As a comment token includes the newline, so delayed newline token
just follows it should not be dispatched. [Bug #11485]
Co-Authored-By: Jeremy Evans <code@jeremyevans.net>
* parse.y (value_expr_check): if either of `then` or `else`
statements is not a void value expression, the whole `if` is not
also a void value expression. [Bug #15932]
* string.c (str_replace_shared_without_enc): free previous buffer
before replaced.
* parse.y (gettable): make sure in advance that the `__FILE__`
object shares a fstring, to get rid of replacement with the
fstring later.
TODO: this hack may be needed in other places.
[Bug #15916]
Co-Authored-By: luke-gru (Luke Gruber) <luke.gru@gmail.com>
`(ID)1` was assigned to NODE_ARGS#rest_arg for `{|x,| }`.
This change removes the magic number by introducing an explicit macro
variable for it: NODE_SPECIAL_EXCESSED_COMMA.
Terminate the input from a TTY by 2 ^D at the middle of line, like
as many programs, `cat`, `perl` and so on, do. By the first ^D,
the line will be sent without a newline, and then EOF will be send
by the next ^D.
* parse.y (here_document): broke the terminator condition down
into each piece, the positional condition, resetting the
dedented here-document indentation, and matching identifier.
suppress a false warning by icc.
Heredocs are parsed line-by-line, so we need to keep track of the
temporary encoding of the string. Previously, a heredoc would
only detect mixed encoding errors if they were on the same line,
this changes things so they will be caught on different lines.
Fixes [Bug #15839]
This allows cases such as:
```ruby
m ->(a = ->{@1}) {a}
m.call.call(1)
m2 ->(a: ->{@1}) {a}
m2.call.call(2)
```
Previously, this would cause a syntax error.
[Bug#15789]
Because `proc{|| @1}` is a syntax error, the following should
also be syntax errors:
```ruby
proc { |
| @1}
```
```ruby
proc { |; a| @1 }
```
This fixes both cases.
[Bug #15825]
* parse.y (heredoc_identifier): CR in here-document identifier
might or might not result in a syntax error, by the EOL code.
make a syntax error regardless of the EOL code.
* parse.y (heredoc_identifier): quoted here-document identifier
must end within the same line.
the only corner case that here-document identifier can contain a
newline is that the closing qoute is placed at the beginning of
the next line, and has been warned since 2.4.
```ruby
<<"EOS
" # warning: here document identifier ends with a newline
EOS
```
* parse.y (internal_id): number the ID serial for internal use by
counting down from the neary maximum value, not to accidentally
match permanent IDs.
[Bug #15768]
* parse.y (parser_append_options): explicitly pass $; when auto
splitting, to suppress the warning for non-nil $;.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67608 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (rb_parser_fatal): fix "parser" in the message which was
replaced accidentally. it is not the argument name.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67503 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Because hard to specify commits related to r67479 only.
So please commit again.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67499 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (rb_parser_fatal): fix "parser" in the message which was
replaced accidentally. it is not the argument name.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67492 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y: show compile error and the error line separately,
instead of building the error message by snprintf then yyerror.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67358 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (parser_token_value_print): in ripper, ID values are
wrapped in NODE_RIPPER at set_yylval_name(), so print the Symbol
wrapped together.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67305 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (lambda): support numbered parameters, only when no
argument list including empty parentheses, like empty vertical
bars. [ruby-core:91859] [Bug #15672]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67295 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (set_yylval_noname): continue after an invalid global,
instance, class variable name, without "unexpected end-of-file"
error.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67292 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (parser_numbered_param): hoisted out the contextual
check for numbered parameters.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67289 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (parse_atmark): exclude punctuation follows @ marks,
whereas it is inclusive after $ mark as some punctuation global
variables exist.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67254 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (parse_gvar): show the source line erred by invalid
global variable, and indicate the variable including the wrong
punctuation.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67251 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (ruby_show_error_line): hoisted out from parser_yyerror.
* parse.y (regx_options): revert r67226 and show the error line
separately.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67250 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (parser_yyerror): trim a newline at the end of the erred
code which was replaced with an extra space in the succeeding
cursor line.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66927 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (parse_string): bail out when word-list meets end of
input not to show an extra "unexpected" error message after the
preceding error.
$ ruby -e "%w["
-e:1: unterminated string meets end of file
-e:1: syntax error, unexpected terminator, expecting ' '
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66918 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
yystpcpy is always used by yysyntax_error in bison 2.3, but may
not used by other than yytnamerr in newer bison.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66905 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (rb_yytnamerr): strip enclosing double-quotes, same as
the default yytnamerr except for that single-quotes matching
back-quotes do not stop stripping.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66903 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (symbol): turned into a node, as well as `numeric`, for
a symbol literal, and includes `dsym` now.
