* vm_core.h (rb_thread_t): move several fields which are copied at cont.c
to rb_execution_context_t.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59177 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_thread_t::tag_state): move to "rb_vm_tag::state".
Lifetime of "state" should be same as current tag.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59159 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_thread_t): rename rb_thread_t::state to tag_state
to make it clear.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59158 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_stack_consistency_error): extracted from
insns.def for further info in the future.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59149 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (OPT_CALL_CFUNC_WITHOUT_FRAME): removed because nobody use it.
This optimization tries to call C-methods without pushing VM frames,
however no big improvements compare with this complexity.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59076 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* compile.c (iseq_compile_each0): save target child_iseq in the catch-table
for break. This iseq is not for continuation, but for search key at
vm_throw_start().
* vm_insnhelper.c (vm_throw_start): check saved iseq first.
* iseq.h: add comment for it.
* test/ruby/test_iterator.rb (test_ljump): add a test for the issue:
def call b; b.call; end
call(Proc.new{break}){} #=> (1) should raise LocalJumpError
call(Proc.new{break}) #=> (2) shoudd raies LocalJumpError, too.
but (1) doesn't raise LocalJumpError.
This issue is reported by Matz.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59043 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_args.c (enum arg_setup_type): remove arg_setup_lambda because it is
same as arg_setup_method.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59014 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
VM_FRAME_FLAG_LAMBDA. So that lambda block frame is
VM_FRAME_MAGIC_BLOCK | VM_FRAME_FLAG_LAMBDA.
* vm_core.h: remvoe VM_FRAME_MAGIC_PROC because nobody uses it.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@59006 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
To convert the object implicitly, it has had two parts in convert_type() which are
1. lookink up the method's id
2. calling the method
Seems that strncmp() and strcmp() in convert_type() are slightly heavy to look up
the method's id for type conversion.
This patch will add and use internal APIs (rb_convert_type_with_id, rb_check_convert_type_with_id)
to call the method without looking up the method's id when convert the object.
Array#flatten -> 19 % up
Array#+ -> 3 % up
[ruby-dev:50024] [Bug #13341] [Fix GH-1537]
### Before
Array#flatten 104.119k (± 1.1%) i/s - 525.690k in 5.049517s
Array#+ 1.993M (± 1.8%) i/s - 10.010M in 5.024258s
### After
Array#flatten 124.005k (± 1.0%) i/s - 624.240k in 5.034477s
Array#+ 2.058M (± 4.8%) i/s - 10.302M in 5.019328s
### Test Code
require 'benchmark/ips'
class Foo
def to_ary
[1,2,3]
end
end
Benchmark.ips do |x|
ary = []
100.times { |i| ary << i }
array = [ary]
x.report "Array#flatten" do |i|
i.times { array.flatten }
end
x.report "Array#+" do |i|
obj = Foo.new
i.times { array + obj }
end
end
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58978 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* debug_counter.h: add the following counters:
* lvar_get: counter for lvar get.
* lvar_get_dynamic: counter for lvar get from upper frames.
* lvar_set: coutner for lvar set.
* lvar_set_dynamic: coutner for lvar set from upper frames.
* lvar_set_slowpath: counter for lavr set using slowpath.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58977 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (comparable_by_identity): extract the condition
where comparable by identity. currently both are same types,
Fixnum, Flonum, or Symbol.
* vm_insnhelper.c (opt_eql_func): support Symbol too.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58896 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (rb_eql_opt): should call #eql? on Float and
String, not #==.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58882 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This improvement is similar with https://github.com/ruby/ruby/pull/1552
internal.h: add declaration of rb_eql_opt() API.
vm_insnhelper.c (rb_eql_opt): add rb_eql_opt() API which provides optimized
path for #eql? method such as rb_equal_opt().
object.c (rb_eql): optimize using rb_eql_opt() such as rb_equal().
Array#eql? and some methods have used rb_eql() and Array#eql? will be faster
around 20%.
[ruby-core:80761] [Bug #13447] [Fix GH-#1589]
### Before
user system total real
1.570000 0.000000 1.570000 ( 1.569754)
### After
user system total real
1.300000 0.000000 1.300000 ( 1.303624)
### Test code
require 'benchmark'
Benchmark.bmbm do |x|
ary1 = Array.new(1000) { rand(1000) }
ary2 = Array.new(1000) { rand(1000) }
x.report do
5000000.times do
ary1.eql?(ary2)
end
end
end
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58881 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The goal is to reduce rb_context_t and rb_fiber_t size
by removing the need to store the entire rb_thread_t in
there.
[ruby-core:81045] Work-in-progress: soon, we will move more fields here.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58614 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_once_dispatch): no guarantee that tail call
is always optimized away.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58405 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Those opt_something instructions are worth refactoring. They tend to
have similar ways of executions. By extracting the common part,
generated vm_exec_core function shrinks from 26,816 bytes to 26,256
bytes (according to nm(1)).
This changeset introduces negligible performance impact. 3 repeated
runs of optcarrot benchmark on my machine resulted in:
before this: 28.813363684823557, 27.523907198440366, 27.292766121965400
after this: 28.174038497265080, 28.999513875020405, 29.621399800428065
in fps (greater==faster).
----
* vm_insnhelper.c (vm_opt_binop_dispatch): new function.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58402 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Contemporary C compilers are good at function inlining. They fold
multiple functions into one. However they are not yet smart enough to
unfold a function into several ones. So generally speaking, it is
wiser for a C programmer to manually split C functions whenever
possible. That should make rooms for compilers to optimize at will.
Before this changeset insns.def was converted into single HUGE
function called vm_exec_core(). By moving each instruction's core
into individual functions, generated C source code is reduced from
3,428 lines to 2,847 lines. Looking at the generated assembly
however, it seems my compiler (gcc 6.2) is extraordinary smart so that
it inlines almost all functions I introduced in this changeset back
into that vm_exec_core. On my machine compiled machine binary of the
function does not shrink very much in size (28,432 bytes to 26,816
bytes, according to nm(1)).
I believe this change is zero-cost. Several benchmarks I exercised
showed no significant difference beyond error mergin. For instance
3 repeated runs of optcarrot benchmark on my machine resulted in:
before this: 28.330329285707490, 27.513378371065920, 29.40420215754537
after this: 27.107195867280414, 25.549324021385907, 30.31581919050884
in fps (greater==faster).
----
* internal.h (rb_obj_not_equal): used from vm_insnhelper.c
* insns.def: move vast majority of lines into vm_insnhelper.c
* vm_insnhelper.c: moved here.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58390 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (rb_threadptr_stack_overflow): move from
thread.c and integrate with vm_stackoverflow.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58379 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_yield_lambda): new function which yields an array
to a proc and splat to a lambda. mainly for Enumerable only.
* vm_args.c (setup_parameters_complex): remove special lambda
splatting for [Bug #9605]. [ruby-core:77065] [Bug #12705]
* vm_insnhelper.c (vm_callee_setup_block_arg): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58019 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm.c (invoke_iseq_block_from_c): guard arguments on stack, not
to be clobbered during splatting.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58012 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (opt_eq_func): method to dispatch is resolved by
only the receiver's class, not including the argument class.
even if basic operation is redefined, other class conditions
never meet. optimize Float and non-Float case, delegate to
rb_float_equal directly.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57785 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* How to enable this feature?
