initialize
# Starts with shape id 0
@a = 1 # transitions to shape id 1
@b = 1 # transitions to shape id 2
end
end
foo = Foo.new # `foo` has shape id 2
bar = Bar.new # `bar` has shape id 2
```
Both `foo` and `bar` instances have the same shape because they both set
instance variables of the same name in the same order.
This technique can help to improve inline cache hits as well as generate more
efficient machine code in JIT compilers.
This commit also adds some methods for debugging shapes on objects. See
`RubyVM::Shape` for more details.
For more context on Object Shapes, see [Feature: #18776]
Co-Authored-By: Aaron Patterson <tenderlove@ruby-lang.org>
Co-Authored-By: Eileen M. Uchitelle <eileencodes@gmail.com>
Co-Authored-By: John Hawthorn <john@hawthorn.email>
* Simplify around `USE_YJIT` macro
- Use `USE_YJIT` macro only instead of `YJIT_BUILD`.
- An intermediate macro `YJIT_SUPPORTED_P` is no longer used.
* Bail out if YJIT is enabled on unsupported platforms
rb_ary_tmp_new suggests that the array is temporary in some way, but
that's not true, it just creates an array that's hidden and not on the
transient heap. This commit renames it to rb_ary_hidden_new.
This commit prevents the stack from being marked twice: once via the
Fiber, and once via the Thread. It introduces an assertion to assert
that the ec on the thread is the same as the ec on the Fiber being
marked via the thread.
Previously, we didn't pop the frame that runs the TracePoint hook for
b_return events for blocks running as methods (bmethods). In case the
hook raises, that formed an infinite loop during stack unwinding in
hook_before_rewind().
[Bug #18060]
`NON_SCALAR_THREAD_ID` shows `pthread_t` is non-scalar (non-pointer)
and only s390x is known platform. However, the supporting code is
very complex and it is only used for deubg print information.
So this patch removes the support of `NON_SCALAR_THREAD_ID`
and make the code simple.
`rb_thread_t::serial` is auto-incremented serial number for
threads and it can overflow, it means the serial is not a ID
for each thread, it is only for debug print.
`RUBY_DEBUG_LOG` shows this information.
Also skip EC related information if EC is NULL. This patch
enable to use `RUBY_DEBUG_LOG` without setup EC.
In December 2021, we opened an [issue] to solicit feedback regarding the
porting of the YJIT codebase from C99 to Rust. There were some
reservations, but this project was given the go ahead by Ruby core
developers and Matz. Since then, we have successfully completed the port
of YJIT to Rust.
The new Rust version of YJIT has reached parity with the C version, in
that it passes all the CRuby tests, is able to run all of the YJIT
benchmarks, and performs similarly to the C version (because it works
the same way and largely generates the same machine code). We've even
incorporated some design improvements, such as a more fine-grained
constant invalidation mechanism which we expect will make a big
difference in Ruby on Rails applications.
Because we want to be careful, YJIT is guarded behind a configure
option:
```shell
./configure --enable-yjit # Build YJIT in release mode
./configure --enable-yjit=dev # Build YJIT in dev/debug mode
```
By default, YJIT does not get compiled and cargo/rustc is not required.
If YJIT is built in dev mode, then `cargo` is used to fetch development
dependencies, but when building in release, `cargo` is not required,
only `rustc`. At the moment YJIT requires Rust 1.60.0 or newer.
The YJIT command-line options remain mostly unchanged, and more details
about the build process are documented in `doc/yjit/yjit.md`.
The CI tests have been updated and do not take any more resources than
before.
The development history of the Rust port is available at the following
commit for interested parties:
1fd9573d8b
Our hope is that Rust YJIT will be compiled and included as a part of
system packages and compiled binaries of the Ruby 3.2 release. We do not
anticipate any major problems as Rust is well supported on every
platform which YJIT supports, but to make sure that this process works
smoothly, we would like to reach out to those who take care of building
systems packages before the 3.2 release is shipped and resolve any
issues that may come up.
[issue]: https://bugs.ruby-lang.org/issues/18481
Co-authored-by: Maxime Chevalier-Boisvert <maximechevalierb@gmail.com>
Co-authored-by: Noah Gibbs <the.codefolio.guy@gmail.com>
Co-authored-by: Kevin Newton <kddnewton@gmail.com>
`rb_thread_t` contained `native_thread_data_t` to represent
thread implementation dependent data. This patch separates
them and rename it `rb_native_thread` and point it from
`rb_thraed_t`.
Now, 1 Ruby thread (`rb_thread_t`) has 1 native thread (`rb_native_thread`).
Not sure if this is the correct fix. It does raise LocalJumpError in
the yielding thread as you would expect, but the value yielded to the calling
thread is still yielded without an exception.
Fixes [Bug #18649]
Check whether the current or previous frame is a Ruby frame in
call_trace_func and rb_tracearg_binding before attempting to
create a binding for the frame.
Fixes [Bug #18487]
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
Before the new constant cache behavior, caches were invalidated by a
single global variable. You could inspect the value of this variable
with RubyVM.stat(:global_constant_state). This was mostly useful to
verify the behavior of the VM or to test constant loading like in Rails.