* parse.y (ssym): previous `symbol`. renamed as the counterpart
of `dsym`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66724 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y: refine error messages for tSYMBEG and tSTRING_BEG, which
can appear at invalid places.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66722 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y: Fix the beginning position of trailing NODE_UNDEF.
e.g. The location of the NODE_UNDEF for `b` is fixed:
```
undef a, b
```
* Before
```
NODE_UNDEF (line: 1, location: (1,6)-(1,10))
```
* After
```
NODE_UNDEF (line: 1, location: (1,9)-(1,10))
```
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65973 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
which usually refers ruby_sourcefile_string and is not freed
directly.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65655 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (heredoc_dedent): manage the last node of NODE_ARRAY,
when concatenating dedented literals.
[ruby-core:89649] [Bug #15272]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65467 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (command): set the last location from the location
managed by bison, so that other nodes are not needed.
[ruby-core:89648] [Bug #15271]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65460 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
You can now write the following without warning.
user = User.all.find {|user| cond(user) }
Fixes [Feature #12490].
A patch from Soutaro Matsumoto <matsumoto@soutaro.com>.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65369 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
You can now write the following without warning.
user = User.all.find {|user| cond(user) }
Fixes [Feature #12490].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65367 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y: Fix to start with the argument.
e.g. The locations of the NODE_SCOPE is fixed:
```
-> x { 1 + 2 }
```
* Before
```
NODE_SCOPE (line: 1, location: (1,2)-(1,14))
```
* After
```
NODE_SCOPE (line: 1, location: (1,3)-(1,14))
```
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65227 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* node.h: Add `nd_first_loc` and `nd_set_first_loc`
* parse.y: Fix to start with the beginning of `->` .
e.g. The locations of the NODE_LAMBDA is fixed:
```
-> x { 1 + 2 }
```
* Before
```
NODE_LAMBDA (line: 1, location: (1,2)-(1,14))
```
* After
```
NODE_LAMBDA (line: 1, location: (1,0)-(1,14))
```
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65221 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (arg_blk_pass): preceeding arguments node may be NULL when
an empty keyword argument hash splat is optimized away.
[ruby-core:88890] [Bug #15087]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64786 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Because of the lack of this case, `[*ary,1,2,3,4,5,6]` was parsed into
an inefficient AST like `ary + [1,2] + [3,4] + [5,6]`.
A patch from Anmol Chopra <anmolchopra@rocketbox.in>.
Fixes [Bug #15018].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64510 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The code fragments that initializes coverage data were scattered into
both parse.y and compile.c. parse.y allocated a coverage data, and
compile.c initialize the data.
To remove this cross-cutting concern, this change moves the allocation
from "coverage" function of parse.y to "rb_iseq_new_top" of iseq.c.
For the sake, parse.y just counts the line number of the original source
code, and the number is passed via rb_ast_body_t.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64508 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Now endless range can be created by either a literal `(1..)` or explicit
range creation `Range.new(1, nil)`. [Bug #14845]
This change is intended for "early failure"; for example,
`(1..var).to_a` causes out of memory if `var` is inadvertently nil.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63646 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
When an empty rule or a mid-rule action is reduced,
`YYLLOC_DEFAULT` is called with the third parameter to be zero.
If we use `RUBY_SET_YYLLOC_OF_NONE` to set their locations,
sometimes the end position of NODE indicates a blank.
For example, `a.b ;` generates `NODE_CALL (line: 1, location: (1,0)-(1,4))*`,
whose end position indicates a blank.
This is because of the following reasons:
* `NODE_CALL` is created when `primary_value call_op operation2 opt_paren_args` is
reduced to `method_call`.
* `opt_paren_args` is `none`.
* `yylex` is called and `lex.pbeg` moves before `none` is reduced, so
the beginning position of `none` does not match with the end position of `operation2`.
To fix locations, use `YYRHSLOC(Rhs, 0)` in `YYLLOC_DEFAULT`
(0 "refers to the symbol just before the reduction").
By this change, the bottom of the location stack would be referenced,
so initialize the bottom with `RUBY_SET_YYLLOC_OF_NONE` in `%initial-action`.
Ref: https://www.gnu.org/software/bison/manual/html_node/Location-Default-Action.html#Location-Default-Action
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63623 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (new_bodystmt): Fix locations of NODE_RESCUE
to end with nd_else or nd_resq. Before this commit,
locations of NODE_RESCUE included locations of nd_ensr
of NODE_ENSURE which is a parent node of NODE_RESCUE.
e.g. The location of the end of NODE_RESCUE is fixed:
```
def a
:b
rescue
:c
ensure
:d
end
```
* Before
```
NODE_RESCUE (line: 2, location: (2,2)-(6,4))
```
* After
```
NODE_RESCUE (line: 3, location: (2,2)-(5,0))
```
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63621 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Another part of the plan to reduce dependencies on malloc_usable_size
which costs us speed: https://bugs.ruby-lang.org/issues/10238
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63484 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
No automatic type promotion is expected for variadic arguments.