* define USE_DEBUG_COUNTER as 1.
* you can disable to output the result with
RUBY_DEBUG_COUNTER_DISABLE environment variable
even if USE_DEBUG_COUNTER == 1.
* How to add new counter?
* add COUNTER(<name>) line on debug_counter.h.
* include "debug_counter.h"
* insert RB_DEBUG_COUNTER_INC(<name>) line on your favorite place.
* counter output example:
[RUBY_DEBUG_COUNTER] mc_inline_hit 999
[RUBY_DEBUG_COUNTER] mc_inline_miss 3
[RUBY_DEBUG_COUNTER] mc_global_hit 23
[RUBY_DEBUG_COUNTER] mc_global_miss 273
[RUBY_DEBUG_COUNTER] mc_global_state_miss 3
[RUBY_DEBUG_COUNTER] mc_class_serial_miss 0
[RUBY_DEBUG_COUNTER] mc_cme_complement 0
[RUBY_DEBUG_COUNTER] mc_cme_complement_hit 0
[RUBY_DEBUG_COUNTER] mc_search_super 1384
[RUBY_DEBUG_COUNTER] ivar_get_hit 0
[RUBY_DEBUG_COUNTER] ivar_get_miss 0
[RUBY_DEBUG_COUNTER] ivar_set_hit 0
[RUBY_DEBUG_COUNTER] ivar_set_miss 0
[RUBY_DEBUG_COUNTER] ivar_get 431
[RUBY_DEBUG_COUNTER] ivar_set 465
* mc_... is related to method caching.
* ivar_... is related to instance variable accesses.
* compare with dtrace/system tap features, there are completely
no performacne penalties when it is disabled.
* This feature is supported only on __GNUC__ compilers.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57676 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_call_zsuper): method defined in module in
refinement is not callable as-is. dispatch again.
[ruby-core:79588] [Bug #13227]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57655 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (setup_exception): make unfrozen copy of special
exception before setting up a cause.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57415 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_call_iseq_setup_tailcall): check interrupts
after set up the new frame, not the passed block to be clobbered
by invoked finalizers and so on. [ruby-core:78981] [Bug #13107]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@57293 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (callable_class_p): update assertion as callable
class may be T_MODULE or I_ICLASS which refines a module since
r56213. [Feature #12534]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@56381 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (CHECK): remove extra semicolon and fold too
long line.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55806 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and VM_FRAME_CFRAME_P().
Most of case, RUBY_VM_NORMAL_ISEQ_P() is no
longer needed.
* vm_core.h: introduce rb_obj_is_iseq().
* cont.c, vm.c: VM_FRAME_MAGIC_DUMMY with
VM_FRAME_FLAG_CFRAME.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55804 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* *.c: rename rb_funcall2 to rb_funcallv, except for extensions
which are/will be/may be gems. [Fix GH-1406]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55773 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
are imemo objects (imemo_env).
* NEWS: describe this change. I believe nobody touch these objects
because there are no method defined.
* vm_core.h: remove the following definitions.
* rb_cEnv decl.
* GetEnvPtr() because Env is no longer T_DATA object.
* vm_core.h (rb_env_t): fix layout for imemo values.
* vm_core.h (vm_assert_env): added.
* vm_core.h (vm_env_new): added.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55768 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
[Bug #12628]
This patch introduce many changes.
* Introduce concept of "Block Handler (BH)" to represent
passed blocks.
* move rb_control_frame_t::flag to ep[0] (as a special local
variable). This flags represents not only frame type, but also
env flags such as escaped.
* rename `rb_block_t` to `struct rb_block`.
* Make Proc, Binding and RubyVM::Env objects wb-protected.
Check [Bug #12628] for more details.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55766 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
instead of setting rb_thread_t::cfp directly.
* vm_insnhelper.c (vm_pop_frame): return the result of
finish frame or not.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55755 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_throw_start): check if the iseq is symbol
proc, class definition should not be a symbol proc.
[ruby-core:75856] [Bug #12462]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55297 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* [Feature #12005] Unify Fixnum and Bignum into Integer
* include/ruby/ruby.h (rb_class_of): Return rb_cInteger for fixnums.
* insns.def (INTEGER_REDEFINED_OP_FLAG): Unified from
FIXNUM_REDEFINED_OP_FLAG and BIGNUM_REDEFINED_OP_FLAG.
* vm_core.h: Ditto.
* vm_insnhelper.c (opt_eq_func): Use INTEGER_REDEFINED_OP_FLAG instead
of FIXNUM_REDEFINED_OP_FLAG.
* vm.c (vm_redefinition_check_flag): Use rb_cInteger instead of
rb_cFixnum and rb_cBignum.
(C): Use Integer instead of Fixnum and Bignum.
* numeric.c (fix_succ): Removed.
(Init_Numeric): Define Fixnum as Integer.
* bignum.c (bignew): Use rb_cInteger instead of Rb_cBignum.
(rb_int_coerce): replaced from rb_big_coerce and return fixnums
as-is.
(Init_Bignum): Define Bignum as Integer.
Don't define ===.
* error.c (builtin_class_name): Return "Integer" for fixnums.
* sprintf.c (ruby__sfvextra): Use rb_cInteger instead of rb_cFixnum.
* ext/-test-/testutil: New directory to test.
Currently it provides utilities for fixnum and bignum.
* ext/json/generator/generator.c: Define mInteger_to_json.
* lib/mathn.rb (Fixnum#/): Redefinition removed.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55024 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_get_ev_const): warn deprecated constant even
in the class context. [ruby-core:75505] [Bug #12382]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@55005 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and define CONSTFUNC and PUREFUNC if available.
Note that I don't add those options as default because
it still shows many false-positive (it seems not to consider
longjmp).
* vm_eval.c (stack_check): get rb_thread_t* as an argument
to avoid duplicate call of GET_THREAD().
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54952 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This reverts commit r54747.
!__clang__ is also essential.
Anyway clang inlines vm_getivar into both vm_call_ivar and
vm_getinstancevariable, which r54728 originally intended to.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54751 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (INLINE): works with __NO_INLINE__ only,
__clang__ is not the point.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54747 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
define as `static inline` when it is not optimized to keep
the symbol generated.
* vm_insnhelper.c (vm_getivar): use `INLINE` to force inline
so that a compiler inlines it into vm_getinstancevariable
and optimizes out is_attr and related branches.
* vm_insnhelper.c (vm_getivar): use `inline` to recommend inline.
Without this vm1_ivar_set is degraded.
benchmark results:
minimum results in each 5 measurements.