With the new constant cache behavior, we introduced
RubyVM.stat(:constant_cache) which returned a hash with symbol keys and
integer values that represented the number of live constant caches
associated with the given symbol. Additionally, we removed the old
RubyVM.stat(:global_constant_state).
This was proven to be not very useful, so it doesn't help you diagnose
constant loading issues. So, instead we added the global constant state
back into the RubyVM output. However, that number can be misleading as
now when you invalidate something like `Foo::Bar::Baz` you're actually
invalidating 3 different lists of inline caches.
This commit attempts to get the best of both worlds. We remove
RubyVM.stat(:global_constant_state) like we did originally, as it
doesn't have the same semantic meaning and it could be confusing going
forward. Instead we add RubyVM.stat(:constant_cache_invalidations) and
RubyVM.stat(:constant_cache_misses). These two metrics should provide
enough information to diagnose any constant loading issues, as well as
provide a replacement for the old global constant state.
This was removed as part of [Feature #18589]. But some applications were relying on this behavior. So bringing this back to make it better for backward compatibility going forward.
This commit reintroduces finer-grained constant cache invalidation.
After 8008fb7 got merged, it was causing issues on token-threaded
builds (such as on Windows).
The issue was that when you're iterating through instruction sequences
and using the translator functions to get back the instruction structs,
you're either using `rb_vm_insn_null_translator` or
`rb_vm_insn_addr2insn2` depending if it's a direct-threading build.
`rb_vm_insn_addr2insn2` does some normalization to always return to
you the non-trace version of whatever instruction you're looking at.
`rb_vm_insn_null_translator` does not do that normalization.
This means that when you're looping through the instructions if you're
trying to do an opcode comparison, it can change depending on the type
of threading that you're using. This can be very confusing. So, this
commit creates a new translator function
`rb_vm_insn_normalizing_translator` to always return the non-trace
version so that opcode comparisons don't have to worry about different
configurations.
[Feature #18589]
This reverts commits for [Feature #18589]:
* 8008fb7352
"Update formatting per feedback"
* 8f6eaca2e1
"Delete ID from constant cache table if it becomes empty on ISEQ free"
* 629908586b
"Finer-grained inline constant cache invalidation"
MSWin builds on AppVeyor have been crashing since the merger.
Check whether the current or previous frame is a Ruby frame in
call_trace_func before attempting to create a binding for the frame.
Fixes [Bug #18487]
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
Current behavior - caches depend on a global counter. All constant mutations cause caches to be invalidated.
```ruby
class A
B = 1
end
def foo
A::B # inline cache depends on global counter
end
foo # populate inline cache
foo # hit inline cache
C = 1 # global counter increments, all caches are invalidated
foo # misses inline cache due to `C = 1`
```
Proposed behavior - caches depend on name components. Only constant mutations with corresponding names will invalidate the cache.
```ruby
class A
B = 1
end
def foo
A::B # inline cache depends constants named "A" and "B"
end
foo # populate inline cache
foo # hit inline cache
C = 1 # caches that depend on the name "C" are invalidated
foo # hits inline cache because IC only depends on "A" and "B"
```
Examples of breaking the new cache:
```ruby
module C
# Breaks `foo` cache because "A" constant is set and the cache in foo depends
# on "A" and "B"
class A; end
end
B = 1
```
We expect the new cache scheme to be invalidated less often because names aren't frequently reused. With the cache being invalidated less, we can rely on its stability more to keep our constant references fast and reduce the need to throw away generated code in YJIT.
Use ISEQ_BODY macro to get the rb_iseq_constant_body of the ISeq. Using
this macro will make it easier for us to change the allocation strategy
of rb_iseq_constant_body when using Variable Width Allocation.
the original rb_wasm_setjmp implementation always unwinds to the root
call frame to have setjmp compatible interface, and simulate sjlj's
undefined behavior. Therefore, every vm_exec call unwinds to main, and
a deep call stack makes setjmp call very expensive. The following
snippet from optcarrot takes 5s even though it takes less than 0.3s on
native.
```
[0x0, 0x4, 0x8, 0xc].map do |attr|
(0..7).map do |j|
(0...0x10000).map do |i|
clr = i[15 - j] * 2 + i[7 - j]
clr != 0 ? attr | clr : 0
end
end
end
```
This patch adds a WASI specialized vm_exec which uses lightweight
try-catch API without unwinding to the root frame. After this patch, the
above snippet takes only 0.5s.
Currently the calculation only counts the size of the struct. This commit adds the size of the associated st tables, id tables, and linked lists.
Still missing is the size of the ractors and (potentially) the size of the object space.
Alan Wu
Aaron Patterson
S-H-GAMELINKS
Takashi Kokubun
Jemma Issroff
Nobuyoshi Nakada
Koichi Sasada
Peter Zhu
Yusuke Endoh
Samuel Williams
Alan Wu
Jeremy Evans
Kevin Newton
Yuta Saito
Kazuhiro NISHIYAMA