* ext/openssl/ossl_ssl.c (ossl_ssl_tmp_key): Access to ephemeral
TLS session key in case of forward secrecy cipher. Only
available since OpenSSL 1.0.2. [Fix GH-1318]
* ext/openssl/extconf.rb: Check for SSL_get_server_tmp_key.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54485 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_vm_struct): make at_exit a single linked list but
not RArray, not to mark the registered functions by the write
barrier. based on the patches by Evan Phoenix.
[ruby-core:73908] [Bug #12095]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54484 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
RUBY_GC_HEAP_FREE_SLOTS_MIN_RATIO 0.3 -> 0.2
RUBY_GC_HEAP_FREE_SLOTS_MAX_RATIO 0.8 -> 0.65
These values are same as Ruby 2.0.0.
This change cause GC counts.
However, generational GC reduced each (minor) GC time and
increase memory locality. So that not so big impact on my
benchmarking results.
(surprizingly, this fix speed up programs on some cases)
You can change these values by environment variables
if you feel wrong.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54482 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
And also take an accept_zero flag which allow to accept zero
even if lower_bound is set.
* gc.c (ruby_gc_set_params): fix parameters.
RUBY_GC_HEAP_FREE_SLOTS_MAX_RATIO set 0.9 as *lower_bound*, so that
it should be upper_bound.
Set RUBY_GC_HEAP_FREE_SLOTS_MIN_RATIO as lower bound.
Also set lower/upper bound of RUBY_GC_HEAP_FREE_SLOTS_GOAL_RATIO to
RUBY_GC_HEAP_FREE_SLOTS_MIN/MAX_RATIO.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54481 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* numeric.c (flodivmod): round division if it is a finite number
and module is required.
* numeric.c (dbl2ival): do not round here.
* numeric.c (flo_ceil): use dbl2ival.
* numeric.c (flo_round): round explicitly.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54477 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
swapcase functionality for titlecase characters. Swapcase isn't defined
by Unicode, because the purpose/usage of swapcase is unclear anyway.
The implementation follows a proposal from Nobu, swaping the case of
each component of a titlecase character individually.
This means that the titlecase characters have to be decomposed.
* enc/unicode.c: Code using the above data.
* test/ruby/enc/test_case_mapping.rb: Tests for the above.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54469 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.in (AC_CONFIG_FILES): $srcdir/.git can be a file pointing
the real git_dir, such as when the git working tree is a "linked
working tree" (a working tree created by git-worktree). So use
git-rev-parse --git-dir to check if $srcdir is the top-level of a git
repository, not just checking if the $srcdir/.git directory does exist
or not. [ruby-core:74759] [Bug #12239]
* tool/change_maker.rb: use tool/vcs.rb to detect VCS. This used to have
its own VCS detection code, while we have tool/vcs.rb.
* tool/vcs.rb (detect): remove code duplication
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54468 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
By setting the SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER flag.
This flag was introduced at the same time as
SSL_MODE_ENABLE_PARTIAL_WRITE in OpenSSL 0.9.4 and makes usage
with non-blocking sockets much easier.
Before this, a Rubyist would need to remember the exact object
which failed to write and reuse it later when the socket became
writable again. This causes problems when the buffer is given
by another layer of the application (e.g. a buffer is given
by a Rack middleware or application to a Rack web server).
* ext/openssl/ossl_ssl.c (ossl_sslctx_s_alloc):
enable SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER by default
[Bug #12126]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54466 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Introduce new environement variable
GC_HEAP_FREE_SLOTS_GOAL_RATIO (goal_ratio) to calculate the ratio
of additional memory.
Before this change, we add pages with the following formula
(when free_slots < total_pages * RUBY_GC_HEAP_FREE_SLOTS_MIN_RATIO):
next_pages = total_pages * RUBY_GC_HEAP_GROWTH_FACTOR
This addition can allocate too much.
With this change, we increase pages to satisfy the following formula:
next_free_slots = next_total_slots * goal_ratio
where
next_free_slots = free_slots + adding_slots
next_total_slots = total_slots + adding_slots.
If you want to prepare many free slots, increase this ratio.
If this variable is 0, then simply multiply
RUBY_GC_HEAP_GROWTH_FACTOR.