Execution time (sec)
name ruby 2.4.0dev (2016-04-23 trunk 54727) [x86_64-linux] ruby 2.4.0dev (2016-04-23 trunk 54733) [x86_64-linux] built-ruby
loop_whileloop 0.641 0.642 0.646
vm1_ivar* 1.002 0.999 0.831
vm1_ivar_set* 0.369 1.106 0.362
Speedup ratio: compare with the result of `ruby 2.4.0dev (2016-04-23
trunk 54727) [x86_64-linux]' (greater is better)
name ruby 2.4.0dev (2016-04-23 trunk 54733) [x86_64-linux]
built-ruby
loop_whileloop
0.998 0.991
vm1_ivar*
1.003 1.205
vm1_ivar_set*
0.334 1.018
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54738 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_getivar): add missing static to inline,
otherwise external symbol is referred and link fails when
optimization is disabled.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54729 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
vm_getivar is called by vm_call_ivar and vm_getinstancevariable.
At least with GCC 4.8 and 5.3 on Linux, they are inlining it into
vm_call_ivar but not vm_getinstancevariable.
By `inline`, they correctly inline it and gains performance.
Speedup ratio: compare with the result of `ruby 2.4.0dev (2016-04-23
trunk 54727) [x86_64-linux]' (greater is better)
name built-ruby
loop_whileloop 1.001
vm1_ivar* 1.189
vm1_ivar_set* 1.024
Note tha `inline`'s meaning is different between old GCC
and C99. Old GCC's inline means C99's extern inline.
https://gcc.gnu.org/onlinedocs/gcc/Inline.html
Since Ruby specify -std=iso9899:1999, it works like C99.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@54728 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Take advantage of "%+" modifier in the format string instead of
explicitly calling rb_inspect to reduce object size.
On x86 32-bit:
text data bss dec hex filename
before: 2949572 12448 30680 2992700 2daa3c miniruby
after: 2949464 12448 30680 2992592 2da9d0 miniruby
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53644 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (make_no_method_exception): make format string
fstring.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53525 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
functions) to the latter location.
This moving recovers performance a little.
[Bug #11829]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53236 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
with keyword arguments for VM_METHOD_TYPE_ATTRSET type methods.
Normally, we can not use keyword arguments for this kind of methods,
(obj.foo = 1), but we can set alias names for them.
[Bug #11657]
* test/ruby/test_keyword.rb: add a test for this fix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53164 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_call_method_missing): remove spaces just
before a tab to adjust indent.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@53062 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and a pre-compilation/runtime loader sample.
[Feature #11788]
* iseq.c: add new methods:
* RubyVM::InstructionSequence#to_binary_format(extra_data = nil)
* RubyVM::InstructionSequence.from_binary_format(binary)
* RubyVM::InstructionSequence.from_binary_format_extra_data(binary)
* compile.c: implement body of this new feature.
* load.c (rb_load_internal0), iseq.c (rb_iseq_load_iseq):
call RubyVM::InstructionSequence.load_iseq(fname) with
loading script name if this method is defined.
We can return any ISeq object as a result value.
Otherwise loading will be continue as usual.
This interface is not matured and is not extensible.
So that we don't guarantee the future compatibility of this method.
Basically, you should'nt use this method.
* iseq.h: move ISEQ_MAJOR/MINOR_VERSION (and some definitions)
from iseq.c.
* encoding.c (rb_data_is_encoding), internal.h: added.
* vm_core.h: add several supports for lazy load.
* add USE_LAZY_LOAD macro to specify enable or disable of
this feature.
* add several fields to rb_iseq_t.
* introduce new macro rb_iseq_check().
* insns.def: some check for lazy loading feature.
* vm_insnhelper.c: ditto.
* proc.c: ditto.
* vm.c: ditto.
* test/lib/iseq_loader_checker.rb: enabled iff suitable
environment variables are provided.
* test/runner.rb: enable lib/iseq_loader_checker.rb.
* sample/iseq_loader.rb: add sample compiler and loader.
$ ruby sample/iseq_loader.rb [dir]
will compile all ruby scripts in [dir].
With default setting, this compile creates *.rb.yarb files
in same directory of target .rb scripts.
$ ruby -r sample/iseq_loader.rb [app]
will run with enable to load compiled binary data.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52949 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
CREFs should not be shared by methods between `using'.
[Bug #11247]
* vm_insnhelper.c (vm_cref_replace_with_duplicated_cref): ditto.
* vm.c (vm_cref_dup): should copy refinements correctly.
* eval.c: use rb_vm_cref_replace_with_duplicated_cref().
* eval_intern.h: add a decl. of
rb_vm_cref_replace_with_duplicated_cref().
* vm_eval.c (eval_string_with_cref): do not need to pass
scope's CREF because VM can find out CREF from stack frames.
* test/ruby/test_refinement.rb: add a test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52677 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* rb_method_definition_t::complemented_count to count shared method
entries because of complemented method entries and separate from
alias_count.
Shared `def' only by complemented method entries should not prevent
method re-definition warning.
* METHOD_ENTRY_COMPLEMENTED(me) to represent complemented method entry.
* METHOD_ENTRY_COMPLEMENTED_SET(me) to check it as complemented me.
* vm_insnhelper.c (aliased_callable_method_entry): should also
check me->def->complemented_count.
* vm_method.c (method_definition_addref_complement): add to count
complemented method entries number.
* vm_method.c (rb_method_definition_release): release `def' iff
alias_count == 0 and complemented_count == 0.
* test/ruby/test_module.rb: add a test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52636 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_call_method_missing): get rid of extra
garbage after argv.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52404 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
current cref only when cached CREF list includes singleton class.
Singleton classes have own namespaces, so that we need to check
cref as a key (#10943).
However, if current CREF list does not include singleton class,
no need to check CREF beacuse it should be same name space.
* vm_insnhelper.c (vm_get_const_key_cref): add a function returns
CREF only when it includes singleton class.
* vm_core.h: constify iseq_inline_cache_entry::ic_cref.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52371 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (VM_PROFILE_UP): use enum.
* vm_insnhelper.c (vm_profile_show_result): fix typo, "r->c" at
the last should be "c->c".
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52343 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
of arguments", distinguishing given and expected argument
numbers clearly. [Feature #9025]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52264 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
vm_call_iseq_setup_normal_0start() is simple, however it has
some loops/conditions depends on ISeq::param.size and
ISeq::local_size (in vm_push_frame(), inlined into this function).
There are many simple methods which has a few parameters and local
variables. So that this patch introduces several special functions
generated in vm_call_iseq_optimized.inc by
tool/mk_call_iseq_optimized.rb.
This script makes
vm_call_iseq_setup_normal_0start_Xparams_Ylocals()
where X is 0 to 3 and Y is 1 to 6 (as current setting).
In this case, X * Y = 24 functions are created.
These functions creates fast method dispatch by inlining
vm_push_frame() with immediate params/locals sizes.
On my laptop, we can have the following results.
vm2_method* 1.083 (8.3% faster)
vm2_poly_method* 0.961 (3.4% slower)
It shows 8.3% faster for inner loop method dispatch (hit inline
cache), but 3.4% slower when inline cache miss because we need
to find a suitable call handler.
* common.mk: add a rule for vm_call_iseq_optimized.inc.
* tool/mk_call_iseq_optimized.rb: added.
* vm.c: include vm_call_iseq_optimized.inc.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52254 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_yield_with_cfunc): cast to suppress a
warning by VC.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52144 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
functions.
