This is an internal only function not exposed to the C extension API.
It's only use so far is from rb_vm_mark, where it's used to mark the
values in the vm->trap_list.cmd array.
There shouldn't be any reason why these cannot move.
This commit allows them to move by updating their references during the
reference updating step of compaction.
To do this we've introduced another internal function
rb_gc_update_values as a partner to rb_gc_mark_values.
This allows us to refactor rb_gc_mark_values to not pin
Revert "Revert "Skip calling jit_exec on Wasm""
This reverts commit 2e94610f70.
It's not about whether it's optimized away or not. I just don't want to
leave and maintain the callsite (e.g. signature) in the path where
YJIT is never built.
This reverts commit e80752f9bb.
RJIT and YJIT are never enabled on Wasm. When both are disabled,
`jit_exec` is defined to return `Qundef` constantly, and is optimized
away.
We often break Wasm build when we modify how jit_exec works. I'm
planning to modify it again soon.
We actually don't support running Ruby JIT on Wasm, so it doesn't seem
worth the maintenance effort.
Remove rb_control_frame_t::__bp__ and optimize bmethod calls
This commit removes the __bp__ field from rb_control_frame_t. It was
introduced to help MJIT, but since MJIT was replaced by RJIT, we can use
vm_base_ptr() to compute it from the SP of the previous control frame
instead. Removing the field avoids needing to set it up when pushing new
frames.
Simply removing __bp__ would cause crashes since RJIT and YJIT used a
slightly different stack layout for bmethod calls than the interpreter.
At the moment of the call, the two layouts looked as follows:
┌────────────┐ ┌────────────┐
│ frame_base │ │ frame_base │
├────────────┤ ├────────────┤
│ ... │ │ ... │
├────────────┤ ├────────────┤
│ args │ │ args │
├────────────┤ └────────────┘<─prev_frame_sp
│ receiver │
prev_frame_sp─>└────────────┘
RJIT & YJIT interpreter
Essentially, vm_base_ptr() needs to compute the address to frame_base
given prev_frame_sp in the diagrams. The presence of the receiver
created an off-by-one situation.
Make the interpreter use the layout the JITs use for iseq-to-iseq
bmethod calls. Doing so removes unnecessary argument shifting and
vm_exec_core() re-entry from the interpreter, yielding a speed
improvement visible through `benchmark/vm_defined_method.yml`:
patched: 7578743.1 i/s
master: 4796596.3 i/s - 1.58x slower
C-to-iseq bmethod calls now store one more VALUE than before, but that
should have negligible impact on overall performance.
Note that re-entering vm_exec_core() used to be necessary for firing
TracePoint events, but that's no longer the case since
9121e57a5f.
Closesruby/ruby#6428
Introduce Universal Parser mode for the parser.
This commit includes these changes:
* Introduce `UNIVERSAL_PARSER` macro. All of CRuby related functions
are passed via `struct rb_parser_config_struct` when this macro is enabled.
* Add CI task with 'cppflags=-DUNIVERSAL_PARSER' for ubuntu.
After [1], using ext/Setup to link some, but not all extensions failed
during linking. I did not know about this option, and had assumed that
only `--with-static-linked-ext` builds can include statically linked
extensions.
Include the support code for statically linked extensions in all
configurations like before [1]. Initialize the table lazily to minimize
footprint on builds that have no statically linked extensions.
[1]: 790cf4b6d0 "Fix autoload status of
statically linked extensions"
Originally, when 2e7bceb34e fixed cfuncs to no
longer use the VM stack for large array splats, it was thought to have fully
fixed Bug #4040, since the issue was fixed for methods defined in Ruby (iseqs)
back in Ruby 2.2.
After additional research, I determined that same issue affects almost all
types of method calls, not just iseq and cfunc calls. There were two main
types of remaining issues, important cases (where large array splat should
work) and pedantic cases (where large array splat raised SystemStackError
instead of ArgumentError).
Important cases:
```ruby
define_method(:a){|*a|}
a(*1380888.times)
def b(*a); end
send(:b, *1380888.times)
:b.to_proc.call(self, *1380888.times)
def d; yield(*1380888.times) end
d(&method(:b))
def self.method_missing(*a); end
not_a_method(*1380888.times)
```
Pedantic cases:
```ruby
def a; end
a(*1380888.times)
def b(_); end
b(*1380888.times)
def c(_=nil); end
c(*1380888.times)
c = Class.new do
attr_accessor :a
alias b a=
end.new
c.a(*1380888.times)
c.b(*1380888.times)
c = Struct.new(:a) do
alias b a=
end.new
c.a(*1380888.times)
c.b(*1380888.times)
```
This patch fixes all usage of CALLER_SETUP_ARG with splatting a large
number of arguments, and required similar fixes to use a temporary
hidden array in three other cases where the VM would use the VM stack
for handling a large number of arguments. However, it is possible
there may be additional cases where splatting a large number
of arguments still causes a SystemStackError.
This has a measurable performance impact, as it requires additional
checks for a large number of arguments in many additional cases.