* gc.c (get_envparam_double): enable to accept 0.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54453 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Before this change, heap_pages_min_slots are calculated at the
beggining sweeping phase. And this value is used at the end of
*next* marking phase.
To simplify it, we use this value at the end of this marking phase.
It means that we don't need to store this value as global state.
Also heap_pages_max_slots is calculated at the begging of sweeping
phase and used at the end of sweeping phase.
To simplify this logic, we introduced new global value
heap_pages_freeable_pages it means extra pages count we can free.
gc_sweep_step() checks this value and moves empty pages to tomb_heap
not more than this value.
Because of this fix, heap_pages_swept_slots is no longer needed.
* gc.c (rb_objspace_t::heap_pages): restruct the objspace global
status.
remove the following fileds
* swept_slots (and heap_pages_swept_slots)
* min_free_slots (and heap_pages_min_free_slots)
* max_free_slots (and heap_pages_max_free_slots)
And add the following filed.
* freeable_pages (and heap_pages_freeable_pages)
* gc.c (heap_pages_free_unused_pages): unlink tomb heap pages
because tomb heap should have only freeable pages.
* gc.c (heap_extend_pages): add parameters for future extension.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54451 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* RUBY_GC_HEAP_FREE_SLOTS_MIN_RATIO:
allocate additional pages when free slots is lower than
the value (total_slots * (this ratio)).
* RUBY_GC_HEAP_FREE_SLOTS_MAX_RATIO:
allow to free pages when free slots is greater thatn
the value (total_slots * (this ratio)).
Before this change, these values are hard coded.
* gc.c (ruby_gc_params_t): ditto.
* gc.c (ruby_gc_set_params): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54450 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* gc.c (gc_sweep_step): use returned free slots count.
* gc.c (gc_sweep_step): change variable name `next'
to `next_sweep_page'.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54447 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* ext/date/date_core.c (d_lite_strftime, dt_lite_strftime): [DOC]
fix indent not to be a big sole verbatim.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54445 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* extension.rdoc, extension.ja.rdoc: [DOC] Fix some errors.
Renamed files, wrong method names or argument types; the example
GetDBM macro is now updated to the current version of the actual
code. patch by Marcus Stollsteimer in [ruby-core:74690].
[Bug #12228]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54434 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_isalnum, rb_isxdigit, rb_isblank, rb_isspace, rb_isblank,
rb_iscntrl, rb_isprint, rb_ispunct, rb_isgraph,
rb_tolower, rb_toupper): use inline function to avoid function call.
* include/ruby/ruby.h (rb_isascii): use inline function to clarify
the logic.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54391 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* tool/redmine-backporter.rb (show): show current issue again if no
ticket number is given.
* tool/redmine-backporter.rb (rel): show error message if current
bugs.ruby-lang.org doesn't support the API.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54390 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
special cases in CaseUnfold_11_Table.
* enc/unicode.c: Adjustments for above.
* test/ruby/enc/test_case_mapping.rb: Tests for the above: Some tests in
test_titlecase activated; test_greek added. A test in test_cherokee fixed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54383 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
override the body more easily. [fix GH-1307]
* test/webrick/test_httpresponse.rb: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54346 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* error.c (rb_compile_err_append): rb_thread_t::base_block is no
longer used.
* iseq.c (rb_iseq_compile_with_option): ditto, no protection is
needed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54345 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (struct parser_params): move parse_in_eval flag from
rb_thread_t.
* parse.y (rb_parser_set_context): set parsing context, not only
mild error flag.
* iseq.c (rb_iseq_compile_with_option): the parser now refers no
thread local states to be restored.
* vm_eval.c (eval_string_with_cref): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54343 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* sprintf.c (rb_str_format): refactor floating point format of
Rational by using gereric Integer functions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54306 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* sprintf.c (rb_str_format): fix buffer overflow, length must be
greater than precision. reported by William Bowling <will AT
wbowling.info>.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54304 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* sprintf.c (rb_str_format): convert Rational to floating point
format by using gereric Integer functions, not by methods which
can be overwritten.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54302 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* numeric.c (rb_int2str): conversion function to String for
generic Integer.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54298 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
naruse
kazu
nobu
svn
ko1
duerst
normal
eregon
hsbt