fix memory leak in vm_method
This introduces a unified reference_count to clarify who is referencing a method.
This also allows us to treat the refinement method as the def owner since it counts itself as a reference
Co-authored-by: Peter Zhu <peter@peterzhu.ca>
Previously, TestStack#test_machine_stack_size failed pretty consistently
on ARM64 macOS, with Rust code and part of the interpreter used for
per-instruction fallback (rb_vm_invokeblock() and friends) touching the
stack guard page and crashing with SEGV. I've also seen the same test
fail on x64 Linux, though with a different symptom.
From Ruby 3.0, refined method invocations are slow because
resolved methods are not cached by inline cache because of
conservertive strategy. However, `using` clears all caches
so that it seems safe to cache resolved method entries.
This patch caches resolved method entries in inline cache
and clear all of inline method caches when `using` is called.
fix [Bug #18572]
```ruby
# without refinements
class C
def foo = :C
end
N = 1_000_000
obj = C.new
require 'benchmark'
Benchmark.bm{|x|
x.report{N.times{
obj.foo; obj.foo; obj.foo; obj.foo; obj.foo;
obj.foo; obj.foo; obj.foo; obj.foo; obj.foo;
obj.foo; obj.foo; obj.foo; obj.foo; obj.foo;
obj.foo; obj.foo; obj.foo; obj.foo; obj.foo;
}}
}
_END__
user system total real
master 0.362859 0.002544 0.365403 ( 0.365424)
modified 0.357251 0.000000 0.357251 ( 0.357258)
```
```ruby
# with refinment but without using
class C
def foo = :C
end
module R
refine C do
def foo = :R
end
end
N = 1_000_000
obj = C.new
require 'benchmark'
Benchmark.bm{|x|
x.report{N.times{
obj.foo; obj.foo; obj.foo; obj.foo; obj.foo;
obj.foo; obj.foo; obj.foo; obj.foo; obj.foo;
obj.foo; obj.foo; obj.foo; obj.foo; obj.foo;
obj.foo; obj.foo; obj.foo; obj.foo; obj.foo;
}}
}
__END__
user system total real
master 0.957182 0.000000 0.957182 ( 0.957212)
modified 0.359228 0.000000 0.359228 ( 0.359238)
```
```ruby
# with using
class C
def foo = :C
end
module R
refine C do
def foo = :R
end
end
N = 1_000_000
using R
obj = C.new
require 'benchmark'
Benchmark.bm{|x|
x.report{N.times{
obj.foo; obj.foo; obj.foo; obj.foo; obj.foo;
obj.foo; obj.foo; obj.foo; obj.foo; obj.foo;
obj.foo; obj.foo; obj.foo; obj.foo; obj.foo;
obj.foo; obj.foo; obj.foo; obj.foo; obj.foo;
}}
}
`struct rb_calling_info::cd` is introduced and `rb_calling_info::ci`
is replaced with it to manipulate the inline cache of iseq while
method invocation process. So that `ci` can be acessed with
`calling->cd->ci`. It adds one indirection but it can be justified
by the following points:
1) `vm_search_method_fastpath()` doesn't need `ci` and also
`vm_call_iseq_setup_normal()` doesn't need `ci`. It means
reducing `cd->ci` access in `vm_sendish()` can make it faster.
2) most of method types need to access `ci` once in theory
so that 1 additional indirection doesn't matter.
Remove rb_control_frame_t::__bp__ and optimize bmethod calls
This commit removes the __bp__ field from rb_control_frame_t. It was
introduced to help MJIT, but since MJIT was replaced by RJIT, we can use
vm_base_ptr() to compute it from the SP of the previous control frame
instead. Removing the field avoids needing to set it up when pushing new
frames.
Simply removing __bp__ would cause crashes since RJIT and YJIT used a
slightly different stack layout for bmethod calls than the interpreter.
At the moment of the call, the two layouts looked as follows:
┌────────────┐ ┌────────────┐
│ frame_base │ │ frame_base │
├────────────┤ ├────────────┤
│ ... │ │ ... │
├────────────┤ ├────────────┤
│ args │ │ args │
├────────────┤ └────────────┘<─prev_frame_sp
│ receiver │
prev_frame_sp─>└────────────┘
RJIT & YJIT interpreter
Essentially, vm_base_ptr() needs to compute the address to frame_base
given prev_frame_sp in the diagrams. The presence of the receiver
created an off-by-one situation.