* vm_insnhelper.c (vm_yield_callee_setup_arg): remove this function
beacuse it is only delegation function.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52104 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Pointed out by Yukihiro Matsumoto <matz@ruby-lang.org>.
* gc.c (newobj_of_...): `of' is unnecessary.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52102 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
because $SAFE = 3 and 4 is not available.
Now, $SAFE is not checked on method dispatch at all.
* vm_eval.c, vm_insnhelper.c, vm_method.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52058 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Change all goto statement across blocks to tail call functions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@52049 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_args.c (vm_caller_setup_arg_block): store new ifunc for
symbol in control frame proc to be marked.
* proc.c (proc_new), vm_insnhelper.c (vm_yield_with_cfunc):
block->proc may be an ifunc now.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51995 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* rb_call_info (ci) has compiled fixed information.
* if ci->flag & VM_CALL_KWARG, then rb_call_info is
also rb_call_info_with_kwarg. This technique reduce one word
for major rb_call_info data.
* rb_calling_info has temporary data (argc, blockptr, recv).
for each method dispatch. This data is allocated only on
machine stack.
* rb_call_cache is for inline method cache.
Before this patch, only rb_call_info_t data is passed.
After this patch, above three structs are passed.
This patch improves:
* data locarity (rb_call_info is now read-only data).
* reduce memory consumption (rb_call_info_with_kwarg,
rb_calling_info).
* compile.c: use above data.
* insns.def: ditto.
* iseq.c: ditto.
* vm_args.c: ditto.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
* vm_insnhelper.h: ditto.
* iseq.h: add iseq_compile_data::ci_index and
iseq_compile_data::ci_kw_indx.
* tool/instruction.rb: introduce TS_CALLCACHE operand type.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51903 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c: introduce shortcut functions for opt_pc == 0
because opt_pc is always 0 on shortcut function.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51827 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
stable after invoking a block. [Bug #11451]
* test/ruby/test_yield.rb: add a test. This test script is given by
Alex Dowad.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51651 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_setivar): cast to long both side of a
conditional expression to suppress a sign-compare warning.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51391 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
All contents of previous rb_iseq_t is in rb_iseq_t::body.
Remove rb_iseq_t::self because rb_iseq_t is an object.
RubyVM::InstructionSequence is wrapper object points T_IMEMO/iseq.
So RubyVM::ISeq.of(something) method returns different wrapper
objects but they point the same T_IMEMO/iseq object.
This patch is big, but most of difference is replacement of
iseq->xxx to iseq->body->xxx.
(previous) rb_iseq_t::compile_data is also located to
rb_iseq_t::compile_data.
It was moved from rb_iseq_body::compile_data.
Now rb_iseq_t has empty two pointers.
I will split rb_iseq_body data into static data and dynamic data.
* compile.c: rename some functions/macros.
Now, we don't need to separate iseq and iseqval (only VALUE).
* eval.c (ruby_exec_internal): `n' is rb_iseq_t (T_IMEMO/iseq).
* ext/objspace/objspace.c (count_imemo_objects): count T_IMEMO/iseq.
* gc.c: check T_IMEMO/iseq.
* internal.h: add imemo_type::imemo_iseq.
* iseq.c: define RubyVM::InstructionSequnce as T_OBJECT.
Methods are implemented by functions named iseqw_....
* load.c (rb_load_internal0): rb_iseq_new_top() returns
rb_iseq_t (T_IMEMO/iesq).
* method.h (rb_add_method_iseq): accept rb_iseq_t (T_IMEMO/iseq).
* vm_core.h (GetISeqPtr): removed because it is not T_DATA now.
* vm_core.h (struct rb_iseq_body): remove padding for
[Bug #10037][ruby-core:63721].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51327 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_iseq_t::local_iseq is not constant data because
local_iseq::flip_cnt can be modified (commentted).
* compile.c: catch up this fix.
* iseq.c: ditto.
* vm_insnhelper.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51269 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_callable_method_entry_t has information about defined class.
* vm_insnhelper.c (vm_search_method): don't set ci->klass because
it is removed.
* vm_insnhelper.c (rb_equal_opt): ditto.
* vm_insnhelper.c (vm_search_superclass): removed because it is too
simple to write code directly.
* vm_insnhelper.c (vm_defined): don't use vm_search_superclass().
This fix avoid searching current callable `me' twice.
* vm_insnhelper.c (vm_search_super_method): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51200 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* internal.h, iseq.c (rb_iseq_klass): remove it because
rb_iseq_t::klass is removed.
* vm_insnhelper.c (vm_super_outside): do not see cfp->iseq, but
check callable method entry on a frame.
This fix simplify the logic to search super class.
* test/ruby/test_method.rb: support super() from Proc.
Now, [Bug #4881] and [Bug #3136] was solved.
* proc.c (rb_mod_define_method): catch up this change.
* vm.c (vm_define_method): ditto.
* vm_backtrace.c (rb_profile_frames): now, each `frame' objects
are rb_callable_method_entry_t data or iseq VALUEs.
This fix introduce minor compatibility issue that
rb_profile_frame_label() always returns
rb_profile_frame_base_label().
* test/-ext-/debug/test_profile_frames.rb: catch up this change.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51166 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
same methods in super.
[Bug #3351]
* test/ruby/test_super.rb: fix a test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51161 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_control_frame_t::klass.
[Bug #11278], [Bug #11279]
rb_method_entry_t data belong to modules/classes.
rb_method_entry_t::owner points defined module or class.
module M
def foo; end
end
In this case, owner is M.
rb_callable_method_entry_t data belong to only classes.
For modules, MRI creates corresponding T_ICLASS internally.
rb_callable_method_entry_t can also belong to T_ICLASS.
rb_callable_method_entry_t::defined_class points T_CLASS or
T_ICLASS.
rb_method_entry_t data for classes (not for modules) are also
rb_callable_method_entry_t data because it is completely same data.
In this case, rb_method_entry_t::owner == rb_method_entry_t::defined_class.
For example, there are classes C and D, and incldues M,
class C; include M; end
class D; include M; end
then, two T_ICLASS objects for C's super class and D's super class
will be created.
When C.new.foo is called, then M#foo is searcheed and
rb_callable_method_t data is used by VM to invoke M#foo.
rb_method_entry_t data is only one for M#foo.
However, rb_callable_method_entry_t data are two (and can be more).
It is proportional to the number of including (and prepending)
classes (the number of T_ICLASS which point to the module).
Now, created rb_callable_method_entry_t are collected when
the original module M was modified. We can think it is a cache.
We need to select what kind of method entry data is needed.
To operate definition, then you need to use rb_method_entry_t.
You can access them by the following functions.
* rb_method_entry(VALUE klass, ID id);
* rb_method_entry_with_refinements(VALUE klass, ID id);
* rb_method_entry_without_refinements(VALUE klass, ID id);
* rb_resolve_refined_method(VALUE refinements, const rb_method_entry_t *me);
To invoke methods, then you need to use rb_callable_method_entry_t
which you can get by the following APIs corresponding to the
above listed functions.