This change is fairly invasive, as there were many different VM
functions that needed to be modified to support this. To avoid
too much API change, I modified struct rb_calling_info to add a
heap_argv member for storing the array, so I would not have to
thread it through many functions. This struct is always stack
allocated, which helps ensure sure GC doesn't collect it early.
Because of how invasive the changes are, and how rarely large
arrays are actually splatted in Ruby code, the existing test/spec
suites are not great at testing for correct behavior. To try to
find and fix all issues, I tested this in CI with
VM_ARGC_STACK_MAX to -1, ensuring that a temporary array is used
for all array splat method calls. This was very helpful in
finding breaking cases, especially ones involving flagged keyword
hashes.
Fixes [Bug #4040]
Co-authored-by: Jimmy Miller <jimmy.miller@shopify.com>
This commit introduces a new instruction `opt_newarray_send` which is
used when there is an array literal followed by either the `hash`,
`min`, or `max` method.
```
[a, b, c].hash
```
Will emit an `opt_newarray_send` instruction. This instruction falls
back to a method call if the "interested" method has been monkey
patched.
Here are some examples of the instructions generated:
```
$ ./miniruby --dump=insns -e '[@a, @b].max'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,12)> (catch: FALSE)
0000 getinstancevariable :@a, <is:0> ( 1)[Li]
0003 getinstancevariable :@b, <is:1>
0006 opt_newarray_send 2, :max
0009 leave
$ ./miniruby --dump=insns -e '[@a, @b].min'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,12)> (catch: FALSE)
0000 getinstancevariable :@a, <is:0> ( 1)[Li]
0003 getinstancevariable :@b, <is:1>
0006 opt_newarray_send 2, :min
0009 leave
$ ./miniruby --dump=insns -e '[@a, @b].hash'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,13)> (catch: FALSE)
0000 getinstancevariable :@a, <is:0> ( 1)[Li]
0003 getinstancevariable :@b, <is:1>
0006 opt_newarray_send 2, :hash
0009 leave
```
[Feature #18897] [ruby-core:109147]
Co-authored-by: John Hawthorn <jhawthorn@github.com>
Rebuilding the loaded feature index slowed down with the bug fix
for #17885 in 79a4484a07. The
slowdown was extreme if realpath emulation was used, but even when
not emulated, it could be about 10x slower.
This adds loaded_features_realpath_map to rb_vm_struct. This is a
hidden hash mapping loaded feature paths to realpaths. When
rebuilding the loaded feature index, look at this hash to get
cached realpath values, and skip calling rb_check_realpath if a
cached value is found.
Fixes [Bug #19246]
Show native thread's serial on `RUBY_DEBUG_LOG`.
`nt->serial` is also stored into `ruby_nt_serial` if the compiler
supports `RB_THREAD_LOCAL_SPECIFIER`.
C function frames don't need to use the VM-specific pc field to run
properly. When pushing a control frame from output code, save one
instruction by leaving the field uninitialized.
Fix-up rb_vm_svar_lep(), which is used while setting local variables via
Regexp#=~. Use cfp->iseq as a secondary signal so it can stop assuming
that all CFUNC frames always have zero pc's.
* YJIT: Add --yjit-pause and RubyVM::YJIT.resume
This allows booting YJIT in a suspended state. We chose to add a new
command line option as opposed to simply allowing YJIT.resume to work
without any command line option because it allows for combining with
YJIT tuning command line options. It also simpifies implementation.
Paired with Kokubun and Maxime.
* Update yjit.rb
Co-authored-by: Takashi Kokubun <takashikkbn@gmail.com>
---------
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
Co-authored-by: Takashi Kokubun <takashikkbn@gmail.com>
We can only allocate enough shapes to fit in the shape buffer.
MAX_SHAPE_ID was based on the theoretical maximum number of shapes we
could have, not on the amount of memory we can actually consume. This
commit changes the MAX_SHAPE_ID to be based on the amount of memory
we're allowed to consume.
Co-Authored-By: Jemma Issroff <jemmaissroff@gmail.com>
* Revert "Remove special handling of `SIGCHLD`. (#7482)"
This reverts commit 44a0711eab.
* Revert "Remove prototypes for functions that are no longer used. (#7497)"
This reverts commit 4dce12bead.
* Revert "Remove SIGCHLD `waidpid`. (#7476)"
This reverts commit 1658e7d966.
* Fix change to rjit variable name.
We used to require MJIT is supported when YJIT is supported. However,
now that RJIT dropped some platforms that YJIT supports, it no longer
makes sense. We should be able to enable only YJIT, and vice versa.
Right now the attached object is stored as an instance variable
and all the call sites that either get or set it have to know how it's
stored.
It's preferable to hide this implementation detail behind accessors
so that it is easier to change how it's stored.
This patch is follo-up of 0a82bfe.
Without this patch, if env is escaped (Proc'ed), strange svar
can be touched.
This patch tracks escaped env and use it.
Matt Valentine-House
Alan Wu
Jean Boussier
Takashi Kokubun
Nobuyoshi Nakada
Maxime Chevalier-Boisvert
yui-knk
Peter Zhu
Jeremy Evans
Aaron Patterson
Koichi Sasada
Samuel Williams
Jean Boussier