Make the interpreter use the layout the JITs use for iseq-to-iseq
bmethod calls. Doing so removes unnecessary argument shifting and
vm_exec_core() re-entry from the interpreter, yielding a speed
improvement visible through `benchmark/vm_defined_method.yml`:
patched: 7578743.1 i/s
master: 4796596.3 i/s - 1.58x slower
C-to-iseq bmethod calls now store one more VALUE than before, but that
should have negligible impact on overall performance.
Note that re-entering vm_exec_core() used to be necessary for firing
TracePoint events, but that's no longer the case since
9121e57a5f.
Closesruby/ruby#6428
This reverts commit 10621f7cb9.
This was reverted because the gc integrity build started failing. We
have figured out a fix so I'm reopening the PR.
Original commit message:
Fix cvar caching when class is cloned
The class variable cache that was added in
ruby#4544 changed the behavior of class
variables on cloned classes. As reported when a class is cloned AND a
class variable was set, and the class variable was read from the
original class, reading a class variable from the cloned class would
return the value from the original class.
This was happening because the IC (inline cache) is stored on the ISEQ
which is shared between the original and cloned class, therefore they
share the cache too.
To fix this we are now storing the `cref` in the cache so that we can
check if it's equal to the current `cref`. If it's different we don't
want to read from the cache. If it's the same we do. Cloned classes
don't share the same cref with their original class.
This will need to be backported to 3.1 in addition to 3.2 since the bug
exists in both versions.
We also added a marking function which was missing.
Fixes [Bug #19379]
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
The class variable cache that was added in
https://github.com/ruby/ruby/pull/4544 changed the behavior of class
variables on cloned classes. As reported when a class is cloned AND a
class variable was set, and the class variable was read from the
original class, reading a class variable from the cloned class would
return the value from the original class.
This was happening because the IC (inline cache) is stored on the ISEQ
which is shared between the original and cloned class, therefore they
share the cache too.
To fix this we are now storing the `cref` in the cache so that we can
check if it's equal to the current `cref`. If it's different we don't
want to read from the cache. If it's the same we do. Cloned classes
don't share the same cref with their original class.
This will need to be backported to 3.1 in addition to 3.2 since the bug
exists in both versions.
We also added a marking function which was missing.
Fixes [Bug #19379]
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Prior to this commit, a segmentation fault occurred in `vm_defined`'s
`zsuper` implementation after NULL is returned as `BasicObject`'s superclass.
This fix returns false from `vm_defined` if the superclass is NULL.
For example, the following code resulted in a segfault.
```ruby
class BasicObject
def seg_fault
defined?(super)
end
end
seg_fault
```
CALLER_ARG_SPLAT is not necessary for method_missing. We just need
to unshift the method name into the arguments.
This optimizes all method_missing calls:
* mm(recv) ~9%
* mm(recv, *args) ~215% for args.length == 200
* mm(recv, *args, **kw) ~55% for args.length == 200
* mm(recv, **kw) ~22%
* mm(recv, kw: 1) ~100%
Note that empty argument splats do get slower with this approach,
by about 30-40%. Other than non-empty argument splats, other
argument splats are faster, with the speedup depending on the
number of arguments.
Similar to the bmethod/send optimization, this avoids using
CALLER_ARG_SPLAT if not necessary. As long as the receiver argument
can be shifted off, other arguments are passed through as-is.
This optimizes the following types of calls:
* symproc.(recv) ~5%
* symproc.(recv, *args) ~65% for args.length == 200
* symproc.(recv, *args, **kw) ~45% for args.length == 200
* symproc.(recv, **kw) ~30%
* symproc.(recv, kw: 1) ~100%
Note that empty argument splats do get slower with this approach,
by about 2-3%. This is probably because iseq argument setup is
slower for empty argument splats than CALLER_SETUP_ARG is. Other
than non-empty argument splats, other argument splats are faster,
with the speedup depending on the number of arguments.
The following types of calls are not optimized:
* symproc.(*args)
* symproc.(*args, **kw)
This is because the you cannot shift the receiver argument off
without first splatting the arg.
Similar to the bmethod optimization, this avoids using
CALLER_ARG_SPLAT if not necessary. As long as the method argument
can be shifted off, other arguments are passed through as-is.
This optimizes the following types of calls:
* send(meth, arg) ~5%
* send(meth, *args) ~75% for args.length == 200
* send(meth, *args, **kw) ~50% for args.length == 200
* send(meth, **kw) ~25%
* send(meth, kw: 1) ~115%
Note that empty argument splats do get slower with this approach,
by about 20%. This is probably because iseq argument setup is
slower for empty argument splats than CALLER_SETUP_ARG is. Other
than non-empty argument splats, other argument splats are faster,
with the speedup depending on the number of arguments.