* rb_callable_method_entry(VALUE klass, ID id);
* rb_callable_method_entry_with_refinements(VALUE klass, ID id);
* rb_callable_method_entry_without_refinements(VALUE klass, ID id);
* rb_resolve_refined_method_callable(VALUE refinements, const rb_callable_method_entry_t *me);
VM pushes rb_callable_method_entry_t, so that rb_vm_frame_method_entry()
returns rb_callable_method_entry_t.
You can check a super class of current method by
rb_callable_method_entry_t::defined_class.
* method.h: renamed from rb_method_entry_t::klass to
rb_method_entry_t::owner.
* internal.h: add rb_classext_struct::callable_m_tbl to cache
rb_callable_method_entry_t data.
We need to consider abotu this field again because it is only
active for T_ICLASS.
* class.c (method_entry_i): ditto.
* class.c (rb_define_attr): rb_method_entry() does not takes
defiend_class_ptr.
* gc.c (mark_method_entry): mark RCLASS_CALLABLE_M_TBL() for T_ICLASS.
* cont.c (fiber_init): rb_control_frame_t::klass is removed.
* proc.c: fix `struct METHOD' data structure because
rb_callable_method_t has all information.
* vm_core.h: remove several fields.
* rb_control_frame_t::klass.
* rb_block_t::klass.
And catch up changes.
* eval.c: catch up changes.
* gc.c: ditto.
* insns.def: ditto.
* vm.c: ditto.
* vm_args.c: ditto.
* vm_backtrace.c: ditto.
* vm_dump.c: ditto.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
* vm_method.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@51126 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_method_entry_t.
r50728 changed sharing `def's to isolating `def's
on alias and so on. However, this change conflicts
future improvement plan. So I change back to sharing approach.
* method.h: move rb_method_definition_t::flags to
rb_method_entry_t::attr::flags.
rb_method_entry_t::attr is union with VALUE because this field
should have same size of VALUE. rb_method_entry_t is T_IMEMO).
And also add the following access macros to it's fileds.
* METHOD_ENTRY_VISI(me)
* METHOD_ENTRY_BASIC(me)
* METHOD_ENTRY_SAFE(me)
* vm_method.c (rb_method_definition_addref): added instead of
rb_method_definition_clone().
Do not create new definition, but increment alias_count.
* class.c (clone_method): catch up this fix.
* class.c (method_entry_i): ditto.
* proc.c (mnew_internal): ditto.
* proc.c (mnew_missing): ditto.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
* vm_method.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50792 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval_intern.h: move definition of rb_scope_visibility_t
to method.h.
* method.h: change rb_cref_t::scope_visi from VALUE to
rb_scope_visibility_t.
[Bug #11219]
* vm.c (vm_cref_new): accept rb_method_visibility_t directly.
* vm_insnhelper.c (rb_vm_rewrite_cref): don't use 0,
but METHOD_VISI_UNDEF.
* vm_method.c (rb_scope_visibility_set): don't need to use cast.
* vm_method.c (rb_scope_module_func_set): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50782 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* class.c (clone_method): use renamed name.
* vm_insnhelper.c (rb_vm_rewrite_cref): do not use `node' in variable
names.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50752 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h: use enum method_missing_reason for
rb_thread_t::method_missing_reason.
* vm_eval.c: catch up this fix.
* vm_insnhelper.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50747 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
`flag' contains several categories of attributes and it makes us
confusion (at least, I had confused).
* rb_method_visibility_t (flags::visi)
* NOEX_UNDEF -> METHOD_VISI_UNDEF = 0
* NOEX_PUBLIC -> METHOD_VISI_PUBLIC = 1
* NOEX_PRIVATE -> METHOD_VISI_PRIVATE = 2
* NOEX_PROTECTED -> METHOD_VISI_PROTECTED = 3
* NOEX_SAFE(flag)) -> safe (flags::safe, 2 bits)
* NOEX_BASIC -> basic (flags::basic, 1 bit)
* NOEX_MODFUNC -> rb_scope_visibility_t in CREF
* NOEX_SUPER -> MISSING_SUPER (enum missing_reason)
* NOEX_VCALL -> MISSING_VCALL (enum missing_reason)
* NOEX_RESPONDS -> BOUND_RESPONDS (macro)
Now, NOEX_NOREDEF is not supported (I'm not sure it is needed).
Background:
I did not know what "NOEX" stands for.
I asked Matz (who made this name) and his answer was "Nothing".
"At first, it meant NO EXport (private), but the original
meaning was gone."
This is why I remove the mysterious word "NOEX" from MRI.
* vm_core.h: introduce `enum missing_reason' to represent
method_missing (NoMethodError) reason.
* eval_intern.h: introduce rb_scope_visibility_t to represent
scope visibility.
It has 3 method visibilities (public/private/protected)
and `module_function`.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50743 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
at defined?(func()).
* test/ruby/test_defined.rb: add a test for this fix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50738 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
a method is available.
[Bug #11211]
* test/ruby/test_defined.rb: add a test for this fix.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50737 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Motivation and new data structure are described in [Bug #11203].
This patch also solve the following issues.
* [Bug #11200] Memory leak of method entries
* [Bug #11046] __callee__ returns incorrect method name in orphan
proc
* test/ruby/test_method.rb: add a test for [Bug #11046].
* vm_core.h: remvoe rb_control_frame_t::me. me is located at value
stack.
* vm_core.h, gc.c, vm_method.c: remove unlinked_method... codes
because method entries are simple VALUEs.
* method.h: Now, all method entries has own independent method
definititons. Strictly speaking, this change is not essential,
but for future changes.
* rb_method_entry_t::flag is move to rb_method_definition_t::flag.
* rb_method_definition_t::alias_count is now
rb_method_definition_t::alias_count_ptr, a pointer to the counter.
* vm_core.h, vm_insnhelper.c (rb_vm_frame_method_entry) added to
search the current method entry from value stack.
* vm_insnhelper.c (VM_CHECK_MODE): introduced to enable/disable
assertions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50728 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm.c (vm_invoke_bmethod): bmethod does not need EXEC_TAG as it
does not set safe level.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@50568 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Add THROW_DATA_NEW().
* internal.h: move defnition of `struct THROW_DATA'
from vm_insnhelper.h to internal.h.
Rename `THROW_DATA' to `vm_throw_data'.
* eval_intern.h (THROW_DATA_P): move to internal.h.
THROW_DATA is no longer T_NODE, so check T_IMEMO.
* gc.c (gc_mark_children): mark THROW_DATA.
* vm.c: catch up these changes.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49936 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* internal.h, vm_insnhelper.h: move definition `struct SVAR'
from vm_insnhelper.h to internal.h. And rename it to strcut vm_svar.
new imemo_type imemo_svar is added.
* gc.c (gc_mark_children): mark imemo_svar.
* node.c (rb_gc_mark_node): remove useless marking.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49935 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
T_IMEMO is Internal Memo type, internal use only.
T_IMEMO has same purpose of NODE_MEMO.
To insert T_IMEMO, type numbers are modified a little.
* internal.h: define struct RIMemo. Each RIMemo objects
has imemo_type. We can observe it by the imemo_type() function.