You have to do it by hand.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63474 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (cond0): do not warn literal boolean (true and false) in
condition expressions, as they are often used as infinite loops,
deactivated code block, etc.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63457 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (primary, new_args_tail, local_tbl): keep the order;
allocate an empty imemo first then xmalloc, to get rid of
potential memory leak when allocation imemo failed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63397 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y: Fix to start with the end of dots.
e.g. The locations of the NODE_NIL is fixed:
```
1..
```
* Before
```
NODE_NIL (line: 1, location: (1,0)-(1,3))
```
* After
```
NODE_NIL (line: 1, location: (1,3)-(1,3))
```
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63391 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* gc.c (rb_alloc_tmp_buffer_with_count): keep the order; allocate
an empty imemo first then xmalloc, to get rid of potential
memory leak when allocation imemo failed.
* parse.y (rb_parser_malloc, rb_parser_calloc, rb_parser_realloc):
ditto.
* process.c (rb_execarg_allocate_dup2_tmpbuf): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63385 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
imemo_alloc is used for three purposes: auto-free pointer (alternative
of alloca), alloc_tmp_buffer, and heap allocation for bison.
To make it clear, this change introduces three functions:
rb_imemo_alloc_auto_free_pointer,
rb_imemo_alloc_auto_free_maybe_mark_buffer, and
rb_imemo_alloc_parser_heap.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63371 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_imemo_alloc_new returns rb_imemo_alloc_t*, but took VALUEs, which is
inconsistent. To make the intention clear, it now takes only a pointer
to the buffer.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63369 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Typical usages:
```
p ary[1..] # drop the first element; identical to ary[1..-1]
(1..).each {|n|...} # iterate forever from 1; identical to 1.step{...}
```
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63192 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (parser_dedent_string): stated that Ripper.dedent_string
is for internal use only.
[ci skip]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63127 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (no_digits): return tINTEGER instead of unexpected
end-of-input, to get rid of extra error messages.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63126 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y: [DOC] fix return type in call-seq of Ripper.dedent_string,
clarify the method's behavior.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63121 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (bodystmt): expand opt_else to show the error message at
the right place.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62902 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (here_document): a continuing line is not the
terminator. [ruby-core:86283] [Bug #14621]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62873 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (tokadd_string): stop at continued line in dedented here
documents, to dedent for each lines before removing escaped
newlines. [ruby-core:86236] [Bug #14621]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62872 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (yycompile): in some cases (warning, error, dtrace,...),
ruby_sourcefile is expected to be NUL-terminated, so ensure it.
* template/prelude.c.tmpl (prelude_name): NUL-terminate to get rid
of copying static data.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62841 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (k_rescue, k_ensure): ignore indentations of `do`, it
is not at the beginning of line usually.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62838 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (f_kwrest): add the variable name as an argument, as
well as an internal variable.
* parse.y (new_args_tail): now keyword rest argument variable is
always placed between keyword arguments and block argument, so
so just reorder required and optional keyword arguments. no
longer kwrest duplicates.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62832 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y: use tSP same as ripper instead of tSPACE.
[ruby-core:86080] [Bug #14597]
* ext/ripper/eventids2.c: tSP is defined in ripper.c now.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62727 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (heredoc_dedent): fix interpolated string literal dedent,
remove indentations from only nodes with the newline flag.
[ruby-core:85983] [Bug #14584]
* parse.y (here_document): set the newline flag on literal string
nodes starting at the beginning of line.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62724 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (tSPACE): define a separate token for escaped space, to
fix `redefining user token number of ' '` error at word list
separator on bison 2.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62675 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y: named escaped whitespaces to show unexpected character.
bare whitespaces should not appear outside of word_list.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62663 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (assign_in_cond): refine a warning message for
assignment of a literal in conditinal expression.
[ruby-core:85872] [Bug #14562]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62620 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* parse.y (parser_yylex): as well as `tLBRACE_ARG` (expr block),
`tLBRACE` (primary block) also does not accept a label. only
hash brace accepts a label.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62000 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Currently, parser.y includes core parser and Ripper parser obscurity.
In addition, *some* Ripper code uses the result of the core parser,
which make it difficult to separate the two parsers.
I want to simplify this, not by separating the two parsers, but by
making *all* Ripper actions follows the core parser actions.
In other words, all the core parser actions run always even in Ripper,
and after that, Ripper-specific actions run.
For tha sake, in principle, I want to put `/*% ripper: ... %*/` in the
end of actions.
Anyway, it is too dirty to put it within expressions, IMO.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61990 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Nobuyoshi Nakada
Yusuke Endoh
Kazuhiro NISHIYAMA
Josh Cheek
Martin Dürst
Jeremy Evans
Hiroshi SHIBATA
Seiei Miyagi
ktsj
nobu
kazu
mame
yui-knk
normal
shyouhei
stomar