The following types of calls are not optimized:
* send(*args)
* send(*args, **kw)
This is because the you cannot shift the method argument off
without first splatting the arg.
This optimizes the following calls:
* ~10-15% for f(*a) when a does not end with a flagged keywords hash
* ~10-15% for f(*a) when a ends with an empty flagged keywords hash
* ~35-40% for f(*a, **kw) if kw is empty
This still copies the array contents to the VM stack, but avoids some
overhead. It would be faster to use the array pointer directly,
but that could cause problems if the array was modified during
the call to the function. You could do that optimization for frozen
arrays, but as splatting frozen arrays is uncommon, and the speedup
is minimal (<5%), it doesn't seem worth it.
The vm_send_cfunc benchmark has been updated to test additional cfunc
call types, and the numbers above were taken from the benchmark results.
Currently, bmethod arguments are copied from the VM stack to the
C stack in vm_call_bmethod, then copied from the C stack to the VM
stack later in invoke_iseq_block_from_c. This is inefficient.
This adds vm_call_iseq_bmethod and vm_call_noniseq_bmethod.
vm_call_iseq_bmethod is an optimized method that skips stack
copies (though there is one copy to remove the receiver from
the stack), and avoids calling vm_call_bmethod_body,
rb_vm_invoke_bmethod, invoke_block_from_c_proc,
invoke_iseq_block_from_c, and vm_yield_setup_args.
Th vm_call_iseq_bmethod argument handling is similar to the
way normal iseq methods are called, and allows for similar
performance optimizations when using splats or keywords.
However, even in the no argument case it's still significantly
faster.
A benchmark is added for bmethod calling. In my environment,
it improves bmethod calling performance by 38-59% for simple
bmethod calls, and up to 180% for bmethod calls passing
literal keywords on both sides.
```
./miniruby-iseq-bmethod: 18159792.6 i/s
./miniruby-m: 13174419.1 i/s - 1.38x slower
bmethod_simple_1
./miniruby-iseq-bmethod: 15890745.4 i/s
./miniruby-m: 10008972.7 i/s - 1.59x slower
bmethod_simple_0_splat
./miniruby-iseq-bmethod: 13142804.3 i/s
./miniruby-m: 11168595.2 i/s - 1.18x slower
bmethod_simple_1_splat
./miniruby-iseq-bmethod: 12375791.0 i/s
./miniruby-m: 8491140.1 i/s - 1.46x slower
bmethod_no_splat
./miniruby-iseq-bmethod: 10151258.8 i/s
./miniruby-m: 8716664.1 i/s - 1.16x slower
bmethod_0_splat
./miniruby-iseq-bmethod: 8138802.5 i/s
./miniruby-m: 7515600.2 i/s - 1.08x slower
bmethod_1_splat
./miniruby-iseq-bmethod: 8028372.7 i/s
./miniruby-m: 5947658.6 i/s - 1.35x slower
bmethod_10_splat
./miniruby-iseq-bmethod: 6953514.1 i/s
./miniruby-m: 4840132.9 i/s - 1.44x slower
bmethod_100_splat
./miniruby-iseq-bmethod: 5287288.4 i/s
./miniruby-m: 2243218.4 i/s - 2.36x slower
bmethod_kw
./miniruby-iseq-bmethod: 8931358.2 i/s
./miniruby-m: 3185818.6 i/s - 2.80x slower
bmethod_no_kw
./miniruby-iseq-bmethod: 12281287.4 i/s
./miniruby-m: 10041727.9 i/s - 1.22x slower
bmethod_kw_splat
./miniruby-iseq-bmethod: 5618956.8 i/s
./miniruby-m: 3657549.5 i/s - 1.54x slower
```
Originally, when 2e7bceb34e fixed cfuncs to no
longer use the VM stack for large array splats, it was thought to have fully
fixed Bug #4040, since the issue was fixed for methods defined in Ruby (iseqs)
back in Ruby 2.2.
After additional research, I determined that same issue affects almost all
types of method calls, not just iseq and cfunc calls. There were two main
types of remaining issues, important cases (where large array splat should
work) and pedantic cases (where large array splat raised SystemStackError
instead of ArgumentError).