* gc.c (rb_imemo_new): added.
* node.h: remove NODE_CREF and NEW_CREF().
* node.c (rb_gc_mark_node): ditto.
* vm.c (vm_cref_new): use rb_imem_new().
* vm_eval.c: ditto.
* vm_eval.c (eval_string_with_cref):
* vm_eval.c (rb_type_str):
* vm_insnhelper.c: use RIMemo objects for CREF.
* ext/objspace/objspace.c: support T_IMEMO.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49932 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
throwing data. Also define accessor functions.
* eval_intern.h: move related changes into vm_insnhelper.h.
Now these MACROs (functions) are only used in vm*.c.
There is only THROW_DATA_P(err) to check this data type or not.
* vm.c: catch up these changes.
* vm_eval.c: ditto.
* vm_insnhelper.c: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49921 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This data type is also same layout of NODE (NODE_IF).
* vm_insnhelper.c: catch up this change.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49899 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_cref_t is data type of CREF. Now, the body is still NODE.
It is easy to understand what is CREF and what is pure NODE.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49897 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* CREF_CLASS(cref)
* CREF_NEXT(cref)
* CREF_VISI(cref)
* CREF_VISI_SET(cref, v)
* CREF_REFINEMENTS(cref)
* CREF_PUSHED_BY_EVAL(cref)
* CREF_PUSHED_BY_EVAL_SET(cref)
* CREF_OMOD_SHARED(cref)
* CREF_OMOD_SHARED_SET(cref)
* CREF_OMOD_SHARED_UNSET(cref)
This is process to change CREF data type from NODE.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49894 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h, method.h: remove rb_iseq_t::cref_stack. CREF is stored
to rb_method_definition_t::body.iseq_body.cref.
* vm_insnhelper.c: modify SVAR usage.
When calling ISEQ type method, push CREF information onto method
frame, SVAR located place. Before this fix, SVAR is simply nil.
After this patch, CREF (or NULL == Qfalse for not iseq methods)
is stored at the method invocation.
When SVAR is requierd, then put NODE_IF onto SVAR location,
and NDOE_IF::nd_reserved points CREF itself.
* vm.c (vm_cref_new, vm_cref_dump, vm_cref_new_toplevel): added.
* vm_insnhelper.c (vm_push_frame): accept CREF.
* method.h, vm_method.c (rb_add_method_iseq): added. This function
accepts iseq and CREF.
* class.c (clone_method): use rb_add_method_iseq().
* gc.c (mark_method_entry): mark method_entry::body.iseq_body.cref.
* iseq.c: remove CREF related codes.
* insns.def (getinlinecache/setinlinecache): CREF should be cache key
because a different CREF has a different namespace.
* node.c (rb_gc_mark_node): mark NODE_IF::nd_reserved for SVAR.
* proc.c: catch up changes.
* struct.c: ditto.
* insns.def: ditto.
* vm_args.c (raise_argument_error): ditto.
* vm_eval.c: ditto.
* test/ruby/test_class.rb: add a test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49874 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
of orignal crefs. It fixes segmentation fault when calling
refined method in duplicate module. [ruby-dev:48878] [Bug #10885]
* vm_core.h, class.c: change accordingly.
* test/ruby/test_refinement.rb: add a test for above.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49685 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
is not found in a refinement, to support undef in refinements.
[ruby-core:66741] [Bug #10578]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49554 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (send_internal), vm_insnhelper.c (vm_call_opt_send):
convert String method name into a Symbol, as method_missing
method expects its first argument to be a Symbol. [Bug #10828]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49506 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Creates a regression in test_drb. Above my rubyfu. [#10828]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49502 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_throw_start): search the target to break
from a block with nested rescue, from the nested blocks.
[ruby-core:67765] [Bug #10775] [Fix GH-820]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49390 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
change throw mechanism (not save target ep, but save target cfp).
It fixes `unexpected break' bug that occurs when
TracePoint#binding is called.
[ruby-dev:48797] [Bug #10689]
* test/ruby/test_settracefunc.rb: add a test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@49266 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
For example, the following program
def foo(k1: 1); end # line 1
foo(k2: 2) # line 2
causes "unknown keyword: k2 (ArgumentError)".
Before this patch, the backtrace location is only line 2.
However, error should be located at line 1 (over line 2 in
stack trace). This patch fix this problem.
* class.c (rb_keyword_error_new): separate exception creation logic
from rb_keyword_error(), to use in vm_args.c.
* vm_insnhelper.c (rb_arg_error_new): rename to rb_arity_error_new().
* vm_args.c (argument_arity_error): rename to argument_arity_error().
* vm_args.c (arugment_kw_error): added to fix backtrace.
* test/ruby/test_keyword.rb: add tests.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48608 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (rb_method_call_status): preserve encoding of called method
name in error messages.
* vm_insnhelper.c (vm_call_method): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48572 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_eval.c (vm_call_super): allow bound proc method to call super
method.
* vm_insnhelper.c (vm_yield_with_cfunc): push defined class and
bound proc method entry to the control frame.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48348 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
https://bugs.ruby-lang.org/issues/10440#change-49694
* change terminology `arg' to `param'.
* move rb_iseq_t::arg_* to rb_iseq_t::param.
* move rb_iseq_t::arg_size to rb_iseq_t::param::size.
* move rb_iseq_t::argc to rb_iseq_t::param::lead_num.
* move rb_iseq_t::arg_opts to rb_iseq_t::param::opt_num.
* move rb_iseq_t::arg_rest to rb_iseq_t::param::rest_start.
* move rb_iseq_t::arg_post_num to rb_iseq_t::param::post_num.
* move rb_iseq_t::arg_post_start to rb_iseq_t::param::post_start.
* move rb_iseq_t::arg_block to rb_iseq_t::param::block_start.
* move rb_iseq_t::arg_keyword* to rb_iseq_t::param::keyword.
rb_iseq_t::param::keyword is allocated only when keyword
parameters are available.
* introduce rb_iseq_t::param::flags to represent parameter
availability. For example, rb_iseq_t::param:🎏:has_kw
represents that this iseq has keyword parameters and
rb_iseq_t::param::keyword is allocated.
We don't need to compare with -1 to check availability.
* remove rb_iseq_t::arg_simple.
* compile.c: catch up this change.
* iseq.c: ditto.
* proc.c: ditto.
* vm.c, vm_args.c, vm_dump.c, vm_insnhelper.c: ditto.
* iseq.c (iseq_data_to_ary): support keyword argument.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48242 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
keyword arguments/parameters and a splat argument.
[Feature #10440] (Details are described in this ticket)
Most of complex part is moved to vm_args.c.
Now, ISeq#to_a does not catch up new instruction format.
* vm_core.h: change iseq data structures.
* introduce rb_call_info_kw_arg_t to represent keyword arguments.
* add rb_call_info_t::kw_arg.
* rename rb_iseq_t::arg_post_len to rb_iseq_t::arg_post_num.
* rename rb_iseq_t::arg_keywords to arg_keyword_num.
* rename rb_iseq_t::arg_keyword to rb_iseq_t::arg_keyword_bits.
to represent keyword bitmap parameter index.