Important cases:
```ruby
define_method(:a){|*a|}
a(*1380888.times)
def b(*a); end
send(:b, *1380888.times)
:b.to_proc.call(self, *1380888.times)
def d; yield(*1380888.times) end
d(&method(:b))
def self.method_missing(*a); end
not_a_method(*1380888.times)
```
Pedantic cases:
```ruby
def a; end
a(*1380888.times)
def b(_); end
b(*1380888.times)
def c(_=nil); end
c(*1380888.times)
c = Class.new do
attr_accessor :a
alias b a=
end.new
c.a(*1380888.times)
c.b(*1380888.times)
c = Struct.new(:a) do
alias b a=
end.new
c.a(*1380888.times)
c.b(*1380888.times)
```
This patch fixes all usage of CALLER_SETUP_ARG with splatting a large
number of arguments, and required similar fixes to use a temporary
hidden array in three other cases where the VM would use the VM stack
for handling a large number of arguments. However, it is possible
there may be additional cases where splatting a large number
of arguments still causes a SystemStackError.
This has a measurable performance impact, as it requires additional
checks for a large number of arguments in many additional cases.
This change is fairly invasive, as there were many different VM
functions that needed to be modified to support this. To avoid
too much API change, I modified struct rb_calling_info to add a
heap_argv member for storing the array, so I would not have to
thread it through many functions. This struct is always stack
allocated, which helps ensure sure GC doesn't collect it early.
Because of how invasive the changes are, and how rarely large
arrays are actually splatted in Ruby code, the existing test/spec
suites are not great at testing for correct behavior. To try to
find and fix all issues, I tested this in CI with
VM_ARGC_STACK_MAX to -1, ensuring that a temporary array is used
for all array splat method calls. This was very helpful in
finding breaking cases, especially ones involving flagged keyword
hashes.
Fixes [Bug #4040]
Co-authored-by: Jimmy Miller <jimmy.miller@shopify.com>
This commit introduces a new instruction `opt_newarray_send` which is
used when there is an array literal followed by either the `hash`,
`min`, or `max` method.
```
[a, b, c].hash
```
Will emit an `opt_newarray_send` instruction. This instruction falls
back to a method call if the "interested" method has been monkey
patched.
Here are some examples of the instructions generated:
```
$ ./miniruby --dump=insns -e '[@a, @b].max'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,12)> (catch: FALSE)
0000 getinstancevariable :@a, <is:0> ( 1)[Li]
0003 getinstancevariable :@b, <is:1>
0006 opt_newarray_send 2, :max
0009 leave
$ ./miniruby --dump=insns -e '[@a, @b].min'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,12)> (catch: FALSE)
0000 getinstancevariable :@a, <is:0> ( 1)[Li]
0003 getinstancevariable :@b, <is:1>
0006 opt_newarray_send 2, :min
0009 leave
$ ./miniruby --dump=insns -e '[@a, @b].hash'
== disasm: #<ISeq:<main>@-e:1 (1,0)-(1,13)> (catch: FALSE)
0000 getinstancevariable :@a, <is:0> ( 1)[Li]
0003 getinstancevariable :@b, <is:1>
0006 opt_newarray_send 2, :hash
0009 leave
```
[Feature #18897] [ruby-core:109147]
Co-authored-by: John Hawthorn <jhawthorn@github.com>
If the iseq only contains `opt_invokebuiltin_delegate_leave` insn and
the builtin-function (bf) is inline-able, the caller doesn't need to
build a method frame.
`vm_call_single_noarg_inline_builtin` is fast path for such cases.
st tables will maintain insertion order so we can marshal dump / load
objects with instance variables in the same order they were set on that
particular instance
[ruby-core:112926] [Bug #19535]
Co-Authored-By: Jemma Issroff <jemmaissroff@gmail.com>
This is a variation of the `defined` instruction, for use when we
are checking for an instance variable. Splitting this out as a
separate instruction lets us skip some checks, and it also allows
us to use an instance variable cache, letting shape analysis
speed up the operation further.
The following script can sometimes trigger a crash:
```ruby
GC.stress = true
class Array
def foo(bool)
if bool
@a = 1
@b = 2
@c = 1
else
@c = 1
end
end
end
obj = []
obj.foo(true)
obj2 = []
obj2.foo(false)
obj3 = []
obj3.foo(true)
```
This is because vm_setivar_default calls rb_ensure_generic_iv_list_size
to resize the iv list. However, the call to gen_ivtbl_resize reallocs
the iv list, and then inserts into the generic iv table. If the
st_insert triggers a GC then the old iv list will be read during
marking, causing a use-after-free bug.
Co-Authored-By: Jemma Issroff <jemmaissroff@gmail.com>
Adam Hess
Alan Wu
Maxime Chevalier-Boisvert
Takashi Kokubun
Koichi Sasada
ywenc
Peter Zhu
Nobuyoshi Nakada
eileencodes
Aaron Patterson
Samuel Williams
Gary Tou
Jeremy Evans
Ole Friis Østergaard