This bitmap parameter shows that which keyword parameters are given
or not given (0 for given).
It is refered by `checkkeyword' instruction described bellow.
* rename rb_iseq_t::arg_keyword_check to rb_iseq_t::arg_keyword_rest
to represent keyword rest parameter index.
* add rb_iseq_t::arg_keyword_default_values to represent default
keyword values.
* rename VM_CALL_ARGS_SKIP_SETUP to VM_CALL_ARGS_SIMPLE
to represent
(ci->flag & (SPLAT|BLOCKARG)) &&
ci->blockiseq == NULL &&
ci->kw_arg == NULL.
* vm_insnhelper.c, vm_args.c: rewrite with refactoring.
* rewrite splat argument code.
* rewrite keyword arguments/parameters code.
* merge method and block parameter fitting code into one code base.
* vm.c, vm_eval.c: catch up these changes.
* compile.c (new_callinfo): callinfo requires kw_arg parameter.
* compile.c (compile_array_): check the last argument Hash object or
not. If Hash object and all keys are Symbol literals, they are
compiled to keyword arguments.
* insns.def (checkkeyword): add new instruction.
This instruction check the availability of corresponding keyword.
For example, a method "def foo k1: 'v1'; end" is cimpiled to the
following instructions.
0000 checkkeyword 2, 0 # check k1 is given.
0003 branchif 9 # if given, jump to address #9
0005 putstring "v1"
0007 setlocal_OP__WC__0 3 # k1 = 'v1'
0009 trace 8
0011 putnil
0012 trace 16
0014 leave
* insns.def (opt_send_simple): removed and add new instruction
"opt_send_without_block".
* parse.y (new_args_tail_gen): reorder variables.
Before this patch, a method "def foo(k1: 1, kr1:, k2: 2, **krest, &b)"
has parameter variables "k1, kr1, k2, &b, internal_id, krest",
but this patch reorders to "kr1, k1, k2, internal_id, krest, &b".
(locate a block variable at last)
* parse.y (vtable_pop): added.
This function remove latest `n' variables from vtable.
* iseq.c: catch up iseq data changes.
* proc.c: ditto.
* class.c (keyword_error): export as rb_keyword_error().
* common.mk: depend vm_args.c for vm.o.
* hash.c (rb_hash_has_key): export.
* internal.h: ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48239 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_callee_setup_arg{_complex,}): try conversion
by to_ary for a lambda, as well as a proc.
[ruby-core:65887] [Bug #9605]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48193 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* variable.c (rb_ivar_get), vm_insnhelper.c (vm_getivar): improve
instance variable retrieval performance by checking ruby_verbose
before call of rb_warning and evaluation of its argument.
[ruby-core:65786] [Feature #10396]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@48035 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This keeps ci->flag and ci->aux.index consistent across 32-bit
and 64-bit platforms.
ci->flag: VM_CALL_* flags only use 9 bits, currently
ci->aux.index: 2 billion ivars per class should be enough for anybody
This saves around 50K allocations on "valgrind ruby -e exit" on x86-64
before:
total heap usage: 48,122 allocs, 19,253 frees, 8,099,197 bytes allocated
after:
total heap usage: 48,069 allocs, 19,214 frees, 8,047,266 bytes allocated
* vm_core.h (rb_call_info_t): ci->flag becomes 32-bit unsigned int
ci->index becomes a 32-bit signed int (from signed long).
Reorder for better packing on 64-bit, giving an 8 byte reduction
from 104 to 96 bytes for each ci.
* compile.c (new_callinfo, setup_args, iseq_compile_each,
iseq_build_from_ary_body): adjust for type changes
* vm_insnhelper.c (vm_getivar): ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47509 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* variable.c: cleanup to use rb_const_lookup
* vm_insnshelper.c: ditto
This reduces casting and long lines. This should make it easier to
switch to alternatives to st for constant storage.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47059 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_call_method): unusable super class should cause
method missing when BasicObject is refined but not been using.
[ruby-core:64166] [Bug #10106]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@47037 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
because all calculations related to stack_max in compile.c
(iseq_set_sequence) and vm_insnhelper.c (vm_push_frame) are
conducted by using int. This partly reverts r23945.
* vm_insnhelper.c (vm_push_frame): ditto. This reverts r42401.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46839 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Most iseq do not have a catch_table, so avoid needlessly adding
4-8 bytes to the struct for the common case.
Changes from v2:
- iseq_catch_table_size removed, use if (...) for (;...;)
Changes from v1:
- renamed iseq->_catch_table to iseq->catch_table
- iseq_catch_table_bytes: made a static inline function
- iseq_catch_table_size: new function replaces the
iseq_catch_table_each iterator macro
* iseq.h (struct iseq_catch_table): new flexible array struct
(iseq_catch_table_bytes): allocated size function
* vm_core.h (struct rb_iseq_struct): uupdate catch_table member
* compile.c (iseq_set_exception_table): update for struct changes
* iseq.c (iseq_free): ditto
* iseq.c (iseq_memsize): ditto
* iseq.c (rb_iseq_disasm): ditto
* iseq.c (iseq_data_to_ary): ditto
* iseq.c (rb_iseq_build_for_ruby2cext): ditto (untested)
* vm.c (vm_exec): ditto
* vm_core.h (struct rb_iseq_struct): ditto
* vm_insnhelper.c (vm_throw): ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46811 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_callee_setup_keyword_arg): adjust VM stack
pointer to get rid of overwriting splat arguments by arguments
for `to_hash` conversion. [ruby-core:63593] [Bug #10016]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46775 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (setup_exception): get rid of method calls before raising
stack overflow, not to cause stack overflow again.
* defs/id.def: add IDs for backtraces.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46593 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* eval.c (setup_exception): set backtrace in system stack error
other than the pre-allocated sysstack_error. [Feature #6216]
* proc.c (Init_Proc): freeze the pre-allocated sysstack_error.
* vm_insnhelper.c (vm_stackoverflow): raise new instance for each
times without calling any methods to keep the backtrace with no
further stack overflow.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46502 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* insns.def (once), vm_insnhelper.c (vm_once_exec): turn the
parameter into a VALUE to get rid of type-punned pointer cast.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@46478 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
it is bmethod frame.
* vm.c (vm_exec): invoke RUBY_EVENT_RETURN event if rollbacked frame
is VM_FRAME_FLAG_BMETHOD.
[Bug #9759]
* test/ruby/test_settracefunc.rb: add a test for TracePoint/set_trace_func.
* vm_core.h: renmae rb_thread_t::passed_me to
rb_thread_t::passed_bmethod_me to clarify the usage.
* vm_insnhelper.c (vm_call_bmethod_body): use renamed member.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45758 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_callee_setup_arg): disable fastpath if splat
argument, since argc may differ for each calls.
[ruby-core:61422] [Bug #9622]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45321 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_callee_setup_arg): turn a macro into an
inline function.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@45320 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
a refining method in case the method is private.
[ruby-core:60111] [Bug #9452]
* vm_method.c (make_method_entry_refined): set me->flag of a refined
method entry to NOEX_PUBLIC in case the original method is private
and it is refined as a public method. The original flag is stored
in me->def->body.orig_me, so it's OK to make a refined method
entry public. [ruby-core:60111] [Bug #9452]
* test/ruby/test_refinement.rb: related tests.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44931 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_search_super_method): when super called in a
bound UnboundMethod generated from a module, no superclass is
found since the current defined class is the module, then call
method_missing in that case. [ruby-core:59619] [Bug #9377]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44527 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_search_super_method): direct superclass of a
module is found when super called in a Method object generated a
method defined in a module, call method_missing in that case.
[ruby-core:59358] [Bug #9315]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44455 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
a backtrace object intead of modify backtrace string array.
[Bug #9295]
* test/ruby/test_backtrace.rb: add a test for this patch.
fix test to compare a result of Exception#backtrace with
a result of Exception#backtrace_locations.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44411 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_call_iseq_setup_normal): simple for loop
condition optimization. this area shows up as a hotspot in VM
profiles.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44285 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
vm_insnhelper.c, vm_insnhelper.h, vm_method.c: Rename method_serial
to global_method_state and constant_serial to global_constant_state
after discussion with ko1.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44097 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (rb_get_kwargs): get keyword argument values from an
option hash, not only checking keys.
* dir.c (dir_initialize): use rb_get_kwargs.
* gc.c (gc_start_internal): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@44035 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
and class of `pattern` has `method_missing`
[Bug #8882] [ruby-core:58606]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43913 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
ic_serial. This is possible because these fields are only ever used
exclusively with each other.
* insns.def: ditto
* vm_core.h: ditto
* vm_insnhelper.c: ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43596 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
ruby_vm_global_state_version into two separate counters - one for the
global method state and one for the global constant state. This means
changes to constants do not affect method caches, and changes to
methods do not affect constant caches. In particular, this means
inclusions of modules containing constants no longer globally
invalidate the method cache.
* class.c, eval.c, include/ruby/intern.h, insns.def, vm.c, vm_method.c:
rename rb_clear_cache_by_class to rb_clear_method_cache_by_class
* class.c, include/ruby/intern.h, variable.c, vm_method.c: add
rb_clear_constant_cache
* compile.c, vm_core.h, vm_insnhelper.c: rename vmstat field in
rb_call_info_struct to method_state
* vm_method.c: rename vmstat field in struct cache_entry to method_state
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43455 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
original method of a refined method is undef to avoid SEGV.
* vm_method.c (rb_method_entry_without_refinements): return 0 when
the original method of a refined method is undef to avoid SEGV.
* test/ruby/test_refinement.rb: related test.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43334 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Type of return value of rb_iseq_first_lineno() is now VALUE.
* vm_insnhelper.c (argument_error): ditto.
* vm_method.c (rb_method_entry_make): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43163 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* VALUE rb_iseq_path(VALUE iseqval);
* VALUE rb_iseq_absolute_path(VALUE iseqval);
* VALUE rb_iseq_label(VALUE iseqval);
* VALUE rb_iseq_base_label(VALUE iseqval);
* VALUE rb_iseq_first_lineno(VALUE iseqval);
And new (temporary) function:
* VALUE rb_iseq_klass(VALUE iseqval);
* iseq.c. vm_core.h (int rb_iseq_first_lineno): remove
function `int rb_iseq_first_lineno(const rb_iseq_t *iseq)'.
Use `VALUE rb_iseq_first_lineno(VALUE iseqval)' instead.
* proc.c. vm_insnhelper.c, vm_method.c: catch up this change.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43162 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
clear keyword arguments to prevent GC bug which occurs
while marking VM stack.
[ruby-dev:47729] [Bug #8964]
* test/ruby/test_keyword.rb: tests for the above.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43081 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
RARRAY_RAWPTR(ary) returns (const VALUE *) type pointer and
usecase of this macro is not acquire raw pointer, but acquire
read-only pointer. So we rename to better name.
RSTRUCT_RAWPTR() is also renamed to RSTRUCT_CONST_PTR()
(I expect that nobody use it).
* array.c, compile.c, cont.c, enumerator.c, gc.c, proc.c, random.c,
string.c, struct.c, thread.c, vm_eval.c, vm_insnhelper.c:
catch up this change.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@43043 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
type ID, not VALUE
* vm_insnhelper.c (check_match): the rb_funcall family of functions
does not care about refinements. We need to use
rb_method_entry_with_refinements instead to call === with
refinements. Thanks to Jon Conley for reporting this bug.
[ruby-core:57051] [Bug #8872]
* test/ruby/test_refinement.rb: add test
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42869 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
identity, instead of pointer + vm state
* vm_insnhelper.c (vm_setivar): ditto
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42841 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
in method cache guard - class sequence number has the same uniqueness
guarantees
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42836 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
ci->orig_argc. ci->argc can be changed by splat arguments.
[ruby-list:49575]
This fix should be applied to Ruby 2.0.0 seriese.
* test/ruby/test_super.rb: add a test for above.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42782 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_call_method): a method entry refers the based
class/module, so should search superclass from the origin i-class
where the entry belongs to, to get rid of infinite loop when zsuper
in a prepended class/module. [ruby-core:54105] [Bug #8238]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42724 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_search_method): reduce duplicated code for the
case cache does not hit.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42703 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
now always exits from the Proc. [ruby-core:56193] [Feature #8693]
* NEWS, test/ruby/test_lambda.rb: ditto. Patch by nobu.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42455 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Stack overflow check should be done *after* pushing a stack frame.
However, some stack overflow checking codes checked *before*
pushing a stack frame with iseq->stack_max.
To solve this problem, add a new parameter `stack_max' to specify
a possible consuming stack size.
* vm_core.h (CHECK_VM_STACK_OVERFLOW0): add to share the stack overflow
checking code.
* insns.def: catch up this change.
* vm.c, vm_eval.c: ditto.
* test/ruby/test_exception.rb: add a stack overflow test.
This code is reported by nobu.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42398 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
RARRAY_PTR() because there is no new reference.
* vm_insnhelper.c (vm_caller_setup_args): ditto.
* vm_insnhelper.c (vm_yield_setup_block_args): ditto.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@42152 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
VM_METHOD_TYPE_ATTR_SET are called with 1 argument
* test/ruby/test_module.rb (class TestModule): add test
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@41389 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
new function to invoke a method with a block passed
as an argument.
* string.c (sym_call): use the above function to avoid
a block sharing. [ruby-dev:47438] [Bug #8531]
* vm_insnhelper.c (vm_yield_with_cfunc): don't set block
in the frame.
* test/ruby/test_symbol.rb (TestSymbol#test_block_given_to_proc):
run related tests.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@41360 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_yield_setup_block_args): split single parameter
if any keyword arguments exist, and then extract keyword arguments.
[ruby-core:55203] [Bug #8463]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@41020 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_yield_setup_block_args): break a long line and
add comments. remove useless code.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@41019 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
ko1
nobu
watson1978
normal
shyouhei
svn
kazu
ktsj
hsbt
shugo
naruse
akr
tarui
duerst
nagachika
marcandre
ngoto
tmm1
charliesome
sorah